# Copyright (c) 2000-2025 Synology Inc. All rights reserved.

[*filebrowser*]
filebrowser_notify_email_failed	=	"Category: System
Level: NOTIFICATION_ERROR
Desktop: %APP% failed to send email from %FROM% to %TO%. Error: %ERR%. %MSG%."
filebrowser_notify_email_success	=	"Category: System
Level: NOTIFICATION_INFO
Desktop: %APP% successfully sent email from %FROM% to %TO%."

[*mail*]
TPLUNReachHardLimit	=	"Category: Storage,Important
Title: LUN is protected
Subject: LUN on volume %VOLUME_ID% on %HOSTNAME% is protected to prevent filesystem crash

Dear user,

There is less than 1 GB of free space on volume %VOLUME_ID% on %HOSTNAME%, so LUN [%LUN_NAME%] is now protected to prevent filesystem crash and you cannot write data to it. More information can be found in iSCSI Manager.

From %HOSTNAME%"
TPLUNReachLowHardLimit	=	"Category: Storage,Important
Title: LUN's volume out of space
Subject: Volume %VOLUME_ID% on %HOSTNAME% has run out of space, and LUN is protected

Dear user,

Volume %VOLUME_ID% on %HOSTNAME% has run out of free space. LUN [%LUN_NAME%] is now protected to prevent filesystem crash, so you cannot write data to it. Go to iSCSI Manager for more information.

From %HOSTNAME%"

[Country]
A1	=	"System Reserved (Anonymous Proxy)"
A2	=	"System Reserved (Satellite Provider)"
AD	=	"Andorra"
AE	=	"United Arab Emirates"
AF	=	"Afghanistan"
AG	=	"Antigua & Barbuda"
AI	=	"Anguilla"
AL	=	"Albania"
AM	=	"Armenia"
AO	=	"Angola"
AP	=	"Asia-Pacific Region"
AQ	=	"Antarctica"
AR	=	"Argentina"
AS	=	"American Samoa"
AT	=	"Austria"
AU	=	"Australia"
AW	=	"Aruba"
AX	=	"Åaland Island"
AZ	=	"Azerbaijan"
BA	=	"Bosnia & Herzegovina"
BB	=	"Barbados"
BD	=	"Bangladesh"
BE	=	"Belgium"
BF	=	"Burkina"
BG	=	"Bulgaria"
BH	=	"Bahrain"
BI	=	"Burundi"
BJ	=	"Benin"
BL	=	"Saint Barthélemy"
BM	=	"Bermuda"
BN	=	"Brunei"
BO	=	"Bolivia"
BQ	=	"Caribbean Netherlands"
BR	=	"Brazil"
BS	=	"The Bahamas"
BT	=	"Bhutan"
BV	=	"Bouvet Island"
BW	=	"Botswana"
BY	=	"Belarus"
BZ	=	"Belize"
CA	=	"Canada"
CC	=	"Cocos (Keeling) Islands"
CD	=	"Democratic Republic of the Congo"
CF	=	"Central African Republic"
CG	=	"Republic of the Congo"
CH	=	"Switzerland"
CI	=	"Côte d'Ivoire"
CK	=	"Cook Islands"
CL	=	"Chile"
CM	=	"Cameroon"
CN	=	"China"
CO	=	"Colombia"
CR	=	"Costa Rica"
CU	=	"Cuba"
CV	=	"Cape Verde"
CW	=	"Curaçao"
CX	=	"Christmas Island"
CY	=	"Cyprus"
CZ	=	"Czech Republic"
DE	=	"Germany"
DJ	=	"Djibouti"
DK	=	"Denmark"
DM	=	"Dominica"
DO	=	"Dominican Republic"
DZ	=	"Algeria"
EC	=	"Ecuador"
EE	=	"Estonia"
EG	=	"Egypt"
EH	=	"Western Sahara"
ER	=	"Eritrea"
ES	=	"Spain"
ET	=	"Ethiopia"
EU	=	"Europe"
FI	=	"Finland"
FJ	=	"Fiji"
FK	=	"Falkland Islands"
FM	=	"Federated States of Micronesia"
FO	=	"Faroe Islands"
FR	=	"France"
GA	=	"Gabon"
GB	=	"Great Britain (United Kingdom; England)"
GD	=	"Grenada"
GE	=	"Georgia"
GF	=	"French Guiana"
GG	=	"Guernsey"
GH	=	"Ghana"
GI	=	"Gibraltar"
GL	=	"Greenland"
GM	=	"Gambia"
GN	=	"Guinea"
GP	=	"Guadeloupe"
GQ	=	"Equatorial Guinea"
GR	=	"Greece"
GS	=	"South Georgia and the South Sandwich Islands"
GT	=	"Guatemala"
GU	=	"Guam"
GW	=	"Guinea-Bissau"
GY	=	"Guyana"
HK	=	"Hong Kong"
HM	=	"Heard Island and McDonald Islands"
HN	=	"Honduras"
HR	=	"Croatia"
HT	=	"Haiti"
HU	=	"Hungary"
ID	=	"Indonesia"
IE	=	"Ireland"
IL	=	"Israel"
IM	=	"Isle of Man"
IN	=	"India"
IO	=	"British Indian Ocean Territory"
IQ	=	"Iraq"
IR	=	"Iran"
IS	=	"Iceland"
IT	=	"Italy"
JE	=	"Jersey"
JM	=	"Jamaica"
JO	=	"Jordan"
JP	=	"Japan"
KE	=	"Kenya"
KG	=	"Kyrgyzstan"
KH	=	"Cambodia"
KI	=	"Kiribati"
KM	=	"The Comoros"
KN	=	"St. Kitts & Nevis"
KP	=	"North Korea"
KR	=	"South Korea"
KW	=	"Kuwait"
KY	=	"Cayman Islands"
KZ	=	"Kazakhstan"
LA	=	"Laos"
LB	=	"Lebanon"
LC	=	"St. Lucia"
LI	=	"Liechtenstein"
LK	=	"Sri Lanka"
LR	=	"Liberia"
LS	=	"Lesotho"
LT	=	"Lithuania"
LU	=	"Luxembourg"
LV	=	"Latvia"
LY	=	"Libya"
MA	=	"Morocco"
MC	=	"Monaco"
MD	=	"Moldova"
ME	=	"Montenegro"
MF	=	"Saint Martin (France)"
MG	=	"Madagascar"
MH	=	"Marshall islands"
MK	=	"Republic of Macedonia (FYROM)"
ML	=	"Mali"
MM	=	"Myanmar (Burma)"
MN	=	"Mongolia"
MO	=	"Macao"
MP	=	"Northern Mariana Islands"
MQ	=	"Martinique"
MR	=	"Mauritania"
MS	=	"Montserrat"
MT	=	"Malta"
MU	=	"Mauritius"
MV	=	"Maldives"
MW	=	"Malawi"
MX	=	"Mexico"
MY	=	"Malaysia"
MZ	=	"Mozambique"
NA	=	"Namibia"
NC	=	"New Caledonia"
NE	=	"Niger"
NF	=	"Norfolk Island"
NG	=	"Nigeria"
NI	=	"Nicaragua"
NL	=	"Netherlands"
NO	=	"Norway"
NP	=	"Nepal"
NR	=	"Nauru"
NU	=	"Niue"
NZ	=	"New Zealand"
OM	=	"Oman"
PA	=	"Panama"
PE	=	"Peru"
PF	=	"French polynesia"
PG	=	"Papua New Guinea"
PH	=	"The Philippines"
PK	=	"Pakistan"
PL	=	"Poland"
PM	=	"Saint-Pierre and Miquelon"
PN	=	"Pitcairn Islands"
PR	=	"Puerto Rico"
PS	=	"Palestinian territories"
PT	=	"Portugal"
PW	=	"Palau"
PY	=	"Paraguay"
QA	=	"Qatar"
RE	=	"Réunion"
RO	=	"Romania"
RS	=	"Serbia"
RU	=	"Russian Federation"
RW	=	"Rwanda"
SA	=	"Saudi Arabia"
SB	=	"Solomon Islands"
SC	=	"Seychelles"
SD	=	"Sudan"
SE	=	"Sweden"
SG	=	"Singapore"
SH	=	"St. Helena & Dependencies"
SI	=	"Slovenia"
SJ	=	"Svalbard and Jan Mayen"
SK	=	"Slovakia"
SL	=	"Sierra Leone"
SM	=	"San Marino"
SN	=	"Senegal"
SO	=	"Somalia"
SR	=	"Suriname"
SS	=	"South Sudan"
ST	=	"Sao Tome & Principe"
SV	=	"El Salvador"
SX	=	"Sint Maarten"
SY	=	"Syria"
SZ	=	"Swaziland"
TC	=	"Turks & Caicos Islands"
TD	=	"Chad"
TF	=	"French Southern Territories"
TG	=	"Togo"
TH	=	"Thailand"
TJ	=	"Tajikistan"
TK	=	"Tokelau"
TL	=	"Timor-Leste (East Timor)"
TM	=	"Turkmenistan"
TN	=	"Tunisia"
TO	=	"Tonga"
TR	=	"Turkey"
TT	=	"Trinidad & Tobago"
TV	=	"Tuvalu"
TW	=	"Taiwan"
TZ	=	"Tanzania"
UA	=	"Ukraine"
UG	=	"Uganda"
UM	=	"United States Minor Outlying Islands"
US	=	"United States of America (USA)"
UY	=	"Uruguay"
UZ	=	"Uzbekistan"
VA	=	"Vatican City (The Holy See)"
VC	=	"St. Vincent & the Grenadines"
VE	=	"Venezuela"
VG	=	"British Virgin Islands"
VI	=	"United States Virgin Islands"
VN	=	"Vietnam"
VU	=	"Vanuatu"
WF	=	"Wallis and Futuna"
WS	=	"Samoa"
XK	=	"Kosovo"
YE	=	"Yemen"
YT	=	"Mayotte"
ZA	=	"South Africa"
ZM	=	"Zambia"
ZW	=	"Zimbabwe"

[about]
about_synology	=	"About Synology"
check_for_update	=	"Checking for updates..."
dsm	=	"DiskStation Manager"
eula	=	"Software EULA"
terms	=	"Legal Terms"
update_available	=	"Update available"
update_package_tip	=	"Go to <b>DSM</b> > <b>Package Center</b> to update your package."
update_up_to_date	=	"Your version is up to date."
version_desc	=	"Version"
whats_new	=	"What’s new in DSM 7.0"

[acl_editor]
acl_rules_reach_limit	=	"ACL explicit permissions exceeds the maximum number of entries."
acl_rules_reach_limit_report	=	"Estimated number of entries: _count_ / Maximum number of entries: _maxCount_"
add_inherited	=	"Include inherited permissions"
admin_cannot_set_acl_per	=	"The changes you made will not be applied because the administrator account "{0}" has full privilege control."
admin_cannot_set_acl_perm	=	"The changes you made will not be applied because the administrator account "{0}" has full privilege control."
adming_shouldnt_set_acl_perm	=	"{0} belongs to the administrators group and should have full file transfer permissions. Therefore, this permission rule will not be applied to File Station or file protocols at Control Panel > File Services. Are you sure you want to create this rule?"
administration	=	"Administration"
alert_set_self_denied_acl	=	"When this setting is applied, you will be denied access to this shared folder. Are you sure you want to apply this setting?"
all_descendants	=	"All descendants"
all_scope	=	"All"
allow	=	"Allow"
apply_to	=	"Apply to"
change_permissions	=	"Change permissions"
child_files	=	"Child files"
child_folders	=	"Child folders"
create_files_write_data	=	"Create files/Write data"
create_folders_append_data	=	"Create folders/Append data"
delete	=	"Delete"
delete_subfolders_and_files	=	"Delete subfolders and files"
deny	=	"Deny"
domain_scope_domain	=	"Domain"
domain_scope_ou	=	"OU"
effective_permission_inspector	=	"Permission Inspector"
error_empty_apply_to	=	"Please select at least one item from "Applies to"."
error_empty_permission	=	"Please select at least one permission."
error_invalid_user_or_group	=	"Please specify a valid user or group."
error_privilage_mode	=	"This shared folder is now changed to the {0} mode. Click the refresh button for the changes to take effect."
error_unknown_user_or_group	=	"The user or group has been removed."
error_xattr_exceeded	=	"Unable to store more ACL entries. Please check the usage and quota of the volume and shared folder to ensure there is sufficient capacity for storing ACL entries."
inheriet_from	=	"Inherit from"
list_folder_read_data	=	"List folders/Read data"
make_inherited_explicit	=	"Make inherited permissions explicit"
not_inherited	=	"None"
perm_custom	=	"Custom"
perm_full_control	=	"Full Control"
permission	=	"Permission"
permission_editor	=	"Permission Editor"
permission_viewer	=	"Permission Viewer"
quota_exceeded	=	"User disk quota exceeded."
read_attributes	=	"Read attributes"
read_extended_atrributes	=	"Read extended attributes"
read_permissions	=	"Read permissions"
remove_inherited	=	"Exclude inherited permissions"
take_ownership	=	"Take ownership"
this_folder	=	"This folder"
travers_folder_execute_file	=	"Traverse folders/Execute files"
type	=	"Type"
unrecognized_note	=	"Owners of some permissions no longer exist. {0}"
unrecognized_user_group	=	"Unknown user/group: {0}"
user_or_group	=	"User or group"
usrgrp_emptytext	=	"Search name"
usrgrp_emptytext_with_other	=	"Search name or {0}"
usrgrp_filteroption_description	=	"Description"
usrgrp_filteroption_description_inline	=	"description"
usrgrp_filteroption_email	=	"Email"
usrgrp_filteroption_email_inline	=	"email"
usrgrp_filteroption_fullname	=	"Full name"
usrgrp_filteroption_fullname_inline	=	"full name"
view	=	"View"
write_attributes	=	"Write attributes"
write_extended_attributes	=	"Write extended attributes"

[addon]
access_key	=	"Access Key:"
container	=	"Container:"
container_name_dash_limit	=	"Must not contain dashes (-) immediately before or after another dash."
container_name_invalid_short	=	"This container name is invalid."
container_name_letter_limit	=	"Can contain lowercase letters, numbers, and dashes (-)."
container_name_meet_condition	=	"A valid container name should follow the following rules"
create_container	=	"Create a new container"
load_containers	=	"Retrieving containers"
name	=	"Microsoft Azure Backup Destination"
repo_name_prefix	=	"Microsoft Azure Storage"
repo_wizard_desc	=	"Back up data to a Microsoft Azure server."
repo_wizard_headline	=	"Back up data to Microsoft Azure"
repo_wizard_name	=	"Microsoft Azure Backup Destination"
restore_wizard_desc	=	"Restore data from Microsoft Azure server"
restore_wizard_headline	=	"Enter Microsoft Azure login information"
restore_wizard_name	=	"Microsoft Azure restoration"
select_container	=	"Select container:"
select_create_container	=	"Select or create a container"
storage_account	=	"Storage Account Name:"
task_name_prefix	=	"Microsoft Azure Backup Set"

[app_port_alias]
access_control_rules	=	"Access Control Rules"
app_desc	=	"Allow users to sign in to applications directly in a new browser window without signing in to _OSNAME_"
confirm_delete_profile	=	"Are you sure you want to delete this profile?"
confirm_delete_proxy	=	"Are you sure you want to delete this rule?"
confirm_delete_rule	=	"Are you sure you want to delete this rule?"
desc_acl	=	"Access control profile"
desc_alias	=	"Alias"
desc_all	=	"All"
desc_allow	=	"Allow"
desc_allow_or_deny	=	"Allow / Deny"
desc_application	=	"Application"
desc_appportalias	=	"Users can sign in to applications directly in a new browser window without signing in to _OSNAME_ once the customized alias or ports are enabled."
desc_deny	=	"Deny"
desc_domain	=	"Domain"
desc_edit_alias_rule	=	"Edit Alias Rules"
desc_edit_application	=	"Application Access Rules"
desc_edit_port_alias_rules	=	"Edit Port/Alias Rules"
desc_edit_reverse_proxy	=	"Reverse Proxy Rules"
desc_enable_acl	=	"Enable access control"
desc_enable_alias	=	"Enable customized alias"
desc_enable_domain	=	"Enable customized domain"
desc_enable_http	=	"Enable customized port (HTTP)"
desc_enable_https	=	"Enable customized port (HTTPS)"
desc_new_profile	=	"New profile"
desc_policy_web_socket	=	"WebSocket"
desc_port	=	"Port"
desc_proxy_connect_timeout	=	"Proxy connection timeout (sec.)"
desc_proxy_http_version	=	"Proxy HTTP version"
desc_proxy_intercept_errors	=	"Use the error page sent back by target server."
desc_proxy_read_timeout	=	"Proxy read timeout (sec.)"
desc_proxy_send_timeout	=	"Proxy send timeout (sec.)"
desc_proxy_timeout	=	"Set the timeout of target server to prevent target server from occupying system resource."
desc_reverse_proxy	=	"Reverse Proxy"
desc_source_ip_or_cidr	=	"Source IP or CIDR"
description	=	"Description"
destination	=	"Destination"
disable_alias_BJ4	=	"The application aliases are disabled due to system upgrade. To re-enable the aliases, please go to Control Panel > Application Portal > Application for the setup."
empty_header_name_value	=	"Header name and value are required fields."
err_alias_refused	=	"The alias is reserved for system use only. Please enter another alias."
err_alias_used	=	"This alias already exists. Please enter a different alias."
err_backend_duplicated	=	"This destination port is already used. Please specify another port."
err_bad_source_ip_or_cidr	=	"The source IP or CIDR you entered is invalid."
err_fqdn_duplicated	=	"The domain name is already used. Please use another name."
err_frontend_duplicated	=	"This source port is already used. Please specify another port."
err_header_name_duplicated	=	"Header name duplicated"
err_invalid_backend_host	=	"Destination device unreachable. Please enter another hostname and check the DNS settings."
err_invalid_header_name	=	"Invalid header name"
err_invalid_header_value	=	"Invalid value"
err_loading_failed	=	"Failed to apply port/alias rules. Please contact Synology Inc. for support."
err_port_alias_used	=	"The alias and port number(s) are either used or reserved for system use only. Please enter a different alias and port."
err_port_dup	=	"This port number is used by the other protocol. Please enter a different number."
err_port_reserved	=	"This port number is reserved for system use only. Please enter a different number."
err_port_used	=	"This port number is used by another application. Please enter a different number."
err_profile_dup	=	"The profile name is already in use. Please enter a different name."
err_proxy_timeout	=	"Setting value must be between 1-86400 seconds."
hostname	=	"Hostname"
message_check_port_used	=	"Checking if the alias or ports are used."
not_configured	=	"Not configured"
profile_name	=	"Profile Name"
protocol	=	"Protocol"
proxy_header_name	=	"Header Name"
proxy_header_value	=	"Value"
redirect_from	=	"Redirect from"
reverse_proxy	=	"Reverse Proxy"
reverse_proxy_name	=	"Reverse Proxy Name"
source	=	"Source"
tip_access_control	=	"You can go to the <b>Access Control Profile</b> section on the <b>Advanced</b> tab to add more profiles."
tip_fqdn_NetBIOS	=	"If you enter a NetBIOS domain name (e.g. filestation), you can access this application in the same local network via the URL (e.g. http(s)://filestation.local)."
tip_https_disable	=	"HTTPS connection is disabled"
title	=	"Application Portal"
title_access_control	=	"Access Control Profile"
title_application	=	"Application"
title_edit_access_control	=	"Access Control Profile"
title_proxy_advance	=	"Advanced Settings"
title_proxy_customized_headers	=	"Custom Header"
title_proxy_general	=	"General"
title_reverse_proxy	=	"Reverse Proxy"

[app_privilege]
affected_by_group	=	"The permission is determined by user and group permissions. Permission priority: <b>Deny</b> > <b>Allow</b>."
allow_privilege	=	"Allow"
deny_privilege	=	"Deny"
domain_user	=	"Domain User"
effective_permission	=	"Effective Permission"
error_no_such_user_or_group	=	"The specified user or group was not found. Please make sure the entered information is correct and check your network status."
error_wrong_data_format	=	"Unable to perform this operation due to invalid database format. Please restart your NAS and try again."
grant_by_ip	=	"By IP"
grant_default_privilege	=	"Grant this privilege to all users by default"
grant_default_privilege_desc	=	"Allow users, including domain and LDAP users, to access this application unless explicitly denied."
grant_privilege	=	"Grant"
has_no_privilege	=	"Privilege excludes"
has_privilege	=	"Privilege includes"
local_user	=	"Local User"
tip_privilege_preview	=	"Fill out to view user or group permission from the specified IP address."
warning_forbid_default_priv	=	"Once the operation is complete, no users can sign in to the desktop unless specifically granted the permission. Are you sure you want to continue?"
warning_forbid_group_users	=	"All users belong to the "users" group by default, and the operation you are about to perform will make all users belonging to the "users" group unable to sign in to the desktop. Are you sure you want to continue?"
warning_forbid_self_group	=	"You belong to the group {0}. If you change its permission, you will no longer be able to sign in to _OSNAME_ . Are you sure you want to continue?"

[audio_player]
add_file	=	"Add to Audio Player"
add_undo	=	"Undo"
current_time	=	"Current time"
err_error_count_exceed	=	"Failed to open one or more files in the playlist."
err_exceed_maximum_file_num	=	"You can select at most 1024 files for playback."
err_failed_to_play	=	"Unable to play {0}"
err_format_not_support	=	"Playback for this audio format is not supported."
err_list_media_info_timeout	=	"File addition timeout."
err_no_add	=	"The files cannot be added to Audio Player."
err_no_available_file	=	"No files are available."
error_load_player	=	"Failed to initialize Audio Player."
error_no_flash	=	"To stream music, please install Flash Player version 9.0 or newer."
ie_not_support_wav	=	"Internet Explorer does not support playback for this audio format. Please use another browser to play this audio file."
menu_move_backward	=	"Move Down"
menu_move_forward	=	"Move Up"
menu_movedown	=	"Down"
menu_moveup	=	"Up"
menu_play	=	"Play"
next_song	=	"Next song"
number_files_added	=	"{0} files are added."
player_pause	=	"Pause"
player_play	=	"Play"
player_stop	=	"Stop"
player_volume	=	"Sound volume"
playlist	=	"Playlist"
previous_song	=	"Previous song"
repeat_all	=	"Repeat all"
sound_length	=	"Song duration"
title	=	"Audio Player"

[audiostation]
not_enough_space_to_upgrade	=	"Failed to update Audio Station because of insufficient volume capacity. After you free up enough space, please go to {0}Package Center{1} to restart Audio Station. If this issue persists, contact Synology Technical Support for further assistance."
upgrade_fail	=	"Failed to update Audio Station. Please go to {0}Package Center{1} to restart Audio Station. If this issue persists, contact Synology Technical Support for further assistance."

[autoblock]
autoblock_allow_ip	=	"Allowed IP Address"
autoblock_attempts	=	"Login attempts"
autoblock_desc	=	"Enable this option to block IP addresses with too many failed login attempts. For supported services and packages, please refer to _OSNAME_ Help. "
autoblock_desc_router	=	"Enable this option to block IP addresses with too many failed login attempts, including logins via SSH, FTP, WebDAV, Synology mobile apps, File Station, and _OSNAME_."
autoblock_enable	=	"Enable auto block"
autoblock_expire_time	=	"Expiration time"
autoblock_expire_time_cap	=	"Expiration Time"
autoblock_expired_day	=	"Unblock after (days)"
autoblock_expired_desc	=	"When block expiration is enabled, blocked IP addresses will be unblocked after the number of days entered below."
autoblock_expired_enable	=	"Enable block expiration"
autoblock_export_ip_list	=	"Export"
autoblock_ip	=	"Blocked IP Address"
autoblock_notify	=	"Enable email notification"
autoblock_notify_desc	=	"An email notification will be sent when any IP is blocked."
autoblock_notify_err	=	"You have not completed the settings on the “Notifications” page. Please return to “Notifications” and complete it before continuing with the setup on this page."
autoblock_rule_desc	=	"An IP address will be blocked if it reaches the number of failed login attempts within the time period entered below."
autoblock_rules_desc	=	"Create and manage an allow list to add IP addresses that you trust, or a block list to prevent certain IP addresses from signing in."
autoblock_time	=	"Time Blocked"
autoblock_view_list	=	"Block List"
autoblock_view_rules	=	"Allow/Block List"
autoblock_white_list	=	"Allow List"
autoblock_within_mins	=	"Within (minutes)"
check_overwrite	=	"Overwrite existing IP addresses on Block List and Allow List"
create_ip	=	"Add IP address"
create_ip_cap	=	"Add IP Address"
error_download_list_fail	=	"Unable to download the allow / block list. Please try again later."
forever	=	"Forever"
import_ip	=	"Import IP address list"
ip_in_allowlist	=	"{0} is already included in Allow List."
ip_in_blockedlist	=	"{0} is already included in Block List."
ip_is_validated	=	"IP address {0} is validated."
upload_format_failed	=	"The uploaded file format or IP address is incorrect. (Line {0})"

[autopoweroff]
autopoweroff_desc	=	"_DISKSTATION_ will automatically power off after the internal drive has hibernated for the configured time. You can resume system operation via WOL. To enable power off, you must enable drive hibernation and {0} first."
autopoweroff_note	=	"To enable auto poweroff, you must enable HDD hibernation and WOL first."
autopoweroff_service	=	"Enable auto poweroff"
str_autopoweroff_wol	=	"Wake on LAN (WOL)"

[aviary]
app_title	=	"Aviary Editor"
av_bigsize	=	"The filesize exceeds the maximal limit of Aviary Editor."
browser_not_support	=	"Failed to run Aviary. Please use the latest version of Chrome, Firefox, Internet Explorer (9 or above), or Safari."
load_aviary_common_fail	=	"Failed to run Aviary. Please try again later."
no_external_ip	=	"Failed to run Aviary. Please go to Control Panel and set up an external IP address, DDNS hostname, or QuickConnect service for your _DISKSTATION_."
openctxmenu	=	"Edit in Aviary"

[background_task]
background_task	=	"Background Task"
background_task_all	=	"All"
remote_local_file_operation	=	"Running Tasks"
task_processing	=	"Processing"
task_waiting	=	"Waiting"
tasks_still_in_process	=	"Repairing volume(s)"

[backup]
addon_update	=	"Update"
all_shares_in_repo_list	=	"All available shared folders are already in the backup destination list."
all_volumes_in_repo_list	=	"All available volumes are already in the backup destination list."
app_depend_share_restore	=	"Note: When restoring {0}, the following shared folder(s) will also be restored: {1}."
app_desc	=	"Backup and restore you data, including configuration files"
app_err_install	=	"Installation failed. Please go to Package Center to install this application."
app_err_no_version_found	=	"Failed to restore because this device does not support installation of the application."
app_err_no_volume	=	"Cannot find any volume on which to install this application."
app_err_upgrade	=	"Upgrade failed. Please go to Package Center to upgrade this application."
app_install_list	=	"Applications to install"
app_issues	=	"Application issues"
app_name	=	"Hyper Backup"
app_no_volume	=	"A volume with {0} is needed to back up or restore applications."
app_reinstall_list	=	"Applications to reinstall"
app_restore_action_also_install	=	"To restore this application, {0} should also be installed."
app_restore_action_also_reinstall	=	"To restore this application, {0} needs to be reinstalled."
app_restore_action_also_upgrade	=	"To restore this application, {0} needs to be upgraded."
app_restore_list	=	"Applications to restore"
app_select_count	=	"{0} applications selected; {1} applications unselected."
app_upgrade_list	=	"Applications to upgrade"
app_version_invalid	=	"This version of the application does not support application backup and restore."
application	=	"Application"
apply	=	"Apply"
are_you_sure_to_continue	=	"Are you sure you want to continue?"
attention_required	=	"Attention required"
auto_add_white_list_confirm	=	"Owner {0} is not in the allow list of the backup destination {1}, so has no privilege to perform this backup task. Do you want to add {0} into the allow list?"
auto_update_one	=	"Auto-update"
backup_all_shares	=	"All shared folders"
backup_app	=	"Applications to back up"
backup_config_option	=	"Enable configuration backup"
backup_confirm_cancel_task	=	"Are you sure you want to cancel the selected task?"
backup_confirm_delete_task	=	"Are you sure you want to delete the selected task(s)?"
backup_conflict_desc	=	"Note: All selected conflicted shared folders will be overwritten."
backup_data	=	"Backup contents"
backup_data_empty	=	"Please select at least one shared folder or application."
backup_dest_directory	=	"Directory"
backup_dest_directory_not_available	=	"The directory is already used by another task. Please specify a different name and try again."
backup_dest_status	=	"Permission denied"
backup_destination_is_not_exist	=	"The selected destination does not exist."
backup_do_cancel	=	"Canceling... "
backup_explorer	=	"Backup Explorer"
backup_export_conf	=	"Backing up system configurations."
backup_file_restore	=	"Individual files/folders"
backup_finishing	=	"Finishing"
backup_lock_qtip	=	"Click to unlock"
backup_maria_db_volume_crash	=	"Cannot back up MariaDB (MySQL) database because the volume where it is located has crashed."
backup_metadata_bkp	=	"Backing up Metadata"
backup_metadata_info	=	"Enable this option will back up file metadata including its owner, creation time, Windows ACL settings, and other attributes."
backup_metadata_option	=	"Enable metadata backup"
backup_mysql_volume_crash	=	"Cannot back up MySQL database because the volume where it is located has crashed."
backup_replication	=	"Hyper Backup"
backup_restore_source	=	"Source"
backup_rotation_settings	=	"Rotation Settings"
backup_rsync_dest_deny	=	"Failed to access the selected shared folder. Please check your shared folder privileges, or select another folder."
backup_server_name	=	"Server name"
backup_settings	=	"Backup Settings"
backup_shared_folders_perm_denied	=	"You are not authorized to access the shared folders. Please contact the system administrators of the destination server."
backup_standard_restore	=	"Entire task"
backup_surveillance_note	=	"Note: The entire "{0}" shared folder will be backed up when backing up Surveillance Station."
backup_surveillance_warning	=	"The backup source selected includes the “surveillance” shared folder. This shared folder can only be restored when “Surveillance Station” application option is checked."
backup_sync_bkp	=	"Sync backup"
backup_synoea_info	=	"Enable this option to back up the thumbnails of photos. This will require more storage space."
backup_synoea_option	=	"Enable thumbnails backup"
backup_sys_rcvr	=	"Restoring system configurations..."
backup_target_owner_change_hint	=	"Note: The owner of the backup task will be changed. Please confirm the account associated with the corresponding backup task in the backup source _DISKSTATION_ has appropriate privileges for backup."
backup_target_owner_desc	=	"Only the owner has privilege to back up data to this backup task."
backup_type	=	"Backup type"
backup_unlock_qtip	=	"Click to lock"
backup_white_list	=	"Allow List"
bkp_folders	=	"Subfolders to back up"
bkp_storage	=	"Backup Destination"
bkpstatus_app	=	"Backing up applications..."
bkpstatus_sys	=	"Backing up system configurations... "
bkpwizard_app_title	=	"Select and back up the data on your application"
bkpwizard_sche_title	=	"By setting up backup schedules, system will perform backup tasks regularly"
bkpwizard_share_app_title	=	"Select items to back up"
bkpwizard_share_title	=	"Select shared folders and sub-folders as backup source"
bkpwizard_type_title	=	"Select the type of the destination"
blockbkp_desc	=	"Enable this option to back up only the changed part of a file instead of the whole file. Enabling this option saves network bandwidth usage, but may require additional time for system computation."
blockbkp_enable	=	"Enable block-level backup"
blockbkp_title	=	"Block-level backup"
blog	=	"Blog"
blog_str_man_blog_backup_desc	=	"Back up blog posts, comments, labels, and module settings to a backup file."
calculating	=	"Calculating..."
calculating_restoring_size	=	"Calculating the sizes of the restored files..."
certificate_auth	=	"Certificate authentication"
certificate_auth_failed	=	"The server's certificate is unknown or self-signed. The authentication of this certificate will be skipped for encrypted transmission in order to proceed your backup task. Please examine the certificate carefully to make sure the server can be trusted."
certificate_auth_hint	=	"Authentication is always skipped for encrypted transmission to this backup destination due to untrusted certificates. Please click the Re-authenticate button to enable the authentication if a trusted certificate has been acquired."
certificate_auth_status_enable	=	"Enabled"
certificate_auth_status_skip	=	"Skipped"
cfrm_remove_user	=	"Are you sure you want to remove the selected user(s) or group(s)?"
cloud_auth_fail_time_skew	=	"Connection test failed.<br>1. Please check your authentication information.<br>2. Please make sure your the time on your _DISKSTATION_ is synchronized with the NTP server. (Please go to Control Panel > Regional Options > Time to synchronize time with the NTP server.)"
cloud_restore	=	"Public cloud service restoration"
cloud_restore_desc	=	"Restore data from a public cloud service."
cluster_err_acl	=	"Unable to overwrite the existing "{0}" shared folder because it implements the permissions of Windows ACL."
cluster_err_name_case_diff	=	"Unable to overwrite the existing "{0}" shared folder because the case of its folder name is different."
cluster_err_no_volume	=	""{0}" shared folder can only be restored to a cluster volume. Please go to CMS to create a cluster volume first."
cluster_err_not_cluster	=	"Unable to overwrite the existing "{0}" shared folder because it is not on a cluster volume."
cluster_err_other_service	=	"Unable to overwrite the existing "{0}" shared folder because it is in use by other services."
config_tab_title	=	"Configuration Files"
confirm_unlock_version	=	"Unlocked versions may be automatically deleted if backup rotation is enabled. Are you sure you want to unlock this version?"
conflict	=	"Conflict"
copy_to	=	"Copy to"
create_new_repo	=	"Add Backup Destination..."
data	=	"Shared folders"
data_backup	=	"Data Backup"
delete_repo_data_delete_check	=	"I understand that this option will permanently remove all backup data at the destination."
deselect_all_encrypted_share	=	"All the selected encrypted shared folders will be deselected."
diff_size	=	"Consumed Size"
disable_in_backup	=	"Disabled"
disable_in_backup_qtip	=	"The application will be temporarily stopped during backup and will not run until backup ends."
download	=	"Download"
enable	=	"Enable"
enable_backup_rotation	=	"Enable backup rotation"
enable_dedup	=	"Back up data to volume"
enable_encrypted_transmission	=	"Enable transfer encryption"
enable_photo_first_desc	=	"Note: Photo Station and Blog will only be available for backup when the entire "photo" shared folder has been selected."
enable_surveillance_first_desc	=	"Note: Surveillance Station will only be available for backup when the entire "surveillance" shared folder has been selected."
enable_thum	=	"Enable Photo Station thumbnails backup"
encrypt_backup	=	"Network Backup (Encrypted)"
encrypted_transmission_not_support	=	"Encrypted transmission is not supported by the _OSNAME_ version installed on your backup destination. Please upgrade your _OSNAME_ to 5.2 or above if you want to use this feature."
err_backup_checking_task	=	"Checking stored data... Please try again later."
err_connect	=	"Cannot connect to the server."
err_mapped_shared_folder	=	"Cannot restore the corresponding shared folder."
err_mapped_shared_folder_restore	=	"Cannot back up the corresponding shared folder."
err_not_support_acl	=	"Cannot restore this shared folder because this model does not support Windows ACL shared folders."
err_not_valid_fs	=	"This shared folder cannot be restored to an unsupported or unwritable file system."
err_peta_share_rename_different	=	"Conflicting names found. To restore this shared folder, please open PetaSpace and rename this shared folder."
err_peta_share_rename_same	=	"To restore this shared folder, please open PetaSpace and rename this shared folder as {0}."
err_serivce_disable	=	"The server is not enabled."
err_server_name	=	"Failed to connect to the destination server. Please make sure the server name or IP address is correct."
err_share_acl_to_not_acl	=	"To restore this shared folder, please convert this folder to Windows ACL at Control Panel > Shared Folder first."
err_share_not_writable	=	"This shared folder exists on your _DISKSTATION_ but is not writable and therefore cannot be restored."
err_share_source_conflict	=	"This shared folder cannot be restored because a same-name shared folder already exists on your _DISKSTATION_."
err_share_unmounted	=	"To restore this shared folder, please go to Control Panel > Shared Folder to mount this shared folder first."
err_ver_browse_checking_task	=	"Checking stored data... Please try again later."
error_bad_maria_db_pass	=	"Please enter the correct MariaDB (MySQL) password."
error_bad_mysql_pass	=	"Please enter the correct MySQL password."
error_bkp_app	=	"Failed to back up applications."
error_invalid_user_or_group	=	"Please specify a valid user or group."
error_not_owner_backup	=	"Only the owner of this backup task is allowed to perform backup."
error_rm_def	=	"You cannot delete the default user or group."
ext3issue_fullbackup_hint	=	"We've fixed the issue where changed files on ext3 file system may not be backed up. Do you want to make all the related task's next run as full backup to make sure all the files be backed up?"
ext3issue_fullbackup_notify	=	"We've fixed the issue where changed files on ext3 file system may not be backed up in Hyper Backup/Backup & Replication. It's recommended to run the related backup task as full backup after upgrading."
ext3issue_fullbackup_title	=	"System Event"
fb_copy_failed	=	"Failed to copy data."
fb_copy_success	=	"Copied data successfully."
fb_restore_failed	=	"Failed to restore data."
fb_restore_success	=	"Restored data successfully."
file_type	=	"File Type"
filetable_owner	=	"Owner"
folder_title	=	"Folders"
folders	=	"folder(s)"
fullsync_bkp_warn	=	"By allowing backed up files to be deleted, the system will run full backup when users perform backup to ensure the file consistency between source and destination."
general_backup	=	"General backup"
general_backup_desc	=	"Back up data to an external disk or a system shared folder via Local Backup, or to another {0} server or rsync-compatible server via Network Backup."
general_backup_destination_connect_fail	=	"Failed to connect to the destination server. Please make sure: <BR>1. The server name or IP address is correct. <BR>2. Network backup volume destination or network backup service has been enabled on the destination server at Backup & Replication > Backup Services. <BR>3. The network connection on the destination server is active. <BR>4. You have the privilege to access network backup volume destination or network backup service. (You can view your privileges at Control Panel > Privileges)."
general_backup_destination_disconnect	=	"Failed to access the backup destination."
general_backup_destination_no_response	=	"No response from the destination server. Please try again later."
getting_dest_status	=	"Getting status"
hfsplus_readonly_not_support	=	"This shared folder is on a read-only HFS+ device."
image_bkp	=	"Back up multiple versions"
img_client_ver_old	=	"There is a compatibility issue with _OSNAME_ version between the backup source and destination. Please update your backup source to the latest _OSNAME_ version."
img_local	=	"Back up data to local volume"
img_no_volume	=	"To back up to volume, a {0} volume is needed."
img_remote	=	"Back up data to remote volume"
img_repo_only	=	"Single-version backup data will remain in the destination shared folder."
img_server_ver_old	=	"There is a compatibility issue with _OSNAME_ version between the backup source and destination. Please update your backup destination to the latest _OSNAME_ version."
imgbkp_account_not_allowed	=	"The account you specified does not have the privilege to create backup destination. Please specify another user that belongs to the administrators group and try again."
imgbkp_account_pass_fail	=	"Invalid username or password."
imgbkp_connect_fail	=	"Failed to connect to the destination _DISKSTATION_. Please make sure: <BR>1. The server name or IP address is correct. <BR>2. Hyper Backup Vault is installed and enabled on the destination _DISKSTATION_ (DSM 6.0 and above), or the network backup volume destination is enabled at Backup & Replication on the destination _DISKSTATION_ (DSM 5.0-5.2). <BR>3. The network connection on the destination _DISKSTATION_ is active."
imgbkp_no_app_privilege	=	"This user's network backup destination privileges have been disabled on the destination server at Control Panel > Application Privileges > Network Backup Destination."
imgbkp_service_no_run	=	"Network backup volume destination is disabled on the destination server at Backup & Replication > Backup Services."
include_blog	=	"Include Blog"
incrbkp_allow	=	"Allow"
incrbkp_desc	=	"Enable this option to leave a copy of backed up files on the destination even when files are removed from the source."
incrbkp_enable	=	"Reserve the backed up files at the destination"
incrbkp_forbid	=	"Deny"
incrbkp_setting	=	"Reserve the backed up files at the destination"
install	=	"Install"
installing_something	=	"Installing {0} ..."
is_backing_up_restoring	=	"System is currently backing up or restoring. Please try again later."
is_restoring	=	"System is currently restoring. Please try again later."
limit_the_bandwidth	=	"Bandwidth Limitation"
local_backup	=	"Back up data to local shared folder"
local_backup_desc	=	"Supports single-version backup without data deduplication. You can browse to the destination directory using File Station to access your backup data."
local_dest	=	"Local shared folder"
local_no_space	=	"The available drive space on this device is insufficient."
local_restore	=	"Local restoration"
local_restore_data_notfound_msg	=	"No data to restore."
local_restore_desc	=	"Restore data from an external disk or a system shared folder."
local_restore_folder_title	=	"Select a restore method"
local_restore_rcvr_folder	=	"Shared folder"
local_restore_share	=	"Restore data from local shared folder"
lun_backup	=	"LUN Backup"
maria_db	=	"MariaDB (MySQL)"
maria_db_no_enable	=	"MariaDB (MySQL) service is not enabled."
maria_db_volume_crash	=	"Cannot access MariaDB (MySQL) database because the volume where it is located has crashed."
max_version	=	"Max configuration versions"
missing_folder	=	"missing folder(s)"
modified_date	=	"Modified Date"
multi_version_not_support_encrypted_share	=	"Backing up encrypted shared folders is not supported."
multi_version_repo	=	"Affected volume destination"
mysql_backup_desc	=	"Back up all user-created databases."
mysql_db	=	"MySQL database"
mysql_no_enabled	=	"MySQL service is not enabled."
nearest_backup	=	"the nearest backup time"
netbkp_dest2_desc	=	"Back up data to an rsync-compatible server."
netbkp_dest_desc	=	"Back up data to another {0} or rsync-compatible server."
netbkp_s3_desc	=	"Back up data to an Amazon S3 server."
netbkp_s3_select_region	=	"Select region"
network_backup	=	"Back up data to remote shared folder"
network_backup_desc	=	"Supports single-version backup to a remote destination without data deduplication. You can browse to the destination directory using File Station to access your backup data."
network_restore	=	"Network restoration"
network_restore_desc	=	"Restore data from another {0} or rsync-compatible server."
network_restore_desc2	=	"Restore data from a rsync-compatible server."
network_restore_share	=	"Restore data from remote shared folder"
next_bkp_time	=	"Next scheduled backup time"
no_application	=	"No backup supported applications are available."
no_avail_version	=	"There are no versions available to restore."
no_available_target	=	"No directories available."
no_folder	=	"No avaliable folders."
no_image_volume_reason	=	"The possible reasons are:<br>- The account you specified does not have the privilege to create a new backup destination on the volume which has no existing backup destination. Please specify another user that belongs to the administrators group and try again.<br>- The account you specified does not have the privilege to access existing backup destinations. Please sign in to the destination server as admin (or a user belonging to the administrators group), and then edit privileges at Backup & Replication > Backup Destination > Edit > Allow List.<br>- All volumes are already in the backup destination list."
no_permission_edit_target	=	"Backup tasks cannot be edited on the remote _DISKSTATION_. Please sign in to the remote _DISKSTATION_ with a user belonging to the administrators group to edit."
no_restore_volume_reason	=	"The possible reasons are:<br>- The account you specified does not have the privilege to access a volume on the server. Please sign in to the destination server as admin (or a user belonging to the administrators group), and edit privilege at Backup & Replication > Backup Destination > Edit > Allow List.<br>- The account you specified does not have the privilege to restore data from the stored backup data. Please log in the destination server as admin (or a user belonging to the administrators group), and then edit privilege at Backup & Replication > Backup Destination > Expanding Backup Destination > Backup Task > Properties > Allow List.<br>- There is no backup data on any of the volumes."
no_task_desc	=	"No backup task"
not_available	=	"Not available."
not_show_again	=	"Do not show this warning again."
not_support_bkp_app	=	"Application backup is not supported"
not_support_filesystem	=	"Unsupported file system"
not_support_restore_to_encrypted_share	=	"Restoring to encrypted shared folders is not supported."
notify_broken_task	=	"The backup data of task {2} stored in backup destination {0} ({1}) was corrupted. Please contact Synology Technical Support."
notify_copy_canceled	=	"Canceled copying/restoring the file/folder ({0})."
notify_copy_failed	=	"Failed to copy/restore the file/folder ({0})."
notify_copy_success	=	"Copied/restored the file/folder ({0})."
notify_version_empty	=	"Several backup versions stored in the backup task (ID: {2}) of the backup destination {0} ({1}) were not complete. Please check the backup logs for detailed information."
old_sever_not_support	=	"The server _OSNAME_ must be version {0} or onward to support this operation."
open_explorer_menu	=	"Open Backup Explorer"
overview	=	"Overview"
overview_status_no_task	=	"No backup tasks"
overview_status_no_task_desc	=	"To start creating backup tasks, please go to the Backup tab."
overview_status_normal	=	"Normal"
overview_status_normal_desc	=	"Backup tasks are normal."
overview_status_not_start	=	"No backup tasks executed"
overview_status_not_start_desc	=	"To begin backup, please go to the Backup tab."
overview_status_partial_desc	=	"Task completed with minor exceptions. Please refer to the log for details."
overview_status_syncing	=	"Backing up"
overview_status_syncing_desc	=	"A backup task is in process"
overview_task_cancel	=	"Task canceled at {0}"
overview_task_failed	=	"Task failed at {0}"
overview_task_finished	=	"Task completed at {0}"
overview_task_partial	=	"Task completed with minor exceptions at {0}"
overview_task_scheduled	=	"Scheduled at"
overview_task_syncing	=	"Backing up now"
overwrite	=	"Overwrite"
permission_denied	=	"Permission denied."
photo_backup_desc	=	"Back up all photos, titles, descriptions, comments, logs, user accounts, access permissions, and photo settings."
photo_station	=	"Photo Station"
public_cloud_desc	=	"Back up data to a public cloud service."
public_cloud_sched_action	=	"Back up data to a public cloud service"
public_cloud_title	=	"Public Cloud Backup Destination"
reinstall	=	"Reinstall"
reinstalling_something	=	"Reinstalling {0} ..."
remind_confirm	=	"Do not remind me again."
remote_folder	=	"remote folder(s)"
remove_repo_data	=	"Delete backup data at the selected backup destination"
replication	=	"Shared Folder Sync"
repo_already_exist	=	"This has already been selected as a backup destination:"
repo_choose_white_list	=	"Backup Destination Allow List"
repo_create_local_headline	=	"How would you like to back up data?"
repo_create_net_auth_headline	=	"Enter server address and authentication information"
repo_create_network_headline	=	"How would you like to back up data?"
repo_create_privilege_headline	=	"Who can access this backup destination?"
repo_create_s3_headline	=	"Back up data to Amazon S3"
repo_create_title	=	"Create Backup Destination"
repo_create_type_headline	=	"Where would you like to store backup data?"
repo_creator	=	"Owner"
repo_creator_host	=	"Source server name"
repo_delete_hint	=	"The stored backup data of the selected backup destination will not be removed. If you want to remove the all backup data, please change the account of the selected backup destination to a user belonging to the administrators group. If you want to remove partial backup data, please expand the backup destination to delete the specific backup data."
repo_delete_warn	=	"Delete the selected backup destination and related backup tasks"
repo_delete_warn_local	=	"Are you sure you want to delete the selected backup destination, related backup tasks, and backup data?"
repo_exist	=	"The backup destination already exists."
repo_local_no_resouce	=	"No shared folders available as backup destinations. Please make sure local shared folders exist and you have read/write permissons to any of them."
repo_name	=	"Backup destination name"
repo_name_duplicate	=	"This backup destination name is already in use. Please choose a different name."
repo_network_no_resource	=	"There are no volumes or remote shared folders available to create backup destinations."
repo_no_share	=	"No shared folders available."
repo_no_space	=	"Backup destination is out of free space."
repo_not_exist	=	"The backup destination does not exist."
repo_type_aws_s3	=	"Amazon S3"
repo_type_image_local	=	"Local Synology Volume"
repo_type_image_remote	=	"Remote Synology Volume"
repo_type_local	=	"Local Synology Shared Folder"
repo_type_rsync	=	"Remote rsync Server"
repo_type_rsync_ds	=	"Remote Synology Shared Folder"
repo_white_list_desc	=	"Create an allow list and add users and groups to give them privilege to perform backup and restore in this backup destination."
repo_white_list_hint	=	"If you want to edit the backup destination's privilege settings, please sign in to the destination _DISKSTATION_ as a user belonging to the administrators group."
repo_white_list_title	=	"Access Privilege"
restore	=	"Restore"
restore_app	=	"Restoring applications..."
restore_cancel	=	"Cancel"
restore_cancel_confirm	=	"Canceling the restore process may damage the local files you are currently restoring. Are you sure you want to continue?"
restore_config_no	=	"Do not restore system configuration"
restore_config_yes	=	"Restore system configuration"
restore_conflict	=	"Unable to restore the shared folder because it has been either encrypted or decrypted after you performed the backup task."
restore_conflict_skip	=	"and skip conflicted data"
restore_current_task	=	"Restore from an existing task"
restore_data	=	"Select the shared folders to restore"
restore_description	=	"Click the button below to restore shared folder files, LUN or system configuration."
restore_description_us	=	"Click the button below to restore shared folder files or system configurations."
restore_do_cancel	=	"Canceling... "
restore_executing	=	"Restoring shared folders..."
restore_fail	=	"Failed"
restore_from_enc_share	=	"Unable to restore from encrypted shared folders."
restore_from_other	=	"Restore from..."
restore_items	=	"Item"
restore_lun_executing	=	"Restoring LUN..."
restore_maria_db	=	"Restore MariaDB (MySQL) databases"
restore_mysql	=	"Restore MySQL databases"
restore_new_task	=	"Create a restoration task from:"
restore_no_dest	=	"No backup data found on this destination."
restore_overwrite_hint	=	"This restoration action will overwrite your original file(s). Are you sure you want to proceed?"
restore_page_type	=	"Type"
restore_photo_note	=	"Note: Restoring Photo Station or blog will also restore the entire "photo" shared folder."
restore_photostation	=	"Restore Photo Station"
restore_progress	=	"Restoring progress"
restore_result	=	"Result"
restore_share	=	"Shared folders to restore"
restore_source	=	"Source"
restore_status	=	"Status"
restore_stop_app_alert	=	"All the selected applications will be disabled during restoration. Are you sure you want to continue?"
restore_success	=	"Succeeded"
restore_surveillance	=	"Restore Surveillance Station"
restore_surveillance_note	=	"Note: All conflicting Surveillance Station settings will be overwritten, and the entire "{0}" shared folder will be restored."
restore_surveillance_settings	=	"Restore shared folder and system settings of "surveillance""
restore_surveillance_warn	=	"Some surveillance events might be unable to use without restoring surveillance settings."
restore_tab_name	=	"Restore"
restore_the_same_share_err	=	"You cannot restore a shared folder’s encrypted and unencrypted form at the same time."
restore_time	=	"Time"
restore_type	=	"Restore type"
restore_user_config_conflict_warning	=	"User name and group were modified. The ACL of restored files may not work."
restore_welcome	=	"The wizard will help you with the following: <p><ul><li>Select the restoration type.</li><li>Select the restoration contents.</li><li>Restore user, group, and shared folder settings; Photo Station; Surveillance Station; MySQL databases.</li></ul></p>"
restore_wizard_bkpapp_title	=	"Select applications to restore"
restore_wizard_desttype_title	=	"Select restoration type"
restoring	=	"Restoring..."
restoring_something	=	"Restoring {0}..."
resume	=	"Re-authenticate"
reswizard_app_title	=	"Select and restore the application data"
reswizard_share_app_title	=	"Select items to restore"
reswizard_share_title	=	"Select shared folders and sub-folders that you want to restore"
reswizard_src_title	=	"Select the directory where the data is kept"
reswizard_type_title	=	"Select the type of the restore destination"
rotate	=	"Rotate"
rotate_action_description	=	"Apply the following method to rotate backup versions"
rotate_action_earliest	=	"From the earliest versions"
rotate_action_smart_recycle	=	"Smart Recycle"
rotate_action_smart_recycle_daily	=	"Daily versions from the past 1 day to 1 month."
rotate_action_smart_recycle_daily_hint	=	"The system keeps the earliest version created each day."
rotate_action_smart_recycle_description	=	"Smart Recycle is an intelligent backup maintainer. It will retain:"
rotate_action_smart_recycle_hourly	=	"Hourly versions from the past 24 hours."
rotate_action_smart_recycle_hourly_hint	=	"The system keeps the earliest version created each hour."
rotate_action_smart_recycle_weekly	=	"Weekly versions older than 1 month."
rotate_action_smart_recycle_weekly_hint	=	"The system keeps the earliest version created each week."
rotate_condition_description	=	"Rotate backup versions until the following condition has been reached"
rotate_condition_max_version	=	"Number of versions"
rotate_delete_confirm	=	"Are you sure you want to apply this condition to rotate backups?"
rotate_delete_hint	=	"Warning: The current number of your unlocked backup versions is {0} which is above the condition: {1}. _OSNAME_ will delete the exceeded versions. Please confirm your backup policy in advance. You can also lock versions in the Version Information browser to prevent them from being deleted. Please go to _OSNAME_ Help > Backup & Replication > Backup Destination to learn how to do this."
rotate_delete_hint_under	=	"Warning: The current number of your unlocked backup versions is {0}. _OSNAME_ will delete the exceeded versions once the number is above the condition: {1}. Please confirm your backup policy in advance. You can also lock versions in the Version Information browser to prevent them from being deleted. Please go to DSM Help > Backup & Replication > Backup Destination to learn how to do this."
rotate_delete_note	=	"Rotation will be executed right away, but will be postponed to the next time this backup task is run if your backup destination is currently busy."
rotate_enable_confirm	=	"Are you sure you want to enable backup rotation?"
rotate_enable_hint	=	"Warning: Enabling this option will cause your backups to be deleted automatically based on your rotation settings below. Please confirm your backup policy in advance. You can also lock versions in the Version Information browser to prevent them from being deleted."
rotate_retention_description	=	"Below is the possible result of backup retention according to your backup schedule and rotation scheme:"
rotate_retention_no_schedule	=	"There is no repeated backup schedule configured."
rsync_compatible_backup	=	"Back up data to an rsync-compatible server"
rsync_service_share_action_warning	=	"NetBackup is a default shared folder created when rsync is enabled. Please disable rsync first."
s3_access_key	=	"Access Key"
s3_bucket	=	"Bucket"
s3_bucket_number_limit	=	"The number of buckets has reached the limit."
s3_create_bucket	=	"Create a new bucket"
s3_multipart_size	=	"Multipart Upload part size (MB)"
s3_provider	=	"Service Provider"
s3_region_asia_singapore	=	"Asia Pacific (Singapore)"
s3_region_asia_sydney	=	"Asia Pacific (Sydney)"
s3_region_asia_tokyo	=	"Asia Pacific (Tokyo)"
s3_region_china_beijing	=	"China (Beijing)"
s3_region_eu_frankfurt	=	"EU (Frankfurt)"
s3_region_eu_ireland	=	"EU (Ireland)"
s3_region_south_america_sao_paulo	=	"South America (Sao Paulo)"
s3_region_system	=	"AWS Region"
s3_region_system_china	=	"China"
s3_region_system_global	=	"Global"
s3_region_system_global_hint	=	"US, EU, South America, Asia Pacific (excluding China)"
s3_region_us_east_virginia	=	"US East (Standard)"
s3_region_us_west_california	=	"US West (Northern California)"
s3_region_us_west_oregon	=	"US West (Oregon)"
s3_restore	=	"Amazon S3 restoration"
s3_restore_desc	=	"Restore data from Amazon S3 server"
s3_secret_key	=	"Secret Key"
s3_server	=	"S3 Server"
s3_server_region	=	"Server region"
s3_use_rrs	=	"Enable Amazon S3 RRS"
same_file_description	=	"If the file already exists"
schedule_disabled	=	"No schedule"
search_restore_config	=	"Searching for available configuration files..."
search_restore_folder	=	"Searching for available shared folders to restore, please wait..."
select_dest_repo	=	"Existing Backup Destination"
select_or_create_service	=	"Please select or create a service"
select_path	=	"Please choose a destination"
select_share_app_title	=	"Select application data, configurations, and shared folders to back up"
select_source	=	"Select source"
select_source_destination	=	"Select source and destination"
select_task	=	"Select task"
select_version	=	"Version to restore"
service_opt	=	"Backup Services"
share_depend	=	"Shared folder"
share_depend_qtip	=	"The shared folder which requires backup along with the application."
single_version_repo	=	"Affected shared folder destination"
skip	=	"Skip"
source_host_name	=	"Backup Source Hostname"
source_not_remote_folder	=	"Remote folders cannot be selected as the backup source."
source_not_unmount_encrypted_share	=	"Cannot select unmounted encrypted shared folders as the backup source."
source_not_virtual_drive	=	"Virtual drives cannot be selected as the backup source."
source_share_conflict_destination	=	"This shared folder cannot be your backup source because it has been selected as a backup destination."
space_usage	=	"Used Size"
status_partial	=	"Partial"
stop_surveillance_first	=	"Before restoring Surveillance settings, please disable Surveillance service first."
support_auto_unmount_dest	=	"Remove destination external device when backup task has successfully finished."
support_auto_unmount_dest_tip	=	"Enable this option to un-mount backup destination device when the backup task has finished successfully."
surveillance_event_backup_desc	=	"Back up settings of all pages, including Event, Notification, Privilege, Log, License and Options."
surveillance_overwrite	=	"Note: All conflicted Surveillance Station settings will be overwritten."
surveillance_station	=	"Surveillance Station"
syno_bkp	=	"Back up data to shared folder"
target_auto_add_white_list_confirm	=	"This backup task's allow list has been updated.<br>However, the following user(s) or group(s) are not in backup destination {0}'s allow list, so have no privilege to access the stored data of this backup task. Do you want to add these user(s) or group(s) into backup destination {0}'s allow list?"
target_busy	=	"Cannot perform this operation because other operations are in procress."
target_busy_backup	=	"Cannot perform this operation because a backup task is in progress."
target_busy_protect_rollback	=	"Due to some previous erroneous operations, a rollback is required to protect your data. This operation will be performed automatically after the rollback."
target_busy_restore	=	"Cannot perform this operation because a restore task is in progress."
target_busy_rollback	=	"This task is temporarily unavailable. Please try again later."
target_busy_version_delete	=	"Cannot perform this operation because a backup version is being removed."
target_choose_white_list	=	"Allow list of backup task"
target_delete_warn	=	"Deleting backup tasks will remove all the data you have backed up."
target_owner_title	=	"Backup Privilege"
target_process_delete	=	"Cannot perform this operation because stored backup data is being removed."
target_process_repo_delete	=	"Cannot perform this operation because a backup destination is being removed."
target_space_not_available	=	"Not available"
target_white_list_desc	=	"Create and manage an allow list to add users and groups who have privilege to restore data from this stored backup data."
target_white_list_title	=	"Restore privilege"
task_list_title	=	"Stored Backup Tasks"
task_lost_warning	=	"Deleting the selected backup destination will also remove related tasks that back up data to this destination. Your backup data, however, will remain at the destination. Are you sure you want to continue?"
task_name	=	"Backup Task Name"
time_before	=	"{0} {1} earlier"
time_months	=	"months"
timeline_versions	=	"version(s),"
title_err_msg	=	"Error"
transmitted_size	=	"Progress"
unknown_host	=	"Unknown host"
unknown_task_name_hint	=	"Cannot retrieve the name of this backup task because it was not created via this backup destination. "
unknown_task_name_hint_5.1	=	"Cannot retrieve the name of this backup task, because it was not created via this backup destination. The server must be _OSNAME_ 5.1 or onward to support task name retrieval."
unselect_invalid_source	=	"After applying these settings, the following invalid backup source(s) will be unselected."
unselect_share_alert_bkp	=	"Cancelling the backup of the {0} shared folder will also cancel the {1} backup. Are you sure you want to continue?"
unselect_share_alert_restore	=	"Cancelling the restoration of the {0} shared folder will also cancel the {1} restoration. Are you sure you want to continue?"
update_all	=	"Update All"
upgrade	=	"Upgrade"
upgrading_something	=	"Upgrading {0} ..."
user_in_allow_list	=	"{0} is already in the Allow List."
version_backup	=	"Back up data to volume"
version_backup_desc	=	"Supports multi-version backup and data deduplication. However, backup data will not be accessible directly via file services, e.g. SMB, FTP, File Station."
version_deleting	=	"Deleting"
version_info	=	"Backup Version Information"
version_lock_delete_fail	=	"Failed to delete this version because it has been locked."
version_lock_not_support	=	"Version lock is not supported by the _OSNAME_ version installed on your backup destination. Please upgrade your _OSNAME_ to 5.2 or above if you want to use this feature."
version_num	=	"Versions"
version_nums	=	"version(s)"
version_restore	=	"Restore data from volume"
version_status	=	"Status"
version_status_backing_up	=	"Backing up"
version_status_canceled	=	"Canceled"
version_status_failed	=	"Failed"
version_status_partial	=	"Last backup incomplete"
version_status_success	=	"Successful"
version_time	=	"Date Created"
versionbkp_lbl_enable_service	=	"Enable Hyper Backup Vault for remote Synology NASs"
versionbkp_service_desc	=	"This option allows remote Synology servers to use this _DISKSTATION_ as their backup destination."
virtual_drive	=	"virtual drive(s)"
warn_backup_same_volume	=	"To ensure the reliability of backup, it is strongly advised that your backup source and backup destination are on different volumes."
warn_c2_current_not_exist	=	"Hybrid Share folders ({0}) are not mounted on your _DISKSTATION_ and will be restored as normal shared folders. To restore the backed up data to the Hybrid Share folders on your _DISKSTATION_, please mount the Hybrid Share folders with the same names ({0}) first."
warn_c2_to_not_c2	=	"Hybrid Share folders ({0}) will be restored as normal shared folders. Data will not be synced to C2 Storage."
warn_enc_current_not_enc	=	"The encrypted shared folders ({0}) will be restored unencrypted. (To keep the folders encrypted, please create encrypted shared folders as the restore destinations.)"
warn_enc_current_not_exist	=	"The encrypted shared folders ({0}) do not exist on your _DISKSTATION_ and will be restored unencrypted. (To keep the folders encrypted, please create encrypted shared folders as the restore destinations.)"
warn_not_acl_to_acl	=	"The shared folders ({0}) will be restored without Windows ACL settings. For full restoration, please convert the restored folders to Windows ACL at Control Panel > Shared Folder."
warn_not_c2_to_c2	=	"Shared folders ({0}) will be restored as Hybrid Share folders. Data will be synced to C2 Storage."
warn_petashare_current_not_exist	=	"The PetaSpace shared folders ({0}) do not exist on your _DISKSTATION_, and will be restored as normal shared folders. To restore them as PetaSpace folders, please create PetaSpace shared folders as the restore destinations."
warn_petashare_current_not_peta	=	"The PetaSpace shared folders ({0}) will be restored as normal shared folders. To restore them as PetaSpace folders, please create PetaSpace shared folders as the restore destinations."
welcome	=	"The wizard will help you with the following:<p><ul><li>Set up backup task name.</li> <li>Set the backup destination.</li> <li>Select backup contents.</li> <li>Set up a backup schedule.</li></ul><p>"
wizard_bkpapp_title	=	"Select applications to back up"
wizard_bkpfolder_title	=	"Select folders to back up"
wizard_desttype_title	=	"Select destination type"
written_size	=	"Progress"

[bandwidth]
adv_setting_title	=	"Advanced Settings for {0}"
bandwidth_account_name	=	"Name"
bandwidth_brief_desc	=	"Speed Limit Settings"
bandwidth_domain_group_tab_title	=	"Domain Groups"
bandwidth_domain_user_tab_title	=	"Domain User"
bandwidth_down_rate	=	"Download Limit"
bandwidth_download	=	"Download"
bandwidth_enable	=	"Enable speed limit"
bandwidth_filename	=	"Filename"
bandwidth_global_conf_enable_desc	=	"The speed limit of the following protocols is not yet enabled. Would you like to enable it now?"
bandwidth_group	=	"Group"
bandwidth_group_create_description	=	"Assign speed limit to the group. 0 means unlimited (Unit: KB/s)"
bandwidth_group_create_headline	=	"Set group speed limit"
bandwidth_ldap_group_tab_title	=	"LDAP Groups"
bandwidth_ldap_user_tab_title	=	"LDAP Users"
bandwidth_local_group_tab_title	=	"Local Groups"
bandwidth_local_user_tab_title	=	"Local User"
bandwidth_min_rate	=	"Transfer rate must be at least {0} KB/s."
bandwidth_owner_type	=	"Account type"
bandwidth_preview	=	"Result"
bandwidth_progress	=	"Progress"
bandwidth_protocol	=	"Service"
bandwidth_settings	=	"Speed Limit Settings"
bandwidth_status	=	"Speed Limit"
bandwidth_tab_title	=	"Speed Limit"
bandwidth_transfer_speed	=	"Speed"
bandwidth_transfer_speed_limit	=	"Limit"
bandwidth_transfer_type	=	"Transfer type"
bandwidth_up_rate	=	"Upload Limit"
bandwidth_upload	=	"Upload"
bandwidth_user	=	"User"
bandwidth_user_create_description	=	"Assign speed limit to the user. 0 means unlimited (Unit: KB/s)."
bandwidth_user_create_headline	=	"Set user speed limit"
disable_limit	=	"No speed limit"
disable_limit_group	=	"No speed limit"
disable_limit_option	=	"No speed limit"
disable_limit_user	=	"Apply group settings"
edit_adv_setting	=	"Advanced Settings"
enable_limit	=	"Enable speed limit"
group_speed_limit	=	"Group speed limit (Upload / Download)"
limit_customize	=	"Speed limit 2"
limit_customize_setting	=	"Speed limit 2 (Upload / Download)"
limit_default	=	"Speed limit 1"
limit_default_setting	=	"Speed limit 1 (Upload / Download)"
limit_desc_0KB	=	"0 equals unlimited"
limit_download_rate	=	"Max download rate"
limit_upload_rate	=	"Max upload rate"
mode	=	"Speed Limit"
mode_disable	=	"None"
mode_disable_user	=	"Apply group settings"
mode_enable	=	"Set up speed cap"
mode_schedule	=	"Advanced settings"
protocol_desc_file_station	=	"Set speed limits for users and groups who transfer files via File Station."
protocol_desc_ftp	=	"Set speed limits for users and groups who transfer files via FTP."
protocol_desc_rsync	=	"Set up rsync speed limits for users and groups"
protocol_desc_webdav	=	"Set speed limits for users and groups who transfer files via WebDAV."
schedule_limit	=	"Enable speed limit according to a schedule"
schedule_plan	=	"Set Schedule"
schedule_plan_desc	=	"You can set up different speed limits for different time periods. The speed limits will be applied to the user according to the schedule."
schedule_plan_group	=	"Advanced Settings"
schedule_plan_user	=	"Advanced Settings"
speed_unit	=	"KB/s"

[beep]
beep_reason	=	"Reason for current beep:"
beep_title	=	"Beep Control"
enc_module_fail	=	"The expansion unit module malfunctioned or has been removed."
enclosure_fan_fail	=	"Expansion unit fan malfunctions"
eunit_fan_fail	=	"Expansion unit fan malfunctions"
eunit_redundant_power_fail	=	"Expansion unit redundant power supply malfunctions"
fan_fail	=	"Cooling fan malfunctions"
poweroff_beep	=	"System shuts down after pressing power button"
poweron_beep	=	"System powers on"
reason_enclosure_fan_fail	=	"Expansion unit fan malfunctioned"
reason_eunit_fan_fail	=	"Expansion unit fan malfunctioned"
reason_eunit_redundant_power_fail	=	"Expansion unit redundant power supply malfunctioned"
reason_fan_fail	=	"Cooling fan malfunctioned"
reason_power_off	=	"System shut down"
reason_power_on	=	"System powered on"
reason_redundant_power_fail	=	"Redundant power supply malfunctioned"
reason_reset_button	=	"Reset button pressed"
reason_sas_link_fail	=	"Expansion unit connection failed"
reason_ssd_cache_crash	=	"SSD cache is abnormal"
reason_volume_crash	=	"Volume is abnormal"
reason_volume_or_cache_crash	=	"Volume or SSD cache is abnormal"
redundant_power_fail	=	"Redundant power supply malfunctions"
reset_beep	=	"System resets"
sas_link_fail	=	"Expansion unit connection fails"
ssd_cache_crash	=	"SSD cache is abnormal"
volume_crash	=	"Volume is abnormal"
volume_or_cache_crash	=	"Volume or SSD cache is abnormal"

[bkg-mgr]
pause	=	"Paused"
prepare	=	"Preparing"
running	=	"Running"
schedule	=	"Scheduled"
search	=	"Analyzing"
task_manager	=	"Task Manager"

[bkg-task]
empty	=	"No tasks are being processed"
open_detail	=	"Details"
postpone_until	=	"Resume at"
title_hint	=	"Running tasks may temporarily affect system performance."
tray_title	=	"Task Manager"

[bkpwizard]
bkptask_title	=	"Select a backup task"
export_fail	=	"Failed to export system configurations."
finalstep_descr	=	"System configurations are exported to the selected location."
finalstep_title	=	"Backup completed"
localbkp_desc	=	"Back up data to an external disk or a system shared folder."
long_descr	=	"Back up data or system configurations"
msg_waiting	=	"Please wait..."
netbkp_desc	=	"Back up data to another {0} server or rsync-compatible server over the network."
short_descr	=	"Backup"
task_descr	=	"Select a backup task:"
welcome	=	"The wizard will help you back up the {0}."
welcome_title	=	"Welcome to the Backup Wizard"
wizard_title	=	"Backup Wizard"

[bluetooth]
auto_connect_label	=	"Connect to devices automatically (maximum three devices)"
bluetooth_address	=	"Bluetooth address"
bluetooth_connected	=	"Connected"
bluetooth_device_name	=	"Device name"
bluetooth_device_type	=	"Device type"
bluetooth_enable_dongle	=	"Enable Bluetooth"
bluetooth_name	=	"Bluetooth"
bluetooth_paired	=	"Paired"
bluetooth_pin_error	=	"The length of PIN must be 4 characters."
bluetooth_remove_device_confirm	=	"Are you sure you want to remove this device?"
bottom_desc	=	"Make sure new devices are discoverable and within 10 meters of the _DISKSTATION_."
connect	=	"Connect"
connect_device_confirm	=	"One device will be disconnected because you have already connected the maximum number of devices.  Are you sure you want to connect this device?"
desc_manual_pin	=	"Please enter PIN."
device_not_valid	=	"This device is not compatible."
icon_audiocard	=	"Audio Device"
msg_dongle_disabled	=	"This adapter is disabled."
no_device_desc	=	"No devices discovered."
no_dongle_desc	=	"Please insert a Bluetooth adapter."
pair_fail	=	"Failed to connect to the device."
set_settings_err	=	"Set configuration error"
state_connected	=	"Connected"
state_connecting	=	"Connecting"
state_disconnected	=	"Disconnected"
state_disconnecting	=	"Disconnecting"
state_playing	=	"Playing"
state_unpaired	=	"Unpaired"

[btrfs_dedupe]
dedupe_analysis_running	=	"Deduplication Analyzer processing"
dedupe_analyze_complete	=	"The system completed Deduplication Analyzer test run on %VOLUME_NAME%. Estimated space savings: {0}."
dedupe_analyze_config_analizing	=	"Analyzing ({0})"
dedupe_analyze_config_desc	=	"Run an analysis to estimate how much space can be saved potentially from data deduplication. Deduplication Analyzer only provides analysis and makes no actual changes to the volume data structure."
dedupe_analyze_config_desc_note	=	"Deduplication Analyzer is only available for volumes that have not undergone deduplication."
dedupe_analyze_config_estimate	=	"Estimated space savings"
dedupe_analyze_config_result	=	"Analysis Results"
dedupe_analyze_config_title	=	"Deduplication Analyzer - {0}"
dedupe_analyze_suggestion	=	"You can first launch <a class="link-font" href="#" id='{0}'>Deduplication Analyzer</a> to estimate potential space savings."
dedupe_analyze_want_manually	=	"Deduplication Analyzer is running on this volume. To run manual deduplication now, Deduplication Analyzer will be stopped. Are you sure you want to run manual deduplication?"
dedupe_button_analyze	=	"Start Analysis"
dedupe_button_run	=	"Run Now"
dedupe_button_stop	=	"Stop"
dedupe_configure	=	"Configure Data Deduplication - {0}"
dedupe_configure_desc	=	"Data deduplication allows you to store more data in less space by eliminating duplicated blocks of data while ensuring data integrity. Please note that data deduplication can affect the system performance."
dedupe_dry_run_failed	=	"The system failed to perform Deduplication Analyzer test run on %VOLUME_NAME%."
dedupe_dry_run_want_schedule	=	"Deduplication Analyzer is running on this volume. To enable automatic deduplication now, Deduplication Analyzer will be stopped. Are you sure you want to enable automatic deduplication?"
dedupe_failed	=	"%VOLUME_NAME% data deduplication failed."
dedupe_last_ran_on	=	"Last run on {0}"
dedupe_last_run_time	=	"Last run time"
dedupe_last_saving	=	"Last deduplication savings"
dedupe_manually_complete	=	"%VOLUME_NAME% data deduplication complete, saved {0}。"
dedupe_manually_dedupe_running	=	"Manual deduplication processing"
dedupe_manually_section_status_running	=	"Running ({0})"
dedupe_manually_section_title	=	"Manual Deduplication"
dedupe_manually_want_schedule	=	"Manual deduplication is running on this volume. To enable automatic deduplication now, manual deduplication will be stopped. Are you sure you want to enable automatic deduplication?"
dedupe_maybe_later	=	"Maybe Later"
dedupe_process_name	=	"Data Deduplication Process"
dedupe_rate_waiting_to_dedupe	=	"-"
dedupe_run_now	=	"Run Now"
dedupe_schedule_disable	=	"Automatic deduplication is disabled on {0}."
dedupe_schedule_enable	=	"Automatic deduplication is enabled on {0}."
dedupe_schedule_section_checkbox	=	"Enable automatic deduplication"
dedupe_schedule_section_checkbox_desc	=	"You can <a class="link-font" href="#" id='{0}'>schedule data deduplication</a> for off-peak hours to prevent it from affecting performance during important services or tasks."
dedupe_schedule_section_checkbox_time	=	"Enable automatic deduplication (Disabled on {0})"
dedupe_schedule_section_title	=	"Automatic Deduplication (Recommended)"
dedupe_schedule_setting_desc	=	"Running data deduplication consumes system resources. You can set data deduplication to run during off-peak hours, thereby preventing it from affecting system performance during important services or tasks."
dedupe_schedule_setting_invalid_msg	=	"Select at least one cell and set it as an allowed period for the system to run automatic deduplication."
dedupe_schedule_setting_note	=	"This schedule will be applied to all volumes with automatic deduplication enabled."
dedupe_schedule_setting_pause_dedupe	=	"Pause data deduplication"
dedupe_schedule_setting_run_dedupe	=	"Run data deduplication"
dedupe_schedule_setting_title	=	"Schedule Data Deduplication"
dedupe_status_automatic	=	"Automatic"
dedupe_status_manual	=	"Manual"
dedupe_status_ready	=	"Ready"
dedupe_warning_busy	=	"The volume is running other background tasks. Please try again later."
dedupe_warning_config_broken	=	"Unable to run data deduplication because the configuration file is broken. Please contact <a class="link-font" target="_blank" href="https://www.synology.com/company/contact_us">Synology Technical Support</a>."
dedupe_warning_deduping	=	"Manual deduplication or Deduplication Analyzer is running on another volume. Please try again later."
dedupe_warning_detect_snapshot	=	"This volume contains snapshots, which could affect deduplication results. For better storage efficiency, you can go to Snapshot Replication and remove the snapshots that are no longer needed."
dedupe_warning_dry_run_other_volume_deduping	=	"Manual deduplication is running on {0}. Please try again later. To run Deduplication Analyzer on this volume now, stop the operation on {0} first."
dedupe_warning_dry_run_other_volume_dry_running	=	"Deduplication Analyzer is running on {0}. Please try again later. To run Deduplication Analyzer on this volume now, stop the operation on {0} first."
dedupe_warning_manual_other_volume_deduping	=	"Manual deduplication is running on {0}. Please try again later or enable automatic deduplication on this volume instead. To run manual deduplication on this volume now, stop the operation on {0} first."
dedupe_warning_manual_other_volume_dry_running	=	"Deduplication Analyzer is running on {0}. Please try again later or enable automatic deduplication instead. To run manual deduplication on this volume now, stop the operation on {0} first."
dedupe_warning_need_synology_ssd	=	"Data deduplication is only supported on Synology SSDs. Please ensure your storage pool is only composed of Synology SSDs."
dedupe_warning_no_memory	=	"Insufficient system memory to run data deduplication. Please make sure your _DISKSTATION_ has at least {0} of system memory."
dedupe_warning_no_memory_mail	=	"Insufficient system memory to run data deduplication. Please make sure your %DISKSTATION% has at least %MEM_SIZE% %TYPE% of system memory."
dedupe_warning_no_space	=	"Insufficient available volume size. Please expand the volume size."
dedupe_warning_not_healthy	=	"The volume status is abnormal. Please resolve this issue first."
dedupe_warning_quota	=	"After enabling data deduplication, the quota settings (e.g., shared folder and user quotas) on this volume will be disabled. Please enter the password of your DSM account to continue."
dedupe_warning_rescan_quota_v2	=	"For first-time deduplication, the system will scan {0} and recalculate the size of all the shared folders on the volume. This process may take a few minutes."
dedupe_warning_schedule_enable	=	"Unable to run manual deduplication on this volume. Automatic deduplication is already enabled and will run according to the schedule you set."
dedupe_warning_unknown	=	"Unable to run data deduplication because an error has occurred. Please contact <a class="link-font" target="_blank" href="https://www.synology.com/company/contact_us">Synology Technical Support</a>."
dedupe_warning_version	=	"Unable to run data deduplication because the current _OSNAME_ version is incompatible. Please update _OSNAME_."
dedupe_warning_volume_usage_can_not_disable	=	"You cannot disable usage detail analysis while automatic deduplication is enabled."
dedupe_warning_volume_usage_enabling	=	"Usage detail analysis is being enabled for the volume. Try again later."
dedupe_warning_volume_usage_should_enable	=	"Please enable this volume's usage detail analysis option first."
dedupe_wizard_desc	=	"Data deduplication allows you to store more data in less space by eliminating duplicated blocks of data while ensuring data integrity. Enabling this option may affect the system performance."
dedupe_wizard_schedule_desc	=	"If you want data deduplication to run only during specific hours, go to <span class="sm-font-bold">Storage</span> > <span class="sm-font-bold">Global Settings</span> > <span class="sm-font-bold">Data Deduplication Schedule</span> to set a schedule."
dedupe_wizard_summary	=	"Data deduplication"
dedupe_wizard_title	=	"Configure data deduplication"
volume_dedupe_configure	=	"Configure Data Deduplication"
volume_info_dedupe_status	=	"Deduplication status"

[certificate]
add_new_certificate	=	"Add a new certificate"
alias	=	"Subject Alternative Name"
alias_tip	=	"1. Please use semi-colons to separate multiple aliases. For example,<br/> mail.example.com;mail2.example.com<br/> 2. Please use asterisks to apply for a wildcard certificate (available for Synology DDNS only). For example,<br/> *.SYNOLOGY_DDNS_DOMAIN_NAME"
become_expired_crt	=	"Will expire soon"
btn_csr	=	"CSR"
btn_reset	=	"Reset"
certificate	=	"Certificate"
click_download_button	=	"Click "Download" to export your private key and certificate signing request (CSR)."
click_download_button_crt	=	"Please download the successfully signed certificate below."
common_name	=	"Common name"
confirm_del_crt	=	"Are you sure you want to delete this certificate?"
confirm_reset	=	"When you reset to the default Synology certificate, all the other certificates will be deleted from your _DISKSTATION_. Are you sure you want to continue?"
create_by_lets_encrypt	=	"Get a certificate from Let's Encrypt"
create_by_lets_encrypt_desc	=	"Get a free and secure certificate automatically from Let's Encrypt, an open certificate authority."
create_crt	=	"Create certificate"
create_crt_desc	=	"Import a certificate or get a certificate from Let's Encrypt."
create_csr	=	"Create certificate signing request (CSR)"
create_csr_desc	=	"Create a certificate request and apply a certificate from a certificate authority."
create_csr_finish	=	"Create certificate signing request completion"
create_csr_finish_desc	=	"Please keep your private key safe to prevent compromising the security of the _DISKSTATION_. The private key will not be saved in the _DISKSTATION_ until it's imported along with your server certificate."
create_desc	=	"Create, renew, import or sign certificates for use with this server or others."
create_root_crt	=	"Create root certificate"
create_self_signed_crt	=	"Create self-signed certificate"
create_self_signed_crt_desc	=	"Create a self-signed certificate usually used to secure channels between the server and a group of known users."
creating_crt	=	"Creating certificate..."
creating_csr	=	"Creating certificate request..."
csr	=	"Certificate Request"
def_crt	=	"Default certificate"
department	=	"Department"
description	=	"Description"
download	=	"Download"
empty_text_alias	=	"mail.example.com"
empty_text_city	=	"Chicago"
empty_text_common_name	=	"example.com"
empty_text_common_name_ca	=	"Your Company CA"
empty_text_department	=	"Marketing"
empty_text_email	=	"admin@example.com"
empty_text_organization	=	"Your Company"
empty_text_state	=	"Illinois"
err_challenge_unauthorized	=	"Please check if your IP address, reverse proxy rules, and firewall settings are correctly configured and try again."
err_connection	=	"Let's Encrypt is unable to validate this domain name. Please make sure your _DISKSTATION_ and router have port 80 open to Let's Encrypt domain validation from the Internet. All the other communications with Let's Encrypt go over HTTPS to keep your _DISKSTATION_ secure."
err_free_limit_exceeded	=	"Free certificate quota exceeded"
err_illigal_access_token	=	"Invalid access token"
err_insecure_certificate	=	"Invalid certificate. Import a key signed with a more secure algorithm."
err_invalid_domain	=	"Invalid domain. Please make sure this domain can be resolved into a public IP address."
err_le_server_busy	=	"The certificate server is busy. Please try again later."
err_mail	=	"Invalid email address."
err_no_realname_verified	=	"Invalid real-name certification"
err_not_synoddns	=	"Only domains of Synology DDNS support wildcard certificates issued by Let's Encrypt."
err_server_not_match	=	"The certificate issuer is unable to validate this domain name. Please make sure the domain name is valid."
err_too_many_reg	=	"Maximal registered email accounts reached for this IP address."
err_too_many_req	=	"Maximal certificate requests reached for this domain name."
expire_date	=	"Expiration date"
expired	=	"Expired (<a class="link-font" target="_blank" href="https://sy.to/scertificateexpired">Learn more</a>)"
expired_crt	=	"Certificate expired"
export_and_import_desc	=	"You can export the server certificate and private key of your _DISKSTATION_."
export_crt	=	"Export certificate"
fast_recreate_crt	=	"Upgrade certificate"
finger_print	=	"Certificate Fingerprint"
finger_print_algo	=	"Certificate Fingerprint Algorithm"
general_crt	=	"Third-party certificate"
goto_certificate	=	"You can import certificates on the {0} page."
import_cert_format_tips	=	"Certificates must be in X.509 PEM or DER format."
import_crt	=	"Import certificate"
import_crt_desc	=	"Import a private key, certificate, and intermediate certificate."
import_crt_headline	=	"Import Certificate Files"
import_key_format_tips	=	"Private keys support both ECC and RSA formats, but neither format can be passphrase protected."
input_crt_info	=	"Please fill in relevant information for the certificate."
input_csr_info	=	"Please fill in relevant information for the certificate signing request."
inter_and_crt_verify_error	=	"Failed to verify the server and intermediate certificates. Please try again."
inter_crt	=	"Intermediate certificate"
invalid_value	=	"Please enter English characters, including letters, numbers, spaces, or the following symbols: - . ( ) _ "
issue_to	=	"Issued to"
issuer	=	"Issued by"
key_length	=	"Private key length"
lets_encrypt_china_stable_hint	=	"Registering for a Let's Encrypt certificate requires a stable network connection. If your network connection is unstable, registration may not be successful. In that case, try again later."
lets_encrypt_headline	=	"Get a Certificate from Let's Encrypt"
no_csr_selected	=	"Please select your certificate signing request"
not_support_dsa	=	"_OSNAME_ does not support DSA certificates."
notify_change_certificate	=	"After the change, the corresponding services will briefly pause and then restart. Are you sure you want to proceed?"
organizaton	=	"Organization"
region	=	"Region"
renew_crt	=	"Renew certificate"
renew_crt_desc	=	"Create a new private key and certificate signing request to renew your certificate."
renew_csr_desc	=	"The system will create a CSR (Certificate Signing Request) to help you renew this certificate. Please send this certificate signing request to a third-party certificate authority to acquire a certificate that can be imported using your private key."
renew_letsencrypt_desc	=	"Ready to renew Let's Encrypt certificate."
renew_letsencrypt_requirement	=	"The system will start renewing this certificate automatically. Please make sure that the network environment has been set up properly.<br>- _OSNAME_ can be accessed from WAN via port 80.<br>- DNS has been properly set up."
replace_certificate	=	"Replace an existing certificate"
replace_crt_desc	=	"Import a certificate or get a certificate from Let's Encrypt to replace the current one."
reset_cert_desc	=	"You can reset to the default Synology certificate. When you do so, all the other certificates will be deleted from your _DISKSTATION_."
root_crt	=	"Root certificate"
select_action	=	"Please choose an action"
self_signed_crt	=	"Self-signed certificate"
server_and_ca_same	=	"Root certificate and server certificate information should not be identical. Please make sure the information you entered is correct."
server_crt	=	"Server certificate"
set_as_default_certificate	=	"Set as default certificate"
sign_csr	=	"Sign certificate signing request (CSR)"
sign_csr_desc	=	"Use the system's root certificate to sign a certificate signing request (CSR)"
sign_csr_finish	=	"Certificate Signing Complete"
sign_csr_finish_desc	=	"Please keep your certificate. The certificate will not be saved in the _DISKSTATION_."
signature_algorithm	=	"Signature algorithm"
signing_csr	=	"Signing certificate request..."
state_or_provine	=	"State/Province"
title_csr	=	"Certificate Signing Request (CSR)"
title_reset	=	"Reset Certificate"
upload_csr	=	"Please upload the certificate signing request"
used_by	=	"For"
validity_period	=	"Validity Period (days)"
view_certificate	=	"View certificate"
view_crt	=	"View certificate"
warn_acc_limit	=	"<font class="note-font">Note:</font> According to Let's Encrypt policies, the number of email addresses for certificate registration and the number of certificate requests for a domain are both limited."
warn_cert_limit	=	"<font class="note-font">Note:</font> The number of certificate of a domain is limited. Please use Subject Alternative Name to request certificates."
warning_sha1_crt	=	"Most browsers will stop accepting SHA-1-based SSL certificates by 2017."

[chat]
feasibility_delete_share	=	"Synology Chat requires this folder. You must uninstall the package before deleting this folder."
feasibility_move_share	=	"Synology Chat requires this folder. You must disable the package before moving this folder."
feasibility_rename_share	=	"Synology Chat requires this folder. You must uninstall the package before renaming this folder."

[cloudbkp]
my_ds_account	=	"Synology Account"

[cms]
cache_client_service	=	"CMS Cache Client Service"
centrailized_notification_rule_note	=	"You can go to {0}Rules{1} to specify which notifications to forward to the CMS Host."
client	=	"Client"
cms_client	=	"Central Management System Client"
cms_no_volumes	=	"There is no volume in the managed server. Please sign in to the managed server and create a volume."
computing_not_allow_disable	=	"This computing server is using shared folder(s) [{0}], so the computing server cannot be disjoined."
confirm_disable_service_computing	=	"The computing server is using service-related shared folders. Do you want to remove the computing server?"
connect_failed	=	"Disconnected"
description	=	"Description"
disjoint_desc	=	"Click the button below to disjoin this server from the CMS Host."
disjointed	=	"This server is not joined to a CMS Host."
fan_mode_not_supported	=	"Fan mode not supported on server model"
gpo_apply_dsm_upgrade_error_info_HA	=	"_OSNAME_ cannot be upgraded while a high-availability cluster exists."
gpo_apply_dsm_upgrade_error_info_gluster	=	"_OSNAME_ cannot be upgraded while the server is designated as a computing or storage server."
gpo_apply_fail	=	"Failed to apply policy."
gpo_apply_success	=	"Successfully applied policy."
gpo_client_service	=	"CMS GPO Client Service"
joined	=	"CMS Host"
leave_cms	=	"Disjoin"
relaunch_app	=	"The selected server is unavailable. Please check the server is online and its network connection is normal."
remove_fail_msg	=	"Failed to disjoin server [{0}] from the CMS Host. Please go to [{0}] > Control Panel > Applications > CMS to disjoin the server."
set_package_install	=	"Package Installer"
set_package_uninstall	=	"Package Uninstaller"
share_delete_feasibility_check_policy	=	"Central Management System is currently using this shared folder. Before proceeding, go to Central Management System > Policy and modify the policy containing the "Package Installer" rule. Change the target of this policy to "No target.""
share_delete_feasibility_check_upgrading	=	"Central Management System is currently using this shared folder. Wait for the CMS Host to complete updating the managed servers first."
share_move_feasibility_check_policy	=	"Central Management System is currently using this shared folder. Before proceeding, go to Central Management System > Policy and modify the policy containing the "Package Installer" rule. Change the target of this policy to "No target.""
share_move_feasibility_check_upgrading	=	"Central Management System is currently using this shared folder. Wait for the CMS Host to complete updating the managed servers first."
share_offline_feasibility_check_policy	=	"Central Management System: The package's "Package Installer" rule is using a shared folder on this volume. To proceed, go to Central Management System > Policy and modify the policy containing this rule. Change the target of this policy to "No target.""
share_offline_feasibility_check_upgrading	=	"Central Management System: The package is using a shared folder on this volume to update the managed servers. Please wait."
share_rename_feasibility_check_policy	=	"Central Management System is currently using this shared folder. Before proceeding, go to Central Management System > Policy and modify the policy containing the "Package Installer" rule. Change the target of this policy to "No target.""
share_rename_feasibility_check_upgrading	=	"Central Management System is currently using this shared folder. Wait for the CMS Host to complete updating the managed servers first."
share_transform_feasibility_check_policy	=	"Central Management System is currently using this shared folder. Before proceeding, go to Central Management System > Policy and modify the policy containing the "Package Installer" rule. Change the target of this policy to "No target.""
share_transform_feasibility_check_upgrading	=	"Central Management System is currently using this shared folder. To convert this folder, please wait for the CMS Host to complete updating the managed servers first."
share_umount_feasibility_check_policy	=	"Central Management System is currently using this shared folder. Before proceeding, go to Central Management System > Policy and modify the policy containing the "Package Installer" rule. Change the target of this policy to "No target.""
share_umount_feasibility_check_upgrading	=	"Central Management System is currently using this shared folder. Wait for the CMS Host to complete updating the managed servers first."
status_connected	=	"Connected"
title_delegate_name	=	"Name"
title_delegate_type	=	"Type"
title_tab_delegate	=	"Administrators"

[codepage]
codepage_1251	=	"Cyrillic (Code Page 1251)"
codepage_1252	=	"Western European (Code Page 1252)"
codepage_1253	=	"Greek (Code Page 1253)"
codepage_1254	=	"Türkçe (Code Page 1254)"
codepage_437	=	"U.S. English (Code Page 437)"
codepage_737	=	"Greek (Code Page 737)"
codepage_8	=	"Unicode (UTF-8)"
codepage_850	=	"MS-DOS Latin 1 (Code Page 850)"
codepage_852	=	"MS-DOS Latin 2 (Code Page 852)"
codepage_861	=	"Icelandic (Code Page 861)"
codepage_866	=	"Cyrillic (Code Page 866)"
codepage_869	=	"Greek (Code Page 869)"
codepage_932	=	"Japanese SJIS (Code Page 932)"
codepage_936	=	"Simplified Chinese (Code Page 936)"
codepage_949	=	"Korean Hangul (Code Page 949)"
codepage_950	=	"Traditional Chinese (Code Page 950)"

[common]
action	=	"Action"
active_windows	=	"Active applications"
add	=	"Add"
add_field	=	"Add"
add_new_field	=	"Add Field"
add_to_desktop	=	"Add to desktop"
admin_group_user	=	"Administrator group users"
adv_setting	=	"Advanced Settings"
advanced	=	"Advanced"
agree	=	"Agree"
alt_apply	=	"OK"
alt_back	=	"Back"
alt_cancel	=	"Cancel"
alt_close	=	"Close"
alt_edit	=	"Edit"
alt_exit	=	"Exit"
alt_finish	=	"Finish"
alt_help	=	"Help"
alt_ignore	=	"Ignore"
alt_next	=	"Next"
alt_refresh	=	"Refresh this page"
alt_reset	=	"Reset"
alt_restart	=	"Restart"
alt_start	=	"Start"
android	=	"Android"
apply	=	"OK"
apply_default_umask	=	"Apply default UNIX permissions"
applying	=	"Applying..."
applying_settings	=	"Configuring"
ask_cont	=	"Are you sure you want to continue?"
auto	=	"Auto"
back	=	"Back"
back_to_prev	=	"Back"
bad_number	=	"Number cannot start with 0"
buildin_mail	=	"the Default Email"
cancel	=	"Cancel"
cfrm_continue	=	"Do you want to continue?"
charset	=	"utf-8"
chassis	=	"Chassis"
choose	=	"Select"
choose_ctrl_remind	=	"Press and hold the "Shift" or "Ctrl" key for multiple selection."
city	=	"City"
clean	=	"Clear"
clear_input	=	"Clear input data"
click_to_enable_notification	=	"Click {0} to set up browser notifications."
close	=	"Close"
cluster_serial	=	"Cluster serial number"
colon	=	": "
colon_str	=	"colon"
comma	=	", "
comma_str	=	"Comma"
command_line	=	"User-defined script"
command_line_wrap	=	"User-defined script"
commfail	=	"Connection failed. Please check your network settings."
commit	=	"Apply"
common_cancel	=	"Cancel"
common_filename	=	"Name"
common_filesize	=	"Size"
common_settings	=	"Settings"
common_submit	=	"OK"
common_unselect_file	=	"The number of uploading files exceeds the maximum. The last file is not selected."
common_unselect_files	=	"The number of uploading files exceed the maximum. The last _NFILES_ files are not selected."
completed	=	"Completed"
configure	=	"Configure"
confirm_lostchange	=	"Changes are not saved. Are you sure you want to leave?"
confirm_lostchange_without_save	=	"Changes are not saved. Do you want to save and leave?"
confirm_refresh	=	"Changes are not saved. Are you sure you want to refresh?"
congratulations	=	"Congratulations!"
connection_method	=	"Connection Type"
contact_support	=	"Unable to perform this operation, possibly because the network connection is unstable or the system is busy. Please try again later."
continue	=	"Continue"
copied	=	"Copied!"
copy	=	"Clone"
country	=	"Location"
create	=	"Create"
custom	=	"Custom"
customization	=	"Customization"
customize	=	"Customize"
data_center	=	"Data Center"
default	=	"Default"
delete	=	"Delete"
delimiter	=	"Delimiter"
desktop	=	"Desktop"
desktop_edition	=	"Desktop Edition"
details	=	"Details"
disable	=	"Disable"
disabled	=	"Disabled"
disagree	=	"Disagree"
discard	=	"Cancel"
disconnect	=	"Disconnect"
diskstation	=	"_DISKSTATION_"
display	=	"Display"
dnsfail	=	"Connection failed. Please check your DNS settings."
done	=	"Done"
dont_alert_again	=	"Don't show this again"
dont_save	=	"Don't Save"
down	=	"Down"
ds_model	=	"Model name"
ds_serial	=	"Serial number"
dsm_login	=	"Sign In"
dsm_site_description	=	"_DISKSTATION_ provides a full-featured network attached storage (NAS) solution to help you manage, backup and share data among Windows, Mac and Linux easily."
dsm_site_keywords	=	"Multitasking,Web Application,Personal Cloud"
ecc_certificate	=	"ECC"
email	=	"Email"
enable	=	"Enable"
enable_fail	=	"Activation failed"
enabled	=	"Enabled"
enc_serial	=	"Serial number"
enter	=	"Enter"
enter_password_to_continue	=	"Enter Password"
enter_user_password	=	"Please enter the password of your _OSNAME_ account to continue."
err_browser_reserved_ports	=	"This port number is reserved for browsers. Please enter a different number."
err_creating_volume	=	"Processing volume settings. Please try again later when it's finished."
err_noscript_desc	=	"Please allow your browser to run JavaScript."
err_noscript_title	=	"This page can't be displayed"
err_pass	=	"The password is invalid."
error_apply_occupied	=	"Another user with administrative privilege is configuring the setting of this page. Please try again later."
error_baddns	=	"The value of the DNS server is invalid."
error_baddomainname	=	"The domain name is invalid."
error_bademail	=	"Invalid email format."
error_badgate	=	"The value of the default gateway is invalid."
error_badhost	=	"The server name you entered is invalid, please refer to Help for more information."
error_badhostname	=	"Invalid hostname format."
error_badip	=	"The IP address you entered is invalid."
error_badipv6prefixLeng	=	"The IPv6 prefix length you entered is invalid."
error_badmask	=	"The subnet mask you entered is invalid."
error_badport	=	"The port number should be from 1 to 65535."
error_badserver	=	"Failed to apply the network time server setting, the possible reasons are:<br>Cannot find the network time server. Please check if you have assigned a correct DNS server and default gateway, or try to enter the IP instead of a network time server name.<br>The network time server does not exist or is temporarily unavailable.<br>The server you have entered is not a NTP (network time protocol) server.<br>The network connection to the network time server is unstable or in low quality.<br>Please try again after checking the possible reasons above."
error_badv6ip	=	"The IPv6 address you entered is invalid."
error_demo	=	"This function is not available in the demo mode."
error_emptyhost	=	"You have not entered the server name."
error_emptyip	=	"You have not entered the IP address."
error_emptymask	=	"You have not entered the subnet mask."
error_invalid_serial	=	"The serial number of your _DISKSTATION_ is either incorrect or empty."
error_lock	=	"The system is updating security information. Please try again later."
error_max_lun_reach	=	"The operation failed. The number of LUNs has reached the system limit. Please delete LUNs, virtual machines, or images that are not in use."
error_no_enough_space	=	"Operation failed because the available volume size is insufficient."
error_nogate	=	"You have not entered the default gateway yet. Are you sure you want to apply these settings?"
error_noiporhostname	=	"Invalid IP or hostname."
error_notmatch	=	"The IP address and the default gateway belong to two different subnets."
error_occupied	=	"Another administrator is configuring in this page. Please try again later."
error_saving	=	"Failed to save setting"
error_system	=	"The operation failed. Please sign in to _OSNAME_ again and retry."
exit	=	"Exit"
explore	=	"Explore"
file	=	"File"
file_name	=	"File name"
file_path	=	"File path"
filter_label_text	=	"Filter"
finish	=	"Finish"
first_page	=	"First Page"
folder	=	"Folder"
form_optional	=	"Optional"
forminvalid	=	"Some of your settings are invalid. Please enter them again."
frequently_used	=	"Frequently Used"
general	=	"General"
greater_str	=	"greater than"
help	=	"Help"
here	=	"here"
hide	=	"Hide"
home	=	"Home"
hsts	=	"HSTS"
http	=	"HTTP"
http2	=	"HTTP/2"
https	=	"HTTPS"
include	=	"include"
info	=	"Info"
insert_edit_link	=	"Insert/edit link"
ios	=	"iOS"
ip_addr	=	"IP address"
ipv4_addr	=	"IPv4 address"
items_perpage	=	"Items per page"
lang_dsm	=	"System default"
language_ara	=	"العربية"
language_chs	=	"简体中文"
language_cht	=	"繁體中文"
language_csy	=	"Český"
language_dan	=	"Dansk"
language_def	=	"Browser default"
language_enu	=	"English"
language_fre	=	"Français"
language_ger	=	"Deutsch"
language_gre	=	"Ελληνικά"
language_heb	=	"עברית"
language_hun	=	"Magyar"
language_ita	=	"Italiano"
language_jpn	=	"日本語"
language_krn	=	"한국어"
language_nld	=	"Nederlands"
language_nor	=	"Norsk"
language_plk	=	"Polski"
language_ptb	=	"Português do Brasil"
language_ptg	=	"Português Europeu"
language_rus	=	"Русский"
language_spn	=	"Español"
language_sve	=	"Svenska"
language_tha	=	"ไทย"
language_trk	=	"Türkçe"
last_month	=	"last month"
last_page	=	"Last Page"
launch	=	"Launch {0}"
learn_more	=	"Learn more"
leave	=	"Leave"
load_task	=	"Load task"
loading	=	"Loading..."
loading_text	=	"Searching..."
loading_webmanager	=	"Loading..."
loadres_fail	=	"Failed to load the required resources."
loadsetting_fail	=	"Failed to load system settings."
location	=	"Location"
login	=	"Sign In"
logout	=	"Sign Out"
logout_confirm	=	"Are you sure you want to sign out?"
mail	=	"Mail"
main_page	=	"List"
manage	=	"Manage"
manual	=	"Manual"
max	=	"Max"
minus_str	=	"minus"
mobile_edition	=	"Mobile Edition"
mobile_service_empty	=	"The mobile edition of Photo Station and Web Station is available only if their web-based services are enabled in _OSNAME_."
more	=	"More"
more_products	=	"More products"
more_sn_detail_on_sha	=	"Go to Synology High Availability > Host to see the serial number of each of the host servers in the cluster."
msg_waiting	=	"Processing. Please wait..."
name	=	"Name"
next	=	"Next"
next_month	=	"next month"
nextpage	=	"next"
no	=	"No"
no_item	=	"No items"
no_pw	=	"Your password is blank."
no_thanks	=	"No thanks!"
none	=	"None"
not_choose	=	"Not selected yet"
not_now	=	"Not Now"
not_support	=	"Not Supported"
note	=	"Note"
occupied	=	"Occupied"
offline_controller_i	=	"Offline - Controller {0}"
ok	=	"  OK  "
operations_error	=	"Failed to connect to the {0} server. Please check the server address and your network settings."
opsearch_hint	=	"Operators, including AND, OR, NOT, and (), are applicable for advanced search."
optional	=	"(optional)"
osname	=	"_OSNAME_"
owner	=	"User"
password	=	"Password"
password_must	=	"Password requirements"
password_strength	=	"Strength"
pause	=	"Pause"
period	=	"."
photo_station	=	"Photo Station"
plus_str	=	"plus"
port	=	"Port"
pref_time_format_12	=	"12-hour time"
pref_time_format_24	=	"24-hour time"
prevpage	=	"previous"
prevstep	=	"Back"
privacy_statements	=	"Privacy Statement"
proc_askwait	=	"It is not proper to execute the specified command now. Please try again later."
proc_conflict	=	"The specified command is prohibited now. Please try again later."
proc_lock	=	"The server will not perform your request currently because the system resource is being used. Please try again later."
proceed	=	"Submit"
progress	=	"Progress"
properties	=	"Properties"
pure_colon	=	":"
readonly	=	"Read only"
recommend	=	"Recommended"
recommendations	=	"Recommendations"
refresh	=	"Refresh"
refreshing_applied	=	"Refreshing completed."
reload_res	=	"Reload"
remove	=	"Remove"
remove_banner	=	"Hide banner"
remove_banner_desc	=	"Hide banner when opening applications in separate tabs or windows."
remove_cfrmrmv	=	"Are you sure you want to delete the selected item(s)?"
reservedname	=	"This name is reserved for system use only, please enter a different name."
reset	=	"Reset"
restart	=	"Restart"
resume	=	"Resume"
retry	=	"Retry"
return	=	"Create Now"
run	=	"Run"
save	=	"Save"
saving	=	"Saving..."
schedule	=	"Schedule"
search_now_placeholder	=	"Search now"
search_results	=	"Search Results"
searching	=	"Searching..."
selected	=	"Selected"
selection_hint	=	"Please select"
semicolon_str	=	"Semicolon"
send	=	"Send"
server_maintain	=	"This service is under maintenance. Please try again later."
setting_applied	=	"Changes applied."
share	=	"Share file links"
show	=	"Show"
show_all	=	"Show All"
sign_in	=	"Sign In"
size	=	"Size"
size_byte	=	"Bytes"
size_gb	=	"GB"
size_kb	=	"KB"
size_mb	=	"MB"
size_tb	=	"TB"
skip	=	"Skip"
skip_anyway	=	"Skip Anyway"
smaller_str	=	"less than"
sort	=	"Sort"
star	=	"*"
start	=	"Start"
start_service	=	"Start service"
status	=	"Status"
status_abnormal	=	"Abnormal"
status_unknown	=	"No playback time information"
stay	=	"Stay"
step	=	"Step"
stop	=	"Stop"
stop_service	=	"Stop service"
submit	=	"Submit"
subscription_title	=	"Manage Subscription"
support	=	"Compatibility"
syno_tech_support	=	"Synology Technical Support"
synology	=	"Synology Inc."
synology_account_settings	=	"Manage Account"
sys_default_setting	=	"System setting"
tab_str	=	"Tab"
task_cancel_confirm	=	"Are you sure you want to cancel this ongoing task?"
tcp	=	"TCP"
terms_of_service	=	"Terms of Service"
tilt_str	=	"to"
time_day	=	"day"
time_days	=	"days"
time_greater_day	=	"more than 1 day"
time_hour	=	"hour"
time_hours	=	"hours"
time_info	=	"Time information"
time_less_min	=	"less than 1 minute"
time_minute	=	"minute"
time_minutes	=	"minutes"
time_month	=	"month"
time_months	=	"months"
time_second	=	"second"
time_seconds	=	"seconds"
time_week	=	"week"
time_weeks	=	"weeks"
time_year	=	"year"
time_years	=	"years"
unix	=	"UNIX"
unread	=	"{@} unread"
up	=	"Up"
user	=	"User"
user_app	=	"Applications"
user_setting	=	"Personal"
username	=	"Username"
verified	=	"Verified"
version_not_support	=	"Operation incompatible with this version."
volume_share	=	"Volume/Shared Folder"
warn_abort	=	"The action was aborted."
warning_option_affects_security	=	"Enabling this option might allow unwanted users to access shared folders that are the targets of symbolic links. Do you want to continue?"
weather_info	=	"Weather"
web_desktop	=	"System default"
web_station	=	"Web Station"
webman_home	=	"Home"
webman_options	=	"Options"
webman_start	=	"Start"
welcome	=	"Welcome"
welcome_tods	=	"Welcome to {0}"
windows_phone	=	"Windows Phone"
writeable	=	"Writeable"
yes	=	"Yes"

[compress]
compress_error_long_name	=	"The archive name including the extension should be within 242 characters."

[confbackup]
apply_before_backup	=	"Please click <b>Apply</b> to save your settings before backing up."
auto_enc	=	"Auto encryption"
autoconfbkp_desc	=	"Back up your DSM configurations to Synology Account automatically and periodically."
autoconfbkp_restore_desc	=	"System configurations backup files found in your Synology Account. Would you like to restore the system configurations now?<br>You may also restore the system configurations later by going to <b>Control Panel</b> > <b>Update & Restore</b> > <b>Configuration Backup</b>."
autoconfbkp_restore_desc_short	=	"System configurations backup files found in your Synology Account. Would you like to restore now?"
autoconfbkp_restore_later_desc	=	"You may restore later by going to <b>Control Panel</b> > <b>Update & Restore</b> > <b>Configuration Backup</b>."
autoconfbkp_restore_title	=	"DSM Settings Recovery"
autoconfbkp_title	=	"Automatic Backup"
automatically_download_privatekey	=	"DSM will automatically download an encryption key for restoring the system. Please make sure you save and store it securely."
backup_fail	=	"Failed"
backup_is_processing	=	"Backup is being processed."
backup_last_at	=	"Last backed up on"
backup_now	=	"Back up Now"
backup_processing	=	"Processing"
backup_status	=	"Backup status"
backup_success	=	"Success"
bkp_desc1	=	"Back up the user, group, and shared folder settings to a .dss file."
bkp_desc2	=	"Select a backup file"
bkp_done	=	"System configurations are restored."
bkp_export	=	"Back up system configurations and save the configuration file (.dss) onto your computer:"
bkp_export_prepare	=	"Reading system configurations..."
bkp_export_router	=	"Back up _DISKSTATION_ configurations and save the configuration file (.dss) onto your computer:"
bkp_import	=	"Restore some or all system configurations from the configuration file"
bkp_import_progress	=	"Restoring system configurations..."
bkp_import_restore_router	=	"Restore the backed-up configuration or restore _DISKSTATION_ to the factory default settings:"
bkp_is_processing	=	"System is now backing up or restoring system configurations. Please try again later."
bkp_overwrite	=	"Overwrite conflicting settings"
bkp_title	=	"Options"
choose_enc_type	=	"Choose your encryption type"
choose_restore_version	=	"Choose the version from your Synology Account based on the version list."
confbackup_network	=	"Network-Related Settings"
confbkp_all	=	"All System Configurations"
confbkp_bkp_item_desc	=	"The following system configurations will be backed up:"
confbkp_bkp_not_support_network_items	=	"The following configurations will not be backed up when Open vSwitch is enabled or when your server belongs to a high-availability cluster"
confbkp_conf	=	"Configuration version"
confbkp_conf_node_hint	=	"At least one version of system configurations should be backed up."
confbkp_data_service	=	"File Sharing and Backup Services"
confbkp_desc	=	"Export or import a configuration file (.dss) to back up or restore the system configurations of your _OSNAME_."
confbkp_disk_report	=	"Disk Usage Report Settings"
confbkp_domain_ldap	=	"Workgroup, Domain, LDAP"
confbkp_domain_ldap_ssoclient	=	"Workgroup, Domain, LDAP, SSO Client"
confbkp_error_other_os	=	"The selected configuration file is for {0} only, and is not compatible with _OSNAME_."
confbkp_error_version	=	"The selected configuration file is for a newer version of _OSNAME_, and is not compatible with this version."
confbkp_export	=	"Back up Configuration"
confbkp_failed_get_conf_file	=	"Failed to obtain configuration versions."
confbkp_file_not_found	=	"The configuration file is not found. Please make sure the backup data at the destination is not modified and the related backup task is successful, and then try again."
confbkp_footer_desc	=	"Progress:"
confbkp_group_app_privilege	=	"Groups and Application Privileges"
confbkp_group_conflict_list	=	"Groups to be renamed"
confbkp_group_exceed_max	=	"Failed to restore groups because the completion of this restoration task will result in the number of groups exceeding the maximum. "
confbkp_group_exceed_max_param	=	"Failed to restore groups because the completion of this restoration task will result in the number of groups exceeding the maximum: {0}. "
confbkp_group_name_after	=	"Group Name after Restoring"
confbkp_group_name_current	=	"Current Group Name"
confbkp_home_service	=	"User Home"
confbkp_import	=	"Restore Configuration"
confbkp_import_router	=	"Restore Configuration"
confbkp_keep_version	=	"Maximum number of kept versions"
confbkp_max_version	=	"Maximum number of kept configuration versions"
confbkp_no_service_select	=	"Please select at least one configuration."
confbkp_old_config_format	=	"Earliest version"
confbkp_operating_user	=	"The account you are using will no longer belong to the <b>administrators</b> group or will be renamed after restoring. Please log in as <b>admin</b> and try again."
confbkp_other	=	"Other Services"
confbkp_overwrite	=	"Overwrite"
confbkp_overwrite_confirm	=	"Confirmation"
confbkp_overwrite_conflict	=	"Overwrite conflicting user or group settings"
confbkp_overwrite_desc	=	"Do you want to overwrite the conflicting users, groups, or shared folders?"
confbkp_port_conflict	=	"The Port(s) to restore conflicted with the current system settings."
confbkp_restore_select	=	"Select configurations to restore"
confbkp_sftp_port	=	"SFTP Port"
confbkp_share_conflict_description	=	"The list of shared folders below exist in _DISKSTATION_ and will be renamed rather than be overwritten directly after restoration due to the conflicts of ACL or encryption settings."
confbkp_share_conflict_title	=	"Shared folder conflicts"
confbkp_share_name_after	=	"Name after restoration"
confbkp_share_name_current	=	"Current name"
confbkp_share_overwrite	=	"This shared folder exists on your _DISKSTATION_ and will be overwritten by the selected previous version."
confbkp_share_rename	=	"This shared folder exists on your _DISKSTATION_ and will be renamed due to ACL or encryption conflicts. The selected previous version will be restored to your _DISKSTATION_."
confbkp_skip	=	"Skip"
confbkp_skip_conflict	=	"ignore conflicting user or group settings"
confbkp_st_init	=	"Initializing..."
confbkp_st_service_start	=	"Starting system services..."
confbkp_st_service_stop	=	"Stopping system services..."
confbkp_task_scheduler	=	"Task Scheduler"
confbkp_user_app_privilege	=	"Users and Application Privileges"
confbkp_user_conflict_list	=	"Users to be renamed"
confbkp_user_exceed_max	=	"Failed to restore users because the completion of this restoration task will result in the number of users exceeding the maximum."
confbkp_user_exceed_max_param	=	"Failed to restore users because the completion of this restoration task will result in the number of users exceeding the maximum: {0}."
confbkp_user_group	=	"Users and Groups"
confbkp_user_group_conflict_desc	=	"Some user and group names you are about to restore conflict with existing ones. To resolve the naming conflict, these users and groups will be renamed after restoring."
confbkp_user_group_conflict_title	=	"User or Group Naming Conflict"
confbkp_user_group_share	=	"Users, Groups, Shared Folders"
confbkp_user_group_share_privilege	=	"Users, Groups, Shared Folders, Application Privileges"
confbkp_user_name_after	=	"User Name after Restoring"
confbkp_user_name_current	=	"Current User Name"
confbkp_user_share	=	"Users and Shared Folders"
config	=	"Configuration"
config_found_in_account	=	"Compatible system configuration backup files available in your Synology Account. Do you want to restore your settings now?"
configuration_backup_service	=	"Configuration Backup service"
decrypt_dss_title	=	"Enter password or import encryption key"
dsm_version	=	"DSM Version"
enable_autoconfbkp	=	"Enable automatic DSM configuration backup"
error_filename	=	"You have selected a file with an incorrect extension. Please make sure the file extension is ".dss" which is not case-sensitive."
export_conf	=	"Export"
export_import_config_desc	=	"Export or import a configuration file (.dss) to backup or restore the system configuration of your DSM."
export_import_config_title	=	"Export / Import DSM Configuration"
group_desc	=	"Group setting"
imp_assign_file	=	"Select a configuration file from your local computer."
import_conf	=	"Restore"
import_fail	=	"System failed to import the following configuration:"
invalid_encryption_key	=	"Invalid encryption key. Please select the correct key."
invalid_password	=	"Invalid password. Please try again."
last_check_time	=	"Last check"
last_success_bkp_time	=	"Last successful backup time"
last_successful_bkp_time	=	"Last successful backup"
leaf_connectivity	=	"Connectivity"
leaf_dsm	=	"DSM settings"
leaf_http_compression	=	"Security - Advanced settings"
leaf_public_access	=	"External Access - Advanced settings"
login_synoaccount_enable_autobkp	=	"To enable automatic backup, please sign in to your Synology Account first."
login_synoaccount_enable_restore	=	"To restore from Synology Account, please sign in to your Synology Account first."
manually_export	=	"Manual Export"
manually_export_desc	=	"Manually export a system configuration backup file (.dss) and save it to your computer."
model_name	=	"Model Name"
network_conf	=	"Network Configuration"
network_issue	=	"Connection failed. Please refer to {0}this article{1} for solutions."
no_backup	=	"Data not backed up"
no_dss_version	=	"No backup version found in your Synology Account. Please import a backup file from your computer."
parent_and_traffic_control	=	"Parental and Traffic Control"
password_input_title	=	"The backup file you have selected is encrypted. Please enter the password or import its encryption key."
please_select_dss	=	"Please select configuration file from your computer."
please_select_enckey	=	"Please select the encryption key from your computer."
restore_config	=	"Restore DSM Configurations"
restore_config_desc	=	"Restore some or all DSM configurations from your configuration backup file (.dss)."
restore_configuration	=	"Restore Configuration"
restore_from_local_upload	=	"Restore from a configuration file on your computer"
restore_from_synoaccount	=	"Restore from Synology Account"
restore_from_synoaccount_desc	=	"Restore the latest backup version saved in your Synology Account."
restore_now	=	"Restore Now"
select_one_version	=	"Select a configuration version to restore."
select_restore_config_source	=	"Select the source for restoring your DSM configurations"
select_restore_config_version	=	"Select a backup version"
select_restore_items	=	"Select Restore Items"
select_restore_source	=	"Select source"
self_enc	=	"Self-defined encryption"
serial_number	=	"Serial Number"
session_expired	=	"Timeout. Please try again."
share_desc	=	"Shared folder setting"
system_restoration	=	"System Restoration"
upload_confirm	=	"Warning: The restore function will restore the previous settings to your current system. All services will be stopped during the operation, and resume after the operation is completed. Are you sure you want to continue?"
upload_confirm_minutes	=	"Warning: The restore function will restore the previous settings to your current system. All services will be stopped during the operation, and resume after the operation is completed. This may take a few minutes. Are you sure you want to continue?"
upload_confirm_restart_network	=	"Warning: The restore function will restore the previous settings to your current system. All services and network connection will be stopped during the operation. After completion, your _DISKSTATION_ will resume all services and network connection, and may change its IP address due to the previous settings. Are you sure you want to continue?"
upload_err_deny	=	"Permission denied."
upload_err_format	=	"The file was not encoded with specific format!"
upload_err_no_space	=	"The available disk space is insufficient."
upload_err_quota	=	"Your personal data has exceeded the quota."
upload_err_readonly	=	"You are not allowed to upload file to this folder."
uploading	=	"The system is transferring the data. Please wait..."
user_desc	=	"User setting"
user_quota_desc	=	"User quota setting"
verify_log	=	"For more information, please go to Backup & Replication and check the logs."
verify_log_center	=	"For more information, please go to Log Center and check the logs."

[connections]
accessed_files	=	"Accessed Files"
confirm_kick_self	=	"Are you sure you want to kill your own connection?"
confirm_kill_connection_others	=	"Do you want to end all connections?<br>This user is currently connected via: {0}<br>For security reasons, we recommend ending the connections right away. Please keep in mind that this will interrupt any ongoing file transfers."
confirm_kill_connection_self	=	"Do you want to end all connections?<br>You are currently connected via: {0}<br>For security reasons, we recommend ending the connections right away. Please keep in mind that this will interrupt any ongoing file transfers."
connections_title	=	"Connected Users"
disable_this_account	=	"Deactivate User"
end_connections	=	"End Connections"
error_disable_admin_name	=	"Failed to deactivate the user. There should be at least one valid _OSNAME_ administrator (admin or a user belonging to the  administrators group) in the system."
file_handle_cannot_kick_msg	=	"Only files opened by SMB, AFP, FTP, SFTP, Telnet, and SSH can be closed."
file_handle_cannot_kick_title	=	"The selected file cannot be closed"
file_handle_kick_msg	=	"Killing the service connection will force close the following files and may affect the user who is currently using them."
file_handle_kick_self_msg	=	"Killing the service connection will force close the following files."
kick_connection	=	"Kill Connection"
kick_connection_br	=	"Kill Connection"
last_access_time	=	"Last Accessed"
search_connections	=	"Search"
service	=	"Service"
status_connecting	=	"Connecting..."
title	=	"Connections"

[connsecurity]
connscr_add_ip	=	"Add an IP to the block list."
connscr_no_blockedip	=	"There are no blocked hosts."
connscr_subject	=	"Block list"
connscr_tip	=	"Deny users to access from the following hosts."

[controlpanel]
acl_desc	=	"You can create access control profiles to restrict user access according to the source IP."
active_insight	=	"Active Insight"
active_insight_performance_metric	=	"Performance metric collection"
active_insight_performance_metric_desc	=	"This option allows the collection of metrics for performance and system analytics. It may consume system resources, such as I/O utilization and memory. With this option disabled, you can only monitor this _DISKSTATION_ in Basic Mode on Active Insight."
advanced	=	"Advanced"
advanced_mode	=	"Advanced Mode"
app_port_alias_title	=	"Application Portal"
applications	=	"Applications"
applications_acl_desc	=	"After creating access control profiles for applications, users from denied IP addresses will not be able to open these applications."
applications_domain_desc	=	"You can point domain names to Synology packages, such as File Station, and access them through customized domains."
applications_web_service_desc	=	"Once the customized alias or port is enabled, users can sign in to applications directly in a new browser window without having to sign in to DSM first."
bad_alias_detail	=	"The alias must be between 2 to 20 characters and can only contain alphanumerics and dashes (-). It must start with alphanumerics."
connectivity	=	"Connectivity"
customized_domain	=	"Customized domain"
customized_port_http	=	"Customized port (HTTP)"
customized_port_https	=	"Customized port (HTTPS)"
dashboard	=	"Overview"
desc_acl_profile	=	"The profiles listed here can be applied to Web Station or the applications in the Applications tab. Please go to the respective pages to configure them."
devices_and_printers	=	"Devices and Printers"
directory_service_title	=	"Domain/LDAP"
domain_privilege	=	"Domain<br>Privileges"
dsm_domain_desc	=	"You can point a registered domain name to your _DISKSTATION_."
dsm_port_http	=	"DSM port (HTTP)"
dsm_port_https	=	"DSM port (HTTPS)"
edit_application_login_settings	=	"Edit Login Settings for {0}"
edit_application_login_style	=	"Edit the Login Style for {0}"
edit_login_style	=	"Edit"
file_services_advance	=	"Advanced settings in File Services"
leaf_account_security	=	"Account"
leaf_appprivilege	=	"Application Privileges"
leaf_autoblock	=	"Auto Block"
leaf_backup_service	=	"Backup Service"
leaf_cloud_service	=	"QuickConnect"
leaf_cms	=	"CMS"
leaf_default	=	"Restore<br>Defaults"
leaf_dhcp_server	=	"DHCP Server"
leaf_dos_and_vpnpassthrough	=	"Protection"
leaf_dsm	=	"_OSNAME_ Settings"
leaf_file_services	=	"File Services"
leaf_firewall	=	"Firewall"
leaf_group	=	"Group"
leaf_hardware	=	"Hardware"
leaf_hardware_power	=	"Hardware & Power"
leaf_index_service	=	"Indexing Service"
leaf_index_service_index	=	"Indexing Service"
leaf_index_service_title	=	"Indexing Service"
leaf_info_center	=	"Info Center"
leaf_lan	=	"Network"
leaf_mailstation	=	"Mail Server"
leaf_media_library	=	"Media Indexing"
leaf_mediaservice	=	"Media Server"
leaf_netbkp	=	"Network<br>Backup"
leaf_notification	=	"Notification"
leaf_powermgr	=	"Power"
leaf_public_access	=	"External Access"
leaf_region	=	"Regional Options"
leaf_routerconf	=	"Router<br>Configuration"
leaf_security	=	"Security"
leaf_service	=	"Web Services"
leaf_sharefolder	=	"Shared Folder"
leaf_smartblock	=	"Account Protection"
leaf_style	=	"Theme"
leaf_terminal_snmp	=	"Terminal & SNMP"
leaf_update	=	"_OSNAME_ Update"
leaf_update_reset	=	"Update & Restore"
leaf_user	=	"User"
leaf_user_group	=	"User & Group"
leaf_wireless	=	"Wireless"
login_portal_desc	=	"Configure the login styles and network settings for DSM and specific applications."
login_portal_label	=	"Login Portal"
login_settings_label	=	"Login Settings"
login_style_label	=	"Login Style"
metadata_title	=	"System<br>Database"
node_device	=	"External Devices"
node_privileges	=	"Application Privileges"
note_source_ip_or_cidr	=	"The rules are applied from top to bottom. Leave the Source IP or CIDR field empty to apply to all IP and CIDR."
performance	=	"Performance"
reverse_proxy_desc	=	"Your _DISKSTATION_ can act as a reverse proxy server that transfers requests from the Internet to devices in the local network."
simple_mode	=	"Simple Mode"
switch_advanced_mode	=	"Advanced Mode"
switch_basic_mode	=	"Basic Mode"
synology_account	=	"Synology Account"
task_scheduler	=	"Task Scheduler"
tip_source_ip_or_cidr	=	"Classless Inter-Domain Routing (CIDR) is a method for efficient allocation of IP addresses and IP routing, such as 192.168.100.1/24."
web_service	=	"Web Services"

[convert_progress]
desc	=	"The system will generate thumbnails from the uploaded images and convert videos for a better viewing experience in Synology Photos or Media Server. This process requires high CPU resources. To mitigate the impact on your system, you can pause and resume the process later, or schedule a time to run the process."
title	=	"Processing images/videos"

[convert_setting]
description	=	"The converted thumbnails for photo and videos will optimize browsing experience on different devices."
end_time	=	"End Time"
frequency	=	"Frequency"
progress	=	"View progress"
scheduler_enabled	=	"Enable conversion by schedule"
start_time	=	"Start Time"
title	=	"Conversion Settings"
tomorrow	=	"Next day"
video_conversion_desc	=	"To view videos in the "photo" shared folder of Photo Station on your mobile devices, you can enable video conversion for mobile devices."
video_conversion_note	=	"Enabling this option will take more time and CPU resources."
video_convert_enable_mobile_support	=	"Enable video conversion for mobile devices"
video_setting_title	=	"Video Settings"

[copyright]
copyright	=	"Copyright © {0} Synology Inc. All rights reserved."
copyright_mark_desc	=	"<p>Synology and other names of Synology products are trademarks or registered trademark of Synology Inc.</p><p>Microsoft, Windows, Windows NT and Internet Explorer are trademarks of Microsoft Corporation.</p><p>Apple and Macintosh are trademarks of Apple Computer Inc.</p><p>Intel is a trademark of Intel Corporation.</p><p>Other products and company names mentioned herein may be the trademarks of their respective owners.</p>"
copyright_mark_title	=	"Trademark Notice"
copyright_note_desc	=	"<p>All titles, copyright and other intellectual property rights in and attached to the Software Product (including but not limited to any relevant media, images, photographs, animations, video, audio, music, text, and applets incorporated into the Software Product), the accompanying manuals and other documents, and on-line or electronic documents, if any, (collectively "Software Product") are owned by Synology Inc. Unless otherwise expressly licensed by Synology Inc. in writing, any provision of the Software Product does not represent any license of any of the above rights.</p><p>The copyright and other intellectual property rights of the multimedia files, including but not limited to photos, videos, music, network videos, and electronic files, saved using the applications provided with the Software Product by the user are owned by the user or other 3rd parties.</p><p>Copyright &copy; 2004-2012 Synology Inc. All rights reserved.</p><p>Portions Copyright &copy; 2004 Intel Corporation.</p><p>Portions of this software are modified from GPL source. If you need the modified GPL sources, please visit the Synology web site to request GPL Sources.</p>"
copyright_note_title	=	"Copyright Notice"

[dashboard_version]
downloading	=	"Downloading..."
system_busy	=	"System busy"
up_to_date	=	"Up to date"
upgrade_ready	=	"Ready for update"
upgrading	=	"Upgrading..."

[data_scrubbing]
abnormal	=	"The status of the storage pool is abnormal. Data scrubbing cannot be performed."
abnormal_shutdown_notify	=	"Due to either abnormal power failure or reassembling of storage pool, Storage Pool {0} has automatically executed data scrubbing to ensure data consistency. To cancel, go to Storage Manager > Storage Pool > Data Scrubbing."
add_in_schedule	=	"Add to schedule"
apply	=	"Apply"
attention	=	"Unable to run data scrubbing because the storage pool is in abnormal status."
busy	=	"Unable to run data scrubbing because the storage pool is busy"
cancel_schedule_note	=	"This action will cancel all the scheduled tasks. All the progress will be cleared."
cancel_schedule_tasks_title	=	"Cancel Scheduled Tasks"
cancel_scrubbing_confirm	=	"Canceling data scrubbing will reset all progress. Are you sure you want to cancel it?"
choose_target	=	"Select Target"
crashed	=	"Unable to run data scrubbing because the storage pool has crashed."
data_scrubbing_schedule_time_window_invalid_msg	=	"Select at least one cell and set it as an allowed period for the system to run data scrubbing."
data_scrubbing_support	=	"Support data scrubbing"
data_scrubbing_support_title	=	"Support Data Scrubbing"
degrade	=	"Unable to run data scrubbing because the storage pool has degraded."
disable_schedule_scrubbing_confirm	=	"If you disable the data scrubbing schedule, the scheduled data scrubbing session that is running will be canceled."
disable_schedule_scrubbing_confirm_title	=	"Disable Data Scrubbing Schedule?"
done	=	"Done in this schedule"
done_in_this_schedule	=	"Done"
enable_schedule	=	"Enable Data Scrubbing schedule"
exec_date_no_date_string	=	"- -"
exec_date_sche_is_running	=	"Running"
exec_date_will_execute_now	=	"Run now"
execute_date	=	"Next run time"
finished	=	"Completed"
fs_scrubbing_support	=	"File System Scrubbing Supported"
has_not_run_yet	=	"Never performed yet"
interval	=	"Frequency"
kernel_running	=	"Running"
last_run	=	"Completed on"
last_run_on	=	"Last run on {0}"
lim_scrubbing_time_section	=	"Run data scrubbing only during specific periods"
lim_scrubbing_time_section_desc	=	"Running data scrubbing may take some time and occupy computing resources. You can set data scrubbing to run only during specific periods and thereby prevent this process from affecting the system performance when other important services or tasks are in progress."
manual	=	"Customize"
manual_action	=	"Manual Run"
manual_config_time	=	"Run on the scheduled time"
manual_exec_confirm	=	"It may take a while to execute data scrubbing and may affect system performance. Please make sure that no important services or tasks are in progress."
manual_running	=	"Manual running"
manual_start	=	"Run Now"
manual_start_confirm	=	"If you run Data Scrubbing manually, this storage pool will be removed from the schedule."
modify_schedule_start_time_confirm	=	"Altering the starting date will cancel the schedule and delete the progress of the scheduled tasks that are currently in process."
modify_schedule_start_time_confirm_title	=	"Reset Data Scrubbing Schedule?"
never	=	"Never"
no_action	=	"No action"
no_target_confirm	=	"Please select at least one storage pool to enable the schedule."
not_allow_apply_hint_no_pool	=	"Select at least one storage pool to enable data scrubbing schedule."
not_support	=	"{0} not supported"
not_support_scrubbing	=	"Data Scrubbing is not supported"
not_yet_processed	=	"Not performed yet"
option_start_in_next_time	=	"Run later (according to the set frequency)"
pause_schedule	=	"Pause Schedule"
paused	=	"Paused"
pending	=	"Suspended by schedule"
raid_and_fs_not_support	=	"{0} and ext4 not supported"
raid_not_support	=	"{0} not supported"
raid_not_support_and_no_available_volume	=	"{0} not supported if it has no Btrfs volumes"
raid_scrubbing_support	=	"Support RAID scrubbing"
ready	=	"Ready"
reason_not_support	=	"Reason"
remove_from_schedule	=	"Remove from schedule"
reset_schedule_confirm	=	"This action will stop the schedule and delete the progress of scheduled tasks that are currently in process. All storage pools will be removed from this schedule."
reset_schedule_plan	=	"Reset schedule"
resume_schedule	=	"Resume Schedule"
resync_speed_note	=	"This setting will affect the speed limit when running data scrubbing, repairing, expanding storage pools, and changing RAID types."
resync_speed_range_warning	=	"The value must be between 0 to 10,000."
resync_speed_setting_warning	=	"The maximum value must be greater than the minimum value."
resync_speed_setting_warning_min_col	=	"The minimum value must be smaller than the maximum value."
run_all_time	=	"Run at all times"
run_data_scrubbing	=	"Run data scrubbing"
run_date	=	"Run on the following date"
run_scrubbing_now_confirm	=	"Run Now"
run_scrubbing_now_desc	=	"Click Run Now to run data scrubbing immediately, or click Run on Schedule to run it according to the set schedule."
run_scrubbing_now_title	=	"Run data scrubbing now?"
run_scrubbing_on_schedule	=	"Run on Schedule"
running	=	"Running (started from {0})"
schedule	=	"Schedule"
schedule_cancel_confirm_desc	=	"The data scrubbing in process will be canceled."
schedule_disable	=	"Data scrubbing schedule canceled"
schedule_disabled	=	"Please enable and set up the schedule first."
schedule_done	=	"Scheduled"
schedule_on	=	"Scheduled on {0}"
schedule_paused	=	"Schedule paused"
schedule_plan_title	=	"Schedule Settings"
schedule_pool_grid_title	=	"Data scrubbing can only run on one storage pool at a time. Please select and prioritize the storage pools that you want to perform data scrubbing."
schedule_reason_abnormal	=	"Data scrubbing cannot be performed because the storage pool status is abnormal"
schedule_reason_fwupgrade	=	"Cannot run data scrubbing because the storage pool contains drives that require a firmware update."
schedule_reason_incompatible	=	"Data scrubbing cannot be run or scheduled because the storage pool has drives that are not on the Synology Products Compatibility List."
schedule_reason_passive_fwupgrade	=	"Cannot run data scrubbing because the storage pool on the passive server contains drives that require a firmware update."
schedule_reason_passive_incompatible	=	"Data scrubbing cannot be run or scheduled because the storage pool on the passive server has drives that are not on the Synology Products Compatibility List."
schedule_running	=	"Schedule running"
schedule_status	=	"Schedule Status"
schedule_tip_title	=	"Schedule"
schedule_updated	=	"Data scrubbing schedule updated"
scrubbing_outline	=	"Performing data scrubbing periodically ensures data consistency and lowers the risk of data loss in the event of a drive failure."
scrubbing_status	=	"Status"
scrubbing_window_checkbox_text	=	"Enable data scrubbing schedule"
scrubbing_window_title	=	"Schedule Data Scrubbing"
set_new_schedule_confirm_desc	=	"If you modify the schedule settings now, the scheduled data scrubbing session that is running will be canceled and rerun according to the new schedule."
set_new_schedule_confirm_title	=	"Reschedule Data Scrubbing?"
set_schedule	=	"Set Schedule"
set_schedule_confirm	=	"Removing the storage pool from the schedule will delete its Data Scrubbing progress."
set_schedule_restart_confirm	=	"{0} is performing data scrubbing. If you modify the schedule settings now, the current data scrubbing session will be canceled and rerun according to the new schedule. Are you sure you want to continue?"
set_schedule_restart_confirm_multiple	=	"{0} are performing data scrubbing. If you modify the schedule settings now, the current data scrubbing session will be canceled and rerun according to the new schedule. Are you sure you want to continue?"
set_time_session	=	"Set Time Grid"
set_time_session_title	=	"Set Time Grid"
set_up_schedule	=	"Set Up"
setting_note	=	"This setting will apply to all storage pools added to this data scrubbing schedule."
skip_space_confirm	=	"All progress of this storage pool will be deleted. The storage pool will be skipped in this round of data scrubbing."
skipped	=	"Skipped in this schedule"
speed_limit	=	"RAID Resync Speed Limits"
speed_limit_fast	=	"Run RAID resync faster"
speed_limit_max	=	"Max"
speed_limit_min	=	"Min"
speed_limit_slow	=	"Lower the impact on overall system performance (recommended)"
start_date	=	"Start date"
start_on	=	"Start on {0}"
suspend	=	"Postponed"
suspend_data_scrubbing	=	"Pause data scrubbing"
target	=	"Target"
target_abnormal	=	"Status Abnormal"
target_note	=	"Please select the storage pool(s) which you want to add to the schedule."
target_notification_when_disable_schdule	=	"Please go to {0} to enable Data Scrubbing schedule first."
target_notification_when_disable_schedule	=	"Please go to {0} to enable Data Scrubbing schedule first."
time_session	=	"Time Session"
time_session_note_desc	=	"If data scrubbing is not completed within the allowed data scrubbing time (i.e., the cells in blue), it will pause automatically and resume in the next allowed time."
time_session_note_text	=	"Note:"
time_session_window_desc	=	"Data scrubbing may affect system performance. You can set a specific time for performing data scrubbing, thereby preventing it from affecting system performance."
unable_pool_grid_title	=	"Data scrubbing cannot run on the storage pools below"
wait_busy_pool	=	"Can be scheduled to run later (storage pool is busy)"
wait_for_another_operation	=	"Waiting for another operation to finish"
wait_for_another_task	=	"Waiting for another task to finish"
wait_for_setting	=	"No starting date and target has been selected"
wait_to_set_up_schedule_setting	=	"Please set up the schedule first"
waiting	=	"Waiting"
will_start_on	=	"Will Start on {0}"

[dcoutput]
dcoutput_desc	=	"Enable DC power supply and schedule it to power the output on and off at a specified time."
dcoutput_schedule_title	=	"Schedule DC output"
dcoutput_status_off	=	"OFF"
dcoutput_status_on	=	"ON"
dcoutput_status_title	=	"DC output status"
enable_dcoutput	=	"Enable DC output"
schedule_dcoutput	=	"Add schedule"

[ddns]
ddns_type_synology	=	"Synology DDNS service"
service_ddns_one_hostname_in_synology	=	"You can only register one hostname for each NAS in Synology DDNS"

[ddsm]
ddsm_is_running	=	"DDSM is running"
ddsm_remove_by_share_delete	=	"DDSM [{0}] is unavailable because its dependant shared folder [{1}] has been deleted."
dsm_upgrade_check	=	"After upgrading DSM, you must upgrade all DDSM instances to be able to run these instances."
net_iface_change_alert	=	"The interfaces connected to DDSM will be updated and running DDSM connected to the interface will be restarted."
share_used_by_running_ddsm	=	"This shared folder is being used by a running DDSM."
unsupport_on_non_privileged_mode	=	"Cannot mount remote folder. Please ask your host to modify DDSM privileges settings to use this feature."

[default1]
default_btn_apply	=	"Erase All Data"
default_btn_apply_router	=	"Restore factory default settings"
default_choose	=	"Restore Options"
default_confirm	=	"Your data will be completely removed and the _DISKSTATION_ device will be restored to its default settings. Are you sure you want to continue?"
default_confirm_check	=	"I understand all my data will be deleted forever and unrecoverable."
default_confirm_sql1	=	"Warning: The function will delete all data in the databases. Are you sure you want to continue?"
default_confirm_sql2	=	"Warning: The root password of MySQL database will be reset. Are you sure you want to continue?"
default_confirm_writeable	=	"Warning: The function will erase all settings and restore to factory default settings. Are you sure you want to continue?"
default_fail	=	"Failed to restore default settings."
default_opt1	=	"Format the hard disk but keep the current settings"
default_opt2	=	"You can restore your _DISKSTATION_ to its original manufacturer settings. All user data stored on the drives will be erased and the entire system will be restored to default settings."
default_reinstall	=	"_DISKSTATION_ is rebooting. Use Synology Assistant to install the _DISKSTATION_ again after boot-up."
default_reset_mysql	=	"Delete MySQL Databases"
default_reset_mysql_passwd	=	"Reset MySQL Database Password"
default_reset_writeable	=	"Restore to factory default settings"
default_subject	=	"Format"
default_success	=	"Successfully restored default settings."
default_warn_cancel	=	"Warning: The USB backup process will be stopped before the factory default operation starts. Are you sure you want to continue?"
prompt	=	"To confirm, please type the server name "{0}" exactly as shown."
reset_button_option_fieldset_desc	=	"When you press and hold down the RESET button on your _DISKSTATION_ to reset it, the following settings will be activated."
reset_button_option_fieldset_title	=	"Manual Reset"
reset_button_option_lock_encrypted_storage	=	"Automatically lock encrypted storage entities"
reset_button_option_lock_encrypted_storage_desc	=	"Any supported and enabled encrypted storage entities on your model, such as volumes or shared folders, will be locked to prevent unauthorized access, and the key vaults will be erased and disabled."
reset_button_option_retain_admin_pwd_desc	=	"The admin password will not be changed and password reset step will be skipped."
reset_button_setting	=	"Reset Option"
retain_admin_pwd	=	"Keep admin password unchanged"
retain_admin_pwd_desc	=	"When you press and hold the RESET button on your _DISKSTATION_ for 4 seconds for system reset, the admin's password will not be changed and the password reset step will be skipped."
retain_admin_pwd_desc_vdsm	=	"Resetting the system will not change your current password for the admin account."

[delegation]
all_account	=	"All users and groups"
contain_admin_user	=	"One or more of the selected users belong to the administrator group, which has full management permissions"
delegate	=	"Delegate"
delegate_to	=	"Delegate to"
delegation	=	"Delegation"
delegation_confirm	=	"You should only delegate to people you can trust. Please enter your password to confirm this action."
delegation_rule_max	=	"You have reached the maximum quota."
desc	=	"Delegate roles to non-admin users to enhance management efficiency. Please consult this {0}Help{1} article for information on the full permission of each role."
directory_account	=	"Directory users and groups only"
empty_setting	=	"No roles have been delegated. Go to <b>User</b> or <b>Group</b>, select the user or group to delegate roles to, and click <b>Delegate</b> > <b>Delegated Administration</b> to set up."
export	=	"Export"
export_desc	=	"Export the delegation list as a CSV file."
failed_get_preview	=	"Unable to preview role delegation privileges. Please restore server configurations first and try again."
failed_get_privs	=	"Unable to load role delegation privileges. Please restore server configurations first and try again."
failed_get_roles	=	"Unable to load the role delegation list. Please restore server configurations first and try again."
failed_set_privs	=	"Unable to set role delegation privileges, possibly because the network connection is unstable or the system is busy. Please try again."
full_permission_desc	=	"See full permission set"
is_admin_user	=	"{0} belongs to the administrator group, which has full management permissions"
local_account	=	"Local users and groups only"
permission_preview	=	"Permission Preview"
permission_viewer	=	"Permission Viewer"
preview_by_account	=	"By user and group accounts"
preview_by_roles	=	"By role delegation"
role_access_control	=	"Access control and management"
role_access_control_desc	=	"Delegate permissions to manage block lists, protected accounts, and trusted clients."
role_directory_account	=	"Directory account and group management"
role_directory_account_desc	=	"Delegate permissions to edit directory users and groups.<br>Delegate permissions to update domain information."
role_hyper_backup	=	"Hyper Backup management"
role_hyper_backup_desc	=	"Delegate permissions to execute backup tasks for Hyper Backup."
role_local_account	=	"Local user and group management"
role_local_account_desc	=	"Delegate permissions to create, edit, and delete users and groups."
role_service_maintenance	=	"System service management"
role_service_maintenance_desc	=	"Delegate permissions to run, update, and repair installed packages.<br>Delegate permissions to assign application privileges to existing users and groups."
role_shared_folder	=	"Shared folder management"
role_shared_folder_desc	=	"Delegate permissions to create, edit, and delete shared folders.<br>Delegate permissions to assign shared folder permissions to existing users and groups."
role_system_monitoring	=	"System monitoring"
role_system_monitoring_desc	=	"Delegate permissions to monitor the system status in Info Center and Resource Monitor."
roles	=	"Role Delegation"
tip_user_ask_admin_to_set_notification	=	"Please contact the <b>administrators</b> to enable email notification service first."
title	=	"Delegated Administration"
warn_denied_access	=	"You are a member of the group {0}. If you change the permission to {1} for this group, you will no longer have access to {2}."

[desktop]
add_shortcut	=	"Create desktop shortcut"
confirm_leave	=	"You are about to leave or refresh this page. Unsaved changes and ongoing tasks will be lost or cancelled."
confirm_unload	=	"You are about to log out of {0}."
expose_window	=	"Pilot View"
maximize	=	"Maximize"
minimize	=	"Minimize"
open_in_new_window	=	"Open in new window"
remove_shortcut	=	"Remove shortcut"
restore	=	"Restore"
shortcut	=	"Shortcut"
shortcut_existed	=	"The following shortcuts will not be created because they are already on your desktop:"
shortcut_zone_instruction	=	"Drag and drop applications to create desktop shortcuts"
show_desktop	=	"Show Desktop"
taskbar	=	"Taskbar"
taskbar_pin	=	"Pin to Taskbar"
taskbar_unpin	=	"Unpin from Taskbar"
upgrade_ie_browser	=	"Please upgrade to the latest version of Internet Explorer browser to get the best quality."
window_last_hint	=	"This is the last element in the window. Press Tab to return to top."
window_toolbar_list	=	"Window Toolbar"

[dhcp_server]
address_reservation	=	"DHCP Reservation"
bootloader_root_folder_tip	=	"The boot loader file must be placed in the TFTP root folder."
check_firewall_msg	=	"Please go to Security > Firewall and make sure access to {0} port(s) {1} is allowed."
clear_reservation_tip	=	"This reservation will be removed if details are cleared. Are you sure you want to continue?"
click_lock_icon_tip	=	"Reserve the IP address for the current device by clicking the lock icon."
client_list	=	"DHCP Clients"
create_reserved_addr	=	"Add"
create_subnet	=	"Create DHCP Subnet"
create_vendor_option	=	"Create Vendor"
current_ip	=	"Current IP"
dhcp_broadcast_err	=	"Start and end IP addresses cannot be the same as broadcast IP address."
dhcp_enabled	=	"DHCP Server"
dhcp_gateway_err	=	"The IP addresses of the default gateway and your router must be in the same subnet."
dhcp_range_end	=	"End IP address"
dhcp_range_err	=	"Invalid subnet range."
dhcp_range_start	=	"Start IP address"
dhcp_wpad_enable	=	"Enable Web Proxy Automatic Discovery"
dhcp_wpad_url	=	"URL"
dhcpv4_disabled	=	"DHCPv4 disabled"
dhcpv4_enabled	=	"DHCPv4 enabled"
dhcpv6_disabled	=	"DHCPv6 disabled"
dhcpv6_enabled	=	"DHCPv6 enabled"
disable_dhcpd	=	"Disable DHCP"
disable_dhcpv4	=	"Disable DHCPv4"
disable_dhcpv6	=	"Disable DHCPv6"
domain_name	=	"Domain name"
edit_reserved_addr	=	"Edit"
edit_subnet	=	"Edit DHCP Subnet"
edit_vendor_option	=	"Edit Vendor Settings"
enable_dhcpd	=	"Enable DHCP server"
enable_dhcpv4	=	"Enable DHCPv4"
enable_dhcpv6	=	"Enable DHCPv6"
enable_pxe	=	"Enable PXE (Pre-boot Execution Environment)"
error_duplicated_ip	=	"This IP address has already been reserved, please use another one."
error_reserved_addr	=	"0 and 1 are reserved addresses. Please enter a different address."
expire_time	=	"Expired In"
expired	=	"Expired"
gateway	=	"Gateway"
gateway_diff_subnet_err	=	"The gateway should belong to the same subnet."
hostname	=	"Hostname"
ip	=	"IP"
ip_broadcast_err	=	"{0} cannot be broadcast IP address."
ip_mac_empty_error	=	"Please fill in the MAC and IP address."
ip_networkid_err	=	"{0} cannot be network ID."
ipv6_ending_address	=	"End IPv6 address"
ipv6_prefix	=	"IPv6 prefix"
ipv6_primary_dns	=	"Primary DNS (IPv6)"
ipv6_secondary_dns	=	"Secondary DNS (IPv6)"
ipv6_starting_address	=	"Start IPv6 address"
leasetime	=	"Address lease time"
local_pxe_need_tftp	=	"To use PXE, go to {0} to enable the TFTP service first."
local_tftp_server	=	"Local TFTP server"
mac	=	"MAC"
mac_already_exist_err	=	"The MAC address already exists."
must_at_least_one_enabled_subnet	=	"Activate at least one subnet."
need_static_ip_msg	=	"This network interface is already using DHCP to get an IP address. It is not recommended to enable DHCP Server on a network interface already using DHCP. Are you sure you want to continue?"
netmask	=	"Netmask"
no_subnet_err	=	"Please specify at least one subnet."
option_contain_comma_warn	=	"The value should not include commas."
option_empty_value_warn	=	"The value cannot be empty."
option_in_same_subnet_warn	=	"{0} and {1} should be in the same subnet."
option_int_range_warn	=	"The value should be between {0} and {1}."
option_ip_mask_pair_warn	=	"The value should be pairs of IP addresses and masks."
option_list	=	"DHCP options"
option_name	=	"Name"
option_netbios_nodetype_warn	=	"The value can only be 1, 2, 4, or 8."
option_not_support	=	"DHCP option [{0}] is not supported."
option_num	=	"Code"
option_static_route_warn	=	"The value should be IP/[0-32] and router IP pairs."
option_valid_ip_list_warn	=	"The value should be IP address(es)."
option_valid_ip_warn	=	"The IP address is invalid."
option_value	=	"Value"
option_warning_title	=	"Incorrect DHCP option [{0}]."
option_wrong_value	=	"DHCP option [{0}] has an invalid value."
primary_dns	=	"Primary DNS"
pxe_bootloader_loc_tip	=	"Please go to {0} to make sure the bootloader file is in the TFTP root folder."
pxe_enable_tftp_first_tip	=	"Before configuring the PXE service, please go to {0} to set up the TFTP service first."
pxe_need_at_least_one_enable_subnet_tip	=	"To use PXE, go to Control Panel > DHCP Server > Network Interface first to enable at least one subnet for network interfaces connected to DHCP clients."
pxe_title	=	"PXE"
remote_tftp_server	=	"Remote TFTP server"
reservation_record_grey_tip	=	"This reservation is not in use."
reserved	=	"Status"
reservedip_clientip_diff_tip	=	"The reserved IP address differs from the device's current IP address, and will be assigned to this device once the current lease expires."
reservedip_conflict_err	=	"This reserved IP address is already used."
secondary_dns	=	"Secondary DNS"
server_ip	=	"IP address"
server_list_title	=	"Network Interface"
show_all	=	"All"
show_client_only	=	"DHCP clients"
show_reservation_only	=	"DHCP reservations"
startip_bigger_endip_err	=	"The start IP address cannot exceed the end IP address."
subnet	=	"Subnet list"
subnet_empty_error	=	"Please fill in the subnet information fields."
subnet_range_tip	=	"The subnet range begins from {0} to {1}."
two_ip_diff_subnet_err	=	"{0} and {1} belong to different subnets."
unlimited	=	"Unlimited"
unlock_remove_reservation_tip	=	"This reservation will be removed if unlocked. Are you sure you want to continue?"
vendor_name	=	"Name"
vendor_name_exist	=	"This vendor name already exists."
vendor_option_exist	=	"This DHCP option already exists."
vendor_option_title	=	"DHCP options for vendors"
vendor_title	=	"Vendor"

[directory_service]
action_absent_srv_record	=	"Please go to your DNS server [{dns}] and create the absent SRV records according to <a target="_blank" href="{link}">the SRV Resource Records</a> page on Microsoft Docs.<br>Note: Once you complete the configuration, click the Check Again button to resume checking.<br>The absent SRV records:{absent_srv_record}"
action_account_lockout	=	"Please check for the availability of this account on a domain controller and join the domain again. Alternatively, you can retry the operation using another account with sufficient privileges."
action_ad_machine_logon_fail	=	"Please reactivate Synology Directory Server at Package Center. If the issue persists, please contact <a class="link-font" target="_blank" href="https://www.synology.com/company/contact_us">Synology Technical Support</a>."
action_add_ntpassword	=	"Please configure the sambaNTPassword attribute for the following users. Once you complete the configuration, click the Check Again button to resume checking.<br>The users without the sambaNTPassword attribute:{list}"
action_add_ntpassword_or_enable_cifs_pam	=	"Please configure the sambaNTPassword attribute for the following users. Once you complete the configuration, click the Check Again button to resume checking.<br>The users without the sambaNTPassword attribute:{list}<br>Alternatively, enable the following option to fix the issue."
action_bad_auth_info	=	"Please check and enter your authentication information again."
action_bad_profile	=	"Please enter correct filters and attributes in the profile."
action_can_not_find_any_dc	=	"Please try one of the following operations:<br>1. Check if all the domain information was entered correctly (e.g., the IP address of DNS server).<br>2. Close the wizard and launch it again to check if there are minor or critical issues needed to be resolved."
action_check_cldap_fail	=	"The CLDAP service is unavailable on the following domain controller: {ips}. Please try one of the following operations:<br>1. Specify the correct IP address of the domain controller.<br>2. Confirm that port 389 is not blocked by a firewall of any devices, such as a router or a gateway, in the network topology between this _DISKSTATION_ and the domain controller.<br>Learn more about the <a target="_blank" href="{link}">CLDAP service</a>."
action_check_gpo_fail	=	"Please go to one of the domain controllers, and edit <b>Default Domain Controllers Policy</b> to allow the machine account of this _DISKSTATION_ to access domain data. You can refer to <a target="_blank" href="{link}">this article</a> for detailed instructions."
action_check_remote_smb_status	=	"Please check the status of the SMB service on the domain controller {ip}."
action_check_remote_smb_statuses	=	"Please check the status of the SMB service on the following domain controllers. {ips}"
action_check_spn_fail	=	"Please go to a domain controller and add the following SPNs for the machine account of this _DISKSTATION_. If your domain is built with Synology Directory Server, please add these SPNs via RSAT (Remote Server Administration Tools).<br>Note: Once you complete the configuration, click the Check Again button to resume checking.{missingSPN}"
action_check_tls_fail	=	"Please try one of the following operations:<br>1. Make sure that your domain controller supports STARTTLS, since STARTTLS is required to achieve SSL/TLS encryption. Learn more about the <a target="_blank" href="{link}">StartTLS service</a>.<br>2. Select the SASL encryption service instead of the SSL/TLS encryption service in <b>LDAP encryption</b> settings."
action_check_winbind_domainfiles_fail	=	"The configuration files of the domain service may have been lost or modified. Select and <b>apply</b> the following option to modify the files."
action_check_winbind_fail	=	"Please contact <a class="link-font" target="_blank" href="https://www.synology.com/company/contact_us">Synology Technical Support</a>."
action_dc_is_rodc	=	"If you did not expect to join the domain through this RODC, please enter the IP address of an RWDC to continue the wizard."
action_dc_no_response	=	"The following domain controller is not responding: {ips}<br>Please try one of the following operations:<br>1. Check if all the domain information was entered correctly (e.g., the IP address of DNS server).<br>2. Specify the IP address of a domain controller (DC IP) that has a proper network connection."
action_dns_no_ip_record	=	"Please go to your DNS server [{dns}] and create the absent A/AAAA records.<br>Note: Once you complete the configuration, click the Check Again button to resume checking."
action_dns_resolve_fail	=	"Please specify the IP address of the DNS server or check if the DNS server is connectable."
action_domain_access_denied	=	"Please go to the domain controllers and ensure the following:<br>1. The SMB service is working properly.<br>2. The account has sufficient permissions to domain services."
action_domain_bad_auth_info	=	"Please check if your username and password are correct and enter them again in the following fields. If the problem persists, please check if all the domain controllers are in sync."
action_domain_ip_conflict	=	"Please follow the steps:<br>1. Check if any devices currently running on the local network are using the IP addresses listed below.<br>2. Modify the IP addresses of either the domain controllers or the devices.<br>3. Click the Check Again button to resume checking.<br>The duplicate IP addresses:{conflict_ip}"
action_domain_machine_name_conflict	=	"Please go to a domain controller and do either of the following:<br>1. Make sure that the name and sAMAccountName of _DISKSTATION_'s machine account are consistent. For example, if the account name is "ABC", the sAMAccountName should be "ABC$".<br>2. Delete the existing machine account.<br>Note: Once you complete the configuration, click the Check Again button to resume checking."
action_domain_time_not_sync	=	"Please check the time syncing issue on the domain controllers listed below, or synchronize their time manually.<br>Note: Once you complete the configuration, click the Check Again button to resume checking.{ips}"
action_duplicate_spn	=	"Please remove the duplicate SPNs in the trusted domains listed below:<br>{duplicate_spn_domain}"
action_duplicate_spn_hostfqdn	=	"Please remove this duplicate SPN from the domain: <br>{duplicate_spn_fqdn}"
action_enable_setting	=	"Please enable the following option to fix the issue."
action_get_machine_account_fail	=	"Please go to the domain controller [{connected_dc}] and try the following operations:<br>1. Check if there is a machine account named [{hostname}] in the domain controller. This account should be created under the <b>Computer</b> OU by default.<br>2. Check if the machine account [{hostname}] has permission to obtain objects under the container to which it belongs.<br>3. Go to <b>Domain/LDAP</b> > <b>Domain User</b> and click <b>Sync Domain Data</b>. If the objects of [{hostname}] still cannot be found in the domain controller [{connected_dc}] after you have confirmed that the domain information has been synced, leave and rejoin the domain."
action_inconsistent_mtu_value	=	"Please follow the steps:<br>1. Go to the devices (e.g., routers or switches) deployed in the network topology between the following domain controllers and this _DISKSTATION_.<br>2. Set the MTU value of each device to the current minimum one among all the devices.<br>3. Click the Check Again button to resume checking.{inconsistent_mtu_ip}"
action_insufficient_authorization	=	"Please try one of the following operations:<br>1. Join the domain through the domain's administrator account or a user account with sufficient privileges. Please enter the account and password in the following fields.<br>2. Delegate privileges to the user account according to <a target="_blank" href="{link}">this article</a> on Microsoft TechNet.<br>3. Go to a domain controller to check if any duplicate machine account exists and delete it."
action_kdc_unreach	=	"1. Please check the status of the KDC or reassign the DC IP.<br>2. Please ensure that the MTU value of the _DISKSTATION_ is equal to or smaller than the MTU value of the KDC. If there are other devices (e.g., routers and switches) connected between the KDC and this _DISKSTATION_, please ensure that the MTU value of the _DISKSTATION_ is also equal to or smaller than each of the MTU values of these devices."
action_kerberos_too_much_diff_time	=	"Please go to Control Panel > Regional Options > Time on this _DISKSTATION_, and try one of the following operations:<br>1. Sync the time of this _DISKSTATION_ with the domain controllers.<br>2. Assign a domain controller as the NTP server of this _DISKSTATION_."
action_ldap_bad_data	=	"Please modify the following information on the LDAP server:{list}"
action_ldap_group_duplicated_id_number	=	"The ID number of the following LDAP group overlaps with that of a local group:{list}"
action_ldap_group_duplicated_id_numbers	=	"The ID numbers of the following LDAP groups overlap with those of local groups:{list}"
action_ldap_need_tls	=	"Please select one of the following encryption methods to transfer data. If your LDAP server requires an encrypted channel, please select SSL/TLS."
action_ldap_server_port_invalid	=	"Please try either of the following operations:<br>1. Make sure ports {port} are not blocked by firewalls on any devices (e.g., routers or gateways) in the network topology between this _DISKSTATION_ and LDAP servers. The following are the unreachable LDAP servers:{server_list}2. Delete redundant AAAA records in the DNS server."
action_ldap_user_duplicated_id_number	=	"The ID number of the following LDAP user overlaps with that of a local user:{list}"
action_ldap_user_duplicated_id_numbers	=	"The ID numbers of the following LDAP users overlap with those of local users:{list}"
action_local_access_denied	=	"The Remote Procedure Call (RPC) connection between the _DISKSTATION_ and the domain controller may be lost. Please try one of the following operations:<br>1. Check the logs on the domain controller for any related connection error, and then identify the service status of the domain controller using related diagnostic tools.<br>2. Specify a connected Domain Controller IP address (DC IP) to ensure proper authentication behavior."
action_machine_account_conflict	=	"Please refer to <a target="_blank" href="{link}">this article</a> for detailed instructions on how to resolve conflicts of domain accounts."
action_machine_logon_fail	=	"Please do one of the following:<br>1. Go to a domain controller. Check if the machine account and password of this _DISKSTATION_ are properly configured.<br>2. Go to Domain/LDAP > Edit > General and click Rejoin Domain.<br>3. Specify the IP address of the domain controller (DC IP) that has a proper network connection."
action_machine_max_limit	=	"Join the domain through the domain's administrator account or a user account with sufficient privileges. Please enter the account and password in the following fields."
action_machine_password_not_sync	=	"Please check the replication status of the domain controller [{ip}] using Active Directory Replication Status Tool. You can refer to <a target="_blank" href="{link}">this article</a> for detailed instructions on how to use this tool.<br>Note: Once you complete the configuration, click the Check Again button to resume checking."
action_multiple_ports_invalid	=	"Please try one of the following operations:<br>1. Make sure ports {port} are not blocked by firewalls on any devices (e.g., routers or gateways) in the network topology between this _DISKSTATION_ and domain controllers. The following are the unreachable domain controllers:{server_list}2. Delete redundant AAAA records in the DNS server if you are not using IPv6.<br>3. Specify the IP address of the domain controller (DC IP) that has a proper network connection."
action_nas_hostname_conflict	=	"Please check if the device [{conflict_ip}] is still running. If yes, please change the hostname of either this _DISKSTATION_ [{local_ip}] or the conflicted device [{conflict_ip}].<br>Note: The device will automatically leave the domain once you change its hostname."
action_nas_ip_conflict	=	"Please try one of the following operations:<br>1. Check if any device on the local network has the same IP address as this _DISKSTATION_.<br>2. Modify the IP address of this _DISKSTATION_.<br>Note: Once you complete the configuration, click the Check Again button to resume checking."
action_no_srv_record	=	"Please go to your DNS server [{dns}] and create the absent SRV records according to <a href="{link}">the SRV Resource Records</a> page on Microsoft Docs.<br>Note: Once you complete the configuration, click the Check Again button to resume checking.<br>The absent SRV records:{absent_srv_record}"
action_ntlm_access_fail	=	"Please try one of the following operations:<br>1. Use Active Directory Replication Status Tool to check the status of replication among the domain controllers. Please refer to <a target="_blank" href="{link}">this article</a> to learn how to use Active Directory Replication Status Tool.<br>2. Specify the IP address of the domain controller (DC IP) that has a proper network connection."
action_ntlm_account_not_exist	=	"Please add this domain account to the <b>Allowed RODC Password Replication Group</b>, so that this account can be replicated to the connected RODC.<br>Note: Once you complete the configuration, click the Check Again button to resume checking."
action_ntlm_account_restriction	=	"You can skip this issue if you want to ensure account security and avoid using NTLM authentication on this _DISKSTATION_. However, if you want to prevent compatibility issues of NTLM, please remove this account from the Protected Users group."
action_ntlm_service_disable	=	"Please enable NTLM in the GPOs listed below by following the instructions in these articles related to NTLM restriction:<br><a target="_blank" href="{link_server_exception}">1. Add server exceptions in this domain</a><br><a target="_blank" href="{link_ntlm_traffic}">2. Incoming NTLM traffic</a><br><a target="_blank" href="{link_ntlm_auth}">3. NTLM authentication in this domain</a><br><br>Note: Once you complete the configuration, click the Check Again button to resume checking.{gpo_list}"
action_password_expired	=	"Please update the password of the current account, or use another account to continue the wizard."
action_plural_check_cldap_fail	=	"The CLDAP service is unavailable on the following domain controllers: {ips}. Please try one of the following operations:<br>1. Specify the correct IP addresses of the domain controllers.<br>2. Confirm that port 389 is not blocked by a firewall of any devices, such as a router or a gateway, in the network topology between this _DISKSTATION_ and the domain controllers.<br>Learn more about the <a target="_blank" href="{link}">CLDAP service</a>."
action_plural_dc_no_response	=	"The following domain controllers are not responding: {ips}<br>Please try one of the following operations:<br>1. Check if all the domain information was entered correctly (e.g., the IP address of DNS server).<br>2. Specify the IP address of a domain controller (DC IP) that has a proper network connection."
action_plural_machine_password_not_sync	=	"Please check the replication status of the following domain controllers using Active Directory Replication Status Tool. You can refer to <a target="_blank" href="{link}">this article</a> for detailed instructions on how to use this tool.<br>Note: Once you complete the configuration, click the Check Again button to resume checking.{ips}"
action_rejoin_domain	=	"Please rejoin domain to resolve this issue. You can enter the domain account and password you used before in the following fields, and click the Apply button to join the domain again."
action_resolve_fqdn_fail	=	"Please do either of the following:<br>1. Click Edit > General at the Domain/LDAP tab. Make sure the content in the DC IP/FQDN field is correct.<br>2. Check if the DNS records of the following FQDN are properly configured:<br>{unresolved_fqdn}"
action_resolve_fqdns_fail	=	"Please do either of the following:<br>1. Click Edit > General at the Domain/LDAP tab. Make sure the content in the DC IP/FQDN field is correct.<br>2. Check if the DNS records of the following FQDNs are properly configured:<br>{unresolved_fqdn}"
action_restart_synoad_pkg	=	"Please follow the instructions below to restart the Synology Directory Server package on this _DISKSTATION_.<br>1. Go to Package Center > Synology Directory Server.<br>2. Click Stop.<br>3. Click Run."
action_service_not_enable	=	"Please try one of the following operations:<br>1. Activate the {service} service on the following domain controllers: {domain_server}2. Specify the IP address of the domain controller (DC IP) that has a proper network connection."
action_single_port_invalid	=	"Please try one of the following operations:<br>1. Make sure port {port} is not blocked by firewalls on any devices (e.g., routers or gateways) in the network topology between this _DISKSTATION_ and domain controllers. The following are the unreachable domain controllers:{server_list}2. Delete redundant AAAA records in the DNS server if you are not using IPv6.<br>3. Specify the IP address of the domain controller (DC IP) that has a proper network connection."
action_smb_conf_bad_value	=	"Please reset {badValue} in smb.conf on this _DISKSTATION_ to its default value.<br>Note: Once you complete the configuration, click the Check Again button to resume checking."
action_smb_conf_bad_values	=	"Please reset {badValue} in smb.conf on this _DISKSTATION_ to its default value.<br>Note: Once you complete the configuration, click the Check Again button to resume checking."
action_smb_ldap_auth_fail	=	"Please check and enter your domain account and password again for authentication."
action_smb_unsuccessful	=	"Please do the following:<br>Check if there are other issues shown in the wizard. If yes, try solving those issues first.<br>2. Go to Control Panel > File Services > SMB > Advanced Settings, and click Clear SMB Cache.<br>3. Make sure the domain controllers are working properly.<br>Note: Once you complete the configuration, click the Check Again button to resume checking."
action_srv_no_address_record	=	"Please go to the DNS server [{dns}] and create A/AAAA records for each of the following SRV records.<br>Note: Once you complete the configuration, click the Check Again button to resume checking.{unresolve_srv_target}"
action_suggest_enable_local_smb	=	"To test SMB connection, please enable SMB service on this _DISKSTATION_:<br>1. Go to Control Panel > File Services > SMB > SMB Settings.<br>2. Select Enable SMB service."
action_unknown_and_retry	=	"Please try solving other issues first, and click Check Again to resume checking."
action_workgroup_conflict	=	"Please change this _DISKSTATION_'s hostname and join the domain again."
all_pass	=	"Passed"
already_in_directory_service	=	"This _DISKSTATION_ has already joined the domain/LDAP."
auth_test	=	"Checking authentication information..."
auto_detect_server_type_fail	=	"Unable to detect the server type through the server address. Please select the correct server type from the drop-down menu."
automatic	=	"Automatic"
basic_info	=	"Basic Information"
build_database_with_membership	=	"Create an additional database to enhance the speed of domain data access for packages."
category_authentication	=	"Check authentication"
category_dns	=	"Check DNS records"
category_domain	=	"Check domain"
category_domain_service	=	"Check domain service"
category_join	=	"Join directory"
category_ldap_group	=	"Check LDAP groups"
category_ldap_service	=	"Check LDAP service"
category_ldap_user	=	"Check LDAP users"
category_network	=	"Check networking"
category_profile	=	"Check profile"
category_schema	=	"Check server schema"
category_services	=	"Check domain service"
category_validation	=	"Check domain functionality"
check_again	=	"Check Again"
check_auth_info	=	"Checking Bind DN and password..."
check_ldap_group_data	=	"Checking group information..."
check_ldap_schema	=	"Checking LDAP schema..."
check_ldap_user_data	=	"Checking user information..."
check_port	=	"Checking port..."
check_profile	=	"Checking profile..."
check_sync_status	=	"Check Sync Status"
computer_account_check	=	"Checking machine account settings..."
computer_default_container	=	"Default container"
confirm_close_domain_wizard	=	"You are about to stop the domain environment check. The functionality of domain service might be limited if you remain items unchecked or issues unsolved.<br/><br/>Are you sure you want to stop the check?"
confirm_close_ldap_wizard	=	"You are about to stop the LDAP environment check. The functionality of LDAP service might be limited if you remain items unchecked or issues unsolved.<br/><br/>Are you sure you want to stop the check?"
conn_status_header	=	"Connection Status"
convert_server_ip_fail	=	"Cannot resolve the server's IP address into the domain name. Please enter the domain name directly."
db_status	=	"Sync status"
db_status_complete	=	"Completed"
db_status_fail	=	"Failed"
db_status_syncing	=	"Syncing..."
db_status_waiting	=	"Waiting..."
detail_kdc_unreach	=	"Unable to connect to the Kerberos Key Distribution Center (KDC) for Kerberos authentication."
details_absent_srv_record	=	"Some essential SRV records are missing in the DNS server [{dns}]."
details_account_lockout	=	"The account you entered cannot be used to join the domain because it might have been deactivated, locked out, or expired."
details_bad_auth_info	=	"Unable to retrieve LDAP server data due to authentication failure. This may be caused by an incorrect Bind DN, Bind DN format, password, or a certificate issue."
details_bad_profile	=	"Unable to find valid data through the profile attributes. This may cause failures to get user information from the server."
details_can_not_find_any_dc	=	"Cannot find any domain controllers through the current configurations."
details_check_cldap_fail	=	"Unable to get the information of the domain controller via the CLDAP service. This is possibly because the IP address of the domain controller is incorrect, or the CLDAP service is unavailable on the domain controller."
details_check_gpo_fail	=	"This _DISKSTATION_ is unable to access domain data because of <b>Default Domain Controllers Policy</b>."
details_check_spn_fail	=	"Unable to set SPNs for the machine account of this _DISKSTATION_. This issue may cause failures of Kerberos authentication. For instance, authentication might fail when users connect to the _DISKSTATION_ through SMB."
details_check_tls_fail	=	"Unable to authenticate through the SSL/TLS encryption service. This is possibly because the settings of the SSL/TLS encryption service on the domain controller is not configured correctly."
details_check_winbind_domainfiles_fail	=	"The configuration files of the domain service are abnormal. As a result, this device may not be able to sign in as a domain user or obtain user information from the server."
details_check_winbind_fail	=	"Domain services on this _DISKSTATION_ cannot work properly."
details_dc_is_rodc	=	"The nearest domain controller is an RODC (read-only domain controller). Joining domain through RODC carries a high risk of failure as this method have multiple requirements, such as pre-creating the machine account of _DISKSTATION_ through an RWDC (read/write domain controller), and using a domain account with sufficient privileges."
details_dc_no_response	=	"A domain controller is not responding."
details_dns_no_ip_record	=	"All essential A/AAAA records are missing in the DNS server [{dns}]."
details_dns_port_invalid	=	"The DNS port (53) is unreachable. The connection may have been blocked by firewalls on one or multiple devices (e.g., routers or gateways) in the network topology between this _DISKSTATION_ and domain controllers."
details_dns_resolve_fail	=	"The DNS server [{dns}] cannot resolve the domain name [{domain_name}]."
details_domain_access_denied_machine	=	"Unable to access the domain services using this _DISKSTATION_'s machine account."
details_domain_access_denied_user	=	"Unable to access domain services using the specified domain account."
details_domain_bad_auth_info	=	"Your username or password is incorrect."
details_domain_ip_conflict	=	"Several IP conflicts between devices on the local network and domain controllers occurred. This may result in connection failure between this _DISKSTATION_ and domain controllers."
details_domain_machine_name_conflict	=	"The _DISKSTATION_ already has a machine account in the domain, and the account name is not consistent with its sAMAccountName."
details_domain_time_not_sync	=	"The time is not in sync on domain controllers. This may result in abnormal domain service in the future."
details_duplicate_spn	=	"One or more duplicate Service Principal Names (SPNs) registered under this machine account are found in some trusted domains. This may cause authentication issues during cross-forest authentication."
details_get_machine_account_fail	=	"Unable to get information for this _DISKSTATION_ from the domain controller, possibly because the information has not been synced to this domain controller yet."
details_inconsistent_mtu_value	=	"One or more devices (e.g., routers or switches) in the network topology between this _DISKSTATION_ and the domain controllers have incorrect MTU settings."
details_insufficient_authorization	=	"The privileges of the domain user [{username}] are insufficient to create or modify the machine account for this _DISKSTATION_."
details_kerb_port_invalid	=	"The Kerberos port (88) is unreachable. The connection may have been blocked by firewalls on one or multiple devices (e.g., routers or gateways) in the network topology between this _DISKSTATION_ and domain controllers."
details_kerberos_too_much_diff_time	=	"The time difference between this _DISKSTATION_ and the domain controllers is too great. This may cause Kerberos authentication failures."
details_ldap_dont_support_samba_schema	=	"The LDAP server does not support Samba schema"
details_ldap_group_id_bad_type	=	"Some group ID numbers contain non-numeric characters (0 - 9) and will not be listed on this _DISKSTATION_ accordingly."
details_ldap_group_id_duplicated	=	"Some group ID numbers in the LDAP directory overlap with those of local groups. If you wish to skip this issue and continue the wizard, the permissions to the local groups will be automatically applied to the LDAP groups that have the same group ID numbers."
details_ldap_group_id_empty	=	"Some group ID numbers are left blank and will not be listed on this _DISKSTATION_ accordingly."
details_ldap_group_name_duplicated	=	"Some group names in the LDAP directory overlap with those of local groups. This may cause potential system abnormalities."
details_ldap_group_name_empty	=	"Some group names are left blank and will not be listed on this _DISKSTATION_ accordingly."
details_ldap_need_tls	=	"The LDAP server requires an encrypted connection to transfer the data."
details_ldap_port_invalid	=	"The LDAP port (389 or 636) is unreachable. The connection may have been blocked by firewalls on one or multiple devices (e.g., routers or gateways) in the network topology between this _DISKSTATION_ and domain controllers."
details_ldap_user_id_bad_type	=	"Some user ID numbers contain non-numeric characters (0 - 9) and will not be listed on this _DISKSTATION_ accordingly."
details_ldap_user_id_duplicated	=	"Some user ID numbers in the LDAP directory overlap with those of local users. If you wish to skip this issue and continue the wizard, the permissions to the local users will be automatically applied to the LDAP users that have the same user ID numbers."
details_ldap_user_id_empty	=	"Some user ID numbers are left blank and will not be listed on this _DISKSTATION_ accordingly."
details_ldap_user_lost_ntpassword	=	"Some users lack the sambaNTPassword attribute. This may cause abnormalities of SMB service."
details_ldap_user_name_duplicated	=	"Some user names in the LDAP directory overlap with those of local users. Under this circumstance, LDAP users can only sign in to this _DISKSTATION_ with their UPNs (User Principal Names), such as <i>user1@example.com<i>."
details_ldap_user_name_empty	=	"Some user names are left blank and will not be listed on this _DISKSTATION_ accordingly."
details_local_access_denied	=	"Unable to access local services using this _DISKSTATION_'s machine account."
details_local_smb_conn_refused	=	"This _DISKSTATION_ cannot connect to the Synology Directory Server. Possible reason: the Synology Directory Server package isn't operating correctly."
details_machine_account_conflict	=	"The machine account of this _DISKSTATION_ conflicted with a machine account [{hostname}] in the domain."
details_machine_logon_fail	=	"Cannot sign in to the domain service because the machine account or password of this _DISKSTATION_ is incorrect."
details_machine_max_limit	=	"Your domain account reached the maximum number of devices it can join to the domain."
details_machine_password_expired	=	"The machine account password of this _DISKSTATION_ expired."
details_machine_password_not_sync	=	"Cannot find the machine account of this _DISKSTATION_ on a domain controller because their databases are not in sync. This may cause abnormalities of domain services."
details_multiple_ports_invalid	=	"The {service} ports ({port}) are unreachable. The connection may have been blocked by firewalls on one or multiple devices in the network topology."
details_nas_hostname_conflict	=	"This device's hostname conflicted with an existing device in the domain. If you continue joining the domain, the device [{conflict_ip}] with the same hostname will be removed from the domain."
details_nas_ip_conflict	=	"An IP conflict between this _DISKSTATION_ and another device occurred. This may cause connection failures between this _DISKSTATION_ and domain controllers."
details_netbios_port_invalid	=	"The NetBIOS port (137, 138) is unreachable. The connection may have been blocked by firewalls on one or multiple devices (e.g., routers or gateways) in the network topology between this _DISKSTATION_ and domain controllers."
details_no_ns_record	=	"The DNS server is invalid."
details_no_srv_record	=	"All essential SRV records are missing in the DNS server [{dns}]."
details_ntlm_access_fail	=	"An error occurred during the access to domain controllers. This may cause NTLM authentication failures."
details_ntlm_account_not_exist	=	"The domain account of this _DISKSTATION_ does not exist in the connected read-only domain controller (RODC)."
details_ntlm_account_restriction	=	"This account is in the Protected Users group. Members of this group cannot authenticate through NTLM as they are protected only through an advanced authentication."
details_ntlm_service_disable	=	"The NTLM service is disabled. This may result from multiple settings of GPOs (Group Policy Objects)."
details_password_expired	=	"Unable to access the domain service because the password of your domain account has expired."
details_plural_check_cldap_fail	=	"Unable to get the information of the domain controllers via the CLDAP service. This is possibly because the IP addresses of the domain controllers are incorrect, or the CLDAP service is unavailable on the domain controllers."
details_plural_dc_no_response	=	"Domain controllers are not responding."
details_plural_machine_password_not_sync	=	"Cannot find the machine account of this _DISKSTATION_ on certain domain controllers because their databases are not in sync. This may cause abnormalities of domain services."
details_remote_smb_conn_refused	=	"The domain controller cannot connect to this _DISKSTATION_, which will cause the authentication to fail on this _DISKSTATION_."
details_resolve_fqdn_fail	=	"Unable to resolve the FQDN of a domain controller. This issue might cause an unstable domain service."
details_resolve_fqdns_fail	=	"Unable to resolve the FQDNs of domain controllers. This issue might cause an unstable domain service."
details_server_disconnected	=	"The connection between this _DISKSTATION_ and the domain controller is lost, which will cause the authentication to fail on this _DISKSTATION_."
details_service_not_enable_all	=	"Detected that the {service} service are disabled on all domain controllers."
details_service_not_enable_partial	=	"Detected that the {service} service are disabled on some domain controllers. This may cause service failures."
details_single_port_invalid	=	"The {service} port ({port}) is unreachable. The connection may have been blocked by firewalls on one or multiple devices in the network topology."
details_smb_conf_bad_value	=	"The value of {badValue} in smb.conf was modified."
details_smb_conf_bad_values	=	"The values of {badValue} in smb.conf were modified."
details_smb_ldap_auth_fail	=	"{auth_method} authentication failed. Your domain account or password is incorrect."
details_smb_port_invalid	=	"The SMB port (445) is unreachable. The connection may have been blocked by firewalls on one or multiple devices (e.g., routers or gateways) in the network topology between this _DISKSTATION_ and domain controllers."
details_smb_unsuccessful	=	"Unable to access the domain services. This may result from cache on this _DISKSTATION_ or malfunctioning domain controllers."
details_srv_no_address_record	=	"The SRV records have no corresponding A/AAAA records on the DNS server [{dns}]."
details_suggest_enable_local_smb	=	"Unable to access the SMB service on this _DISKSTATION_."
details_title	=	"Issue Details"
details_unknown_and_retry	=	"Unable to conduct the test, possibly because the network connection is unstable or the system is busy."
details_workgroup_conflict	=	"This _DISKSTATION_'s hostname conflicts with the workgroup name (i.e., NetBIOS name) of the domain. This may cause abnormalities of domain services."
directory_service_desc	=	"Join an existing LDAP or domain and manage directory settings."
directory_service_title	=	"Domain/LDAP"
distinguish_name	=	"Distinguished name (DN)"
dns_check_pass	=	"All DNS records are correct"
dns_server	=	"DNS server"
dns_valid_check	=	"Checking DNS settings and records..."
domain_account	=	"Domain account"
domain_check_join_title	=	"Check and join the domain"
domain_check_pass	=	"Domain settings are normal"
domain_enable	=	"Enabling domain service..."
domain_group_tab	=	"Domain Group"
domain_info_title	=	"Enter domain information"
domain_join	=	"Joining domain..."
domain_kdc_ip_rule	=	"DC IP/FQDN Rule"
domain_manage_mode	=	"Management mode"
domain_mgmt_sync_fail_tooltip	=	"Please click <b>Test</b> to run a precondition check."
domain_ou_mode	=	"Single domain with OUs"
domain_ou_title	=	"Specify an OU to join"
domain_primary_sync_fail_tooltip	=	"Please go to Control Panel > Domain/LDAP > Domain/LDAP and click <b>Test</b> to run a precondition check."
domain_status_sync_fail_tooltip	=	"Please go to Control Panel > Domain/LDAP > Domain/LDAP > Settings > Management Mode, select this domain, and click <b>Test</b> to run a precondition check."
domain_sync_check	=	"Checking domain replication status..."
domain_sync_status	=	"Domain Sync Status"
domain_update_period	=	"Update user/group list"
domain_user_tab	=	"Domain User"
domainou_list_all_items	=	"All"
edit_trust_dc	=	"Set DC IP"
enable_domain	=	"Join domain"
enabled	=	"Enabled"
env_setting_test	=	"Check client environment"
env_settings_check	=	"Checking environment settings..."
expand_nested_groups	=	"Expand nested groups"
feasibility_check_db_path	=	"Domain/LDAP: This service will be temporarily deactivated."
fix	=	"Details"
get_ou_warning_content	=	"The computer account will be temporarily registered to the default OU on the next page. If your account, password, and domain details are correct, continue joining the domain to troubleshoot the issue."
get_ou_warning_title	=	"Unable to retrieve domain data"
hostname_conflict_check	=	"Checking hostnames in the domain..."
ignore_issue	=	"Skip Anyway"
ip_conflict_check	=	"Checking IP settings in the local network..."
issue_title_absent_srv_record	=	"Missed some essential SRV records"
issue_title_account_lockout	=	"Unable to use this account"
issue_title_bad_auth_info	=	"Incorrect authentication information"
issue_title_bad_group_profile	=	"Incorrect group profile"
issue_title_bad_user_profile	=	"Incorrect user profile"
issue_title_can_not_find_any_dc	=	"Cannot find any domain controllers"
issue_title_check_cldap_fail	=	"Unable to get information via CLDAP"
issue_title_check_gpo_fail	=	"Access denied by certain group policy settings"
issue_title_check_spn_fail	=	"Unable to set SPNs for the machine account of this _DISKSTATION_"
issue_title_check_tls_fail	=	"Unable to authenticate through SSL/TLS"
issue_title_check_winbind_domainfiles_fail	=	"Configuration files of domain service are abnormal"
issue_title_check_winbind_fail	=	"Domain services cannot work properly"
issue_title_connection_refused	=	"Connection failed"
issue_title_dc_is_rodc	=	"Joining a domain through an RODC may not be successful"
issue_title_dc_no_response	=	"No response from a domain controller"
issue_title_dns_no_ip_record	=	"A/AAAA records are missing"
issue_title_dns_port_invalid	=	"Unreachable DNS port"
issue_title_dns_resolve_fail	=	"Unable to resolve the domain name"
issue_title_domain_access_denied	=	"Unable to access domain services"
issue_title_domain_bad_auth_info	=	"Incorrect username or password"
issue_title_domain_ip_conflict	=	"IP conflicts with domain controllers"
issue_title_domain_machine_name_conflict	=	"The machine account already exists and encountered an error"
issue_title_domain_time_not_sync	=	"The time is not in sync on domain controllers"
issue_title_duplicate_spn	=	"Duplicate SPNs already exist"
issue_title_get_machine_account_fail	=	"_DISKSTATION_ information may not have been synced to the domain controller"
issue_title_inconsistent_mtu_value	=	"Incorrect MTU settings"
issue_title_insufficient_authorization	=	"Insufficient privileges of the domain user"
issue_title_kdc_unreach	=	"Unable to connect to the Kerberos Key Distribution Center (KDC)"
issue_title_kerb_port_invalid	=	"Unreachable Kerberos port"
issue_title_kerberos_too_much_diff_time	=	"The time difference between this _DISKSTATION_ and domain controllers is too great"
issue_title_ldap_group_id_duplicated	=	"Group ID numbers already exist on this _DISKSTATION_"
issue_title_ldap_group_id_invalid	=	"Invalid group ID numbers"
issue_title_ldap_group_name_duplicated	=	"Group names already exist on this _DISKSTATION_"
issue_title_ldap_group_name_invalid	=	"Invalid group names"
issue_title_ldap_need_tls	=	"Encrypted connection needed"
issue_title_ldap_port_invalid	=	"Unreachable LDAP port"
issue_title_ldap_user_id_duplicated	=	"User ID numbers already exist on this _DISKSTATION_"
issue_title_ldap_user_id_invalid	=	"Invalid user ID numbers"
issue_title_ldap_user_name_duplicated	=	"User names already exist on this _DISKSTATION_"
issue_title_ldap_user_name_invalid	=	"Invalid user names"
issue_title_local_access_denied	=	"Unable to access local services"
issue_title_machine_account_conflict	=	"Conflict of machine account"
issue_title_machine_logon_fail	=	"Cannot sign in to domain with machine account"
issue_title_machine_max_limit	=	"Reached the maximum number of devices your account can join to the domain"
issue_title_machine_password_expired	=	"Machine account password expired"
issue_title_machine_password_not_sync	=	"Cannot find the machine account of this _DISKSTATION_ on a domain controller"
issue_title_multiple_ports_invalid	=	"Unreachable {service} ports"
issue_title_nas_hostname_conflict	=	"This device's hostname already exists in the domain"
issue_title_nas_ip_conflict	=	"The IP address of this _DISKSTATION_ conflicts with another device"
issue_title_no_ns_record	=	"Invalid DNS server"
issue_title_no_ntpassword	=	"Lack of the sambaNTPassword attribute"
issue_title_no_samba_schema	=	"Samba schema is not supported"
issue_title_no_srv_record	=	"Missed all essential SRV records"
issue_title_ntlm_access_fail	=	"An error occurred during the access to domain controllers"
issue_title_ntlm_account_not_exist	=	"Cannot find this device's domain account on the connected RODC"
issue_title_ntlm_account_restriction	=	"The domain account belongs to the Protected Users group"
issue_title_ntlm_service_disable	=	"NTLM service disabled"
issue_title_password_expired	=	"Password of your domain account has expired"
issue_title_plural_check_cldap_fail	=	"Unable to get information via CLDAP"
issue_title_plural_dc_no_response	=	"No response from domain controllers"
issue_title_plural_machine_password_not_sync	=	"Cannot find the machine account of this _DISKSTATION_ on some domain controllers"
issue_title_resolve_fqdn_fail	=	"Unable to resolve FQDN"
issue_title_resolve_fqdns_fail	=	"Unable to resolve FQDNs"
issue_title_server_disconnected	=	"Server disconnected"
issue_title_service_not_enable_all	=	"The {service} service is not enabled on all domain controllers"
issue_title_service_not_enable_partial	=	"The {service} service is not enabled on some domain controllers"
issue_title_single_port_invalid	=	"Unreachable {service} port"
issue_title_smb_conf_bad_value	=	"The smb.conf was modified"
issue_title_smb_ldap_krb5_auth_fail	=	"Kerberos authentication failed. Incorrect account or password"
issue_title_smb_ldap_ntml_auth_fail	=	"NTLM authentication failed. Incorrect account or password"
issue_title_smb_port_invalid	=	"Unreachable SMB port"
issue_title_smb_unsuccessful	=	"Unable to access domain services"
issue_title_srv_no_address_record	=	"Cannot find the corresponding A/AAAA records of SRV records"
issue_title_suggest_enable_local_smb	=	"Unable to test SMB connection"
issue_title_unknown_and_retry	=	"Unable to conduct the test"
issue_title_workgroup_conflict	=	"The device hostname is not permitted"
join	=	"Join"
join_password	=	"Domain password"
join_process_exist	=	"The user [{user}] from [{IP}] also launched the domain/LDAP joining wizard on this _DISKSTATION_, but the operation has been paused awhile. Are you sure you want to stop {user}'s operation and continue?"
join_process_interrupt	=	"The operation was interrupted by the user [{user}] from [{IP}]. Please try again later."
join_process_is_running	=	"The user [{user}] from [{IP}] is also joining this _DISKSTATION_ to the domain/LDAP. Please try again later."
join_progress_not_exist	=	"The operation was interrupted."
join_success	=	"Successfully joined as a directory client"
last_sync_time	=	"Last synced"
last_test_time	=	"Last tested"
ldap_check_join_title	=	"Check and join the LDAP directory"
ldap_client	=	"LDAP Client"
ldap_group_tab	=	"LDAP Group"
ldap_info_title	=	"Enter LDAP information"
ldap_join	=	"Joining LDAP directory..."
ldap_smb_kerberos_port_check	=	"Checking LDAP, SMB, and Kerberos ports..."
ldap_user_tab	=	"LDAP User"
leave	=	"Leave Domain/LDAP"
leave_confirm	=	"I have read the notification and still want to leave the domain/LDAP"
leave_domain	=	"Leave Domain"
leave_ldap	=	"Leave LDAP"
leave_warn	=	"Leaving the domain/LDAP may affect certain functions of this _DISKSTATION_ and packages, e.g., MailPlus Server. Are you sure you want to leave?"
local_smb_service_check	=	"Checking local SMB service..."
mtu_check	=	"Checking MTU..."
multi_critical_issues	=	"{0} critical issues detected. Please click the Details button to troubleshoot them before proceeding"
multi_critical_issues_short	=	"{0} critical issues detected"
multi_minor_issues	=	"Complete. {0} minor issues detected. Please click the Details button to view information first, and continue the wizard"
multi_minor_issues_short	=	"Complete. {0} minor issues detected"
nested_groups_level	=	"Nested group levels"
network_check_pass	=	"Network settings are normal"
no_retest_confirm_again	=	"Do not show this message again during the test."
notice_join_directory	=	"Please click Join to set up your domain/LDAP client"
organizational_unit	=	"OU"
ou_auto_sync	=	"Automatically sync domain changes (including new OUs)"
ou_auto_sync_tips	=	"Only select all OUs could sync newly added OUs under the domain in the future"
ou_default_object_tips	=	"Some built-in domain groups, such as Domain Users, Administrators, Domain Admins, and Enterprise Admins, will be synced by default to your _OSNAME_."
ou_selector_note	=	"Note: Objects in the default container (e.g., Users) will be automatically included, such as administrator, Domain Admins, Enterprise Admins, and Domain Users."
ou_warn_partial_content	=	"To change the synced OUs later, you'll need to leave and rejoin the domain, which may affect some features and packages on the system."
ou_warn_partial_title	=	"Important Notice"
preprocess	=	"Preparing..."
recommended_action_title	=	"Recommended Action"
remove_winbind_files	=	"Modify the abnormal configuration files"
retest_confirm	=	"The test will be run again if you apply this setting. Are you sure you want to continue?"
retry_fail	=	"Unable to pass the test. Please make sure the configurations are correct."
save_profile	=	"Saving the profile..."
search_ou_placeholder	=	"Search"
select_trust	=	"All"
selected_ou_cannot_modify_tip	=	"To change the synced OUs later, you'll need to leave and rejoin the domain, which may affect some features and packages on the system."
server_address	=	"Server address"
server_setting_title	=	"Enter server information"
server_testing	=	"Test"
server_type	=	"Server type"
server_type_auto	=	"Auto-detect"
service_enable_check	=	"Checking required services..."
services_check_pass	=	"All domain services are working properly"
single_critical_issue	=	"1 critical issue detected. Please click the Detail button to troubleshoot it before proceeding"
single_critical_issue_short	=	"1 critical issue detected"
single_minor_issue	=	"Complete. 1 minor issue detected. Please click the Detail button to view information first, and continue the wizard"
single_minor_issue_short	=	"Complete. 1 minor issue detected"
specify_ou	=	"Register machine account in"
status_checking	=	"Checking..."
status_waiting	=	"Waiting..."
staus_bar_domain_complete	=	"{domain} is completely synced."
staus_bar_domain_fail	=	"{domain} syncing failed."
staus_bar_domain_syncing	=	"Syncing {domain}..."
suggest_schedule_content	=	"To ensure the user/group list stays up-to-date, please go to Settings > General > Update user/group list to set the update frequency"
suggest_schedule_title	=	"Suggested setting up a schedule update"
sync	=	"Sync"
sync_data_btn	=	"Sync Data"
sync_domain_confirm_desc	=	"By proceeding, all the data on the domain controller will be synced. The time of the sync process may differ depending on the amount of data, and this process may affect the performance of your NAS. You can check the sync status on the status bar."
sync_domain_confirm_title	=	"Sync {domain} Data"
trust_domain_mode	=	"Trusted domains"
unselect_domain_confirm	=	"Deselecting the following domains will also delete all the data associated with the domains. Are you sure you want to continue?"
update_all_domain	=	"Sync Domain Data"
validation_success	=	"All domain services are working well"
warn_delegate_user_cant_operate	=	"Only administrator accounts can perform this operation."
warr_db_not_ready	=	"Updating the domain user/group list. The time required depends on the object count to be synced from the domain server to the client. Domain operations will be available once the update is complete."
warr_enable_samba	=	"You need to enable "Windows File Service" before joining a domain. Do you want to enable the service now?"
warr_synoad_exists	=	"Failed to join the domain because Synology Directory Server already provides domain service."
winbind_check	=	"Checking local services and settings..."
wizard_mgmt_ou_content	=	"Select the OUs you want to sync data from. To change the synced OUs later, you'll need to leave and rejoin the domain, which may affect some features and packages on the system."
wizard_mgmt_ou_title	=	"Sync OUs"
wizard_optional_title	=	"Configure advanced settings"
wizard_scheduler_content	=	"You only selected specific OUs, so set up scheduled syncs to detect user and group changes. Or, manually sync regularly at <b>Domain/LDAP</b> > <b>Domain User</b> > <b>Sync</b> > <b>Sync Domain Data</b>."
wizard_scheduler_title	=	"Schedule domain syncs"
wizard_title	=	"Domain/LDAP Joining Wizard"
wizard_title_domain	=	"Domain Joining Wizard"
wizard_title_ldap	=	"LDAP Joining Wizard"

[disable_admin_notification]
enable_2fa	=	"Enable 2FA"
info_desc_create_and_disable	=	"The default account "admin" is vulnerable to brute-force attacks, which may lead to ransomware attacks. Click {0} to create another administrator account, sign in with the new account, and deactivate "admin". Some packages/services may be affected. <a class="link-font" href="https://www.synology.com/knowledgebase/DSM/tutorial/Management/services_affected_by_disable_admin" target="_blank">Learn more</a>"
info_desc_disable	=	"The default account "admin" is vulnerable to brute-force attacks, which may lead to ransomware attacks. You can secure your account with <a class="link-font" href="https://kb.synology.com/DSM/help/DSM/SecureSignIn/2factor_authentication" target="_blank">2-factor authentication</a> (2FA), though we recommend deactivating the "admin" account.<br>Learn about <a class="link-font" href="https://kb.synology.com/DSM/tutorial/services_affected_by_disable_admin" target="_blank">what packages/services may be affected</a> by deactivating the "admin" account."
info_desc_disable_by_another	=	"The default account "admin" is vulnerable to brute-force attacks, which may lead to ransomware attacks. Sign in with another administrator account and deactivate "admin". Some packages/services may be affected. <a class="link-font" href="https://www.synology.com/knowledgebase/DSM/tutorial/Management/services_affected_by_disable_admin" target="_blank">Learn more</a>"
info_ignore	=	"Don't show again"
info_title	=	"Admin Account Security"

[disable_afp_notification]
goto_afp	=	"Go to AFP Service"
info_desc_disable	=	"AFP server support was removed in macOS 11 Big Sur. For your security, we recommended disabling your AFP service and using SMB service instead.<br>You may need to reset your Mac Finder connection and Time Machine backup after replacing AFP service with SMB service. <a class="link-font" href="https://kb.synology.com/DSM/tutorial/file_protocol_AFP_not_recommended" target="_blank">Learn more</a>"
info_desc_ignore	=	"You can disable AFP service later at <b>Control Panel</b> > <b>File Services</b> > <b>AFP</b>."
info_title	=	"Security Advice"

[disk]
deactivate_disk_in_system_tip_unsafety	=	"Unable to deactivate this drive because the system RAID has reached its the maximum drive fault tolerance. Removing this drive from _DISKSTATION_ will cause the system to crash."
deactivate_disk_using_tip_not_allow	=	"Unable to deactivate this drive because it is assigned to an operation that is still in progress."

[disk_info]
alloc_role_system_installed	=	"System"
choose_axn_step_des	=	"The system detected {0} drives that are not in use and can be used for the following operations. Make sure you have inserted the required number of drives for the operation you want to perform."
choose_axn_step_des_single	=	"The system detected {0} drive that is not in use and can be used for the following operations. Make sure you have inserted the required number of drives for the operation you want to perform."
choose_axn_step_headline	=	"Choose how to use your available drives"
choose_cache_step_des	=	"You can assign SSDs to the following SSD caches. Please select an SSD cache and click Next to continue."
choose_space_step_des	=	"You can assign drives to the following storage pools. Please select a storage pool and click Next to continue."
choose_space_step_headline	=	"Assign to a storage pool"
choose_space_step_headline_add_dr	=	"Select a storage pool to add drives"
choose_space_step_headline_add_dr_shared_cache	=	"Select an SSD cache group to add drives"
choose_space_step_headline_chg_raid_typ	=	"Select a storage pool to change its RAID type"
choose_space_step_headline_chg_raid_typ_shared_cache	=	"Select an SSD cache group to change its RAID type"
choose_space_step_headline_repair_pool	=	"Select a storage pool to repair"
choose_space_step_headline_repl_dr	=	"Select a storage pool to replace drives"
choose_space_step_headline_repl_dr_shared_cache	=	"Select an SSD cache group to replace drive"
choose_space_step_headline_ssd_cache	=	"Select an SSD cache to repair"
configure_wcache	=	"Configure Write Cache"
db_updating	=	"Updating..."
deactivate	=	"Deactivate Drive"
deactivate_disk_checkbox_confirm_pool_cache	=	"I understand that the selected drive will be removed from the associated storage pool or SSD cache"
deactivate_disk_checkbox_sys_dedicated	=	"I understand that the selected drive will be removed from the system partition"
deactivate_disk_in_ssd_cache_tip_unsafety	=	"Unable to deactivate this drive because {0} has reached its maximum drive fault tolerance. Deactivating the drive will cause {0} to crash."
deactivate_disk_note_pool_cache	=	"This action will remove {0} from the system partition, associated storage pool, volume, and SSD cache."
deactivate_disk_note_pool_cache_without_sys	=	"This action will remove {0} from its associated storage pool, volume, and SSD cache."
deactivate_disk_note_space_acting	=	"{0} belongs to a storage pool or SSD cache that has a running task. If you deactivate {0}, it will be removed from the system partition and the storage space it is in. This may affect the running task."
deactivate_disk_note_space_acting_without_sys	=	"{0} belongs to a storage pool or SSD cache that has a running task. If you deactivate {0}, it will be removed from the storage space it is in. This may affect the running task."
deactivate_disk_note_sys_dedicated	=	"This action will remove {0} from the system partition."
deactivate_disk_notice_complete	=	"This drive has been deactivated. Now you can replace that drive with its drive indicator on "alert" status."
deactivate_disk_tip_deactivated	=	"This drive has been deactivated."
deactivate_disk_tip_no_need	=	"This drive is not used in any existing storage pool. You do not need to deactivate it."
deactivate_disk_tip_unsafety	=	"Unable to deactivate this drive because {0} has reached its maximum drive fault tolerance. Deactivating the drive will cause {0} to crash."
deactivate_disk_title	=	"Deactivate Drive"
detect_dr_step_des_mult	=	"System detected that you have {0} free drives, please make sure you have inserted the required drives. You can continue to insert and click Refresh to redetect available drives. If you have finished inserting, click Start to continue."
detect_dr_step_des_sgl	=	"System detected that you have {0} free drive, please make sure you have inserted the required drives. You can continue to insert and click Refresh to redetect available drives. If you have finished inserting, click Start to continue."
detect_dr_step_headline	=	"Confirm available free drives you want to assign"
disk_adv_status	=	"Advanced Health Status"
disk_adv_status_not_test	=	"Not Tested"
disk_adv_test	=	"Advanced Health Test"
disk_adv_test_action_type_all	=	"Advanced Health Test on all supported drives"
disk_adv_test_action_type_sel	=	"Advanced Health Test on selected drives"
disk_adv_test_all_support_disk	=	"Test all supported drives"
disk_adv_test_code	=	"Test output code"
disk_adv_test_desc	=	"Examine and report the status of Seagate drives to warn you about possible drive issues."
disk_adv_test_diable_desc	=	"Warning: The Advanced Health Test results indicate potential issues on this drive. Please do not use this feature unless you fully understand the indications of this value and agree to take the risk of data loss. Once the action is complete, _OSNAME_ will no longer monitor the advanced health test results."
disk_adv_test_diable_title	=	"Disable Advanced Health Test Warning"
disk_adv_test_disk_not_support	=	"Unsupported Drive"
disk_adv_test_disk_support	=	"Supported Drive"
disk_adv_test_note	=	"The Advanced Health Test can be performed only on specific Seagate HDDs. Please check the HDD/SSD information of this drive to make sure that it supports this test feature."
disk_adv_test_perform	=	"Advanced Health Test"
disk_adv_test_pre_result	=	"Last Advanced Health Test result"
disk_adv_test_processing	=	"Performing the Advanced Health Test will take a few minutes. The exact processing time may vary under different system environments."
disk_adv_test_support	=	"Advanced Health Test Support"
disk_adv_test_title	=	"List of Drive Supporting Advanced Health Test"
disk_alert_selected_disk	=	"Please note the following regarding the selected drive{0}{1}"
disk_alert_selected_disks	=	"Please note the following regarding the selected drives{0}{1}"
disk_alert_status_acceptable	=	"Not on the compatibility list"
disk_alert_status_badsector	=	"Contain bad sectors"
disk_alert_status_badsector_singular	=	"Contains bad sectors"
disk_alert_status_dsm_update	=	"_OSNAME_ update required"
disk_alert_status_fw_upgrade	=	"Firmware update required"
disk_alert_status_incompatibility	=	"Incompatible with _DISKSTATION_"
disk_alert_status_migrated	=	"Migrated from another system"
disk_alert_status_unverified	=	"Not listed on the Synology Products Compatibility List"
disk_alert_status_unverified_for_new_hcl	=	"Unverified"
disk_alert_suggest_badsector	=	"We recommend replacing drives containing bad sectors because such drives are more likely to be damaged. Important data may be lost if you choose to proceed. Are you sure you want to continue?"
disk_alert_suggest_badsector_incompatibility	=	"Using incompatible drives may affect system stability. We recommend checking the <a href="https://www.synology.com/compatibility?search_by=products&model={0}&category=hdds&p=1" target="_blank" class="link-font">Synology Products Compatibility List</a> for compatible drives. We also recommend replacing drives containing bad sectors because such drives are more likely to be damaged. Important data may be lost if you choose to proceed. Are you sure you want to continue?"
disk_alert_suggest_badsector_incompatibility_unverified	=	"Using incompatible drives or drives not on the <a href="https://www.synology.com/compatibility?search_by=products&model={0}&category=hdds&p=1" target="_blank" class="link-font">Synology Products Compatibility List</a> may affect system stability. We recommend checking the compatibility list for compatible drives or updating the drive database (at HDD/SSD > Settings) if your drives are already on the list. We also recommend replacing drives containing bad sectors because such drives are more likely to be damaged. Important data may be lost if you choose to proceed. Are you sure you want to continue?"
disk_alert_suggest_badsector_incompatibility_unverified_for_new_hcl	=	"Using incompatible or unverified drives may affect system stability. Incompatible drives are not compatible with your _DISKSTATION_ model. Unverified drives have not been tested to be compatible with or did not pass the compatibility tests for your _DISKSTATION_ model. We recommend using drives on the <a href="https://www.synology.com/compatibility?search_by=products&model={0}&category=hdds&p=1" target="_blank" class="link-font">Synology Products Compatibility List</a> to ensure system stability. We also recommend replacing drives containing bad sectors because such drives are more likely to be damaged. Important data may be lost if you choose to proceed. Are you sure you want to continue?"
disk_alert_suggest_badsector_unverified	=	"We recommend using drives on the <a href="https://www.synology.com/compatibility?search_by=products&model={0}&category=hdds&p=1" target="_blank" class="link-font">Synology Products Compatibility List</a> to ensure system stability, or updating the drive database (at HDD/SSD > Settings) if your drives are already on the list. We also recommend replacing drives containing bad sectors because such drives are more likely to be damaged. Important data may be lost if you choose to proceed. Are you sure you want to continue?"
disk_alert_suggest_badsector_unverified_for_new_hcl	=	"Using unverified drives may affect system stability. Unverified drives have not been tested to be compatible with or did not pass the compatibility tests for your _DISKSTATION_ model. We recommend using drives on the <a href="https://www.synology.com/compatibility?search_by=products&model={0}&category=hdds&p=1" target="_blank" class="link-font">Synology Products Compatibility List</a> to ensure system stability. We also recommend replacing drives containing bad sectors because such drives are more likely to be damaged. Important data may be lost if you choose to proceed. Are you sure you want to continue?"
disk_alert_suggest_dsm_update	=	"<span class="red-status">_OSNAME_ update is required for you to continue using the selected drives.</span> To update _OSNAME_, go to <span class="sm-font-bold">Control Panel</span> > <span class="sm-font-bold">Update & Restore</span>. If you continue without updating _OSNAME_, the integrity of your data may be at risk."
disk_alert_suggest_fw_upgrade	=	"<span class="red-status">Firmware update is required for you to continue using the selected drives.</span> To update the drive firmware, go to <span class="sm-font-bold">HDD/SSD</span> > <span class="sm-font-bold">Action</span> > <span class="sm-font-bold">Firmware Update</span>. If you continue without updating the drive firmware, the integrity of your data may be at risk."
disk_alert_suggest_incompatibility	=	"We strongly recommend using only <a href="https://www.synology.com/compatibility?search_by=products&model={0}&category=hdds&p=1" target="_blank" class="link-font">compatible drives</a>. Incompatible or unrecognized drives could affect system stability and result in data loss. Synology will not provide technical support if you proceed. Are you sure you want to continue?"
disk_alert_suggest_incompatibility_unverified	=	"Using incompatible drives or drives not on the <a href="https://www.synology.com/compatibility?search_by=products&model={0}&category=hdds&p=1" target="_blank" class="link-font">Synology Products Compatibility List</a> may affect system stability. We recommend checking the compatibility list for compatible drives or updating the drive database (at HDD/SSD > Settings) if your drives are already on the list. Important data may be lost if you choose to proceed. Are you sure you want to continue?"
disk_alert_suggest_incompatibility_unverified_for_new_hcl	=	"We strongly recommend using only <a href="https://www.synology.com/compatibility?search_by=products&model={0}&category=hdds&p=1" target="_blank" class="link-font">compatible drives</a>. Using the drives that are not on the Synology Products Compatibility List could affect system stability and result in data loss. Synology will not provide technical support if you proceed. Are you sure you want to continue?"
disk_alert_suggest_migrated	=	"We strongly recommend using only <a href="https://www.synology.com/compatibility?search_by=products&model={0}&category=hdds&p=1" target="_blank" class="link-font">compatible drives</a>. Migrated drives have not been tested to be compatible with your _DISKSTATION_ model and might affect system stability. Synology will not provide technical support if you proceed. Are you sure you want to continue?"
disk_alert_suggest_show_compatibility_link	=	"We recommend using <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">compatible drives</a>. Are you sure you want to continue?"
disk_alert_suggest_unverified	=	"We recommend using drives on the <a href="https://www.synology.com/compatibility?search_by=products&model={0}&category=hdds&p=1" target="_blank" class="link-font">Synology Products Compatibility List</a> to ensure system stability, or updating the drive database (at HDD/SSD > Settings) if your drives are already on the list. Important data may be lost if you choose to proceed. Are you sure you want to continue?"
disk_alert_suggest_unverified_for_new_hcl	=	"We strongly recommend using only <a href="https://www.synology.com/compatibility?search_by=products&model={0}&category=hdds&p=1" target="_blank" class="link-font">compatible drives</a>. Unverified drives have not been tested to be compatible with your _DISKSTATION_ model and might affect system stability. Synology will not provide technical support if you proceed. Are you sure you want to continue?"
disk_allocation_status	=	"Allocation status"
disk_allocation_status_title	=	"Allocation Status"
disk_bad_sector_ct	=	"Bad sector count"
disk_bad_sector_ct_title	=	"Bad Sector Count"
disk_bad_sector_desc	=	"This parameter is a reference value regarding the health-related information of this drive. The parameter refers to the summation of the following values in S.M.A.R.T. Attribute: "Reallocated Sectors Count", "Current Pending Sector Count", and "Uncorrectable Sector Count". An increase in the value indicates that the surface of the drive may be damaged. A decrease in the number of bad sectors indicates that some bad sectors have been automatically repaired by the drive. We recommend backing up your data immediately and going to the S.M.A.R.T. tab to run the Extended Test. Please follow the test result for the recommended actions."
disk_bad_sector_increase	=	"The number of bad sectors on the drive has increased."
disk_bad_sector_info_guide	=	"A drastic increase in bad sector count would indicate the drive is failing. <a class="link-font" href="https://kb.synology.com/DSM/tutorial/How_to_diagnose_drives_health_status_when_receiving_bad_sector_warning" target="_blank">Learn more</a>"
disk_bad_sector_range_error	=	"The value should be between {0} and {1}."
disk_bad_sector_thr_desc	=	"The status of a drive will be changed to Warning when the number of bad sectors reaches the value specified below."
disk_bad_sector_thr_enable	=	"Enable bad sector warning"
disk_bad_sector_thr_title	=	"Bad Sector Warning"
disk_bad_sector_thr_value	=	"Number of bad sectors"
disk_bad_sector_thr_warn	=	"Warning"
disk_bad_sector_thr_warn_desc	=	"{0} bad sectors were found on the drive. We recommend running a S.M.A.R.T. Extended Test for this drive to ensure the drive is healthy."
disk_bad_sector_thr_warn_msg	=	"Drive health status has degraded."
disk_bad_sector_warning_desc	=	"The system will notify you whenever the number of bad sectors increases."
disk_can_not_test	=	"Failed to test"
disk_cant_erase_eunit	=	"Secure Erase cannot be performed on drives in expansion units."
disk_cant_erase_last_system	=	"You cannot perform Secure Erase on the only drive in your system partition."
disk_cant_erase_not_support	=	"This drive does not support Secure Erase."
disk_cant_erase_on_volume	=	"This drive is currently in use. Please remove the drive from the storage pool and try again."
disk_cant_erase_system_disk	=	"Secure Erase cannot be performed on system drives. To perform Secure Erase on this drive, please deactivate it first."
disk_compatibility_compatible	=	"Compatible"
disk_compatibility_drive_incompatible	=	"This drive is incompatible with _DISKSTATION_."
disk_compatibility_drive_not_in_support	=	"This drive is not on the Synology Products Compatibility List."
disk_compatibility_drive_not_in_support_tooltip	=	"You can still use this drive although it has not been tested for compatibility. However, we recommend using drives compatible with _DISKSTATION_ to prevent any issues."
disk_compatibility_dsmupdate_required	=	"_OSNAME_ Update Required"
disk_compatibility_dsmupdate_required_action	=	"Go to <span class="sm-font-bold">Control Panel</span> > <span class="sm-font-bold">Update & Restore</span> > <span class="sm-font-bold">_OSNAME_ Update</span> to update the _OSNAME_ version."
disk_compatibility_dsmupdate_required_status	=	"Some features of this drive are limited because it is no longer compatible with the current _OSNAME_ version."
disk_compatibility_fwupgrade_required	=	"Firmware Update Required"
disk_compatibility_fwupgrade_required_status	=	"Some features of this drive are limited because the firmware version is no longer compatible."
disk_compatibility_incompatible	=	"Incompatible"
disk_compatibility_incompatible_recommend	=	"Using incompatible drives may affect system stability. We recommend checking the <a href="https://www.synology.com/compatibility?search_by=products&model={0}&category=hdds&p=1" target="_blank" class="link-font">Synology Products Compatibility List</a> for compatible drives."
disk_compatibility_incompatible_status	=	"Incompatible with _DISKSTATION_"
disk_compatibility_migrated	=	"Migrated from another system"
disk_compatibility_multi_drives_incompatible	=	"One or more of the selected drives are incompatible with _DISKSTATION_."
disk_compatibility_multi_drives_incompatible_and_not_in_support	=	"One or more of the selected drives are either incompatible with _DISKSTATION_, or are not on the Synology Products Compatibility List."
disk_compatibility_multi_drives_not_in_support	=	"One or more of the selected drives are not on the Synology Products Compatibility List."
disk_compatibility_not_in_support_recommend	=	"We recommend using drives on the <a href="https://www.synology.com/compatibility?search_by=products&model={0}&category=hdds&p=1" target="_blank" class="link-font">Synology Products Compatibility List</a> to ensure system stability, or updating the drive database (at HDD/SSD > Settings) if your drives are already on the list."
disk_compatibility_not_in_support_status	=	"Not tested for compatibility"
disk_compatibility_not_verified	=	"Unverified"
disk_compatibility_permitted	=	"Unverified"
disk_compatibility_unrecognized	=	"Unrecognized"
disk_compatibility_unrecognized_status	=	"unrecognized"
disk_compatibility_unverified	=	"Unverified"
disk_compatibility_unverified_status	=	"Unverified"
disk_config_life_warn_notification	=	"SSD endurance notification is not enabled. Go to <a style="font-size:12px;text-decoration:underline;" data-syno-app="SYNO.SDS.StorageManager.Instance" data-syno-fn="SYNO.SDS.StorageManager.Disk.Main" data-syno-tab="general">Storage Manager > HDD/SSD > Settings > SSD Estimated Endurance Notification</a> to enable the notifications."
disk_config_warn_notification	=	"Bad sector warning is not enabled. Please go to <a style="font-size:12px;text-decoration:underline;" data-syno-app="SYNO.SDS.StorageManager.Instance" data-syno-fn="SYNO.SDS.StorageManager.Drive.Main" data-syno-tab="general">HDD/SSD > Settings > Bad Sector Warning</a> to enable bad sector warning."
disk_contact_syno	=	"Please contact Synology Technical Support for assistance."
disk_db_is_latest_version	=	"Drive database is already up-to-date."
disk_db_last_updated_time	=	"Last update time"
disk_db_need_offline_upload	=	"The system cannot update the drive database due to an Internet connection issue. Click <span class="sm-font-bold">Manual Update</span> and upload the latest Offline Update Pack."
disk_disable_info_num_esata	=	"eSATA port {0} disabled"
disk_disable_info_num_eunit	=	"Drive slot {0} on the expansion unit {1} disabled"
disk_disable_info_num_int	=	"Drive slot {0} disabled"
disk_disable_title	=	"Drive slot disabled"
disk_disable_unc_warning_title	=	"Disable bad sector warning"
disk_disable_warning_btn	=	"Disable Warning"
disk_disable_warning_desc	=	"Warning: The S.M.A.R.T. value is shown to warn you of the issues occurred on the drive. Please do not use this feature unless you fully understand the indications of this value and agree to take the risk of data loss. Once this action is completed, _OSNAME_ will no longer monitor this S.M.A.R.T. value."
disk_disable_warning_title	=	"Disable S.M.A.R.T. #{0} Warning"
disk_disks	=	"HDD/SSD"
disk_drive_status	=	"Drive status"
disk_drive_status_title	=	"Drive Status"
disk_en	=	"Enable Drive Slot"
disk_en_info	=	"Please replace the corrupted drive and {0} the slot."
disk_en_info_esata	=	"Please replace the corrupted drive and {0} the eSATA port."
disk_en_warn	=	"Are you sure you want to enable it?"
disk_enable_slot_hint	=	"Before enabling the drive slot, make sure you have already replaced the defective drive with a healthy one."
disk_enable_warning_desc	=	"Monitoring of some health fields has been modified."
disk_enable_warning_title	=	"Enable Warning"
disk_err_desc	=	"{0}, {1}, {2}, and {3} indicate the total number of events that have occurred on your drive or system. These parameters provide warning and information about drive health, but they do not imply imminent drive failure, and your data is safely stored."
disk_err_send_health_report	=	"Failed to send the health report. Please try again later. If the issue persists, please <a class="link-font" target="_blank" href="https://www.synology.com/company/contact_us">contact us</a> for technical support."
disk_err_set_wcache	=	"Unable to configure write cache. Please try again later."
disk_err_update_db	=	"Failed to update the database because of the unstable network connection or temporary disconnection from the remote server. Please try again later."
disk_error_reset_fail_title	=	"Drive reset condition"
disk_error_timeout_title	=	"Drive I/O command timeout condition"
disk_error_unc_title	=	"Drive I/O error condition"
disk_field_allocation_role	=	"Allocation role"
disk_field_allocation_role_title	=	"Allocation Role"
disk_field_drive_action	=	"Drive action"
disk_field_drive_action_title	=	"Drive Action"
disk_health_description_and_other_warning	=	"Description & Other Issues"
disk_health_info	=	"Health Info"
disk_health_prediction	=	"Drive Failure Prediction"
disk_health_prediction_history_note	=	"This chart shows the predicted possibility of future drive damages. Once the score exceeds the threshold, this drive is likely to fail."
disk_health_prediction_history_title	=	"Drive Failure Prediction"
disk_health_prediction_history_yaxis	=	"Failure Possibility"
disk_health_report_desc	=	"This option sends a report regarding recent drive health on the first day of each month."
disk_health_report_enable	=	"Send monthly drive health report via email"
disk_health_report_error_disk	=	"Drives that need your attention are listed below. You can refer to <a class="link-font" href="https://sy.to/drivereportindex" target="_blank">this article</a> for more information on drive health."
disk_health_report_next_time	=	"Next send at"
disk_health_report_no_error_disk	=	"No problem detected with the drives in _OSNAME_."
disk_health_report_note	=	"Before enabling drive health report, please go to {0} and enable email notifications."
disk_health_report_send_now	=	"Send Report Now"
disk_health_report_support	=	"Only certain features are supported on SAS drives."
disk_health_report_support_note	=	"Note: Only certain features are supported on SAS drives."
disk_health_report_title	=	"Drive Health Report"
disk_health_statistics	=	"Statistics"
disk_health_status	=	"Health status"
disk_health_status_title	=	"Health Status"
disk_health_test	=	"Drive Health Test"
disk_health_test_action_extend_type_all	=	"S.M.A.R.T. extended test and IronWolf Health test on all supported drives"
disk_health_test_action_extend_type_sel	=	"S.M.A.R.T. extended test and IronWolf Health test on selected drives"
disk_health_test_action_quick_type_all	=	"S.M.A.R.T. quick test and IronWolf Health test on all supported drives"
disk_health_test_action_quick_type_sel	=	"S.M.A.R.T. quick test and IronWolf Health test on selected drives"
disk_health_test_history_title	=	"Health Diagnosis Results"
disk_history_mode_incremental	=	"Cumulative"
disk_history_mode_sigle	=	"Month-on-month"
disk_history_title	=	"History"
disk_history_unc_tooltip	=	"When the bad sector count displays a negative number, it means some bad sectors were repaired/remapped and data was transferred to spare areas of the drive."
disk_id_title	=	"Drive ID"
disk_identify_failed_ct	=	"Drive re-identification count"
disk_identify_failed_desc	=	"This parameter is a reference value regarding the health-related information of this drive. The parameter indicates the number of times that the system attempted to re-identify the drive. We recommend backing up your data immediately and going to the S.M.A.R.T. tab to run the Extended Test. Please follow the test result for the recommended actions."
disk_identify_failed_info_guide	=	"A parameter for evaluating the health of a drive. A drastic increase in drive re-identification count might indicate an issue that requires your attention. <a class="link-font" href="https://sy.to/reidentify" target="_blank">Learn more</a>"
disk_info_general	=	"Settings"
disk_install_en_unc_warn	=	"Enable bad sector warning for drives"
disk_install_threshold	=	"Number of bad sectors"
disk_ironwolf_health	=	"IronWolf Health"
disk_ironwolf_health_manage	=	"IronWolf Health Management"
disk_ironwolf_health_status	=	"IronWolf Health Status"
disk_ironwolf_link_note	=	"If you have questions regarding the test result, please contact your drive reseller or manufacturer for further assistance."
disk_ironwolf_pro_link_note	=	"This Seagate IronWolf Pro drive comes with a 2-year complimentary Rescue Data Recovery Service. Please register <a class="link-font" target="_blank" href="http://www.seagate.com/Ironwolfpro-rescue">here</a>."
disk_ironwolf_test	=	"IronWolf Health Test"
disk_ironwolf_test_action_type_all	=	"IronWolf Health test on all supported drives"
disk_ironwolf_test_action_type_sel	=	"IronWolf Health test on selected drives"
disk_ironwolf_test_pre_result	=	"Last IronWolf Health Test result"
disk_ironwolf_test_processing	=	"Performing the IronWolf Health test will take a few minutes. The exact processing time may vary under different system environments."
disk_less_than_one_month	=	"Less than 1 month"
disk_log_event_change_life_warn_thr	=	"Modified the threshold of the SSD estimated endurance notification to {0}."
disk_log_event_deactivate	=	"Drive has been deactivated."
disk_log_event_disable_bad_sec_warn	=	"Disabled the bad sector warning."
disk_log_event_disable_disk_port	=	"Drive slot has been disabled."
disk_log_event_disable_life_warn	=	"Disabled the SSD endurance warning."
disk_log_event_disable_wdda_service	=	"Disabled the WDDA service."
disk_log_event_drive_bundle_upgrade_db	=	"An update for the drive database is required."
disk_log_event_drive_bundle_upgrade_dsm	=	"Updating _OSNAME_ to version {0} is required."
disk_log_event_drive_bundle_upgrade_firmware	=	"Updating the firmware of this Synology drive to version {0} is required."
disk_log_event_enable_bad_sec_warn	=	"Enabled the bad sector warning."
disk_log_event_enable_life_warn	=	"Enabled the SSD endurance warning and set the endurance percentage to {0}."
disk_log_event_enable_wdda_service	=	"Enable the WDDA service."
disk_log_event_extend_smart_failed	=	"S.M.A.R.T. extended test failed."
disk_log_event_idnf	=	"Trying to re-identify drive."
disk_log_event_ihm_disable	=	"IronWolf Health test warning ({0}) for the drive has been disabled."
disk_log_event_ihm_enable	=	"IronWolf Health test warning for the drive has been re-enabled."
disk_log_event_ihm_remove	=	"Suppression of IronWolf Health test warning for the drive has been removed."
disk_log_event_ihm_suppress	=	"IronWolf Health test warning ({0}) for the drive has been suppressed."
disk_log_event_ioerr	=	"An I/O error occurred to the drive."
disk_log_event_life_below_thre	=	"Estimated endurance of the drive is below the pre-defined value."
disk_log_event_life_below_thre_with_value	=	"Estimated endurance ({0}%) of the drive is below the pre-defined value ({1}%)."
disk_log_event_life_critical	=	"The SSD's estimated endurance has reached its limit."
disk_log_event_life_disable	=	"Estimated endurance warning ({0}%) for the drive has been disabled."
disk_log_event_life_enable	=	"Estimated endurance warning for the drive has been re-enabled."
disk_log_event_life_remove	=	"Suppression of the estimated endurance warning for the drive has been removed."
disk_log_event_life_suppress	=	"Estimated endurance warning ({0}%) for the drive has been suppressed."
disk_log_event_md_uncorrected_read_err	=	"A read error occurred at sector [{0}]."
disk_log_event_md_write_err	=	"A write error occurred at sector [{0}]."
disk_log_event_nvme_perc_used_disable	=	"The NVMe Percentage Used warning ({0}%) for this drive was disabled."
disk_log_event_nvme_perc_used_enable	=	"The NVMe Percentage Used warning for this drive was enabled."
disk_log_event_nvme_perc_used_remove	=	"The suppression of the NVMe Percentage Used warning for this drive was canceled."
disk_log_event_nvme_perc_used_suppress	=	"The NVMe Percentage Used warning ({0}%) for this drive was suppressed."
disk_log_event_plugin	=	"Drive plugged in."
disk_log_event_plugout	=	"Drive plugged out."
disk_log_event_prediction_fail	=	"The system predicts that this drive may become inaccessible within the following 3 months."
disk_log_event_quick_smart_extend_suggest	=	"S.M.A.R.T. quick test failed. We recommend running the extended test."
disk_log_event_quick_smart_failed	=	"S.M.A.R.T. quick test failed."
disk_log_event_reset_fail	=	"The system detected that drive reset command has failed."
disk_log_event_restore	=	"Drive indicator status restored."
disk_log_event_retrieve_fail	=	"Unable to retrieve this drive's serial number. Please contact the drive manufacturer."
disk_log_event_retry	=	"Trying to reconnect to drive."
disk_log_event_sb_change_life_warn_thr	=	"Modified the threshold of the Synology SSD estimated endurance notification to {0} months."
disk_log_event_sb_disable_life_warn	=	"Disabled the Synology SSD estimated endurance notification."
disk_log_event_sb_enable_life_warn	=	"Enabled the Synology SSD estimated endurance notification and set the threshold to {0} months."
disk_log_event_sb_life_critical	=	"The Synology SSD's estimated endurance has reached its limit."
disk_log_event_smart_attr_disable	=	"A S.M.A.R.T. attribute (#{0}) of this drive failed in the past. This error warning has been disabled."
disk_log_event_smart_attr_enable	=	"A S.M.A.R.T. attribute (#{0}) of this drive failed in the past. This error warning was disabled but has now been re-enabled."
disk_log_event_smart_attr_remove	=	"A S.M.A.R.T. attribute (#{0}) of this drive failed in the past. This error warning was suppressed but has now been resumed."
disk_log_event_smart_attr_suppress	=	"A S.M.A.R.T. attribute (#{0}) of this drive failed in the past. This error warning has been suppressed."
disk_log_event_smart_test_disable	=	"The warning of previously failed S.M.A.R.T. tests for the drive has been disabled."
disk_log_event_smart_test_enable	=	"The warning of previously failed S.M.A.R.T. tests for the drive has been re-enabled."
disk_log_event_smart_test_end	=	"S.M.A.R.T. test ended."
disk_log_event_smart_test_remove	=	"Suppression of the warning of previously failed S.M.A.R.T. tests for the drive has been removed."
disk_log_event_smart_test_start	=	"S.M.A.R.T. test started."
disk_log_event_smart_test_suppress	=	"The warning of previously failed S.M.A.R.T. tests for the drive has been suppressed."
disk_log_event_status_acc_err	=	"The drive experienced critical access error."
disk_log_event_status_critical	=	"The drive is in critical status. Please go to Storage Manager > HDD/SSD > Health Info for details."
disk_log_event_status_failing	=	"The drive has failed. Please go to Storage Manager > HDD/SSD > Health Info for details."
disk_log_event_status_low_perf	=	"Drive performance issues may have occurred. Please go to Storage Manager > HDD/SSD > HDD/SSD > Health Info for more information."
disk_log_event_status_warning	=	"The drive is in warning status. Please go to Storage Manager > HDD/SSD > Health Info for details."
disk_log_event_switch	=	"Drive indicator status switched to "alert" for {0} minutes."
disk_log_event_switch_singular	=	"Drive indicator status switched to "alert" for {0} minute."
disk_log_event_timeout	=	"The system detected an I/O command timeout, but it can still work properly and continue monitoring this drive."
disk_log_event_unc	=	"I/O errors."
disk_log_event_unc_disable	=	"Bad sector warning ({0}) for the drive has been disabled."
disk_log_event_unc_enable	=	"Bad sector warning for the drive has been re-enabled."
disk_log_event_unc_exceed_thre	=	"The number of bad sectors on the drive has exceeded the pre-defined limit."
disk_log_event_unc_remove	=	"Suppression of bad sector warning for the drive has been removed."
disk_log_event_unc_suppress	=	"Bad sector warning ({0}) for the drive has been suppressed."
disk_log_event_wcache_disable	=	"Drive write cache has been disabled successfully."
disk_log_event_wcache_enable	=	"Drive write cache has been enabled successfully."
disk_log_event_wdda_disable	=	"The WDDA warning status (0x{0}) for this drive was disabled."
disk_log_event_wdda_enable	=	"The WDDA warning status for this drive was enabled."
disk_log_event_wdda_remove	=	"Suppression of the WDDA warning status for this drive was canceled."
disk_log_event_wdda_suppress	=	"The WDDA warning status (0x{0}) for this drive was suppressed."
disk_logs	=	"Logs"
disk_low_perf_in_raid_now_desc	=	"The system has detected that the overall performance of the storage pool is not optimized, possibly resulted from drive wear and tear or other factors. To improve the performance, we recommend replacing the following one or more drives: {0}"
disk_low_perf_in_raid_past_desc	=	"The system detected that the overall performance of the storage pool was not optimized, possibly resulted from drive wear and tear or other factors. To improve the performance, we recommend replacing this drive."
disk_low_seq_perf_desc	=	"The system detected that the sequential read performance of this drive has worsened, and thus may affect the overall system performance. Please replace the drive to improve the sequential read performance."
disk_mail_incre_note	=	"(+{0} since last month)"
disk_mail_title_attention	=	"Attention required"
disk_mail_title_no_new_err	=	"No new errors"
disk_mail_title_normal	=	"Healthy"
disk_mail_title_note	=	"Warning"
disk_modify_warning_title	=	"Modify Drive Warning"
disk_no_sched_smart_test_desc	=	"No S.M.A.R.T. Test is scheduled. We recommended going to the S.M.A.R.T. tab and scheduling a S.M.A.R.T. Test for this drive, thereby ensuring drive data integrity."
disk_nvme_perc_used	=	"NVMe Percentage Used"
disk_past_seq_perf_desc	=	"The sequential read performance of this drive was once low, but has returned to the previous level."
disk_perf_already_testing	=	"This drive is undergoing a performance test. Please try again after the test is complete. You can also go to Storage Manager > HDD/SSD > Action > Benchmark to stop the test now."
disk_perf_benchmark	=	"Benchmark"
disk_perf_choose_title	=	"Select Test"
disk_perf_compare_with	=	"Compared test"
disk_perf_confirm_full_test_text	=	"The system will start running the extended performance test. <font class="red-status">This operation will cause data loss on this drive.</font> Are you sure you want to continue?"
disk_perf_diff_type_warn	=	"You cannot compare different types of tests."
disk_perf_do_test_continue	=	"Yes"
disk_perf_do_test_warn_info	=	"The drive is currently busy because its utilization is {0}%. We recommend only performing tests on drives for which the utilization is below {1}%. Otherwise, results may be inaccurate. Are you sure you want to continue anyway?"
disk_perf_do_test_warn_title	=	"The drive is currently busy."
disk_perf_full_test_warn	=	"This operation would destroy data in this disk."
disk_perf_insufficient_num	=	"At least two drives are required for the system to perform Benchmark."
disk_perf_is_testing	=	"Testing Performance"
disk_perf_latest_test	=	"Latest test"
disk_perf_read_performance	=	"Read Performance"
disk_perf_run_test_now	=	"Run Test Now"
disk_perf_same_log_warn	=	"You cannot select the same log for comparison."
disk_perf_stop_test	=	"Stop Test"
disk_perf_system_busy_warn	=	"To ensure system availability, you can only run performance test on {0} drives at most."
disk_perf_test_type	=	"Test type"
disk_perf_test_type_basic	=	"Basic"
disk_perf_test_type_full	=	"Extended"
disk_perf_write_performance	=	"Write Performance"
disk_perf_write_performance_info	=	"This performance testing is not applicable for drives used in SSD caches, system slots, or if the drive is the only remaining drive in your system."
disk_poweron_hours	=	"Power-on time"
disk_prediction_main_factor_bad_sec_ct	=	"Detected bad sectors on the drive."
disk_prediction_main_factor_bad_sec_ct_diff	=	"The bad sector count has increased greatly."
disk_prediction_main_factor_exc_bad_sec_ct	=	"The bad sector count has reached the predefined warning level."
disk_prediction_main_factor_no_record	=	"No prediction records"
disk_prediction_main_factor_observe	=	"Not enough data to predict a precise failure possibility."
disk_prediction_main_factor_retry	=	"An error of reconnecting with the drive occurred."
disk_prediction_main_factor_retry_diff	=	"The number of drive re-connection errors increased considerably."
disk_prediction_main_factor_rule_idnf	=	"Drive has been re-identified (IDNF error) too many times"
disk_prediction_main_factor_rule_retry	=	"An error where the system has to reconnect to the drive continues to occur."
disk_prediction_main_factor_rule_unc	=	"Drive access errors continue to occur."
disk_prediction_main_factor_smart_info	=	"S.M.A.R.T attribute #{0} {1} ."
disk_prediction_main_factor_smart_test_normal_past	=	"S.M.A.R.T. test has failed before."
disk_prediction_main_factor_unc	=	"A drive access error occurred."
disk_prediction_main_factor_unc_diff	=	"The number of drive access errors increased considerably."
disk_process_locate	=	"Showing drive slot location"
disk_process_sys_repair	=	"Repairing system partition"
disk_reason_crt_cache_multi_desc_link	=	"There are <a class="{0}" href="#">{1} drives</a> that do not meet the drive requirements and cannot be selected."
disk_reason_crt_cache_single_desc_link	=	"There is <a class="{0}" href="#">{1} drive</a> that does not meet the drive requirements and cannot be selected."
disk_reason_crt_pool_multi_desc_link	=	"There are <a class="{0}" href="#">{1} drives</a> that do not meet the drive requirements and cannot be selected."
disk_reason_crt_pool_single_desc_link	=	"There is <a class="{0}" href="#">{1} drive</a> that does not meet the drive requirements and cannot be selected."
disk_reason_drive_actn_part	=	"drive action"
disk_reason_drive_disable	=	"The drive slot where this drive is located has been disabled."
disk_reason_drive_error	=	"Error occurred on this drive."
disk_reason_drive_location	=	"This drive and the target storage pool are not located on the same device."
disk_reason_drive_location_for_creating	=	"This drive does not match the selected drive source."
disk_reason_drive_location_for_shared_cache	=	"This drive and the target SSD cache group are not located on the same device."
disk_reason_drive_location_for_single_cache	=	"This drive and the target SSD cache are not located on the same device."
disk_reason_drive_normal_tray	=	"This drive is installed in a drive slot reserved for SSD caches."
disk_reason_drive_size_part	=	"drive size"
disk_reason_drive_stat_part	=	"drive status"
disk_reason_drive_status_actived	=	"This drive is deactivated."
disk_reason_drive_status_compatibility	=	"This drive is not on the Synology Products Compatibility List."
disk_reason_drive_status_need_update_dsm	=	"_OSNAME_ update is required for this drive's continued use."
disk_reason_drive_status_need_update_firmware	=	"Firmware update is required for this drive's continued use."
disk_reason_drive_status_syno_block	=	"This drive is not supported by the current _OSNAME_ version."
disk_reason_drive_type_part	=	"drive type"
disk_reason_drive_used	=	"This drive is currently in use."
disk_reason_in_eunit_when_multipath_mismatch	=	"Expansion unit IDs differ between the active and passive servers. Go to the <b>Expansion Topology</b> page for details."
disk_reason_invalid_disk_location	=	"This drive slot is in use by an available or missing storage pool."
disk_reason_m2_add_on_card	=	"This drive is installed via an adapter card and cannot be used in M.2 SSD storage pools."
disk_reason_m2_drive_not_pass_test	=	"This drive has not been tested or validated for M.2 SSD storage pools. <a class="link-font" href="https://sy.to/m2pool" target="_blank">Learn more</a>"
disk_reason_m2_sha	=	"Synology High Availability does not support M.2 SSD storage pools and only allows using this drive for SSD caching."
disk_reason_m2_third_party	=	"This drive has not been tested or validated for M.2 SSD storage pools. <a class="link-font" href="https://sy.to/m2pool" target="_blank">Learn more</a>"
disk_reason_paired_drive_not_exist	=	"There is no corresponding drive on the passive server."
disk_reason_paired_drive_size_not_enough	=	"The size of the corresponding drive on the passive server is too small."
disk_reason_paired_drive_type_not_match	=	"The corresponding drive on the passive server does not meet requirements."
disk_reason_panel_column_header_reason	=	"Reason"
disk_reason_panel_desc_add_drive	=	"The following drives cannot be selected. Please make sure the drives meet all the listed drive requirements first. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Drive_requirements_limitations" target="_blank">Learn more</a>"
disk_reason_panel_desc_add_drive_ha	=	"The following drives cannot be selected. Please make sure the drives on both of the active server and the passive server meet all the listed drive requirements first. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Drive_requirements_limitations" target="_blank">Learn more</a>"
disk_reason_panel_title	=	"Drive Requirements"
disk_reason_passive_drive_size_not_enough	=	"The size of this drive is smaller than the corresponding one on the active server."
disk_reason_template_1	=	"The requirements for <span class="v-sm-bold">{0}</span> are not met."
disk_reason_template_2	=	"The requirements for <span class="v-sm-bold">{0}</span> and <span class="v-sm-bold">{1}</span> are not met."
disk_reason_template_3	=	"The requirements for <span class="v-sm-bold">{0}</span>, <span class="v-sm-bold">{1}</span>, and <span class="v-sm-bold">{2}</span> are not met."
disk_reason_template_4	=	"The requirements for <span class="v-sm-bold">{0}</span>, <span class="v-sm-bold">{1}</span>, <span class="v-sm-bold">{2}</span>, and <span class="v-sm-bold">{3}</span> are not met."
disk_recover_warning_title	=	"Resume Drive Warning"
disk_recovery_notify	=	"Drive Recovery Notification"
disk_remain_endurance	=	"Estimated endurance"
disk_remain_endurance_title	=	"Estimated Endurance"
disk_remain_life	=	"Estimated endurance"
disk_remain_life_cant_estimate	=	"Unable to estimate endurance because this SSD is in poor health condition."
disk_remain_life_cant_estimate_short	=	"Unable to estimate"
disk_remain_life_desc	=	"The estimated SSD endurance is {0}%."
disk_remain_life_info	=	"The value is generated from S.M.A.R.T. attribute {0}."
disk_remain_life_thr_desc	=	"SSD endurance notification monitors the life expectancy of SSDs. The system will send a notification to alert you when an SSD's estimated endurance reaches the specified value."
disk_remain_life_thr_enable	=	"Enable estimated endurance notification"
disk_remain_life_thr_info	=	"Supported on SSDs only."
disk_remain_life_thr_title	=	"SSD Estimated Endurance Notification"
disk_remain_life_thr_value	=	"Endurance (%)"
disk_remain_life_thr_value_err	=	"The value must be between {0} and {1}."
disk_remain_life_thr_warn	=	"Warning"
disk_remain_life_thr_warn_desc	=	"The estimated endurance of the drive is at {0}%. We recommend replacing the drive with a new one when the endurance reaches its limit."
disk_remain_life_title	=	"Estimated Endurance"
disk_remaining_life_reach_user_predefined_level	=	"The estimated endurance of the disk is at {0}%. It reaches the predefined warning level."
disk_remove_warning_title	=	"Suppress Drive Warning"
disk_replace_now	=	"SSD's estimated endurance has reached its limit. Replace it immediately. <a class="link-font" href="https://kb.synology.com/zh-tw/DSM/tutorial/Warranty_Synology_SSDs" target="_blank">Learn more</a>"
disk_retry_ct	=	"Drive reconnection count"
disk_retry_desc	=	"This parameter is a reference value regarding the health-related information of this drive. The parameter refers to the summation of the "UltraDMA CRC Error Count" value in S.M.A.R.T. Attribute and the number of other user interface issues detected by the system. We recommend backing up your data immediately and going to the S.M.A.R.T. tab to run the Extended Test. Please follow the test result for the recommended actions."
disk_retry_info_guide	=	"A parameter for evaluating the health of a drive. A drastic increase in drive reconnection count might indicate an issue that requires your attention. <a class="link-font" href="https://kb.synology.com/DSM/tutorial/How_do_I_know_whether_the_problem_is_with_my_Synology_NAS_or_drive_when_drive_errors_occur" target="_blank">Learn more</a>"
disk_ro_protect_bad_block_thr_desc	=	"This Synology SSD is read-only because the number of bad blocks has exceeded the pre-defined limit. Please back up the data in this Synology SSD immediately and then replace it with a new one to ensure data safety."
disk_ro_protect_bad_block_thr_log	=	"This Synology SSD is read-only because the number of bad blocks has exceeded the pre-defined limit."
disk_sb_life_below_thre_with_value	=	"Estimated endurance ({0} months) of the Synology SSD has dropped to the specified value of {1} months."
disk_schedule_drive_test_btn	=	"Schedule Drive Tests"
disk_schedule_ironwolf_test_btn	=	"Schedule IronWolf Health Tests"
disk_schedule_smart_test_btn	=	"Schedule S.M.A.R.T. Tests"
disk_secure_erase	=	"Secure Erase"
disk_secure_erase_confirm	=	"I understand that all data on the selected drive will be permanently deleted and become unrecoverable"
disk_secure_erase_desc	=	"Secure Erase will completely erase all the data on your drive. You will not be able to recover these data using data recovery services afterwards. It will also remove the system partition on this drive.</br></br>This operation is expected to take {0} minutes.</br></br>Warning: Secure Erase must not be interrupted. Do not shut down the system during the entire process."
disk_secure_erase_desc_with_migrated_warn	=	"Secure Erase will completely erase all the data on your drive. You will not be able to recover these data using data recovery services afterwards. It will also remove the system partition on this drive.</br></br>This operation is expected to take {0} minutes.</br></br>Warning: <ul style='list-style-type:disc;margin-left:28px;'><li>This drive is not on the compatibility list. After Secure Erase is complete, this drive can no longer be used in this _DISKSTATION_.</li><li>Secure Erase must not be interrupted. Do not shut down the system during the entire process.</li></ul>"
disk_secure_erase_done	=	"Secure Erase is complete"
disk_secure_erase_fail	=	"Secure Erase failed"
disk_secure_erase_warn	=	"All data will be permanently deleted and will not be recoverable. Are you sure you want to continue?"
disk_secure_erasing	=	"Erasing"
disk_smart_extend_desc	=	"The entire drive will be scanned to ensure more accurate results."
disk_smart_info_desc	=	"The S.M.A.R.T. attribute value derives from the drive. Each S.M.A.R.T. attribute indicates certain information regarding the drive status."
disk_smart_info_detail_desc	=	"Each threshold is defined by the drive manufacturer. Users will be notified when the attribute value is below the threshold value. If you receive this notification, please make sure to back up the data on this drive to prevent potential data loss caused by drive failure."
disk_smart_info_history_title	=	"Key Information of Drives"
disk_smart_ng_desc	=	"The health status of this drive is abnormal. We recommend replacing the drive."
disk_smart_ok_desc	=	"The drive is healthy."
disk_smart_quick_desc	=	"Basic diagnostic tests will be performed to detect mechanical and electrical errors."
disk_smart_status_degraded	=	"Degraded"
disk_smart_status_failing	=	"Failing"
disk_smart_status_normal	=	"Normal"
disk_smart_test_desc	=	"S.M.A.R.T. Test detects and reports various indicators regarding a drive's reliability. This test assesses the conditions of certain S.M.A.R.T. attributes, drives, discs, motors, and circuits. We recommend running this test during off-peak hours to ensure sufficient system resources are available to complete it."
disk_smart_test_extend_all	=	"Extended test on all supported drives"
disk_smart_test_history	=	"S.M.A.R.T. Test History"
disk_smart_test_perform	=	"S.M.A.R.T. Test"
disk_smart_test_quick_all	=	"Quick test on all supported drives"
disk_smart_test_warn	=	"The health status of this drive has degraded. Are you sure you want to continue?"
disk_ssd_unc_note	=	"Different solid state drives (SSDs) have different S.M.A.R.T. information and error reporting mechanisms. Bad sectors on hard disk drives (HDDs) may indicate that the platters or recording heads have degraded or have been damaged, whereas bad sectors found on SSDs are generally normal and will increase with continuous drive usage. Many SSDs are designed with large spare areas intended for mitigating bad sector issues. However, a rapid increase of bad sector count may indicate that the drive is defective or has reached its total write capacity. Please note that different models of SSDs from different manufacturers may have different reporting mechanisms and numerical weights."
disk_status_acceptable_desc	=	"This drive is not on the Synology Products Compatibility List."
disk_status_acceptable_healthinfo_action	=	"We recommend using compatible drives. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
disk_status_acceptable_healthinfo_desc	=	"This drive is not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">compatibility list</a> of your _DISKSTATION_ model."
disk_status_access_err	=	"Access Error"
disk_status_access_err_desc	=	"An error occurred when accessing this drive. This may indicate that issues have occurred on the drive or with the connection between the drive and _DISKSTATION_."
disk_status_crashed_in_space_action	=	"To continue using this drive, do the following: deactivate the drive (click <b>Action</b> > <b>Deactivate Drive</b>), unplug it, and then wait a few seconds before plugging it in again."
disk_status_crashed_in_space_desc	=	"This drive has been removed from the corresponding storage pool, SSD cache, or SSD cache group."
disk_status_crirical_access_err_action	=	"Replace the drive immediately."
disk_status_crirical_access_err_desc	=	"Errors occurred when accessing this drive."
disk_status_crirical_read_only_action	=	"Back up your data and replace the drive immediately to prevent data loss."
disk_status_crirical_read_only_desc	=	"This drive has become read-only."
disk_status_crirical_worn_out_action	=	"Back up your data and replace the drive immediately to prevent data loss."
disk_status_crirical_worn_out_desc	=	"This SSD's estimated endurance has reached its limit."
disk_status_critical	=	"Critical"
disk_status_critical_action	=	"Please make sure you have backed up your data and replace it now."
disk_status_critical_desc	=	"The health status of this drive has degraded."
disk_status_critical_replace_desc	=	"The drive is severely damaged. Please back up your data and then replace the drive immediately."
disk_status_critical_smart_fail_desc	=	"The self-diagnostic test failed, suggesting that the drive may be failing. Drive replacement is recommended."
disk_status_critical_smart_fail_main_desc	=	"The {0} error of this drive indicates that its health status has seriously degraded."
disk_status_data_detected	=	"Detected"
disk_status_data_lost	=	"Data Lost"
disk_status_deactivated_action	=	"To continue using this drive, unplug it and wait a few seconds before plugging it in again."
disk_status_deactivated_desc	=	"This drive has been deactivated."
disk_status_detected_action	=	"Check the allocation role, click on the corresponding storage on the left panel, and follow the given suggestion."
disk_status_detected_desc	=	"The system has detected data from a storage pool, SSD cache, or SSD cache group."
disk_status_dhm_0100	=	"Abnormally high operating temperature has been detected. Please make sure that the rear ventilation ports are not blocked, and please try to lower the ambient temperature. If the temperature is still high, please go to Control Panel > Hardware & Power > Fan Speed Mode to change the fan operation to a higher speed. If this issue persists, please contact Synology Technical Support."
disk_status_dhm_0101	=	"Detected connection issue on your _DISKSTATION_ and drive interface. Please make sure that the drive is properly installed in the chassis or drive tray, and that the tray is properly installed in your _DISKSTATION_. If this issue persists, please contact Synology Technical Support."
disk_status_dhm_0102	=	"Excessive physical shock to the drive has been detected. Please make sure your drive and _DISKSTATION_ are placed on a stable surface. If this issue persists, please contact Synology Technical Support."
disk_status_dhm_0103	=	"This drive is working in a non-standard orientation. Please make sure that your _DISKSTATION_ is placed on a stable flat surface. If this issue persists, please contact Synology Technical Support."
disk_status_dhm_0105	=	"Excessive vibration has been detected. Please make sure your _DISKSTATION_ is placed on a stable surface. If this issue persists, please contact Synology Technical Support."
disk_status_dhm_0106	=	"Excessive host resets have been detected. Please make sure the drive is properly installed in the chassis or drive tray. We recommend you to perform a power cycle. If this issue persists, please contact Synology Technical Support."
disk_status_dhm_0200	=	"To check the health status of your drive, we recommend running a S.M.A.R.T. extended test on the drive. If this issue persists, please contact the drive reseller or manufacturer."
disk_status_dhm_80	=	"Unknown error occurred. Please contact Synology support team."
disk_status_dhm_81	=	"The test on this drive can not be performed yet because its power-on time is too short. Please wait for 12 hours to allow system to collect the related data on this drive and then restart the test."
disk_status_disable_detail	=	"This drive was in warning status, but the S.M.A.R.T. field monitoring feature has been manually disabled. _OSNAME_ will warn you of drive issues only when an error in another S.M.A.R.T. field occurs."
disk_status_disconnect	=	"Cannot be detected by Controller {0}"
disk_status_disconnect_tooltip	=	"Unable to perform this action because this drive cannot be detected by Controller {0}. Please <a target="_blank" href="https://www.synology.com/company/contact_us">contact us</a> for technical support."
disk_status_error_in_space_action	=	"To resolve this issue, go to the <b>Storage</b> page and follow the <b>Suggestion</b> shown under the corresponding storage pool."
disk_status_error_in_space_desc	=	"The system has encountered errors when attempting to access this drive."
disk_status_failing	=	"Failing"
disk_status_failing_action	=	"Please make sure you have backed up your data and replace it now."
disk_status_failing_replace_desc	=	"The drive is failing. Please back up your data and then replace the drive immediately."
disk_status_failing_severe_desc	=	"This drive is no longer working. Please make sure that your data has been backed up and then replace this drive immediately."
disk_status_faulty_degrade_desc	=	"An I/O error occurred while accessing this drive."
disk_status_faulty_error_desc	=	"An I/O error occurred while accessing this drive. Data in the associated storage pool or SSD cache may be lost because the number of failed drives exceeds the fault tolerance of the RAID configuration."
disk_status_faulty_log_read	=	"Read error: [{0}] at Sector [{1}]"
disk_status_faulty_log_write	=	"Write error: [{0}] at Sector [{1}]"
disk_status_forbidden_action	=	"This drive is incompatible with your _DISKSTATION_ model. Replace this drive immediately."
disk_status_fwupgrade_action	=	"Go to <span class="bold-font">HDD/SSD</span> > <span class="bold-font">Action</span> > <span class="bold-font">Firmware Update</span> to update the drive firmware."
disk_status_hcl_migrated_action	=	"This drive is migrated from another system. We recommend always using <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">compatible drives</a>. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
disk_status_hcl_permitted_action	=	"This drive's compatibility with your _DISKSTATION_ is not verified. Back up your data and replace it with a <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">compatible drive</a>."
disk_status_hcl_unrecognized_action	=	"Your _DISKSTATION_ model cannot recognize this drive. Replace it with a <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">compatible drive</a>."
disk_status_health_prediction_critical_main_desc	=	"According to the {0}multiple drive factors{1} evaluated by Synology's database, the system predicts that this drive may become inaccessible within the following 3 months. Therefore, we recommend replacing this drive to prevent data loss."
disk_status_health_prediction_critical_main_desc_with_cause	=	"According to the {0} multiple drive factors{1} evaluated by Synology's database, the system predicts that this drive may become inaccessible within the following 3 months. Therefore, we recommend replacing this drive to prevent data loss. The following lists the parameter that affects the drive health status the most: {2}"
disk_status_healthy	=	"Healthy"
disk_status_normal	=	"Normal"
disk_status_normal_migrated_desc	=	"This drive is migrated from another system."
disk_status_normal_past_desc	=	"Issues have occurred to this drive before. The drive is working normally now."
disk_status_normal_past_detail	=	"When the drive monitors the drive parameters, some of the S.M.A.R.T. attributes will be monitored in real-time. These S.M.A.R.T. attributes may exceed the built-in limits if issues occur on the drive. However, these attributes should return to normal if the issues are only temporary or are fixed by the recovery mechanism on the drive, and the status of the S.M.A.R.T. attributes will be labeled as: "S.M.A.R.T. attribute failed in the past". This recovery mechanism is implemented on the drive itself. If you have any questions regarding your drive, please consult the drive manufacturer."
disk_status_normal_smart_disable_desc	=	"The health status of this drive is normal. However, some of the S.M.A.R.T. fields have been disabled."
disk_status_normal_smart_disable_detail	=	"This drive has a failing S.M.A.R.T. field currently disabled for monitoring. _OSNAME_ will warn you of drive issues only if another S.M.A.R.T. field or S.M.A.R.T. test fails."
disk_status_normal_suppress_detail	=	"This drive has a failing S.M.A.R.T. field currently being suppressed. If all the other values remain unchanged, _OSNAME_ will warn you again only if the field continues to degrade."
disk_status_not_support_action	=	"To use this drive, click <b>Action</b> > <b>Reset Drive</b> to format its existing settings."
disk_status_not_support_desc	=	"This drive contains settings not supported by the current system."
disk_status_remain_life_desc	=	"This SSD's estimated endurance has dropped to the value you specified. When this SSD reaches its endurance limit, replace it with a new one to ensure data safety."
disk_status_remain_life_repeat_main_desc	=	"Although a previous SSD endurance warning was suppressed, the endurance of this SSD has lowered again. The health status of this drive may have degraded."
disk_status_remain_life_severe_main_desc	=	"This SSD's estimated endurance is reaching its limit. Back up the data in this SSD immediately and then replace the old SSD with a new one to ensure data safety."
disk_status_reset_fail_critical_main_desc	=	"Multiple reset command errors have occurred on this drive recently. This drive may become defective soon; therefore, we strongly recommend replacing it with a new one."
disk_status_reset_fail_critical_main_desc_guide	=	"Multiple reset command errors have occurred recently on this drive. We recommend <a href="https://kb.synology.com/DSM/tutorial/How_do_I_know_whether_the_problem_is_with_my_Synology_NAS_or_drive_when_drive_errors_occur#x_anchor_swap" target="_blank">checking whether the errors originated from the drive or the drive slot</a>."
disk_status_smart_critical_fail	=	"#{0} {1} has failed. This typically suggests severe electrical or physical damage or degradation has occurred on the drive. Drive replacement is recommended."
disk_status_smart_critical_fail_10	=	"The S.M.A.R.T. attribute Spin Retry Count (#10) of this drive has failed. Severe electrical or mechanical issues may have occurred on the drive motor."
disk_status_smart_critical_fail_187	=	"The S.M.A.R.T. attribute Reported Uncorrectable Errors (#187) of this drive has failed. Data loss may have occurred due to severe electrical or mechanical issues."
disk_status_smart_critical_fail_188	=	"The S.M.A.R.T. attribute Command Timeout (#188) of this drive has failed, indicating that this drive may have degraded and is no longer working properly."
disk_status_smart_critical_fail_198	=	"The S.M.A.R.T. attribute Uncorrectable Sector Count/Offline Uncorrectable (#198) of this drive has failed, indicating that data loss may have occurred due to severe electrical or mechanical issues."
disk_status_smart_critical_fail_5	=	"The S.M.A.R.T. attribute Reallocated Sector Count (#5) of this drive has failed, indicating that data loss may have occurred due to drive surface or reading head degradation."
disk_status_smart_critical_fail_bottom_desc	=	"An error has occurred to S.M.A.R.T. attribute {0} (ID: {1})."
disk_status_smart_critical_fail_main_desc	=	"An error has occurred to the {0} of this drive. This usually indicates that severe electronic or physical damages have occurred to the drive, and that the error cannot be suppressed manually."
disk_status_smart_critical_fail_mask_desc	=	"An error has occurred to S.M.A.R.T. attribute {0} (ID: {1}). This usually means that severe electronic or physical damages have occurred to this drive, and that the error cannot be suppressed manually."
disk_status_smart_info_normal_past_bottom_desc	=	"An error had occurred to S.M.A.R.T. attribute {0} (ID: {1}) of this drive, but was fixed automatically by the drive's recovery mechanism."
disk_status_smart_info_normal_past_main_desc	=	"An error had occurred to the {0} of this drive, but was fixed automatically by the drive's recovery mechanism."
disk_status_smart_repeat_fail	=	"#{0} {1} indicates that this drive has further degraded. This previously failed field had either returned to normal or been suppressed, but has failed again."
disk_status_smart_repeat_fail_bottom_desc	=	"Even though an error was suppressed previously, the same error has occurred to this drive again (S.M.A.R.T. attribute {0}; ID {1})."
disk_status_smart_repeat_fail_main_desc	=	"Even though an error that occurred to {0} was suppressed previously, the same error has occurred to this drive again. This usually means that severe electronic or physical damages have occurred to the drive."
disk_status_smart_repeat_fail_mask_desc	=	"Even though an error was suppressed previously, the same error has occurred to this drive again (S.M.A.R.T. attribute {0}; ID {1}). This usually means that severe electronic or physical damages have occurred to the drive."
disk_status_smart_test_normal_past_main_desc	=	"The {0} previously running on this drive has failed."
disk_status_smart_time_out_action	=	"To avoid potential data loss, back up your data and replace this drive as soon as possible."
disk_status_smart_time_out_desc	=	"Unable to access health information after multiple attempts."
disk_status_suppress_detail	=	"This drive was in warning status, but the monitoring of this field has been manually suppressed. _OSNAME_ will warn you of drive issues only when the value in this field deteriorates."
disk_status_suppress_repeat_detail	=	"This drive has a suppressed health result and has continued to degrade."
disk_status_sys_partition_failed_action	=	"To resolve this issue, go to the <b>HDD/SSD</b> page and click <b>Repair System Partition</b>."
disk_status_sys_partition_failed_desc	=	"This drive's system partition is inaccessible."
disk_status_sys_partition_failed_detail	=	"To resolve this issue, go to the <b>HDD/SSD</b> page and click <b>Repair System Partition</b>."
disk_status_temperature_warning_action	=	"Please make sure that the rear ventilation ports are not blocked and try to lower the ambient temperature."
disk_status_timeout_critical_main_desc	=	"This drive has been adjusted to critical health status because multiple I/O command timeouts have occurred on it recently. This drive may become defective soon; therefore, we strongly recommend replacing it with a new one."
disk_status_timeout_critical_main_desc_guide	=	"Multiple I/O command timeouts have occurred recently on this drive. The drive status has changed to Critical. We recommend <a href="https://kb.synology.com/DSM/tutorial/How_do_I_know_whether_the_problem_is_with_my_Synology_NAS_or_drive_when_drive_errors_occur#x_anchor_swap" target="_blank">checking whether the errors originate from the drive or the drive slot</a>."
disk_status_unc_critical_main_desc	=	"Multiple UNC errors have occurred on this drive recently. This drive may become defective soon; therefore, we strongly recommend replacing it with a new one."
disk_status_unc_critical_main_desc_guide	=	"Multiple UNC errors have occurred recently on this drive. We recommend <a href="https://kb.synology.com/DSM/tutorial/How_do_I_know_whether_the_problem_is_with_my_Synology_NAS_or_drive_when_drive_errors_occur#x_anchor_swap" target="_blank">checking whether the errors originated from the drive or the drive slot</a>."
disk_status_unknown	=	"Unknown"
disk_status_unknown_desc	=	"Failed to retrieve S.M.A.R.T. data because this drive might be failing or incompatible."
disk_status_unsupport	=	"Not supported"
disk_status_unverified_action	=	"There are compatibility issues between your _DISKSTATION_ model and this drive. We recommend replacing this drive."
disk_status_warning	=	"Warning"
disk_status_warning_action	=	"Please keep track of the health status of this drive."
disk_status_warning_desc	=	"The drive is in warning status, you can refer to the Description section for details. Please back up your data immediately and be alert of the drive's health status."
disk_status_warning_dhm_desc	=	"The health status of this drive may have degraded. Physical disturbances have been detected on the drive during its operation."
disk_status_warning_ssd_unc_desc	=	"Bad sectors on the drive were detected; however, they have been repaired."
disk_status_warning_unc_desc	=	"The health status of this drive may have degraded. Bad sectors have been detected but repaired by the drive."
disk_status_warning_unc_main_desc	=	"The bad sector count has reached the predefined warning level. The health status of this drive may have degraded."
disk_status_warning_unc_repeat_main_desc	=	"Although a previous bad sector warning was suppressed, the bad sector count has reached the predefined warning level again. The health status of this drive may have degraded."
disk_status_wdda_warning_action	=	"Please go to the WDDA tab to view the details and take the recommended actions."
disk_status_wdda_warning_main_desc	=	"{0} detected that one or more drives are abnormal."
disk_stop_warranty	=	"Warranty expired"
disk_suppress_disable_warning_desc	=	"Warning: Please do not use this feature unless you fully understand the indications of this value and agree to take the risk of data loss."
disk_suppress_unc_warning_title	=	"Suppress bad sector warning"
disk_suppress_warning_btn	=	"Suppress Warning"
disk_suppress_warning_confirm	=	"I understand and agree"
disk_suppress_warning_desc	=	"Warning: The S.M.A.R.T. value is shown to warn you of the issues occurred on the drive. Please do not use this feature unless you fully understand the indications of this value and agree to take the risk of data loss. _OSNAME_ will continue to monitor the S.M.A.R.T. value after this action is completed, but will trigger a warning only if this value continues to degrade."
disk_suppress_warning_short_desc	=	"_OSNAME_ will continuously monitor this value but will trigger a warning only when this value continues to degrade."
disk_suppress_warning_title	=	"Suppress S.M.A.R.T. #{0} Warning"
disk_test_all_support_disk	=	"Test all supported drives"
disk_test_task_type	=	"Task type"
disk_unc_thr_value_err	=	"The number must be more than 0."
disk_update_db_btn	=	"Update Now"
disk_update_db_desc	=	"This operation is required only when S.M.A.R.T. Info fails to identify most of the S.M.A.R.T. fields, and when the mechanism for automatically updating the drive database fails. This operation does not affect drive compatibility and performance."
disk_update_db_description	=	"The drive database contains information on drive temperature, S.M.A.R.T. attributes, the compatibility list, and firmware updates of Synology drives. The system updates the database automatically and periodically. However, you can also click Update Now to immediately update the database, or click Manual Update to update it by uploading the Offline Update Pack."
disk_update_db_finish	=	"Database successfully updated"
disk_update_db_title	=	"Drive Database"
disk_upload_db_apply_btn	=	"Update"
disk_upload_db_btn	=	"Manual Update"
disk_upload_db_desc	=	"If your _DISKSTATION_ is disconnected from the Internet or if the connection is unstable, please download the Offline Update Pack from Synology's <a class="link-font" href="https://www.synology.com/support/download" target="_blank">Download Center</a> and update the drive database by uploading the pack."
disk_upload_db_error_model_not_match	=	"This update pack does not match your model. Go to Synology's <a class="link-font" href="https://www.synology.com/support/download" target="_blank">Download Center</a>, select <b>{0}</b>, and download the corresponding Offline Update Pack."
disk_upload_db_error_verify	=	"The format of the uploaded pack may be corrupted or incorrect. Please go to Synology's <a class="link-font" href="https://www.synology.com/support/download" target="_blank">Download Center</a> and download the Offline Update Pack again."
disk_upload_db_error_version_too_old	=	"The uploaded pack contains a drive database version older than the current one. Please go to Synology's <a class="link-font" href="https://www.synology.com/support/download" target="_blank">Download Center</a> and download the latest Offline Update Pack."
disk_upload_db_note	=	"<font class="note-font">Note:</font> The drive database cannot be rolled back to an older version. The applied version must be newer than the current one."
disk_upload_db_title	=	"Manual Update"
disk_view_history	=	"View History"
disk_warning_ironwolf_disable	=	"The IronWolf Health test output of this drive is currently disabled."
disk_warning_ironwolf_suppress	=	"The IronWolf Health test output of this drive is currently suppressed."
disk_warning_life_disable	=	"Estimated endurance warning for this drive is currently disabled."
disk_warning_life_suppress	=	"Estimated endurance warning for this drive is currently suppressed."
disk_warning_nvme_perc_used_disable	=	"The NVMe Percentage Used warning for this drive is currently disabled."
disk_warning_nvme_perc_used_suppress	=	"The NVMe Percentage Used warning for this drive is currently suppressed."
disk_warning_smart_disable	=	"S.M.A.R.T. (#{0}) on this drive is currently disabled."
disk_warning_smart_info_past_disable	=	"A S.M.A.R.T. attribute (#{0}) failed in the past. This error warning has been disabled."
disk_warning_smart_info_past_suppress	=	"A S.M.A.R.T. attribute (#{0}) failed in the past. This error warning has been suppressed."
disk_warning_smart_suppress	=	"S.M.A.R.T. (#{0}) on this drive is currently suppressed."
disk_warning_smart_test_past_disable	=	"The warning of previously failed S.M.A.R.T. tests on this drive has been disabled."
disk_warning_smart_test_past_suppress	=	"The warning of previously failed S.M.A.R.T. tests on this drive has been suppressed."
disk_warning_unc_disable	=	"Bad sector warning for this drive is currently disabled."
disk_warning_unc_suppress	=	"Bad sector warning for this drive is currently suppressed."
disk_warning_wdda_disable	=	"The WDDA warning status for this drive is currently disabled."
disk_warning_wdda_suppress	=	"The WDDA warning status for this drive is currently suppressed."
disk_wdda_async	=	"An excessive quantity of interface asynchronous signal recovery events in detected within a short period of time. This may indicate a possible signal connectivity issue between the drive and the system. Please make sure that the drive is properly installed in the chassis or drive tray, and that the tray is properly installed in your _DISKSTATION_, and power off and on the system. If this issue persists, please contact Synology Support Team."
disk_wdda_curr_temp	=	"Abnormal operating temperature has been detected. Please check for room temperature and the rear ventilation ports that may be affecting the temperature, or go to Control Panel > Hardware & Power > Fan Speed Mode to change the fan operation setting. If this issue persists, please stop using drive until temperature has changed to recommended operating range, or contact Synology Support Team."
disk_wdda_description	=	"Western Digital Device Analytics (WDDA) provides operational parameters to help you further manage the WD Purple, Red Plus, and Red Pro HDDs. Once WDDA is enabled, the system will collect the data on your drive every hour and notify you when potential issues are detected. To enable WDDA, please go to Storage Manager > HDD/SSD > Settings."
disk_wdda_enable	=	"Enable the WDDA service"
disk_wdda_enable_desc	=	"With the Western Digital Device Analytics (WDDA) service enabled, all the drives supporting this service will be tested regularly."
disk_wdda_full_title	=	"Western Digital Device Analytics"
disk_wdda_hard_reset	=	"An excessive quantity of hard reset event is detected within a short period of time. This may indicate a potential drive and/or system issue. Please make sure that the drive is properly installed in the chassis or drive tray, and that the tray is properly installed in your _DISKSTATION_, and run the Extended S.M.A.R.T. Self-Test. If this issue persists, please contact Western Digital support team."
disk_wdda_head_load	=	"The drive has accumulated a large number of lifetime head loads. This may cause a wear down to the drive over time and result in early storage failure. Please consider to replace the drive soon. For more information, please contact Western Digital support team."
disk_wdda_head_load_r	=	"An excessively high head load rate is detected. This may cause a wear down to the drive over time and result in early storage failure. Please check and adjust the software settings to reduce the frequency of the drive spin-down and the power cycles to extend the life of the drive. For more information, please contact Western Digital support team."
disk_wdda_high_temp	=	"Abnormally high operating temperature has been detected. Please make sure that the rear ventilation ports are not blocked, and please try to lower the ambient temperature. If the temperature is still high, please go to Control Panel > Hardware & Power > Fan Speed Mode to change the fan operation to a higher speed. If this issue persists, please contact Synology Support Team."
disk_wdda_icrc	=	"An excessive quantity of interface CRC event is detected during data transmission within a short period of time. This may indicate a potential drive and/or system issue. Please make sure that the drive is properly installed in the chassis or drive tray, and that the tray is properly installed in your _DISKSTATION_, and power off and on the system. If this issue persists, please contact Synology Support Team."
disk_wdda_low_temp	=	"Abnormally low operating temperature has been detected. Please try to increase the ambient temperature or go to Control Panel > Hardware & Power > Fan Speed Mode to change the fan operation to a lower speed. If this issue persists, please contact Synology Support Team."
disk_wdda_mech_fail	=	"An excessive quantity of mechanical failures are detected within a short period of time. This may prevent the drive from achieving its normal operating condition. Please run the Extended S.M.A.R.T. Self-Test. If this issue persists, please contact Western Digital support team."
disk_wdda_power_hours	=	"The drive has accumulated a large number of power on hours throughout the entire life of the drive. Please consider to replace the drive soon. For more information, please contact Western Digital support team."
disk_wdda_power_reset	=	"The drive has accumulated a large quantity of power on events. Powering on and off frequently for the drive can cause a wear down to the drive over time. Please consider to replace the drive soon. For more information, please contact Western Digital support team."
disk_wdda_power_reset_r	=	"An excessive quantity of power on events is detected. Powering on and off frequently for the drive can cause a wear down to the drive over time. If the current power on reset rate is excessively high, it could potentially lead to an early storage failure. Please reduce the frequency of power cycles to extend the life of the drive. For more information, please contact Western Digital support team."
disk_wdda_read_recovery	=	"please contact Western Digital support team.An excessive quantity of read recovery events in detected within a short period of time. This occurs when the host system requests data and the drive must go through multiple read recovery attempts to fully read the requested data. This may indicate a potential drive and/or environmental system issue. Please make sure that the drive is properly installed in the chassis or drive tray, and that the tray is properly installed in your _DISKSTATION_, and run the Extended S.M.A.R.T. Self-Test. If this issue persists, please contact Western Digital support team."
disk_wdda_reallocate	=	"An excessive quantity of reallocated sector event is detected within a short period of time. This occurs when the drive decides a location on the media should no longer be used to store data and moves the data at that location to another location on the media. This may indicate a potential drive and/or environmental system issue. Please run the Extended S.M.A.R.T. Self-Test. If this issue persists, please contact Western Digital support team."
disk_wdda_setting_note	=	"Only <a href="{0}" target="_blank" class="link-font">certain drive models</a> support WDDA."
disk_wdda_setting_title	=	"Western Digital Device Analytics (WDDA)"
disk_wdda_soft_reset	=	"An excessive quantity of soft reset event is detected within a short period of time. This may indicate that one or more commands sent to the drive is not completed and is interrupted by the host system. This may indicate a potential drive and/or system issue. Please make sure that the drive is properly installed in the chassis or drive tray, and that the tray is properly installed in your _DISKSTATION_, and run the Extended S.M.A.R.T. Self-Test. If this issue persists, please contact Western Digital support team."
disk_wdda_title	=	"WDDA"
disk_wdda_unc	=	"An excessive quantity of uncorrectable error event is detected within a short period of time, due to the host system requests data that the drive is unable to fully read. This may indicate a potential drive and/or environmental issue. Please make sure your drive and _DISKSTATION_ are placed on a stable surface, and run the Extended S.M.A.R.T. Self-Test. If this issue persists, please contact Western Digital support team."
disk_wdda_work_load	=	"The drive has accumulated a large number of data access. Excessive reading and writing to a drive can cause a wear down to the drive over time. Please consider to replace the drive soon. For more information, please contact Western Digital support team."
disk_wdda_work_load_r	=	"An excessively high read and write rate is detected. This may cause a wear down to the drive over time and result in early storage failure. Please reduce the drive data access rate to extend the life of the drive. For more information, please contact Western Digital support team."
drive_cond_compatibility_desc	=	"Listed on the compatibility list of this system"
drive_cond_compatibility_label	=	"Drive compatibility"
feasibility_disk_perf_is_testing	=	"The selected drive is currently undergoing a performance test. Please wait for the performance test to complete before performing this action, or go to HDD/SSD > Benchmark to stop the test."
fwupgrade_bin_unexpected_missing_alert	=	"偵測到韌體更新檔下載 (上傳) 後，有新增需要更新的硬碟，請重新整理 HDD/SSD 更新頁面，並確認下載 (上傳) 韌體更新檔。"
fwupgrade_cant_download_fw_alert	=	"The system cannot connect to the Synology server. You can go to <span class="bold-font">HDD/SSD</span> > <a>Settings</a> to update the drive database by uploading the latest Offline Update Pack. Please return to this page afterward to see if updates are available."
fwupgrade_cant_download_fw_desc	=	"Unable to automatically check for the firmware updates of Synology drives, possibly because the system is having trouble connecting to the Synology server. You can go to <span class="bold-font">HDD/SSD</span> > <a>Settings</a> to update the drive database by uploading the latest Offline Update Pack. Return to this page afterward to see if updates are available."
fwupgrade_confirm_reboot	=	"You must restart the system to complete the update. Because your Synology drives are in use, the system needs to stop all services during the update to prevent application errors. This process may take a few minutes. Are you sure you want to restart the system?"
fwupgrade_confirm_reboot_cluster	=	"You must restart the cluster to complete the update. Because your Synology drives are in use, the system needs to stop all services during the update to prevent application errors. This process may take a few minutes. Are you sure you want to restart the cluster?"
fwupgrade_confirm_upgrade	=	"If the Synology drives that need to be updated are in use, a system restart is required to safely stop all services and prevent application errors. Are you sure you want to proceed with the firmware update?"
fwupgrade_current_version	=	"Current Version"
fwupgrade_drive_acting_alert	=	"One or more Synology drives are processing other tasks. Please try again later."
fwupgrade_drive_alloc_role	=	"Allocation Role"
fwupgrade_drive_location	=	"Drive ID"
fwupgrade_drive_model	=	"Drive Model"
fwupgrade_drive_no_match_alert	=	"The system detected changes to the Firmware Update list. Please click <span class="bold-font">Refresh</span> to show the new information."
fwupgrade_drive_used_by	=	"Drive Assignment"
fwupgrade_feasibility_check_failed	=	"Updating the firmware of Synology drives"
fwupgrade_firmware_not_latest_alert	=	"The firmware update of Synology drives is not up-to-date on your _DISKSTATION_. Please go to <span class="bold-font">HDD/SSD</span> > <a>Settings</a> and update the drive database by uploading the latest Offline Update Pack."
fwupgrade_firmware_not_match_alert	=	"The firmware update of Synology drives is not up-to-date on your _DISKSTATION_. Please go to <span class="bold-font">HDD/SSD</span> > {0}Settings{1} and update the drive database by uploading the latest Offline Update Pack."
fwupgrade_firmware_status	=	"Firmware Status"
fwupgrade_firmware_status_optional	=	"Update available"
fwupgrade_firmware_status_required	=	"Update required"
fwupgrade_firmware_upgrading_alert	=	"Updating the firmware of Synology drives."
fwupgrade_has_new_firmware_desc	=	"You can update the following Synology drives to the latest firmware. If the firmware status of one or more Synology drives is "Update required," please proceed with the update to ensure compatibility and continued use."
fwupgrade_has_new_firmware_title	=	"Firmware updates available"
fwupgrade_latest_version	=	"Latest Version"
fwupgrade_lock_failed_alert	=	"An error occurred while the system was preparing to update the firmware of Synology drives. Please restart the system and try again."
fwupgrade_log_failed	=	"Unable to update firmware from version {0} to {1}."
fwupgrade_log_successful	=	"Updated firmware from version {0} to {1}."
fwupgrade_no_available_alert	=	"The system cannot connect to the Synology server. You can go to <span class="bold-font">HDD/SSD</span> > {0}Settings{1} to update the drive database by uploading the latest Offline Update Pack. Please return to this page afterward to see if updates are available."
fwupgrade_no_available_desc	=	"Unable to automatically check for the firmware updates of Synology drives, possibly because the system is having trouble connecting to the Synology server. You can go to <span class="bold-font">HDD/SSD</span> > {0}Settings{1} to update the drive database by uploading the latest Offline Update Pack. Return to this page afterward to see if updates are available."
fwupgrade_no_availiable_title	=	"No firmware updates available"
fwupgrade_no_in_use	=	"Unassigned"
fwupgrade_not_enough_space_alert	=	"Insufficient system capacity for firmware updates. Refer to <a class="link-font" href="https://www.synology.com/knowledgebase/DSM/tutorial/General_Setup/DSM_update_insufficient_system_capacity_for_update" target ="_blank">this article</a> for possible solutions."
fwupgrade_notification_summary	=	"{0} has completed the firmware updates for Synology drives. Click <a style="font-size:12px;text-decoration:underline;" data-syno-app="SYNO.SDS.StorageManager.Notify.FirmwareUpgrade.NotificationSummary.Instance" data-syno-param='{1}'>details</a> to view the update results."
fwupgrade_result_failed_desc	=	"Firmware for one or several Synology drives could not be updated. Please make sure they are properly connected to the system and try again later."
fwupgrade_result_failed_title	=	"Firmware updates failed"
fwupgrade_result_firmware_status_failed	=	"Unable to update the firmware from version {0} to {1}"
fwupgrade_result_firmware_status_successful	=	"Updated firmware to version {0}"
fwupgrade_result_sha_failed	=	"Unable to detect {0}, please launch Synology High Availability for more information."
fwupgrade_result_successful_desc	=	"Successfully updated the firmware of the following Synology drives."
fwupgrade_result_successful_title	=	"Firmware updates successful"
fwupgrade_result_upgrading_desc	=	"Firmware updates are in progress."
fwupgrade_result_upgrading_title	=	"Updating firmware"
fwupgrade_status_upgrade_database	=	"Unrecognized firmware version, please update the drive database"
fwupgrade_status_upgrade_dsm	=	"_OSNAME_ update required for continued use"
fwupgrade_status_upgrade_firmware	=	"Firmware update required for continued use"
fwupgrade_status_upgrading	=	"Updating"
fwupgrade_title	=	"Firmware Update"
fwupgrade_up_to_date_desc	=	"The firmware of all Synology drives is up-to-date."
fwupgrade_up_to_date_title	=	"No firmware updates required"
fwupgrade_upgrade_btn	=	"Update"
fwupgrade_upgrading	=	"Updating...Please do not shut down the system."
health_info_ironwolf_sched_guide	=	"Not set. To schedule an IronWolf Health test, go to HDD/SSD > Settings > Test Scheduler."
health_info_smart_sched_guide	=	"Not set. To schedule an S.M.A.R.T. test, go to HDD/SSD > Settings > Test Scheduler."
ihm_is_testing	=	"IronWolf health test in progress"
import_previous_data	=	"Import Previous Data"
import_previous_data_not_ready	=	"Importing previous data. Please try again later."
log_import_done_note	=	"Previous drive-related logs have been imported."
log_update_desc	=	"Log feature has been updated. Do you want to import previous logs?"
log_update_note	=	"Importing previous logs may take some time and require computing resources, which may affect the service performance temporarily."
need_more_disk_hint_no_disk	=	"Cannot perform this action. No drives are available or meet the requirements. <a class="{0}" href="#">View drive requirements</a>"
need_more_disk_hint_not_enough_insert_multiple	=	"Cannot perform this action because the number of drives that meet the requirements is insufficient. Install at least {1} more drives and try again. <a class="{0}" href="#">View drive requirements</a>"
need_more_disk_hint_not_enough_insert_single	=	"Cannot perform this action because the number of drives that meet the requirements is insufficient. Install at least {1} more drive and try again. <a class="{0}" href="#">View drive requirements</a>"
new_dr_cfg_axn_add_dr	=	"Add drive for storage expansion"
new_dr_cfg_axn_add_dr_shared_cache	=	"Add drive to SSD cache group"
new_dr_cfg_axn_chg_raid_typ	=	"Change RAID type"
new_dr_cfg_axn_chg_raid_typ_shared_cache	=	"Change RAID type"
new_dr_cfg_axn_crt_pool	=	"Create storage pool"
new_dr_cfg_axn_crt_ssd_cache	=	"Create SSD cache"
new_dr_cfg_axn_grp_crt	=	"Create"
new_dr_cfg_axn_grp_repair	=	"Repair"
new_dr_cfg_axn_grp_setting	=	"Manage Storage Pools"
new_dr_cfg_axn_grp_setting_shared_cache	=	"Manage SSD Cache Group"
new_dr_cfg_axn_hot_spare	=	"Assign as hot spare"
new_dr_cfg_axn_repair_pool	=	"Repair storage pool"
new_dr_cfg_axn_repair_shared_cache	=	"Repair SSD cache group"
new_dr_cfg_axn_repair_ssd_cache	=	"Repair SSD cache"
new_dr_cfg_axn_repl_dr	=	"Replace drive"
new_dr_cfg_axn_repl_dr_shared_cache	=	"Replace drive"
new_dr_wzd_ttl	=	"Manage Available Drives"
no_available_hint_insert_multiple_idle_multiple	=	"There are <a class="{0}" href="#">{1} drives</a> that do not meet the drive requirements and cannot be selected. To perform this operation, you need to insert at least {2} more drives that meet the requirements."
no_available_hint_insert_multiple_idle_single	=	"There is <a class="{0}" href="#">{1} drive</a> that does not meet the drive requirements and cannot be selected. To perform this operation, you need to insert at least {2} more drives that meet the requirements."
no_available_hint_insert_single_idle_multiple	=	"There are <a class="{0}" href="#">{1} drives</a> that do not meet the drive requirements and cannot be selected. To perform this operation, you need to insert at least {2} more drive that meets the requirements."
no_available_hint_insert_single_idle_single	=	"There is <a class="{0}" href="#">{1} drive</a> that does not meet the drive requirements and cannot be selected. To perform this operation, you need to insert at least {2} more drive that meets the requirements."
no_free_disk_to_manage	=	"No drives are available."
nvme_critical_warning_media_error	=	"The reliability of this NVMe SSD has dropped because an internal error or severe media-related error has occurred to this SSD."
nvme_critical_warning_reach_vendor_threshold	=	"The Available Spare attribute of this NVMe SSD is {0}%, which is below the {1}% threshold set by its manufacturer."
nvme_critical_warning_read_only_mode	=	"This NVMe SSD is read-only because it is at the end of its lifespan or a severe internal error has occurred."
nvme_critical_warning_volatile_memory_backup_device_fail	=	"An error has occurred to the volatile memory backup device in this NVMe SSD."
nvme_percentage_used_full	=	"The Percentage Used value of this NVMe SSD has reached the vendor-specific estimate regarding the percentage of NVM subsystem life consumed. This value is based on actual usage and the manufacturer’s prediction of NVM life."
nvme_remaining_life_reach_user_predefined_level	=	"The estimated endurance of the NVMe SSD is {0}% and has reached the predefined warning level."
other_is_testing	=	"Other testing items in progress"
overview_slot_name_decorator_eunit	=	"Expansion Unit ({0})"
overview_slot_name_decorator_pcie_plugin	=	"PCIe Interface {0} ({1})"
overview_slot_name_lcm_slot	=	"LCM covered cache"
overview_slot_name_native_m_dot_two	=	"Built-In M.2 Slot"
overview_slot_name_sys_slot	=	"System Drive Slot"
overview_status_disk_critical	=	"One or more drives have degraded. We recommend replacing failing drives with healthy ones."
overview_status_disk_disconnect	=	"Unable to detect one or more drives. Please <a target="_blank" href="https://www.synology.com/company/contact_us">contact us</a> for technical support."
overview_status_disk_failing	=	"One or more drives have degraded severely. We recommend backing up data and replacing failing drives with healthy ones immediately."
overview_status_disk_warning	=	"One or more drives have entered warning status. Drive health status requires your attention."
repair_system_partition_window_desc	=	"System partition errors may occur as a result of drive failures or other problems. To repair the system partition on the following drives, click <b>Repair</b>."
reset_block_dlg_checkbox_text	=	"I understand that all the configurations on the selected drive will be erased and cannot be recovered"
reset_block_dlg_desc	=	"The system will erase all the configurations on {0}."
reset_block_title	=	"Reset Drive"
restore_led_light_btn	=	"Restore"
shared_cache_add_drive_wizard_title	=	"Add Drive to SSD Cache Group"
smart_info_modify_warn_title	=	"S.M.A.R.T. attribute (#{0}) failed in the past"
smart_is_testing	=	"S.M.A.R.T. test in progress"
smart_test_modify_warn_title	=	"Previous S.M.A.R.T. tests failed."
ssd_bundle_calculating	=	"The initial estimation may take up to 24 hours"
ssd_bundle_need_more_time	=	"The estimation may take up to 48 hours"
ssd_bundle_option	=	"Enable estimated endurance notification for Synology SSDs"
ssd_bundle_option_info	=	"The estimated endurance is generated based on the recent workloads of the Synology SSD."
ssd_bundle_option_title	=	"Endurance (months)"
ssd_bundle_replace_now	=	"Purchase a new SSD to replace the old one"
ssd_bundle_status_useful_time_desc	=	"This Synology SSD's estimated endurance has dropped to the specified value."
ssd_bundle_status_useful_time_repeat_desc	=	"This SSD may have degraded because its estimated lifespan has dropped again. The estimated lifespan (time-based) notification for this Synology SSD was previously suppressed."
ssd_bundle_status_useful_time_severe_desc	=	"Based on this SSD's recent workloads, its estimated endurance is less than 1 month."
ssd_bundle_time_long	=	"Over 5 years"
ssd_bundle_time_month	=	"month"
ssd_bundle_time_months	=	"months"
ssd_bundle_time_week	=	"week"
ssd_bundle_time_weeks	=	"weeks"
ssd_bundle_time_year	=	"year"
ssd_bundle_time_years	=	"years"
ssd_bundle_useful_time	=	"Estimated endurance"
ssd_bundle_useful_time_desc	=	"This Synology SSD's estimated endurance has dropped to the value you specified. When this SSD reaches its endurance limit, replace it with a new one to ensure data safety."
ssd_bundle_useful_time_severe_desc	=	"This Synology SSD's estimated endurance (time-based) has reached its endurance limit. Back up your data first and replace this SSD with a new one to ensure data safety."
stgmgr_overview_avaliable_slot	=	"Empty Drive Slot"
stgmgr_overview_specific_use_title	=	"Show hot spare/SSD cache"
stgmgr_overview_title_suffix_rear	=	"(Rear)"
stgmgr_overview_usage_sys_disk	=	"for operating system"
stgmgr_overview_usage_unused	=	"Unused"
switch_led_light_btn	=	"Locate"
switch_led_light_desc	=	"After clicking the Locate button, the drive indicator will temporarily switch color. This allows you to instantly identify which drive slot a drive is located in, thereby preventing you from removing the wrong drive by mistake."
switch_led_light_remain	=	"The drive indicator will remain in static orange color for {0} minutes."
switch_led_light_remain_singular	=	"The drive indicator will remain in orange color for {0} minute."
switch_led_light_time	=	"Select how long you want the drive indicator to switch color:"
switch_led_light_title	=	"Locate Drive"
toast_sche_task_exec	=	"Task started."
toast_sche_task_update	=	"Task updated."
wcache_failed_due_to_secure_erase	=	"Operation failed. Please try again after Secure Erase is completed."
wdda_async	=	"An excessive number of asynchronous signal recovery events has been detected on the drive interface within a short period of time. This may indicate a possible signal connectivity issue between the drive and the system. Please make sure that the drive is properly installed in the chassis or drive tray, and that the chassis or tray is properly inserted in your _DISKSTATION_. Afterward, please restart your system. If this issue persists, please contact <a href="https://www.synology.com/support" target="_blank">Synology Technical Support</a> for assistance."
wdda_curr_temp	=	"An abnormal operating temperature has been detected recently. Please check the ambient temperature and make sure the rear ventilation ports are not blocked, or go to <b>Control Panel</b> > <b>Hardware & Power</b> > <b>Fan Speed Mode</b> to change the fan operation settings. If this issue persists, please stop using the drive until the temperature is within the recommended operating range, or contact <a href="https://www.synology.com/support" target="_blank">Synology Technical Support</a>."
wdda_hard_reset	=	"An excessive number of hard reset events has been detected within a short period of time. This may indicate a potential drive and/or system issue. Please make sure that the drive is properly installed in the chassis or drive tray, and that the chassis or tray is properly inserted in your _DISKSTATION_. Afterward, please run the Extended S.M.A.R.T. Self-Test. If this issue persists, please visit the <a href="http://support.wd.com" target="_blank">Western Digital support website</a> for assistance."
wdda_head_load	=	"The drive has accumulated a high amount of head loads throughout its lifetime. Please visit the <a href="http://support.wd.com" target="_blank">Western Digital support website</a> for more information and assistance."
wdda_head_load_r	=	"An excessively high head load rate has been detected. This may wear out the drive over time and result in early drive failure. Please check and adjust the software settings to lower the drive spin-down frequency and the system power on and off frequency to extend the life of the drive. Please visit the <a href="http://support.wd.com" target="_blank">Western Digital support website</a> for more information and assistance."
wdda_high_temp	=	"An abnormally high operating temperature has been detected recently. Please make sure the rear ventilation ports are not blocked, and try to lower the ambient temperature. If the temperature is still high, please go to <b>Control Panel</b> > <b>Hardware & Power</b> > <b>Fan Speed Mode</b> to change the fan operation to a higher speed. If this issue persists, please contact <a href="https://www.synology.com/support" target="_blank">Synology Technical Support</a> for assistance."
wdda_icrc	=	"An excessive number of interface CRC events has been detected during data transmission within a short period of time. This may indicate a potential drive and/or system issue. Please make sure that the drive is properly installed in the chassis or drive tray, and that the chassis or tray is properly inserted in your _DISKSTATION_. Afterward, please restart the system. If this issue persists, please contact <a href="https://www.synology.com/support" target="_blank">Synology Technical Support</a> for assistance."
wdda_low_temp	=	"An abnormally low operating temperature has been detected recently. Please try to increase the ambient temperature or go to <b>Control Panel</b> > <b>Hardware & Power</b> > <b>Fan Speed Mode</b> to change the fan operation to a lower speed. If this issue persists, please contact <a href="https://www.synology.com/support" target="_blank">Synology Technical Support</a> for assistance."
wdda_mech_fail	=	"An excessive number of mechanical failures has been detected within a short period of time. This may prevent the drive from operating normally. Please run the Extended S.M.A.R.T. Self-Test. If this issue persists, please visit the <a href="http://support.wd.com" target="_blank">Western Digital support website</a> for assistance."
wdda_power_hours	=	"The drive has accumulated a high number of power-on hours throughout its lifetime. Please visit the <a href="http://support.wd.com" target="_blank">Western Digital support website</a> for more information and assistance."
wdda_power_reset	=	"The drive has accumulated many power-on events throughout its lifetime. Powering on and off the system frequently affects the drive, and will in turn wear out the drive over time. Please visit the <a href="http://support.wd.com" target="_blank">Western Digital support website</a> for more information and assistance."
wdda_power_reset_r	=	"An excessive number of power-on and power-off events has been detected within a short period of time. Powering on and off the system frequently affects the drive, and will in turn wear out the drive and cause early drive failure. Please lower this frequency to extend the life of your drive. Please visit the <a href="http://support.wd.com" target="_blank">Western Digital support website</a> for more information and assistance."
wdda_read_recovery	=	"An excessive number of read-recovery events has been detected within a short period of time. This occurs when the system requests data and the drive must go through multiple read recovery attempts to fully read the requested data. This may indicate a potential drive and/or system environment issue. Please make sure that the drive is properly installed in the chassis or drive tray, and that the chassis or tray is properly inserted in your _DISKSTATION_. Afterward, please run the Extended S.M.A.R.T. Self-Test. If this issue persists, please visit the <a href="http://support.wd.com" target="_blank">Western Digital support website</a> for assistance."
wdda_reallocate	=	"An excessive number of reallocated sector events has been detected within a short period of time. This occurs when a drive determines that a location on the media should no longer be used for storing data and therefore moves the data to another location on the media. This may indicate a potential drive and/or system issue. Please run the Extended S.M.A.R.T. Self-Test. If this issue persists, please visit the <a href="http://support.wd.com" target="_blank">Western Digital support website</a> for assistance."
wdda_soft_reset	=	"An excessive number of soft reset events has been detected within a short period of time. This may indicate that one or more commands sent to the drive was unsuccessful and was interrupted by the system. Therefore, a potential drive and/or system issue may have occurred. Please make sure that the drive is properly installed in the chassis or drive tray, and that the chassis or tray is properly inserted in your _DISKSTATION_. Afterward, please run the Extended S.M.A.R.T. Self-Test. If this issue persists, please visit the <a href="http://support.wd.com" target="_blank">Western Digital support website</a> for assistance."
wdda_unc	=	"An excessive number of uncorrectable error events has been detected within a short period of time. This may be because the system is requesting the data that the drive cannot fully read, and may indicate a potential drive and/or environmental issue. Please make sure your drive is properly installed in the chassis or drive tray, and that the chassis or tray is properly inserted in your _DISKSTATION_. Please make sure your _DISKSTATION_ is placed on a stable surface, and then run the Extended S.M.A.R.T. Self-Test. If this issue persists, please visit the <a href="http://support.wd.com" target="_blank">Western Digital support website</a> for assistance."
wdda_work_load	=	"The drive has accumulated a high amount of data access counts throughout its lifetime. Reading the data on and writing data to a drive may cause the drive to wear out over time. Please visit the <a href="http://support.wd.com" target="_blank">Western Digital support website</a> for more information and assistance."
wdda_work_load_r	=	"An excessively high read/write rate has been detected. This may accelerate the wear out of the drive and result in early drive failure. Please lower the drive data access rate to extend the life of the drive. Please visit the <a href="http://support.wd.com" target="_blank">Western Digital support website</a> for more information and assistance."

[dmz]
dmz	=	"DMZ"
dmz_desc	=	"DMZ allows you to expose one server to the Internet, so that all the inbound packets will be redirected to it. It is useful if your server is running applications that use uncertain incoming ports."
dmz_err	=	"Failed to enable DMZ."
dmz_hint	=	"You will not be able to reach _DISKSTATION_ via the Internet once DMZ is configured."
dmz_host_ip	=	"DMZ Host IP address"
dmz_host_ip_err	=	"Please input the correct DMZ Host IP address"
dmz_host_range_err	=	"DMZ host ip should be in Local Network range."
dmz_mode	=	"Mode"
dmz_setting	=	"DMZ Settings"
dmz_switch	=	"Enable DMZ"
mode_device	=	"Devices"
mode_ip	=	"IP"

[docker]
docker_share_delete_feasibility_check	=	"Container Manager requires this shared folder. To delete this shared folder, you need to uninstall the package."
docker_share_move_feasibility_check	=	"Container Manager requires this shared folder. To move this shared folder, you must disable the package first."
docker_share_offline_feasibility_check	=	"Container Manager: The package is using a shared folder on this volume. Go to Package Center and stop Container Manager first."
docker_share_rename_feasibility_check	=	"Container Manager requires this shared folder. To rename this shared folder, you must uninstall the package first."
docker_share_transform_container_export_feasibility_check	=	"Container Manager is currently using this shared folder. To convert this folder, please wait until the container [{0}] export finishes."
docker_share_transform_container_import_feasibility_check	=	"Container Manager is currently using this shared folder. To convert this folder, please wait until the container import finishes."
docker_share_transform_feasibility_check	=	"Container Manager is currently using this shared folder. To convert this folder, please uninstall the package."
docker_share_transform_image_export_feasibility_check	=	"Container Manager is currently using this shared folder. To convert this folder, please wait until image [{0}] export finishes."
docker_share_transform_image_import_feasibility_check	=	"Container Manager is currently using this shared folder. To convert this folder, please wait until the image import finishes."
docker_share_transform_occupation_feasibility_check	=	"Container Manager is currently using this shared folder. The shared folder is mounted by container [{0}]. To convert this folder, please unmount the shared folder."

[domain]
all_interface	=	"All network interfaces"
check_dc	=	"Check if the connection works properly between Synology NAS and Active Directory server"
check_hostname_conflict	=	"Check if conflicting hostnames exist in the subnet"
check_krb	=	"Check if the connection works properly between Synology NAS and Kerberos server"
check_ldap	=	"Check if the connection works properly between Synology NAS and LDAP server"
check_mtu	=	"Check if the MTU is configured correctly to ensure the connection works properly between _DISKSTATION_ and domain controller"
check_time_synced	=	"Check if the time is synced between Synology NAS and the domain"
dcip_tip	=	"Specify one or more domain controllers' (DCs) IP addresses or Fully Qualified Domain Names (FQDNs). This _DISKSTATION_ will directly communicate with them."
deprecated_nt4	=	"Windows NT 4 domains have been deprecated. If your domain controller is running Windows 2000 or above, please leave the domain and try joining this _DISKSTATION_ to it again."
direct_connect_trust	=	"Obtain trusted domain data directly from corresponding domains"
disable_admin	=	"Disable permissions for Domain Administrators"
distribution_group	=	"Distribution"
dns_register_nic	=	"Register DNS interface"
domain_ldap_conflict	=	"This _DISKSTATION_ cannot be joined to any LDAP directory because it is already a domain client."
domain_local_group	=	"Domain local"
domain_nested_group	=	"Nested group levels"
domain_not_joined_err	=	"_DISKSTATION_ has not joined any domain yet. Join now?"
domain_options_sync_time	=	"Synchronize with an NTP server every time a domain user signs in"
domain_options_sync_time_enable_warn	=	"This option forces synchronization of the time between the _DISKSTATION_ and the NTP server at each login, which may reduce overall system performance. Therefore, we suggest enabling this option only when time syncing with the domain does not function normally."
domain_privilege	=	"Domain Privileges"
domain_status_test	=	"Domain Status Check"
domain_test_failed	=	"Get more information on domain status check from {0}."
domain_test_item	=	"Check Items"
domain_test_status	=	"Status"
domain_user_home_enable	=	"Enable home service for domain users"
domain_user_home_notice	=	"Enabling this option will also enable home service for local users."
enable_admin_fail	=	"Failed to grant administrator permissions for Enterprise and Domain Admins."
enable_ascii_password	=	"Use ASCII password for registered Computer Account"
enable_domain_client_signing	=	"Enable client-side signature"
enable_domain_server_signing	=	"Enable server signing"
enable_rpc_enum_usergroup	=	"Get user/group lists with NT4-compatible mode"
enable_rpc_enum_usergroup_warn	=	"If you enable this option, this _DISKSTATION_ will get domain data through the NT4 RPC mode. An NT4 domain is a legacy directory service, thus providing fewer features for domain services. To ensure that complete user/group data can be obtained, we suggest enabling this option only when updating user/group data fails or takes too much time."
enable_select_ou	=	"Specify OU"
encrypt_ad_ldap	=	"LDAP encryption"
error_enum_permission	=	"Failed to read shared folder permission settings of this group. Please set the privileges again."
failed_load_group	=	"Failed to load the domain group list"
failed_load_user	=	"Failed to load the domain user list."
full_name	=	"Full Name"
fully_qualified_domain_name	=	"Fully Qualified Domain Name"
general_fieldset_title	=	"Domain information"
global_group	=	"Global"
in_gluster_domain_msg	=	"This device is a cluster computing server. Do you want to set up {0} manually?"
join_alert	=	"Unable to join this domain due to the following reason:"
join_confirm	=	"Joining this domain will affect the following services. Do you want to proceed?"
leave_alert	=	"You cannot leave or change this domain due to the following reasons:"
leave_confirm	=	"If you leave or change this domain, the following services will be affected. Do you want to continue?"
need_samba_service	=	"Please go to {0} and make sure {1} has been installed and enabled"
no_trusted_domain	=	"No trusted domain"
nt4_not_support	=	"Windows NT 4 domains are not supported."
ou_candidate_tip	=	"If this _DISKSTATION_ was joined to the target domain before, you may only be able to select the OU you previously joined. To make all OUs selectable, please remove the machine account of this _DISKSTATION_ from the domain controller first."
rejoin	=	"Rejoin Domain"
remind_modification_after_leave_domain	=	"Please update the settings of DNS server and NTP server after leaving the domain to make sure that DSM can correctly connect to the Internet."
rwdc_desc	=	"To join your Synology NAS to a read-only domain controller (RODC), you must specify the IP address of your read-write domain controller (RWDC)."
rwdc_ip	=	"RWDC IP address"
schedule_fieldset_title	=	"Domain update schedule"
schedule_manual	=	"No schedule"
schedule_month_date	=	"Date"
schedule_start_hour	=	"Time"
security_group	=	"Security"
select_domain	=	"Select Domain"
select_domain_desc	=	"Select domains whose data you want to replicate"
select_domain_title	=	"Select domains"
specified_ou	=	"Register machine on OU"
specified_ou_desc	=	"Please select an OU to which you wish to register your machine."
systemchangenotice_desc	=	"<ul style="list-style-position: inside; list-style-type: disc;"><li>The DNS settings were set to point to the domain controller.</li><li>The time setting of the NTP service of this _DISKSTATION_ was set to synchronize with the domain controller.</li><li>The SMB workgroup name was set to be the same as the domain name and cannot be changed.</li><li>Domain administrators have become administrators in this _DISKSTATION_.</li></ul>"
systemchangenotice_title	=	"Please note that some system settings were changed as follows:"
trusted_domain_management	=	"Trusted Domain Management"
universal_group	=	"Universal"
warn_cant_leave_by_ad_mode	=	"You cannot remove this _DISKSTATION_ from the domain because Synology Directory Server has been activated."
warr_cant_disable_due_to_service	=	"This option cannot be disabled because Synology Directory Server has been enabled."

[download]
add_download_queue	=	"Added "{0}" to Download Queue."
add_file_download_queue	=	"Added {0} files to Download Queue."
add_filefoler_download_queue	=	"Added {0} files or folders to Download Queue."
download_btn_cancel	=	"Cancel"
download_btn_change	=	"Change"
download_btn_clear	=	"Clear"
download_btn_end	=	"End"
download_btn_help	=	"Help"
download_btn_new	=	"Create"
download_btn_ok	=	"OK"
download_btn_refresh	=	"Refresh"
download_btn_remove	=	"Remove"
download_btn_resume	=	"Resume"
download_btn_stop	=	"Pause"
download_cap_new_download	=	"Create"
download_cfrm_remove	=	"Are you sure you want to remove the download task?"
download_complete	=	"Download completed."
download_completed	=	"Download "{0}" successfully."
download_dl_not_enabled	=	"Download Service is disabled."
download_dsm_notification	=	"{0} task {1} is finished."
download_empty_input_file	=	"Please open the file to create."
download_empty_input_url	=	"Please enter the URL."
download_end_confirm	=	"Are you sure you want to end this task?"
download_end_desc	=	"This feature is mainly designed for those tasks which cannot be completed or encountered unknown errors."
download_end_note_finished	=	"You cannot end this task because the download is complete."
download_end_note_no_file	=	"You cannot end this task because the download has not yet started."
download_end_warning	=	"Files in this task will be stopped and moved to the selected shared folder. You cannot resume/restart this task after it's being moved."
download_err_network	=	"Failed to establish network connection."
download_err_no_file_to_end	=	"File(s) not found."
download_err_no_privilege	=	"You have no right to see current task."
download_err_no_such_task	=	"Invalid task ID or task has been deleted."
download_err_read_torrent_fail	=	"Failed to read the torrent file."
download_err_select_num	=	"You can only select one task."
download_error_no_torrent_info_from_magnet	=	"Failed to obtain torrent file info from the magnet link."
download_error_server_error	=	"Unexpected error occurred!"
download_error_share_not_found	=	"No writeable shared folder found."
download_error_user_removed	=	"The account %1 does not exist or has been removed."
download_error_wrong_file_format	=	"Incorrect file format."
download_error_wrong_files_format	=	"The format of {0} file(s) is invalid."
download_error_wrong_url	=	"The URL should start with http://, https://, or ftp://."
download_failed	=	"Failed to download."
download_file_completed	=	"Download {0} files successfully."
download_file_failed	=	"Failed to download "{0}"."
download_filefoler_completed	=	"Download {0} files or folders successfully."
download_lbl_input_file	=	"Open a file"
download_lbl_input_url	=	"Enter URL"
download_leechers	=	"Leechers"
download_list_completed	=	"Downloaded"
download_list_connected_peers	=	"Connected Peers"
download_list_created_time	=	"Created time"
download_list_dest_folder	=	"Destination"
download_list_down_rate	=	"Download Speed"
download_list_downloaded_pieces	=	"Downloaded Pieces"
download_list_filename	=	"File name"
download_list_filesize	=	"File size"
download_list_peer	=	"Peers"
download_list_progress	=	"Progress"
download_list_speed	=	"Speed"
download_list_started_time	=	"Start Time"
download_list_status	=	"Status"
download_list_total_pieces	=	"Total Pieces"
download_list_transfered	=	"Transfered"
download_list_upload_rate	=	"Upload Speed"
download_list_url	=	"URL"
download_list_username	=	"User name"
download_msg_action_failed	=	"Failed to finish the requested operation."
download_msg_ask_help2	=	"Please consult the system administrator to solve this problem."
download_msg_end_done_del_err	=	"Successfully ended the selected task. However, system failed to remove the download task.  Please remove the task manually."
download_msg_invalid_user	=	"Invalid user."
download_msg_reach_limit	=	"Number of download tasks has reached the maximum limit."
download_next_page	=	"Next"
download_orgtorrent_desc	=	"Download original torrent file"
download_orgtorrent_field	=	"Original torrent file"
download_previous_page	=	"Previous"
download_redirect_confirm	=	"Download Station is not enabled. Do you want to configure the Download Station settings?"
download_seed_days	=	"days"
download_seed_elapsed	=	"Seeding elapsed"
download_seed_hours	=	"hours"
download_seed_mins	=	"minutes"
download_seed_seconds	=	"seconds"
download_seeders	=	"Seeders"
download_status_not_available	=	"Not available"
download_status_unknown	=	"Unknown"
download_subject	=	"Download"
download_table_heading_file	=	"File"
download_table_heading_general	=	"General"
download_table_heading_setting	=	"Settings"
download_table_heading_transfer	=	"Transfer"
download_task_broken_link	=	"Broken Link"
download_task_dest_deny	=	"Shared folder access denied."
download_task_dest_not_exist	=	"Shared folder not found."
download_task_disk_full	=	"Disk is full"
download_task_downloading	=	"Downloading"
download_task_error	=	"Error"
download_task_finished	=	"Completed"
download_task_finishing	=	"Finishing"
download_task_hash_checking	=	"Checking"
download_task_paused	=	"Paused"
download_task_preseeding	=	"Prepare seeding"
download_task_quota_reached	=	"Quota reached."
download_task_seeding	=	"Seeding"
download_task_timeout	=	"Connection Timeout"
download_task_waiting	=	"Waiting"
download_time_left	=	"Time Left"
download_tip_change	=	"Download Destination"
download_tip_clear	=	"Clear completed items"
download_tip_end	=	"End incomplete/erroneous items"
download_tip_help	=	"Help"
download_tip_new	=	"Create new download"
download_tip_refresh	=	"Refresh"
download_tip_remove	=	"Remove"
download_tip_resume	=	"Resume"
download_tip_stop	=	"Pause"
download_total_rate	=	"Total Download"
download_unselect_file	=	"The number of uploading files exceeds the maximum. The last file is unselected."
download_unselect_files	=	"The number of uploading files exceed the maximum. The last {0} files are unselected."
download_upload_erro_files	=	"The content of {0} file(s) is invalid."
download_upload_exceed_maximum_filesize	=	"The size of following file(s) exceeds {0}"
download_upload_zerobyte_filesize	=	"The following files will not be uploaded because the file size is either 0 KB or over {0}, or unknown error occurs when the files are added to the upload list."
download_warning	=	"Warning"
download_warning_select_items	=	"Please select item(s)."
download_warning_select_share	=	"First choose the destination shared folder."
temporary_location	=	"Temporary location"
title_download_manager	=	"BT/HTTP/FTP/NZB"
title_enable_bt_http_ftp_nzb	=	"Enable BT/HTTP/FTP/NZB downloads"
title_enable_emule	=	"Enable eMule downloads"
upload_browse	=	"Browse"
user_no_share_folder	=	"You don't have access privilege to any shared folder. Please contact the administrator."
volume_no_enough_free_space	=	"There is not enough free space on this volume. (At least {0} is required.)"

[drive]
feasibility_delete_volume	=	"Drive is using this volume. Please uninstall the package before deleting this volume."

[dsmnotify]
badge	=	"Badge"
brief_desc	=	"Control whether to receive DSM desktop notifications for each service listed below. "
clearall	=	"Clear All"
dd_desc	=	"Drag and drop services to arrange them into your desired order."
empty_text	=	"No notifications"
error_msg	=	"The message is no longer available."
error_title	=	"Unavailable"
hint	=	"Hint"
new_message	=	"You have {0} unread notifications."
service	=	"Service"
sort_by	=	"Sort"
system_event	=	"System Event"
time	=	"By time"
title	=	"Notifications"
title_setting	=	"Notification Settings"

[dsmoption]
disable_dsm_notification	=	"Disable desktop notification"
error_background_size	=	"File size exceeds the 25 MB limit."
error_format	=	"Unsupported format."
error_logo_size	=	"File size exceeds the 1MB limit."
error_size	=	"File size exceeds the 1MB limit."
external_dns_or_ip	=	"Hostname or static IP"
external_port_desc_1	=	"Provide the hostname or static IP address, along with the port (only if different from default), for _DISKSTATION_ to generate the URL for external access, such as for file sharing. <a href="https://sy.to/file-sharing-url-setup" target="_blank">Learn more</a>"
external_port_dsm	=	"_OSNAME_"
external_port_label	=	"Router Port"
external_port_photo	=	"Photo Station"
login_apply_preview	=	"Do you want to apply the settings?"
login_background	=	"Background"
login_background_position_center	=	"Center"
login_background_position_fill	=	"Fill"
login_background_position_fit	=	"Fit"
login_background_position_stretch	=	"Stretch"
login_background_position_tile	=	"Tile"
login_customize_background	=	"Customize background"
login_logo	=	"Logo"
login_logo_customize	=	"Customize logo"
login_logo_position	=	"Position"
login_portal_label	=	"Login Portal"
login_preview	=	"Preview"
login_remove	=	"Remove"
login_settings_label	=	"Login Settings"
login_style1	=	"Style 1"
login_style2	=	"Style 2"
login_style3	=	"Style 3"
login_style4	=	"Style 4"
login_style5	=	"Style 5"
login_style6	=	"Style 6"
login_style_desc	=	"Customize the appearance of the _OSNAME_ login screen."
login_style_label	=	"Login Style"
login_style_messages	=	"Messages"
login_style_messages_desc	=	"Configure the welcome message and footer message displayed on the login page."
login_template	=	"Template"
login_title_background	=	"Title and Background"
login_upload_image	=	"Upload image"
loginstyle_dsm_description	=	"DSM and certain applications have separate login pages. You can customize the style of login pages by clicking on the images below."
loginstyle_editor_header	=	"Login Style"
loginstyle_hint_set_portal	=	"Application login pages require enabling additional alias, ports, or domains. Make sure you have completed the settings in the <b>Web Services</b> tab."
loginstyle_package_title	=	"Applications"
prompt_background_size	=	"The maximum file size allowed is 25 MB."
prompt_size	=	"The limit of maximum file size is 1MB."

[dsmsetting]
allow_2fa_device_lost	=	"Enable users to sign in using an emergency verification code sent via email for 2-factor authentication"
allow_stay_signed_in	=	"Allow users to stay signed in on web browsers"
allow_trust_device_2fa	=	"Allow users on web browsers to skip 2-factor authentication by trusting devices"
allowurls	=	"Allowed websites"
check_frame_options	=	"Do not allow _OSNAME_ to be embedded with iFrame"
cidr	=	"CIDR"
cidr_or_hostname	=	"CIDR/Hostname"
customize_msg	=	"Tick the checkboxes next to the items on the left side to display or hide them."
customize_showhide	=	"Press the Customize button to display or hide items on the left side."
direct_management	=	"Skip Desktop and go to the application directly after login"
disable_session_srcip	=	"Enhance browser compatibility by skipping IP checking"
dsm_miniheader	=	"Use mini banner"
dsm_timeout_legend	=	"Logout Timer"
dsm_token	=	"Improve protection against cross-site request forgery attacks"
enable_csp_header	=	"Improve security with HTTP Content Security Policy (CSP) header"
footer_enable_html	=	"Render HTML in footer message"
footer_msg	=	"Footer message"
frame_options_allow_url	=	"Allow specific websites to embed _OSNAME_ with iFrame"
login_display_dsm_logo	=	"Display DSM logo"
login_page_title	=	"Login Page Title"
login_title	=	"Login page title"
notify_ip_change	=	"Show notification on _OSNAME_ desktop when the current IP changes"
qrcode	=	"QR Code Login"
restart_clean_session	=	"Clear all saved user login sessions upon system restart"
session_legend	=	"Security"
session_security_desc	=	"Enable this option to provide better compatibilities for browsers behind a proxy server, but it will lower the security level."
show_search	=	"Show the quick search box"
start_complete	=	"Display the Home page in complete mode"
theme	=	"Theme"
theme_business	=	"Dark"
theme_default	=	"Light"
theme_refresh_page	=	"The selected theme will be applied after you refresh the webpage. Would you like to refresh the webpage now?"
timeout_desc	=	"Set up a browser automatic logout timer for _OSNAME_ including the web applications."
timeout_field	=	"Logout timer (minutes)"
trusted_proxies	=	"Trusted Proxies"
trusted_proxies_desc	=	"When a user is connecting through a trusted proxy server, _OSNAME_ will use the client IP address provided by that proxy server."
uioptions	=	"Preferences"
welcome_msg	=	"Welcome message"
welcome_title	=	"Welcome title"

[error]
clip_failed	=	"Failed to copy to clipboard."
close_subject	=	"Closing the window"
codec_activation_failed	=	"Music or videos don't play or display properly because the given codec is not successfully activated. Please check your Internet connection."
codec_activation_need_update	=	"Music or videos don't play or display properly because the given codec is not successfully activated. Please update {0} to the latest version."
conn_rv_fail	=	"Failed to connect to the remote folder. Please make sure the remote server is accessible via CIFS protocol."
couldnt_resolve_host	=	""
db_connect_fail	=	"Failed to connect to the database. Please try again later."
delete_error_rmdir	=	"Failed to delete the selected files/folders. Please make sure you have appropriate privileges."
demo_mode	=	"This function is not available in the demo mode."
err_bad_server_header	=	""Server" header cannot contain \. Please enter another header."
error_acl_mp_not_support	=	"The mounted folder does not support Windows ACL. Please refer to Help for more information."
error_acl_volume_not_support	=	"The volume where the shared folder is located does not support ACL. Please refer to Help for more information."
error_afp_not_enable	=	"AFP service is not enabled yet."
error_auth	=	"Authorization Required"
error_bad_field	=	"Field value is invalid."
error_cifs_smb1_disabled	=	"Failed to connect to the remote folder because the remote server has disabled SMB1."
error_confirm_timeout	=	"System time-out. Please sign in again."
error_dest_no_path	=	"Destination folder does not exist."
error_empty_name	=	"You must enter a name for the file or folder."
error_encryption_long_path	=	"The name of the encrypted file or folder cannot exceed 143 English characters or 47 Asian (CJK) characters."
error_error	=	"Error"
error_error_reason	=	"Cause"
error_error_system	=	"Unable to perform this operation, possibly because the network connection is unstable or the system is busy. Please try again later."
error_fat_privilege	=	"You cannot modify the options under [Privilege], [Owner] or [Group] because the file is located on a disk formatted in FAT or NTFS."
error_fat_reserved_name	=	"File/folder name cannot contain \/:*?"<>|. Please choose a different name."
error_file_exist	=	"The name is taken. Please choose a different name."
error_files	=	"Error occurred on"
error_folder_busy	=	"Failed to make changes to the folder because it is mounted as a remote folder or virtual drive. Unmount the remote folder or virtual drive and then try again."
error_fs_ro	=	"The selected folder is read-only."
error_hfs_plus_mount_point_nfs	=	"You cannot assign NFS permissions for an HFS+ file system."
error_incompatible_protocol	=	"The requested operation failed. Please go to Backup & Replication > Backup Services to make sure network backup service is enabled and customized rsync configuration is disabled."
error_invalid	=	"Unable to perform this operation. Please try again later."
error_invalid_archive	=	"Not a valid compressed archive."
error_invalid_archive_data	=	"The compressed archive is corrupted."
error_invalid_max_date	=	"The date in this field must be equal to or before {0}"
error_invalid_max_time	=	"The time in this field must be equal to or before {0}"
error_invalid_min_date	=	"The date in this field must be equal to or after {0}"
error_invalid_min_time	=	"The time in this field must be equal to or after {0}"
error_invalid_time_text	=	"{0} is not a valid time"
error_invalid_user_group	=	"Invalid owners or groups. Please select other owners or groups."
error_io	=	"I/O error occurred. Please try again later."
error_load_system_settings	=	"Unable to load system settings, possibly because the network connection is unstable or the system is busy. Please try again later."
error_loginstyle_system_error	=	"Operation failed because of a system configuration error. Please contact Synology Technical Support."
error_long_path	=	"File/folder name should be within 255 characters."
error_mobile_push_service_disconnect	=	"Unable to disable mobile device notifications. Your server may be disconnected from Synology Push Service. Please check the external connection settings of your Synology NAS."
error_mobile_unexpected_login	=	"Unable to perform this operation, possibly because the network connection is unstable or the system is busy. Please try again later."
error_mount_point_change_vol	=	"Failed to change the shared folder's location. Please unmount the virtual drive(s) or remote folder(s) within the shared folder and try again."
error_mount_point_delete	=	"Failed to delete the following shared folder(s): {0}. Please unmount the virtual drive(s) or remote folder(s) within the shared folder(s) and try again."
error_mount_point_encrypt	=	"Failed to encrypt the shared folder. Please unmount the virtual drive(s) or remote folder(s) within the shared folder and try again."
error_mount_point_nfs	=	"Failed to set the NFS permissions for the shared folder(s). Please unmount all remote folder(s) within the shared folder(s) and try again. "
error_mount_point_rename	=	"Failed to rename the shared folder. Please unmount the virtual drive(s) or remote folder(s) within the shared folder and try again."
error_no_path	=	"File or directory does not exist."
error_no_share_access	=	"You are not granted with any shared folder access rights. Please contact system administrator."
error_no_share_to_write	=	"You do not have the appropriate privilege to perform this action."
error_no_shared_folder	=	"No shared folders"
error_nochoosefile	=	"Please choose a file."
error_noshare	=	"The selected shared folder does not exist."
error_overwrite_fail	=	"Failed to overwrite file/folder. Please make sure the file/folder property is the same."
error_page	=	"The page is not found"
error_page_desc	=	"Sorry, the page you are looking for is not found."
error_port_conflict	=	"One of the port numbers is used by another service. Please choose another port range."
error_privilege_not_enough	=	"Sorry, this user account has not been assigned proper privileges to perform this action."
error_quickconnect_network_without_failover_cn_desc	=	"Unable to perform this operation, possibly because the network connection is unstable or the system is busy. Please try again later."
error_quota_not_enough	=	"Your personal data has exceeded the quota."
error_remote_privilege	=	"You are not allowed to modify the file's access privileges because it is within a remote folder."
error_repswd	=	"Inconsistent password. Please enter it again."
error_reserved_name	=	"File and folder names cannot contain colons (:) and slashes (/), start with ._ (e.g. ._name), or use any combination of characters that are reserved for system use (e.g. . or ..). Please enter another name."
error_reset_time	=	"Please reset the system time."
error_rmvnone	=	"You have not selected any item to remove."
error_select_at_least_one	=	"Please select at least one type."
error_select_conflict	=	"Source and destination cannot be the same."
error_select_one	=	"You cannot apply settings to multiple items at the same time."
error_service_datamove_failed	=	"Failed to process the operation. Please check system log."
error_service_start_failed	=	"Failed to start service. Please check system log."
error_service_stop_failed	=	"Failed to stop service. Please check system log."
error_set_system_settings	=	"Unable to perform this operation, possibly because the network connection is unstable or the system is busy. Please try again later."
error_smb_not_enable	=	"SMB service is not enabled yet."
error_space_not_enough	=	"The available drive space of this system is insufficient."
error_subject	=	"Failed to apply the settings."
error_system	=	"This action cannot be completed. Please try again later. If the problem persists, please {0}contact us{1} for technical support."
error_system_abnormal_steps	=	"Critical system errors occurred. Please <a href="https://www.synology.com/company/contact_us" target="_blank">contact us</a> immediately for technical support."
error_system_abnormal_warning	=	"Warning"
error_system_busy	=	"Unable to perform this operation, possibly because the network connection is unstable or the system is busy. Please try again later."
error_system_time	=	"The system time of your _DISKSTATION_ is not correct. Please go to Control Panel > Regional Options to reset the system time."
error_testjoin	=	"Cannot find the specified domain. Please contact the system administrator."
error_timeout	=	"Connection Expired."
error_too_many_folder	=	"The number of folders has reached the maximum limit."
error_unable_conduct_setting	=	"Unable to apply settings, possibly because the network connection is unstable or the system is busy. Please try again later."
error_unable_connect_SMS_provider	=	"Unable to connect to the SMS provider. Please check the external connection settings of your Synology NAS."
error_unexpected_load_settings	=	"Unable to load settings, possibly because the network connection is unstable or the system is busy. Please try again later."
error_unexpected_login	=	"Unable to perform this operation. Please try again later."
error_unknown	=	"Unable to perform this operation. Please sign in to _OSNAME_ and try again later."
error_unknown_desc	=	"Unable to perform this operation, possibly because the network connection is unstable or the system is busy. Please try again later."
error_volume_oversize	=	"Volume size must be under <b>{0}</b>."
error_volume_readonly	=	"The volume is read only."
error_volume_ro	=	"Volume of the destination is read-only. The volume might be crashed. Please contact the system administrator."
external_ip_alert	=	"Failed to launch the service because your _DISKSTATION_ has not retrieved an external IP address. Please click OK to specify a hostname or external IP address at Control Panel > External Access > Advanced."
external_ip_normal_alert	=	"Failed to launch the service because your _DISKSTATION_ has not retrieved an external IP address. Please contact your administrator to set up an external IP address."
external_ip_warning	=	"Failed to launch the service because your _DISKSTATION_ has not retrieved an external IP address. Please sign in to _OSNAME_ as admin (or a user belonging to the administrators group), and specify a hostname or external IP address at Control Panel > External Access > Advanced."
extract_passwd_missing	=	"Password is missing or invalid. Please go to [Options] and enter the password for the encrypted file."
mvcp_file_too_big	=	"File size must be less than 4G."
mvcp_filename_illegal	=	"Filename contains invalid characters."
no_external_devices	=	"No USB storage devices found. Please connect one."
nochange_subject	=	"No settings were changed."
ok_subject	=	"The settings have been completed successfully."
over_account_limit	=	"The number of shared file links exceeds the maximum allowed for your user account. Please remove some links and try again."
quickcnt_alert	=	"Failed to launch the service because your _DISKSTATION_ has not enabled QuickConnect. Click "OK" to set up a QuickConnect ID."
quickcnt_warning	=	"Failed to launch the service because your _DISKSTATION_ has not enabled QuickConnect. Sign in to _OSNAME_ as admin (or a user belonging to the administrators group), and then specify a QuickConnect ID at Control Panel > QuickConnect."
repo_unhealthy	=	"The operation failed. The storage of the virtual machine is currently unavailable. Please go to Storage Manager for more information."
same_password_as_previous	=	"The new password cannot be the same as the old one."
save	=	"Save failed. Please try again later."
sms_provider_exist	=	"This SMS service provider already exists. Please choose a different one."
sms_provider_not_found	=	"This SMS service provider cannot be found. Please choose a different one and try again."
target_busy	=	"System busy. Please try again later."
unable_to_perform_operation	=	"Unable to perform this operation. Please try again later."
unknown_db_error	=	"Unknown database error."
upload_folder_error	=	"An error occurred because one or more folders are among the items you are uploading."
volume_creating	=	"Volume is being created in your system. Click "OK" to launch "Storage Manager" and check volume status."
volume_no_volumes	=	"There is no volume in your system. Click [OK] to launch Storage Manager and create a new volume."
webhook_provider_exist	=	"This webhook provider already exists. Please choose a different one."
webhook_provider_not_found	=	"This webhook provider cannot be found. Please choose a different one."

[extend_warranty]
being_verified_desc	=	"Your order is being verified. Check the progress in {0}Synology Account{1}."
cant_register_for_ew201	=	"Extended Warranty Plus will not be available if you already registered for another extended warranty service."
check_expansion	=	"For the information on the extended warranty for your expansion units, please check on your {0}Synology Account{1}."
checking	=	"Checking..."
desc	=	"Description"
doesnot_support	=	"Your _DISKSTATION_ does not support Extended Warranty Plus. {0}Learn more{1}"
eligible_only_90_days	=	"You can register for Extended Warranty Plus only within a limited time period after your _DISKSTATION_ purchase."
exceed_period_desc	=	"This device is no longer eligible for Extended Warranty Plus, or its proof of purchase you provided is invalid. Check the conditions on {0}this webpage{1}."
expired	=	"Expired"
expiry_date	=	"Valid until"
have_registered_ew201_desc	=	"This device is already registered for EW201/EW202 and is ineligible for Extended Warranty Plus registration. Please go to your {0}Synology Account{1} to check your extended warranty information."
not_eligible	=	"Ineligible"
not_registered	=	"Not registered"
note	=	"Note"
register_again	=	"Register Again"
register_and_sign_in_desc	=	"Register for {0}Extended Warranty Plus{1} to extend your product warranty for an extra 2 years and receive expedited and even advanced replacement services. Sign in to your {2}Synology Account{3} to check your Extended Warranty Plus status."
register_now	=	"Register Now"
register_sc_from_now	=	"Register for {0}Extended Warranty Plus{1} to extend your product warranty for an extra 2 years and receive expedited and even advanced replacement services."
registered	=	"Activated"
service_location	=	"Service Location"
service_location_tooltip	=	"If your _DISKSTATION_ requires any warranty services, send your _DISKSTATION_ to the specified address based on the location you selected. {0}Check the supported locations{1}"
service_status	=	"Status"
synology_care	=	"Extended Warranty Plus"
verified_but_not_complete_desc	=	"Your order was canceled. Go to {0}Synology Account{1} to review the original order and register again."
waiting_for_payment_desc	=	"Your order is waiting for payment. Go to {0}Synology Account{1} to review the order and complete the payment."

[externaldevice]
externaldevice_available_space_warning	=	"Running out of available space."
externaldevice_default_permission	=	"Default Permissions"
externaldevice_default_permission_dialog_desc	=	"You can set the default permissions for newly inserted external devices on this page. If you want to modify the permission of each connected external device, please go to <b>Control Panel</b> > <b>Shared Folder</b>. The permissions specified there will have higher priority and will overwrite the settings here."
externaldevice_default_permission_dialog_desc_router	=	"You can set the default permissions for newly inserted external devices on this page. If you want to modify the permission of each connected external device, please go to <b>Control Panel</b> > <b>Shared Folder</b>. The permissions specified there will have higher priority and will overwrite the settings here."
externaldevice_default_permission_setting_dialog_title	=	"Set default permission for newly inserted USB Disk"
externaldevice_format_entire_disk	=	"Entire disk"
externaldevice_format_entire_disk_desc	=	"Warning: All data on the selected disk will be erased!"
externaldevice_format_option	=	"Formatting Option"
externaldevice_format_selected_partition	=	"Selected partition"
externaldevice_global_settings	=	"External Devices Settings"

[extract]
7z_extract	=	"Download and archive multiple files using 7z format"
extract_file_exist	=	"Failed to create the folder. The same file or folder name already exists."

[ezinternet]
confirm_change_ddns_hostname	=	"Your DDNS hostname will be changed. Are you sure?"
dhcp_warn_public_IP	=	"Your network administrator needs to assign a public IP address to your _DISKSTATION_."
ezinternet_apply_ddns_use	=	"DDNS Setting"
ezinternet_apply_desc	=	"Applying the following setting:"
ezinternet_apply_error	=	"Failed to apply the settings."
ezinternet_apply_firewall	=	"Firewall Settings"
ezinternet_apply_portfwd	=	"Port Forwarding"
ezinternet_apply_pppoe	=	"PPPoE Settings"
ezinternet_apply_routerconf	=	"Connect to your router"
ezinternet_apply_static_ip	=	"Set up Static IP"
ezinternet_apply_title	=	"Apply Settings"
ezinternet_auto_detection	=	"Network Map Auto Configuration"
ezinternet_auto_detection_congratulation_ap	=	"Congratulations! Your _DISKSTATION_ has been configured as a wireless AP bridged to your local network and connected to the Internet successfully."
ezinternet_auto_detection_congratulation_router	=	"Congratulations. Your _DISKSTATION_ has been configured as a wireless router and connected to the Internet successfully."
ezinternet_auto_detection_congratulation_sta	=	"Congratulations. Your _DISKSTATION_ has joined a wireless network."
ezinternet_auto_detection_prompt	=	"Your network configuration has been modified. Using auto configuration might overwrite the current settings. Do you want to continue?"
ezinternet_congratulation	=	"Congratulations. You have successfully connected to the Internet."
ezinternet_conn_desc	=	"Select a method to connect to your _DISKSTATION_ over the Internet"
ezinternet_conn_title	=	"Internet Connection"
ezinternet_ddns_opt_desc	=	"How do you want to set up your DDNS?"
ezinternet_ddns_opt_skip	=	"Skip this step"
ezinternet_ddns_opt_title	=	"DDNS Setup Wizard"
ezinternet_ddns_opt_use	=	"Use an existing hostname from your DDNS provider"
ezinternet_ddns_reg_title	=	"DDNS Setup Wizard (Register)"
ezinternet_ddns_use_desc	=	"Set up DDNS service information"
ezinternet_ddns_use_title	=	"Use an existing hostname"
ezinternet_direct_conn_long	=	"Connect using DSL or cable modem or LAN that does not require username and password."
ezinternet_direct_conn_long_1	=	"My _DISKSTATION_ is connected to a DSL or cable modem, or directly assigned a public IP address from my Internet service provider (ISP)."
ezinternet_direct_conn_short	=	"Directly connect to the Internet"
ezinternet_direct_conn_short_1	=	"PPPoE or Direct Connection"
ezinternet_firewall_chkbox	=	"Enable firewall to block incoming connections"
ezinternet_firewall_desc	=	"Select the services you want to unblock."
ezinternet_firewall_popwarn	=	"The following services have not been allowed access: {0} <br>In this case, you will not be able to access the _DISKSTATION_ using its hostname or Synology Assistant. Do you want to continue?"
ezinternet_firewall_title	=	"Firewall Setup"
ezinternet_firewall_warning	=	"The settings will overwrite the current firewall rules for {0}."
ezinternet_how_to_network	=	"How does your _DISKSTATION_ connect to the Internet?"
ezinternet_long_desc	=	"Connect to the Internet easily"
ezinternet_mode_selection	=	"Your _DISKSTATION_ can't connect to the Internet successfully. Please select the network mode for your _DISKSTATION_."
ezinternet_mode_selection_ap	=	"Your _DISKSTATION_ will work as a wireless AP bridged to your local network, and will connect to the Internet via a router."
ezinternet_mode_selection_ap_router	=	"*Please go to Control Panel > Wireless and set your _DISKSTATION_ as a wireless router or wireless AP."
ezinternet_mode_selection_ap_title	=	"Wireless AP"
ezinternet_mode_selection_router	=	"_DISKSTATION_ will work as a wireless router and connect to the Internet via DSL/Cable modem."
ezinternet_mode_selection_router_title	=	"Wireless Router"
ezinternet_mode_selection_sta	=	"*Please configure your _DISKSTATION_ to join wireless network in Control Panel > Network > Network Interface > Network Map Configuration."
ezinternet_port_fwd_desc	=	"Select the services and applications that you would like to access over the Internet."
ezinternet_port_fwd_title	=	"Manual Router Setup"
ezinternet_pppoe_conn_long	=	"Connect using a DSL or cable modem that requires username and password."
ezinternet_pppoe_conn_short	=	"Broadband (PPPoE)"
ezinternet_pppoe_desc	=	"Please enter the account information from your Internet Service Provider (ISP)."
ezinternet_pppoe_title	=	"PPPoE Setting"
ezinternet_router_conf_title	=	"UPnP Router Found"
ezinternet_router_conn_long	=	"Connect to a router, and set up port forwarding."
ezinternet_router_conn_long_1	=	"My _DISKSTATION_ is connected to a router used to share the Internet connection."
ezinternet_router_conn_short	=	"Through a router"
ezinternet_router_info	=	"If your router is not listed here, you can still set up port-forwarding rules manually on your router to allow _DISKSTATION_ access from the Internet. For more information, please refer to {0}this article{1} to see what network ports are used by Synology services."
ezinternet_router_natpmp_conf_title	=	"Apple Base Station Found"
ezinternet_setup_pppoe_connection	=	"Set up a PPPoE connection"
ezinternet_short_desc	=	"EZ-Internet"
ezinternet_specify_manual_private_ip	=	"Specify a local IP address to set up port forwarding on router (recommended)"
ezinternet_specify_manual_public_ip	=	"Specify a public IP address"
ezinternet_static_ip_conf_desc	=	"Static IP is required before configuring the router. The following settings will be applied."
ezinternet_static_ip_conf_title	=	"Network Setup"
ezinternet_summary_ddns	=	"DDNS settings"
ezinternet_summary_firewall	=	"Firewall setting"
ezinternet_summary_portfwd	=	"Port forwarded applications"
ezinternet_summary_pppoe	=	"PPPoE setting"
ezinternet_summary_routerconf	=	"Router configuration"
ezinternet_summary_static_ip_conf	=	"Static IP settings"
ezinternet_summary_title	=	"Confirm Settings"
ezinternet_welcome	=	"EZ-Internet helps configure your network so you'll be able to access the _DISKSTATION_ over the Internet. We'll configure the following:<p><ul><li>Internet connection</li> <li>Router port forwarding</li> <li>_DISKSTATION_ Firewall</li> <li>_DISKSTATION_ DDNS service (e.g. myname.synology.me)</li></ul>"
ezinternet_welcome_air	=	"The Synology EZ-Internet Wizard will assist you in setting up remote Internet access to _DISKSTATION_. You will be guided through the following settings:<p><ul><li>Set up Internet connection</li> <li>Set up port forwarding</li> <li>Set up firewall</li> <li>Set up DDNS service</li> <li>Set up Wireless LAN</li></ul>"
ezinternet_welcome_title	=	"Welcome to Synology EZ-Internet Wizard"
ezinternet_wizard_title	=	"EZ-Internet Wizard"
manual_warn_public_IP	=	"Please enter a public IP address."
pppoe_warn_router_passthrough	=	"Only select this option if your router supports PPPoE pass-through."
service_ddns_synology_use	=	"Use a free DDNS domain name provided by Synology"
warn_usb_modem_private_ip	=	"EZ-Internet has detected you are connecting via mobile broadband and a private IP address is assigned. Network settings cannot be configured in this environment."
wired_directlink_msgbox_warn_public_IP	=	"Your _DISKSTATION_ needs to get a public IP address to continue. If you don't have one, please contact your network administrator for help. If you have a router at home, please go to the previous step and choose 'Through a router' to continue."
wireless_directlink_msgbox_warn_public_IP	=	"Your _DISKSTATION_ needs to get a public IP address to continue. If you don't have one, please contact your network administrator for help. If you have a router at home, please go to the previous step and choose 'Wireless AP' to continue."

[favorite]
my_favorite	=	"My Favorites"
over_limit	=	"The number of "My Favorites" shortcuts has reached the maximum limit (256). Please remove some shortcuts and try again."
same_favorite_name	=	"Failed to add to My Favorites. Another favorite with the same name "{0}" already exists."
same_favorite_path	=	""{0}" has been added to My Favorites with the name "{1}"."

[fbbrower]
open_folder	=	"Open containing folder"

[feedback]
feedback_form_idle_long_time	=	"You have been idle for over 60 minutes. Please refresh this page and try again."
feedback_form_need_cookie_enable	=	"An error occured while receiving your feedback. Please enable browser cookies (including third-party cookies) and refresh this page before trying again."
feedback_form_session_error	=	"An error occured while receiving your feedback. Please refresh this page and try again."
feedback_form_too_much_feedback	=	"The server is busy. Please try again in 30 minutes."

[file]
error_bad_file_content	=	"An error occurred during file transfer. Please re-open the text file to display the complete content."

[fileaction]
add_to_download_station	=	"Add to Download Station"

[filebrowser]
add_file_upload_queue	=	"Added {0} files to Upload Queue."
add_filefoler_upload_queue	=	"Added {0} files or folders to Upload Queue."
add_upload_queue	=	"Added "{0}" to Upload Queue."
download_confirm_unload	=	"You are about to log out of {0} or refresh the page. Download tasks from _DISKSTATION_ to your local computer will be cancelled."
download_queue	=	"Download Queue"
file_request_notification	=	"Files uploaded from {0} to {1} via this file request link: {2}{3}{4}."
filebrowser_compress_completed	=	"Compress {0} successfully."
filebrowser_compress_failed	=	"Failed to compress {0}. {1}"
filebrowser_copy_completed	=	"Copy "{0}" successfully."
filebrowser_copy_completed_skip_all	=	"Skipped copying "{0}"."
filebrowser_copy_completed_skip_some	=	"Copied "{0}" successfully (with some items skipped)."
filebrowser_copy_failed	=	"Failed to copy "{0}".  {1}"
filebrowser_delete_completed	=	"Delete {0} successfully."
filebrowser_delete_failed	=	"Failed to delete {0}. {1}"
filebrowser_email_failed	=	"Failed to send email from {0} to {1}. Error: {2}."
filebrowser_email_success	=	"Successfully sent email from {0} to {1}."
filebrowser_extract_completed	=	"Extract {0} successfully."
filebrowser_extract_failed	=	"Failed to extract {0}. {1}"
filebrowser_move_completed	=	"Move "{0}" successfully."
filebrowser_move_completed_skip_all	=	"Skipped moving "{0}"."
filebrowser_move_completed_skip_some	=	"Moved "{0}" successfully (with some items skipped)."
filebrowser_move_failed	=	"Failed to move "{0}". {1}"
filebrowser_note_failed	=	"Failed to send email from {0} to {1}. Error: {2}. {3}"
filebrowser_note_failed_msg	=	"Please resend the email via the application."
filebrowser_property_completed	=	"Set the property of {0} successfully."
filebrowser_property_failed	=	"Failed to set the property of {0}. {1}"
filebrowser_upload_completed	=	"Upload "{0}" successfully."
filebrowser_upload_failed	=	"Failed to upload "{0}"."
filebrowser_upload_skipped	=	"Skipped uploading "{0}"."
filetable_compress	=	"Compress"
filetable_copy	=	"Copy"
filetable_cut	=	"Cut"
filetable_delete	=	"Delete"
filetable_extract	=	"Extract"
filetable_lock	=	"Lock"
filetable_move	=	"Move"
filetable_rename	=	"Rename"
filetable_upload	=	"Upload"
gdrive	=	"Google Drive"
gviewer	=	"Google docs Viewer"
gviewer_bigsize	=	"The document exceeds the maximum size allowed by Google docs Viewer. Are you sure you want to continue?"
local_confirm_unload	=	"You are about to log out of {0} or refresh the page. Local file operations will be cancelled."
open_filestation	=	"Open File Station"
open_sharing_manager	=	"Click here to open Shared Links Manager."
opendoceditor	=	"Edit in Google Drive"
opendocmenu	=	"View in Google Docs"
openfolder	=	"Open Folder"
openofficemenu	=	"View in Microsoft Office Online"
oviewer	=	"Office Viewer"
oviewer_bigsize	=	"The document exceeds the maximum size allowed by Office Viewer. Are you sure you want to continue?"
prompt_noshare	=	"There is no shared folder available. If you want to go to the <b>Shared Folder</b> page to create a shared folder, click <b>OK</b>."
prompt_noshare_standalone	=	"No available shared folders."
sharing_link	=	"Shared File Link"
sharing_message	=	"{0} has shared this file link: {1}{2}{3}"
snapshot	=	"Snapshot"
snapshot_desc	=	"Snapshot Description"
snapshot_go	=	"View"
snapshot_no_history	=	"No snapshots were found."
sort	=	"Sort by"
upload_confirm_unload	=	"You are about to log out of {0} or refresh the page. Upload tasks will be cancelled."
upload_file_completed	=	"Uploaded {0} files successfully."
upload_file_completed_with_skip	=	"Uploaded {0} files successfully (with {1} item(s) skipped)."
upload_filefoler_completed	=	"Upload {0} files or folders successfully."
upload_filefoler_completed_with_skip	=	"Uploaded {0} files/folders successfully (with {1} item(s) skipped)."
upload_queue	=	"Upload Queue"
view_snapshot_history	=	"View history"

[fileindex]
directory_not_exist	=	"Directory does not exist: {0}."
enable_content_index_desc	=	"You can further index file content by file type to quicken file search."
err_no_space	=	"You have run out of available space."
errro_folder_invalid	=	"The folder is not available."
fileindex_desc	=	"The system will index the added folder and also the contained files by filename."
fileindex_enable	=	"Enable file indexing"
fileindex_enable_desc	=	"Index contents within multiple shared folders for rapid file search by File Station."
fileindex_pause_note	=	"If you pause or delay folder indexing, you can only resume the indexing action by clicking the playback button under Indexing Progress on the desktop taskbar."
fileindex_spotlight_desc	=	"When indexed folders are mounted to the Mac computer, you can use Finder to find the contained files and contents. To enjoy this feature, go to {0} to enable Windows/Mac file service first."
fileindex_spotlight_win_desc	=	"After folders are indexed at {0}, you can use Mac Finder or Windows File Explorer to search the files and contents within."
fileindex_title	=	"File Indexing"
index_folder	=	"Indexed Folder"
indexed_folder_list	=	"Indexed Folder List"
indexing	=	"Indexing..."
indexing_progress	=	"Indexing Progress"
indexing_status	=	"{0} files and {1} sub-folders have been indexed."
indexingwithoutdot	=	"Indexing"
no_shared_folder	=	"None"
notify_no_space	=	"File indexing is now stopped due to insufficient space. Cilck {0}here{1} for details."
paused	=	"Paused"
resource_note	=	"Indexing requires more CPU resource. You may delay the indexing action until later."
type_audio	=	"Audio"
type_document	=	"Document"
type_photo	=	"Image"
type_video	=	"Video"
view_index_list	=	"View indexed folder list"

[filesearch]
prompt_speed_up	=	"To speed up file search, go to {0} to enable file indexing for your shared folders."

[filetable]
confirm_overwrite	=	"Are you sure you want to overwrite the file?"
download_paused	=	"The download queue is paused."
drop_file	=	"Drop Files Here"
filetable_atime	=	"Last Accessed"
filetable_create	=	"Create"
filetable_create_folder	=	"Create folder"
filetable_create_folder_title	=	"Create Folder"
filetable_ctime	=	"Created Date"
filetable_delete	=	"Delete"
filetable_delete_confirm	=	"Are you sure you want to delete the selected file(s)?"
filetable_download	=	"Download"
filetable_file	=	"File"
filetable_fill_name	=	"Please enter a folder name"
filetable_folder	=	"Folder"
filetable_group	=	"Group"
filetable_mtime	=	"Modified Date"
filetable_owner	=	"Owner"
filetable_privilege	=	"Privilege"
filetable_properties	=	"Properties"
filetable_read	=	"Read"
filetable_select_one	=	"Please select at least one entry."
filetable_title_file_type	=	"File Type"
filetable_write	=	"Write"
space_size	=	"Available: {0}, Total: {1}"
used_size	=	"Used size"

[firewall]
AP_other	=	"AP-other"
AQ_other	=	"AQ-other"
EU_other	=	"EU-other"
clone_firewall_profile	=	"Clone Firewall Profile"
config_firewall_profile_desc	=	"Customize your firewall profile."
description	=	"Description"
edit_firewall_profile	=	"Edit Profile"
edit_profile_rules	=	"Edit Rules"
fail_apply_firewall_profile	=	"Failed to apply the firewall profile."
fail_clone_profile	=	"Failed to clone the profile because a profile with the same name already exists."
fail_disable_firewall	=	"Failed to disable the firewall."
fail_load_profile	=	"Failed to load the profile data."
firewall_2lan_subnet_conflict	=	"Since 2 LAN are in the same subnet, the firewall rules of one LAN may apply to the other LAN."
firewall_action	=	"Allow / Deny"
firewall_active_profile_note	=	"active profile"
firewall_allow	=	"Action"
firewall_allow_packet_pass	=	"Access"
firewall_apply_confirm	=	"Do you want to replace your active profile {0} with {1}, or do you want to just save the changes?"
firewall_block_admin_client	=	"Your computer has been blocked by the new firewall configuration. The firewall configuration has been reset to the previous state. Please make sure that no rule is blocking your computer and try again."
firewall_choose_policy_remind	=	"Please specify if you would like to allow or deny access if no rules are matched."
firewall_country_code	=	"Geocode"
firewall_country_name	=	"Location"
firewall_discard_btn	=	"Discard"
firewall_dos_protect_enable	=	"Enable DoS protection"
firewall_dos_protect_enable_desc	=	"Denial-of-service (DoS) protection helps to prevent malicious attacks over the Internet."
firewall_dos_restore_failed	=	"Failed to restore DoS protection settings."
firewall_dos_save_failed	=	"Failed to save DoS protection settings."
firewall_drag_drop_hint	=	"You can drag and drop the rules to rearrange the order. Rules at the top have higher priorities."
firewall_enable	=	"Enable firewall"
firewall_enable_mask	=	"Please {0}enable firewall{1}."
firewall_enable_port_detect	=	"Enable firewall notifications"
firewall_enable_rule	=	"Enable"
firewall_error_ip_range	=	"The start IP address should be less than the end IP address."
firewall_example_subnet	=	"(e.g. 192.168.1.99 / 255.255.255.0)"
firewall_field_blank_alert	=	"This field is required."
firewall_field_exceed_multiports	=	"You can select up to {0} ports."
firewall_global_interface	=	"All interfaces"
firewall_global_no_match_desc	=	"If no rules in "All interfaces" are matched, rules in each interface will be matched."
firewall_ip_country_extra	=	"Any IP allocated to {0} but not belonging to any location in {1}"
firewall_ip_range	=	"IP range"
firewall_ip_type_diff	=	"Source IP and Private IP Address must both use the same Internet Protocol version (IPv4 or IPv6)."
firewall_just_save_btn	=	"Just Save"
firewall_manage_profile	=	"Manage profiles"
firewall_no_choose_service	=	"Please select a port from the list of services."
firewall_no_match_allow	=	"Allow access"
firewall_no_match_drop	=	"Deny access"
firewall_no_prompt	=	"Disable firewall notifications"
firewall_no_prompt_desc	=	"Firewall notifications can be enabled at {0} > Settings"
firewall_no_set_countries	=	"Please specify at least one location."
firewall_no_set_ip	=	"Please specify IP address information."
firewall_no_set_ports	=	"Please specify port information."
firewall_over_set_countries	=	"You can only select up to 15 locations for a rule."
firewall_policy_allow	=	"Allow"
firewall_policy_drop	=	"Deny"
firewall_policy_remind	=	"If no rules are matched"
firewall_port_block_info	=	"Firewall has blocked the below network ports. To make sure the service or application works properly, please allow access to these ports."
firewall_port_detect_desc	=	"Notify me when apps or services are blocked by the firewall and provide the option to unblock that service or app."
firewall_port_management	=	"Firewall Notification"
firewall_port_open_failed	=	"Failed to open these ports. Please see the settings at Control Panel > Security > Firewall."
firewall_port_type	=	"Type"
firewall_port_type_dest	=	"Destination port"
firewall_port_type_source	=	"Source port"
firewall_ports	=	"Ports"
firewall_ports_all	=	"All"
firewall_ports_range	=	"Port range"
firewall_ports_self_defined	=	"Custom"
firewall_ports_system	=	"Select from a list of built-in applications"
firewall_profile	=	"Firewall Profile"
firewall_profile_create	=	"Create Firewall Profile"
firewall_profile_create_fail	=	"Failed to create the profile. The same profile name already exists."
firewall_profile_delete	=	"Delete Firewall Profile"
firewall_profile_delete_check	=	"Are you sure you want to delete this profile?"
firewall_profile_delete_fail	=	"Failed to delete the profile. Please make sure the profile is not your active profile."
firewall_profile_name	=	"Profile name"
firewall_profile_name_format_error	=	"Invalid profile name. The profile name can only contain letters, numbers, space, dashes (-), and periods (.). It must start with a letter or number, and cannot end with a space."
firewall_profile_new_name	=	"New profile name"
firewall_profile_old_name	=	"Old profile name"
firewall_profile_rename	=	"Rename Firewall Profile"
firewall_profile_rename_fail	=	"Failed to rename the profile. The same profile name already exists."
firewall_protocol	=	"Protocol"
firewall_protocol_esp	=	"ESP"
firewall_protocol_esp_extend	=	"ESP (VPN - L2TP/IPSec)"
firewall_protocol_gre	=	"GRE"
firewall_protocol_gre_extend	=	"GRE (VPN - PPTP)"
firewall_protocol_icmp	=	"ICMP"
firewall_protocol_igmp	=	"IGMP"
firewall_protocol_tcp	=	"TCP"
firewall_protocol_udp	=	"UDP"
firewall_region	=	"Region"
firewall_rename_btn	=	"Rename"
firewall_restore_failed	=	"Failed to restore firewall rules."
firewall_restore_success	=	"If you disable this option, _DISKSTATION_ will deny all external access including access from this computer. You will only be able to access this _DISKSTATION_ via the local network. Do you want to disable this option?"
firewall_router_tc	=	"Router traffic control"
firewall_rule	=	"Firewall Rules"
firewall_rule_add	=	"Create Firewall Rules"
firewall_rule_disable_check	=	"Are you sure you want to change the firewall settings to disable the related rules?"
firewall_rule_disable_fail	=	"Failed to disable the firewall rule. Please go to Control Panel > Security > Firewall to manage rules."
firewall_rule_edit	=	"Edit Firewall Rules"
firewall_rule_enable_check	=	"Are you sure you want to change firewall settings to enable the related rules?"
firewall_rule_enable_fail	=	"Failed to enable the firewall rule. Please go to Control Panel > Security > Firewall to manage rules."
firewall_rule_exceed_max_number	=	"The maximum number of firewall rules has already been reached."
firewall_rules_drag_drop_text	=	"{0} rule(s) selected"
firewall_save_adapter_change_confirm	=	"The firewall rules for the network interface have been modified. Do you want to save the changes?"
firewall_save_failed	=	"Failed to save firewall rules."
firewall_save_profile_change_confirm	=	"The profile {0} has been modified. Do you want to save the changes?"
firewall_save_replace_btn	=	"Save & Replace"
firewall_save_success	=	"Firewall settings have been saved successfully."
firewall_security	=	"Security"
firewall_select_all	=	"Select all"
firewall_service_desc_afp	=	"Share files with Mac"
firewall_service_desc_bonjour	=	"Bonjour Service"
firewall_service_desc_bt	=	"TCP Port"
firewall_service_desc_bt_dht	=	"DHT UDP port"
firewall_service_desc_dma	=	"DLNA/UPnP media server"
firewall_service_desc_dms_tcp	=	"TCP Port"
firewall_service_desc_dms_udp	=	"UDP Port"
firewall_service_desc_dr	=	"Disaster Recovery"
firewall_service_desc_dsm_http	=	"Management UI, File Station, Audio Station, Surveillance Station, Download Station, CMS"
firewall_service_desc_dsm_https	=	"Management UI, File Station, Audio Station, Surveillance Station, Download Station, CMS"
firewall_service_desc_emule_tcp	=	"TCP Port"
firewall_service_desc_emule_udp	=	"UDP Port"
firewall_service_desc_file_extra	=	"Extra HTTP port"
firewall_service_desc_file_https_extra	=	"Additional HTTPS port"
firewall_service_desc_findhostd	=	"Synology Assistant, Network Backup"
firewall_service_desc_ftp	=	"FTP file server"
firewall_service_desc_http	=	"Web Station and Web Mail"
firewall_service_desc_ipp	=	"Network Printer, Apple Wireless Printing"
firewall_service_desc_itunes	=	"iTunes Server"
firewall_service_desc_lpr	=	"Network Printer"
firewall_service_desc_mail_imap	=	"Mail (IMAP)"
firewall_service_desc_mail_pop3	=	"Mail (POP3)"
firewall_service_desc_mail_smtp	=	"Mail (SMTP)"
firewall_service_desc_mfp	=	"Network MFP"
firewall_service_desc_mysql	=	"MySQL database"
firewall_service_desc_netbkp	=	"rsync"
firewall_service_desc_nfs	=	"Mac/Linux file server"
firewall_service_desc_samba	=	"Windows file server, join Domain"
firewall_service_desc_smb	=	"Windows file server"
firewall_service_desc_snmp	=	"SNMP service"
firewall_service_desc_ssh	=	"Encrypted terminal service (includes encrypted rsync and SFTP)"
firewall_service_desc_surveillance_extra	=	"HTTP (Additional port)"
firewall_service_desc_surveillance_https_extra	=	"HTTPS (Additional port)"
firewall_service_desc_telnet	=	"Unencrypted terminal service"
firewall_service_desc_tftp	=	"TFTP file server"
firewall_service_desc_upnp_msearch	=	"UPnP Service"
firewall_service_desc_upnp_router	=	"UPnP Router"
firewall_service_desc_ups	=	"UPS Server"
firewall_service_desc_version_bkp	=	"Hyper Backup Vault"
firewall_service_desc_vs60	=	"Search VisualStation"
firewall_service_opt_bonjour	=	"Bonjour"
firewall_service_opt_bt	=	"BT"
firewall_service_opt_dsm_http	=	"_OSNAME_ (HTTP)"
firewall_service_opt_dsm_https	=	"_OSNAME_ (HTTPS)"
firewall_service_opt_emule	=	"eMule"
firewall_service_opt_file_extra	=	"File Station (Extra)"
firewall_service_opt_findhostd	=	"Search _DISKSTATION_"
firewall_service_opt_http	=	"HTTP"
firewall_service_opt_http_extra	=	"HTTP (Additional port)"
firewall_service_opt_https	=	"HTTPS"
firewall_service_opt_https_extra	=	"HTTPS (Additional port)"
firewall_service_opt_ipp	=	"IPP"
firewall_service_opt_lpr	=	"LPR"
firewall_service_opt_mail_imap	=	"Mail (IMAP)"
firewall_service_opt_mail_pop3	=	"Mail (POP3)"
firewall_service_opt_mail_smtp	=	"Mail (SMTP)"
firewall_service_opt_mfp	=	"Network MFP"
firewall_service_opt_mysql	=	"MySQL"
firewall_service_opt_netbkp	=	"rsync"
firewall_service_opt_nfs	=	"NFS"
firewall_service_opt_samba	=	"SAMBA"
firewall_service_opt_smb	=	"CIFS"
firewall_service_opt_ssh	=	"SSH"
firewall_service_opt_surveillance_extra	=	"Surveillance Station"
firewall_service_opt_surveillance_ipcam	=	"UPnP (Camera Search)"
firewall_service_opt_surveillance_mpeg4	=	"Surveillance Station (MPEG4 streaming port)"
firewall_service_opt_telnet	=	"Telnet"
firewall_service_opt_tftp	=	"TFTP"
firewall_service_opt_upnp_msearch	=	"UPnP SSDP"
firewall_service_opt_upnp_router	=	"UPnP Service"
firewall_service_opt_version_bkp	=	"Hyper Backup"
firewall_service_opt_vs60	=	"VisualStation"
firewall_service_title	=	"iTunes"
firewall_source	=	"Source IP"
firewall_source_network	=	"Subnet"
firewall_specific_ip	=	"Specific IP"
firewall_split_by_common	=	"(Separate with commas)"
firewall_system_port_column_desc	=	"Applications"
firewall_system_port_title	=	"Select Built-in Applications"
firewall_tc	=	"Traffic Control"
firewall_tc_bandwidth_settings	=	"Bandwidth Settings"
firewall_tc_ceil_exceed_system_upper_bound	=	"The sum of the maximum bandwidth is too large. Please enter lower values."
firewall_tc_ceil_limit	=	"The maximum bandwidth cannot exceed {0} KB/s."
firewall_tc_header_rate_max	=	"Maximum (KB/s)"
firewall_tc_header_rate_min	=	"Guaranteed (KB/s)"
firewall_tc_max_ceil_too_large	=	"The largest maximum bandwidth you entered is too large. Please enter a lower one."
firewall_tc_rate_desc	=	"0 KB/s means unlimited"
firewall_tc_rate_limit	=	"The guaranteed bandwidth cannot exceed {0} KB/s."
firewall_tc_rate_max	=	"Maximum Bandwidth (KB/s)"
firewall_tc_rate_min	=	"Guaranteed Bandwidth (KB/s)"
firewall_tc_restore_failed	=	"Failed to restore Traffic Control rules."
firewall_tc_restore_success	=	"Traffic Control rules have been restored successfully."
firewall_tc_rule_add	=	"Create Traffic Control Rule"
firewall_tc_rule_edit	=	"Edit Traffic Control Rule"
firewall_tc_save_failed	=	"Failed to save Traffic Control rules."
firewall_tc_save_success	=	"Traffic Control rules have been saved successfully. "
firewall_tc_unlimited	=	"Unlimited"
firewall_tc_warning	=	"Guaranteed Bandwidth must be smaller than or equal to Maximum Bandwidth."
firewall_vpn_ipsec_passthrough	=	"IPSec Pass-through"
firewall_vpn_l2tp_passthrough	=	"L2TP Pass-through"
firewall_vpn_openvpn_passthrough	=	"OpenVPN Pass-through"
firewall_vpn_passthrough	=	"VPN Pass-through"
firewall_vpn_passthrough_desc	=	"When the _DISKSTATION_ acts as a router, VPN pass-through allows VPN traffic of clients to pass through the NAT of the _DISKSTATION_."
firewall_vpn_pptp_passthrough	=	"PPTP Pass-through"
firewall_vpnpassthrough_restore_failed	=	"Failed to restore VPN pass-through settings."
firewall_vpnpassthrough_save_failed	=	"Failed to save VPN pass-through settings."
firewall_vpnpassthrough_specific_platform	=	"VPN pass-through is only available on certain models."
manage_firewall_profile	=	"Manage firewall profile"
profile_to_clone	=	"Source profile"
router_firewall_restore_success	=	"The new firewall rules will block your current access to the _DISKSTATION_. Do you still want to apply the new rules? To enforce the new rules, click Yes. Your Internet access will be immediately blocked. To abandon the new rules, click No."
router_firewall_service_desc_http	=	"Photo Station"
service_fw_conflict_global	=	"The firewall rules for {0} and "All interfaces" conflict, so the settings cannot be saved. Please go to Control Panel > Security > Firewall to disable or remove the firewall rules for "All interfaces" and try again."

[forgot_pass]
admin_hint	=	"If you are in the local administrator group of this _DISKSTATION_, please refer to {0}this FAQ{1} to learn how to reset your password."
change_pass_desc	=	"Set a new password for your account."
change_pass_title	=	"Change password"
change_success_desc	=	"Your password has been changed."
change_success_title	=	"Success!"
check_mail_desc	=	"Email has been sent. Please check your inbox."
check_mail_title	=	"Check your email"
endpoint_not_accessible	=	"Failed to connect to LDAP server."
forgot_form_desc	=	"Enter your username to send a password reset email."
forgot_form_title	=	"Forgot your password?"
login_now	=	"Sign In Now"
mail_not_receive_hint	=	"If you are unable to locate the email in your inbox, please refer to {0}this article{1} for more information."
mail_sent_desc	=	"Email has been sent. Please check your inbox. If you are unable to locate the email in your inbox, please refer to {0}this article{1} for more information."
redirecting	=	"Redirecting. Please wait."
send_mail	=	"Send"
server_no_mail_service	=	"Email notification has not been enabled on the LDAP server."

[ftp]
conn_restriction	=	"Connection Restriction"
conn_settings	=	"Connection Settings"
export_log	=	"Export Log"
fips_enable	=	"Enable FIPS cryptographic module"
ftp_advanced_option_desc	=	"Configure file transfer logs, anonymous FTP, and modify FTP root directory or other settings."
ftp_annoymous_root_share_invalid	=	"The anonymous FTP/WebDAV user no longer has access permissions for the shared folder."
ftp_annoymous_root_share_msg	=	"This shared folder is FTP anonymous root. Anonymous will fail to sign in after the folder is deleted. You can select another shared folder as FTP anonymous root to solve this problem."
ftp_anonymous	=	"Enable Anonymous FTP"
ftp_anonymous_chroot	=	"Change Anonymous root"
ftp_anonymous_desc	=	"Users can access shared folders via FTP using the "anonymous" username. Make sure the "Anonymous FTP/WebDAV" user has been assigned correct access privileges for the shared folder."
ftp_auto_deny	=	"Enable IP Auto-block"
ftp_auto_deny_desc	=	"Enable this function to block the IP hosts which have failed to sign in repeatedly."
ftp_cfrm_remove_users	=	"Are you sure you want to remove the selected user(s)?"
ftp_cfrm_reset_anonymous_chroot	=	"This shared folder was set as the FTP anonymous root folder, but cannot be accessed by anonymous FTP clients anymore. Do you want to set a new FTP anonymous root folder now?"
ftp_chroot_desc	=	"Change user root directories"
ftp_chroot_duplicate_user_group	=	"Duplication of users or groups not allowed"
ftp_chroot_other_directory	=	"Other directory"
ftp_chroot_to	=	"Change root directory to"
ftp_chroot_user_list	=	"Select user"
ftp_desc	=	"Users can access data on the system through FTP (file transfer protocol) after enabling the service."
ftp_domain_ldap_user_home_disabled	=	"Domain/LDAP user home service is disabled."
ftp_edit_list	=	"View/Edit Block List"
ftp_enable	=	"Enable FTP service"
ftp_enable_max_conn_per_ip	=	"Limit connections per IP"
ftp_enabled	=	"Enable FTP service (No encryption)"
ftp_flow_ctrl	=	"Enable FTP bandwidth restriction"
ftp_flow_desc	=	"(0 KB/s means unlimited.)"
ftp_ftpes	=	"FTP / FTPS"
ftp_local_time	=	"Local time on server"
ftp_manual_port_range	=	"Use the following port range"
ftp_max_conn	=	"Max connections"
ftp_max_download	=	"Max download rate per connection"
ftp_max_upload	=	"Max upload rate per connection"
ftp_modify_time_std	=	"Display setting for file modification time"
ftp_no_chroot_user	=	"No user is selected."
ftp_no_share	=	"There is no share folder available."
ftp_onlyssl	=	"Allow SSL/TLS connection only"
ftp_pasv_ext_ip	=	"Report external IP in PASV mode"
ftp_pasv_ext_ip_assign	=	"Assign external IP"
ftp_pasv_port_min	=	"The initial value of Passive FTP port range must be greater than 1024."
ftp_pasv_port_range	=	"Port range of Passive FTP:"
ftp_port	=	"Port number setting of FTP service"
ftp_port_from	=	"From"
ftp_port_in_used	=	"This port number is reserved for system use only. Please enter a different number."
ftp_port_to	=	"To"
ftp_ports_conflict	=	"The FTP port number conflicts with the Passive FTP port range. Please use other numbers."
ftp_root_dir	=	"Shared folder"
ftp_service_starting	=	"Enabling FTP service..."
ftp_share_missing	=	"Anonymous root share folder does not exist, please choose another share."
ftp_support_ascii_mode	=	"Support ASCII transfer mode"
ftp_timeout	=	"Timeout"
ftp_use_utf8	=	"Force UTF-8 encoding"
ftp_user_chroot	=	"Change the selected users' root to user home"
ftp_user_home_disabled	=	"User home service is disabled."
ftp_user_home_not_enable	=	"User home service is not enabled yet. Please enable it before changing users' root."
ftp_user_select	=	"Select User"
ftp_utc_time	=	"UTC time"
ftp_utf8_auto	=	"Auto"
ftp_utf8_client	=	"Enable UTF-8 filename support"
ftp_utf8_desc	=	"UTF-8 encoding"
ftp_utf8_disabled	=	"Disable"
ftp_utf8_forced	=	"Force"
ftp_warn	=	"After new configurations are applied, all clients will be disconnected. Do you want to continue?"
ftp_wrong_port	=	"Please use numerals in the port number. The port number can not be 0."
ftp_wrong_port2	=	"The port number cannot be greater than 65535."
ftp_wrong_rate	=	"Please use only numerals in the bandwidth."
ftp_xferlog	=	"Enable FTP file transfer log"
ftpes_enabled	=	"Enable FTP SSL/TLS encryption service (FTPS)"
fxp_enable	=	"Enable FXP"
privilege_setting	=	"Privileges setup"
pxe_bootloader	=	"Boot loader"
pxe_dhcp_not_install	=	"DHCP Server is out-of-date or not installed. Please install the latest version of DHCP Server to enable PXE service."
pxe_dns	=	"DNS Server"
pxe_enable	=	"Set up DHCP service on this server for PXE"
pxe_end_ip	=	"End IP address"
pxe_gateway	=	"Gateway"
pxe_hotspot_subnet_overlap	=	"Local network subnet settings are different from hotspot subnet settings. Please make sure both settings are the same."
pxe_interface	=	"Network Interface"
pxe_invalid_input_value	=	"Invalid input value"
pxe_netmask	=	"Netmask"
pxe_setting	=	"PXE subnet setting"
pxe_start_ip	=	"Start IP address"
pxe_subnet	=	"Subnet range"
security_setting	=	"Security Settings"
select_folder	=	"Select a folder"
sftp_enabled	=	"Enable SFTP service"
sftp_other_port	=	"Use another port:"
sftp_port	=	"Port number"
sftp_setting	=	"SFTP"
sftp_ssh_port	=	"Use port 22, the same as SSH"
sftp_ssh_same_port	=	"Use SSH port"
tftp_all_connection	=	"All connections"
tftp_allow_ip_range	=	"Only allow the following IP address range"
tftp_allowed_client	=	"Allowed clients"
tftp_desc	=	"Enabling TFTP (Trivial File Transfer Protocol) allows users to access data on the system and automatically transfer configurations or boot files."
tftp_enable	=	"Enable TFTP service"
tftp_invalid_root_folder	=	"Invalid file path to root folder."
tftp_no_privilege_restart_service	=	"No permissions to restart the TFTP service."
tftp_permission	=	"TFTP Client Permission"
tftp_root	=	"TFTP root folder"
tftp_title	=	"TFTP"
tftp_xferlog	=	"Enable TFTP file transfer log"
timeout_range	=	"(1~7200)"
xfer_setting	=	"Transfer Setting"

[ftpwizard]
anony_descr	=	"Enable Anonymous FTP will allow users to access your FTP site with the anonymous username. Please continue and assign shared folder access rights for the FTP anonymous user account."
anony_disable	=	"Disallow anonymous user login."
anony_enable	=	"Allow anonymous user login."
final_descr	=	"FTP service is enabled. To allow users to access your FTP site from the Internet, run the Internet Access Wizard."
finalstep_title	=	"Finished"
ftpopt_title	=	"FTP settings"
long_descr	=	"Set up FTP service"
maxdownrate_limit	=	"FTP maximum download rate is limited to {0} KB/s."
maxdownrate_nolimit	=	"FTP maximum download rate has no limit."
maxuprate_limit	=	"FTP maximum upload rate is limited to {0} KB/s."
maxuprate_nolimit	=	"FTP maximum upload rate has no limit."
share_title	=	"Select shared folders for "anonymous""
short_descr	=	"FTP Server"
summary_anony	=	"FTP Anonymous user is assigned the following privileges:"
summary_ftp	=	"FTP service on {0} will be enabled."
summary_title	=	"Confirm settings"
welcome	=	"The wizard will help you do the following:<p><ul><li>Enable FTP service.</li> <li>Set configurations.</li></ul></p>"
welcome_title	=	"Welcome to the FTP Setup Wizard"
wizard_title	=	"FTP Setup Wizard"

[group]
add_groups	=	"Add groups"
add_member	=	"Add"
cfrm_add_users	=	"Are you sure you want to add the following users to {0}?"
cfrm_remove_users	=	"Are you sure you want to remove the following user(s) from {0}?"
current_account	=	"current account"
deleting_group	=	"Deleting..."
error_add_member	=	"Failed to add new group member(s). Please try again later."
error_badname	=	"The group name is invalid or contains invalid characters."
error_chgusers	=	"You cannot change the system user group."
error_cntapymtl_gr	=	"You can not apply multiple groups at the same time."
error_cntapyno_gr	=	"Please select one user group first."
error_get_info	=	"Failed to get group info. Please try again later."
error_get_share_privileges	=	"Failed to get shared folder permissions. Please try again later."
error_nameused	=	"The group name already exists or is reserved for system use only. Please enter a different one."
error_new_group	=	"Failed to create a new group. Please try again later."
error_noname	=	"No group name was entered."
error_remove_members	=	"Failed to remove group members. Please try again later."
error_rmmember	=	"Failed to remove the member(s) from the administrators group. There should be at least one valid administrator in the system."
error_rmmember_cur	=	"You can not remove the current login user from administrators group."
error_rmvdef	=	"You cannot delete the default group."
error_rmvempty	=	"Please select a group."
error_rmvnone_gr	=	"You did not select any user groups to remove."
error_set_info	=	"Failed to set group info. Please try again later."
error_set_share_privileges	=	"Failed to set shared folder permissions. Please try again later."
error_too_many_dir_admin	=	"Reached the maximum limit of domain administrators groups."
error_toomanygr	=	"The number of user group cannot exceed {0}."
failed_load_group	=	"Failed to load group data. Please try again later."
group_basicinfo	=	"Enter group information"
group_cfrmrmv	=	"Are you sure you want to delete the following groups?"
group_cfrmrmv_num	=	"Are you sure you want to delete these {0} groups?"
group_createtitle	=	"Create"
group_desc	=	"Group description"
group_export	=	"Export"
group_group	=	"User group"
group_instruct1	=	"Please select groups:"
group_list	=	"Group List"
group_member_title	=	"Select members"
group_members	=	"Members"
group_membertitle	=	"Edit Members"
group_name	=	"Group Name"
group_nombrs	=	"No members in this group."
group_notmbrs	=	"Not members"
group_quota_dedupe	=	"Once data deduplication is enabled for this volume, group quota will be disabled."
group_quota_header	=	"Quota per Member"
group_shareinfo_descr	=	"Set access permission for shared folders"
group_shareinfo_title	=	"Assign shared folder permissions"
group_subject	=	"Group Setup"
group_summary_title	=	"Confirm settings"
group_tip1	=	"A group is a collection of users who can have common permissions assigns."
group_wizard_title	=	"Group Creation Wizard"
groupinfo_descr	=	"Fill in the following fields"
grp_desc	=	"Description"
grp_managedby	=	"Managed By"
grp_name	=	"Name"
grp_scope	=	"Scope"
grp_type	=	"Type"
newgrpdlg_title	=	"Create group"
quotainfo_title	=	"Assign group quota"
remove_member	=	"Remove"
search_group	=	"Search"
tabpanel_group_basicinfo	=	"Group Information"
users_group_mask_info	=	"The group "users" is a system default group. This group includes all users in this _OSNAME_ and its member list cannot be modified."

[hddsleep]
dcache_config	=	"Enable write cache"
dcache_confirmed	=	"Yes, scan hard disks and recover after reboot"
dcache_data_scrubbing	=	"Data in the disk write cache is probably lost due to disk's abnormal power lost. To ensure data consistency, system will perform data scrubbing to the corresponding storage pool immediately."
dcache_data_scrubbing_confirmed	=	"Yes, please run data scrubbing."
dcache_data_scrubbing_confirmed_with_fsck	=	"Yes, please run data scrubbing and remind me to scan the file system after data scrubbing is completed."
dcache_data_scrubbing_note	=	"<font class=note-font"><b>Note:</b></font> When data scrubbing is completed, we will automatically notify you to reboot your _DISKSTATION_ and then run a full scan of the file system. If you reboot or shut down your _DISKSTATION_ before data scrubbing is finished, the system will not be able to run a full scan of the file system. Disable the disk write cache if you encounter this error frequently."
dcache_data_scrubbing_with_fsck	=	"After data scrubbing is completed, system will remind you to restart your _DISKSTATION_ and run a full scan of the file system."
dcache_desc	=	"Enabling the write cache can optimize system performance but may result in data loss if power failure occurs."
dcache_fsck_wait4building	=	"The data in the disk write cache has probably been lost. Do you want to run a full scan of your file system after the system remaps the drives and restarts your _DISKSTATION_?"
dcache_miss_notification	=	"Notification of missing data in write cache"
dcache_note	=	"<font class="red-status">Failed to enable write cache. The write cache is disabled to maintain system stability and enhance drive compatibility. System performance will not be affected.</font>"
dcache_notification_note	=	"<font class="note-font"><b>Note：</b></font>The scanning process may take a while (approximately 25 minutes for a 1TB disk), during which you can use Synology Assistant to monitor or cancel the process. Please disable the disk write cache if this situation happens often."
dcache_notification_reboot	=	"The data in the disk write cache has probably been lost due to disk's abnormal power lost.  We recommend you to run a file system check to ensure system stability. If you consent, system will automatically check your file system after rebooting. Do you want to reboot now?"
dcache_suggest	=	"<font class="red-status">It is suggested to disable the write cache to ensure system stability and enhance drive compatibility. System performance will not be affected.</font>"
dcache_title	=	"Write cache support"
dcache_warning	=	"If a UPS is not accompanied with the server, turning off the cache setting is strongly suggested."
deep_sleep_subject	=	"Deep Sleep on Expansion Unit"
dwcache_suggest	=	"<font class="red-status">The write cache feature of this drive has been disabled to improve system stability and prevent system errors.</font>"
dwcache_suggest_disable	=	"<font class="red-status">The write cache feature of this drive has been disabled to improve system stability and prevent system errors.</font>"
dwcache_suggest_enable	=	"<font class="red-status">The write cache feature of this drive has been enabled to improve system stability and prevent system errors.</font>"
eunit_deep_sleep_desc	=	"Enable this option to minimize power consumption for the expansion unit. All LED indicators on the expansion unit will be turned off during deep sleep."
eunit_deep_sleep_subject	=	"Enable Deep Sleep to minimize power consumption for the expansion unit"
eunit_dsleep_disable_tip	=	"Expansion unit Deep Sleep is not supported by Disk(s) {0}."
eunit_dsleep_manual_disable_tip	=	"Please turn the Auto/Manual mode switch on the back panel of your expansion unit to Auto."
fanctrl_close	=	"Off"
fanctrl_desc	=	"After the hard disks are switched into hibernation, system will adjust the fan accordingly when the waiting time is up."
fanctrl_high	=	"High"
fanctrl_low	=	"Low"
fanctrl_on	=	"On"
fanctrl_speed	=	"Fan speed"
fanctrl_subject	=	"Fan control"
fanctrl_time	=	"Waiting time"
hdd_wakeup_log_desc	=	"Enable hibernation logs to record when internal, external SATA, and USB drives wake up from hibernation."
hdd_wakeup_log_subject	=	"Enable hibernation logs"
hddsleep_desc	=	"The internal drives and the external SATA drives will hibernate after being inactive for the configured time period."
hddsleep_hour	=	"hour"
hddsleep_hours	=	"hours"
hddsleep_idle	=	"Idle time"
hddsleep_min	=	"minutes"
hddsleep_none	=	"none"
hddsleep_not_support	=	"Unsupported Disk"
hddsleep_note	=	"Note: It might take a few seconds for _DISKSTATION_ to return from hibernation. At the mean time, you might experience slight delay when accessing the server. Please wait patiently."
hddsleep_subject	=	"HDD Hibernation"
sata_deep_sleep_subject	=	"Enable advanced drive hibernation to minimize power consumption for {0}"
sata_dsleep_disable_tip	=	"Advanced drive hibernation is not supported by Drive(s) {0}."
usb_hddsleep_desc	=	"USB drives will hibernate after being inactive for the configured time period (only for USB devices that support hibernation)."

[hdhealth]
datalost	=	"Note: All data on the hard disk will be deleted."
dev_fail_desc	=	"Drive has failed or is not detected."
formatdata	=	"Re-format the hard disk."
formatsystem	=	"System re-configuration."
hdhealth_title	=	"Hard Disk Failure"
mount_data_fail_desc	=	"The system configuration and data volume are corrupted. Your data may not be read or is read-only. Please back up your data as soon as possible."
mount_data_ro_desc	=	"The volume that contains user data is corrupted. To protect your data, _DISKSTATION_ is in read-only mode. Please back up your data now."
mount_system_fail_data_ro_desc	=	"Both the volume that contains system configurations and the volume that contains user data are corrupted. To protect your data, _DISKSTATION_ is in read-only mode. Please back up your data now."
mount_system_fail_desc	=	"The system configuration is lost."
partition_fail_desc	=	"The hard disk is not formatted for _DISKSTATION_."
reboot_desc	=	"_DISKSTATION_ is going to reboot.  Please search your _DISKSTATION_ in Assistant again after boot-up."
reinstall	=	"Format the hard disk and configure the system."
shutdown	=	"Shut down the _DISKSTATION_ and replace the hard disk."
shutdown_desc	=	"_DISKSTATION_ is going to shut down."
skip	=	"Skip. Ignore this warning message and continue the other services."

[healthcheck]
title_web_service	=	"Web Services"

[helpbrowser]
2fa_desc	=	"Enable 2-factor authentication for enhanced protection of your account. Multiple options are available, such as mobile phone or security key."
2fa_title	=	"Sign-in methods"
active_insight_desc	=	"Active Insight monitors your CPU usage, memory usage, and disk utilization of multiple devices around the clock, and sends instant notifications with repair tips when errors are detected."
active_insight_login_portal	=	"Login portal"
active_insight_title	=	"System monitoring"
apptitle	=	"_OSNAME_ Help"
auto_launch_desc	=	"_OSNAME_ Help offers comprehensive articles to help you find information you need quickly and easily. _OSNAME_ Help will automatically launch each time you log in."
backup_mobile	=	"Mobile"
backup_mobile_desc	=	"Organizing your photos is a snap with Synology Photos. Use it to automatically back up photos and videos from your mobile to your NAS anytime, anywhere."
backup_pc	=	"PC"
backup_pc_desc	=	"Synology Drive Server and its desktop client, Synology Drive Client, help keep data in sync between your computer and NAS."
backup_public_cloud	=	"Public cloud"
backup_public_cloud_desc	=	"Cloud Sync is integrated with a multitude of public cloud services, allowing you access to local copies of data stored on public clouds even when they are inaccessible."
click_to_replay	=	"Click to replay"
cloudsync	=	"Cloud Sync"
compatibility	=	"Compatibility"
ddns_desc	=	"DDNS allows you to connect to your NAS with high transmission speed through a custom domain name. Additional router settings may be required."
ddns_title	=	"High transmission speed"
desktop_tip_desc	=	"Everything to help you get started right away."
desktop_tip_title	=	"Take a quick tour"
direct_access	=	"Direct access on PC & Mac"
direct_access_afp	=	"Access files through AFP"
direct_access_smb	=	"Access files through SMB"
direct_access_smb_afp	=	"Directly access files on your NAS by entering the address below into the file manager on your computer."
drive	=	"Synology Drive"
dsm_package	=	"DSM & Packages"
dsm_package_desc	=	"You can find illustrative articles corresponding to specific features of DSM and packages here."
dsm_package_with_mobile	=	"DSM package (Mobile app available)"
dsm_package_without_mobile	=	"DSM package"
email_desc	=	"Enable email notifications so your NAS will shoot an email when specific events take place."
email_title	=	"Email"
enable_now	=	"Enable Now"
explore	=	"Go"
file_management	=	"File management"
file_management_create_share	=	"Create shared folders"
file_management_create_share_desc	=	"Create shared folders to start uploading files to your NAS. You can configure specific settings for these shared folders, such as user permission and folder encryption."
file_management_file_station	=	"Manage files with File Station"
file_management_file_station_desc	=	"File Station makes managing files a breeze! You can view all the files uploaded here, as well as open multiple File Station windows to drag and drop files."
firewall_desc	=	"Enable the firewall with a single click and automatically disable all ports except DSM-related services. Access to specific ports can be customized by setting up firewall rules."
firewall_title	=	"Firewall settings"
font_extra_large	=	"Extra Large"
font_large	=	"Large"
font_normal	=	"Normal"
font_size	=	"Font size"
go_tip_later	=	"You can go to <b>DSM Help</b> later to learn more usage tips and information about DSM."
goto	=	"Go to"
hbtoc	=	"Contents"
help_entry_desc	=	"Learn more about the useful features offered by DSM and other packages in these help articles."
help_entry_title	=	"Help articles for DSM and packages"
help_from_ds	=	"Offline"
help_from_syno	=	"Online"
help_no_internet	=	"Sorry, you don't have an Internet connection. _OSNAME_ Help will change to offline mode."
help_option	=	"More"
help_source	=	"Source"
home	=	"Home"
hyperbackup	=	"Hyper Backup"
mobile_desc	=	"Use DS finder to manage your NAS and to receive notifications on your mobile device anytime, anywhere."
mobile_title	=	"Mobile devices"
no_auto_launch	=	"Do not automatically launch _OSNAME_ Help at every login"
onlinesrc	=	"Tutorials & FAQ"
options	=	"Options"
photos	=	"Synology Photos"
protect_data_hyper_backup	=	"Complete NAS backup"
protect_data_hyper_backup_desc	=	"Back up data, configurations, and packages on your NAS to another NAS or public cloud such as Synology C2 through Hyper Backup."
protect_data_snapshot	=	"Rapid folder backup"
protect_data_snapshot_desc	=	"Snapshot Replication allows you to back up shared folders easily and restore rapidly when an accidental data loss occurs."
quickconnect_desc	=	"QuickConnect lets you connect to your NAS easily and quickly over the Internet without complex settings."
quickconnect_desc2	=	"Enter the address below into your browser to access your {0} via the Internet."
quickconnect_title	=	"Simple setup"
scan_desc	=	"Security Advisor conducts comprehensive scans for malware, network attacks, or outdated DSM versions, as well as provide instructions for solving issues on your NAS."
scan_title	=	"Security scans"
search_results	=	"Search Results"
select_topic	=	"Click on a topic to learn what DSM has to offer."
sr	=	"Snapshot Replication"
system_app	=	"System"
tip_backup_desc	=	"Back up data to your NAS from sources such as PC, mobile, and public cloud."
tip_backup_title	=	"Back up data"
tip_dataprotect_desc	=	"Step up your data protection game with these powerful tools!"
tip_dataprotect_title	=	"Protect your data"
tip_externalaccess_desc	=	"Access your NAS over the Internet quickly and securely, even when you're away from your NAS."
tip_externalaccess_title	=	"Access from anywhere"
tip_notification_desc	=	"Get notified right away when issues arise and take action!"
tip_notification_title	=	"Stay ahead of problems"
tip_security_desc	=	"Easily fend off malicious attacks with these security enhancement features."
tip_security_title	=	"Enhanced security"
tip_sharedfolder_desc	=	"Upload and manage files effortlessly regardless of your computer's operating system."
tip_sharedfolder_title	=	"Store and manage data"
tutorial_kb	=	"Visit Synology Knowledge Base"
tutorials_faq	=	"Tutorials & FAQ"
video_tutorial	=	"Video Tutorials"

[helptoc]
2factor_authentication	=	"2-Factor Authentication"
about	=	"Terms and Conditions - DSM"
accessibility	=	"Accessibility"
admin_usage	=	"Send usage feedback to Synology"
aggregate_portal	=	"Aggregation Portal"
ahamanager	=	"Synology High Availability"
ahamanager_description	=	"Implementation of Synology High Availability requires two Synology servers to create a high-availability cluster. One server acts as "active server" and the other acts as "passive server." Both the active and passive servers in the high-availability cluster are connected to the same expansion units, and share the same storage in them. To assure the data integrity, only the active server can handle the workload. In the event the active server malfunctions, the passive server will be ready to take over all services. Thus, the high-availability cluster will continue providing services normally, minimizing server downtime."
ahamanager_limitation	=	"Limitations and System Requirements"
ahamanager_monitor	=	"Monitor"
ahamanager_network	=	"Network"
ahamanager_overview	=	"Overview"
ahamanager_shutdown	=	"Shut Down and Replace Server"
ahamanager_split_brain	=	"Split-brain"
ahamanager_switchover	=	"Switchover"
appportalias	=	"Application Portal"
appprivilege	=	"Application Privileges"
approve_signin	=	"Approve Sign-In"
backup_service	=	"Backup Service"
codec_licenses	=	"Codec Licenses - DSM"
config_network	=	"Configure Network Connections"
connect_to_vpn	=	"VPN Connection"
contact_support	=	"Contact Support"
control_connected_devices	=	"Control Connected Devices"
create_guest_network	=	"Create wireless guest networks"
dc_output	=	"DC Output"
device	=	"External Devices"
directory_service	=	"Domain/LDAP"
directory_service_configure_domain_ldap	=	"Configure Domain/LDAP Settings"
directory_service_domain	=	"Domain"
directory_service_join_domain_ldap	=	"Join a Domain/LDAP"
directory_service_ldap	=	"LDAP"
directory_service_sso	=	"SSO Client"
directory_service_sso_Azure	=	"Microsoft Entra SSO Service"
directory_service_user_group	=	"Domain/LDAP Users or Groups"
disk_manager	=	"HDD/SSD"
dl_bt	=	"BT/HTTP/FTP/NZB"
dl_bt_setup	=	"Set up BT/HTTP/FTP/NZB"
dl_emule	=	"eMule"
dl_emule_server	=	"Set up Server/Kad"
dl_emule_setup	=	"Set up eMule"
dl_general	=	"Set up Download Station"
dl_settings	=	"Create a Download Task"
dl_tasklist	=	"Manage Download Tasks"
download_failure	=	"An error occurred (download failed). Retrying..."
downloadstation	=	"Download Station"
dsm_get_started	=	"DSM Desktop"
dsm_setting	=	"DSM Settings"
expansion_multipath	=	"Expansion"
expansion_topology	=	"Expansion Topology"
explore_desktop	=	"Navigate Desktop"
explore_nsm_desktop	=	"Explore SRM desktop"
externaldevice	=	"External Devices"
extract_failure	=	"An error occurred (extraction failed). Retrying..."
ezcloud	=	"QuickConnect"
file_request	=	"Create File Requests"
filebrowser	=	"File Station"
filebrowser_attributeprivilege	=	"View Attributes and Privileges"
filebrowser_compress	=	"Compress Files or Folders"
filebrowser_connect	=	"Remote Connection"
filebrowser_copy	=	"Copy or Move Files or Folders"
filebrowser_create	=	"Create a Folder"
filebrowser_createrenameremove	=	"Modify File Structure"
filebrowser_delete	=	"Delete Files or Folders"
filebrowser_download	=	"Download Files"
filebrowser_edit	=	"Edit Photos"
filebrowser_email	=	"Email Account"
filebrowser_extract	=	"Extract an Archive"
filebrowser_favorite	=	"Create My Favorites or Desktop Shortcuts"
filebrowser_fileinfo	=	"Display Additional Attributes"
filebrowser_mountiso	=	"Mount Virtual Drives"
filebrowser_mountremotevolume	=	"Mount Remote Folders"
filebrowser_musicinfo	=	"Edit Music Information"
filebrowser_open	=	"Open File in a New Window"
filebrowser_preview	=	"View Documents, Photos, or Videos"
filebrowser_privilege	=	"View or Change Files/Folder's Privilege"
filebrowser_readandmove	=	"Read and Move Files"
filebrowser_rename	=	"Rename a File or Folder"
filebrowser_require	=	"File Station Requirement"
filebrowser_search	=	"Search for Files or Folders"
filebrowser_upload	=	"Upload Files or Folders"
ftp	=	"FTP"
ftp_ftpes	=	"FTP / FTPS"
ftp_general	=	"General"
ftp_limit	=	"Connection Restriction"
ftp_security	=	"Security Settings"
get_url_error	=	"Please connect your _DISKSTATION_ to the Internet and try again."
group	=	"Group"
group_delete	=	"Remove a Group"
group_edit	=	"Edit a Group"
group_export	=	"Export Groups"
group_member	=	"Add/Remove Group Members"
group_new	=	"Create a Group"
hamanager	=	"Synology High Availability"
hamanager_controller	=	"Controller"
hamanager_description	=	"Synology High Availability uses two Synology servers to construct a high-availability cluster (HA cluster), with one server being the active server and the other one being the passive server for failover. The active server takes care of all the services and replicates data to the passive server. If the active server fails, the passive server will be promoted to be the new active server and starts taking over the services handled by the original active server."
hamanager_disk_status	=	"Disk Status"
hamanager_limitation	=	"Limitations and Requirements"
hamanager_log	=	"Log"
hamanager_monitor	=	"Monitor"
hamanager_network_setting	=	"Network Settings"
hamanager_overview	=	"Overview"
hamanager_performance	=	"Performance"
hamanager_service_monitor	=	"Service Monitor"
hamanager_shutdown	=	"Shutdown and Reset"
hamanager_split_brain	=	"Split-brain"
hamanager_storage_status	=	"Storage Status"
hamanager_switchover	=	"Switchover"
hamanager_wizard	=	"Wizard"
hardware_security_key	=	"Hardware Security Key"
indexdb_downloading	=	"The Search feature will be ready in a few seconds. Please wait..."
iscsilun_manager	=	"LUN"
iscsitrg_manager	=	"iSCSI target"
itunes	=	"iTunes"
itunes_general	=	"General"
lan	=	"LAN/Internet"
language	=	"Language"
leaf_backup	=	"Backup"
leaf_bkp	=	"Configuration Backup"
leaf_file_services	=	"File Services"
leaf_index_service	=	"Indexing Service"
leaf_info_center	=	"Info Center"
leaf_netbkpservice	=	"Network Backup"
leaf_public_access	=	"External Access"
leaf_restore	=	"Restore"
leaf_security	=	"Security"
leaf_synology_account	=	"Synology Account"
leaf_terminal_snmp	=	"Terminal & SNMP"
leaf_update_reset	=	"Update & Restore"
leaf_volgeneral_desc	=	"Get the basic guide of RAID, volumes, and Disk Group supported by _DISKSTATION_"
leaf_wanconfig	=	"DDNS"
leaf_wireless	=	"Wireless"
linkaggr	=	"Link Aggregation"
logcenter	=	"Log Center"
logcenter_archive	=	"Archive Settings"
logcenter_browse	=	"Logs"
logcenter_client	=	"Log Sending"
logcenter_description	=	"Log Center is a centralized log management application, including tools to display local logs, send and receive logs from other network devices, and search for archived logs. Log Center's comprehensive options and flexibility helps you gather and find information easily and efficiently."
logcenter_history	=	"Settings History"
logcenter_notification	=	"Notifications"
logcenter_overview	=	"Overview"
logcenter_search	=	"Log Search"
logcenter_server	=	"Log Receiving"
login_portal_advanced	=	"Advanced"
login_portal_applications	=	"Applications"
login_portal_dsm	=	"DSM"
login_style	=	"Login Style"
mail_account	=	"Email Account"
mailstation	=	"Mail Server"
mailstation_general	=	"General"
mailstation_receive	=	"Mail receiving settings"
mailstation_settings	=	"Mail server settings"
mailstation_webmail	=	"Webmail settings"
mainmenu	=	"Main Menu"
mainmenu_options	=	"Options"
manage_internet_connection	=	"Manage your Internet connection"
manage_ipv6	=	"Set up IPv6 tunnel to generate IPv6 addresses"
manage_led	=	"Customize LED settings"
manage_local_network	=	"Set up DHCP and network routing within LAN"
manage_port	=	"Configure DMZ host, port forwarding, and port triggering rules"
manage_profiles	=	"Manage Report Profiles"
manage_quickconn_ddns	=	"Access your router over the Internet using QuickConnect / DDNS"
manage_regional_settings	=	"Change SRM time and regional settings"
manage_service	=	"Manage SSH/SNMP/NTP services"
manage_settings	=	"Manage Additional Settings"
manage_usbmodem	=	"Set up wireless Internet connection with a mobile broadband dongle"
manage_wireless	=	"Manage your wireless network"
media_index_service	=	"Media Indexing"
media_index_service_index_folder	=	"Indexed Folder"
mediaservice	=	"Media Server"
mediaservice_browse	=	"Browsing Settings"
mediaservice_dma	=	"DMA Compatibility"
mediaservice_general	=	"Media Server"
mediaservice_index	=	"Indexed Folder"
modify_personal_account	=	"Modify personal account options"
network	=	"Network"
network_general	=	"General"
network_security	=	"Safeguard Network Security"
network_status	=	"Monitor Network Status"
networktools	=	"Troubleshoot Network Connections"
networktools_general	=	"Check IP routing via ping and traceroute"
networktools_wol	=	"Manage Wake on LAN services"
no_download_action	=	"An error occured (no download action)."
node_connection	=	"Connectivity"
node_fileserv	=	"File Sharing"
node_simple_mode	=	"Simple Mode"
notification	=	"Notification"
notification_content	=	"Events"
notification_email	=	"Email"
notification_filter	=	"Rules"
notification_pushservice	=	"Push Service"
notification_sms	=	"SMS"
notification_syslogng	=	"syslog-ng"
notification_webhook	=	"Webhooks"
ntp_service	=	"NTP Service"
oob_mgmt	=	"Out-of-Band Management"
open_source_license	=	"Open Source Licenses"
operation_mode	=	"Select your operation mode"
overview	=	"Overview"
parentalcontrol_keyword	=	"Filter websites by URLs and content categories"
parentalcontrol_schedule	=	"Create network access schedules for connected devices"
performance	=	"Performance"
personal_account	=	"Account"
personal_others	=	"Others"
personal_photo	=	"Photo Station"
personal_volume	=	"Quota"
personal_wallpaper	=	"Desktop"
photo_thumbnail	=	"Conversion Settings"
photostation	=	"Photo Station"
pkg_general	=	"General"
pkg_uninstall	=	"Install or Uninstall Packages"
pkg_upgrade	=	"Update Packages"
pkgmgr_configure	=	"Configure Package Center"
pkgmgr_install_buy	=	"Install or Buy Packages"
pkgmgr_manage	=	"Manage Packages"
power	=	"Power"
power_hibernation	=	"Drive Hibernation"
power_recovery	=	"General"
power_ups	=	"UPS"
pppoe	=	"PPPoE"
public_access_advanced	=	"Router Port"
quickconnect	=	"QuickConnect"
raid_manager	=	"Disk Group"
region	=	"Regional Options"
restoredefaults	=	"System Reset"
route	=	"Network Routing"
router_adminitration_desc	=	"Manage basic settings such as update and restore, connection security, display language, and LED behavior."
router_app_desc	=	"Manage system settings related to network connectivity, traffic/parental control, connection security, and much more."
router_configure_settings	=	"Configure SRM settings"
router_fileservices_desc	=	"Access and manage files on the attached storage devices via different popular file services such as Win/Mac file services, FTP, and WebDAV."
router_hibernation_desc	=	"Configure hibernation schedule for USB drives."
router_internet_desc	=	"Set up your Internet connection and configure QuickConnect, port forwarding, DMZ, and much more."
router_localnetwork_desc	=	"Establish local network and manage settings such as IPV6, static routing, and DHCP Server."
router_mediaindexing_desc	=	"Automatically scan multimedia files (such as photos, music, and videos) stored on the external storage devices, and compile them into a multimedia library to be used by multimedia applications or packages."
router_notification_desc	=	"Automatically send notifications via various media when specific system events or errors occur."
router_parentalcontrol_desc	=	"Control when each connected device can access the Internet, and prevent access to specific content types."
router_printer_desc	=	"Set up printers and share the printing service with other client devices or users."
router_priviledes_desc	=	"Create shared folders and users, and manage folder-specific and user-specific access privileges with additional security measures."
router_security_desc	=	"Manage security settings including firewall rules, auto block, security certificates, and other security options."
router_status_desc	=	"Monitor general wired/wireless connection, real-time usage (network, CPU, and memory), and the connected devices."
router_storage_desc	=	"Manage the attached storage devices and monitor storage usage."
router_trafficcontrol_desc	=	"Manage and monitor the network traffic of each connected device."
router_wireless_desc	=	"Set up Wi-Fi and configure related settings including guest network, WPS and MAC filter."
routerconf	=	"Router Configuration"
routerconf_rules	=	"Port Forwarding Rules"
routerconf_setup	=	"Set up Router"
rsync	=	"Rsync"
s2s_app_title	=	"Shared Folder Sync"
s2s_wiz_tab_svc	=	"Shared Folder Sync"
sdcopy	=	"SDCopy"
security_autoblock	=	"Manage allow/block lists and IP addresses"
security_certificate	=	"Create, import, export, and renew certificates"
security_firewall	=	"Customize firewall rules"
security_security	=	"Configure security settings to protect your network"
securityscan	=	"Security Advisor"
securityscan_idprotection_name	=	"Login Analysis"
securityscan_overview_name	=	"Overview"
securityscan_result_name	=	"Results"
settings	=	"Manage File Station Settings"
setup_notifications	=	"Set up notifications for status changes"
sftp_setting	=	"SFTP"
share	=	"Shared Folder"
share_acl_title	=	"Windows ACL"
share_clone	=	"Clone a Shared Folder"
share_create	=	"Create a Shared Folder"
share_edit	=	"Edit Shared Folder General Information"
share_enable_recycle_bin	=	"Enable Recycle Bin"
share_encrypt	=	"Encrypt a Shared Folder"
share_encrypt_edit	=	"Edit Encrypted Folder"
share_export_permissions	=	"Export Permissions Report"
share_general	=	"General"
share_hide_unreadable	=	"Hide Sub-Folders and Files from Users without Permissions"
share_index_title	=	"File Indexing"
share_key_manager	=	"Manage Encrypted Shared Folders"
share_mountiso	=	"Mount Virtual Drives"
share_mountremotevolume	=	"Mount Remote Folders"
share_privilege	=	"Assign Shared Folder Permissions"
share_privilege_asp	=	"Manage Advanced Shared Folder Permissions"
share_privilege_nfs	=	"Assign NFS Permissions"
share_remove	=	"Remove a Shared Folder"
sharing	=	"Share File Links"
signin_method	=	"Sign-In Method"
smart_playlist	=	"Smart Playlist"
smartblock	=	"Account Protection"
smb_main_settings_title	=	"SMB Settings"
snmp	=	"SNMP"
social_account	=	"Social Network"
space_manager	=	"Volume"
storage_manager_add_hdd_expand	=	"Add Drives to Expand the Storage Pool Capacity"
storage_manager_adjust_resync_speed	=	"Adjust the RAID Resync Speed Limits"
storage_manager_btrfs_dedupe	=	"Configure Data Deduplication"
storage_manager_change_raid_type	=	"Change the RAID Type of a Storage Pool"
storage_manager_choose_raid_type	=	"Choose a RAID Type"
storage_manager_convert_volume_to_pool	=	"Convert to a Multiple-Volume Storage Pool"
storage_manager_create_diskgroup	=	"Create a Disk Group"
storage_manager_create_storage_pool	=	"Create a Storage Pool"
storage_manager_create_volume	=	"Create a Volume"
storage_manager_data_scrubbing	=	"Data Scrubbing"
storage_manager_expand_volume	=	"Expand the Volume Size"
storage_manager_filesystem_defragmentation	=	"Perform File System Defragmentation"
storage_manager_repair_volume_diskgroup	=	"Repair a Storage Pool"
storage_manager_replace_disk	=	"Replace Disks in a Storage Pool"
storage_manager_replace_hdd_expand	=	"Replace a Drive"
storage_manager_space_reclaim	=	"Set a Space Reclamation Schedule"
storage_manager_ssd_cache_advisor	=	"Enable SSD Cache Advisor"
storage_manager_ssd_cache_change_raid_type	=	"Change RAID Type"
storage_manager_ssd_cache_create	=	"Create SSD Cache"
storage_manager_ssd_cache_expand_add_drive	=	"Add Drive"
storage_manager_ssd_cache_manage	=	"Manage SSD Cache"
storage_manager_ssd_cache_raid_type	=	"Choose a RAID Type for SSD Cache"
storage_manager_ssd_cache_repair	=	"Repair"
storage_manager_ssd_cache_replace_drive	=	"Replace Drive"
storage_manager_ssd_trim	=	"Enable SSD TRIM"
storage_manager_storage_pool_online_assemble	=	"Assemble a Storage Pool"
storage_manager_storage_pool_safe_eject	=	"Safely Eject a Storage Pool"
storage_manager_volume_diskgroup	=	"Volumes & Disk Groups"
storage_manager_volume_view_usage	=	"View the Volume Usage"
storage_privilege	=	"Configure user and shared folder privileges"
support_center	=	"Support Center"
support_services	=	"Support Services"
surveillance	=	"Surveillance Station"
synology_legal	=	"Synology Legal - DSM"
sysinfo_log	=	"Log"
sysinfo_storage	=	"Storage"
syslogclient	=	"Syslog"
syslogclient_filter	=	"Syslog Client filter"
syslogclient_setting	=	"Manage Settings"
system_database	=	"System Database"
system_network	=	"Network Services"
system_recovery	=	"System Recovery"
tbk_service_title	=	"Time Backup"
terminal	=	"Terminal"
tftp_setting	=	"TFTP"
time	=	"Time"
track_network_usage	=	"Track your Internet, CPU, and memory usage"
trafficcontrol_advanced	=	"Configure advanced rules to control speed and bandwidth usage"
trafficcontrol_general	=	"Manage network traffic"
trafficcontrol_monitor	=	"Monitor real-time network traffic"
try_download_indexdb	=	"Getting Search feature to work for you..."
tunnel	=	"Tunnel"
update_restore	=	"Update and restore SRM"
usbcopy	=	"USBCopy"
user_advanced	=	"Advanced"
user_copy	=	"Copy a User"
user_create	=	"Create"
user_delegate	=	"Delegate"
user_delete	=	"Remove a User"
user_edit	=	"Edit a User"
user_export	=	"Export"
user_home	=	"User Home"
user_import	=	"Import"
user_manage	=	"Manage"
view_reports	=	"View Usage and Reports"
volume_general	=	"General"
webserv_app	=	"Web Applications"
webserv_dav	=	"WebDAV"
webserv_opt	=	"HTTP Service"
webserv_php	=	"PHP Settings"
winmac	=	"SMB/AFP"
winmacnfs	=	"SMB/AFP/NFS"
winmacnfs_mac	=	"AFP"
winmacnfs_nfs	=	"NFS Service"
winmacnfs_win	=	"SMB"
wireless	=	"Join Wireless Network"
worm_share_edit	=	"Edit WriteOnce Settings"

[hibernation]
hibernation_ignore_netbios_broadcast	=	"Ignore broadcasting packets from Windows Explorer"
hibernation_system_deepsleep_statement	=	"Start system hibernation 60 seconds after HDD enters hibernation"
hibernation_title	=	"Hibernation"

[home]
edit_soft_check_fail	=	"The following require home service to function. Disabling home service will also disable these services. Are you sure you want to continue?"
feasibility_share_transform	=	"Home service will be paused when changing the "homes" shared folder between encrypted and standard types, converting it to a Hybrid Share folder, or including it in or removing it from a tiering plan.""
feasibility_share_umount	=	"Home service will be stopped when the [homes] shared folder is unmounted."
home_info_title	=	"Basic Information"
home_sitemap_title	=	"Site Map"
home_subject	=	"Summary"
personal_home_subject	=	"User Information"
recycle_bin_status	=	"Recycle bin status"

[hotkey_manager]
app_title	=	"Keyboard Shortcut Guide"
arrow	=	"Arrow keys"
arrow_shift	=	"Arrow + Shift"
btn	=	"Button"
btn_enter_space	=	"Trigger a button click event"
checkbox	=	"Checkbox"
checkbox_space	=	"Check or uncheck a checkbox"
cmp_hotkey	=	"Component Keyboard Shortcuts"
combo	=	"Combo Box"
combo_down	=	"Open the list of a combo box"
combo_enter	=	"Confirm selection in the list of a combo box"
combo_esc	=	"Close the list of a combo box and cancel selection"
combo_up_down	=	"Select a different item in the list of a combo box"
date	=	"Date Field"
date_arrow	=	"Select a different date"
date_enter	=	"Confirm date selection"
date_left_right_shift	=	"Select a different month"
date_space	=	"Select today"
date_up_down_shift	=	"Select a different year"
desktop_hotkey	=	"Desktop Keyboard Shortcuts"
down	=	"Down Arrow"
enable_desktop_hotkeys	=	"Enable desktop keyboard shortcuts"
enter	=	"Enter"
enter_space	=	"Enter or Space"
esc	=	"Esc"
fn	=	"Function"
focus_desktop	=	"Set focus to desktop shortcuts"
grid	=	"Table"
grid_left_right	=	"Select a different cell or column header"
grid_space	=	"Interact with operable or editable cells"
grid_up_down	=	"Select a different row"
key	=	"Keys"
launch_help	=	"Open related help documents"
left	=	"Left Arrow"
left_right	=	"Left or Right Arrow"
left_right_shift	=	"Left or Right Arrow + Shift"
list	=	"List"
list_arrow	=	"Select a different list item"
luanch_manager	=	"Open keyboard shortcut help"
menu	=	"Menu"
menu_left	=	"Close the current menu, and go back to its parent menu or the point where it was opened"
menu_right	=	"Open sub-menu"
menu_up_down	=	"Select a different menu item"
open_main_menu	=	"Open main menu"
open_searchbox	=	"Open search bar"
radio	=	"Radio Button"
radio_arrow	=	"Select a different radio button"
right	=	"Right Arrow"
search	=	"Search Field"
search_enter	=	"Move to search results, or confirm the selection of a result"
search_up_down	=	"Select a different search result"
space	=	"Space"
switch_active_window	=	"Switch between active windows"
tab	=	"Tab key"
tabpanel	=	"Tab Panel"
tabpanel_left_right	=	"Select a different tab"
tabpanel_tab	=	"Move to the content of a selected tab"
toggle_all_window	=	"Show/hide all active windows"
tree	=	"Tree"
tree_left	=	"Collapse nodes or return to the parent node"
tree_right	=	"Expand nodes or move to the child node"
tree_up_down	=	"Move to the previous or next node"
up_down	=	"Up or Down Arrow"
up_down_shift	=	"Up or Down Arrow + Shift"

[hotspare]
auto_replacement_desc	=	"Auto Replacement allows a hot spare drive to automatically replace a drive in "Critical" status, preventing the protected storage pool from becoming degraded."
auto_replacement_note	=	"After a hot spare drive has replaced a defective drive in a storage pool, the hot spare drive will be added to the storage pool and will no longer serve as a hot spare drive for storage pool protection."
capacity	=	"Capacity"
create_step1_title	=	"Select the storage pools that you want to protect before proceeding"
create_step2_title	=	"Select and assign the available drives as hot spare drives for the storage pools that you want to protect"
create_title	=	"Assign hot spare drives"
create_wizard_title	=	"Hot Spare Creation Wizard"
created	=	"Hot spare created"
delete_confirm	=	"Are you sure you want to delete this hot spare drive?"
delete_confirm_last_hotspare	=	"Once you delete this hot spare drive, <span class="v-sm-bold">{0}</span> will no longer be protected by any hot spare drive. Are you sure you want to delete this hot spare drive?"
delete_confirm_last_hotspare_mulitpools	=	"Once you delete this hot spare drive, the following storage pools will no longer be protected by any hot spare drive. Are you sure you want to delete this hot spare drive?<br><span class="v-sm-bold">{0}</span>"
drive_activity	=	"Drive action"
drive_activity_erase_or_perf_test	=	"No ongoing operations (e.g., Secure Erase or firmware updates)"
drive_location_multiple	=	"%NAS Model% is not supoorts cross volume, the selected storage pools must be from the same device."
drive_size	=	"Drive capacity"
drive_status	=	"Drive status"
drive_status_healthy	=	"Healthy"
drive_type	=	"Drive type"
drive_type_multiple	=	"The drive type of hot spare drives must be the same as that of the drives in the storage pool."
edit_hotspare_title	=	"Edit Hot Spare"
hotspare_available_size	=	"Available Capacity"
hotspare_create_num	=	"{0} hot spare drives selected"
hotspare_create_num_single	=	"{0} hot spare drive selected"
hotspare_title	=	"Hot Spare"
location	=	"Drive location"
match_condition	=	"The hot spare drive must match the following conditions:"
match_condition_tip	=	"Only drives matching the <a class="link-font sm-show-pointer-cursor" href="#">Hot Spare Conditions</a> can be assigned as hot spare drives."
model	=	"Model"
no_eligible_drives	=	"No matching drives"
not_support_crashed	=	"storage pool crashed"
not_support_fwupgrade	=	"Storage pool contains drives that require a firmware update"
not_support_hybriddisks	=	"Different drive types in storage pool"
not_support_incompatible	=	"Storage pool has drives that are not on the Synology Products Compatibility List."
not_support_passive_fwupgrade	=	"Storage pool on the passive server contains drives that require a firmware update"
not_support_passive_incompatible	=	"Storage pool on the passive server has drives that are not on the Synology Products Compatibility List."
not_support_raidtype	=	"RAID type not supported"
protect_pool_match_condition	=	"To be protected by hot spare drives, a storage pool must meet the following criteria:"
protect_pool_match_condition_tip	=	"Only the storage pools matching the <a class="link-font sm-show-pointer-cursor" href="#">Hot Spare Condition</a> can be selected."
required_size	=	"Required Hot Spare Size"
select_pool_drive	=	"Drive Type"
support_hotspare	=	"Support Hot Spare"
target_type	=	"Type"
target_type_dedicated	=	"Dedicated"
target_type_global	=	"Global"
target_type_shared	=	"Shared"
welcome_desc	=	"An unused drive that meets the hot spare drive criteria can be assigned as a hot spare drive, which can be specified to protect one or more storage pools. When a storage pool degrades, the hot spare drive can automatically repair the failing drive in the storage pool, saving you the hassle of removing the failing drive from the drive slot and replacing it with a new one."
welcome_title	=	"Assign hot spare drives to protect storage pools"
wizard_impossible_spare_condition_4knative	=	"Your selected storage pools must be of the same drive type. For example, storage pools consisting of only 4K native drives, or consisting of only non-4K native drives."
wizard_impossible_spare_condition_crossraid	=	"Your selected storage pools must be from the same device. {0} does not allow hot spare drives to perform cross-device repair."
wizard_impossible_spare_condition_disktype	=	"Your selected storage pools must be of the same drive type."
wizard_no_matched_pool	=	"No storage pools created on this device"

[http_compression]
description	=	"Enable HTTP compression to save bandwidth and speed up the transfer speed between web server and browser when connecting via HTTPS. "
enable	=	"Enable HTTP Compression"
title	=	"HTTP Compression"

[image_selector]
clean_history_confirm	=	"Are you sure you want to clear all previous images?"
default_package_wallpaper_filename	=	"Default"
default_wallpaper	=	"Default Wallpaper"
error_not_an_image	=	"Please select one image"
folder_empty	=	"There are no images in this folder."
history	=	"My Previous Images"
my_image	=	"My Images"
source_upload	=	"Upload"
title_upload_local	=	"Use My Image"

[inetwizard]
apply_ddns	=	"Applying DDNS settings..."
apply_pppoe	=	"Applying PPPoE settings..."
cfgrouter_title	=	"Configure router settings"
config_port_desc	=	"Refer to your router manual for details."
conn_descr	=	"How do you connect the {0} to the Internet?"
conn_title	=	"Network environment"
ddns_prompt	=	"Choose to map the {0} IP to a registered DDNS hostname."
direct_conn_long	=	"Connect using DSL or cable modem or LAN that does not require username and password."
direct_conn_short	=	"Directly connect to the Internet"
final_inetwizard	=	"Applying settings for Internet access..."
finalstep_descr	=	"The {0} is now connected to the Internet."
finalstep_title	=	"Finished"
ftp_servport	=	"FTP service port"
noddns_desc	=	"No. Internet users will access the {0} through IP address."
passiveftp_range	=	"Passive FTP port range"
pppoe_conn_long	=	"Connect using DSL or cable modem that requires username and password."
pppoe_conn_short	=	"Broadband(PPPoE)"
pppoe_disable_msg	=	"Enter the PPPoE username and password. Obtain the information from your ISP."
pppoe_enable_msg	=	"The PPPoE connection is already enabled. Click {0} to continue."
router_conn_long	=	"Connect to a router."
router_conn_short	=	"Through a router"
router_port_desc	=	"Forward the following network ports on your router to the {0}:"
summary_configport	=	"Require forwarding port {1} on your router settings"
summary_conn	=	"Connection method"
summary_direct	=	"Connect directly"
summary_noddns	=	"No"
summary_portforward	=	"Port forwarding"
summary_router	=	"Connect through router"
summary_title	=	"Confirm settings"
summary_useddns	=	"To map to a DDNS hostname"
useddns_desc	=	"Yes. Apply the following DDNS settings:"
web_addport	=	"Additional port for web services"
web_servport	=	"Port for web services"
welcome	=	"The wizard will help you connect your {0} to the Internet."
welcome_title	=	"Welcome to the Internet Access Wizard"
wizard_title	=	"Internet Access Wizard"

[iscsilun]
clone	=	"Clone"
clone_snapshot_inconsistent_warning	=	"Warning: There is at least one connected iSCSI session associated with the LUN ("{0}"). If this LUN is used by Windows Server or VMware ESXi Server, you may install Synology Storage Console to avoid possible data inconsistencies, or you must stop any applications and log off these sessions from the initiators before proceeding. Please refer to help for more information."
cloning	=	"Cloning"
converting	=	"Converting"
data_consistent_snapshot	=	"Application Consistent Snapshots"
defrag	=	"Defrag"
defrag_alert_insufficient_space	=	"Unable to proceed due to insufficient volume space. If the LUN has snapshots, defragmentation may require up to {0} of extra volume space."
defrag_confirm_with_snap	=	"Defragmentation can recover deteriorated LUN performance caused by data fragmentation or snapshots. This may affect the I/O performance but can be stopped at any time. Defragmentation of LUNs with snapshots may require up to {0} of extra volume space."
defrag_confirm_without_snap	=	"Defragmentation can recover deteriorated LUN performance caused by data fragmentation or snapshots. This may affect the I/O performance but can be stopped at any time."
defragging	=	"Defragging"
dr_readonly_register_message	=	"Failed to restore this LUN as it is the destination of replication task(s)."
healthy	=	"Healthy"
iscsilun_allocate_size_field_name	=	"Allocate Size"
iscsilun_allocate_size_title	=	"Allocate the size of LUN"
iscsilun_block_multiple_on_raid	=	"LUN (Block-Level) - Multiple LUNs on RAID"
iscsilun_block_multiple_on_raid_help	=	"This type of LUNs is created on a Disk Group and provides flexibility of dynamic capacity management with optimized access performance."
iscsilun_block_single_on_raid	=	"LUN (Block-Level) - Single LUN on RAID"
iscsilun_block_single_on_raid_help	=	"This type of LUN provides the best access performance."
iscsilun_btrfs_lun	=	"Btrfs LUN"
iscsilun_choose_lun_title	=	"Choose a LUN type"
iscsilun_create_title	=	"LUN Creation Wizard"
iscsilun_disconnect_warning	=	"To prevent LUN or file system from crashing, we recommend that you disconnect the iSCSI initiator from the target before applying new settings.<br /> Are you sure you want to continue?"
iscsilun_expand_raid_by_add_disk	=	"Expand the LUN by adding hard disks"
iscsilun_expand_raid_by_add_disk_help	=	"Choose this option to expand the LUN by adding hard disks."
iscsilun_expand_raid_with_unalloc_space	=	"Expand the LUN with unallocated disk space"
iscsilun_expand_raid_with_unalloc_space_help	=	"Choose this option to expand the LUN with unallocated disk space."
iscsilun_lun_btrfs_file	=	" - LUN on a Btrfs volume"
iscsilun_lun_btrfs_file_help	=	"This type of LUN utilizes the Btrfs file system to provide features of an advanced LUN, including snapshots and Thin Provisioning."
iscsilun_lun_ext4_file	=	" - LUN on an ext4 volume"
iscsilun_manage_title	=	"LUN Manage Wizard"
iscsilun_no_luns	=	"There is no LUN in your system"
iscsilun_remove_cinder_lun_warning	=	"The selected item contains LUN used by the Cinder volume. Deleting it will cause abnormality in accessing the Cinder volume."
iscsilun_remove_summary_desc	=	"Remove LUN"
iscsilun_remove_title	=	"Remove LUN"
iscsilun_repair_raid_help	=	"Choose this option to repair a Degraded LUN. After repairing, if there is unallocated space in the Disk Group, the system will use it to expand the LUN automatically."
iscsilun_select_lun	=	"Please select a LUN from the left."
iscsilun_start_iscsi_service	=	"Start iSCSI Service"
iscsilun_stop_iscsi_service	=	"Stop iSCSI Service"
iscsilun_totalsize	=	"Capacity"
iscsilun_vaai_lun_bad	=	"Unavailable"
iscsilun_vaai_lun_fs_warning	=	"LUNs with advanced LUN features are only available on EXT4 file system."
iscsilun_warning_move_location	=	"Are you sure you want to move the location of this iSCSI LUN?"
iscsitrg_max_snapshot_per_lun	=	"You have reached the maximum number of {0} snapshots per LUN."
no_snapshot	=	"No snapshots"
online_restore_warning	=	"Warning: There is at least one connected iSCSI session associated with the selected LUN ("{0}"). Please make sure to disconnect all the connections from the LUN before restoring the data on the LUN."
restore	=	"Restore"
restore_data_lost_warning	=	"All changes to this LUN since snapshot "{0}" was created will be lost."
restoring	=	"Restoring"
snapshot	=	"Snapshot"
snapshot_application_consistent	=	"Application consistent"
snapshot_crash_consistent	=	"Crash consistent"
snapshot_deleting	=	"Deleting snapshot(s)"
snapshot_filesystem_consistent	=	"File system consistent"
snapshot_lock	=	"Lock"
snapshot_lock_notify	=	"Prevent this snapshot from being automatically removed during the creation of scheduled snapshots."
snapshot_management	=	"Snapshot Manager"
snapshot_manager_list	=	"Registration List"
snapshot_manager_vmware	=	"Snapshot Manager for VMware vCenter Server"
snapshot_manager_vss	=	"Snapshot Manager for Windows"
snapshot_method	=	"Consistent state"
snapshot_restore_confirm	=	"Are you sure you want to restore LUN to snapshot "{0}"?"
snapshot_rotate	=	"When limit is reached"
snapshot_rotate_notify	=	"When the limit of snapshots is reached, the oldest except the locked snapshots will be removed automatically."
snapshot_rotate_off	=	"Don't take snapshots"
snapshot_rotate_on	=	"Remove old snapshots"
snapshot_schedule_enable	=	"Enable snapshot schedule"
snapshot_schedule_task	=	"Set Schedule"
snapshot_schedule_task_name	=	"Snasphot task name"
source	=	"Clone source"
take_snapshot	=	"Take a Snapshot"
unhealthy	=	"Abnormal"
user	=	"User"
using	=	"Processing"

[iscsimgr]
adv_lun	=	"Advanced file-based LUN"
advanced_lun	=	"Advanced LUN"
app_desc	=	"Assist you to manage and monitor iSCSI Services."
app_title	=	"SAN Manager"
appaware_desc	=	"Enable application-consistent snapshots"
appaware_link	=	"Install <b>Synology Storage Console</b> in your Windows or VMware environments to allow _OSNAME_ to take application-consistent snapshots. You can download it at {0}Download Center{1}."
application_keep_all	=	"Keep the original application settings of the selected targets"
block_lun	=	"Block-Level"
block_lun_desc	=	"Provides disk properties (e.g. 4K native Advanced Format) for the initiator without file system cache."
block_lun_subtitle	=	"on Storage Pool"
block_lun_title	=	"Block-Level LUN"
btrfs_lun	=	"Advanced"
btrfs_lun_desc	=	"With the capability of the Btrfs file system, this type of LUN supports Thin Provisioning, instant LUN snapshots and clones, and storage acceleration commands. It also provides better compatibility for VMware VAAI and Windows ODX."
btrfs_lun_subtitle	=	"on Btrfs volume"
btrfs_recmd_description	=	"We highly recommend using the brand new Advanced LUN on Btrfs volume. LUNs created on Btrfs volumes not only support VAAI & ODX storage acceleration features, but also ultra-fast snapshot & cloning capabilities."
btrfs_recmd_title	=	"How to choose between Advanced LUN and Standard LUN?"
buffered_read_write	=	"Buffered read/write"
buffered_read_write_desc	=	"This mode delivers better performances for the environment where data is sequentially accessed on the LUN. For example, dedicated backup storage."
call_resource_monitor_desc	=	"Configure performance alarm rules in {0}Resource Monitor{1} to get notifications when LUN performance reaches custom thresholds."
choose_lun_type_alert	=	"Please choose a LUN type to continue."
convert_btrfs_no_available_capacity	=	"No available Btrfs volume with enough capacity."
convert_no_btrfs_volume	=	"No available Btrfs volume."
direct_io_desc	=	"You may select one of the following ways to access the LUN according to the storage type of your business environments:"
direct_io_mode_label	=	"Direct I/O mode"
direct_read	=	"Direct read"
direct_read_write	=	"Direct read/write"
direct_read_write_desc	=	"This mode delivers better performances for the environment where the storage is composed of solid-state drives in which most data are randomly accessed. For example, VM datastore."
direct_write	=	"Direct write"
eager_zero_lun_mapping_warning	=	"To ensure better performance, the new creating LUN will be zeroized. Befroe the zeroing process finish, iSCSI initiators can not discovery the creating LUN. You can view your process at LUN tab. "
ep_buf_unmap_mode_io	=	"Prioritize I/O Consistency"
ep_buf_unmap_mode_reclaim_balanced	=	"Balanced"
ep_buf_unmap_mode_space_reclaim	=	"Prioritize Reclamation"
ep_buf_unmap_mode_title	=	"Space Reclamation for Legacy Advanced LUN"
err_clone_interrupted	=	"Clone Interrupted."
err_clone_lun	=	"Failed to clone LUN."
err_clone_snap	=	"Failed to clone snapshot."
err_connect_to_isns_server	=	"Failed to connect to the iSNS server."
err_create_communication	=	"Failed to create communication."
err_create_lun	=	"Failed to create LUN."
err_create_target	=	"Failed to create target."
err_delete_locked_snap	=	"Cannot delete locked snapshot."
err_delete_lun	=	"Failed to delete LUN."
err_delete_target	=	"Failed to delete target."
err_disable_target	=	"Failed to disable target."
err_enable_target	=	"Failed to enable the target."
err_get_isns_conf	=	"Failed to get iSNS config."
err_get_ret_policy	=	"Failed to retrieve retention settings."
err_get_sche	=	"Failed to retrieve schedule settings."
err_lun_mapped	=	"LUN is mapped."
err_lunname_duplicated	=	"Duplicated LUN name."
err_map_target	=	"Failed to map target."
err_max_rtt_cfg	=	"You have reached maximum limit of {0} retained snapshots in total."
err_no_memory	=	"Out of memory."
err_no_space	=	"Out of free space."
err_remove_lun_mapping	=	"Failed to remove target mapping."
err_remove_snap	=	"Failed to remove snapshot."
err_set_ret_policy	=	"Failed to configure retention settings."
err_set_sche	=	"Failed to configure schedule settings."
err_take_snap	=	"Failed to take a snapshot."
err_timeout	=	"Timeout."
err_update_acl	=	"Failed to update ACL masking."
err_update_lun	=	"Failed to update LUN."
ext4_lun_subtitle	=	"on ext4 volume"
fctarget_status_desc_abnormal	=	"There was an unknown error with {0} FC port. Please {1}contact us{2} for technical support."
fctarget_status_desc_abnormal_multi	=	"There was an unknown error with {0} FC ports. Please {0}contact us{1} for technical support."
file_lun	=	"Standard"
file_lun_desc	=	"This type of LUN can be set as Thin Provisioning, providing flexibility in capacity management."
file_lun_title	=	"File-Level LUN"
hard_limit_reach	=	"Protected"
instant_snapshot	=	"Instant Snapshot"
io_queue_length	=	"I/O Queue Depth"
io_queue_length_desc	=	"I/O queue depth determines the maximum number of I/O commands that can be queued at one time. Larger queue depths can help enhance I/O throughput in an environment with 10/40 GbE network and SSDs, while setting the queue depth to 1 can help resolve latency or stability issues."
iscsi_service_busy	=	"Service is busy. Please try again later."
iscsilun_convert	=	"Convert"
iscsilun_convert_delete_orig_check	=	"Delete the original LUN and map the target to the new LUN after the conversion."
iscsilun_convert_desc	=	"Convert your LUN"
iscsilun_convert_desc_detail	=	"We now have the brand new Advanced LUN that provides lightning-fast snapshot creation,recovery, cloning, plus VAAI/ODX support for an improved virtual machine performance. This wizard will help you convert your existing LUN to the new Advanced LUN."
iscsilun_convert_mapped_trg_warn	=	"LUN is currently mapped to a target. To ensure data consistency, the LUN will be unmapped from the target during the conversion."
iscsilun_convert_note	=	"Depending on the data size, the conversion may take longer than expected."
iscsilun_convert_rqmt	=	"{0}Requirements{1}</br>1. A Btrfs volume with enough capacity.</br>2. Unmap the LUN from iSCSI targets."
iscsilun_convert_snap_warn	=	"Snapshot detected. All snapshots will be removed after the conversion."
iscsilun_convert_title	=	"Advenced LUN Conversion Wizard"
iscsilun_convert_vol_change_note	=	"The location of the LUN will be changed."
isns_address_invalid	=	"iSNS address is invalid."
isns_info_invalid	=	"iSNS information is invalid."
legacy	=	"Legacy"
log_keyword_invalid	=	"The log keyword is invalid."
low_capacity_write_on_warning	=	"There is sufficient space on the volume but Low-Capacity Write is still enabled. You are recommended to disable the option in SAN Manager."
lun_crash_warning	=	"{0} LUN crashed. Please go to SAN Manager for more information."
lun_create_desc	=	"Create a new LUN and map it to this target."
lun_create_tip	=	"This type of LUN is unavailable. <br>Please create the required volume or storage pool in {0}Storage Manager{1}."
lun_delete_adv_desc	=	"The wizard will remove the following LUN. The processing time depends on your drive size and volume type, please do not shut down the system during the deletion process and wait patiently. After deleting legacy advanced LUN, the space reclamation will run in the background and its speed is under the influence of processing read/write operations. To know the size of reclaiming space, please go to <b>Storage Manager</b> > <b>Volume</b>."
lun_low_capacity_write_on	=	"Volume running out of space. {0} LUN is now in a low-capacity status. Please go to SAN Manager for more information."
lun_mapping_step_subtitle	=	"You can choose to map a target to the LUN now or after the creation of the LUN."
lun_name	=	"LUN name"
lun_no_volume	=	"No available volumes to create LUNs."
lun_reach_hard_limit	=	"Volume ran out of space. {0} LUN is now protected. Please go to SAN Manager for more information."
lun_reach_soft_limit	=	"Volume running out of space. {0} LUN is now protected. Please go to SAN Manager for more information."
lun_space_warning	=	"Less than 10% of free space on the volume. {0} LUN will become protected when the threshold is reached. Please go to SAN Manager for more information."
lun_status_desc_cache_crash	=	"{0} LUN is unavailable because the SSD cache has crashed. Please go to Storage Manager for more information."
lun_status_desc_cache_crash_multi	=	"{0} LUNs are unavailable because the SSD cache has crashed. Please go to Storage Manager for more information."
lun_status_desc_clone_fail	=	"{0} LUN crashed because the system failed to copy it. Please remove the crashed LUN."
lun_status_desc_clone_fail_multi	=	"{0} LUNs crashed because the system failed to copy them. Please remove these crashed LUNs."
lun_status_desc_hard_limit	=	"{1} ran out of space. {0} LUN became read-only status to prevent a filesystem crash. It is possible that the operating system cannot mount the LUN properly nor access the data. Please refer to {2}this FAQ article{3} for more information."
lun_status_desc_hard_limit_multi	=	"{1} ran out of space. {0} LUNs became read-only status to prevent a filesystem crash. It is possible that the operating system cannot mount the LUNs properly nor access the data. Please refer to {2}this FAQ article{3} for more information."
lun_status_desc_soft_limit	=	"Less than 10% of remaining space on {1}. {0} LUN on the volume will become protected to prevent filesystem crash when there is less than 1 GB of free volume space. You will not be able to write data to the protected LUN. Please expand {1} in {4}Storage Manager{5} and refer to {2}this FAQ article{3} for more information."
lun_status_desc_soft_limit_multi	=	"Less than 10% of remaining space on {1}. {0} LUNs on the volume will become read-only to prevent a filesystem crash when there is less than 1 GB of free volume space. When this happens, it is possible that the operating system cannot mount the LUNs properly nor access the data. Please refer to {2}this FAQ article{3} for more information."
lun_status_desc_unavailabling	=	"{0} LUN crashed. Please contact Synology Support for assistance."
lun_status_desc_unavailabling_multi	=	"{0} LUNs crashed. Please contact Synology Support for assistance."
lun_status_desc_volume_crash	=	"{0} LUN is unavailable because the volume has crashed. Please go to Storage Manager for more information."
lun_status_desc_volume_crash_multi	=	"{0} LUNs are unavailable because the volume has crashed. Please go to Storage Manager for more information."
lun_status_desc_volume_degrade	=	"{0} LUN is in danger due to the degraded volume. Please go to Storage Manager for more information."
lun_status_desc_volume_degrade_multi	=	"{0} LUNs are in danger due to the degraded volume. Please go to Storage Manager for more information."
lun_type	=	"Lun Type"
lun_up_to_max	=	"You have reached the maximum number of LUNs."
luns_crash_warning	=	"{0} LUNs crashed. Please go to SAN Manager for more information."
luns_low_capacity_write_on	=	"Volume running out of space. {0} LUNs are now in a low-capacity status. Please go to SAN Manager for more information."
luns_reach_hard_limit	=	"Volume ran out of space. {0} LUNs are now protected. Please go to SAN Manager for more information."
luns_reach_soft_limit	=	"Volume running out of space. {0} LUNs are now protected. Please go to SAN Manager for more information."
luns_space_warning	=	"Less than 10% of free space on the volume. {0} LUNs will become protected when the threshold is reached. Please go to SAN Manager for more information."
map_exist_lun_desc	=	"Mapped LUN will not be shown in the list."
map_exist_target_desc	=	"Mapped targets will not be shown in the list."
network_binding_all_if	=	"All network interfaces"
network_binding_desc	=	"You can select specific network interfaces to access this iSCSI target."
network_binding_only_selected_if	=	"Only selected interfaces"
next_time_msg	=	"{0} {1} later"
no_map_lun_desc	=	"Map later"
no_map_target_desc	=	"Create a standalone iSCSI LUN."
no_snapshot_manager	=	"No Synology Storage Console has been registered."
optimized_bandwidth	=	"Optimized for bandwidth"
optimized_latency	=	"Optimized for latency"
replication	=	"Replication"
ret_all_desc	=	"Always retain snapshots"
ret_all_snap	=	"Retain all snapshots"
ret_all_tip	=	"Unable to take new snapshots upon reaching the limit."
ret_daily	=	"daily snapshots (One snapshot per day)"
ret_daily_short	=	"daily"
ret_del_old	=	"Specify the number of the latest snapshots to retain"
ret_del_old_summary	=	"Retain {0} latest snapshots"
ret_desp	=	"Determine how many snapshots will be retained, and earlier snapshots will be removed accordingly.{0} This configuration is shared by local snapshot and replication tasks."
ret_hourly	=	"hourly snapshots (One snapshot per hour)"
ret_hourly_short	=	"hourly"
ret_keep_all	=	"Keep the original retention policy of the selected targets"
ret_late_snap	=	"The latest snapshot and those taken within 1 hour before the latest snapshot will be reserved."
ret_monthly	=	"monthly snapshots (One snapshot per month)"
ret_monthly_short	=	"monthly"
ret_pol_desc	=	"Retain snapshots with the following policy:"
ret_recent_num	=	"Retain {0} latest snapshots"
ret_title	=	"Retention"
ret_weekly	=	"weekly snapshots (One snapshot per week)"
ret_weekly_short	=	"weekly"
ret_yearly	=	"yearly snapshots (One snapshot per year)"
ret_yearly_short	=	"yearly"
run_retention_immed	=	"Once you click OK, the retention settings will take effect immediately."
sche_exec_day	=	"Select days"
sche_keep_all	=	"Keep the original schedule settings of the selected targets"
sche_repeat_every	=	"Frequency"
sche_repeat_until	=	"Repeat until"
sche_start_at	=	"Starting at"
selected_targets_operation_deny	=	"The operation is not allowed for the following selected targets:"
sink	=	"Replica"
sink_lun	=	"Replica LUN"
snap_can_restore	=	"Restore points"
snap_filter_no_protected	=	"No Scheduled Protection"
snap_filter_with_replica	=	"Scheduled Replication"
snap_filter_with_schedule	=	"Scheduled Snapshot"
snap_last_time	=	"Last snapshot"
snap_last_time_msg	=	"{0} {1} ago"
snap_list	=	"Snapshot List"
snap_local_snapshot	=	"Local Snapshot"
snap_lun_all	=	"All LUNs"
snap_no_schedule	=	"No schedules."
snap_ret_time	=	"Retention Policy"
snap_schedule_snapshot_type	=	"Type"
snap_snapshot_schedule	=	"Schedule"
snap_up_to_max	=	"The maximum number of snapshots has been reached."
soft_limit_reach	=	"Volume space running out"
standard_lun	=	"Standard LUN"
status_desc_crit	=	"Your iSCSI services have {0} unread critical event."
status_desc_good	=	"All SAN services are working well."
status_desc_warn	=	"Your iSCSI services have {0} unread warning event."
status_no_protection	=	"No Scheduled Protection"
status_processing	=	"Processing"
status_replica	=	"Replicated"
status_schedule	=	"Scheduled"
status_volume_crash_title	=	"Volume Crashed"
target_create_desc	=	"Create a new target and map it to this LUN."
target_managed_by	=	"Managed by {0}"
target_mapped	=	"mapped"
target_name	=	"Target name"
target_status_desc_abnormal	=	"{0} target is abnormal. Please contact Synology Support for assistance."
target_status_desc_abnormal_multi	=	"{0} targets are abnormal. Please contact Synology Support for assistance."
target_up_to_max	=	"The maximum number of Targets has been reached."
thin_lun	=	"Thin-provisioning file-based LUN"
type_manual_snapshot	=	"Manual Snapshot"
unmap_command_qtip	=	"Enable the unmap command."
unmap_command_warn	=	"The modified setting on unmap command will be applied after reconnecting to LUN."
unmap_no_desc	=	"(Without space reclamation)"
unmap_yes_desc	=	"(With space reclamation)"
unread	=	"Unread"
unread_crit	=	"Unread (Critical)"
unread_warn	=	"Unread (Warning)"

[iscsitrg]
iscsitrg_advance_desc	=	"The advanced mode provides features such as SCSI-3 Persistent Reservation, MC/S, and masking."
iscsitrg_advance_enable	=	"Enable advanced mode"
iscsitrg_advanced	=	"Advanced file LUN"
iscsitrg_auth_chap	=	"CHAP"
iscsitrg_auth_mutual_chap	=	"Mutual CHAP"
iscsitrg_auth_none	=	"None"
iscsitrg_basic_invalid	=	"General settings have not been completed."
iscsitrg_checksum_data	=	"Data digest"
iscsitrg_checksum_header	=	"Header digest"
iscsitrg_copy_iqn	=	"Copy IQN"
iscsitrg_delete_confirm	=	"Delete mapped LUNs as well"
iscsitrg_delete_warning	=	"The wizard will remove the iSCSI target ({0}) and any mapped LUNs you have selected. During the process, please do not shut down the system."
iscsitrg_disable	=	"Disable"
iscsitrg_disable_confirm	=	"Are you sure you want to disable the selected iSCSI target(s)?"
iscsitrg_disconnect_warning	=	"To prevent LUNs or file systems from crashing, we recommend that you disconnect the iSCSI initiator from the target first.<br/> Are you sure you want to continue?"
iscsitrg_enable	=	"Enable"
iscsitrg_enable_auth_chap	=	"Enable CHAP"
iscsitrg_enable_auth_mutual_chap	=	"Enable Mutual CHAP"
iscsitrg_enable_confirm	=	"Are you sure you want to enable the selected iSCSI target(s)?"
iscsitrg_error_bad_password	=	"Numbers and English letters only. 12 to 16 characters."
iscsitrg_error_bad_targetname	=	"The target name you entered is invalid, please refer to Help for more information."
iscsitrg_error_bad_username	=	"Numbers and English letters only. Maximum of 12 characters."
iscsitrg_error_msg	=	"Failed to set "_NAME_". _ERRNO_"
iscsitrg_error_same_as_password	=	"The CHAP password cannot be the same as the mutual CHAP password."
iscsitrg_exceed_total_volume_size	=	"The total size of iSCSI must be less than the total volume size."
iscsitrg_file_type	=	"LUN type"
iscsitrg_form_crc_checksum	=	"CRC Checksum"
iscsitrg_initiator_iqn	=	"Initiator IQN"
iscsitrg_iqn_copied	=	"The following IQN has been copied:<br />{0}"
iscsitrg_iqn_exists	=	"The target IQN already exists."
iscsitrg_isns	=	"iSNS"
iscsitrg_isns_enable	=	"Enable iSNS"
iscsitrg_isns_server	=	"iSNS Server"
iscsitrg_lun_create	=	"Create a new LUN"
iscsitrg_lun_delete_warning	=	"This action will remove all data and configurations. Are you sure you want to continue?"
iscsitrg_lun_name_exists	=	"The name already exists."
iscsitrg_map_existent_lun	=	"Map existing LUNs"
iscsitrg_map_existent_target	=	"Map existing iSCSI target"
iscsitrg_mapped_lun	=	"Mapped LUNs"
iscsitrg_mapped_no_luns	=	"No mapped LUNs"
iscsitrg_mapped_no_targets	=	"No mapped iSCSI targets"
iscsitrg_mapped_target	=	"iSCSI target mapping"
iscsitrg_mapping	=	"Mapping"
iscsitrg_mask_warning_description	=	"New permission settings will become effective after iSCSI initiator is reconnected."
iscsitrg_mask_warning_title	=	"Note"
iscsitrg_masking	=	"Masking"
iscsitrg_masking_default	=	"Default privileges"
iscsitrg_max_lun_per_target	=	"You can map up to {0} LUNs to the iSCSI target "{1}"."
iscsitrg_max_recv_segment	=	"Maximum receive segment bytes"
iscsitrg_max_send_segment	=	"Maximum send segment bytes"
iscsitrg_misc_setting	=	"Misc Settings"
iscsitrg_multi_sessions	=	"Multiple Sessions"
iscsitrg_multi_sessions_desc	=	"Allow multiple sessions from one or more iSCSI initiators"
iscsitrg_multi_sessions_warning	=	"To avoid risk of significant data corruption, please make sure you are operating in a cluster aware filesystem."
iscsitrg_name_exists	=	"The target name already exists."
iscsitrg_network_binding	=	"Network Binding"
iscsitrg_no_fcport	=	"No FC adapters"
iscsitrg_no_iscsitrg	=	"There is no iSCSI target in your system"
iscsitrg_other_params	=	"Miscellaneous"
iscsitrg_permission	=	"Permission"
iscsitrg_regular	=	"Regular file LUN"
iscsitrg_remove_cinder_target_warning	=	"The selected iSCSI target is being used by the Cinder volume. Deleting it will cause abnormality in accessing the Cinder volume."
iscsitrg_restore_to_smaller_size_with_replication	=	"Restoring this LUN will cause the failure of all related replication tasks. You will have to manually create the replication tasks again."
iscsitrg_select_iscsitrg	=	"Please select an iSCSI target from the left"
iscsitrg_select_luns	=	"Please select LUNs"
iscsitrg_select_targets	=	"Please select iSCSI targets"
iscsitrg_set_failed_space_not_enough	=	"There is not enough free space on this volume."
iscsitrg_size_too_small	=	"You are not allowed to decrease the capacity."
iscsitrg_space_prealloc	=	"Pre-allocate space"
iscsitrg_status	=	"Status"
iscsitrg_status_connected	=	"Connected"
iscsitrg_status_disconnecting	=	"Disconnecting"
iscsitrg_status_moving	=	"Migrating"
iscsitrg_status_offline	=	"Offline"
iscsitrg_status_online	=	"Ready"
iscsitrg_target_create	=	"Create a new iSCSI target"
iscsitrg_thin_provisioning	=	"Thin Provisioning"
iscsitrg_thin_provisioning_notify	=	"1. Thick Provisioning provides better stability in LUN performance.</br>2. Thin Provisioning supports all advanced features but may cause a filesystem crash on the LUN when volume runs out of space."
iscsitrg_thin_provisioning_warning	=	"The LUN capacity ({0}) exceeds the remaining capacity of {2} ({1}). The LUN will become protected to prevent <span class="red-status">file system crash</span> when the volume is running out of space. You are recommended to set a smaller LUN or expand the volume. Are you sure you want to continue?"
iscsitrg_title_adv	=	"Advanced"
iscsitrg_title_authen	=	"Authentication"
iscsitrg_title_basic	=	"General"
iscsitrg_trim	=	"Pass TRIM command from iSCSI initiator to SSD"
iscsitrg_use_vaai_or_not_description	=	"{0}Learn more{1} about the advanced features."
iscsitrg_use_vaai_or_not_title	=	"What are Advanced LUN features?"
iscsitrg_vaai	=	"Advanced features"
iscsitrg_vaai_16k	=	"16KB"
iscsitrg_vaai_32k	=	"32KB"
iscsitrg_vaai_4k	=	"4KB (Optimized for Windows ODX)"
iscsitrg_vaai_64k	=	"64KB"
iscsitrg_vaai_8k	=	"8KB (Optimized for VMware VAAI)"
iscsitrg_vaai_extent_size	=	"Allocation Unit Size"
iscsitrg_vaai_extent_size_notify	=	"The allocation unit size of each volume can be set only once. Please refer to help for more information."
iscsitrg_vaai_location_notify	=	"ext4 volumes support only legacy Advanced LUN features. LUNs on Btrfs volumes with Advanced LUN features are recommended due to their instant snapshots and faster cloning capabilities."
iscsitrg_vaai_lun_delete_warning	=	"This action will remove LUNs with advanced LUN features. It might take some time to release allocated space. Are you sure you want to continue?"
iscsitrg_vaai_notify	=	"Space reclamation releases free storage space, such as when files are deleted. Enabling this option may affect the performance."
iscsitrg_warning_actioning	=	"Changes cannot be made while iSCSI target is configuring."
iscsitrg_warning_lun_actioning	=	"Changes cannot be made while LUN is configuring."
iscsitrg_warning_move_location	=	"Are you sure you want to move the location of this iSCSI target?"
iscsitrg_warning_move_lun_location	=	"Are you sure you want to change this LUNs location?"

[itunes]
itunes_after	=	"is after"
itunes_album	=	"Album"
itunes_all	=	"all"
itunes_any	=	"any"
itunes_artist	=	"Artist"
itunes_before	=	"is before"
itunes_bitrate	=	"Bit Rate"
itunes_bpm	=	"BPM"
itunes_comment	=	"Comment"
itunes_contains	=	"contains"
itunes_date	=	"Date Modified"
itunes_date_added	=	"Date Added"
itunes_days	=	"days"
itunes_del_rule	=	"Delete the selected rule."
itunes_del_rule_title	=	"Delete Rule"
itunes_empty_pls	=	"Please enter the playlist name."
itunes_empty_value	=	"The value of [{0}] cannot be empty."
itunes_enable	=	"Enable iTunes Service"
itunes_err_val	=	"Please state the rule of [{0}]."
itunes_error_date_format	=	"The value of [{0}] must be date in the yyyy-mm-dd format."
itunes_error_num_format	=	"The value of [{0}] must be a positive number."
itunes_genre	=	"Genre"
itunes_greater	=	"is greater than"
itunes_input	=	"(value)"
itunes_is	=	"is"
itunes_is_not	=	"is not"
itunes_kind	=	"Kind"
itunes_last	=	"is in the last"
itunes_length_warn	=	"The length has exceeded the limitation."
itunes_less	=	"is less than"
itunes_match	=	"match the following rule:"
itunes_match_one	=	"Match the following rule:"
itunes_match_op	=	"Match {0} of the following rules:"
itunes_months	=	"months"
itunes_new_plylst	=	"Create"
itunes_new_rule	=	"Add a rule."
itunes_new_rule_title	=	"Add Rule"
itunes_not_contains	=	"does not contain"
itunes_not_last	=	"is not in the last"
itunes_passwd	=	"Require password"
itunes_path	=	"File Path"
itunes_pl_name_used	=	"The name of the smart playlist already existed. Please enter a different name."
itunes_playlist_name	=	"Name"
itunes_rules	=	"Rule"
itunes_shared_name	=	"Shared name"
itunes_smart_playlist	=	"Smart Playlist"
itunes_symbol_warn	=	"[{0}] can't enter specific character {1}"
itunes_unknown_error	=	"The smart playlist is not available or editable."
itunes_warn	=	"All iTunes clients will be disconnected when applying settings. Are you sure you want to continue?"
itunes_weeks	=	"weeks"
itunes_year	=	"Year"
reach_rule_max	=	"Number of a playlist rules has reached its limit."
rule_min	=	"There should be at least one rule for creating the smart playlist."

[java]
enable_java	=	"Browse files from local computer with File Station"
enable_java_desc	=	"Note: You may need to sign in to _OSNAME_ again or refresh your web browser to apply the changes."
prompt_reopen	=	"Please restart your web browser to experience the new features."

[keymanager]
app_title	=	"Key Manager"
ckbox_automount_migration	=	"Migrate all encryption keys to this key store for safekeeping (applicable to shared folders created on or before DSM 6.0 that were automatically mounted)."
ckbox_change_passphrase	=	"Change passphrase"
ckbox_conflict_policy	=	"Overwrite duplicate keys"
common_cypher	=	"Cypher"
common_initialize	=	"Initialize"
common_machinekey	=	"Machine key"
common_migrate	=	"Migrate now"
common_mount_on_boot	=	"Mount on Boot"
common_new_passphrase	=	"New passphrase"
common_new_passphrase_confirm	=	"Confirm new passphrase"
common_passphrase	=	"Passphrase"
common_passphrase_confirm	=	"Confirm passphrase"
common_status	=	"Status"
common_unencrypted	=	"Unencrypted"
common_unknown	=	"Unknown"
common_unknown_cypher	=	"Unknown cypher"
dst_keystore	=	"Destination Key Store"
eject_after_boot	=	"Eject device after boot"
error_invalid_passphrase	=	"Incorrect passphrase."
error_used_keystore	=	"Your NAS server initiated a key store in this location previously. To avoid data conflict, please choose a USB storage device that does not contain a key store."
fs_autokey_migrate	=	"Key Migration"
fs_cypher_info	=	"Cypher Information"
fs_encryption_cypher	=	"Select Cypher for Key"
fs_encryption_key	=	"Encryption Key"
fs_encryption_share	=	"Select Encrypted Folder"
fs_store_info	=	"Key Store Information"
fs_store_location	=	"Key Store Location"
info_launch_keymanager	=	"Passphrase has been changed successfully. Please use the new passphrase to restart Key Manager."
init_dialog_confirm	=	"Enable"
init_dialog_msg	=	"You can manage all encryption keys of different encrypted folders in Key Manager."
init_dialog_title	=	"Enable Key Manager now?"
initialization_desc	=	"Key Manager allows you to manage the keys of encrypted shared folders and decrypt multiple shared folders at the same time."
initialization_recommend_desc	=	"Please select a location to store the encryption keys in Key Manager. An <b>external USB device</b> is recommended for better security."
src_keystore	=	"Source Key Store"
store_location	=	"Key store location"
tip_cypher	=	"Passphrase: The key can be decrypted by anyone who knows the passphrase.<br>Machine key: The key can only be decrypted by this Synology NAS."
tip_location	=	"For security purpose, it’s recommended to store your Key Manager on an external USB drive."
title_automount_migration	=	"Migrate Encryption Keys"
warning_wait_for_key_export	=	"The time required for exporting keys varies with models and the number of keys to be exported. Do you want to export keys now?"
win_title_config	=	"Key Store Configuration"
win_title_init	=	"Initialize Key Store"
win_title_new_key	=	"Add Key"
win_title_passphrase_verify	=	"Verify Passphrase"

[language]
lang_codepage	=	"Codepage"
lang_codepage_hint	=	"Select the codepage for non-Unicode filename conversion."
lang_display	=	"Display Language"
lang_display_field	=	"Display language"
lang_display_hint	=	"Select the default display language. (Users can also change their personal display language on the Options page.)"
lang_email	=	"Notification Language"
lang_email_field	=	"Notification language"
lang_email_hint	=	"Select the language for email, SMS notifications, and mobile push notifications."
lang_sms	=	"SMS Language"
lang_sms_field	=	"SMS language"
lang_sms_hint	=	"Select the language for sms notification."
refresh_confirm	=	"The selected language will be applied after refreshing the webpage. All running application will be closed. Would you like to refresh the webpage now?"

[lcm]
lcm_desc	=	"Set LCM display password to prevent unauthorized users from changing program settings using LCM display."
lcm_password	=	"Password"
lcm_password_confirm	=	"Confirm password"
lcm_password_enable	=	"Enable LCM display password protection"
lcm_title	=	"LCM Display"

[ldap]
append_base_dn	=	"Append Base DN"
auth_title	=	"Authentication"
base_dn	=	"Base DN"
bind_account	=	"Bind DN or LDAP administrator account"
bind_auth_desciption	=	"Please enter the following information to continue."
bind_dn	=	"Bind DN"
bind_title	=	"Bind to LDAP Server"
ca_private_key	=	"Private key"
change_password_desc	=	"Click {0} to update your LDAP account settings."
client_info	=	"Connection Information"
client_title	=	"LDAP"
config_client	=	"Client"
domino_not_support_tls	=	"Domino does not support STARTTLS"
enable_ldap_client	=	"Enable LDAP Client"
enable_ssl	=	"Enable SSL/TLS"
err_connect_fail_with_tls_reqcert_enabled	=	"Unable to join the directory. Ensure the following:<br/><ul style="list-style-type: disc; list-style-position: inside; text-indent: -1.4em; padding-left: 1.4em;"><li>Network settings are properly configured.</li><li>The server address is a domain name.</li><li>The client and server certificates are valid and trusted.</li></ul>"
gid_mapping	=	"Enable GID mapping"
group_member_attr	=	"Group member attribute"
idmap_support	=	"Enable UID/GID shifting"
idmap_support_tips	=	"Enable this option to avoid UID/GID conflicts between LDAP and local users/groups (applicable for non-Synology LDAP services only)."
join_alert	=	"Unable to join this LDAP server due to the following reason:"
join_confirm	=	"Joining this LDAP server will affect the following services. Do you want to proceed?"
ldap_client	=	"LDAP client"
ldap_client_certificate_note	=	"This certificate will also be applied to the LDAP Server package on your _DISKSTATION_."
ldap_client_certificate_tips	=	"You must upload a client certificate when joining Google's LDAP server."
ldap_domain_conflict	=	"This _DISKSTATION_ cannot be joined to any domain because it is already an LDAP client."
ldap_enable_client_certificate	=	"Enable client certificate"
ldap_schema_tips	=	"<ul style="list-style-type: disc;"><li>In RFC2307bis, "memberOf" is a user object attribute that refers to the group where users belong.</li><li>In RFC2307, "memberUID" is a group object attribute that refers to users of a group.</li></ul>"
ldap_server	=	"LDAP server address"
ldap_upload_client_certificate	=	"Upload Client Certificate"
ldap_upload_client_certificate_title	=	"Upload client certificate"
ldap_user_home_enable	=	"Enable home service for LDAP users"
leave_alert	=	"You cannot leave or change LDAP server because of the following reasons:"
leave_confirm	=	"If you leave or change LDAP server, the following services will be affected. Do you want to continue?"
login_check_password_desc	=	"Your password will expire in {0} days. Please change your password."
manual_base_dn	=	"Please enter the Base DN of the LDAP Server."
no_nested_group	=	"Do not expand nested groups"
no_ssl	=	"None"
profile_advance	=	"Edit"
profile_customized	=	"Custom"
profile_domino	=	"IBM Lotus Domino"
profile_mac	=	"Open Directory"
profile_origin	=	"Filter/Attribute"
profile_standard	=	"Standard"
profile_target	=	"Mapping Target"
profile_title	=	"Profile"
protocol	=	"Protocol"
rebind	=	"Rejoin LDAP"
security_type	=	"Encryption"
server_info	=	"Server information"
set_host_first	=	"Please set the LDAP server address first."
smb_support	=	"Enable Windows CIFS support"
smb_support_pam	=	"Enable CIFS plain text password authentication"
smb_support_pam_tips	=	"You may need to modify the registry settings of your Windows clients before accessing files stored on this _DISKSTATION_ via CIFS (applicable for non-Synology LDAP services only). Please refer to {0}this article{1} for more information."
smb_support_tips	=	"Depending on the type of the LDAP server, you might need to modify your Windows client's registry settings before accessing the files on the _DISKSTATION_ via CIFS. Refer to Help for more information."
syno_server	=	"Synology LDAP Server"
tls_reqcert_tips	=	"Enable this option to verify the LDAP server's certificate. You can only join the directory if the certificate is valid."
uid_mapping	=	"Enable UID mapping"
update_ldap_data	=	"Update LDAP Data"
upload	=	"Upload"
validate_server_certificate	=	"Verify server certificate"
with_sasl	=	"SASL"
with_ssl	=	"SSL/TLS"
with_tls	=	"STARTTLS"

[ldap_error]
ldap_cifs_pam_enabled	=	"Since CIFS plain text password authentication is enabled, this _OSNAME_ cannot be the remote mount target of CIFS."
ldap_confidentiality_required	=	"Encrypted connection is required by the LDAP server."
ldap_gid_already_exists	=	"GID is already existed."
ldap_groupname_already_exists	=	"The group name already exists. Please enter a different one."
ldap_idmap_enable_warning	=	"UID/GID shifting is for use with non-Synology LDAP servers only. Please refer to Help for more information."
ldap_inappropriate_auth	=	"LDAP server does not allow anonymous binding. Please check your base DN, bind DN, and password."
ldap_insufficient_access	=	"Permission denied. Please contact the server administrator."
ldap_invalid_credentials	=	"Invalid credentials. Please check your account name and password."
ldap_invalid_dn_syntax	=	"Invalid DN format."
ldap_no_such_object	=	"{0} doesn't exist on the LDAP server. It may be removed by the administrator. Please refresh the page and try again later."
ldap_ntpassword_not_accessible	=	"Failed to access NT passwords of certain LDAP users, and Samba service may thus not work properly for these users. This may be caused by targeted LDAP server's lack of NT passwords, or insufficient privileges of the bind DN in use."
ldap_operations_error	=	"Failed to connect to the LDAP server. Please check the server address and your network settings."
ldap_protocol_error	=	"Failed to connect to the LDAP server. Please try again later."
ldap_server_not_support	=	"The LDAP server is not supported."
ldap_smb2_enable_warning	=	"When the CIFS-related option is enabled, the system will set the "Maximum SMB protocol" to SMB 1 and disable the SMB-related Bonjour service (at Control Panel > File Services > Service Discovery)."
ldap_timelimit_exceeded	=	"The operation timed out. Please contact the administrator of the LDAP server."
ldap_uid_already_exists	=	"UID is already existed."
ldap_username_already_exists	=	"The user name already exists. Please enter a different one."
ldap_weak_pwd	=	"This password may be too short, too weak, too common, or has been used before. Please enter another one."

[led_brightness]
adjust_tip_desc	=	"Drag the slider to adjust the brightness of LED indicators."
led_brightness_desc	=	"LED Brightness Control"
schedule_led_adjust	=	"Adjusted brightness"
schedule_led_default	=	"Default brightness"
schedule_tip_desc	=	"Select the specific time slots to apply adjusted LED brightness."
set_schedule	=	"Set Schedule"
slider_led_default	=	"Default"
slider_led_off	=	"Off"

[license]
connection_retry_desc	=	"I want to retry activation on my _DISKSTATION_"
default_app_name	=	"Synology Application"
duration_month	=	"Extension time (month)"
error_connection	=	"Failed to connect to Synology server."
error_installed_key	=	"You have already installed these licenses on your _DISKSTATION_."
error_local_delete	=	"Failed to delete the licenses from your _DISKSTATION_."
error_server_system	=	"System error. Please try again or contact the Synology Support Team."
extend	=	"Extend"
extend_indirect_desc_step_web	=	"Sign in to {0} and go to License to select the desired licenses. Enter license keys to extend their validity."
extend_welcome_desc	=	"<div style="line-height:18px;font-size:12px;">This wizard will guide you through extending license validity with the unactivated license key.<br><br>Please read through the following requirements:<ul style='padding-left:20px;'><li style='list-style-type:disc;list-style-position:outside;'>The license to be extended and the unactivated license key should match in terms of application type and license number.</li><li style='list-style-type:disc;list-style-position:outside;'>You can only apply unactivated license keys for validity extension.</li><li style='list-style-type:disc;list-style-position:outside;'>Overdue licenses cannot be extended.</li></ul></div>"
extend_welcome_headline	=	"Welcome"
extend_wizard_title	=	"Extend Licenses"
extended_expire_time	=	"Extended to:"
first_activate_date_string	=	"Activated Date"
follow_step_desc	=	"Please follow the steps to import your licenses:"
installed_on	=	"Currently installed on"
insufficient_license_notice	=	"Notice: License cannot be deleted because software will not work properly with insufficient licenses."
license_account_desc	=	"Please sign in with your Synology Account credentials to activate your licenses."
license_account_sub_title	=	"Add licenses to your Synology Account for easier management."
license_account_title	=	"Link with Synology Account"
license_add_wizard_title	=	"Add License"
license_agreement_desc	=	"<div style="padding:8px 8px 0 8px;">Thank you for purchasing the license for {0}. Please read the following agreement statements:</br></br><ul style='padding-left:20px;list-style:disc;'><li>This license key can be applied to only one _DISKSTATION_ server at a time.</li><li>This license key cannot be distributed or provided to any third party.</li><li>If the license key is not activated and lost, no replacement will be issued.</li><li>This license key and the information of your _DISKSTATION_, including serial number, MAC address, and model name, will be sent back to Synology for validation. We will not collect any personal data during validation.</li></ul></br>If you agree with the terms above, click Agree to continue.</div>"
license_agreement_sub_title	=	"Please read the following license agreement for {0} before proceeding."
license_agreement_title	=	"Check License Agreement"
license_delete_annotation	=	"Please note that the following licenses will be deleted."
license_delete_wizard_title	=	"Delete License"
license_enter_key_annotation	=	"*You can paste multiple license keys here."
license_enter_key_sub_title	=	"Please enter the license key(s) displayed on your card(s)."
license_enter_key_title	=	"Enter License Keys"
license_error_connect	=	"Connection error"
license_error_internal	=	"Internal error"
license_expire_date_string	=	"Expiry Date"
license_export_file	=	"Download"
license_indirect_desc_step_export	=	"Export your _DISKSTATION_ configuration file to your computer."
license_indirect_desc_step_import	=	"Download the license file from the Synology Account website and import it here."
license_indirect_desc_step_web	=	"Sign into {0}, and go to the License page to upload the configuration file to activate your license key."
license_indirect_title	=	"Activate via Synology Account website"
license_install_date_string	=	"Install Date"
license_invalid_key_apptype	=	"This license key is not compadible with this product."
license_invalid_key_duplicate	=	"You have already entered this key."
license_invalid_key_id	=	"This is an invalid license key."
license_invalid_key_not_exist	=	"The license is not installed in the _DISKSTATION_."
license_key_string	=	"License key"
license_list_num	=	"License count"
license_no_connection_check	=	"I want to activate the licenses via the Synology Account website"
license_no_connection_desc	=	"Your _DISKSTATION_ cannot find an Internet connection. To activate the licenses, please make sure your _DISKSTATION_ is well connected and try again, or go to the Synology Account website to complete the activation:"
license_no_connection_title	=	"Internet Connection Not Found"
license_num_string	=	"License Quantity"
license_result_delete_fail	=	"Failed to delete the licenses."
license_result_fail_desc	=	"License activation failed. Please try again or contact the Synology Support Team."
license_result_fail_sub_title	=	"Failed to add the licenses."
license_result_fail_title	=	"Error"
license_result_login_fail	=	"Please sign in to your Synology Account."
license_result_success_desc	=	"You have successfully activated {0} licenses for {1} on your _DISKSTATION_."
license_result_success_sub_title	=	"Your licenses have been successfully added."
license_result_success_title	=	"You Are All Set"
license_result_unknown_desc	=	"Errors occurred with the licenses you have entered for {1}. Please try again or contact Synology support for assistance."
license_result_unknown_sub_title	=	"Errors occurred with your licenses."
license_status_expire_string	=	"Expired"
license_status_invalid_string	=	"Invalid"
license_status_prepared_string	=	"Not activated"
license_status_reactivated_string	=	"Reactivated"
license_status_string	=	"Status"
license_status_validate_string	=	"Validated"
license_string	=	"Licenses"
license_to_activate	=	"Licenses to activate"
license_total_string	=	"Total"
license_type_free	=	"Free license"
license_unused_string	=	"Unused"
license_used_string	=	"Used"
list_desc	=	"Select the license keys you want to activate on or migrate to this Synology Router."
list_title	=	"Select license keys"
local_delete_confirm	=	"Failed to connect to the Synology server. To successfully deactivate these licenses, you must remove them from the Synology Account webpage and also remove them locally. Do you want to first remove the licenses from your _DISKSTATION_ locally?"
migration_desc	=	"Some of the license key selected are currently installed on other Synology products. If  you choose to migrate them to this Synology product, you will not be able to use the license key on any other Synology products. Are you sure to proceed?"
migration_title	=	"Migration Detected"
result_extend_fail_subtitle	=	"Failed to extend the license."
result_extend_success_desc	=	"You have successfully extended validity of the licenses on your _DISKSTATION_."
result_extend_success_subtitle	=	"License validity is successfully extended."
summary_desc	=	"Please confirm the details of the licenses."
summary_title	=	"Confirm License Information"
tip_error_license_registered	=	"The licenses have already been registered by another Synology Account."
tip_error_license_used	=	"The license key is already activated. Please apply an unactivated license key for validity extension."
tip_error_reactivated	=	"The license key is activated on another Synology product. Please deactivate the license key there first."
total_duration_month	=	"Total extension (month):"
total_num	=	"Total licenses"

[localbkp]
deselect_conflict_source_share	=	"The following backup source shared folder(s) will be deselected:"
localbkp_backup_share	=	"Backup folder"
localbkp_bkpset_exist	=	"Duplicate backup task names are found. Please choose a different name."
localbkp_bkpset_name	=	"Task"
localbkp_cancel	=	"Cancel Backup"
localbkp_check_dest_size	=	"Checking source file size"
localbkp_dest	=	"Destination"
localbkp_dest_conflict_bkpshare	=	"The selected folder is the same as your destination folder."
localbkp_dest_status	=	"Status"
localbkp_detail	=	"Get Info"
localbkp_detail_info	=	"Information"
localbkp_full_bkp	=	"Full backup"
localbkp_immediate	=	"Back up now"
localbkp_incr_bkp	=	"Reserve the backed up files at the destination"
localbkp_invalid_char_desc	=	"Invalid characters for the backup task name: ! " # $ % & ' ( ) * + , / : ; < = > ? @ [ ] \ ^ ` { } | ~"
localbkp_max_bkpset	=	"The number of task has reached the system limit."
localbkp_not_bkp	=	"No backup yet"
localbkp_wait_dest	=	"Searching for destination folder. Please wait..."
localbkp_wait_sync	=	"Please wait..."
recover_footer_desc	=	"Progress of local restoration:"

[localbkpwizard]
backup_set_desc	=	"Name your backup task to distinguish between different tasks"
backup_set_title	=	"Create a backup task"
bkp_disk_selection_title	=	"Select backup disk"
final_descr	=	"The backup task <b>{0}</b> has been created."
finalstep_title	=	"Task Created"
format_desc	=	"Destination drive has not been formatted, select a file system and format now."
localbkp_day	=	"Backup Days"
localbkp_time	=	"Backup Time"
select_dest_desc	=	"Select a destination from the external disk or the system shared folder."
select_dest_title	=	"Select a destination"
select_share_title	=	"Select shared folders to back up"
set_schedule_title	=	"Set up a backup schedule"
summary_title	=	"Confirm settings"
welcome	=	"The wizard will help you do the following:<p><ul><li>Enter backup task name.</li> <li>Select shared folder(s) to backup.</li> <li>Select a destination from the external disk or the system shared folder.</li> <li>Set up a backup schedule.</li></ul><p>"
welcome_title	=	"Welcome to the Local Backup Wizard"
wizard_format_disk_title	=	"Format Disk"
wizard_start_backup	=	"Back up immediately after the wizard is finished"
wizard_title	=	"Local Backup Wizard"

[log]
alert_level	=	"Alert"
attr_keyword	=	"Keyword"
backup	=	"Backup"
crit_level	=	"Critical"
csv_type	=	"CSV"
date_custom	=	"Customize"
date_from	=	"From"
date_lastmonth	=	"Last Month"
date_lastweek	=	"Last Week"
date_range	=	"Date Range"
date_to	=	"To"
date_today	=	"Today"
date_yesterday	=	"Yesterday"
debug_level	=	"Debug"
disk_related	=	"Drives"
emerg_level	=	"Emergency"
error_level	=	"Error"
error_pgsql_is_upgrading	=	"Database is upgrading. Please wait till upgrade is finished."
file_transfer	=	"File Transfer"
general	=	"General"
html_title	=	"VPN Server Log"
html_type	=	"HTML"
info_level	=	"Info"
log_access_time	=	"Last Accessed"
log_account	=	"User"
log_action	=	"Event"
log_afp_xfer	=	"AFP"
log_all	=	"All"
log_cfrm_clear	=	"All logs will be cleared. Are you sure you want to continue?"
log_clear	=	"Clear"
log_client	=	"Client Name and IP"
log_download_failed	=	"Failed to download the log file."
log_file_folder	=	"File/Folder"
log_filebrowser_xfer	=	"File Station"
log_filename	=	"File name"
log_filesize	=	"File size"
log_ftp_xfer	=	"FTP"
log_host	=	"Host Name"
log_link_backup	=	"Backup"
log_link_backup_desc	=	"Logs of operations and events of the backup."
log_link_backup_server	=	"Backup Destination"
log_link_connection	=	"Connection"
log_link_connection_desc	=	"Logs of the connection information."
log_link_copy	=	"USBCopy/SDCopy"
log_link_copy_desc	=	"Event logs of USBCopy/SDCopy."
log_link_current_conn	=	"Current connection"
log_link_current_conn_desc	=	"List the users who are now accessing the system."
log_link_netbkp	=	"Network Backup"
log_link_netbkp_desc	=	"Logs of operations and events of the Network Backup."
log_link_system	=	"System"
log_link_system_desc	=	"Logs of operations and events."
log_not_exist	=	"No log exists!"
log_reload	=	"Refresh"
log_resource	=	"Resource"
log_save	=	"Save"
log_smb_xfer	=	"SMB"
log_subtitle	=	"View Logs"
log_tftp_xfer	=	"TFTP"
log_time	=	"Time"
log_type	=	"Type"
log_viewer_title	=	"System Logs"
log_webdav_xfer	=	"WebDAV"
log_webfm_xfer	=	"File Station log"
logattr	=	"Level"
more_item	=	"Customize"
no_active_log	=	"No active logs"
no_ietf_log_available	=	"No logs in IETF format available"
no_log_available	=	"No logs available"
notice_level	=	"Notice"
reset	=	"Reset"
search	=	"Search"
sha	=	"High Availability"
title_select_desc	=	"Select the item(s) you want to search"
total	=	"Total"
warn_level	=	"Warning"
warning_log_clean	=	"Are you sure you want to remove all of the high-availability logs on this server?"

[loganalyzer]
abnormal_login_desc	=	"Abnormal login activities have been detected."
abnormal_login_detail	=	"Someone logged in to your DSM as __USER__ with __IP__ from __COUNTRY__."
abnormal_login_purpose	=	"Attackers may use an unrecognized IP address to sign in to an existing user account and perform malicious attacks."
abnormal_login_recommand	=	"If __IP__ was not you, account information may have been leaked. Please refer to the following options to enhance account security:<br><ul style='list-style:disc;list-style-position:inside;'><li>Replace the current password with a stronger one (at Control Panel > User & Group > User > Edit)</li><li>Enable 2-factor authentication (at Control Panel > Security)</li><li>Limit user access by specific IP (at Control Panel > Application Privileges)</li></ul>"
abnormal_login_symptom	=	"Someone logged in as __USER__ with __IP__."
brute_force_attack_desc	=	"Password guessing occurs {1} times within {0} minutes (brute force attacks)."
brute_force_attack_detail	=	"Someone attempted to sign in as __USER__ by trying passwords but failed (brute force attacks). __ATTEMPT_COUNT__ failed logins were detected within __THRESH_MINUTES__ minutes from __COUNTRY_LIST__ using the following IPs: __SRC_IP_LIST__. Attacked services: __PROTOCOL_LIST__."
brute_force_attack_purpose	=	"Attackers may attempt to log in by trying an exhaustive number of passwords."
brute_force_attack_recommand	=	"Someone attempted to crack the password of __USER__ with __PROTOCOL_LIST__ from __COUNTRY_LIST__. Please refer to the following options to enhance account security:<br><ul style='list-style:disc;list-style-position:inside;'><li>Enable Auto Block (at Control Panel > Security > Protection)</li><li>Enable Account Protection (at Control Panel > Security > Protection)</li><li>Replace the current password with a stronger one (at Control Panel > User & Group > User > Edit)</li><li>Enable 2-factor authentication (at Control Panel > Security)</li><li>Limit user access by specific IP (at Control Panel > Application Privileges)</li></ul>"
brute_force_attack_symptom	=	"Someone attempted to log in as __USER__ by trying passwords."

[login]
2fa_account_recover_desc	=	"Don’t have any of these?"
account_login	=	"Sign in to DSM"
account_recover_desc	=	"Can’t sign in?"
action_emerg_code	=	"Get emergency code"
action_reset_password	=	"Reset password"
admin_hint	=	"If you are in the local administrator group of this _DISKSTATION_, please refer to {0}this FAQ{1} to learn how to reset your password."
agree_privacy_statement	=	"By completing email verification, you acknowledge that you have read and agreed to <a class="link-font" target="_blank" href="https://www.synology.com/company/legal/privacy">Synology Privacy Statement</a>."
amfa_email_send_failed	=	"Adaptive MFA is enabled to protect your account, but the system is unable to send the verification code to your email. Refer to this <a href="https://sy.to/resetamfa" target="_blank">article</a> for further information."
apply	=	"OK"
azure_sso_login	=	"Entra ID SSO Authentication"
back	=	"Back"
backup_email_cannot_change	=	"If you are unable to change your backup email, please contact your system administrator."
backup_email_continue_alert	=	"Please verify your backup email to continue."
backup_email_desc	=	"Please set up a backup email. If you lose your mobile device, an emergency verification code will be sent to the mailbox below."
backup_email_err_empty	=	"Please set up a backup email."
backup_email_err_format	=	"Invalid email format."
btn_forget_pass_submit	=	"Change"
btn_use_passwd	=	"Password Login"
btn_use_weblogin	=	"Browser Login"
cancel	=	"Cancel"
change_pass_desc	=	"Set a new password for your account."
change_pass_title	=	"Change password"
change_success_desc	=	"Your password has been changed. Please sign in again with your new password."
change_success_title	=	"Success!"
check_mail_title	=	"Check your email"
check_status_title	=	"Getting ready..."
choose_login_account	=	"Choose login account"
confirm_cannot_receive_verification	=	"Cannot receive the verification request?"
confirm_kick_self	=	"Are you sure you want to kill your own connection?"
confirm_need_help	=	"Need help?"
confirm_no_receive_verification	=	"Don't see the verification request?"
copyright	=	"Copyright © {0} Synology Inc. All rights reserved."
current_ip_changed	=	"The currently connected IP has been changed to {0}."
date_format	=	"{2}, {0} {1}"
date_format_with_year	=	"{2}, {0} {1} {3}"
date_format_without_week	=	"{0} {1}"
default_welcome_msg	=	"The best storage space where we can share all our memories"
default_welcome_msg_business	=	"The most secure place to centralize and manage your valuable information"
default_welcome_title	=	"Hello there, welcome!"
default_welcome_title_business	=	"Welcome to Data Center"
domain_options_sync_time_enable	=	"_DISKSTATION_ will synchronize with an NTP server every time a domain user logs in"
end_connections	=	"End Connections"
endpoint_not_accessible	=	"Failed to connect to LDAP server."
enter_otp_desc	=	"6-digit code"
enter_verification_code	=	"Enter verification code"
error_account_locked	=	"This account has been locked because it has reached the maximum number of failed login attempts allowed within a specific time period. Please contact the system administrator."
error_bademail	=	"Invalid email format."
error_cantlogin	=	"The account or password is invalid. Please try again."
error_corrupted_otp_system_files	=	"Unable to sign in due to configuration errors. Contact your administrator to {0}reset 2FA{1} or {2}reset NAS{3}."
error_corrupted_system_files	=	"Unable to sign in due to system configuration errors. Please contact your system administrator to {0}reset your Synology NAS{1}."
error_error_system	=	"Unable to perform this operation, possibly because the network connection is unstable or the system is busy. Please try again later."
error_expired	=	"Your account has been deactivated. Please contact the administrator."
error_guest	=	"Cannot log in as guest. Please use another account to log in."
error_interrupt	=	"You have signed in on another computer. Please log in again."
error_key_invalid	=	"Because the encryption key is invalid, the password has been transmitted as plain text without encryption."
error_max_tries	=	"This IP address has been blocked because it has reached the maximum number of failed login attempts allowed within a specific time period. Please contact the system administrator."
error_maxtried	=	"You have incorrectly entered your account or password too many times. Please contact system administrator for authorization."
error_noprivilege	=	"You are not authorized to sign in to this _DISKSTATION_. Please contact admin for authorization."
error_not_support_2fa_in_mobile	=	"Your administrator requests that you set up 2-factor authentication. Please use a browser on a computer to configure it first and sign in again."
error_otp_failed	=	"Wrong verification code. Please try again."
error_otp_not_number_failed	=	"Only numbers allowed. Please try again."
error_pgsql_is_upgrading	=	"Updating database. Please sign in later."
error_pwd_expired	=	"The password of this account has expired. Please contact the system administrator."
error_system_getting_ready	=	"System is getting ready."
error_system_not_ready	=	"System is getting ready. Please log in later."
error_systemfull	=	"You cannot sign in to the system because the drive space is currently full. Please restart the system and try again."
error_timeout	=	"Connection expired. Please sign in again."
error_unexpected_login	=	"Unexpected login error. Please try again later or {0}contact us{1} if this problem persists."
error_unknown_error	=	"Unable to sign in to the system. Please try again later or contact <a href="https://account.synology.com/support" target="_blank">Synology Technical Support</a> if this problem persists."
error_upgrading	=	"Booting up system. Please log in later."
exclude_common_password	=	"Exclude common passwords, such as "12345678" or "P@ssw0rd""
exclude_username	=	"Exclude user name and description"
finish	=	"Finish"
forget_pass_change_pass_ok	=	"Successfully changed password!"
forget_pass_comfirm_password	=	"Confirm password"
forget_pass_comfirm_password_error	=	"Sorry, the passwords you entered did not match. Please try again."
forget_pass_enter_password	=	"Please enter a new password."
forget_pass_enter_user_name	=	"Please enter your username."
forget_pass_link	=	"Forgot your password?"
forget_pass_msg_ask_admin	=	"Please ask your administrator to reset your password."
forget_pass_msg_check_mail	=	"Please check your email for instructions to reset your password."
forget_pass_msg_error	=	"Cannot change password. Please return to the login page and try again."
forget_pass_msg_forbidden	=	"You cannot use this function now."
forget_pass_msg_incorrect_ticket	=	"Cannot change password. Please return to the login page and try again."
forget_pass_msg_no_user	=	"Sorry, the username you entered doesn't exist."
forget_pass_msg_user_not_allowed	=	"Your password cannot be reset via email. Press and hold the physical reset button on your Synology device to restore default passwords."
forget_pass_new_password	=	"New password"
forget_pass_user_name	=	"Username"
forgot_form_desc	=	"Enter your username to send a password reset email."
forgot_form_title	=	"Forgot your password?"
get_redirect_info_fail	=	"Failed to get redirection information."
included_numeric_char	=	"Include numeric characters"
included_special_char	=	"Include special characters"
is_weblogin_failback_password	=	"Unable to obtain verification information. Do you want to use the password of the remote NAS to verify instead?"
kick_connection	=	"Kill Connection"
login_account_admin	=	"System administrator (admin)"
login_account_other	=	"Other account"
login_apply_preview	=	"Do you want to apply the settings?"
login_enter_password	=	"Enter password"
login_forgetpw	=	"Forgot your password?"
login_now	=	"Log in Now"
login_photo_desc	=	"An auto-built service for you to have online albums easily."
login_web_desc	=	"A simple service for you to build a web site easily."
mail_sent_desc	=	"Email has been sent. Please check your inbox. If you are unable to locate the email in your inbox, please refer to {0}this article{1} for more information."
mail_service_not_enable	=	"Email notification service is not enabled. Please ask your administrator to reset your password."
min_length_default	=	"{0} is the default username. The minimal password length is {1} characters."
min_length_enable	=	"Minimal password length"
mixed_case	=	"Include mixed case"
mon_1	=	"Jan"
mon_10	=	"Oct"
mon_11	=	"Nov"
mon_12	=	"Dec"
mon_2	=	"Feb"
mon_3	=	"Mar"
mon_4	=	"Apr"
mon_5	=	"May"
mon_6	=	"Jun"
mon_7	=	"Jul"
mon_8	=	"Aug"
mon_9	=	"Sep"
msg_ask_admin	=	"Please consult the system administrator to solve this problem."
msg_waiting	=	"Processing. Please wait..."
need_longer_password	=	"Use a longer password"
next	=	"Next"
no_mail_address	=	"You have not set up an email address for this account."
no_support_ie_browser	=	"Support from this browser's publisher has ended. Please use another browser for enhanced browsing experience."
ok	=	"  OK  "
old_password	=	"Original Password"
onlinersc	=	"Online Resources"
onlinersc_desc	=	"Click on the links to obtain Synology's online resources"
other_ways	=	"Other sign-in methods"
otp_account_name	=	"Account"
otp_auth_failed	=	"Code authentication failed. Please make sure the secret key you entered is correct or try synchronizing the system time of your mobile device and _OSNAME_."
otp_auth_field	=	"6-digit verification code"
otp_code	=	"Verification code"
otp_edit_desc	=	"Enter the following account name and secret key into your authenticator app."
otp_emerg_code_success	=	"An emergency code has been sent to your email address."
otp_emergency_code_resend_button	=	"Resend"
otp_enter_manually_link	=	"You can also enter your secret key manually."
otp_err_email_required	=	"An email address is required."
otp_err_pwd_chg_not_login	=	"Login with the new password is required before obtaining the emergency code. Please contact the admin if you cannot access your mobile device."
otp_finish_step_title	=	"2-factor authentication has been enabled for your account"
otp_install_app_desc	=	"Please install an authenticator app on your mobile device. If you have not installed one yet, _OSNAME_ supports the following authenticator apps: {0}."
otp_lost_device_desc	=	"Can't sign in with the OTP?"
otp_lost_device_extra_desc	=	"Did not receive the verification code? Click the link below to resend the code or contact your administrator to {0}reset 2FA{1} or {2}reset Synology NAS{3}."
otp_lost_phone_desc	=	"Lost your phone?"
otp_mail_success	=	"An emergency code has been sent to your email address."
otp_no_emergency_code	=	"You have exceeded your emergency code limit. Please contact your system administrator."
otp_receive_emergency_code_msg	=	"Did not receive the emergency code ?"
otp_save_config_failed	=	"Unable to save settings."
otp_scan_qrcode_desc	=	"Scan the QR code on the left to open and configure your authenticator app."
otp_secret_key	=	"Secret key"
otp_support_apps_link	=	"Google Authenticator (Android and iOS)"
otp_wizard_confirm_code_desc	=	"Please enter the 6-digit code shown in the app."
otp_wizard_confirm_code_title	=	"2. Enter the verification code (OTP)"
otp_wizard_scan_qrcode	=	"1. Scan the QR code"
otp_wizard_scan_qrcode_failed	=	"Can't scan it?"
otp_wizard_scan_qrcode_with_app	=	"Use the camera in the app to scan the QR code below."
otp_wrong_input_format	=	"Please enter a 6-digit verification code or 8-digit emergency code."
passwd_expired	=	"Password expired. Set a strong new password."
passwd_stronger	=	"Set a stronger password"
password	=	"Password"
password_formation_rules	=	"Include mixed-case letters, special characters, and numeric characters"
password_in_history	=	"The password you set must be different from the previously used ones."
password_in_min_age_domain	=	"The password cannot be set because the current password has not exceeded the minimum password age.<br/><br/>Please contact the domain administrators to manually reset the password."
password_too_common	=	"The password you set is not strong enough."
pgsql_still_update_desc	=	"It takes longer than expected to update the system database. Package updates will start after the system database update is complete."
pgsql_timeout_desc	=	"It takes longer than expected to update the system database. Package updates will start after the system database update is complete. You can sign in to _OSNAME_ now, and the updates will continue in the background."
pgsql_timeout_title	=	"Still working..."
pgsql_upgrade_desc	=	"System database update is in progress. It takes about 15 minutes to complete."
pgsql_upgrade_title	=	"Getting ready... ({percentage}%)"
photos_migrating_moments_personal	=	"Upgrading Configurations... ({current}/{total})"
photos_migrating_moments_shared	=	"Migrating Shared Photo Library from Synology Moments... ({current}/{total})"
photos_migrating_photostation	=	"Upgrading Database... ({current}/{total})"
photos_migrating_photostation_personal	=	"Migrating Personal Photo Station albums... ({current}/{total})"
photos_upgrade_desc	=	"The migration to Synology Photos is currently ongoing. This is the last step before all update tasks are complete. You can sign in to _OSNAME_ now. All photos and videos will be available in Synology Photos after the migration is complete."
photos_upgrade_title	=	"Updating Synology Photos Database.."
pkg_prepare_title	=	"Starting to update packages..."
pkg_repairing_desc	=	"Package update may take some time. You can sign in to _OSNAME_ now, and the updates will continue in the background."
pkg_repairing_no_signin_desc	=	"Package update may take some time."
pkg_repairing_title	=	"Updating {package_name}... ({current}/{total})"
plugin_otp_desc	=	"Use verification code (OTP)"
plugin_otp_tip	=	"Open your authenticator app to get a verification code."
plugin_password_desc	=	"Enter password"
popup_blocked_desc	=	"Unable to open the login pop-up window. Please click <b>Allow</b> to enable pop-ups and continue signing in."
possible_reasons_are	=	"Please set a strong password by following these rules: {0}"
qrcode_login_title	=	"QR Code Login"
redirecting	=	"Redirecting. Please wait."
rememberme	=	"Stay signed in"
remote_network_error	=	"{0} may be inaccessible due to firewall restrictions or self-signed certificates, would you still like to use the browser to sign in? When unable to access the destination, use your password to sign in."
saving	=	"Saving..."
select_a_way_title	=	"Select sign-in method"
send_mail	=	"Send"
send_verification_device	=	"To make sure it's really you signing in, we have sent a verification request to your {0}."
send_verification_devices	=	"To make sure it's really you signing in, we have sent a verification request to your {0} and {1}."
server_no_mail_service	=	"Email notification has not been enabled on the LDAP server."
sign_in	=	"Sign In"
sign_in_anyway	=	"Sign in to _OSNAME_ now"
skip	=	"Skip"
sso_continue_with	=	"Continue with {0}"
sso_invalid_format_msg	=	"Your SSO is not properly configured. Please check your settings or contact your system administrator."
sso_login	=	"SSO Authentication"
sso_oidc_mismatch_url_error_msg	=	"Unable to sign in because this URL is different from the SSO settings. Please try again."
step	=	"Step"
submit	=	"Submit"
trustdevice	=	"Don't ask again on this device"
try_another_way	=	"Try another sign-in method"
try_another_way_title	=	"Try another method"
two_step_verification	=	"2-factor authentication"
unknown_otp_err	=	"An error occurred. Please contact your system administrator."
unknown_otp_extra_err	=	"An error occurred. Contact your administrator or {0}reset Synology NAS{1}."
unverified	=	"Unverified"
upgrade_ie_browser	=	"Please upgrade to the latest version of Internet Explorer browser to get the best quality."
upgrading_dont_reboot	=	"Please do not shut down the system during this process."
user_email	=	"Email"
username	=	"Username"
verification_code_sent_desc	=	"An emergency verification code has been sent to {0}. Please check your mailbox and fill in the code within 5 minutes."
verify_reject_desc	=	"Unable to sign in because you denied the verification request sent to your mobile device."
verify_you_desc	=	"Open Synology apps and tap <b>Yes</b>."
verify_you_email_desc	=	"We will send a verification email to {0}. Please check your mailbox and click the link in the email to verify your email address."
verify_you_email_sent_desc	=	"To make sure it's really you signing in, we have sent a verification code to {0}. Please check your mailbox and fill in the code within 5 minutes."
verify_you_email_title	=	"Verify your email"
verify_you_note	=	"You can use the following Synology apps to verify your identity:"
verify_you_one_app_desc	=	"Open {0} and tap <b>Yes</b>."
verify_you_title	=	"Verify it's you"
view_otp	=	"View OTP"
waiting	=	"Signing in. Please wait..."
websphere_sso_login	=	"WebSphere SSO Authentication"
weekday_0	=	"Sun"
weekday_1	=	"Mon"
weekday_2	=	"Tue"
weekday_3	=	"Wed"
weekday_4	=	"Thu"
weekday_5	=	"Fri"
weekday_6	=	"Sat"
wizard_err_get_key	=	"Having issues getting the secret key or QR code? Please contact Synology Technical Support."
wizard_err_set_mail	=	"Unable to configure the backup email. Please contact your system administrator for assistance."
wizard_header	=	"2-Factor Authentication Wizard"
wizard_install_step_desc	=	"Please install Synology Secure SignIn or Google Authenticator on your mobile device."
wizard_install_step_syno_authenticator	=	"Download Synology Secure SignIn"
wizard_install_step_title	=	"Install authenticator app"
wizard_mail_step_desc	=	"Please set up a backup email. If you lose your mobile device, an emergency verification code will be sent to the mailbox below."
wizard_mail_step_title	=	"Set up backup email"
wizard_verify_step_title	=	"Scan the QR code to receive a verification code on your mobile device"
wizard_welcome_step_desc	=	"To strengthen account security and protect your _OSNAME_ account, the administrator has made 2-factor authentication mandatory.<br><br>Once you have set it up, you will enter your password along with a verification code to sign in to _OSNAME_ or mobile apps. You can receive a verification code even when your mobile device is offline.<br><br>{0}Note: {1}To avoid any difficulties, make sure you have installed the latest version of all Synology apps."
wizard_welcome_step_title	=	"2-factor authentication is mandatory"

[login_portal]
network_editor_header	=	"Edit Login Settings"
network_option_header	=	"Options"
network_tab_title	=	"Web Services"

[lunbkp]
backup_welcome_title	=	"Welcome to the LUN Backup Wizard"
bkpwizard_title	=	"LUN Backup Wizard"
cancel_link	=	"Cancel restoration"
client_id	=	"Directory"
data_bkp_task	=	"Data backup task"
data_restore	=	"Data"
dest_shared_folder	=	"Destination folder"
dest_vol_select	=	"Select the destination volume"
dest_vol_select_desc	=	"Select the destination volume to restore the LUN"
directory_desc	=	"Select the directory where the LUN is kept"
directory_title	=	"Select the source directory"
enumlun	=	"Search LUN"
err_lun_inuse	=	"The selected LUN is being used by another task. Please try again later."
err_no_available_lun	=	"There is no LUN in the system, or all LUNs have been used by other LUN backup tasks."
local_lun_restore	=	"Local LUN Restoration"
local_lun_restore_desc	=	"Restore LUN from an external disk or a system shared folder."
local_lunbkp	=	"Local LUN Backup"
local_lunbkp_desc	=	"Back up LUN to an external disk or a system shared folder."
lun_bkp_task	=	"LUN backup task"
lun_damaged_error	=	"The LUN is damaged or corrupted. Please select another LUN as backup source and try again."
lun_dd_error	=	"Backup failed because the backup destination is running out of space, or the connection to the destination server was lost."
lun_dest_path_error	=	"The operation failed due to a destination path error. Please make sure the destination path and shared folder both exist."
lun_in_use_error	=	"The LUN is being backed up by another user. Please try again later. "
lun_is_vaai_or_block	=	"The LUN will be backed up as a file image at the destination. If restored, block LUNs will be changed to regular file LUNs. Are you sure you want to continue?"
lun_missing_error	=	"Failed to locate the LUN. Please make sure the directory path or the location of the LUN is not modified on the source server, and then try again."
lun_restore	=	"LUN"
lun_restore_welcome_desc	=	"The wizard will help you do the following: <p><ul><li>Select the restoration type.</li><li>Select the source server and the restoration contents.</li><li>Select the destination volume for restoring backups.</li><li>Restore LUN.</li></ul></p>"
lun_restore_welcome_title	=	"Welcome to the LUN Restoration Wizard"
lun_source	=	"Backup source"
lun_unsupport_dest_fs	=	"LUN backup is not support by the file system of the backup destination."
lunbkp_currupted_error	=	"The operation failed due to a data error on the destination. Please contact our support team for assistance."
lunbkp_iscsi_con_fail	=	"The iSCSI connection failed."
name_after_restored	=	"Destination LUN"
net_lunbkp	=	"Network LUN Backup"
net_lunbkp_desc	=	"Back up LUN to another {0} server."
network_lun_restore	=	"Network LUN Restoration"
network_lun_restore_desc	=	"Restore LUN from another {0} server."
out_of_resource_error	=	"Insufficient system resources. Please try again later."
restore_lun	=	"Restore LUN"
restwizard_title	=	"LUN Restoration Wizard"
search_dest_volume	=	"Searching for available volumes, please wait..."
search_directory	=	"Searching for available directories, please wait..."
search_lun_source	=	"Searching for available LUNs, please wait..."
select_lun_desc	=	"Select a LUN as backup source"
select_lun_title	=	"Select a LUN to backup"
server_version_error	=	"Please update the _OSNAME_ of the destination server to _OSNAME_ 4.0 or onward and try again."
soft_feasibility_check_failed	=	"Hyper Backup: The backup tasks for the following LUNs will be deleted: {0}"
source_folder_desc	=	"Select a shared folder as the source for restoring your LUN"
source_folder_title	=	"Select the source shared folder"
task_id	=	"Folder"
warning_deleting_lun	=	"The following LUNs are the source of at least one backup task: {0}. Removing a source LUN will also delete the corresponding backup task. Do you want to continue?"

[mail]
account_already_saved	=	"This account already exists."
add_email_desc	=	"Please select one email service provider:"
add_email_title	=	"Add an email account"
application_title	=	"Email"
auth_failed	=	"Authentication failed. Please go to Options > Email Account in your _OSNAME_ and check your email account and password."
contact_synced	=	"Synced"
default_account	=	"Default email address"
default_alert	=	"Your default account has been disabled, please modify your default account."
default_use	=	"Default"
default_use_checkbox	=	"Use this email account as the default"
delete_confirm	=	"Are you sure you want to delete this email account?"
delete_default_alert	=	"This is set as the default account. Please change your default account before deleting it."
delete_last_one	=	"If you have 2-factor authentication enabled, you should retain one email address to receive the emergency code when in need."
email_setting_alert	=	"Are you sure {0} is a {1} account?"
email_setting_not_exist	=	"The sender email address does not exist. Please click OK to set up the email address."
email_settings_title	=	"Set up email account"
email_wizard_title	=	"Email Account Setup Wizard"
filedir_limit_alert	=	"Only files can be attached."
filenum_limit_alert	=	"You can only attach {0} files at most."
filesize_limit_alert	=	"The total size of attachments cannot exceed {0} MB."
mail_account	=	"Email Account"
mail_account_limit	=	"You can enter multiple email addresses separated by ";". A total of 10 unique email addresses is allowed for the 3 profiles combined."
mail_address_invalid	=	"Invalid email address"
mail_attachment	=	"Attachment"
mail_authentication	=	"Authenticate"
mail_authentication_success	=	"Authentication successful"
mail_cancel_authentication	=	"De-authenticate"
mail_cc_desc	=	"Cc"
mail_click_edit	=	"Click here to edit email"
mail_contact_error	=	"Cannot get contact information."
mail_data_failed	=	"The attachment exceeds the maximum size allowed by your email service provider."
mail_data_format_error	=	"Some email service providers do not support delivering email content that includes domain names. Please make sure no domain names are mentioned in the email content or attachments and then try again."
mail_default_provider	=	"Please choose your default email service provider."
mail_delivery	=	"Email Delivery"
mail_from_desc	=	"From"
mail_gmail_desc	=	"In order to use this service, authentication with your Gmail account is required. Simply enter your Gmail credentials in the pop-up window, and your contacts will be synced automatically when the authentication is completed."
mail_gmail_status	=	"Authenticated"
mail_gmail_title	=	"Authenticate with Gmail"
mail_leave_desc	=	"Do you want to discard this mail?"
mail_outlook_desc	=	"In order to use this service, authentication with your Outlook account is required. Simply enter your Outlook credentials in the pop-up window, and your contacts will be synced automatically when the authentication is completed."
mail_outlook_title	=	"Authenticate with Outlook"
mail_reauth	=	"Re-authenticate"
mail_receiver_failed	=	"Delivery to the following recipient failed: {0}"
mail_sender_failed	=	"Unable to perform this operation due to an error with your email address. Please enter a correct email address and try again."
mail_setting_alert	=	"Please set up your email account in Options > Email Account first."
mail_setting_error	=	"Connection failed. Please check your settings and try again."
mail_setup_hint	=	"You need to set up your email account first. Do you want to do this now?"
mail_setup_in_dsm	=	"Please sign in to _OSNAME_ and set up an email account first."
mail_smtp_failed	=	"SMTP is not configured properly, or the server cannot be reached."
mail_subject	=	"Subject"
mail_subject_alert	=	"Do you want to send this email without a subject?"
mail_syncpage_desc	=	"Do you want to sync your email contacts now?"
mail_syncpage_note	=	"If you want to sync contacts of an email account different from the one previously entered, please manually switch to the desired account in the window that appears."
mail_test_connection	=	"Test Connection"
mail_to_desc	=	"To"
mail_to_email_address	=	"Recipient's email address"
mailto_alert	=	"Please specify at least one recipient."
no_account_alert	=	"Click Add to add an email account"
open_desc	=	"Send as email attachments"
outlook_account_error	=	"Your outlook account have not been verified, please sign in and verify your outlook account"
sender_name_hint	=	"If blank, the email address that you specified above will be used."
set_default	=	"Set as default"
sync_contact	=	"Sync contacts"
sync_expire	=	"You have not successfully synced your {0} contacts, or the syncing has expired."
sync_fail	=	"Syncing unsuccessful"
sync_success	=	"Syncing successful"
synomail_desc	=	"You can send emails through your Synology MailPlus email account."
unsync_contact	=	"Unsync contacts"

[mailstation]
mailstation_client_desc	=	"Enable following client protocols to receive mails via mail clients, e.g. Outlook."
mailstation_client_title	=	"Mail receiving settings"
mailstation_disabled	=	"Mail Server is not enabled."
mailstation_fqdn	=	"Domain name"
mailstation_fqdn_desc	=	"Enter a FQDN (Fully Qualified Domain Name) to deliver and receive mails from the domain."
mailstation_fqdn_title	=	"Mail domain settings"
mailstation_imap_disable_confirm	=	"Disabling IMAP will also disable webmail service. Are you sure you want to continue?"
mailstation_imap_enable	=	"Enable IMAP"
mailstation_imaps_enable	=	"Enable IMAP SSL/TLS"
mailstation_message_size_limit	=	"Maximum size per email"
mailstation_pop3_enable	=	"Enable POP3"
mailstation_pop3s_enable	=	"Enable POP3 SSL/TLS"
mailstation_server_title	=	"Mail server settings"
mailstation_smtp_auth_enable	=	"SMTP Authorization is required"
mailstation_smtp_desc	=	"Enable SMTP to deliver and receive mails."
mailstation_smtp_enable	=	"Enable SMTP"
mailstation_smtp_force_tls	=	"Secure connection (SSL/TLS) required"
mailstation_spamfilter_enable	=	"Enable spam filter"
mailstation_webmail_attachment_size	=	"Maximum attachment size"
mailstation_webmail_enable	=	"Enable Webmail (IMAP will be enabled automatically)"
mailstation_webmail_recommend	=	"Go to "Main Menu" > "Package Center" > "Available" to install the Mail Station package, which allows you to run webmail service on your _DISKSTATION_."
mailstation_webmail_title	=	"Webmail settings"

[mainmenu]
app_name	=	"Backup and<br>Restore"
apptitle	=	"_OSNAME_ Help"
backup_replication	=	"Hyper Backup"
ezinternet	=	"EZ-Internet"
leaf_control_panel	=	"Control Panel"
leaf_filebrowser	=	"File Station"
leaf_packagemanage	=	"Package<br>Center"
leaf_rsrcmonitor	=	"Resource<br>Monitor"
logcenter	=	"Log Center"
report	=	"Storage Analyzer"
storage_manager	=	"Storage Manager"
support_center	=	"Support Center"
sysinfo_title	=	"System<br>Information"
texteditor	=	"Text Editor"
welcome_app_title	=	"Quick Start"

[mariadb]
need_upgrade	=	"MariaDB databases are currently running in compatible mode. Please run MariaDB to upgrade databases first."

[media_index_service]
app_name	=	"Media Indexing"
application_list	=	"Applications"
description	=	"Media Indexing can automatically scan multimedia files, such as photos, music, and videos stored on your _DISKSTATION_, and index them for multimedia applications.<br><br>Please note that only the image files under the shared folder “<b>/photo</b>” will be added to Synology Photos after the Shared Space is enabled."
description_index_service	=	"Media Indexing can automatically scan multimedia files such as photos, music, and videos stored on your _DISKSTATION_, and index them for multimedia applications."
description_router	=	"Media Indexing can automatically scan multimedia files, such as photos, music, and videos stored on your _DISKSTATION_, and index them for multimedia applications."
hybrid_share_transform_warning	=	"The indexing service is currently using this shared folder. To convert this folder, please go to <b>Control Panel</b> > <b>Indexing Service</b> > <b>Media Indexing</b> > <b>Indexed Folder</b> to delete this folder."
indexing_status	=	"Status"
note	=	"Indexed Folder settings do not apply to Synology Photos and Video Station."
status_checking	=	"Checking..."
status_done	=	"Completed"

[mediaservice]
albumart_list_mediaservice	=	"Filenames"
btn_customize_menu	=	"Customize"
btn_debuglog_mediaservice	=	"Download"
btn_devicelist	=	"Device list"
btn_diagnosis_mediaservice	=	"Diagnose"
btn_reindex	=	"Re-index Files"
btn_reindex_media_data	=	"Re-index"
buffersetting_label	=	"Streaming Buffer Setting"
by_allfolders	=	"By all folders"
by_allindexedfolders	=	"By all indexed folders"
category_down	=	"Down"
category_month	=	"Month"
category_music_album	=	"Album"
category_music_album_index	=	"Album (with index)"
category_music_albumartist	=	"Album Artist"
category_music_albumartist_index	=	"Album Artist (with index)"
category_music_artist	=	"Artist"
category_music_artist_index	=	"Artist (with index)"
category_music_composer	=	"Composer"
category_music_composer_index	=	"Composer (with index)"
category_music_genre	=	"Genre"
category_photo_timetaken	=	"Time taken"
category_type	=	"Attributes"
category_up	=	"Up"
category_year	=	"Year"
change_root_path	=	"Change"
class_allvideo	=	"All Videos"
class_artist_album	=	"Artist/Album"
class_composer_album	=	"Composer/Album"
class_genre_artist	=	"Genre/Artist"
class_genre_artist_album	=	"Genre/Artist/Album"
class_internet_radio	=	"Internet Radio"
class_letter_others	=	"Others"
class_music	=	"Music"
class_music_album	=	"By Album"
class_music_albumartist	=	"By Album Artist"
class_music_allmusic	=	"All music"
class_music_artist	=	"By Artist"
class_music_genre	=	"By Genre"
class_music_playlist	=	"Playlist"
class_music_userfile	=	"By Folder"
class_photo	=	"Photo"
class_photos	=	"Photo"
class_recent_added	=	"Recently added"
class_recent_taken	=	"Recently taken photos"
class_smart_playlist	=	"Smart Playlist"
class_taken_date	=	"By Date Taken"
class_video	=	"Video"
class_year_artist_album	=	"Year/Artist/Album"
class_yearmonday	=	"Year/Month/Day"
class_yearmonth	=	"Year/Month"
class_yearmonth_timetaken	=	"Year/Month (by time taken)"
codepage_mediaservice	=	"DMA codepage"
customize_device_behavior	=	"Change the settings of UPnP/DLNA devices within LAN."
debuglog_desc_mediaservice	=	"Enable this option to collect DMA communication logs for debugging purpose."
debuglog_label	=	"Log"
debuglog_mediaservice	=	"Enable DMA communication log for diagnostic purpose"
default_folder	=	"Default Folder"
default_profile	=	"Default Profile"
device	=	"Device"
ebdvideoinfo_mediaservice	=	"Show video's title using embedded information"
enable	=	"Enable"
enable_inetradio	=	"Enable Internet Radio"
error_devicelist_reset_failed	=	"Failed to reset the device list."
error_devicelist_save_failed	=	"Failed to save the device list."
error_duplicate_path	=	"Duplicated path. Please specify a different folder."
error_empty_path	=	"Please specify a folder."
error_empty_rule_name	=	"Please enter a name."
error_folder_not_exist	=	"The folder does not exist."
error_illegal_config_format	=	"The configuration files have been corrupted."
general_dlna	=	"Generic DLNA"
general_non_dlna	=	"Generic Non-DLNA"
general_upnp_dlna_device	=	"Generic UPnP/DLNA Device"
generic_setting	=	"General"
hide_subtitles	=	"Hide video subtitle files"
illegal_category_combination	=	"This combination is not allowed."
index_folder_create	=	"No indexed folders configured"
index_folder_edit	=	"Edit Indexed Folder"
index_folder_index_type	=	"File Type"
index_folder_title	=	"Indexed Folder"
language_mediaservice	=	"DMA menu language"
log_is_clear	=	"The log has been cleared."
mac_addr	=	"MAC address"
media_data_reindexing	=	"Indexing media files..."
menu_advance	=	"Advanced style"
menu_custom	=	"Custom 1"
menu_custom_2	=	"Custom 2"
menu_custom_3	=	"Custom 3"
menu_default	=	"DMA menu style"
menu_ipod	=	"iPod style"
menu_level	=	"Menu Structure"
menu_simple	=	"Simple style"
mimetype_list_alert_mediaservice	=	"Customized MIME types must be written in format such as "avi=video/avi" and must be separated by a comma."
mimetype_list_mediaservice	=	"Customized MIME types"
musicinfo_artistalbum	=	"Track - Title/Artist - Album"
musicinfo_mediaservice	=	"Music display format"
musicinfo_title	=	"Title only"
musicinfo_titlealbum	=	"Title/Album"
musicinfo_titleartist	=	"Title/Artist"
musicinfo_tracktitle	=	"Track - Title"
network_mediaservice	=	"Network interface"
no_media_pacakge	=	"No multimedia packages installed"
no_rule_desc	=	"You don’t have any menu styles here. The multimedia files will be organized by folders."
not_enough_space_to_upgrade	=	"Please make sure that {0} has at least {1} available space to complete the upgrade. After you free up enough space, please restart the system, or go to {2}Package Center{3} to run one of the following packages: Audio Station, Media Server, Synology Photos, or Video Station. If this issue persists, please contact Synology Support Team for assistance."
not_enough_space_to_upgrade_without_media_index_package	=	"Please make sure that {0} has at least {1} available space to complete the upgrade. After you free up enough space, please restart the system. If this issue persists, please contact Synology Support Team for assistance."
playlist_desc	=	"All playlists in the music shared folder will be displayed on the menu."
profile	=	"Profile"
recent_day	=	"Within (days)"
root_directory_path	=	"Select a folder"
root_directory_setting	=	"Folder Setting"
rule_categoryfolder	=	"By attributes"
rule_setting	=	"Time Frame"
rule_storagefolder	=	"By folder"
select_folder	=	"Select a folder"
select_one	=	"Please select at least one entry."
sendthumb_label	=	"Browsing Settings"
service_desc_mediaservice	=	"Enable DLNA/UPnP support to browse multimedia files with a DLNA/UPnP DMA."
service_desc_mediaservice_buffersize	=	"Choosing a larger buffer size may improve video playing quality.  The media server will be restarted after the setting is modified."
service_desc_mediaservice_cmzmimetype	=	"Enter customized MIME types to help DMA identify file formats. Customized MIME types will overwrite the default settings."
service_desc_mediaservice_sendthumb	=	"Enable this function to quickly browse images."
service_desc_mediaservicecodepage	=	"The codepage setting should be identical with that on the DMA. Only under appropriate codepage setting, users can see correct file names on the DMA."
service_desc_mediaservicelanguage	=	""
service_mediaservice	=	"Enable DLNA/UPnP media server"
service_mediaservice_buffersize	=	"Streaming Buffer Size (KBytes)"
service_mediaservice_cmzalbumart	=	"Set images with the below filenames as music/video cover"
service_mediaservice_cmzmimetype	=	"Enable customized MIME types"
service_mediaservice_sendthumb	=	"Transmit low resolution images instead of the original images"
showall_album	=	"All Albums"
showall_albumartist	=	"All album artists"
showall_artist	=	"All Artists"
showall_composer	=	"All Composers"
showall_genre	=	"All Genres"
showall_month	=	"All Months"
showall_music_items	=	"All Songs"
showall_photo_items	=	"All Photos"
showall_takendate	=	"All Taken Dates"
showall_video_items	=	"All Videos"
showall_year	=	"All Years"
showall_yearmon	=	"All Year/Month"
showall_yearmonday	=	"All Dates"
smart_playlist_desc	=	"All smart playlists created in the iTunes page will be displayed on the menu."
storagefolder_desc	=	"All media in shared folders will be displayed on the menu."
tip_delete_rule	=	"Delete a custom style"
tip_edit_rule	=	"Edit a custom style"
tip_new_rule	=	"Create a custom style"
transcoder_label	=	"DMA Compatibility"
type	=	"Type"
unknown_music_album	=	"Unknown Album"
unknown_music_albumartist	=	"Unknown album artist"
unknown_music_artist	=	"Unknown Artist"
unknown_music_composer	=	"Unknown Composer"
unknown_music_genre	=	"Unknown Genre"
unknown_music_year	=	"Unknown Year"
unknown_takendate	=	"Unknown Taken Date"

[memory_layout]
desc_for_monaco	=	"You can select 4K conversion to allow support for more video formats compatible with your media player, or select 1080p conversion to consume less system memory."
desc_for_rtd1296	=	"You can enable video conversion to allow converting videos to different formats which are compatible with your media player, or disable this function to consume less system memory."
enable_video_transcoding	=	"Enable video conversion"
memory_detect_incompatible	=	"Memory configuration that is not compatible with this model is detected. We recommend that you refer to the specifications in the hardware installation guide or on the official website to correct the following memory configuration."
memory_detect_unauthentic	=	"Detected non-Synology recommended memory module configurations. Please select <a class="link-font" target="_blank" href="https://www.synology.com/products/accessories/ram_railkit">authentic Synology memory modules</a> for better system reliability. You may have<br>%ILLEGAL_LAYOUT%"
memory_ecc_not_same	=	"Mixed ECC memory module with non-ECC memory module"
memory_layout	=	"Memory Layout"
memory_layout_1way	=	"Allow single 1080p conversion"
memory_layout_4k	=	"Allow single 4K conversion"
memory_layout_confirm	=	"A reboot is required for Memory Layout settings to take effect. Would you like to reboot now?"
memory_layout_note	=	"Enabling 4K conversion requires the allocation of a dedicated block of memory on your _DISKSTATION_."
memory_not_compatible	=	"Inserted non-Synology memory modules"
memory_size_not_same	=	"Mixed memory modules with different size"
video_transcoding	=	"Video Conversion"
video_transcoding_confirm	=	"You must restart your _DISKSTATION_ to apply changes. Are you sure you want to restart now?"

[metadata]
file_transfer_log	=	"File transfer log"
metadata_autoselect	=	"Automatic configuration"
metadata_clean_offline	=	"Refresh Database"
metadata_desc	=	"Move the current database to the selected shared folder:"
metadata_enabled	=	"Enable system database"
metadata_err_enable	=	"Unable to enable system database. Please try again later."
metadata_err_space	=	"To enable the system database, you need {0} MB of free space."
metadata_indexed_btn	=	"Multimedia Source"
metadata_indexed_title	=	"Multimedia Source"
metadata_load_from_share	=	"Choose one of the existing databases:"
metadata_located_in	=	"Current location: {0}"
metadata_masking	=	"Indexing system database..."
metadata_overwrite_warning	=	"The content of your destination shared folder will be replaced. Are you sure you want to proceed?"
metadata_select_one_share	=	"Select a shared folder"
metadata_title	=	"System Database"
metadata_warning_disabled	=	"When you disable System Database, the following services will also be disabled:"
metadata_warning_noindexed	=	"No multimedia sources. Please go to <b>Multimedia Database</b> > <b>Multimedia Source</b> to select folders."
metadata_warning_required	=	"You need to enable <b>System Database</b> before activating this service. Do you want to go to its setup page now?"

[migration_assistant]
feasibility_bond_create	=	"Bond cannot be created while Migration Assistant is syncing."
feasibility_bond_delete	=	"Bond cannot be deleted while Migration Assistant is syncing."
feasibility_disk_deactivate	=	"Drives cannot be deactivated while Migration Assistant is syncing."
feasibility_ovs_create	=	"Open vSwitch cannot be enabled while Migration Assistant is syncing."
feasibility_ovs_delete	=	"Open vSwitch cannot be disabled while Migration Assistant is syncing."
feasibility_pool_delete	=	"Pools cannot be removed while Migration Assistant is syncing."
feasibility_poweroff	=	"Your _DISKSTATION_ cannot be shut down while Migration Assistant is syncing."
feasibility_share_transform	=	"You cannot change the shared folder type while Migration Assistant is syncing."
feasibility_volume_create	=	"Volumes cannot be created while Migration Assistant is syncing."
feasibility_volume_delete	=	"Volumes cannot be removed while Migration Assistant is syncing."
feasibility_volume_expand	=	"Volumes cannot be expanded while Migration Assistant is syncing."
feasibility_volume_offline	=	"File system check cannot be performed while Migration Assistant is syncing."

[mobile]
change_passwd_warning	=	"Please sign in to DSM in desktop mode to reset your password."
common_back	=	"Back"
common_empty_list	=	"List is empty."
common_error_empty_name	=	"Name cannot be empty."
dsm_help_title	=	"DSM mobile"
dsm_mobile_forbid_non_admin	=	"DSM Mobile is available for administrators only. Please click OK to switch to the _OSNAME_ desktop."
error_otpwizard	=	"Please switch to desktop mode to launch OTP wizard."
error_pkg_install	=	"Unable to install the package. Please use DSM in desktop mode and try again."
error_sso_login	=	"Failed to sign in to SSO."
file_transfer_log	=	"File Transfer Logs"
firmware_os_upgrade	=	"_OSNAME_ Upgrade"
firmware_restart_dsm	=	"Restarting your DiskStation"
firmware_updating_dsm	=	"Upgrading DSM on your DiskStation.</br>It will take about 10 minutes. Please wait..."
ipblock_allow_until	=	"Allow until"
ipblock_block_until	=	"Block until"
ipblock_confirm_delete	=	"Are you sure your want to delete the IP [{0}]?"
log_event_log	=	"Event logs"
log_lasted_log	=	"Latest {0} logs"
log_overview	=	"Overview"
menu_application	=	"Mobile Apps"
menu_desktop_edition	=	"Desktop Mode"
menu_findme	=	"Find me"
menu_findme_stop	=	"Stop delivering [Find me] signals"
menu_firmware	=	"Firmware"
menu_group	=	"Group"
menu_ha_sb_warning	=	"Please sign in to DSM in desktop mode to fix the split-brain error of the high-availability cluster."
menu_ip_block	=	"IP Blocking"
menu_log	=	"Log"
menu_logout	=	"Sign Out"
menu_package_center	=	"Package Center"
menu_reboot	=	"Reboot"
menu_reboot_confirm	=	"Are you sure you want to reboot?"
menu_rebooting	=	"Rebooting the system..."
menu_resource_monitor	=	"Resource Monitor"
menu_rwd_edition	=	"Mobile View"
menu_service	=	"Services"
menu_settings	=	"Settings"
menu_shared_folder	=	"Shared Folders"
menu_shutdown	=	"Shut Down"
menu_shutdown_confirm	=	"Are you sure you want to shut down?"
menu_shutting_down	=	"Shutting down the system..."
menu_storage_manager	=	"Storage Manager"
menu_system_info	=	"System Info"
menu_user	=	"User"
menu_user_group	=	"User & Group"
setting_about	=	"About"
setting_account	=	"Account"
setting_diskstation	=	"DiskStation"
setting_document	=	"Documents"
setting_faq	=	"FAQ"
setting_feedback	=	"Feedback"
setting_help	=	"Help"
setting_logininfo	=	"Login Information"
setting_support	=	"Contact support"
setting_whatsnew	=	"What's New"
share_group_name	=	"Group Name"
share_option	=	"Option"
share_override_by_group	=	"Selected permission has lower priority than group permission, and will thus follow group permission."
share_share_name	=	"Shared Folder Name"
share_user_name	=	"User Name"
sharefolder_empty_recyclebin_succ	=	"Successfully emptied the recycle bin."
sharefolder_group_permission	=	"Group permissions"
sharefolder_user_permission	=	"User Permissions"
update_setting_option_type_auto_install	=	"Automatically install the latest update"
update_setting_option_type_auto_install_security	=	"Automatically install important updates"
update_setting_option_type_latest	=	"Automatically install the latest updates"
update_setting_option_type_notify_me	=	"Notify me when available"
update_setting_option_type_security_only	=	"Automatically install important updates"
updater_precheck_fail_desc	=	"Important system update information available. Please use DSM in desktop mode to check the information."
usergroup_status_disable	=	"Disable"
usergroup_status_enable	=	"Enable"

[mount]
adv_opt	=	"Advanced options"
everyone	=	"All users"

[msg]
err_prefix_not_match	=	"The chosen prefix is no longer valid, please choose a valid prefix."
info_firewall_portforward	=	"Please check the port forwarding and firewall settings for your network environment to make sure the _PRTL_ port _PORT_ is open."
warn_select_conn	=	"Please select one connection."

[myds]
abandon_service_desc	=	"If you abandon this service or package, it will be unavailable on this _DISKSTATION_."
account	=	"Account"
account_info_desc	=	"You can update your personal Synology Account information here."
account_information	=	"Account Information"
activate_mail_desc	=	"You will receive an activation message at the following email address. Please activate your account in the next 72 hours to continue the services.<br>Email: {0}"
active_insight_desc	=	"{0}Synology Active Insight{1} is a 24/7 monitoring service that allows you to get an overview of Synology NAS operating status through a web portal and will notify you of system abnormalities. Each notification comes with detailed steps for troubleshooting."
active_insight_disable_confirm	=	"If you do not enable Synology Active Insight again for this _DISKSTATION_ within 30 days, all the information regarding this _DISKSTATION_ will not be accessible anymore from the Active Insight web portal."
active_insight_disable_title	=	"Disable Synology Active Insight?"
active_insight_enabled	=	"Enabled"
active_insight_enabling	=	"Enabling"
active_insight_login_sa_error	=	"To enable Active Insight, please sign in to your Synology Account at the Control Panel."
active_insight_mode_switch_failed	=	"Metrics collection setting failed."
active_insight_mode_updating	=	"Applying metrics collection setting"
active_insight_need_ntp_desc	=	"When you enable the Active Insight service, the {0}Time Setting{1} will automatically change to "Synchronize with NTP server"."
active_insight_network_error	=	"Service abnormal. Please check the Internet connectivity."
active_insight_pkg_desc	=	"Synology Active Insight is a 24/7 monitoring service that allows you to get an overview of Synology NAS operating status through a web portal and will notify you of system abnormalities. Each notification comes with detailed steps for troubleshooting."
active_insight_reached_host_limit_error	=	"Maximum host number exceeded"
active_insight_reached_register_limit	=	"Exceeded the maximum number of hosts where you can enable the Active Insight service under this Synology Account."
active_insight_registering	=	"Registering"
active_insight_server_maintenance_error	=	"Under maintenance"
active_insight_status	=	"Service status"
active_insight_synology_account_logout_notice	=	"Signing out of your Synology Account will disable the Active Insight service on your _DISKSTATION_. If the Active Insight service is not enabled again within 30 days, you cannot access all the previous information about this _DISKSTATION_ anymore from the Active Insight web portal."
active_insight_upload_fail	=	"Service abnormal. Data upload failed."
active_insight_version_outdated_error	=	"Package outdated (Please update Active Insight at Package Center)"
already_have_account	=	"I already have a Synology Account"
already_logged_in	=	"Already logged in as "{0}""
buyer_id	=	"Buyer ID"
cannot_change_to_manual_if_ai_enable	=	"Synology Active Insight"
change_account	=	"Change Account"
change_email_desc	=	"For any change in the email account, you will receive a confirmation message to verify the change."
critical_release_desc	=	"Important updates for _OSNAME_"
enable_active_insight	=	"Enable Active Insight"
enews_desc	=	"New product & feature releases"
enews_local_promotion_desc	=	"First-hand information on local promotional events"
error_migrate_authen	=	"An error has occurred when you try to log in. The migration wizard will be terminated. To enable the service, please log in at Synology Account manually or contact {0}Synology Support{1} for technical assistance."
error_migrate_target_unactivated	=	"The selected Synology Account has not been activated. Please choose another account."
error_query_info	=	"Cannot query Synology Account info"
error_unactivated	=	"Your Synology Account has not been activated. To use the associated services, please click the activation link at the registered email address."
fail_to_sync_ntp_server	=	"Unable to enable Synology Active Insight service. Please make sure you have enabled NTP service at Regional Options > NTP Service. If the issue persists, please select a different NTP server and try again."
force_login_many_account	=	"More than one Synology Account is found in your _DISKSTATION_. Select a main account with the Synology Account migration wizard. If you skip this step, all the services unassociated with this login account will be abandoned. Are you sure you want to continue?"
force_login_one_account	=	"A service is found associated with the Synology Account: {0}. If you sign in to another account, this service will be abandoned. Are you sure you want to continue?"
in	=	"in"
invalid_machine	=	"Error Code: 3015. Please contact Synology Support for technical assistance."
item	=	"Item"
latest_version	=	"Latest version"
login_desc	=	"Sign in to Your Synology Account"
login_for_active_insight	=	"To enable Synology Active Insight, please sign in to your Synology Account or sign up for one."
login_or_register_myds_account	=	"Sign in to or sign up for a Synology Account"
login_please	=	"Please sign in to your Synology Account to enjoy the services."
logout_alert	=	"Failed to log out of the Synology Account due to the following reasons:"
logout_confirm	=	"The following service will be stopped once you sign out of Synology Account. Are you sure you want to sign out?"
logout_confirm_multiple	=	"The following services will be stopped once you sign out of Synology Account. Are you sure you want to sign out?"
logout_confirm_title	=	"Sign out of Synology Account?"
manage_account	=	"Manage Account"
migrate_abandon_service	=	"I do not want to use the service(s) above"
migrate_choose_target_desc	=	"To offer streamlined services, we have consolidated DDNS, QuickConnect, package purchase, and Synology central server management to the Synology Account."
migrate_choose_target_introduction	=	"Please select a main account and all our services will be tied to it."
migrate_choose_target_title	=	"Welcome to Synology Account Migration Wizard"
migrate_confirm	=	"The following selected services will be migrated to the Synology Account {0}. Do you want to continue?"
migrate_migrate_account_desc	=	"At this step, we will guide you through consolidating all the selected services related to the Synology Account."
migrate_migrate_account_title	=	"Enjoy the Existing Service"
migrate_migrate_service	=	"I want to use the following service(s) and agree to migrate them to {0}"
migrate_skip_confirm	=	"If you ignore this wizard, the following services will be unavailable on this _DISKSTATION_. You will need to manually enable and register each service at Control Panel for use. Do you want to continue?"
migrate_summary_desc	=	"You have successfully migrated the services to the following Synology Account."
migrate_summary_title	=	"Migration is completed."
model_and_serial	=	"Model & S/N"
myds_account	=	"Synology Account"
myds_center	=	"Synology Account"
myds_desc	=	"After you sign in to Synology Account, you can set up QuickConnect, DDNS services, and configuration automatic backup for your _DISKSTATION_. In your {0}Synology Account{1}, you can also manage your registered products/software licenses, contact Synology Technical Support, and subscribe to eNews."
myds_service	=	"Synology Account Service"
need_account_question	=	"Need a Synology Account?"
new_password_placeholder	=	"Type to change password"
not_activated_alert	=	"Please check your inbox and activate your Synology Account so that the associated services from Synology will not be suspended."
not_activated_desc	=	"Your Synology Account is not activated and associated services may be suspended anytime without notification. Please go to the registered email address for activation."
notify_ds_migrated	=	"You have signed out of the Synology Account. The DDNS and QuickConnect services will soon be suspended. Please click {0}login{1} to continue the services."
notify_skip_autologin	=	"An error has occurred upon the login to the Synology Account. The login process will be terminated. To enable the service, please sign in to {0}Synology Account{1} manually or contact {2}Support Center{3} for technical assistance.<br>{4}Don't show this again{5}"
notify_skip_migration	=	"The Synology Account migration wizard has failed to complete. Please consolidate your accounts to enjoy the associated Synology Account services. Click {0}here{1} to enter Synology Account.<br>{2}Don't show this again{3}"
password_current	=	"Current password"
password_forget	=	"Forgot your password?"
password_myds	=	"Synology Account password"
password_new	=	"New password"
password_new_confirm	=	"Confirm new password"
please_activate	=	"Please activate your Synology Account to view this page."
purchase_history	=	"Purchase History"
purchase_history_introduction	=	"You can browse all the package purchases here. To find the packages available to your _DISKSTATION_, please visit {0}Package Center{1}."
purchased_item	=	"Purchased item"
quickconnect_no_service	=	"With your QuickConnect ID, you can enable and enjoy various services from Synology."
quickconnect_setup_service	=	"Enable the services using QuickConnect"
register_critical_release	=	"I want to receive the important updates for _OSNAME_"
register_desc	=	"You need a Synology Account to use the associated services such as DDNS, QuickConnect, and package purchase."
register_success	=	"Registration successful"
register_tos	=	"I have read and agree to the {0}Privacy Policy{1}"
search	=	"Search"
search_by_date	=	"Search by date"
search_by_keyword	=	"Search by keyword"
service	=	"Service"
service_ddns_hostname	=	"DDNS hostname"
service_ddns_introduction	=	"The Synology DDNS service offers you easy access to your _DISKSTATION_ without the need for a complex IP address or a dynamic IP. At Synology Account, you can monitor its connection status. You can choose to be notified via email, mobile text messages, or browser notifications when the connection is down or resumed."
service_ddns_setup	=	"Set up a Synology DDNS Hostname"
service_quickconnect_create	=	"Create your QuickConnect ID"
service_quickconnect_enabled_services	=	"QuickConnect is enabled for the following services"
service_quickconnect_introduction	=	"QuickConnect frees you from worries about port forwarding or any other complex router setup. Via QuickConnect, you can connect to your _DISKSTATION_ from anywhere. Register for a QuickConnect ID and enjoy the easy connection that follows."
sign_up	=	"Sign Up"
subscription	=	"eNews"
subscription_settings	=	"eNews Settings"
subscription_settings_intro	=	"Choose which category of eNews you would like to receive from Synology."
to	=	"to"
transaction_id	=	"Transaction ID"

[netbackup]
amazon_s3	=	"Amazon S3"
amazon_s3_encrypted	=	"Amazon S3(encrypted)"
backup_destination_encryption_only	=	"The backup destination supports encrypted transfer only."
backup_destination_no_encryption_only	=	"The backup destination supports non-encrypted transfer only."
backup_surveillance_warn	=	"The backup source selected includes the 'surveillance' shared folder. This shared folder cannot be restored when backup task is finished."
bkp_host_no_dir	=	"No backup data found on the server you have specified."
bkp_host_share_no_dir	=	"No backup data were found in the specified shared folder."
ckb_cusmtom_rsync_conf	=	"Use customized rsync configuration"
compression_enable	=	"Enable transfer compression"
confirm_disconnectuser	=	"The system is currently being accessed by other users. Continuing this will disconnect them. Are you sure you want to continue?"
conflict_share	=	"Conflicted Shared Folders"
conflict_share_msg	=	"The conflicted shared folders are marked in red."
desc_cusmtom_rsync_conf	=	"Enabling this option will disable "Shared Folder Sync", "Time Backup", and "LUN Backup" services. Refer to Help for more information."
dest_share_desc	=	"Select a shared folder as the backup destination"
dest_share_folder	=	"Destination shared folder"
dest_share_title	=	"Select the destination shared folder"
encryption_enable	=	"Enable SSH transfer encryption"
err_create_service_share	=	"Failed to enable the rsync backup service due to insufficient storage space. Please check your volume status and try again."
err_ip_denied	=	"Maximum retries reached. Please contact the destination administrator for assistance."
err_no_share	=	"There is no share folder available."
err_no_volume	=	"No volumes available."
err_privilege_not_granted	=	"You can't access Network Backup service. Please contact the administrator for privilege."
err_quota_exceeded	=	"The user's space quota on the destination server is exceeded."
err_share_perm_denied	=	"You are not authorized to access the folder. Please contact administrators."
error_rmno_sh	=	"You did not select any Network Backup setting to remove."
error_slct_one	=	"Please select one backup set"
local_share_list	=	"Shared folders on {0}:"
netbackup_online_rsync	=	"On-line (rsync)"
netbackup_online_ssh	=	"On-line (SSH)"
netbkp_account	=	"Username"
netbkp_account_pass_fail	=	"Invalid username or password. If you want to authenticate using the credentials of domain or LDAP users, provide the complete username (such as "domain\user" or "user@directory") and try again."
netbkp_addto	=	"Back up"
netbkp_all_set	=	"No available shared folders for setup, or all shared folders have been added to Network Backup tasks."
netbkp_auth_user	=	"Network backup user"
netbkp_backup_desc	=	"Select the server type and choose a server by selecting from the drop-down menu or entering manually)."
netbkp_backuping	=	"Backing up..."
netbkp_bad_module	=	"Module cannot contain special characters : / \ # [ ] < > ""
netbkp_bkp_share	=	"Shared folder"
netbkp_bkp_status	=	"Backup status"
netbkp_bkp_time	=	"Backup time:"
netbkp_cancel	=	"Cancel"
netbkp_cfrmrm	=	"Are you sure you want to delete the settings?"
netbkp_connect	=	"Connected"
netbkp_connection_testing	=	"Testing Connection, please wait"
netbkp_connection_testing_fail	=	"Testing connection failed"
netbkp_connection_testing_success	=	"Testing connection succeeded"
netbkp_data_compression	=	"Data compression"
netbkp_dest	=	"Back up to"
netbkp_details	=	"Get Info"
netbkp_disconnect	=	"Disconnected"
netbkp_disconnect_msg	=	"The server may have been disconnected."
netbkp_e_cmd_notfound	=	"Remote command not found."
netbkp_e_cmd_run	=	"Failed to run remote command."
netbkp_e_del_limit	=	"System has reached its limit of the number of files that can be deleted once for synchronizing data. Please refer to logs for details."
netbkp_e_disconnect	=	"Failed to connect to the destination server. Please make sure: <BR>1. The server name or IP address is correct.<BR>2. Network Backup service has been enabled on the destination server at Backup & Replication > Backup Services.<BR>3. The destination server is connected to an active network."
netbkp_e_disconnect_html	=	"Failed to connect to the destination server. Please make sure: <BR>1. The server name or IP address is correct.<BR>2. Network Backup service has been enabled on the destination server.<BR><BLOCKQUOTE><font class='red-status'>Backup & Replication > Backup Services</font></BLOCKQUOTE><BR>3. The destination server is connected to an active network."
netbkp_e_diskfull	=	"The used space has reached the limit on the target server."
netbkp_e_malloc	=	"Insufficient memory."
netbkp_e_name2long	=	"Network Backup skipped some files with too long file name."
netbkp_e_network_unstable	=	"Failed to connect to the destination server. Please check the following and try again:<ol><li>The destination server is connected to an active network.</li><li>The network backup port forwarding rules have been configured on the destination server.</li></ol>"
netbkp_e_no_service2	=	"The target server does not support backup encryption or the encryption connection service is initializing. Please wait a moment."
netbkp_e_nonexistent_folder	=	"The specified backup module does not exist. Please check the module path and try again."
netbkp_e_pass	=	"Invalid username or password."
netbkp_e_rsync_bad_module	=	"Invalid backup module name."
netbkp_e_rsync_bad_option	=	"Rsync version of the target server is incompatible. Please upgrade the protocol version of rsync to compatible version."
netbkp_e_ssh_disconnected	=	"Failed to establish the SSH connection. Please check your username and password, make sure the SSH service of the destination server is normal, and then try again."
netbkp_e_streamio	=	"Error occurred while transferring data."
netbkp_e_unknown	=	"Unknown error."
netbkp_e_unsupported	=	"Requested action is not supported."
netbkp_empty_module	=	"Please enter a backup module name."
netbkp_enable	=	"Enable network backup service"
netbkp_enable_ssh	=	"Enable backup encryption"
netbkp_enable_ssh_port	=	"Customize SSH encryption port"
netbkp_err_cancel	=	"Failed to cancel."
netbkp_err_host_str	=	"Invalid IP address or server name."
netbkp_err_no_server	=	"Failed to find the corresponding server."
netbkp_err_oldpass	=	"Cannot retrieve the password."
netbkp_err_servertype	=	"Invalid server type."
netbkp_high_security	=	"Encrypted"
netbkp_hostname	=	"(Recommend: enter the hostname if the server IP is set as DHCP.)"
netbkp_immediate	=	"Back up now"
netbkp_input	=	"Input..."
netbkp_input_addr	=	"Enter the server IP"
netbkp_instruct1	=	"Backup tasks"
netbkp_last_bkptime	=	"Last backup time"
netbkp_low_security	=	"Not encrypted"
netbkp_main_instruct2	=	"You can restore the user, group, and shared folder settings, or data in shared folders from another _DISKSTATION_ or rsync compatible server."
netbkp_main_subject	=	"Network Backup"
netbkp_module	=	"Backup module"
netbkp_multi_slct	=	"(Multi-selection allowed)"
netbkp_network_disconnect	=	"Failed to connect to the destination server. Please check the following and try again:<ol><li>The server name or IP address is correct.</li><li>rsync service has been enabled on the destination server at Control Panel > File Services > rsync.</li><li>Application privilege for rsync has been enabled on the destination server at Control Panel > Application > Privileges.</li></ol>"
netbkp_network_ssh	=	"Failed to establish SSH connection to the destination server. Please check the following and try again:<ol><li>The server name or IP address is correct.</li><li>Network Backup service has been enabled on the destination server at Backup & Replication > Backup Services.</li><li>The destination server is connected to a stable network.</li><li>Backup client and server is busy.</li></ol>"
netbkp_network_timeout	=	"Connection timeout. Please try again after you make sure:<ol><li>The destination server has proper network connection.</li><li>Your _DISKSTATION_ and the destination server are not busy.</li></ol>"
netbkp_new_final_title	=	"Task created"
netbkp_new_schedule_title	=	"Set up Backup Schedule"
netbkp_new_select_title	=	"Select shared folders"
netbkp_new_summary_title	=	"Confirm settings"
netbkp_new_welcome	=	"The wizard will help you do the following:<p><ul><li>Select the shared folders you want to back up.</li><li>Select a destination server.</li><li>Set the backup schedule."
netbkp_new_welcome_title	=	"Welcome to the Network Backup Wizard"
netbkp_no_exec	=	"Not executed."
netbkp_no_folder	=	"This server contains no backup data."
netbkp_no_restore	=	"No"
netbkp_no_schedule	=	"No schedule"
netbkp_not_bkp	=	"No backup yet"
netbkp_overwrite_data	=	"Overwrite conflicted shared folders"
netbkp_rcvr_config	=	"Restore user, group, and shared folder settings."
netbkp_rcvr_folder	=	"Folder"
netbkp_rcvr_server	=	"Select the source server to recover data from:"
netbkp_rcvr_wizard	=	"Network Recovery Wizard"
netbkp_recovery	=	"Restore"
netbkp_restore	=	"Yes"
netbkp_restore_conf	=	"Restore user, group, and shared folder settings"
netbkp_restore_conflict_share	=	"Conflicted shared folders"
netbkp_restore_directory_desc	=	"Select the directory where the data is kept"
netbkp_restore_directory_title	=	"Select the source directory to restore data"
netbkp_restore_enhance	=	"and overwrite the conflicted settings."
netbkp_restore_final_title	=	"Restoring backups"
netbkp_restore_finish	=	"System is restoring backups now."
netbkp_restore_folder	=	"Source folder"
netbkp_restore_folder_title	=	"Select the source folder to restore data"
netbkp_restore_share_desc	=	"Select a shared folder as the source from which to restore your data"
netbkp_restore_share_title	=	"Select a restore method"
netbkp_restore_skip	=	"and skip the conflicted shared folders"
netbkp_restore_summary_title	=	"Confirm settings"
netbkp_restore_welcome	=	"The wizard will help you do the following: <p><ul><li>Select the source server where backups exist.</li><li>Select the shared folder for restoring backups.</li><li>Choose to restore user and shared folder settings.</li></ul></p>"
netbkp_restore_welcome_title	=	"Welcome to the Backup Restoration Wizard"
netbkp_rsync_permission_warn	=	"<font class="red-status">Warning! </font>You are now performing encrypted backup using an account with lower access privileges. It is recommended that you log in as admin or perform non-encrypted backup to avoid backup failure.<br>Are you sure you want to continue?"
netbkp_s3_main_subject	=	"Amazon S3 Backup Destination"
netbkp_s3_select_bucket	=	"Select Bucket"
netbkp_s3_server_desc	=	"Enter Amazon S3 login information"
netbkp_schedule	=	"Backup schedule"
netbkp_search_folder	=	"Searching for the shared folder. Please wait..."
netbkp_security	=	"Security"
netbkp_select	=	"Server:"
netbkp_select_msg	=	"Specify a server."
netbkp_select_share_desc	=	"Select the shared folders you want to back up:"
netbkp_selected_server	=	"Selected server"
netbkp_server	=	"Destination server"
netbkp_server_type_title	=	"Select the server type"
netbkp_serverset1_desc	=	"Select the destination server from the drop-down menu or enter the server IP manually, and then enter the account info."
netbkp_serverset2_desc	=	"Enter the destination server IP, and the account info."
netbkp_serverset3_desc	=	"Select the source server from the drop-down menu or enter the server IP manually, and then enter the account info."
netbkp_serverset4_desc	=	"Enter the source server IP, and the account info."
netbkp_serverset_title	=	"Set the backup destination"
netbkp_servertype_desc	=	"Select the type of the destination server:"
netbkp_service_no_run	=	"Network backup service is disabled on the destination server at Backup & Replication > Backup Services."
netbkp_set_ip	=	"Server name or IP address"
netbkp_set_pass	=	"Administrator's password on target server"
netbkp_set_pass2	=	"Administrator's password on source server"
netbkp_set_schedule	=	"Enable backup schedule"
netbkp_setup_finish	=	"The network backup task has been created. To perform backup immediately, tick the "Back up now" checkbox and click Finish."
netbkp_skip_overwrite	=	"Skip conflicted shared folders"
netbkp_slct_server	=	"Server type"
netbkp_source	=	"Source"
netbkp_specific_char_warn	=	"Module name cannot contain specific characters < >."
netbkp_ssh_port_info	=	"This option allows you to specify the transfer encryption port from backup data to remote shared folders."
netbkp_ssh_port_info_restore	=	"This option allows you to specify the transfer encryption port from remote shared folders for data restoration."
netbkp_sshd_port	=	"SSH encryption port"
netbkp_st_init	=	"Initializing..."
netbkp_status	=	"Status"
netbkp_status_fail	=	"Failed. Please refer to logs for details."
netbkp_status_ok	=	"Successful"
netbkp_subject	=	"Network Backup"
netbkp_subject_edit	=	"Network Backup - Edit"
netbkp_subject_new	=	"Network Backup - Create"
netbkp_sync_self	=	"You can only choose non-local server."
netbkp_target	=	"Target"
netbkp_test_connection	=	"Test connection"
netbkp_view_config	=	"View the system configurations"
netbkp_view_share	=	"View the conflicted shared folders"
netbkp_wait_server	=	"Searching for servers. Please wait..."
netbkp_wait_sync	=	"Waiting..."
netbkp_wizard_step	=	"Step"
recover_confirm_msg1	=	"The user, group, and shared folder settings will be overwritten by the previous settings. Are you sure you want to continue?"
recover_confirm_msg2	=	"Data in the shared folders will be overwritten by the previous data. Are you sure you want to continue?"
recover_confirm_msg3	=	"The users, groups, shared folders, and shared folder data will be overwritten by the previous backup file. Are you sure you want to continue?"
recover_err_share	=	"Cannot find the destination shared folders"
recover_footer_desc	=	"Progress of network restoration:"
recover_last_time	=	"Restored time:"
recover_progress_conf	=	"Recovering settings..."
recover_progress_share	=	"Recovering data..."
recover_s3_footer_desc	=	"S3 Backup restoration progress:"
recover_serverset_title	=	"Select the source server"
recover_servertype_desc	=	"Select the type of the source server:"
recover_summary_desc	=	"The wizard will restore backups accordingly. The process time will depend on the data size. Click Next to continue."
recover_timer_progress	=	"Progress:"
recover_timer_share	=	"Shared folders:"
recover_timer_wait	=	"Performing Network Recovery. Please wait..."
recover_warn	=	"Performing network restoration will also stop all backup tasks. Are you sure you want to continue?"
restore_server	=	"Source server"
restore_share_folder	=	"Source shared folder"
rsync_compatible_server	=	"rsync-compatible server"
rsync_get_module_mask	=	"Getting Module Names"
s3_access_key_err	=	"Connection test failed. Please check your authentication information."
s3_bucket_empty_text	=	"Select or Create a Bucket"
s3_bucket_existed	=	"This name has already been used or reserved. Please use another name."
s3_bucket_length_limitation	=	"The length of Bucket name must be between 3 and 255 characters. "
s3_bucket_name_invalid	=	"This bucket name is invalid. <BR>A valid bucket name should follow the following rules, depending on the region you selected: <BR>If you have selected US Standard:<BR>1. Can contain uppercase letters, lowercase letters, numbers, periods (.), underscores (_), and dashes (-).<BR>2. Must be between 3 and 255 characters in length.<BR>3. Must not be in the form of an IP address (e.g., 192.168.5.4).<BR>If you have selected non-US Standard regions:<BR>1. Can contain lowercase letters, numbers, periods (.) and dashes (-).<BR>2. Must start and end with a number or a lowercase letter.<BR>3. Must be between 3 and 63 characters in length.<BR>4. Must not be in the form of an IP address (e.g., 192.168.5.4).<BR>5. Must not contain dashes (-) immediately before or after periods (.)."
s3_bucket_name_invalid_short	=	"This bucket name is invalid."
s3_bucket_name_ip_limit	=	"Must not be in the form of an IP address (e.g., 192.168.5.4)."
s3_bucket_name_leading_letter_limit	=	"Must start and end with a number or a lowercase letter."
s3_bucket_name_length_limit	=	"Must be between {0} and {1} characters in length."
s3_bucket_name_meet_condition	=	"A valid bucket name should follow the following rules"
s3_bucket_name_non_us_standard_letter_limit	=	"Can contain lowercase letters, numbers, periods (.) and dashes (-)."
s3_bucket_name_period_limit	=	"No hyphen (-) or period (.) allowed immediately before or after a period (.)."
s3_bucket_name_us_standard_letter_limit	=	"Can contain uppercase letters, lowercase letters, numbers, periods (.), underscores (_), and dashes (-)."
s3_bucket_not_exist	=	"The destination does not exist."
s3_bucket_retrieve_err	=	"Failed to retrieve Buckets. Please confirm your Access Key and Secret Key."
s3_name_look_up_err	=	"Unable to connect to the remote server. Please check your network settings."
s3_retrieve_bucket	=	"Retrieving Buckets"
s3_secret_key_err	=	"Test connection failed. Please confirm your authentication information."
s3_server	=	"Amazon S3 Server"
s3_target_bucket	=	"Target Bucket"
s3_time_skewed_err	=	"The time on your _DISKSTATION_ and the remote server do not match. Please go to Control Panel > Regional Options > Time to synchronize time with the NTP server."
service_set_httpport	=	"Enter the port number:"
synology_server	=	"{0} server"

[network]
add_reservation	=	"Add to address reservation"
all_cluster_service_restart_warning	=	"Network services in cluster will restart when these settings are applied."
apple_atalk_enable	=	"Enable AppleTalk"
apple_default	=	"default"
apple_enable	=	"Enable AFP service"
apple_no_zone	=	"No zones are available"
apple_quick_disconnect	=	"Release resources immediately after disconnect"
apple_restart	=	"AppleTalk service is restarting, please wait a moment."
apple_set_err	=	"Error occurred while changing the network configuration. Please try again later."
apple_subject	=	"AFP"
apple_zone	=	"AppleTalk Zone"
arp_ignore	=	"Reply to ARP requests if the target IP address is a local address configured on the incoming interface"
auth_8021x	=	"802.1X"
auth_anonymous	=	"Anonymous identity"
auth_ca_cert	=	"CA certificate"
auth_eap	=	"Authentication"
auth_enable	=	"Enable 802.1X authentication"
auth_import_file	=	"Import file"
auth_import_notify	=	"Imported on {0}"
auth_not_import_nofity	=	"No file imported."
auth_note	=	"You can select authentication settings here before connecting your _DISKSTATION_ to the protected network. When your _DISKSTATION_ connects to a network protected by 802.1X, these settings will be used to authenticate."
auth_pac	=	"PAC file"
auth_phase2	=	"Inner authentication"
auth_private_key	=	"Private key"
auth_private_key_passwd	=	"Privte key password"
auth_processing	=	"Authenticating..."
auth_user_cert	=	"User certificate"
bond_diff_speed_confirm	=	"Create bond on interfaces with different speed may not be able to reach the expected speed. Do you want to continue?"
bond_ip_conflict	=	"The current IP is in conflict with {0}.<br>The IP of {0} will be reset to default value (DHCP)."
bond_slaves	=	"Physical devices"
bond_slaves_desc	=	"Select the interfaces to create Link Aggregation."
bonjourPrinter_enable	=	"Enable Bonjour Printer Broadcast"
bonjourPrinter_subject	=	"Bonjour Printer Broadcast"
cfrm_remove_dir_adm	=	"Are you sure you want to delete the following groups from domain administrators?"
cifs_disable_symlink_warn	=	"When you deselect "Allow symbolic links within shared folders", the system will disable "Enable VFS module to convert Mac special characters"."
cifs_enable_catia_warn_symlink	=	"When you select "Enable VFS module to convert Mac special characters", the system will enable "Allow symbolic links within shared folders"."
cifs_enable_encrypt_alert	=	"Selecting this option will disable <b>Enable Opportunistic Locking</b>. Please refer to {0}this help article{1} for more information."
cifs_large_mtu_enable	=	"Enable Large MTU"
cifs_lmb_enable_warm	=	"Enabling Local Master Browser will activate guest account without password."
cifs_offline_files_enable	=	"Support Windows offline files"
cifs_oplock	=	"Enable Opportunistic Locking"
cifs_recycle_bin	=	"CIFS Recycle Bin"
cifs_recycle_bin_clean	=	"Empty CIFS Recycle Bin"
cifs_recycle_bin_clean_abort	=	"Cancel emptying CIFS Recycle Bin"
cifs_recycle_bin_clean_abort_warn	=	"Warning: Emptying all CIFS Recycle Bins will be canceled. Are you sure you want to continue?"
cifs_recycle_bin_clean_warn	=	"Warning: CIFS Recycle Bins under all user home directories and shared folders will be emptied. Are you sure you want to continue?"
cifs_recycle_bin_enable	=	"Enable CIFS Recycle Bin"
cifs_recycle_bin_help_link	=	"How to set up a Recycle Bin emptying schedule"
cifs_recycle_bin_set_clean_policy	=	"Create Recycle Bin emptying schedule"
cifs_safe_recycle_bin	=	"Restrict access to administrators only"
cifs_smb1_enable	=	"SMB1"
cifs_smb2_enable	=	"SMB2"
cifs_smb2_large_mtu_enable	=	"SMB2 and Large MTU"
cifs_smb3_enable	=	"SMB3"
codepage	=	"code page"
codepage_subject	=	"Encoding"
consult_support_list	=	"Consult supported dongle list."
create_bond	=	"Create Bond"
create_bond_confirm	=	"Services on each bonded interface, for example firewall rule and DHCP Server settings, will be disabled once bond is created. Do you want to proceed?"
determined_by_client	=	"Client defined"
dhcp_feasibility_check_fail	=	"Failed to change DHCP settings due to the following reasons: {0}"
dhcp_to_static_warning	=	"The IP address is DHCP reserved. Please set a static IP address without DHCP reservation."
disable_smb_time_machine_mdns	=	"If you disable SMB durable handles or SMB2 lease, the Bonjour Time Machine broadcast via SMB will be disabled."
dns_change	=	"System DNS server settings will be changed if you specify a DNS server IP."
domain_acc_err	=	"Invalid user name or password, or the account has expired. Please contact the domain administrator."
domain_acc_revoked_ads	=	"This account has been disabled or expired, or is not allowed to logon now. Please contact the domain administrator."
domain_acc_revoked_rpc	=	"This account has been disabled. Please contact the domain administrator."
domain_advanced_option_desc	=	"Advanced domain options (Required only under specific network environment)"
domain_change_passwd	=	"The account password needs to be changed before logon. Please contact the domain administrator."
domain_check_kdcip	=	"Cannot find the domain workgroup. Please enter a correct DC IP."
domain_dns_name_err	=	"Failed to join domain. Please check the DNS server settings and make sure the domain is registered on the DNS server."
domain_empty_acc	=	"No user name was entered."
domain_error_misc_rpc	=	"This account is not allowed to logon now, or cannot logon to the workstation, or the account password needs to be changed before logon. Please contact the domain administrator."
domain_join	=	"Domain/Workgroup"
domain_join_err	=	"Unable to join the domain. Please check your domain and firewall settings and try again."
domain_join_nt4	=	"You have joined an NT4-type domain. If you have joined by mistake, please make sure the entered domain information is correct and rejoin."
domain_kdc_ip	=	"DC IP/FQDN"
domain_kdc_ip_error	=	"Invalid DC IP."
domain_name_err	=	"Invalid domain name. Please check the DNS setting of the domain server and use complete domain name to join."
domain_notadminuser	=	"Permission denied. Please use an account that belongs to the administrators group on the domain to join."
domain_option_dc_fqdn	=	"Domain FQDN (DNS name)"
domain_option_dc_netbios	=	"Domain NetBIOS name"
domain_option_dns	=	"DNS Server"
domain_options	=	"Domain Options"
domain_options_sync_time_enable	=	"_DISKSTATION_ will synchronize with an NTP server every time a domain user logs in"
domain_password_err	=	"Invalid user name or password."
domain_port_unreachable_err	=	"Failed to connect to the domain controller (DC) via TCP port 445. Please check the network and firewall settings of the DC."
domain_set_admin	=	"Domain Administrators"
domain_type	=	"Domain server type"
domain_unreachserver_err	=	"Unable to join the domain because the domain controller cannot be detected."
edit_route_gateway_order	=	"Edit Service Order"
enable_durable_handles	=	"Enable SMB durable handles (Cross-protocol file locking will be disabled)"
enable_http_negotiate	=	"Enable integrated Windows authentication"
enable_http_negotiate_dsm_7	=	"IWA"
enable_ip_conflict_detection	=	"Enable IP conflict detection"
enable_ovs	=	"Enable Open vSwitch"
enable_ovs_desc	=	"Open vSwitch is required for running Virtual Machine Manager."
enable_smb2_leases	=	"Enable SMB2 lease"
enable_smb_for_file_brose_router	=	"Please enable {0} to access your storage device via file browsers."
enable_static_dns	=	"Manually configure DNS server"
enable_vlan	=	"Enable VLAN (802.1Q)"
err_bond_iface_diff_speed	=	"You can only select network interfaces of the same speed."
error_add_reservation	=	"Failed to add the address."
error_applying_network_setting	=	"Applying network configuration, please wait."
error_bad_broadcast_ip	=	"The IP address you entered is invalid because it is a broadcast address."
error_badgname	=	"The workgroup name is invalid or contains invalid characters."
error_badwins	=	"The WINS IP address is invalid."
error_conflict_upnp_extif	=	"The external interface you have selected is already used. Please try another."
error_testjoin	=	"Cannot find the specified domain."
ethernet_get_setting_fail	=	"Failed to get wired network settings."
ethernet_set_fail	=	"Failed to configure wired network."
ethernet_set_setting_fail	=	"Failed to configure wired network settings."
ext_lan_desc	=	"Extension adaptor"
get_redirect_info_fail	=	"Failed to get redirection information."
goto_directory_service_for_dns_desc	=	"DNS server settings can be changed in {0}."
hostname_change_confirm	=	"You have changed the Server Name. The change will be applied after refreshing the web page. All currently running services will be closed.<br>Do you want to refresh the page now?"
hostname_feasibility_check_fail	=	"Failed to apply the server name due to the following reasons: {0}"
http_negotiate_iwa_info	=	"Integrated Windows Authentication ({0})"
if_bond	=	"Bond"
if_hotspot	=	"Hotspot"
if_internet	=	"Internet"
if_wimax	=	"Wimax"
if_wireless	=	"Wireless"
if_wireless_lan	=	"Wireless LAN"
interface	=	"Network Interface"
interface_block_msg	=	"You cannot edit {0} because {1} is currently active on this interface."
interface_invalid	=	"Invalid network interface."
interface_not_found	=	"No such network interface."
interface_not_support	=	"Unsupported network interface."
interface_type	=	"Type"
ip_assign_dhcp	=	"DHCP"
ip_assign_static	=	"Static IP"
ipv4_first	=	"First use IPv4 address to resolve domain names"
ipv4_system_preserved	=	"This IP address is reserved for system use only. Please select another address and make sure it is not one of the following: {0}."
iwa_help_url	=	"https://kb.synology.com/DSM/help/DSM/AdminCenter/file_directory_service_configuration"
linkaggr_8023ad_error	=	"Failed to establish IEEE 802.3ad connection."
linkaggr_cfrm_stop_pppoe	=	"Warning: This action will restart PPPoE. Are you sure you want to continue?"
linkaggr_configure	=	"Link Aggregation"
linkaggr_desc	=	"Link Aggregation"
linkaggr_enable	=	"Enable Link Aggregation"
linkaggr_mode	=	"Link Aggregation Mode"
linkaggr_mode_8023ad	=	"IEEE 802.3ad Dynamic Link Aggregation"
linkaggr_mode_alb	=	"Adaptive Load Balancing"
linkaggr_mode_failover	=	"Active/Standby"
linkaggr_mode_future	=	"Select a Link Aggregation mode"
linkaggr_mode_inconsistent_err	=	"The configuration of Open vSwitch has been changed. Please try again."
linkaggr_mode_now	=	"Current setting"
linkaggr_mode_select	=	"To enable Link Aggregation for network fault tolerance or load balancing, please select one of the following modes"
linkaggr_mode_xor	=	"Balance XOR"
linkaggr_modified	=	"Change Link Aggregation mode"
linkaggr_tip_8023ad	=	"Used for connecting the switches configured as Dynamic Link Aggregation (IEEE 802.3ad LACP)."
linkaggr_tip_8023ad_switch	=	"IEEE 802.3ad LACP must be enabled on your switch beforehand."
linkaggr_tip_alb	=	"Does not require any special network-switch support."
linkaggr_tip_failover	=	"It provides fault tolerance only."
linkaggr_tip_xor	=	"Used for connecting the switches configured as Static Link Aggregation (IEEE 802.3ad draft v1)."
mac	=	"MAC"
mac_finder	=	"Finder"
mac_user	=	"macOS user"
mtu_warning_msg	=	"Modifying the MTU will restart network services. Are you sure you want to continue?"
need_disjoin_gluster	=	"Please disjoin from gluster firstly"
net_daemon_not_ready	=	"Network daemon not ready, please wait ..."
net_get_fail	=	"Failed to get network information."
net_get_setting_fail	=	"Failed to get network settings."
net_iface_change_confirm	=	"The following tasks will be affected. Are you sure you want to continue?"
net_iface_change_stop	=	"The action has been stopped for the following reasons. Please resolve the issues and try again."
net_set_fail	=	"Failed to set network."
net_set_setting_fail	=	"Failed to configure network settings."
netif_wins	=	"WINS server"
network_address	=	"Address"
network_dhcp_err	=	"Failed to enable DHCP Server."
network_dhcp_setting	=	"DHCP Server Settings"
network_dhcp_switch	=	"Enable DHCP Server"
network_lmb_enable	=	"Enable Local Master Browser"
network_manage	=	"Manage"
network_time_machine	=	"Time Machine"
network_time_machine_folders	=	"Set Time Machine Folders"
network_topology_ap	=	"Wireless AP"
network_topology_ap_confirm	=	"Warning: Switching to Wireless AP will clear all firewall and VLAN settings. Are you sure you want to continue?"
network_topology_ap_desc	=	"Your _DISKSTATION_ will work as a wireless AP bridged to your local network, and will connect to the Internet via a router."
network_topology_configuration	=	"Network Map"
network_topology_confirm	=	"Warning: Switching Network Map Configuration will clear all firewall settings. Are you sure you want to continue?"
network_topology_router	=	"Wireless Router"
network_topology_router_desc	=	"Your _DISKSTATION_ is a wireless router which connects to the Internet via DSL/Cable modem."
network_topology_selection	=	"How do you set up the network map of _DISKSTATION_?"
network_topology_selection_dongle	=	"How do you set up your Wi-Fi network?"
network_topology_sta	=	"Join Wireless Network"
network_topology_sta_desc	=	"Your _DISKSTATION_ will join your wireless network."
network_topology_sta_desc_dongle	=	"Your Synology product will join the wireless network."
network_upnp_err	=	"Failed to enable UPnP."
network_upnp_switch	=	"Enable UPnP"
network_wifi_mode_configuration	=	"WiFi Setup"
network_wifi_mode_hotspot	=	"Wireless AP"
network_wifi_mode_station	=	"Join Wireless Network"
pppoe_relay	=	"PPPoE relay"
pppoe_relay_enabled	=	"Enable PPPoE relay"
pppoe_relay_notify	=	"PPPoE relay allows clients that are connected to the local network of the _DISKSTATION_ to access the Internet via PPPoE."
proxy_enabled	=	"Connect via a proxy server"
proxy_enabled_adv	=	"Use different proxy servers"
proxy_enabled_auth	=	"Enable proxy authentication"
proxy_enabled_bypass_local	=	"Bypass proxy server for local addresses"
proxy_setting_http	=	"HTTP Proxy"
proxy_setting_https	=	"HTTPS Proxy"
proxy_title	=	"Proxy"
proxy_title_advanced	=	"Advanced Settings"
proxy_warning_host_blank	=	"Your proxy server settings are empty. Please at least enter an address for proxy server."
remove_bond	=	"Remove"
remove_bond_confirm	=	"To remove this interface will disable related services, such as firewall rules and PPPoE connection. Are you sure you want to continue?"
remove_bond_firewall_pppoe	=	"To remove this interface will disable related services, such as firewall rules and PPPoE connection."
route_dns	=	"DNS Server"
route_gateway	=	"Gateway"
route_gateway_order	=	"Service Order"
route_gateway_order_intro	=	"It is required to set a gateway on at least one interface to change the service order."
route_gateway_warning	=	"At least one gateway should be set to avoid connectivity loss."
route_interface	=	"Interface"
route_main_table	=	"Main table"
route_mask	=	"Netmask"
route_metric	=	"Metric"
route_multi_gateway_enable	=	"Enable Multiple Gateways"
route_network	=	"Network Destination"
route_next_hop	=	"Next Hop"
route_policy_route_enable	=	"Reply to ARP request if the target IP address is identical to a local address configured on the incoming interface."
route_prefix_length	=	"Prefix Length"
route_static	=	"Static Route"
route_static_rule_danger	=	"This setting may cause disconnection to the Internet and _OSNAME_."
route_static_rule_error	=	"Invalid or duplicate rule."
route_static_table	=	"Static table"
route_table	=	"IP Routing Table"
route_table_prefix	=	"table"
samba_enable	=	"Enable SMB service"
service_restart_warning	=	"Network service will restart when these settings are applied."
sfp_module_unsupported	=	"Please install a supported module."
sfp_module_unsupported_port_disable	=	"The driver of the network interface card has been disabled. Please install a supported module and restart your system."
share_access_prompt	=	"Enter the following address to access shared folders using a computer in your local network:"
share_access_prompt_mac	=	"Mac"
share_access_prompt_pc	=	"PC"
smb1_warn	=	"<b>We strongly advise against using SMB1</b> because this older protocol has known security issues related to ransomware and other malware."
smb_access_based_share_enum	=	"Hide shared folders from users without permission"
smb_app_name	=	"SMB Service"
smb_avail_protocol	=	"SMB range"
smb_clear_tdb	=	"Clear SMB cache"
smb_confirm_disable_multichannel	=	"Creating bond will cancel <b>Enable SMB3 Multichannel</b> in SMB's Advanced Settings and restart the SMB service. Are you sure you want to create bond?"
smb_delete_vetofiles	=	"Allow to delete a directory that contains veto file"
smb_disable_shadow_copy	=	"Disallow access to Previous Versions"
smb_disable_strict_allocate	=	"Do not reserve disk space when creating files"
smb_enable_aio_read	=	"Enable asynchronous read"
smb_enable_btrfs_clone	=	"Enable Btrfs fast clone"
smb_enable_dirsort	=	"Enable DirSort VFS module"
smb_enable_dirsort_desc	=	"This option sorts directory items alphabetically before sending them to clients."
smb_enable_durable_handles_warn_fruit_locking	=	"This option cannot take effect if you already enabled SMB durable handles."
smb_enable_msdfs	=	"Enable MSDFS VFS module"
smb_enable_msdfs_desc	=	"This option allows symbolic links to point to other SMB servers."
smb_enable_ntlmv1_auth	=	"Enable NTLMv1 authentication"
smb_enable_strict_sync	=	"Synchronize data to drive immediately upon SMB client request"
smb_enable_symlink	=	"Allow symbolic links within shared folders"
smb_enable_syno_catia	=	"Enable VFS module to convert Mac special characters"
smb_enable_synotify	=	"Monitoring changes on all subfolders within the directory"
smb_enable_vetofile	=	"Veto files"
smb_enable_widelink	=	"Allow symbolic links across shared folders"
smb_encrypt_transport	=	"Transport encryption mode"
smb_enhance_log	=	"Collect debug logs"
smb_fruit_copyfile	=	"Enable server-side copy support"
smb_fruit_copyfile_desc	=	"File copy processes are executed directly on the server to prevent file transfer latency. During this time, certain operations on the client may be paused until the file copy process is complete."
smb_fruit_locking	=	"Enable cross-protocol locking with AFP"
smb_general	=	"General"
smb_mac	=	"macOS"
smb_max_protocol	=	"Maximum SMB protocol"
smb_min_protocol	=	"Minimum SMB protocol"
smb_msdfs_rule	=	"Portal Settings"
smb_msdfs_title	=	"Aggregation Portal"
smb_others	=	"Others"
smb_reset_on_zero_vc	=	"Disable multiple connections from the same IP address"
smb_vetofile_list	=	"Veto criteria"
status_connected	=	"Connected"
status_disconnected	=	"Disconnected"
suggest_mac_user_to_enable_catia	=	"We recommend enabling this option for macOS client devices. VFS modules convert special characters in the filename to provide enhanced compatibility between macOS and Synology NAS."
syno_wildcard_search	=	"Enable wildcard search cache"
time_change	=	"When this _DISKSTATION_ is joined to the domain, the system time will be synchronized with the domain controller. The domain controller will become the NTP server."
total	=	"Total"
upnp_client_list	=	"UPnP client list"
upnp_destination_ip	=	"Destination IP"
upnp_destination_port	=	"Destination port"
upnp_protocol	=	"Protocol"
upnp_service_enabled	=	"Configure as UPnP Internet Gateway"
upnp_source_port	=	"Source port"
usbmodem_apn	=	"APN"
usbmodem_apn_information	=	"Choose your APN settings."
usbmodem_applyerror	=	"Failed to apply settings."
usbmodem_area_code	=	"Area Code"
usbmodem_carrier	=	"Carrier"
usbmodem_cell_id	=	"Cell ID"
usbmodem_choose_automatically	=	"Choose by location and carrier"
usbmodem_confirm_pin	=	"Confirm PIN"
usbmodem_current_pin	=	"Current PIN"
usbmodem_daemon_not_ready	=	"USB Modem daemon not ready, please wait ..."
usbmodem_error_pin	=	"The PIN you entered is incorrect. Please try again."
usbmodem_error_puk	=	"The PUK you entered is incorrect. Please try again."
usbmodem_error_puk_remaining	=	"The wrong PUK has been entered too many times. Please contact your carrier for help."
usbmodem_input_information	=	"Set up your connection."
usbmodem_input_pin_desc	=	"Enter the current PIN to make modifications. PIN protection can be disabled to allow automatic connections."
usbmodem_input_puk_desc	=	"Please enter the PUK to unlock the SIM card."
usbmodem_isp	=	"Carrier"
usbmodem_isp_setting	=	"Mobile Network Settings"
usbmodem_location	=	"Location"
usbmodem_location_info	=	"Location Info"
usbmodem_manual	=	"Manual"
usbmodem_name	=	"Mobile"
usbmodem_new_pin	=	"New PIN"
usbmodem_no_dongle_tip	=	"Please insert a 3G/4G dongle."
usbmodem_no_sim_warning	=	"The SIM card is not detected. Please make sure it is inserted."
usbmodem_phone_number	=	"Phone number"
usbmodem_pin_protect_enable	=	"Enable PIN protection"
usbmodem_pin_protect_unlock_desc	=	"The SIM card is PIN protected. Please enter your PIN to unlock."
usbmodem_puk	=	"PUK"
usbmodem_remaining_attempt	=	"Remaining attempts"
usbmodem_remove_profile	=	"This profile will be removed. Do you want to continue?"
usbmodem_roaming	=	"Roaming"
usbmodem_set_as_default_gw	=	"Set as default gateway"
usbmodem_set_as_default_gw_desc	=	"Enabling this option allows the _DISKSTATION_ to access the Internet via this connection."
usbmodem_setting	=	"Settings"
usbmodem_signal_detail	=	"Signal Details"
usbmodem_signal_na	=	"N/A"
usbmodem_signalstrength	=	"Signal strength"
usbmodem_sim_broken_warning	=	"The SIM card cannot be accessed. Please contact your carrier."
usbmodem_sim_setting	=	"SIM Settings"
usbmodem_sim_unlock	=	"SIM Unlock"
usbmodem_title	=	"3G & 4G"
use_dhcp	=	"Use DHCP"
use_dhcp_domain	=	"Apply the domain name provided by DHCP server"
user_account	=	"Username"
user_pass	=	"Password"
vlan_notify	=	"<font class="red-status"><b>Important: </b></font>Make sure your client computer is also tagged to the same VLAN. If your client computer and the _DISKSTATION_ is not within the same VLAN, access to _DISKSTATION_ services using the client computer will not be available until you reset the network settings of your _DISKSTATION_ via the RESET button."
warning_forbid_network_setting	=	"This server belongs to a high-availability cluster. To change network settings, please go to the Network Settings page of Synology High Availability."
warning_num_nic_limit	=	"The maximum supported amount of Ethernet ports is exceeded ({0}). Please check the specification of the network card on the PCIe slot {1} for the supported amount of Ethernet ports. The system enables the Ethernet ports by order."
windows_explorer	=	"Windows Explorer"
wireless_connect_success_ip_failed	=	"The wireless client cannot obtain an IP address automatically."
wnds_domain	=	"Domain"
wnds_file_service	=	"SMB"
wnds_group	=	"Workgroup"
wnds_subject	=	"Windows Network"
wol_enable	=	"Enable Wake on LAN"
wol_legend	=	"Wake on LAN"
wol_mulitple_enable	=	"Enable WOL on {0}"
wol_send_failed	=	"Unable to send Wake on LAN message. Please check your network status or try again later."
wol_setting_fail	=	"Failed to set up Wake on LAN."
wol_single_enable	=	"Enable WOL on LAN"
workgroup_in_domain	=	"Modifying the workgroup is not available because this _DISKSTATION_ has joined to a domain."

[next_text]
help_browser	=	"Get all the helps you need."

[nfs]
feasibilitycheck_nfs_restart	=	"NFS service: The service will be temporarily disabled and automatically re-enabled afterwards. This affects shared folders on all volumes using this service."
nfs_access_right	=	"Privilege"
nfs_async	=	"Asynchronous"
nfs_async_enable	=	"Enable asynchronous"
nfs_auth_sys	=	"AUTH_SYS"
nfs_avail_protocol	=	"NFS range"
nfs_create_static_mapping	=	"Create ID mapping"
nfs_crossmnt	=	"Cross-mount"
nfs_crossmnt_desc	=	"Allow users to access mounted subfolders"
nfs_custom_port	=	"Customized ports"
nfs_default_map_list	=	"Suggested Mapping List"
nfs_edit_rule	=	"Edit NFS rule"
nfs_edit_static_mapping	=	"Edit ID mapping"
nfs_edit_title	=	"Edit NFS Permissions of {0}"
nfs_enable	=	"Enable NFS service"
nfs_enable_version_4	=	"Enable NFSv4 service"
nfs_enable_version_4_1	=	"Enable NFSv4 and NFSv4.1 services"
nfs_error_nohost	=	"No hostname or IP was entered."
nfs_fail_load_rules	=	"Failed to load NFS permissions"
nfs_fieldtitle_host	=	"Single host"
nfs_fieldtitle_netmask	=	"Network segment"
nfs_fieldtitle_wildcard	=	"Wildcards"
nfs_hint_host	=	"You may specify a host in three ways"
nfs_host	=	"Hostname or IP"
nfs_host_position	=	"Client"
nfs_hostname_error	=	"Cannot resolve hostname to ip address, you can use speicif ip or wildcard instead."
nfs_idmap_delete_confirm_desc	=	"The selected entries will be deleted. Do you want to continue?"
nfs_insecure_port	=	"Non-privileged port"
nfs_insecure_port_desc	=	"Allow connections from non-privileged ports (ports higher than 1024)"
nfs_kerberos_authentication	=	"Kerberos authentication"
nfs_kerberos_desc	=	"Configure Kerberos authentication settings by importing keys and mapping principals to local user accounts."
nfs_kerberos_disabled_desc	=	"A Kerberos key must be imported to make Kerberos work. Would you like to go to the settings page now?"
nfs_kerberos_import_keys	=	"Import"
nfs_kerberos_integrity	=	"Kerberos integrity"
nfs_kerberos_keys	=	"Kerberos Keys"
nfs_kerberos_privacy	=	"Kerberos privacy"
nfs_kerberos_setting	=	"Kerberos Settings"
nfs_key_encrypt	=	"Encryption type"
nfs_key_overwrite_confirm	=	"The existing key will be overwritten. Are you sure you want to continue?"
nfs_key_version	=	"Version"
nfs_key_wrong_format	=	"Unsupported key format"
nfs_krb5_princ	=	"Kerberos Principal"
nfs_krb5_princ_conflict	=	"The Kerberos principal you entered has already been mapped to a local user. Please enter another Kerberos principal."
nfs_krb5_principal	=	"Principal"
nfs_mapping	=	"Squash"
nfs_mapping_all	=	"Map all users to admin"
nfs_mapping_all_guest	=	"Map all users to guest"
nfs_mapping_no	=	"No mapping"
nfs_mapping_yes	=	"Map root to {0}"
nfs_max_protocol	=	"Maximum NFS protocol"
nfs_mount_path	=	"Mount path"
nfs_mount_path_v4	=	"Mount path (NFSv4)"
nfs_new_rule	=	"Create an NFS rule"
nfs_nlm_port	=	"nlockmgr port"
nfs_nonprivileged_port_allow	=	"Allowed"
nfs_nonprivileged_port_deny	=	"Denied"
nfs_prefer_read_size	=	"Read packet size"
nfs_prefer_rw_size_desc	=	"Modify the default read/write packet size below."
nfs_prefer_write_size	=	"Write packet size"
nfs_privilege	=	"Privilege"
nfs_privilege_setup	=	"NFS Permissions"
nfs_read_only	=	"Read only"
nfs_read_write	=	"Read/Write"
nfs_refer_faq	=	"For more information, refer to <a class="link-font" target="_blank" href="https://kb.synology.com/DSM/tutorial/nfs_faq">Frequently asked questions about NFS</a>."
nfs_root_mapping	=	"Root squash"
nfs_root_mapping_no	=	"No mapping"
nfs_rule_host_exist	=	"An NFS rule has been applied to this host. Please choose another host."
nfs_rule_wildcard_misuse_error	=	"IP address can not contain wildcard. Please use subnet mask."
nfs_security	=	"Security"
nfs_select_import_key	=	"Import a file containing a Kerberos key."
nfs_service_not_enable	=	"The NFS service is not enabled. Do you want to go to the setup page now?"
nfs_share_permission_desc	=	"You can edit NFS permissions for shared folders on the edit page of {0}."
nfs_statd_port	=	"statd port"
nfs_static_mapping	=	"ID Mapping"
nfs_support_64bit_cookie	=	"Use 64-bit cookies"
nfs_tab_title	=	"NFS rule"
nfs_title	=	"NFS Service"
nfs_v4_1_domain	=	"NFSv4/4.1 domain"
nfs_v4_domain	=	"NFSv4 domain"

[nfs_mapping]
nfs	=	"Squash"

[notestation]
feasibility_delete_volume	=	"This volume is used by Note Station. Before deleting this volume, please move the data in Note Station to another volume or uninstall Note Station."

[notification]
accessible_unread_messages	=	"{0} unread notifications"
add_http_header	=	"Add Header"
add_new_rule_template	=	"Add"
add_recipient_empty_text	=	"Click "Add" to add recipients."
add_recipient_title	=	"Add Recipient Profile"
add_rule	=	"Add Profile"
add_rule_template_title	=	"Create Rule"
add_template	=	"Create"
alert_cfrm	=	"You have not entered the SMTP server nor the primary email address. Are you sure you do not want to receive email notification?"
alert_confirmpass	=	"Failed to confirm password. Please enter it again."
alert_email1	=	"Primary email"
alert_email2	=	"Secondary email"
alert_email_not_enable	=	"Enabling notifications allows your _DISKSTATION_ to notify you when specified events occur, such as system errors, network connection loss, abnormal fan behavior, power failure, or backup task failure."
alert_email_on_close	=	"You can enable notifications later at <b>Control Panel</b> > <b>Notification</b>."
alert_google_oauth	=	"Please sign in to Gmail first."
alert_help2	=	"You must enter the SMTP server and the primary email address in order to receive notification."
alert_intro	=	"Receive notifications via email when system status changes or errors occur."
alert_mail_verification_failed	=	"Verification mail failed to send. Please check your settings and try again."
alert_mail_verification_success	=	"A new verification mail has been sent. Please follow the instructions in the new mail to verify your email address. If you cannot find the verification mail in your inbox, please check your spam or filters, or try with another email service provider."
alert_outlook_oauth	=	"Please sign in to Outlook first."
alert_port	=	"SMTP port"
alert_rsync_pass_reset	=	"You have changed your username to the default user of the network backup service. Please reset your password to ensure network backup is functional."
alert_skype_msn_not_support	=	"Sorry, due to discontinued support from the official developer, the push services for Skype and MSN are no longer available in _OSNAME_."
alert_smtp	=	"SMTP server"
alert_smtp_need_auth	=	"Authentication required"
alert_smtp_pass	=	"Password"
alert_smtp_pass_confirm	=	"Confirm password"
alert_smtp_user	=	"Username"
alert_subject	=	"Notification Setup"
alert_subject_prefix	=	"Subject prefix"
alert_test	=	"Send Test Email"
alert_use_ssl	=	"Secure connection (SSL/TLS) required"
alert_userpass	=	"You must enter the username and password for authentication."
all_notification	=	"All Notifications"
category_AHA	=	"High-Availability Cluster"
category_HA	=	"High-availability cluster"
category_all	=	"All notifications"
category_backup_restore	=	"Backup and restoration"
category_data_protection	=	"Snapshot Replication"
category_external_storage	=	"External storage"
category_important	=	"Critical"
category_information	=	"Informative"
category_power	=	"Power supply"
category_security_advisor	=	"Security Advisor"
category_site_recovery	=	"Disaster Recovery"
category_storage	=	"Internal storage"
category_system	=	"System"
category_title	=	"Category"
category_usbcopy	=	"USBCopy"
chrome_desktop_notification_note	=	"If you cannot enable or would like to change the settings of desktop notifications, please go to the settings page of your web browser to manage notification settings."
cms_enable	=	"Enable centralized notifications"
cms_enable_desc	=	"You can enable centralized notifications to forward notifications from this server to the CMS Host when status changes or errors occur."
cms_send_test	=	"Send a test message"
cms_template_desc	=	"This rule is used to forward notifications from this _DISKSTATION_ to the CMS Host."
cms_test_notification_sent	=	"A test message has been sent to CMS on {0}."
cms_title	=	"CMS"
configure_webhook_http_request	=	"Configure HTTP requests"
configure_webhook_provider_header	=	"Set up {0} webhook notifications"
confirm_clear_text	=	"All desktop notifications will be cleared. Are you sure you want to continue?"
custom_mail_server_desc	=	"Send welcome mail, password recovery, or messages from other applications via an email server of your choice."
default_rule_delete_tip	=	"{0} is a system default rule and cannot be deleted."
default_template_readonly_desc	=	"{0} is a default rule and cannot be modified or deleted."
delete_greater_than_5_mail	=	"If you delete the profile, {0} recipients will no longer receive system notifications. Are you sure you want to delete this profile?"
delete_less_than_6_mail	=	"If you delete the profile, the following recipient will no longer receive system notifications. Are you sure you want to remove the following recipients:<br>{0}"
delete_many_mails	=	"If you delete this profile, these {0} recipients will no longer receive system notifications. Are you sure you want to delete this profile?"
delete_several_mails	=	"If you delete this profile, the following recipients will no longer receive system notifications. Are you sure you want to delete this profile?<br>{0}"
delete_single_mail	=	"If you delete the profile, the following recipient will no longer receive system notifications. Are you sure you want to delete this profile?<br>{0}"
delete_single_mail_toast	=	"The profile has been deleted."
delete_single_rule_template	=	"Are you sure you want to delete rule {0}?"
delete_single_rule_template_toast	=	"Deleted rule: {0}"
delete_single_webhook	=	"If you delete this webhook, you will no longer receive system notifications via {0}. Are you sure you want to continue?"
delete_single_webhook_toast	=	"This webhook has been deleted."
description_title	=	"Description"
desktop_notification	=	"Enable desktop notification"
detail_window	=	"Event Detail"
edit_notification_format	=	"Edit Variables"
edit_recipient_desc	=	"You can configure several recipient profiles to receive notifications for different events. Each profile can include multiple email addresses."
edit_recipient_note	=	"To learn more about rules, go to Notification > <a link-id='gotoNotificationRule'>Rules</a>."
edit_recipient_title	=	"Edit Recipient Profile"
edit_rule_template_title	=	"Edit Rule"
edit_webhook_title	=	"Edit {0} Webhook"
email_label_sa	=	"Synology Account"
email_no_sender_desc	=	"An email sender is required for delivering system notifications."
email_no_sender_mask	=	"Please set up sender first."
email_no_sender_title	=	"Set up an email sender"
email_recipient_invalid	=	"Some of the email address formats are invalid. Please check the format."
email_recipient_placeholder	=	"Email address"
email_recipient_tooltip	=	"Use a space, semicolon (;), comma (,), or "Enter" to separate email addresses."
email_section_email_settings	=	"Email Settings"
email_section_synology_account	=	"Synology Account"
email_set_sender	=	"Set Up"
email_sign_in	=	"Sign In"
email_subject_prefix_desc	=	"Add a prefix for your email subject line. This helps you distinguish the sender/device of the email."
empty_webhook	=	"No webhooks set up"
enable_chrome_desktop_notification	=	"Enable browser desktop notifications"
error_delete_default_rule_template	=	"Default rules cannot be deleted."
error_duplicate_template_name	=	"A rule with the same name already exists."
error_em1	=	"The primary email address is not valid."
error_em2	=	"The secondary email address is not valid."
error_get_verification	=	"Failed to get recipient's verification status."
error_invalid_http_body	=	"Invalid HTTP body. Please refer to your service provider's API documents and enter a valid HTTP body."
error_line_channel_id	=	"Unable to generate the QR code due to an error with LINE access token. Please check your settings and try again."
error_line_invalid_channel	=	"HTTP 401 error. Please make sure your Messaging API channel is valid."
error_line_invalid_credential	=	"HTTP 400 error. Please make sure the channel ID is correct. If the channel secret was changed, create a new webhook profile."
error_line_test_msg	=	"Unable to recognize the Messaging API channel. Please make sure the channel ID and channel secret are correct."
error_sameem	=	"The primary email address is the same as the secondary one. Please change the secondary email address."
error_smtp	=	"The server address you have entered is not valid."
error_webhook_send_test	=	"Unable to send test message. Please check your settings and try again."
feasibility_check_push_mail	=	"Email Notification"
general_setting	=	"General Settings"
google_auth_failed	=	"Gmail OAuth refresh token error. Please check your network connection or sign in to your Google account again."
goto_lang_setting	=	"Set Notification Language"
goto_lang_setting_desc	=	"The language of the notification messages can be configured in {0}."
http_body	=	"HTTP Body"
http_header	=	"HTTP Header"
is_send_verify_mail_title	=	"Send verification email?"
label_by_category	=	"By Category"
label_by_importantce	=	"By Priority"
label_mail_server	=	"Email server"
label_push_mail_server	=	"Use email server hosted by Synology"
label_smtp_mail_server	=	"Use custom email server"
label_smtp_provider	=	"Service provider"
label_smtp_sender_mail	=	"Sender email"
label_smtp_sender_name	=	"Sender name"
line_add_friend_desc	=	"Your _DISKSTATION_ will send notifications through webhooks to this LINE channel. To receive notifications, scan the QR code to add the channel as a friend. Notifications are only sent to the user whose user ID was used for creating this LINE channel."
line_add_friend_title	=	"Add LINE Official Account as a friend"
line_auth_failed_desc	=	"Please check your channel ID or channel secret and try again."
line_auth_failed_title	=	"Authentication failed"
line_channel_id	=	"Channel ID"
line_channel_id_desc	=	"Only the owner of this user ID will receive notification through this channel. Please make sure to scan the QR code with the correct LINE account."
line_channel_secret	=	"Channel secret"
line_user_id	=	"User ID"
mail_in_use	=	"Email notification service is still in use for either password reset or 2-factor authentication. Are you sure you want to continue?"
mail_notification_enable	=	"Enable email notifications"
mail_recipient	=	"Recipients"
mail_recipient_added_toast	=	"{0} recipients added."
mail_recipient_description	=	"You can configure 3 separate recipient profiles to send different notifications. Go to <b>Notification</b> > <b>Rules</b> to customize the rules for each profile."
mail_recipient_header	=	"Recipient Profiles"
mail_sender_header	=	"Sender"
mail_service_custom_not_enable	=	"Please enable the email notification service and use custom email server. Do you want to go to the setup page now?"
mail_service_not_enable	=	"The sender for the email notification service has not been configured. Do you want to go to the setup page now?"
mail_service_not_enable_revised	=	"Email notification is currently disabled. Configure the sender and recipient to enable the service. Do you want to go to the setup page now?"
mail_test_failed	=	"Test mail failed to send. Please check your settings and try again."
mail_test_success	=	"A test email has been sent. If you do not receive an email, please make sure the settings are correct."
mail_verification_confirm	=	"A verification mail has been sent. If you cannot find the verification mail in your inbox, please check your spam or filters, or try with another email service provider.<br>Do you want to send the verification mail again? The verification link in the previous mail will become invalid if you choose "Yes.""
message_customize_note	=	"Push service and webhooks will contain the subject only."
message_deleted_multiple	=	"{0} notification messages have been deleted."
message_deleted_single	=	"1 notification message has been deleted."
message_field_label_event	=	"Event"
message_field_title	=	"Edit Text"
minutes	=	"Minutes"
more	=	"Details"
notification_content	=	"Events"
notification_critical	=	"Every time when volume capacity drops 1% below"
notification_critical_smaller_than_warning	=	"The critical value should be smaller than the warning value."
notification_customize	=	"Edit Message"
notification_customize_desc	=	"Customize the subject and content of the notification below. SMS and push notifications will contain the subject only."
notification_customize_hint	=	"The string segments containing "%" will be replaced with actual system information when the notification is sent."
notification_customize_reset	=	"Restore Defaults"
notification_customize_reset_confirm	=	"Are you sure you want to restore the default subject and content of this notification?"
notification_default_content	=	"Default content"
notification_default_subject	=	"Default subject"
notification_email	=	"Email"
notification_filecount_description	=	"_OSNAME_ will send a notification when the number of files that can still be added is below the following percentage in regard to the maximum limit."
notification_filecount_setting	=	"File Count Notification"
notification_filecount_value	=	"Percentage"
notification_filter	=	"Rules"
notification_format_note	=	"Refer to the <a link-id='helpArticle'>Help article</a> for more variables used in notification messages."
notification_line	=	"LINE"
notification_no_setting	=	"You have not entered the SMTP server nor the primary email address."
notification_quota_description	=	"_OSNAME_ will send a notification when the available quota reaches the specified percentage of the total quota."
notification_quota_editor_title	=	"Shared Folder Quota Notification"
notification_quota_value	=	"Percentage"
notification_sms	=	"SMS"
notification_subject	=	"Subject"
notification_teams	=	"Microsoft Teams"
notification_title	=	"Event"
notification_valid_range_warning	=	"The value can only range from {0} to {1}(%)."
notification_volume_critical_condition1	=	"Every time when volume capacity drops 1% below the defined threshold value"
notification_volume_critical_condition2	=	"When volume capacity drops below the defined threshold value"
notification_volume_critical_description	=	"Specify the threshold values for triggering notification messages. Messages will be sent when volume capacity reaches the following conditions:"
notification_volume_critical_list	=	"<ul><li>Every time when volume capacity drops 1% below the defined threshold value</li><li>When volume capacity drops below the defined threshold value</li></ul>"
notification_volume_description	=	"_OSNAME_ will send a notification when free space falls below the amount specified here."
notification_volume_setting	=	"Free Space Notification"
notification_volume_value	=	"Free space"
notification_warning	=	"When volume capacity drops below"
notification_webhook	=	"Webhooks"
notify_settings	=	"Notification"
outlook_auth_failed	=	"Outlook OAuth refresh token error. Please check your network connection or sign in to your Outlook account again."
parameter	=	"Parameter"
pkg_still_enabling_info	=	"Some packages are still being updated or activated along with the system update. The system may be busy now. Please go to Package Center > Installed to check the status of the packages."
pkg_still_enabling_title	=	"System Information"
profile_limit	=	"The maximum number of recipient profiles is 3"
profile_name_placeholder	=	"Profile name"
provider_name_title	=	"Provider Name"
push_mail_send_verify	=	"Send Verification Mail"
push_mail_server_desc	=	"Receive notifications directly in your Synology Account when system status changes or errors occur. These notifications are sent through Synology's email server."
push_mail_verify_note	=	"The recipient {0} has not been verified."
pushservice	=	"Push Service"
pushservice_desc	=	"Receive notifications via push service when system status changes or errors occur."
query_parameter	=	"Parameter"
recipient_email_label	=	"Email"
replacement	=	"Edit Variable"
rule_template	=	"Rule"
rule_template_desc	=	"You can create different notification rules for different system events. Each rule can be applied to multiple delivery channels, such as email or webhook."
rule_template_empty_desc	=	"This rule has not been applied to any delivery channels."
rule_template_name_label	=	"Rule name"
select_one_notification	=	"Please select an event."
select_webhook_provider	=	"Select notification rule and webhook provider"
send_verify_mail_desc	=	"We will send you a verification email. Please check your mailbox and click the link in the email to verify your email address."
send_verify_mail_toast	=	"A verification email has been sent."
sep_char_desc	=	"The default value is space. If you need to use other characters, refer to the service provider's API document. The following symbols cannot be used: / ? # [ ] : @"
sep_char_label	=	"Separator character"
service_not_enabled	=	"The following service used for notification has not been enabled. Please enable it first. {0}"
services_not_enabled	=	"The following services used for notification have not been enabled. Please enable them first. {0}"
set_sender_desc	=	"System notifications will be sent from this sender's email address."
set_sender_title	=	"Set Up Sender"
settings	=	"General"
setup_btn	=	"Set Up Now"
sms_api_key	=	"API access key"
sms_re_api_key	=	"Comfirm API access key"
sms_sender	=	"Short code"
sms_sendinblue_sender_restriction	=	"The name should be within 11 alphanumeric characters."
smtp_gmail_login	=	"Sign in to Gmail"
smtp_gmail_logout	=	"Log out of Gmail"
smtp_need_auth	=	"SMTP authentication"
smtp_provider_163	=	"163 Mail"
smtp_provider_aol	=	"Aol."
smtp_provider_custom	=	"Custom SMTP server"
smtp_provider_gmail	=	"Gmail"
smtp_provider_outlook	=	"Outlook"
smtp_provider_qq	=	"QQ"
smtp_provider_yahoo	=	"Yahoo!"
smtp_sender_mail_tip	=	"If blank, the first recipient's email address that you specified below will be used."
title_desktop	=	"Desktop"
un_select_all	=	"Deselect all"
unconfigured	=	"Reset sender"
unpair_single_device	=	"If you unpair the device, it will no longer receive system notifications. Are you sure you want to unpair {0}?"
unpair_single_device_toast	=	"Unpaired: {0}"
use_default_language_desc	=	"Enable this option to send the notification messages in English. If your webhook service provider does not support multi-languages, this will prevent the messages from being garbled."
use_default_language_label	=	"Send notification messages in English"
use_default_language_validate	=	"Please enter subject in English."
using_rule_delete_tip	=	"{0} has been applied to one or more notification delivery channels."
value	=	"Value"
variable_company_name_tooltip	=	"The signature that appears at the end of a notification message."
variable_field_hyperlink	=	"Hyperlink"
variable_field_signature	=	"Signature"
variable_field_title	=	"Edit Variables"
variable_http_url_tooltip	=	"A hyperlink to your _DISKSTATION_. If not specified, the system will list all possible links in the notification message."
variable_replacement_alert	=	"Please set a parameter with the value "@@TEXT@@"."
variable_replacement_desc	=	"Set up the required parameters according to the service provider's API documents.</br>Make sure you include a parameter with the value "<b>@@TEXT@@</b>", which will be replaced with _DISKSTATION_ event messages."
verify_server_certificate	=	"Verify the SSL/TLS certificate of SMTP server"
view	=	"View"
view_rule_template_title	=	"View Rule"
webhook_added_toast	=	"{0} webhook added"
webhook_interval_label	=	"Enable time interval between sending messages"
webhook_provider	=	"Provider"
welcome_mail_to_new_user	=	"Send welcome message to new users"

[notification_event]
AutoBlockAdd	=	"IP address blocked"
CpuFanResume	=	"CPU fan resumed"
CpuFanStop	=	"CPU fan stopped"
DDNSFail	=	"DDNS registration failed"
DeviceEjectedImproperly	=	"External device was not ejected properly"
DiskTemperatureAbnormal	=	"Disk Temperature is not within the operating temperature"
DsmProtectionCheckFailed	=	"System abnormality detected"
EBoxHDEcc	=	"I/O error in expansion unit disk"
ESATADiskFull	=	"eSATA disk full"
ESATAPartitionFull	=	"eSATA partition full"
EUnitPowerFail	=	"Redundant power supply of expansion unit failed"
EUnitPowerResume	=	"Redundant power supply of expansion unit recovered"
EboxFanResume	=	"Expansion unit fan resumed"
EboxFanStop	=	"Expansion unit fan stopped"
EboxLinkFail	=	"Expansion unit link abnormal"
EboxLinkResume	=	"Expansion unit link resumed"
ExpansionFrmInconsistent	=	"Expansion unit firmware inconsistent"
FailedToRunNtp	=	"Network time server sync failed"
HDEcc	=	"I/O error"
HotSpareDiskPlugout	=	"Global Hot Spare disk is unplugged."
HotSpareRepairDone	=	"Global Hot Spare repairing has completed"
HotSpareRepairFailed	=	"Global Hot Spare repairing has failed"
HotSpareRepairNoProtect	=	"Global Hot Spare: remind which spaces are not protected"
HotSpareRepairStart	=	"Global Hot Spare repairing is progressing"
ImproperShutdown	=	"Improper shutdown"
InternalDiskFail	=	"Internal disk failed"
InternalDiskIOError	=	"Internal I/O error"
InternalFanResume	=	"Internal fan resumed"
InternalFanStop	=	"Internal fan stopped"
LocalLUNBkpError	=	"Local LUN Backup failed"
LocalLUNBkpFinished	=	"Local LUN Backup completed"
LocalLUNRecoverError	=	"Local LUN restoration failed"
LocalLUNRecoverFinished	=	"Local LUN restoration completed"
LocalRecoverCanceled	=	"Local restoration canceled"
LocalRecoverError	=	"Local restoration failed"
LocalRecoverFinished	=	"Local restoration completed"
NetBkpError	=	"Network backup failed"
NetBkpOK	=	"Network backup completed"
NetBkpS3Cancel	=	"Amazon S3 backup canceled"
NetBkpS3Error	=	"Amazon S3 backup failed"
NetBkpS3OK	=	"Amazon S3 backup completed"
NetLUNBkpError	=	"Network LUN backup failed"
NetLUNBkpOK	=	"Network LUN backup completed"
NetLUNRecoverError	=	"Network LUN restoration failed"
NetLUNRecoverFinished	=	"Network LUN Restoration completed"
NetRecoverCanceled	=	"Network restoration canceled"
NetRecoverError	=	"Network restoration failed"
NetRecoverFinished	=	"Network restoration completed"
OverheatShutdownCPU	=	"CPU overheating shutdown"
OverheatShutdownDisk	=	"Disk overheating shutdown"
OverheatShutdownThermal	=	"Overheating shutdown"
Raid5SpareChanged	=	"RAID5+spare volume degraded"
RaidDiskFail	=	"HDD in the Disk Group failed"
RaidSystemVolumeCrashed	=	"System volume crashed"
RaidSystemVolumeDegrade	=	"System volume degraded"
RaidSystemVolumeSyncDone	=	"Consistency check on system completed"
RaidVolumeBadSector	=	"Storage pool volume has crashed"
RaidVolumeCrashed	=	"Volume crashed"
RaidVolumeDegrade	=	"Volume degraded"
RaidVolumeFull	=	"Volume full"
RaidVolumeSyncDone	=	"Consistency check completed"
RaidiScsiBadSector	=	"LUN of storage pool has failed"
RedundantPowerRecoveredProvide	=	"Redundant power supply recovered"
RedundantPowerStopProvide	=	"Redundant power supply failed"
S3RecoverCanceled	=	"Amazon S3 restoration canceled"
S3RecoverError	=	"Amazon S3 restoration failed"
S3RecoverFinished	=	"Amazon S3 restoration completed"
ShareSyncError	=	"Shared folder sync failed"
SmartTestEBoxErr	=	"S.M.A.R.T. test failure on expansion unit disk"
SmartTestESataErr	=	"S.M.A.R.T. test failure on eSATA disk"
SmartTestIntErr	=	"S.M.A.R.T. test failure on internal disk"
StoragePoolCrashed	=	"Storage pool crashed"
StoragePoolDegraded	=	"Storage pool degraded"
StoragePoolRaid5SpareChanged	=	"Storage pool (RAID 5 + Spare) degraded to RAID 5"
StoragePoolSyncDone	=	"Storage pool sync ended"
UPSConnected	=	"UPS connected"
UPSDisconnect	=	"UPS disconnected"
UPSOnAC	=	"UPS has returned to AC mode"
UPSOnBattery	=	"UPS has entered battery mode"
UPSPowerFail	=	"UPS low battery reached"
USBBKPCancelled	=	"Local backup canceled"
USBBKPDisconnect	=	"Local backup disk disconneted"
USBBKPError	=	"Local backup failed"
USBBKPFinished	=	"Local backup completed"
USBBKPNospace	=	"Local backup disk full"
USBBKPPartial	=	"Local backup partially completed"
USBDiskFail	=	"USB disk failed"
USBDiskFull	=	"USB disk full"
USBPartitionFull	=	"USB partition full"
USBPrinterNotSupport	=	"USB printers are not supported on this model."
UserWelcome	=	"Welcome new user"
VpncReconnectFail	=	"VPN Client redialling has failed"
external_nic_incompatible	=	"Error found between your network interface card ({0}) and %DISKSTATION%. Please contact <a target="_blank" href="https://account.synology.com/support/" target="_blank">Synology Technical Support</a>."

[oauth]
cancel	=	"Cancel"
connect_app_to_dsm	=	"Connect {0} to your _OSNAME_ account."
consent_notice	=	"By clicking 'Continue', you agree to allow {0} to use your information in accordance with their Terms of Service and Privacy Policy."
continue	=	"Continue"
redirect_page_permission	=	"%s has been successfully authenticated by %s. The important information will be redirected to enable the service. Please make sure the IP address of your system is %s."
request_permission_intro	=	"{0} would like to:"

[office]
feasibility_delete_volume	=	"This volume is used by Office. Before deleting this volume, please move the data in Office to another volume or uninstall Office."

[oob]
oob_account	=	"Account"
oob_autoblock_clear_btn	=	"Clear All"
oob_autoblock_clear_button_label	=	"Block List"
oob_autoblock_desc	=	"Block IP addresses with 10 failed login attempts within 5 minutes."
oob_autoblock_ip	=	"IP Address"
oob_autoblock_subtitle	=	"Auto Block"
oob_autoblock_time	=	"Time"
oob_block_clear_notice	=	"Are you sure you want to unblock all the IP addresses?"
oob_block_list_title	=	"Block List"
oob_cancel	=	"Cancel"
oob_confirm_clear_all	=	"Clear"
oob_confirm_reset	=	"Reset"
oob_desc	=	"Out-of-band management allows you to remotely execute basic hardware operations, such as starting up, restarting, and shutting down Synology NAS, by SSH clients. You can also monitor your system remotely or view the system logs."
oob_dhcp_disable_confirm	=	"Selecting the <b>Get network configuration automatically (DHCP)</b> option will disable out-of-band management. Are you sure you want to continue?"
oob_edit	=	"Edit"
oob_edit_account_title	=	"Edit Account"
oob_edit_link	=	"Edit"
oob_edit_network_interface_btn	=	"Go to 'Network Interface'"
oob_edit_network_interface_notice	=	"Go to 'Network Interface' to edit settings. Are you sure you want to leave?"
oob_enable_checkbox_desc	=	"Enable out-of-band management"
oob_enable_tip	=	"Enabling out-of-band management requires a static IP address."
oob_error_noname	=	"Please enter a username."
oob_error_repeat_password	=	"Inconsistent password. Please enter it again."
oob_ip_address	=	"IP address"
oob_lan_display_name	=	"LAN Management (Out-of-band)"
oob_lan_display_name_abbrv	=	"LAN mgmt"
oob_link_aggregation_not_support_note	=	"LAN ports for specific functions (e.g., out-of-band management) are not available for Link Aggregation and will not be listed here."
oob_network_interface_label	=	"Network interface"
oob_network_settings_desc	=	"Configure the port for out-of-band management"
oob_network_settings_subtitle	=	"Network Settings"
oob_ovs_not_support_note	=	"Open vSwitch is not available on LAN ports for specific functions (e.g., out-of-band management)."
oob_port	=	"Port"
oob_reset_button_label	=	"Reset"
oob_reset_desc	=	"You can reset the above configurations to factory settings. Account information, network settings, and system logs stored by out-of-band management will be permanently deleted."
oob_reset_operation	=	"Factory Reset"
oob_reset_operation_desc	=	"All the out-of-band management configurations, including account settings, network settings, auto block list, and logs will be cleared."
oob_reset_title	=	"Reset Out-of-Band Management Settings"
oob_save	=	"Save"
oob_setup_account_desc	=	"Create an account dedicated to the out-of-band management console."
oob_setup_account_title	=	"Create Account"
oob_setup_confirmpassword	=	"Confirm password"
oob_setup_password	=	"Password"
oob_setup_username	=	"Username"
oob_tab_label	=	"Out-of-Band Management"

[otp_enforcement]
enforce_mail_notification_service	=	"The email notification service is not enabled. Please enable and set up the email notification service first."
enforce_option_desc	=	"Enforce 2-factor authentication for the following users"
enforce_otp	=	"Enforce 2-factor authentication"
finish_step_desc	=	"2-factor authentication setup is complete. The next time you sign in to _OSNAME_, you will be prompted to enter a verification code generated by the authenticator app on your mobile device."
finish_step_desc_ldap	=	"2-factor authentication setup is complete. The next time you sign in to _OSNAME_, you will be prompted to enter a verification code generated by the authenticator app on your mobile device.<br><br>2-factor authentication affects the sign in of some mobile apps. To avoid any difficulties, make sure you have installed the latest version of all Synology apps.<br><br>If you lose your mobile device, an 8-digit emergency verification code will be sent to the mailbox below. To set up or change your email address, please contact the LDAP administrator for assistance."
note_set_up_otp	=	"You can set up 2-factor authentication for your account in {0}."
query_setting_otp_desc	=	"Do you want to set up your 2-factor authentication now or the next time you sign in to _OSNAME_?"
query_setting_otp_later	=	"Set up Later"
query_setting_otp_now	=	"Set up Now"
specific_usrgrp	=	"Specific users or groups"
specific_usrgrp_title	=	"2-Factor Authentication Settings"
type_enforced	=	"Enforced"
type_unenforced	=	"Not enforced"
wizard_err_get_key	=	"Having issues getting the secret key or QR code? Please contact Synology Technical Support."
wizard_err_set_mail	=	"Unable to configure the backup email. Please contact your system administrator for assistance."
wizard_header	=	"2-Factor Authentication Wizard"
wizard_install_step_desc	=	"Please install Synology Secure SignIn or Google Authenticator on your mobile device."
wizard_install_step_syno_authenticator	=	"Download Synology Secure SignIn"
wizard_install_step_title	=	"Install authenticator app"
wizard_mail_step_desc	=	"Please set up a backup email. If you lose your mobile device, an emergency verification code will be sent to the mailbox below."
wizard_mail_step_title	=	"Set up backup email"
wizard_verify_step_title	=	"Scan the QR code to receive a verification code on your mobile device"
wizard_welcome_step_desc	=	"To strengthen account security and protect your _OSNAME_ account, the administrator has made 2-factor authentication mandatory.<br><br>Once you have set it up, you will enter your password along with a verification code to sign in to _OSNAME_ or mobile apps. You can receive a verification code even when your mobile device is offline.<br><br>{0}Note: {1}To avoid any difficulties, make sure you have installed the latest version of all Synology apps."
wizard_welcome_step_title	=	"2-factor authentication is mandatory"

[otp_wizard]
otp_scan_qrcode_desc	=	"Scan the QR code on the left to open and configure your authenticator app."

[ovs]
ovs_disable	=	"disable"
ovs_enable	=	"enable"
ovs_linkaggr_change_mode	=	"Change your Link Aggregation mode when {0} Open vSwitch"
ovs_linkaggr_change_mode_disable	=	"Change your Link Aggregation mode to disable Open vSwitch"
ovs_linkaggr_change_mode_empty	=	"Link Aggregation Mode must be selected for all interfaces."
ovs_linkaggr_change_mode_enable	=	"Change your Link Aggregation mode to enable Open vSwitch"
ovs_linkaggr_mode_failover	=	"Active/Backup Mode"
ovs_linkaggr_mode_slb	=	"Balance-SLB"
ovs_linkaggr_mode_tcp	=	"Balance-TCP"
ovs_linkaggr_note	=	"To change the mode to {0}, you need to enable Dynamic Link Aggregation (IEEE 802.3ad LACP) on your switch first."
ovs_linkaggr_tip_failover	=	"Provides fault tolerance only."
ovs_linkaggr_tip_slb	=	"Does not require any specific network-switch support and is able to connect two different switches."
ovs_linkaggr_tip_tcp	=	"Used to connect switches configured as Dynamic Link Aggregation (IEEE 802.3ad LACP)."
ovs_not_support_bonding	=	"{0} is not supported when any bond exists. Please remove the bond and try again."
ovs_not_support_bridge	=	"{0} is not supported in Wireless AP mode. Please change to other modes and try again."
ovs_not_support_vlan	=	"{0} is not supported if any interface has VLAN tagging enabled. Please remove the VLAN tagging and try again."
ovs_setting	=	"Open vSwitch Settings"
ovs_test	=	"Open vSwitch Settings"

[passwd]
alert_disable_passwd_strength	=	"Please note that disabling "Apply password strength rules" allows passwords to be set as blank. For security reasons, we strongly recommend keeping this option enabled."
enable_pwd_expire	=	"Enable password expiration"
exclude_common_password	=	"Exclude common password"
exclude_username	=	"Exclude name and description of user from password"
expire_change_pwd	=	"Allow users to change password after expiration"
expire_notification	=	"Send expiration notification emails"
expire_warning	=	"Prompt users to change password upon login before expiration (days)"
forget_pass_enable	=	"Allow non-administrator users to reset forgotten passwords via email"
included_numeric_char	=	"Include numeric characters"
included_special_char	=	"Include special characters"
invalid_expire_general_rule	=	"The value cannot be greater than or equal to the maximum password valid duration."
invalid_history_rule	=	"Both [Password history] and [Minimum password valid duration] must be ticked or unticked."
invalid_rule	=	"You need to tick one password strength rule at least."
min_length_default	=	"{0} is the default username. The minimal password length is {1} characters."
min_length_enable	=	"Minimal password length"
mixed_case	=	"Include mixed case"
mustchange_after_reset	=	"Force password change after the administrator resets user password"
need_longer_password	=	"Use a longer password"
notify_day_greater_than_maxage	=	"The value cannot be greater than the maximum password valid duration."
notify_day_smaller_than_minage	=	"The value cannot be less than the minimum password valid duration."
notify_frequency	=	"Days before the expiration"
notify_frequency_tip	=	"You can enter multiple days by separating them with commas."
notify_time	=	"Send at"
passwd_expired	=	"Password expired. Set a strong new password."
passwd_gen_title	=	"Generate Random Password"
passwd_generator	=	"Password generator"
passwd_strength_desc	=	"Please refer to {0}this article{1} for more information on how to enhance password strength."
passwd_strength_enforce	=	"Apply password strength rules"
passwd_strength_title	=	"Password Settings"
passwd_strength_warn	=	"Password strength requirement:"
passwd_stronger	=	"Set a stronger password"
possible_reasons_are	=	"Possible password rules are as follows: {0}"
pwd_expire	=	"Password Expiration"
pwd_history	=	"Password history (times)"
pwd_maxage	=	"Maximum password valid duration (days)"
pwd_minage	=	"Minimum password valid duration (days)"

[perm_report]
export_folder_perm_title	=	"Select folders to export permissions"
export_progress_desc	=	"Exporting {0} reports."
export_report_title	=	"Export Permissions Report"
exporting_desc	=	"Scanning files. The actual time required depends on the number of files and permissions. Please wait."
fail_reason_get_user_group_fail	=	"Invalid user or group information"
fail_reason_invalid_path	=	"Invalid folder path"
fail_reason_no_enough_space	=	"Insufficient volume size"
save_path_placeholder	=	"Please select a shared folder"
save_to	=	"Save to"
select_destination_btn	=	"Select"
tray_export_progress	=	"Exporting: {0} reports"
tray_starting_time	=	"Started at: {0}"

[personal_settings]
2fa_desc	=	"Add an extra layer of security to your DSM account with 2-factor authentication."
about	=	"About"
about_desc	=	"_OSNAME_ is the dedicated operating system for Synology products, developed and owned by <a href="http://www.synology.com" target="_blank">Synology Inc.</a> _OSNAME_ brings comprehensive storage solutions, flexible backup strategies, smarter multimedia management (and much more!) to your fingertips."
account_info	=	"Account info"
account_info_signin_method	=	"Account Info & Sign-in Method"
advance_signin_2fa_desc	=	"Protect your account by adding a second identity verification step. You can use Approve sign-in (Synology Secure SignIn app only), a one-time password (OTP), or a hardware security key."
advance_signin_desc	=	"You can use a variety of methods to enhance the account sign-in experience and strengthen your account security. Start by choosing an option below:"
align_bottom	=	"Align bottom"
align_center	=	"Align center"
align_left	=	"Align left"
align_right	=	"Align right"
align_top	=	"Align top"
amfa_email_internal_error	=	"Unable to perform this operation, possibly because the network connection is unstable or the system is busy. (Error code: {0})"
amfa_email_network_error	=	"Unable to perform this operation. Check your network settings and try again later. (Error code: {0})"
amfa_email_send_mail_error	=	"Mail delivery failed. Check your email address or use another one. (Error code: {0})"
approve_sign_in_desc	=	"One tap sign-in via Synology Secure SignIn mobile app."
approve_sign_in_title	=	"Approve sign-in"
background_alignment	=	"Background alignment"
background_color	=	"Background color"
background_repeat	=	"Background repeat"
basic_info	=	"Basic Info"
change_password	=	"Change Password"
classical_desktop	=	"Desktop icon size"
clear_login_token	=	"Clear Login Token"
clear_login_token_confirm	=	"Are you sure you want to clear this login token?"
color	=	"Color"
confirm_ldap_mail_change	=	"This email address will be synced to the LDAP server. Are you sure you want to continue?"
confirm_revoke_device_amfa_desc	=	"The device will not be able to receive verification requests when you kill the connection. As such, the device will no longer be protected by Adaptive MFA. Are you sure you want to continue?"
confirm_revoke_device_trust_desc	=	"The status on this trusted device will be revoked. You will be required to go through 2-factor authentication at your next sign-in. Are you sure you want to continue?"
current_login_history	=	"Login History"
current_login_status	=	"Account Activity"
customize_background	=	"Customize background"
customize_color	=	"Customize color"
customize_image	=	"Customize image"
customize_wallpaper	=	"Customize wallpaper"
date_and_time	=	"Date & Time Format"
date_format	=	"Date format"
desktop	=	"Desktop"
desktop_color	=	"Background color"
desktop_setting_changed	=	"Desktop settings have been changed."
desktop_style_classical	=	"Classic (48x48)"
desktop_style_normal	=	"Normal (64x64)"
desktop_wallpaper	=	"Desktop wallpaper"
disable_accessibility	=	"Disable accessibility (no auditory cues available)"
disable_logout_confirm	=	"Do not show confirmation dialog when leaving _OSNAME_"
disable_two_step_desc	=	"Turning off 2-factor authentication will remove the extra security on your account."
disable_two_step_title	=	"Turn off 2-factor Authentication?"
display_preferences	=	"Display Preferences"
download_secure_signin	=	"Download Secure SignIn"
empty_desc	=	"Add email accounts to send files from File Station as attachments. You can use these email accounts to send event invitations via Synology Calendar as well as email notifications when sharing files with others via Synology Drive."
enable_2fa_check_desc	=	"After entering your account, follow the steps below to sign in."
enable_2fa_check_step_1	=	"• Step 1: Enter your password"
enable_2fa_check_step_2	=	"• Step 2: Use Synology Secure SignIn, hardware security key, or a third-party authentication app to sign in"
enable_2fa_uncheck_desc	=	"After entering your password, you will need to use Synology Secure SignIn, a third-party authentication app, or a hardware security key as the second verification step."
enable_pilot_view	=	"Enable the Pilot View button on taskbar"
enable_taskbar_thumbnail	=	"Enable instant preview on taskbar"
enable_widget	=	"Enable widgets"
enable_widget_on_top	=	"Keep the widget panel on top"
enter_password_to_continue	=	"Please enter the password of your DSM account to continue."
error_convert_failed	=	"Failed to convert the background image correctly."
extra_info	=	"Extra Info"
failed_to_set_ldap_otp_mail	=	"Unable to change the backup email. Please contact the system administrator of LDAP server to update settings."
geoip_lookup_failed	=	"GeoIP lookup failed"
hardware_security_key_desc	=	"Sign in using a USB key, Windows Hello, or Touch ID from your computer."
hardware_security_key_title	=	"Hardware security key"
identity_verification_content	=	"To ensure your account security, we need to verify your identity. Please enter the password of your _OSNAME_ account to continue."
identity_verification_title	=	"Verify Your Identity"
ignore_private_ip	=	"Ignored (Private IP)"
image	=	"Image"
image_is_too_big	=	"The file size cannot exceed {0}."
info_is_trusted	=	"Trusted"
info_is_unavailable	=	"Not recorded"
info_is_untrusted	=	"Untrusted"
keep_show_desktop_state	=	"Enable the "Show Desktop" button to display another transition effects as windows open and close"
kick_connection_confirm	=	"Do you want to move to "Connected Users" to kill related connections?"
lang_changed	=	"Display language has been changed."
launchbox_hide	=	"Do not expand the Main Menu after login"
ldap_change_password_desc	=	"Click Edit to change the password as needed. You can also add extra protection with 2-factor authentication."
login_browser	=	"Browser"
login_first_time	=	"First Login"
login_history_inspect	=	"View Login History"
login_info_is_untrusted	=	"This login has been set to untrusted. All related connections have been terminated."
login_ip_address	=	"IP Address"
login_operating_system	=	"Operating System"
login_place	=	"Location"
login_protocol	=	"Protocol"
login_token	=	"Trust Status"
login_token_is_cleared	=	"Login token has been cleared"
login_token_is_not_stored	=	"Not stored"
login_token_is_stored	=	"Stored"
login_token_is_unavailable	=	"Not recorded"
login_token_status	=	"Login Token Status"
login_username	=	"Username"
manage_login_token	=	"Manage Login Token"
manage_trust_device	=	"Manage Trusted Devices"
manage_trust_info	=	"Manage Trust Info"
menu_style	=	"Main menu style"
menu_style_dropdown	=	"Drop-down"
menu_style_fullscreen	=	"Fullscreen"
notify_wallpaper_missing	=	"The wallpaper image is missing. Please choose another one."
old_password	=	"Original Password"
other_signin_methods_desc	=	"After entering your account, use the following methods to sign in without password."
other_signin_methods_title	=	"Alternative sign-in methods"
otp_account_name	=	"Account"
otp_auth_failed	=	"Code authentication failed. Please make sure the verification code you entered is correct or try synchronizing the system time of your mobile device and _OSNAME_. Refer to <a class="link-font" target="_blank" href="https://kb.synology.com/DSM/tutorial/how_to_sync_time_between_mobile_NTP">this article</a> for details."
otp_auth_field	=	"6-digit verification code"
otp_auth_step_desc	=	"Enter a verification code generated by your authenticator app to make sure configurations are correct."
otp_auth_step_title	=	"Confirm your 2-factor authentication settings"
otp_desc	=	"2-factor authentication sends a one-time code to your mobile device when you sign in. This adds an extra layer of protection to safeguard your account even if your password has been compromised."
otp_edit_desc	=	"Enter the following account name and secret key into your authenticator app."
otp_email_step_desc_ldap	=	"The email address down below can help you acquire the 8-digit emergency verification code when your mobile device is lost. Please click {0} to update your LDAP email settings."
otp_enable_desc	=	"Enable 2-factor authentication"
otp_enter_manually_link	=	"You can also enter your secret key manually."
otp_err_auth_code	=	"Verification codes must include six digits."
otp_err_disable_failed	=	"Failed to disable 2-factor authentication."
otp_err_email_required	=	"An email address is required."
otp_finish_step_desc	=	"2-factor authentication setup is complete. The next time you sign in to _OSNAME_, you will be prompted to enter a verification code generated by the authenticator app on your mobile device. <br><br>2-factor authentication affects signing in with some mobile apps. To avoid any difficulties, make sure you have installed the latest version of any mobile app that requires signing in to _OSNAME_."
otp_finish_step_title	=	"2-factor authentication has been enabled for your account"
otp_install_app_desc	=	"Please install an authenticator app on your mobile device. If you have not installed one yet, _OSNAME_ supports the following authenticator apps: {0}."
otp_mail_step_desc	=	"Please enter an email address. If your mobile device is lost, an emergency verification code can be sent to the email address provided here."
otp_mail_step_desc_ldap	=	"If your mobile device is lost, find the 8-digit emergency verification code at the email address below. To set/change your email address, please contact the LDAP administrator for assistance."
otp_mail_step_title	=	"Confirm your email address"
otp_qrcode_step_title	=	"Install and configure authenticator app"
otp_save_config_failed	=	"Unable to save settings."
otp_scan_qrcode_desc	=	"Open and configure your authenticator app by scanning the QR code below. {0}"
otp_secret_key	=	"Secret key"
otp_settings	=	"2-Factor Authentication"
otp_support_apps_link	=	"Google Authenticator (Android and iOS)"
otp_verification_code	=	"Verification code (OTP)"
otp_welcome_step_desc	=	"2-factor authentication provides an extra layer of protection for your _OSNAME_ account. Once this feature has been setup, you will need a one-time verification code in addition to your password in order to sign in to _OSNAME_. Please note, you will need a mobile device to generate verification codes."
otp_welcome_step_title	=	"Welcome to the 2-Factor Authentication Setup Wizard"
otp_wizard_change_email	=	"Change email"
otp_wizard_change_email_desc	=	"Please fill in the below fields to change your email address"
otp_wizard_confirm_code_desc	=	"Please enter the 6-digit code shown in the app."
otp_wizard_confirm_code_title	=	"2. Enter the verification code (OTP)"
otp_wizard_finish_desc	=	"The setup for the 2-factor authentication is complete. From now on, you will be required to enter the code displayed in the verification app when you sign in to DSM."
otp_wizard_finish_tips	=	"Add your commonly used devices in <span class="bold-font">Personal</span> > <span class="bold-font">Account</span> > <span class="bold-font">2-Factor Authentication</span> > <span class="bold-font">Manage Trusted Devices</span> so these devices can skip the second step in the future."
otp_wizard_finish_title	=	"2-factor authentication has been enabled"
otp_wizard_getkey_desc	=	"To set up your mobile device for the 2-factor authentication, please follow these steps:<br><br><div>1. <b>Install the verification app</b><br>Please install the verification application on the mobile device. DSM supports Synology Secure SignIn and other 3rd party authentication apps for both Android and iOS devices.</div><br><div>2.<b>Enter the verification code</b><br>Use the verification app on the mobile device to scan the QR code below, or click {0}this link{1} to get the key and manually enter it into the app.</div>"
otp_wizard_getkey_title	=	"Set up your mobile device to receive the verification code"
otp_wizard_install_app	=	"Install Synology Secure SignIn"
otp_wizard_install_app_desc	=	"Please install Synology Secure SignIn on your mobile device. You may also use third-party authentication apps."
otp_wizard_install_app_path	=	"Download Synology Secure SignIn:"
otp_wizard_mail_desc	=	"Before setting up 2-factor authentication, please set up a backup email. If you lose your mobile device, an emergency verification code will be sent to the following mailbox."
otp_wizard_mail_title	=	"Backup email settings"
otp_wizard_new_email	=	"New email"
otp_wizard_rescue_mail	=	"Backup email"
otp_wizard_scan_qrcode	=	"1. Scan the QR code"
otp_wizard_scan_qrcode_failed	=	"Can't scan it?"
otp_wizard_scan_qrcode_with_app	=	"Use the camera in the app to scan the QR code below."
otp_wizard_setup_authenticator	=	"Set up Secure SignIn to receive verification code (OTP)"
otp_wizard_title	=	"2-Factor Authentication Wizard"
otp_wizard_welcome_desc	=	"2-factor authentication requires you to enter your password along with a verification code (OTP) when signing in to _DISKSTATION_. You can receive an OTP code even if your mobile device is offline."
otp_wizard_welcome_note	=	"Enabling 2-factor authentication applies to Synology package logins. {0}Learn more{1}"
otp_wizard_welcome_title	=	"Protect your _OSNAME_ account with 2-factor authentication"
password_last_changed	=	"Last changed"
password_signin_method	=	"Password & Sign-in Method"
passwordless_signin	=	"Passwordless Sign-In"
passwordless_signin_desc	=	"Use the Synology Secure SignIn app or a hardware security key to sign in without entering the password. Signing in with the password will still be available as an option."
preference_delete_feasibility_check	=	"This action may remove user settings. To improve future login success, notify users to disable two-factor authentication beforehand. If users are unable to sign in afterward, their accounts will need to be reconfigured."
preference_offline_feasibility_check	=	"This action may remove user settings. To improve future login success, notify users to disable two-factor authentication beforehand. If users are unable to sign in afterward, their accounts will need to be reconfigured."
private_ip	=	"Private IP"
protect_password_desc	=	"Your password protects your account. You can also add extra protection with 2-factor authentication."
refresh_confirm	=	"The settings will be applied after refreshing the web page. All running applications will be closed. Do you want to refresh the page now?"
remember_window_state	=	"Resume _OSNAME_ to my previous logout status when signed in"
repeat_horizontal	=	"Horizontal repeat "
repeat_vertical	=	"Vertical repeat"
reset_current_device	=	"Reset Current Device"
reset_otp	=	"Add New Device"
reset_two_step_desc	=	"After you finish the reset process, you will no longer be able to use the current verification code (OTP) in your mobile devices to sign in."
resize_image	=	"Scale to fit"
second_step_title	=	"Your second step"
secure_signin_not_install	=	"Service unavailable. Please make sure Secure SignIn Service is correctly installed first."
security_advisor_abnormal_login_warning	=	"Abnormal login detection in Security Advisor is not enabled. New logins will not be trusted and no notification email will be sent."
select_image	=	"Select image"
set	=	"Configured"
set_login_untrusted	=	"Set to Untrusted"
set_login_untrusted_confirm	=	"Do you want to set this login to untrusted and terminate all the current connections with this IP?"
setup	=	"Set Up"
sign_in_method	=	"Sign-in Method"
terms_and_conditions	=	"<a href="https://kb.synology.com/_OSNAME_/help/_OSNAME_/Home/legal_info" target="_blank">Terms and Conditions</a>"
text_color	=	"Text color"
time_format	=	"Time format"
trust_info	=	"Trust Info"
trusted_devices	=	"Trusted devices"
trusted_devices_desc	=	"You can skip the second step on devices you trust, such as your own computer."
untrust_client_desc	=	"User can’t log in by any untrusted clients, and need to ask administrator to cancel locked status."
upload_image	=	"Local computer"
user_agent	=	"User Agent"
user_quota_capacity	=	"User Quota"
verification_code_desc	=	"Use Synology Secure SignIn mobile app to get a verification code, even when your device is offline."
warn_otp_with_ssh	=	"Important: Once you enable 2-step verification, you will have to pass 2-step verification when you sign in to SSH-related services, such as SSH terminal, SFTP, and rsync with SSH transfer encryption. However, since Hyper Backup and Shared Folder Sync via rsync with SSH transfer encryption do not support 2-step verification, these two services will not be able to work normally after 2-step verification is enabled. Are you sure you want to continue?"
watch_current_login_status	=	"View your account activity, including current connections, trusted devices, and login history."
wizard_install_authenticator_app	=	"Install an authenticator app"

[personal_updater]
desc	=	"This will only take a few seconds. Please wait."
desc_when_delay	=	"The update is being processed. This may take some time. Please wait."
title	=	"Update your data and settings..."

[petaspace]
pkg_delete_warning_data_exist	=	"You cannot remove this package because PetaSpace is running on this _DISKSTATION_. Please remove all data from PetaSpace to proceed."
volume_delete_brick_exist	=	"You cannot remove this volume because this volume is being used by PetaSpace. Please remove this volume from PetaSpace to proceed."

[photo_viewer]
admin_no_codec_pack	=	"Please go to {0} and install the codec pack to display image files in High Efficiency Image Container (HEIC) format."
admin_no_install_ame	=	"Please go to Package Center to install {0}, open the package, and sign in to your Synology Account to install the codec pack."
admin_no_license	=	"Please go to {0}, sign in to your Synology Account, and install the codec pack to display image files in High Efficiency Image Container (HEIC) format."
confirm_delete	=	"Are you sure you want to delete this photo?"
hd_mode	=	"View in original size"
img_codec_common_advice	=	"To view your images, convert them to supported formats, such as JPG. {0}Learn more{1}"
menu_preview	=	"Preview"
no_codec_pack	=	"Please contact your administrator to go to Package Center and install the codec pack to display image files in High Efficiency Image Container (HEIC) format."
no_data	=	"No Data"
no_install_ame	=	"Please contact your administrator to go to Package Center, install Advanced Media Extensions, open the package, and sign in to their Synology Account to install the codec pack."
no_license	=	"Please contact your administrator to go to Package Center, sign in to their Synology Account, and install the codec pack to display image files in High Efficiency Image Container (HEIC) format."
no_preview	=	"No preview available"
no_thumbnail	=	"Unable to display image because it may be corrupted."
slideshow_fade	=	"Dissolve"
slideshow_motion	=	"Pan and zoom"
title	=	"Photo Viewer"
tooltip_info	=	"Image information"
tooltip_next	=	"Next"
tooltip_prev	=	"Previous"
tooltip_rotate_left	=	"Rotate left"
tooltip_rotate_right	=	"Rotate right"
tooltip_slideshow	=	"Slideshow"
tooltip_wallpaper	=	"Set as wallpaper"

[photowizard]
apply_right_msg	=	"Assigning privileges."
apply_share_msg	=	"Creating the "photo" shared folder."
apply_startserv_msg	=	"Enabling Photo Station 5"
final_descr	=	"Visit {0} to see your photo albums.<p>To learn more about how to use Photo Station, click {1}.</p>"
finalstep_title	=	"Finished"
long_descr	=	"Create online photo albums and blog"
short_descr	=	"Photo Station"
welcome	=	"The wizard will help you do the following:<p><ul><li>Create the <b>photo</b> shared folder.</li><li>Apply Read/Write privileges to admin.</li><li>Enable Photo Station.</li></ul></p>"
welcome_title	=	"Welcome to the Photo Station Wizard"
wizard_title	=	"Photo Station Wizard"

[pixlr]
openeditmenu	=	"Edit in {0}"
save_err	=	"Fail to save the image to your _DISKSTATION_. Please download it directly via the following URL: {0}."
save_image	=	"The new image "{0}" is saved."

[pkg_detail_status]
installing	=	"Installing..."
repairing	=	"Repairing..."
starting	=	"Starting..."
stopping	=	"Stopping..."
uninstalling	=	"Uninstalling..."
upgrading	=	"Updating..."
waiting	=	"Waiting..."

[pkg_status]
doing	=	"{0} - [{2}] Click to go to {1} for details."
error	=	"{0} - [Error] Click to go to {1} to fix the issue."
stop	=	"{0} - [Stopped] Click to go to {1} to enable this package."

[pkgmgr]
additional_payment_method	=	"Enable additional payment methods"
allow_pkg_publisher	=	"Allow installation of packages published by:"
applied_pkgs	=	"Applied to: {0}"
auto_install	=	"_OSNAME_ will auto-install {0}. Please install {1} later."
auto_update	=	"Auto-update"
auto_update_all_packages	=	"Auto-update all packages to the latest versions"
auto_update_all_version	=	"All Versions"
auto_update_desc	=	"Select the update policy for packages. Please note that some packages do not support auto-updating."
auto_update_enable	=	"Update packages automatically"
auto_update_important_packages	=	"Auto-update all packages to important versions"
auto_update_important_tip	=	"Update all packages to versions with critical bugs or security vulnerabilities fixed"
auto_update_important_version	=	"Important Versions"
auto_update_non_support	=	"{0} does not support auto updates. Please go to Package Center to update the package."
auto_update_note	=	"Note: Grayed-out packages do not support auto updates."
auto_update_note_desc	=	"Some packages do not support auto-updating."
auto_update_one	=	"Auto-update"
auto_update_some_packages	=	"Customize package update policy"
available_packages	=	"Available"
be_default_vol	=	"Always install new packages on this volume in the future"
beta	=	"Beta"
beta_package_note	=	"This option does not uninstall or hide the installed Beta packages."
brick	=	"Cluster Volume"
broken_by_pkg_desc	=	"This application is stopped as incompatible with {0} or its current version."
broken_desc	=	"Please re-install the package because something went wrong."
broken_package	=	"The package file is corrupt. Please download it again or contact the package developer."
broken_version_desc	=	"Please repair the package because the version installed is incompatible with your _OSNAME_."
broken_version_update_to_beta_desc	=	"Please go to <b>Beta Packages</b> on the left panel to repair the package by joining the beta program."
broken_version_wo_update_desc	=	"The package version installed is incompatible with your _OSNAME_."
buildin_desc	=	"The features of this package have been built-in so you can uninstall it."
busy_alert	=	"Package Center is busy. Please try again later."
categories	=	"Categories"
category	=	"Category"
class_all	=	"All Packages"
class_backup	=	"Backup"
class_beta	=	"Beta Packages"
class_business	=	"Business"
class_community	=	"Community"
class_dev	=	"Developer Tools"
class_multimedia	=	"Multimedia"
class_productivity	=	"Productivity"
class_security	=	"Security"
class_utilities	=	"Utilities"
close_updateall_confirm	=	"All packages will stop updating if you exit Package Center. Are you sure you want to continue?"
codesign_db_corrupted	=	"Certificate database is corrupted and has been reset to the default state. Please re-import your certificates."
commfail	=	"Connection failed. Please check your network and time settings, or refer to this <a href="http://sy.to/pkgctconnectoin" target="_blank">article</a> for further information."
complete_before_proceed	=	"Some packages are busy with ongoing operations. Check the following packages and their settings: <span class="bold-font">{0}</span>."
confirm_3rdparty_package_installation	=	"The package is provided by third-party developers and not verified by Synology. By clicking Agree, you acknowledge that you are solely responsible for any damages to your device or data loss that may result from using the package."
confirm_install_runpackage	=	"Do you want to run this package after installation?"
conflict_packages	=	"The package conflicts with {0}. Please uninstall {0} before installing this package."
contact_developer	=	"Please contact the package developer."
contact_developer_or_try_again	=	"Please try again later or contact the package developer."
contact_support	=	"Unable to perform this operation. Please try again later."
contact_support_or_try_again	=	"Unable to perform this operation. Please try again later."
contributor_packages	=	"Contributor"
contributor_packages_notice	=	"Packages in this section are contributed and maintained by third-party developers. For any suggestions or technical assistance, please contact the developers directly."
csp_need_refresh	=	"Security enhancements for the newly installed package will be better supported after you refresh the webpage. Would you like to refresh the webpage now?"
customized	=	"Customized"
customized_autoupgrade_setting_not_select_alert	=	"Please select at least one package."
customized_setting	=	"Customized Settings"
default_setting	=	"Default Settings"
default_vol	=	"Default Volume"
default_vol_desc	=	"New packages will be installed on the volume specified below."
dep_start_failed	=	"{0} failed to run. The following dependent packages will be stopped: {1}."
depend_cycle	=	"A package conflict occurred. Please contact the developer of this package."
depend_packages	=	"Please install the following package(s) before installing this package: {0}"
depend_uninst_unstart	=	"Please install and run the following package(s) before installing this package: {0}"
depend_unstart	=	"Please run the following package(s) before installing this package: {0}"
dependee_packages	=	"Dependent Packages"
desktop_notification	=	"Enable desktop notification"
disable_auto_update	=	"Manually update all packages"
disable_autoupdate	=	"Disable auto-update"
disable_autoupdate_desc	=	"For the latest features and security updates, select either <b>All versions</b> or <b>Important versions</b>."
disable_autoupdate_title	=	"Keep packages updated"
disable_trust_level	=	"Any publisher"
downgrade_version	=	"Current package version is {0}. You cannot roll back to the older version {1}."
download_count	=	"Download count"
download_fail	=	"Failed to download."
download_pkg_fail	=	"Failed to download "{0}"."
duplicate_certificate	=	"This certificate has already been imported."
duplicate_certificate_sys	=	"This certificate is already trusted by Synology Inc."
duplicate_feed	=	"The name or location is already in use."
empty_beta_pkg_list	=	"No available beta packages now"
empty_category_pkg_list	=	"No available packages now"
empty_pkg_list_due_to_beta	=	"No compatible packages<br>Your current _OSNAME_ is a beta version. Please go to Beta Packages to install the packages you want."
error_break_packages	=	"After installing {0}, "{1}" will be stopped."
error_no_volume	=	"You have not created any volumes. Do you want to launch Storage Manager to create a new volume?"
error_no_volume_and_storage_pool	=	"You have not created any storage pools and volumes. Do you want to launch Storage Manager to create a new storage pool and volume?"
error_occupied	=	"Another package is being configured, installed, or restored. Please try again later."
error_peta_volume_cannot_be_installed	=	"The package cannot be installed on a volume with the Btrfs (Peta Volume) file system. Do you want to launch Storage Manager to create a new volume?"
error_remove_syno_cert	=	"You cannot delete certificates issued by Synology Inc. or by community publishers currently listed in Package Sources."
error_remove_vol_dep_package	=	"{0} are installed on a volume you want to remove and in use by another package. Please uninstall the following package to continue: {1}."
error_remove_vol_dep_package_before_pool_deactivate	=	"The following package depends on {0} and must be uninstalled before the storage pool can be safely ejected: {1}"
error_remove_vol_dep_packages	=	"{0} are installed on a volume you want to remove and in use by other packages. Please uninstall the following packages to continue: {1}."
error_remove_vol_dep_packages_before_pool_deactivate	=	"The following packages depend on {0} and must be uninstalled before the storage pool can be safely ejected: {1}"
error_replace_packages	=	"After installing {0}, "{1}" will be replaced."
error_stop_dep_packages	=	"{0} depends on this package. If you want to stop it, please stop {0} beforehand."
error_sys_no_space	=	"The free space of system partition is insufficient. Please contact the Synology support team for help."
error_uninst_dep_packages	=	"{0} is dependent on this package. Please uninstall {0} first before uninstalling this package."
error_upgrade_dep_packages	=	"{0} is dependent on this package. Please stop or uninstall {0} first before updating this package."
error_upgrade_dep_packages_with_name	=	"{0} is dependent on {1}. Please stop or uninstall {0} first before updating this package."
error_upgrade_dep_statable_packages	=	"When updating {0}, "{1}" will be stopped."
error_verify_license	=	"Failed to verify the license."
explore_title	=	"Explore"
extra_available_packages	=	"Other Sources"
fail_connect_server	=	"Synology server is busy. Please try again later."
fail_connect_to_buy	=	"Failed to connect to Synology Account. Please check your network connection and try again later."
fail_op_acquire_resource	=	"Failed to get package resource."
fail_op_install_pkg	=	"Failed to install the package."
fail_op_upgrade_pkg	=	"Failed to update the package."
fail_start_dsm_version	=	"{0} failed to run on the current _OSNAME_ version. Please update the package to the latest version."
feed	=	"Location"
feed_server	=	"Package Sources"
filter_installed	=	"Hide installed packages"
force_replace_no_permission	=	"Unable to perform this operation. This update requires administrators to install {0} to replace {1}. Please contact your administrator to change the settings or perform this operation."
high_privilege_config_not_allowed	=	"Unable to install {0} because it runs with root privileges. Packages with root privileges might execute commands as the root user and compromise your system security. Please contact the package developer to change the privilege settings of the package."
import_cert_desc	=	"Please import a certificate you trust."
incompatible	=	"This package is incompatible with the current _OSNAME_ version."
incompatible_packages_repaired_after_os_upgrade	=	"The recent _OSNAME_ upgrade repaired the incompatibility of the following package: {0}"
incompatible_packages_repaired_after_os_upgrade_plural	=	"The recent _OSNAME_ upgrade repaired the incompatibility of the following packages: {0}"
install_check_alert	=	"Failed to install the package due to the following reasons:"
install_check_confirm	=	"Installing packages will cause abnormalities in the following functions. Do you want to continue?"
install_depended_pkgs	=	"When you install {1}, the following dependent packages will also be installed automatically: {0}. Do you want to continue?"
install_fail	=	"Failed to install."
install_no_permission_alert	=	"You are not authorized to install packages. Please contact your system administrator."
install_operation_desc	=	"Package Center will automatically perform the following operations when {0} is installed."
install_packages	=	"Installed"
install_pkg	=	"Install {0}"
install_pkg_completed	=	""{0}" has been successfully installed. Click "Run" under the "Installed" tab to activate the package service now. {1} {2}"
install_pkg_fail	=	"Failed to install "{0}". {1}"
install_runpackage	=	"Run after installation"
install_start_pkg_completed	=	""{0}" is successfully installed. {1} {2}"
install_start_success	=	"This package is installed and ready to use."
install_upgrade_title	=	"Manual Install"
install_version_less_than_limit	=	"The version of the package installed is {0}, which is not compatible with your _DISKSTATION_. Please update it to {1} or above."
installing	=	"Installing..."
invalid_feed	=	"Invalid location."
join_beta	=	"Join Beta"
join_beta_confirm	=	"You have installed a stable version of {0}.<br>Do you want to upgrade to the beta version now?"
key_algorithm	=	"Key Algorithm"
key_fingerprint	=	"Key Fingerprint"
key_length	=	"Key Length"
launch	=	"Launch"
license_accept	=	"I accept the terms of the license agreement."
license_desc_short	=	"Please read the following license agreement before continuing."
license_err_desc	=	"A license error has occurred. Please purchase the package again."
license_title	=	"License Agreement"
loading	=	"Getting status"
log_btn	=	"View Log"
log_title	=	"Log"
lun_has_worm_locked_snapshot	=	"The following LUNs contain immutable snapshots that cannot be deleted. Wait for the immutable snapshots to expire and try again: {0}."
missing_pkgs	=	"The following packages are missing in the package server. Please contact the Synology support team for help."
more_info	=	"More"
move_check_alert	=	"The system failed to move {0} to {1} due to the following reason(s): {2}"
move_fail	=	"{0} failed to be moved to {1}."
move_package	=	"Move to another volume"
move_packages_promt	=	"Move the following packages to {0}?"
move_success	=	"{0} was successfully moved to {1}."
moving	=	"Moving..."
msg_enable_beta_to_open_beta_pkg	=	"{0} is currently in a beta version. Please enable beta versions in Package Center > Settings > Beta to view detailed information on this package."
multi_packages	=	"Multiple Packages"
myds_alert_delete	=	"If you remove your Synology Account from _DISKSTATION_, packages you purchased will no longer work. Are you sure you want to continue?"
myds_connecting	=	"Connecting to Synology Account..."
myds_error_account	=	"Wrong Synology Account username or password."
myds_error_activate	=	"You have not activated your account yet. Please go to <a href="https://account.synology.com" target="_blank">Synology Account</a> to activate your account."
myds_error_illegal	=	"Unable to perform this operation. Please try again later."
myds_login_desc	=	"Your Synology Account is required in order to use comprehensive services for paid packages."
myds_login_title	=	"Synology Account Login"
myds_pay_buy	=	"Buy"
myds_pay_price	=	"Price"
myds_pay_trail	=	"Try"
myds_register	=	"Don't have a Synology Account yet?"
myds_remind_pass	=	"Forgot password?"
myds_setting_desc	=	"Please enter your Synology Account information below."
myds_title	=	"Synology Account"
myds_welcome	=	"Welcome to Synology Account!"
mysql_error_db_exist	=	"A database with the same name already exists."
mysql_error_db_name	=	"The database name format is invalid."
mysql_error_invalid_char	=	"The data you entered contains invalid characters."
mysql_error_root_password	=	"Incorrect database root password."
no_default_vol	=	"Always ask me"
non_available_packages	=	"All packages have been installed."
non_inst_packages	=	"You have not installed any packages."
non_upgradable_packages	=	"All packages are up-to-date."
noncancellable	=	"Oops, installation cannot be canceled now."
not_support_platform	=	"This package is not compatible with your _DISKSTATION_. Please install the appropriate package corresponding to your _DISKSTATION_."
notification_desc	=	"An email or desktop notification will be sent or displayed when updates are available."
open	=	"Open"
opensource	=	"Open Source"
operation_desc	=	"Package Center will automatically perform the following operations when all packages are updated."
other_information	=	"Other Information"
package_center_tos_updated	=	"We have updated our {0}Synology Package Center Terms of Services{1} to make it easier to understand and to reflect recent changes to our policy. We encourage you to read our Synology Package Center Terms of Services by clicking on the link above and regularly check for any changes."
payment_setting_desc	=	"Additional third-party <a href="https://www.synology.com/knowledgebase/DSM/tutorial/General/What_payment_methods_are_supported_by_Synology" target="_blank">payment processors</a> may be available in specific regions."
payment_setting_title	=	"Payment"
pgk_help_title	=	"Help & How-To"
pkg_become_builtin_desc	=	"{0} is now a built-in service in DSM. You can remove the original package by going to the package page and clicking <b>Uninstall</b>."
pkg_cannot_be_uninstalled_title	=	"Cannot uninstall this package"
pkg_email_custom_set_err	=	"Please enable the email notification service and use custom email server on the "Notification" page. Please click "OK" to complete the settings before continuing."
pkg_email_set_err	=	"You have not configured the notification settings in <b>Control Panel</b> > <b>Notification</b>. Please click <b>OK</b> to complete the settings before continuing."
pkg_given_operation_timeout	=	"The operation ({0}) has timed out."
pkg_incompatible	=	"{0} is incompatible with the current _OSNAME_ version."
pkg_install_version_less_than_limit	=	"The version currently installed on {0} is {1}, which is not compatible with your _DISKSTATION_. Please update {0} to {2} or above."
pkg_no_longer_support_desc	=	"The package is no longer supported. You can remove it by going to the package page and clicking <b>Uninstall</b>."
pkg_no_longer_support_status	=	"Not Supported"
pkg_occupy_share	=	"Some package data are stored in a shared folder you want to remove. Stop the following packages first: <span class="bold-font">{0}</span>."
pkg_open_no_permission_desc	=	"You don't have sufficient permissions to open this package. To check the details of your access permissions, go to Control Panel > Application Privileges."
pkg_volume_broken_desc	=	"Unable to run this package because of storage abnormalities. Please go to {0} for detailed information."
pkg_waiting_auto_repair_desc	=	"The package is waiting for auto repairing. You can click the <b>Repair</b> button if you want the package to be repaired first."
pkg_waiting_auto_repair_status	=	"Queueing..."
pkg_waiting_auto_update_desc	=	"The package is waiting for an auto-update. You can click the <b>Update</b> button if you want to update the package now."
pkgmgr_cert_expired	=	"This package's digital certificate has already expired."
pkgmgr_cold_storage	=	"Peta Volume"
pkgmgr_encrypted_volume	=	"Encrypted volume"
pkgmgr_encrypted_volume_warning	=	"You selected an encrypted volume. If the system cannot mount this volume when booting up, the packages installed on this volume may not be able to run. <a class="link-font" href="https://sy.to/encryptedvolkb" target="_blank">Learn more</a>"
pkgmgr_file_install_failed	=	"Failed to install the package."
pkgmgr_file_not_package	=	"Invalid file format."
pkgmgr_install_following_start	=	"The wizard will guide you through the steps to install a new package. Click Next to continue."
pkgmgr_installed_pkg_version	=	"Installed version"
pkgmgr_no_signature	=	"This package does not contain a digital signature."
pkgmgr_not_syno_publish	=	"This package is not published by Synology Inc."
pkgmgr_pkg_adminurl	=	"URL"
pkgmgr_pkg_autostart	=	"Autostart"
pkgmgr_pkg_broken	=	"Error"
pkgmgr_pkg_cannot_upgrade	=	"To update this application, please first uninstall the existing version."
pkgmgr_pkg_changelog	=	"What's new in version {0}"
pkgmgr_pkg_ckeckbox_autostart_tip	=	"Set this package in the autostart mode."
pkgmgr_pkg_description	=	"Description"
pkgmgr_pkg_detail	=	"Package Info"
pkgmgr_pkg_distributor	=	"Publisher"
pkgmgr_pkg_install	=	"Install"
pkgmgr_pkg_install_already	=	"This package has already been installed."
pkgmgr_pkg_install_already_pkgname	=	"{0} has already been installed."
pkgmgr_pkg_install_note	=	"Press this button to install a package."
pkgmgr_pkg_install_volume	=	"Installed volume"
pkgmgr_pkg_install_wizard_done	=	"This package has been successfully installed. You can click "Run" to activate the package service now."
pkgmgr_pkg_install_wizard_final_title	=	"Package installed"
pkgmgr_pkg_install_wizard_selectvol_title	=	"Select a destination volume to install the package"
pkgmgr_pkg_install_wizard_summary_desc	=	"The wizard will apply the following settings and start to install the package."
pkgmgr_pkg_install_wizard_summary_title	=	"Confirm settings"
pkgmgr_pkg_install_wizard_upload_title	=	"Upload a package"
pkgmgr_pkg_install_wizard_welcome_title	=	"Welcome to the Package Installation Wizard"
pkgmgr_pkg_maintainer	=	"Developer"
pkgmgr_pkg_manually_stopped	=	"Manually Stopped"
pkgmgr_pkg_name	=	"Package name"
pkgmgr_pkg_newest_online_version	=	"Newest online version"
pkgmgr_pkg_not_available	=	"Not available"
pkgmgr_pkg_not_support_platform	=	"This package is not supported on the platform of {0} or is incompatible with the current _OSNAME_ version."
pkgmgr_pkg_os_not_support	=	"The current system ({0}) is not the system required by this package.<br>Please install it on {1}."
pkgmgr_pkg_os_require_surveillance	=	"This is a Surveillance Station package. Please install it in Surveillance Station > Application Center."
pkgmgr_pkg_required_newer_pkgversion	=	"This package is outdated. Check <a href="http://www.synology.com">Synology Website</a> for the latest version."
pkgmgr_pkg_required_newer_version	=	"This package requires _OSNAME_ version {0} or onward."
pkgmgr_pkg_required_older_version	=	"This package requires _OSNAME_ {0} or older."
pkgmgr_pkg_running	=	"Running"
pkgmgr_pkg_setting	=	"Package Setting"
pkgmgr_pkg_start	=	"Run"
pkgmgr_pkg_start_failed	=	"Failed to run the package service."
pkgmgr_pkg_start_note	=	"Run the package service"
pkgmgr_pkg_start_success	=	"The package service has been activated and is ready for use."
pkgmgr_pkg_start_warn	=	"Are you sure you want to run this package service?"
pkgmgr_pkg_status	=	"Status"
pkgmgr_pkg_stop	=	"Stop"
pkgmgr_pkg_stop_failed	=	"Failed to stop the package service."
pkgmgr_pkg_stop_note	=	"Stop the package service"
pkgmgr_pkg_stop_success	=	"The package service has been stopped."
pkgmgr_pkg_stop_warn	=	"Are you sure you want to stop this package service?"
pkgmgr_pkg_stopped	=	"Stopped"
pkgmgr_pkg_uninstall	=	"Uninstall"
pkgmgr_pkg_uninstall_failed	=	"Failed to uninstall the package."
pkgmgr_pkg_uninstall_note	=	"Press this button to uninstall the package."
pkgmgr_pkg_uninstall_success	=	"The package has been successfully uninstalled."
pkgmgr_pkg_uninstall_warn	=	"Are you sure you want to uninstall this package?"
pkgmgr_pkg_update_available	=	"Update Available"
pkgmgr_pkg_upgrade	=	"Update"
pkgmgr_pkg_upgrade_wizard_done	=	"This package has been successfully updated. You can click "Run" to activate the package service now."
pkgmgr_pkg_upgrade_wizard_final_title	=	"Package updated"
pkgmgr_pkg_upgrade_wizard_summary_desc	=	"The wizard will apply the following settings and start updating the package."
pkgmgr_pkg_upgrade_wizard_welcome_title	=	"Welcome to the Package Update Wizard"
pkgmgr_pkg_upload_failed	=	"Failed to upload the package."
pkgmgr_pkg_version	=	"Newest online version"
pkgmgr_space_not_ready	=	"The installed volume is not ready."
pkgmgr_unknown_publisher	=	"This package is published by an unknown publisher."
pkgmgr_upgrade_following_start	=	"The wizard will guide you through the steps to update the existing package. Click "Next" to continue."
pkgmgr_upgrade_noti_link	=	"Click here to launch Package Center and update the package(s)."
pkgmgr_worker_violation	=	"The package uses the {0}resource{1} exclusively for Synology packages. Please contact the package developer to modify the settings."
platform_start_failed	=	"{0} is incompatible with the current _OSNAME_ version. Please update the package to the latest version."
port_conflict	=	"Port {0} configured for this package is either used by another service or reserved for system use. Please disable or modify the conflicting service, or contact the developer to modify the package configuration."
prerelease_accept	=	"I have read and agree to the Pre-Release Agreement"
prerelease_agreement	=	"Pre-Release Agreement"
prerelease_agreement_brief	=	"Beta versions allow you to try out brand new Synology package features before their official releases. Before trying them, please read and agree to the Pre-release Agreement."
prerelease_agreement_content	=	"<h1 id="pre-release-program-agreement">Pre-Release Program Agreement</h1><p>Last updated: Sep. 8, 2020</p><p><em>This translation is for informational purposes only. In case of deviations, the English version is valid.</em></p><p>Synology Pre-Release Program ("<strong>Program</strong>") gives our users the opportunity to try out new and experimental features to provide feedback to help make Synology products better for everyone. Before participating in the Program, please carefully review the following terms of this Pre-Release Program Agreement ("<strong>Agreement</strong>"), which will create a legal agreement between you and Synology Inc. ("<strong>Synology</strong>", "<strong>we</strong>", "<strong>us</strong>" or "<strong>our</strong>") and governs your participation in the Program. By clicking the "Yes" or "I Accept" button (or other button or mechanism designed to acknowledge agreement to the terms of this Agreement), or by downloading, accessing, installing or using the pre-release product(s), or by signing-up for the Program, you are consenting to be bound by this Agreement.</p><hr><h3 id="1-introduction">1. Introduction</h3><p>The term "<strong>pre-release product</strong>" includes any software, hardware, and service that Synology may offer as part of this program. The terms here create a legal agreement between you and Synology, the operator of the pre-release program. A summarized version is that:</p><ul><li><p>You understand that all pre-release products are experimental in nature and may result in data loss, loss of functionality, instability, insecurity, and other issues that may result in you being unable to use your device or service, or only in a severely degraded state.</p></li><li><p>You understand that new features introduced in pre-release products may be changed or removed in future versions. Pre-release products, features, and the program itself may change or be discontinued at any time.</p></li><li><p>You understand that Synology is unable to provide you with technical support or only in a limited capacity when you install pre-release products due to the experimental and un-verified nature of it.</p></li><li><p>You understand that Synology will ask you for feedback and send you occasional status updates regarding pre-release products with the communications method you provide.</p></li><li><p>You understand that all pre-release products and any information or material related to these products (including but not limited to their nature and existence, features, functionality, marketing materials and screenshots) are confidential information of Synology. You may not disclose such information to anyone without written approval of Synology.</p></li><li><p>You understand that Synology will have the right to seek court orders to stop its confidential information from being public in breach of this Agreement.</p></li><li><p>You understand that some pre-release products may ship with data collection mechanisms for the purpose of testing and product improvement.</p></li><li><p>You understand that for pre-release products, Synology will handle your data differently. For purposes of product testing and improvement, Synology may rely on Standard Contractual Clauses to transfer or access data across our subsidiaries or partners.</p></li><li><p>You license Synology to freely use the feedback and suggestions that you have provided to us.</p></li><li><p>You understand that the pre-release program license is only granted to the primary administrator of Synology device(s). You must be the owner or the primary administrator of the devices. The license is non-transferable, is revocable at any time, is limited to the duration specified by Synology, and must only be used solely for the purposes of testing and evaluating the pre-release product.</p></li><li><p>You understand that your participation in any pre-release program, or in testing pre-release products does not create a legal partnership, agency, or employment relationship between you and Synology. Synology will not compensate you for your participation.</p></li></ul><hr><h3 id="2-participation">2. Participation</h3><p>Synology may occasionally make the pre-release products available publicly or in selective programs based on testing goals. Certain pre-release products or features may be made available inside commercially available products as an opt-in option. Pre-release products may be labeled as Early-Access, Preview, Beta, RC, or with any other identification which implies non-final and work-in-progress status. For non-public pre-release products, Synology reserves the right to determine which participants may be selected as qualified participants of this Program.</p><p>You are volunteering to participate in the Program with the knowledge that the purpose of this Program is to make experimental, preview, beta or other early pre-release products available to you, for the purpose of providing Synology with useful information about your experience with the pre-release product.</p><p>You understand that using experimental and early pre-release product means you may experience occasional crashes and data loss. By participating, you agree to frequently back up your data.</p><p>Your Program participation is voluntary and free, there is no compensation for your participation. Your participation does not create a legal partnership, agency, or employment relationship between you and Synology.</p><p>Your Program participation does not obligate Synology to provide you with Synology software, product, or service.</p><hr><h3 id="3-license-and-restrictions">3. License and Restrictions</h3><p>3.1 Subject to your compliance with this Agreement, Synology hereby grants you a limited, non-exclusive, non-transferable, revocable license, during the term of this Agreement or limited duration specified by Synology, to use the pre-release product(s) in accordance with this Agreement and any additional terms Synology made available to you solely for the purpose of internal evaluation and providing feedback to Synology (the "<strong>Purpose</strong>").</p><p>3.2 You may not (and may not authorize or enable a third party to): (i) reverse engineer, decompile, disassemble, or otherwise attempt to discover the source code or other trade secrets in the pre-release product(s); (ii) access the pre-release product(s) in order to build a similar or competitive application, service, feature or another competitive purpose; (iii) share, publish, distribute, host, rent, lease, sell, commercialize, sublicense, assign or otherwise transfer the pre-release product(s), or the access or use of the pre-release product(s) to any third-party. Synology owns all right, title, and interest in and to the pre-release product, including but not limited to all intellectual property and proprietary rights therein. Synology reserves all rights and licenses not expressly granted herein.</p><p>3.3 You must also agree to additional terms that may apply to or accompany the pre-release product, such as additional Terms of Services, Software End User License Agreements, and accept our Privacy Statement if applicable to the pre-release product. This agreement is supplementary to any product's accompanying terms. Unless otherwise stated, the terms specified in this agreement will take precedence if there are any inconsistencies between the accompanying agreements and this agreement.</p><hr><h3 id="4-confidentiality">4. Confidentiality</h3><p>4.1 Unless otherwise stated, all non-publicly available pre-release products ("<strong>Non-Public Product</strong>") and any information or material related to these products (including but not limited to their nature and existence, features, functionality, marketing materials, and screenshots) are confidential information ("<strong>Confidential Information</strong>") of Synology. Confidential Information also includes the act of participation in the program(s) about Non-Public Product and any communications to and from Synology employees or authorized agents in the program(s), including but not limited to your feedback.</p><p>4.2 You agree to only use such Confidential Information for the Purpose defined in Section 3.1 and not for any other purpose.</p><p>4.3 You promise that you will not disclose, publish, or otherwise disseminate any Confidential Information to any third party without written approval of Synology.</p><p>4.4 You agree to protect the secrecy of and prevent disclosure and unauthorized use of the Confidential Information using the same degree of care that you take to protect your own confidential information and promise that you will in no event use less than reasonable care.</p><p>4.5 You hereby acknowledge that unauthorized disclosure or use of Confidential Information could cause irreparable harm and significant injury to Synology that may be difficult to ascertain and money damages may not be sufficient compensation for breach of your obligation under this Section 4. Accordingly, you agree that Synology will have the right to seek court orders to stop Confidential Information from being public in breach of this Agreement, in addition to any other rights and remedies it may have.</p><p>4.6 Your obligation under this Section 4 survives until the Non-Public Product has been released publicly by Synology.</p><hr><h3 id="5-feedback-and-communication">5. Feedback and Communication</h3><p>Synology releases pre-release products to gather usage patterns, diagnostics data, and general feedback from volunteer users. This in return, allows us to create better products that our users want.</p><p>Feedback from participants for pre-release products should be sent to Synology through support channels or on a Synology-managed service such as Synology Community that is designed to receive and organize feedback. In some cases, Synology may provide you with the ability to participate in private discussion forums with other testers for the same pre-release product.</p><p>For purposes of such discussion forums, Synology will provide a limited exception to Section 4 by allowing you to discuss the pre-release product at a pre-determined location provided by Synology. Except for the limited purpose of discussions with Synology and other testers, when allowed, you should adhere to Section 4 unless otherwise stated by Synology.</p><p>For certain non-public pre-release products, we may utilize the contact information you have provided us to communicate to you about the pre-release products. Communications may include pre-release updates, availability, service updates, feedback requests, requests for additional information, and other topics directly related to the pre-release product and will run for the testing period of the pre-release. If you no longer wish to receive communications for pre-release products, please <a target="_blank" href="https://sy.to/precontact">opt out of the program by contacting us</a>.</p><p>By providing feedback to Synology, you grant to Synology, a worldwide, royalty-free, irrevocable license, with the right to sublicense, the right to use, disclose, share and commercialize your feedback in any way and for any purpose. In addition, you do not expect any type of payment or remuneration from Synology for feedback. You agree that all documents and materials submitted to Synology will become the property of Synology unless Synology agrees otherwise in writing.</p><hr><h3 id="6-data-collection-privacy-policy">6. Data Collection, Privacy Policy</h3><p>The pre-release product may automatically collect information about you and your use of the pre-release product and send that to Synology, which may include your personal information. Information that is sent to us, including but not limited to those outlined in Section 5 and those automatically collected, will be retained and processed for product improvement purposes.</p><p>Certain pre-release products may also ship with features and diagnostics telemetry turned on by default or in a state that is not user-adjustable in order to test specific features and changes. Synology will inform participants of these pre-release products when possible, such as through Release Notes or Upgrade Notes that are made available to you with the pre-release product.</p><p>For the sole purpose of product improvement, any data collected or sent to us regarding the pre-release product will be processed and controlled by Synology and made available to Synology's subsidiaries, authorized agents, and/or other partners. This will include content posted by you on designated Synology-operated discussion forums, contents of support requests, telemetry, and any other communications between Synology (including subsidiaries) and with you.</p><p>Synology will maintain strict access controls and employ methods of minimizing personal information. For users in "Designated Countries", defined in our <a target="_blank" href="https://www.synology.com/company/legal/privacy">Privacy Statement</a>, you must agree to allow data specified in this section to be transferable and accessible to locations outside of locations that the European Commission has designated as having adequate levels of data protection. Synology employs European Commission-approved Standard Contractual Clauses to safeguard the transfer of data between Synology subsidiaries and any subcontractors we may utilize.</p><p>Below describes data collection by Synology about certain pre-release products. If not otherwise mentioned, Synology's <a target="_blank" href="https://www.synology.com/company/legal/privacy">Privacy Statement</a> and this Section 6 applies to data collection, storage, and processing activities for the pre-release products involved and your participation in the Program.</p><h5 id="-active-insight-"><strong>Active Insight</strong></h5><p>Synology collects diagnostic information about the routine operations of your NAS devices in order to generate an Active Insight report and to provide web services. The diagnostic information we collect includes performance data, capacity usage, configuration data, IP address, QuickConnect ID, and hardware faults.</p><p>Your data is stored as long as Synology Active Insight service is enabled. If you choose to disable your Active Insight feature, we will keep your personal information for up to 30 days. Personal information includes information that can be associated with your Synology Account, such as IP address and QuickConnect ID. After the removal of your personal information, the remaining diagnostic information is considered non-personal and will be used to generate aggregated reports to help us to improve our services.</p><h5 id="-c2-hybrid-share-"><strong>C2 Hybrid Share</strong></h5><p>Synology collects usage statistics for Synology C2 Hybrid Share from both the NAS devices and from Synology C2 to improve product usability during the Program. Collected data is associated with your Synology Account, a requirement to access Synology C2.</p><p>From a NAS device with C2 Hybrid Share enabled, we collect information about file protocol usage and file cache settings. From Synology C2, we calculate the storage capacity used, the number of folders and files stored, the sizes of files transferred, and the number of NAS clients connected.</p><p>Data stored on C2 Hybrid Share is encrypted end-to-end and only accessible to you (with the encryption key) and NAS clients connected to that Synology Account.</p><p>All data you store during the Program for C2 Hybrid Share will be deleted after the end of the Program or upon the official release of DSM 7.0. You may also opt-out of the Program by completing <a target="_blank" href="https://sy.to/precontact">this form</a>.</p><h5 id="-dsm-configuration-backup-"><strong>DSM Configuration Backup</strong></h5><p>Synology collects device configuration data of your NAS devices in order to provide the configuration backup and recovery service. Device configuration data we collect include settings for shared folders, users and groups, security, network, login portal, regional options, application privileges, and for notifications, including email accounts registered.</p><p>Your configuration data is stored for as long as the DSM Configuration Backup service is enabled. If the service is disabled, your data will be retained for up to 180 days.</p><h5 id="-quickconnect-"><strong>QuickConnect</strong></h5><p>Synology uses <em>Let's Encrypt</em>, a third-party certificate authority, for our QuickConnect service to ensure connection security after you update your DSM to 7.0 version. The registration for a Let's Encrypt certificate will require the email address of your Synology Account and your <em>QuickConnect DDNS</em>, which is automatically generated with your QuickConnect ID. Please read <a target="_blank" href="https://letsencrypt.org/privacy/">Let's Encrypt Privacy Policy</a> to learn more about how they process your data.</p><hr><h3 id="7-opt-out">7. Opt-Out</h3><p>If you no longer wish to participate in testing the pre-release products, you may stop at any time by stopping the use of the pre-release product. If you no longer wish to receive any updates or notifications about pre-release products, please complete <a target="_blank" href="https://sy.to/precontact">this form</a> to be removed from the program. Certain pre-release products may prevent you from returning to a released version. In these cases, please contact <a target="_blank" href="https://account.synology.com/support">Synology Technical Support</a> for additional information and assistance.</p><hr><h3 id="8-no-warranty">8. No Warranty</h3><p>Synology pre-release products are designated as a work-in-progress and are experimental by nature. The software may be incomplete, may contain errors, cause data loss, and result in the loss of functionality to devices or products that they are used on. Synology, and our affiliates, make no warranties, express or implied, guarantees or conditions with respect to the pre-release products or your participation in the Program. You acknowledge and agree that any use of Synology pre-release product is at your sole risk and that any pre-release product is provided "as is", "as available", and "with all faults". You bear the entire risk of using pre-release products. To the extent permitted by applicable law, we exclude any implied warranties, including for merchantability, satisfactory quality, fitness for a particular purpose, workmanlike effort, and non-infringement.</p><hr><h3 id="9-limitations-of-liability">9. Limitations of Liability</h3><p>TO THE EXTENT NOT PROHIBITED BY APPLICABLE LAW, IN NO EVENT WILL SYNOLOGY, ITS SUBSIDIARIES AND AFFILIATES, AND ITS LICENSORS BE LIABLE TO YOU OR ANY OTHER PARTY FOR DAMAGES OF ANY KIND ARISING OUT OF OR RELATING TO THE USE OF PRE-RELEASE PRODUCTS OR YOUR PARTICIPATION IN THE PROGRAM, WHETHER RESULTING FROM A TORT (INCLUDING NEGLIGENCE), BREACH OF CONTRACT, WARRANTY OR OTHER FORM OF ACTION, INCLUDING BUT NOT LIMITED TO DIRECT, INDIRECT, SPECIAL, INCIDENTAL AND CONSEQUENTIAL DAMAGES. THE PARTIES AGREE THAT THE FOREGOING LIMITATION OF LIABILITY IS MATERIAL TO THIS AGREEMENT.</p><hr><h3 id="10-indemnification">10. Indemnification</h3><p>You agree to indemnify and hold Synology harmless from any claims, fees, fines, demands, losses, liabilities, damages, and costs, including reasonable attorney's fees, arising from or related to your use of the pre-release product, including but not limited to allegations arising from your breach of any terms herein and/or allegations that data processed by the pre-release product violates or infringes the privacy, data protection, or intellectual property rights of a third party.</p><hr><h3 id="11-termination">11. Termination</h3><p>Synology reserves the right to terminate this Agreement or your access to the pre-release product at any time, with or without cause, effective upon notice of termination. You agree that upon any termination, you will promptly return or destroy the pre-release products and related information as requested by Synology and provide Synology with a certificate verifying such destruction. Upon termination, you must immediately cease using the pre-release products. Sections 3.2, 3.3, 4, 5, 6, 8 through 14 shall survive any expiration, termination or rescission of this Agreement.</p><hr><h3 id="12-assignment">12. Assignment</h3><p>You are not allowed to assign or transfer this Agreement, or any of your rights under it, in whole or in part, by operation of law or otherwise, without the prior written consent of Synology.</p><hr><h3 id="13-change-to-agreement">13. Change to Agreement</h3><p>Synology retains the right to change this Agreement at any time. If we change this Agreement, we will post a notice on the <a target="_blank" href="https://sy.to/prerelease">Program site</a> or otherwise notify you that this Agreement has been changed. If you do not agree to these changes, then you must stop using the pre-release product. If you do not stop using the pre-release product, then your continued use will constitute your acceptance of the changed agreement, and the changed agreement will apply to your use of the pre-release product and your participation in this Program after the date of the change.</p><hr><h3 id="14-applicable-law">14. Applicable Law</h3><p>This Agreement and your participation of the Program under this Agreement shall be governed by the laws of Taiwan without regard to its conflict of law provisions. You and Synology agree to submit to the exclusive jurisdiction of the District Court of Taipei, Taiwan, to resolve any legal matter arising from this Agreement. Notwithstanding this, you agree that Synology shall still be allowed to apply for injunctive remedies (or an equivalent type of urgent legal relief) in any jurisdiction.</p>"
privacy_policy	=	"Privacy Statement"
privacy_statement_updated	=	"We have updated our {0}Privacy Statement{1} to make it easier to understand and to reflect recent changes to our policy. We encourage you to read our Privacy Statement by clicking on the link above and regularly check for any changes."
prompt_enable_serviece	=	"Click "OK" to go to the "{0}" page."
reboot_warn	=	"This package requires you to restart _DISKSTATION_ after installation. Are you sure you want to restart?"
recommend	=	"Recommended"
related_packages	=	"Recommended Packages"
rename_conflict_group	=	"The group "{0}" was renamed "{1}" during package installation."
rename_conflict_user	=	"The user "{0}" was renamed "{1}" during package installation."
repair	=	"Repair"
repair_all	=	"Repair All"
repair_operation_desc	=	"Package Center will automatically perform the following operation when {0} is repaired."
repair_operation_desc_plural	=	"Package Center will automatically perform the following operations when {0} is repaired."
repair_pkg	=	"Repair {0}"
repair_pkg_fail	=	"Failed to repair "{0}". {1}"
repairall_beta_confirm	=	"Some packages will be updated to beta version, such as {0}. <br>Do you want to continue?"
repairing	=	"Repairing..."
replace_pkg	=	"Integrate {0}"
report	=	"Contact Support"
report_desc	=	"Send feedback or report problems"
require_pgsql	=	"To install or enable this package, please attach an external storage device and enable system database at Control Panel > System Database first."
require_php_nosafedir	=	"This package requires you to disable PHP safe_mode_exec_dir access limitation."
require_service	=	"This package requires you to enable "{0}"."
require_sshd	=	"This package requires SSH service be enabled."
required_newer_version	=	"This package requires you to update your _OSNAME_ to the latest version."
restart_services	=	"Restarting services..."
restart_services_failed	=	"This package was successfully installed, but failed to restart related services."
revoke_certificate	=	"This certificate has already been revoked."
select_volume	=	"Please select a volume"
share_creation_failed	=	"Unable to create a shared folder named "{0}""
share_is_encrypted	=	"Please mount the encrypted shared folder {0} before proceeding."
show_less	=	"Show less"
show_more	=	"Show more"
sort	=	"Sort by"
sort_by_name	=	"Sort by name"
sort_by_popularity	=	"Sort by popularity"
sort_by_recent_popularity	=	"Sort by recent popularity"
stable_channel	=	"Release channel"
start_check_alert	=	"The system failed to start this package due to the following reasons:"
start_check_confirm	=	"If you start this package now, the following functions might not work properly. Do you want to continue?"
start_depend_unstart	=	"Please run the following package(s) before running this package:"
start_failed	=	"Failed to run {0}."
start_operation_desc	=	"Package Center will automatically perform the following operation when {0} is running."
start_operation_desc_plural	=	"Package Center will automatically perform the following operations when {0} is running."
start_pkg	=	"Run {0}"
start_pkg_fail	=	"Failed to start "{0}". {1}"
start_stopped_by_dep_limit	=	"{0} has been fixed. The following package(s) will be started automatically: {1}"
starting	=	"Starting..."
status_broken_title	=	"Attention required"
status_installed	=	"Installed"
status_installed_title	=	"Installed"
status_update_available_title	=	"Updates available"
status_update_title	=	"{0} available package update(s)"
status_upgraded	=	"Updated"
status_version_limit	=	"Repair Required"
stop_before_proceed	=	"Some package data are stored in a volume you want to remove. Stop the following packages first: <span class="bold-font">{0}</span>."
stop_check_alert	=	"Failed to stop this package due to the following reasons:"
stop_check_confirm	=	"Stopping this package will cause abnormalities in the following functions. Do you want to continue?"
stop_operation_desc	=	"Package Center will automatically perform the following operation when {0} is stopped."
stop_operation_desc_plural	=	"Package Center will automatically perform the following operations when {0} is stopped."
stop_pkg	=	"Stop {0}"
stop_pkg_fail	=	"Failed to stop "{0}". {1}"
stopped_by_dep_limit	=	"Stopped due to dependency issues"
stopped_by_dep_limit_desc	=	"This package is stopped due to dependency issues."
stopped_by_volume_unmount_desc	=	"The volume where this package or the related services are installed is probably unmounted. Please go to <b>Storage Manager</b> > <b>Storage</b> for more information."
stopped_desc	=	"This package is stopped."
stopping	=	"Stopping..."
support	=	"Support"
support_desc	=	"Contact support"
synology	=	"Synology"
synology_trust_developer	=	"Synology Inc. and trusted publishers"
synoserver_others	=	"Packages by 3rd Party"
synoserver_packages	=	"Packages by Synology"
system_error	=	"System error."
system_volume	=	"System Partition"
term_remind	=	"Please agree to the Terms of Service and acknowledge the Privacy Statement"
termofprivacy_confirm	=	"I acknowledged the Privacy Statement"
termofprivacy_content	=	"<h1>PRIVACY STATEMENT</h1><h2>Introduction</h2><p>Synology holds itself to high standards in handling and processing personal information. The statement outlined below establishes the boundaries of what Synology processes and what you, as our customer and the data subject ("<strong>users</strong>"), are entitled to. This Privacy Statement applies when you use our features and services ("<strong>Services</strong>"). Additionally, we have a Cookie Policy for use of our website.</p><p>Synology operates around the world and has adopted English as the controlling language of this Privacy Statement. Additional translations are provided for convenience. You may switch to other languages by using the language selection button at the bottom of the webpage.</p><p>This Privacy Statement applies to Synology-provided services offered on Synology-owned websites, Synology-branded applications, services provided from physical Synology products ("<strong>Synology Devices</strong>"), and digital or physical services directly offered by Synology. For specific programs, products, or Services offered by Synology, individual Service-specific privacy policies may supersede and prevail over this Privacy Statement or supplement this Privacy Statement in relevant parts.</p><h2>Your Personal Data</h2><p>Personal data refers to identifying information that relates to, describe, is capable of being associated with, or can reasonably be linked directly or indirectly to, an individual or a household. Identification can be by the data alone or in conjunction with any other data in the data controller's possession or likely to come into such possession. Synology collects information only to provide you with the Services and to improve user experiences. To provide you with Synology Devices or Services, including responding to your inquiries, we may ask for your personal information. If you choose not to provide the requested information, we may be unable to deliver the desired Services. Most of Synology's Services are provided under a Synology Account, and if you no longer require the Service or wish to have your data removed, you may delete your Synology Account.</p><p>In general, Synology collects personal data from you through your use of our Services. Synology also uses cookies and other technologies to gather information regarding a visitor's browsing preferences. The data we collect and store from you, including in the preceding 12 months, may consist of the following data categories:</p><ul><li>Contact Information: Your e-mail address (used as identification for our services and as the primary communication method), name, address, phone number, and additional contact detail that are used to provide registration, device shipping, and billing verification services.</li><li>Commercial information: Your payment method and financial data (credit card, bank account number, etc.), which is used for payment transactions for a service or product, logistics, and billing data (such as customs ID and tracking number).</li><li>Technical Information: Your IP address, device's location (latitude and longitude), unique device identifiers, referral URL, computer and connection data (such as the type of operating system you use, device and software information, browser type, browser language and version, ad data, access times, Internet or other network activity such as weblog information) used for fraud prevention, security purposes, warranty registration, customer support services, providing desired functionality, and for transactions.</li><li>Account Information: Your account name, Internet, or other network activity information such as account login, account activity, transaction data, and any information you provide during a transaction, or other transaction-based content that you generate or connected to your account as a result of your transaction.</li><li>Communication History: Your chat and service history with us, and any other information you may provide us when you interact with us.</li></ul><p>Other information that you provide to us through digital or physical means may be stored on a case-by-case basis depending on the reason it was provided.</p><p>Synology does not access (or use) files uploaded by users to their devices.</p><p>Learn more from our <strong><a target="_blank" href="https://www.synology.com/company/legal/Services_Data_Collection_Disclosure">Services Data Collection Disclosure</a></strong> for specific Services and <strong><a target="_blank" href="https://www.synology.com/company/legal/cookie_policy">Cookie Policy</a></strong> for specific information on the data processed and ways they are stored for each Service.</p><h2>Lawful Bases and Other Usage</h2><p>The lawful bases for Synology to process your personal data for the various types of processing performed on your personal data are, as applicable, processing based on your consent, as necessary for us to enter into and to perform our contract with you, or in certain circumstances, as necessary for Synology to pursue our "legitimate interests", where our interests are not outweighed by your rights and freedoms.</p><p>"Legitimate interest" situations necessitating such actions may include the following: to protect you, us, or others from security threats, to comply with laws we are subjected to, to implement information sharing within Synology's group affiliates, to prevent fraud, misuse of company IT systems, to operate a whistleblowing scheme, for purposes of mergers and acquisitions, and to perform internal investigations and auditing.</p><p>Synology will collect, process, and use the personal data supplied by you only for the purposes communicated to you and will not disclose your data to third parties except under the lawful bases set forth above. Synology does not share your personal information with third parties for the purpose of direct marketing. Synology also does not engage in the selling of personal data to any third party.</p><p>The purposes for which Synology collects and processes personal data may include, but not limited to:</p><ul><li>Operating our websites to provide you access to and use of our websites and Services;</li><li>Administering your use of our Services, to communicate with you and respond to your requests;</li><li>Managing your Synology Account;</li><li>Customizing your Service experience with us, to improve our Services and products;</li><li>Providing you with our online or offline marketing measures and activities; including but not limited to newsletters, online and live event registrations, and other promotional information and materials; </li><li>Sharing your contact details with our subsidiaries, affiliates, authorized repair and support centers, authorized logistics companies, communications infrastructure, and other entities deemed necessary to carry out providing these Services to you;</li><li>Sharing your contact details with our affiliate offices around the world within our group of companies for the purposes of internal administration and back-office support;</li><li>Ensuring our network security, and to prevent fraud;</li><li>Enforcing or defending our policies or contract with you; and </li><li>Maintaining the integrity and safety of our data technology systems that store and process your personal data. </li></ul><p>You are not under any obligation to provide us any of your personal data. However, please note that without certain data from you, we may not able to undertake some or all of our obligations to you under our contract with you, or adequately provide you with our full range of services. If you would like to obtain more detail about this, please contact us following the instructions in the "Contact Information" section below.</p><h2>Period of Storage</h2><p>Synology keeps your personal data for no longer than reasonably necessary for the given purpose for which your data is processed. If you will provide us, or have provided us, consent for us to process your data, we will process your data for no longer than your consent is effective. Notwithstanding the above, we may retain your personal data as required by applicable laws and regulations, as necessary to assist with any government and judicial investigations, to initiate or defend legal claims or for the purpose of civil, criminal, or administrative proceedings. If none of the above grounds for us to keep your data apply, we will delete and dispose of your data in a secure manner.</p><h2>Data Controllers, Contracting Parties, Transfer of Data</h2><p>We use the term "<strong>Designated Areas</strong>" to refer to the residential locations that are in the European Union (EU), European Economic Area (EEA), and Switzerland.</p><p>If you reside in the Designated Areas, <strong>Synology Inc.</strong> will be the controller of your personal data, except under limited circumstances where Synology holds marketing events in Germany, France, or the United Kingdom, for which <strong>Synology GmbH</strong>, <strong>Synology France SARL</strong>, or <strong>Synology UK Ltd</strong> will respectively be the controller of your personal data. Other than for such limited circumstances, <strong>Synology Inc.</strong> will be responsible for collecting and processing data for our Services, which will be covered by the Terms of Service of the relevant Services.</p><p>If you reside outside the Designated Areas, <strong>Synology Inc.</strong> will be the controller of your personal data. Your usage of services provided by Synology will be bound by the Terms of Service of the relevant Services.</p><p>Synology's Services include providing data processing, order fulfillment, technical support, device replacement, payment invoicing, processing and collection, event registration, customer services, marketing support, as well as the transfer of data based on users' decisions, around the world. The nature of these Services requires us to be able to transfer your personal data into and out of the European Union (EU) to Synology affiliates including <strong>Synology GmbH</strong> and <strong>Synology Inc.</strong>, authorized repair and support centers, authorized logistics companies, communications infrastructure, and other entities deemed necessary to carry out providing these Services. We may also transfer your data to third-party service providers whom we subcontract to work on our behalf or for us and therefore may have access to the data only for purposes of performing these tasks on our behalf and under obligations similar to those described in this Privacy Statement, who perform functions such as data processing, auditing, order fulfillment, managing and enhancing customer data, providing customer service, conducting customer research or satisfaction surveys, marketing support, payment processing and invoice collection support, informational systems technical support, to help us provide, analyze, and improve our Services and to assist us in detecting and dealing with data breaches, illegal activities, and fraud. We may also share your personal data with governments and/or government-affiliated institutions, courts, or law enforcement agencies, to comply with our obligations under relevant laws and regulations, enforce or defend our policies or contract with you, respond to claims, or in response to a verified request relating to a government or criminal investigation; provided that, if any law enforcement agency requests your data, we will attempt to redirect the law enforcement agency to request that data directly from you, and in such event, we may provide your basic contact information to the law enforcement agency. We may also provide your data to third parties involved in a legal proceeding if they provide us with a court order or substantially similar legal procedure requiring us to do so. The above parties are the recipients of your personal data.</p><p>Synology takes measures to ensure that your personal data is processed as required by this Privacy Statement and applicable laws, including to ensure your personal data is transferred to a residential location that has an adequate level of data protection approved by the European Commission. In circumstances where an adequate level of data protection is not available for the residential location of the data recipient, Synology requires that such recipient adopts European Commission-approved Standard Contractual Clauses with Synology as a legal mechanism for data transfer, to ensure that such data is safeguarded and processed by the recipient strictly within the restrictions and conditions set forth in such Standard Contractual Clauses.</p><h2>Your Rights to your Personal Data</h2><p>Synology's services are generally provided on an opt-in basis, with required and collected information differing on a per-service basis. Unless subject to an exemption, you will have the following rights with respect to your personal data:</p><ul><li>The right of access: You may request a copy or specific pieces of your personal data that we have collected at the time.</li><li>The right to request information about the categories of your personal data which we have collected and the categories of sources from whom we have collected such data.</li><li>The right to be informed about the business or commercial purpose for our collection of your personal data.</li><li>The right to request information about the categories of your personal data which we have disclosed to third parties and the categories of third parties to whom we have disclosed your personal data.</li><li>The right of portability: You may request us to transmit your personal data directly to another data controller, where the processing is based on your consent or is necessary for the performance of a contract with you, and in either case, we process the data by automated means. The right to delete data: You can request us and our third-party processors to delete data, subject to applicable laws: You can ask us or our third-party processors to delete data for which we no longer need in order to provide service to you.</li><li>The right to correct or change data: You can modify your contact information through your Synology Account. You can also ask us to change, update, or fix data that are incorrectly presented and unable to be changed by yourself.</li><li>The right to object: You can object to the usage of some or all of your personal data which is based on legitimate interests pursued by Synology.</li><li>The right to restrict the use of data: You can ask us to stop or limit the usage of some or all of your personal data that we no longer need, in order to provide service to you, or have legal rights to retain.</li><li>The right not to be discriminated against by us for exercise any of your above rights.</li></ul><p>You may make these requests by submitting a request through your <a target="_blank" href="https://account.synology.com/support">Synology Account</a> or our <a target="_blank" href="https://www.synology.com/company/contact_us">website</a>. Upon receipt, we will evaluate your request and inform you how we intend to proceed. Under certain circumstances, and according to applicable European Union or European Union state laws and regulations, we may withhold access to your data, or decline to modify, erase, port, or restrict the processing of your data. Synology will respond to your request within thirty days after receiving it. Please be advised that if you exercise the rights to erase data, restrict, or object to our processing, or to withdraw your consent, we may not be able to continue our Services to you if the necessary data is missing for processing.</p><p>If you are a resident in the Designated Areas, you have the right to file a complaint with the <a target="_blank" href="https://www.bfdi.bund.de/EN/Service/Kontakt/contact_node.html">German Federal Commissioner for Data Protection and Freedom of Information</a> (BfDI) or with the competent authority where you reside or in which your data is processed. In case of disagreements relating to Synology’s processing of your personal data, you can submit a request for administrative action to the data protection supervisory authority with the competent authority where you reside or in which your data is processed. Please click <a target="_blank" href="http://ec.europa.eu/newsroom/article29/item-detail.cfm?item_id=612080">here</a> for a list of local data protection authorities in the EEA.</p><h2>Security</h2><p>Synology employs multiple methods of data protection in order to minimize the risk of misuse, unauthorized access and disclosure, and loss of access. Some of these safeguards include the use of pseudonymization, data encryption, data hashing, and other technologies and permission control methods. When our employees directly handle or access your personal information, we do so on secured networks and through fine-grained permission control to limit who can access your information. Data you provide to us is encrypted and stored on both third-party storage and on Synology-managed devices, depending on the service.</p><p>Synology logs and stores IP addresses of both users to our web services solely for security purposes. This log is archived and then removed at irregular intervals depending on ongoing or existing security threats or investigations. If Synology has overwhelming evidence that certain IP addresses, users, or devices may be purposely damaging or hindering our operations or service quality, we may deny further services and/or report such behavior to relevant authorities.</p><p>Synology removes data that is no longer required to provide services based on each service.</p><h2>Changes to Statement</h2><p>Synology may make amendments to this document when needed to reflect statement updates, customer feedback, as well as new products or services. If the terms modify the way we process or handle your data or affect your rights, we will notify you through direct message or by posting notices if we are unable to directly reach you. We encourage that you regularly review this Privacy Statement to understand how your data is handled.</p><h2>Data from Children</h2><p>Synology's products and services are targeted at professionals and are not designed nor intended to be used by children under 16 years of age. Synology does not typically collect date of birth information as it is not used by Synology. If children under the minimum age of the relevant jurisdiction must use Synology's products and services, explicit parental consent must be provided and verified. If Synology is notified or discovers that data collected is from a child under the minimum age, we will take procedures to delete the information as soon as possible.</p><h2>Notice to End Users</h2><p>Certain Synology products or services may be managed or administered to you by organizations or other users. Your use of these managed Synology products or services will be affected by the terms or policies that are provided and dictated by the organization or service provider. Please direct inquiries in these instances to the administrator of the device or service. Synology will not be responsible for the privacy or security practices, including the lawfulness of practices for our customers as they may manage or implement our products and services in a manner that is no longer determined by Synology's policies or agreements.</p><h2>Contact Information</h2><p>You can directly contact us through your <a target="_blank" href="https://account.synology.com/support">Synology Account</a>, or by submitting a form available on our <a target="_blank" href="https://www.synology.com/company/contact_us">website</a> for privacy-related questions or concerns.</p><p>If you are a California resident, you may also contact Synology to this toll-free at 1-866-467-8688 (Service Code 951#). If you are unable to resolve the issue, you have options to exercise your rights as detailed in the previous "Your Rights to your Personal Data" section. Synology will respond to your requests within thirty days after receiving it.</p><p>You may also contact Synology through the following addresses.</p><h5>For users residing in the Designated Areas:</h5><p><code>Synology GmbHAttn: Data ProtectionGrafenberger Allee 295  40237 Düsseldorf  DEUTSCHLAND</code>Tel: +49 211 9666 9666</p><h5>For users residing outside the Designated Areas:</h5><p><code>Synology Inc.Attn: Data Protection9F, No. 1, Yuan Dong Rd.,  Banqiao, New Taipei 220632  TAIWAN</code>Tel: +886 2 2955 1814</p>"
termofprivacy_subtitle	=	"Synology collects diagnostics and statistical data to improve our products and services."
termofprivacy_title	=	"Synology Package Center Privacy Statement"
termofservice_confirm	=	"I have read and agreed to the Package Center Terms of Service"
termofservice_content	=	"<h1>Synology Package Center Terms of Services</h1><p>Before you use Synology Package Center, you must accept to be bound by this contract which contains terms of the relationship between you and Synology for your use of Synology Package Center service ("<strong>Service</strong>") and the packages you download from the Service.</p><p>By clicking "I accept", or by using Synology Package Center Service, you agree that your use of the Service and the Synology Packages available through the Service is subject to the Package Center Terms and Conditions ("<strong>Package TOS</strong>") contained in this contract and Synology <a target="_blank" href="https://www.synology.com/company/legal/terms_EULA">END USER LICENSE AGREEMENT</a> ("<strong>EULA</strong>"). If there is any conflict between the Package TOS and the EULA, the Package TOS shall prevail.</p><p>Please review the following terms and conditions carefully and be advised that we do not provide any warranties for the Service. This contract also limits our liability for your use of the Service.</p><p style="display: none;"><em>This translation is for informational purposes only. In case of deviations, the English version is valid.</em></p><h2>Terms and Conditions</h2><ol><li><p>Synology Package Center and Package.</p><p>1.1. Synology Package Center is provided by Synology, through which you can browse, search, download and purchase packages for your Synology Device. You shall not access Synology Package Center on a non-Synology device.</p><p>1.2. Packages available through Synology Package Center are only licensed, not sold, to you, when you download any of them by clicking "Install". For each package, Synology Package Center will indicate the name of the package developer licensing the package to you, if available, which may be Synology ("<strong>Synology Packages</strong>") or a third-party package developer ("<strong>Third-Party Packages</strong>"), collectively referred to as "<strong>Package</strong>" or "<strong>Packages</strong>". The availability of Package and its features may vary between countries and not all Packages and their features may be available in your country.</p><p>1.3. License for Installation.</p><div style="padding-left: 2em;"><p>You can install and use one copy of the Package to each one Synology Device you personally own or control. You shall not install or use a copy of the Package on a device you do not own or control.</p></div><p>1.4. When you install any of Third-Party Package, Synology is not the party to the license relationship between you and the package developer of the Third-Party Package. Your use of the Third-Party Package will be governed by and subject to the terms and conditions specified in the Third-Party Package. Furthermore, Synology is not responsible or liable for (i) the Third-Party Package and its content; (ii) your use of the Third-Party Package; or (iii) any warranties or claims relating to the Third-Party Package.</p><p>1.5. This contract provides you the non-exclusive right, solely as expressly permitted in the Package TOS and EULA, to access, view and use the Synology Package Center on your Synology Device. All other rights, interests and title in the Synology Package Center and its Packages not expressly granted to you in this Package TOS and EULA are reserved. You must comply with any technical limitations in the Package that only allow you to use it in certain ways. You may not:</p><ul><li>Combine the Package into a commercial product, except as specifically permitted by the terms of the individual Package;</li><li>Transfer the Synology Package or this contract to any third party;</li><li>Rent, lease or lend the Package, except as specifically permitted by the terms of the individual Package;</li><li>Attempt to, or assist, authorize or encourage others to circumvent, reverse engineer, decompile or disassemble Synology Package Center or the Package; or</li><li>Make more copies of the Package than specified in this contract; or publish the Synology Package for others to copy, except as specifically permitted by the terms of the individual Package.</li></ul><p>1.6. When you install or use any of Third-Party Package, you have to keep it in mind that its developer may change its terms and conditions governing the Third-Party Package, or modify, suspend, cancel or stop its services thereof at any time; and that Synology is also entitled to change, cancel or stop the Third-Party Package and its services, at any time and for any reason. No warranty or commitment is provided therefor by Synology.</p><p>1.7. Violation of License Terms.</p><div style="padding-left: 2em;"><p>If you violate any of the terms of this contract, your rights under this license will immediately terminate, and Synology may terminate your access to the Service and the Package without any refund or prior notice to you.</p></div></li><li><p>If you are considered a minor in your country, you must have your parent or guardian's permission to use Synology Package Center and to accept this contract.</p></li><li><p>You Are Responsible For Your Synology Device. You are responsible for your Synology Device and any activity that takes place with your Synology Device.</p></li><li><p>Compliance with Law and Synology policy. When you use the Service, you will comply with (i) the law and (ii) any codes of conduct or other notices we provide.</p></li><li><p>When you use the Service, you may not (i) engage in or facilitate further unlawful conduct; (ii) damage, disable, overburden, or impair Synology Package Center any functionality on which Synology Package Center operates, or interfere with anyone's use and enjoyment of Synology Package Center; and (iii) use Synology Package Center in a way that harms Synology, Synology's affiliates, package developers, or any customer of Synology;</p></li><li><p>Content of Synology Package Center.</p><p>6.1. There are two types of content relating to Synology Package Center, i.e. packages provided by Synology ("<strong>Synology Packages</strong>") and packages provided by a third-party package developer ("<strong>Non-Synology Packages</strong>", "<strong>Third-Party Packages</strong>").</p><p>6.2. Except for Synology Package, you understand that (i) Synology does not control or endorse Non-Synology Package; (ii) Synology does not claim ownership of nor take responsibility for Non-Synology Package; and (iii) Synology is not responsible for any Non-Synology Package, its content, ownership, and etc. and (iv) you will contact the third party directly for any questions or problems you have in downloading or using Non-Synology Package.</p><p>6.3. Please be advised that any content in Synology or Non-Synology Package such as music, photos and video may be protected by copyright and that People appearing in content may have a right to control use of their copyrighted content. You may not share the content in Synology Package or Non-Synology Package with other people unless you own the rights or have permission from the owner. You understand that sharing content with other people, which violates others' copyrights and intellectual property rights, constitutes a breach of this contract.</p></li><li><p>Purchases of Package and Refunds.</p><p>7.1. Charges.</p><div style="padding-left: 2em;"><p>Section 7 applies to any purchases made from Synology Package Center, including of Synology Package and Non-Synology Package. Please be advised that for any of your purchase of Third-Party Package, Synology may be appointed to be an agent by the package developer in connection with payment collection, issuance of invoice and any refund for the transaction, or the package developer may independently manage the payment collection, invoice issuance and refund process. You acknowledge that, even if you do not make any purchase, you may still incur other charges (not covered by this Section 7), incidental to your downloads or use of the package, if the package so specifies.</p></div><p>7.2. Payment.</p><div style="padding-left: 2em;"><p>When you purchase a package for which a fee is payable, you select or confirm your payment method. You must be authorized to use the payment method you select or confirm. You are responsible for the timely payment of all fees and for providing Synology with valid payment method information for payment of all fees. You authorize us to charge you for package purchases using your payment method. You acknowledge that your payment method may require us to send your charges to a third party, such as a payment processor.</p></div><p>7.3. Prices and Taxes.</p><div style="padding-left: 2em;"><p>The price for package excludes all taxes and other charges as stated with the purchased package (such as VAT, sale tax and etc.), unless stated otherwise. You are responsible for any taxes that you are obligated to pay or that we may collect from you and all other charges to be incurred.</p><ul><li>The Prices for packages may change at any time, and Synology does not provide price protection or refunds in the event of a price reduction or promotional offering.</li><li>Please be advised that any currency exchange settlements are based on your contract with your payment method provider.</li></ul></div><p>7.4 Refund policies.</p><div style="padding-left: 2em;"><p>Unless otherwise provided by law or specified by the terms associated with individual Packages, You may cancel your purchase of the Package by contacting our technical support team, and get a refund of the purchase price upon deleting all copies of the acquired Package. Synology reserves the right to approve or deny any cancellation made after you submit the support ticket at its sole discretion. If the applicable law allows you to cancel the transaction within a specified period, Synology will make a refund to you, provided that only the cancellation is made within the period required by the applicable law, and that you have deleted all copies of the acquired Package. Upon cancellation, you may no longer be licensed to access or use the Package that you acquired through that transaction. You shall comply with the Synology's request to confirm that you have deleted all copies of the acquired Package.</p></div><p>7.5 Sole Remedy.</p><div style="padding-left: 2em;"><p>If a package becomes unavailable following a transaction but prior to download, your sole remedy is a refund. If technical problems prevent or unreasonably delay delivery of your package, your exclusive and sole remedy is either replacement or refund of the price paid, as determined by Synology.</p></div></li><li><p>Privacy Policy.</p><p>8.1. Your use of the Service is subject to Synology's <a target="_blank" href="https://www.synology.com/company/legal/privacy">Privacy Statement</a> and <a target="_blank" href="https://www.synology.com/company/legal/Services_Data_Collection_Disclosure#package-center">Data Collection Disclosure</a>. In addition, for the purpose of operating and providing Synology Package Center, we may access or disclose your contact information, in order to: (a) comply with the law or respond to lawful requests or legal process; (b) protect the rights or property of Synology or our customers and package developers, including the enforcement of our contracts or policies governing your use of Synology Package Center; (c) act on a good faith belief that such access or disclosure is necessary to protect the personal safety of Synology employees, customers, package developers, or the public or (d) to contact you regarding issues with the packages you have downloaded.</p><p>8.2. Please be advised that Synology retains the right to block or otherwise prevent delivery of any type of communication to or from Synology Package Center as part of our efforts to protect Synology Package Center, protect our customers, package developers and the relevant right owner or prevent you from breaching this contract, and that the technology or other means we use may hinder, break or stop your use of Synology Package Center.</p></li><li><p>Change to Contract.<br /> Synology retains the right to change this contract at any time. If we change this contract, we will post a notice on the Synology DSM, Synology SRM, or otherwise notify you that the contract has been changed. If you do not agree to these changes, then you must cancel and stop using Synology Package Center. If you do not stop using Synology Package Center, then your continued use will constitute your acceptance of the changed contract, and the changed contract will apply to your use of Synology Package Center after the date of the change.</p></li><li><p>Change or Cancel Synology Package Center and its Packages.<br />We may change Synology Package Center, delete features, cancel or suspend access to Synology Package Center Service at any time and for any reason. Our cancellation or suspension may be without cause and without notice. Upon cancellation, your right to use Synology Package Center stops right away. Once Synology Package Center is canceled or suspended, any data you have stored on Synology Package Center, including backup copies of packages you may have downloaded, may not be retrieved later. Our cancellation of Synology Package Center will not alter your obligation to pay all incurred charges. You agree that unless required by applicable law, Synology has no responsibility to continue making Packages available to you through the Service, Synology, at its sole discretion, may alter or cease features of Packages without prior notice to You, and Synology will not be liable to you if any Packages and their features, including purchased packages, become unavailable for download, re-download, access or use.</p></li><li><p>DISCLAIMER OF WARRANTY.<br />We provide Synology Package Center and any of the packages therein "as-is", "with all faults", and "as available". We do not guarantee the accuracy or timeliness of information available in Synology Package Center or any package therein. We and our affiliates and package developers give no express or implied warranties, guarantees or conditions. You may have additional consumer rights under your local laws that this contract cannot change. We exclude any implied warranties including those of merchantability, fitness for a particular purpose, workmanlike effort and non-infringement.</p></li><li><p>LIABILITY LIMITATION.<br />Synology and its affiliates and package developers (unless alternative package license terms are provided with the package) shall not be liable under this contract for any direct damages in excess of the amount you paid for Synology Package Center or the package, as applicable. You cannot recover any other damages, including consequential, lost profits, data loss, special, indirect, incidental, or punitive damages.</p></li><li><p>Contract Interpretation.<br />All parts of this contract apply to the maximum extent permitted by law. If a court decides that any part of this contract cannot be enforced, the part will be replaced by the terms that most closely match the intent of what cannot be enforced, but the rest of this contract will not change. This is the entire contract between you and Synology regarding your use of Synology Package Center. It supersedes any prior contract or statements regarding your use of Synology Package Center.</p></li><li><p>One Year Limitation for Your Claim.<br />Any claim related to this contract or Synology Package Center shall be brought within one year. The one-year period begins on the date when the claim first could be filed. The claim will be permanently barred, if it is not filed in time. This applies to you and your successors. It also applies to us and our successors and assigns.</p></li><li><p>Governing Law.<br />The laws of Taiwan will govern the interpretation of this contract, any terms thereof, package purchase and any claims arisen therefrom, unless otherwise specified in the package relating to the claim, without regard to the conflicts of law's provisions thereof, and shall be brought in a court in Taiwan. You agree to submit to the personal and exclusive jurisdiction of any of those courts.</p></li><li><p>Assignment.<br />You may not assign this contract, or any part of it, to any other person. You may not transfer to anyone else, either temporarily or permanently, any rights to use Synology Package Center or any part of Synology Package Center.</p></li><li><p>Notices.</p><p>17.1. Your Notices to Us. You may notify us in the form required in <a target="_blank" href="https://www.synology.com/company/contact_us">https://www.synology.com/company/contact_us</a>. We do not accept e-mail notices.</p><p>17.2. Notices We Send You; Consent Regarding Electronic Information.</p><div style="padding-left: 2em;"><p>This contract is in electronic form. We may send you certain information regarding Synology Package Center that the law requires us to send you. We may send you this information in electronic form (i) by e-mail at the e-mail address you specified for your use of Synology Package Center, if have; (ii) by access to a Synology website that will be generally designated in advance for this purpose; or (iii) by a prompt notification message upon launching Synology Package Center, Synology DSM, or Synology SRM.</p><p>Notices provided to you via email or pop-up notification messages will be deemed given and received on the date when the notification was sent out. As long as you can access and use Synology Package Center, you have the necessary software and hardware to receive these notices or message upon your use of Synology Package Center. If you do not consent to receive any notices electronically, you must stop using Synology Package Center.</p></div><p>17.3. Copyright and Trademark Notices.</p><div style="padding-left: 2em;"><p>All contents of Synology Package Center are Copyright © Synology Inc. and other copyright owners. Copyright and other intellectual property laws and treaties protect any software or content provided as part of Synology Package Center. The names of actual companies and products mentioned in Synology Package Center may be the trademarks of their respective owners. Any rights not expressly granted herein are reserved.</p></div></li><li><p>Support.<br />Customer support for Synology Package Center is available at <a target="_blank" href="https://www.synology.com">https://www.synology.com</a>.</p></li></ol>"
termofservice_subtitle	=	"Your Synology device is easily customizable with additional functionality. Before we begin, you will need to read and agree to the Package Center Terms of Service."
termofservice_title	=	"Synology Package Center Terms of Service"
termsofservice	=	"Terms of Service"
termsofservice_accept	=	"I have read and agree to the Synology Package Center Terms of Services"
termsofservice_desc	=	"By using Package Center, you agree to be bound by the {0}. Please read them carefully."
termsofservice_new_desc	=	"Package Center provides new features now. Please read and accept the {0} before you continue."
thirdparty	=	"Third-party"
title_packages	=	"Packages"
trust_feed_server_keys	=	"Adding the package source will also trust the publisher's certificate on this server."
trust_level	=	"Trust Level"
udc_policy_updated	=	"We have updated our {0}Services Data Collection Disclosure{1} to make it easier to understand and to reflect recent changes to our policy. We encourage you to read our Services Data Collection Disclosure by clicking on the link above and regularly check for any changes."
uninstall_before_proceed	=	"Some packages are installed on a volume you want to remove. Uninstall the following packages first: <span class="bold-font">{0}</span>."
uninstall_check_alert	=	"Failed to uninstall this package due to the following reasons:"
uninstall_check_confirm	=	"Uninstalling this package will cause abnormalities in the following functions. Do you want to continue?"
uninstall_operation_desc	=	"Package Center will automatically perform the following operation when {0} is uninstalled."
uninstall_operation_desc_plural	=	"Package Center will automatically perform the following operations when {0} is uninstalled."
uninstall_pkg	=	"Uninstall {0}"
uninstall_pkg_fail	=	"Failed to uninstall "{0}". {1}"
uninstall_wizard_confirm_description	=	"Delete the items listed above when uninstalling the package"
uninstall_wizard_keep_description	=	"{0} will not be deleted from your _OSNAME_ when the package is uninstalled."
uninstall_wizard_page_description	=	"Package Center will uninstall the package from your _OSNAME_. Check if you want to delete the following items along with the package. Please note that they cannot be restored once deleted."
uninstall_wizard_title	=	"Uninstall {0}"
unsupport_auto_update	=	"Auto-update not supported: {0}"
unsupport_volume_move	=	"Volume move not supported: {0}"
update_all	=	"Update All"
update_and_volume_setting	=	"Update & Volume Settings"
update_channel	=	"Beta"
update_channel_beta_yes	=	"Yes, I want to see beta versions!"
update_channel_desc	=	"Beta versions allow you to try out brand new features of Synology packages before their official release, but they are not recommended to use for commercial purposes."
update_pkg	=	"Update {0}"
update_setting	=	"Update policy"
upgradable	=	"Update"
upgrade_fail	=	"Failed to update."
upgrade_ie_browser	=	"Please upgrade to the latest version of Internet Explorer browser because of security concerns."
upgrade_one_package	=	""{0}" is ready for update. {1}{2}{3}"
upgrade_one_package_noti_link	=	"{0} package is ready for update. Click {1}here{2} to take a look."
upgrade_operation_desc	=	"Package Center will automatically perform the following operations when {0} is updated."
upgrade_packages	=	"{0} packages are ready for update. {1}{2}{3}"
upgrade_packages_noti_link	=	"{0} packages are ready for update. Click {1}here{2} to take a look."
upgrade_pkg_completed	=	""{0}" is successfully updated. Click "Run" to activate the package service now. {1} {2}"
upgrade_pkg_fail	=	"Failed to update "{0}". {1}"
upgrade_start_pkg_completed	=	""{0}" is successfully updated. {1} {2}"
upgrade_start_success	=	"This package is updated and ready to use."
upgrade_title	=	"Package Update"
upgrading	=	"Updating..."
user_data_collection	=	"User Data Collection"
verify_pkg_fail	=	"Failed to verify "{0}". {1}"
version_bigger	=	"{0} (any version later than {1})"
version_bigger_equal	=	"{0} version {1} or later"
version_equal	=	"{0} version {1}"
version_less	=	"{0} (any version earlier than {1})"
version_less_equal	=	"{0} version {1} or earlier"
version_less_than_limit	=	"This package version {0} is not compatible with your _DISKSTATION_. Upload version {1} or later instead."
version_less_than_limit_no_new	=	"This package version {0} is not compatible with your _DISKSTATION_."
wait_pgsql	=	"Upgrading database. Please try again later."
waiting	=	"Waiting..."
warn_delegate_user_cant_operate	=	"Only administrator accounts can perform this operation."
worm_share_not_supported	=	"Cannot select the WriteOnce shared folder for this package. Select another shared folder."

[plugin]
plugin_help	=	"Please see Help for more information on the features."
plugin_installation	=	"Please install the latest {@} suited for your operating system."
plugin_not_remind	=	"Don't show this again"

[port_fwd]
port_fwd_field_exceed_multiports	=	"Up to {0} public ports can be specified. A port range counts as two ports (e.g. 5001-6000,6003 counts as three ports.)"
port_fwd_ip_err	=	"Please input the correct IP address"
port_fwd_port_err	=	"Please input the correct port number"
port_fwd_protocol	=	"Protocol"
port_fwd_service	=	"Service"
port_fwd_source_port	=	"Public Port"
port_fwd_target_ip	=	"Private IP Address"
port_fwd_target_port	=	"Private Port"

[poweroff]
PoweroffFailDueToBackup	=	"Please check whether the scheduled backup time is too close to the scheduled shutdown time."
poweroff_backup_task	=	"Performing backup tasks"
poweroff_ddsm_installing	=	"Updating / Restoring / Installing DDSM"
poweroff_ddsm_running	=	"DDSM is running on this server"
poweroff_ddsm_updating	=	"Updating/Restoring DDSM"
poweroff_iscsi_lun_busy	=	"Running tasks on LUN"
poweroff_package_manager_busy	=	"(Un)installing packages"
poweroff_pgsql_upgrading	=	"Upgrading system database"
poweroff_share_is_restoring	=	"Restoring the shared folder"

[pppoe]
error_empty_doublecheckpassword	=	"Please enter the password again."
error_empty_password	=	"Empty Password"
error_empty_username	=	"Empty User Name"
error_password	=	"Inconsistent Password"
pppoe_DNS	=	"DNS"
pppoe_IP	=	"IP address"
pppoe_auto_reconnect	=	"Reconnect automatically after the connection lost"
pppoe_check	=	"Enable PPPoE connection"
pppoe_close_guest	=	"For the security issue, it will close guest account after starting PPPoE connection."
pppoe_connect	=	"Connect"
pppoe_connected	=	"Connected"
pppoe_connecting	=	"Connecting"
pppoe_connection_failed	=	"PPPoE connection failed"
pppoe_disconnect	=	"Disconnect"
pppoe_disconnect_fail	=	"PPPoE disconnection failed."
pppoe_disconnected	=	"Unconnected"
pppoe_error	=	"Wrong User name/Password"
pppoe_firewall_block_admin_client	=	"Cannot enable the firewall rules because your current connection is not allowed in the rules. To enable the firewall rules, go to <b>Control Panel</b> > <b>Security</b> > <b>Firewall</b> and make sure that no rule will block your current connection."
pppoe_firewall_enable	=	"For the security issue, you are recommended to allow only specific services to be accessed through the PPPoE interface. Do you want to change the firewall settings?"
pppoe_firewall_policy_change	=	"For the security issue, you are recommended to change your firewall default policy to "deny all" and allow only specific services via the PPPoE interface. Do you want to change the firewall settings?"
pppoe_get_setting_fail	=	"Failed to get PPPoE settings."
pppoe_intr	=	"Enable PPPoE to directly connect to the Internet."
pppoe_mask	=	"Subnet mask"
pppoe_no_interface_available	=	"No PPPoE interface is availabe."
pppoe_password	=	"Password"
pppoe_password_doublecheck	=	"Confirm password"
pppoe_service_start_fail	=	"Failed to start PPPoE service."
pppoe_service_stop_fail	=	"Failed to stop PPPoE service."
pppoe_set_setting_fail	=	"Failed to set PPPoE settings."
pppoe_status	=	"Status"
pppoe_title	=	"PPPoE Setting"
pppoe_username	=	"Username"
pppoe_warning	=	"System will disconnect and then reconnect if changing user name/password. Are you sure?"
system_busy	=	"System busy."

[property]
error_invalid_domain_group	=	"Failed to change user group. Not a valid Windows domain group."
error_invalid_domain_user	=	"Failed to change owner. Not a valid Windows domain user."
error_save_property	=	"Failed to save properties."
privilege_execute	=	"Execute"
privilege_others	=	"Others"
privilege_read	=	"Read"
privilege_recursive	=	"Apply to this folder, sub-folders and files"
privilege_write	=	"Write"

[pushservice]
add_device_title	=	"Pair Device"
add_http_body	=	"Please enter the required parameter in the HTTP request body according to the service provider's API documents."
add_http_header	=	"Please enter the required parameter into the HTTP request header according to the service provider's API documents."
add_new_field	=	"Add Field"
add_service	=	"Set Up"
add_webhook	=	"Add Webhook"
browser_fieldset	=	"Browser Push Service"
browser_setup_prefix	=	"Push service will send you notifications through web browser. To set it up, click "Pair Now" to pair the current browser with your _DISKSTATION_."
browser_status	=	"Status"
browser_status_paired	=	"Paired"
browser_status_unpaired	=	"Unpaired"
chat	=	"Synology Chat"
chat_desc	=	"Integrate with Synology Chat to post messages via an incoming webhook"
custom	=	"Custom"
custom_desc	=	"Integrate with other applications to post messages"
default_prefix	=	"A new system event occurred on your %HOSTNAME% on %DATE% at %TIME%."
delete_webhook_desc	=	"If you remove this webhook, your webhook recipient will no longer receive any DSM notifications."
delete_webhook_title	=	"Are you sure you want to remove this webhook and its settings?"
edit_chat	=	"Edit Chat Webhook"
edit_custom	=	"Edit Other Application Providers' Webhooks"
edit_ifttt	=	"Edit IFTTT webhook"
empty_title	=	"No push service set up"
enable_browser_push	=	"Pair"
enable_browser_push_tip	=	"Supported on Chrome (35 or later) and Safari (OS X v10.9 or later)."
error_msn_account	=	"Please check if the Windows Live Messenger account you entered is valid."
error_server_connet	=	"Failed to connect to Synology's push service server. Please check your network connection or try again later."
error_skype_account	=	"Please check if the Skype account you entered is valid."
error_update_ds_info	=	"Failed to forward _DISKSTATION_ information to push service server."
error_update_msn_account	=	"Failed to forward Windows Live Messenger account(s) to push service server."
error_update_msnbot_busy	=	"Synology's Windows Live Messenger push service is busy."
error_update_msnbot_unready	=	"Synology's Windows Live Messenger push service is currently unavailable."
error_update_skype_account	=	"Failed to forward Skype account(s) to push service server."
error_update_skypebot_busy	=	"Synology's Skype push service is busy."
error_update_skypebot_unready	=	"Synology's Skype push service is currently unavailable."
header_err_content_type_invalid	=	"The HTTP request parameter you entered is not supported. If you wish to use "Content-Type" for "Parameter", please enter one of the following in the "Value" field:<br><ul><li>application/x-www-form-urlencoded</li><li>multipart/form-data</li><li>application/json</li><li>text/xml</li></ul>"
ifttt	=	"IFTTT"
ifttt_desc	=	"Integrate notification service with extending applications via IFTTT to receive messages via the applications."
learn_more_note	=	"For more information on how to set up a webhook, please refer to {0}this article{1}."
manage_no_pair_alert	=	"No paired devices"
manage_paired_title	=	"Manage Paired Devices"
manage_webhook	=	"Manage Webhooks"
mobile_ds_file_version	=	"DS finder Version"
mobile_fieldset	=	"Mobile Push Service"
mobile_model	=	"Model Name"
mobile_setup_prefix	=	"Push service will send you notifications through DS finder. To set it up, follow the instruction:"
mobile_setup_step_one	=	"1. Scan the QR code below to install and launch DS finder."
mobile_setup_step_two	=	"2. Toggle to enable Push Notification in DS finder."
mobile_version	=	"Firmware Version"
note_for_add_contact	=	"Please sign in to your Windows Live Messenger/Skype to accept friend invitation from Synology to receive instant messaging notifications."
prefix	=	"Subject"
provider_description	=	"Webhook provider description"
provider_name	=	"Provider name"
pushservice_account_limit	=	"You can enter up to ten accounts separated by ";"."
pushservice_account_num_exceed	=	"The number of accounts exceeds the limit."
pushservice_account_the_same	=	"Please do not enter duplicate accounts."
pushservice_desc	=	"Enable the notification service to receive messages via mobile devices or browsers when system statuses are updated or system errors occur."
pushservice_manage_mobile_device	=	"Manage Devices"
pushservice_mobile	=	"Push Service"
pushservice_mobile_desc	=	"Enable mobile notification service to receive real-time notifications of the events you select at "Main Menu" > "Control Panel" > "Notification" > "Advanced"."
pushservice_mobile_enable	=	"Enable mobile device notifications"
pushservice_mobile_hint	=	"Please install DS finder to add this _DISKSTATION_ to the "Favorite" list on your mobile device."
pushservice_msn	=	"MSN"
pushservice_msn_account	=	"Windows Live Messenger account"
pushservice_msn_bot_name	=	"Paired Windows Live Messenger account"
pushservice_msn_desc	=	"Enable Windows Live Messenger notification service to receive real-time notifications of the events you select at "Main Menu" > "Control Panel" > "Notification" > "Advanced"."
pushservice_msn_enable	=	"Enable Windows Live Messenger notifications"
pushservice_send_test_notification	=	"Send Test Message"
pushservice_skype	=	"Skype"
pushservice_skype_account	=	"Skype account"
pushservice_skype_bot_name	=	"Paired Skype account"
pushservice_skype_desc	=	"Enable Skype notification service to receive real-time notifications of the events you select at "Main Menu" > "Control Panel" > "Notification" > "Advanced"."
pushservice_skype_enable	=	"Enable Skype notifications"
pushservice_test_no_paired	=	"No paired devices. Please pair one first before sending a test message."
pushservice_test_notification_sent	=	"A test message has been sent. If you did not receive it, please check your settings again."
pushservice_unpair_all_mobile_device	=	"Unpair all"
pushservice_unpair_device	=	"Unpair"
select_provider_type	=	"Select an application webhook provider"
skype_account_rule	=	"Skype Name must have between 6 and 32 characters. It must start with a letter and can contain only letters, numbers, '.', ',' ,'-' and '_'."
subject_prefix	=	"Subject"
tab_http_request	=	"HTTP Request"
tab_parameter	=	"Parameter Type"
tab_provider	=	"Provider"
test_mail_alert	=	"Please apply the changed settings first before clicking <b>Send a test notification</b>."
type	=	"Type"
type_browser	=	"Browser"
type_device	=	"Device"
url_err_need_message_content	=	"Please set one of the parameters to "Message Content"."
url_param_content	=	"Message Content"
value3_opt	=	"value3 (optional)"
webhook_desc	=	"Receive notifications via webhooks when system status changes or errors occur."
webhook_title	=	"Application Webhooks"
webhook_url	=	"Webhook URL"

[qrlogin]
appname_chat	=	"Chat"
appname_drive	=	"Drive"
appname_dsfinder	=	"DS finder"
appname_moments	=	"Moments"
download_desc	=	"Scan the QR code and download {appname} now!"
download_goto_download_center	=	"For Android users, download the app at Download Center."
err_failed_read_sa	=	"Failed to load Synology Account information"
feature_desc	=	"Enabling QR code login allows you to sign in to your Synology NAS and other services via {0}, without the need to enter your device's address and credentials."
note_sa_logined	=	"For security reasons, please sign in to Synology apps using HTTPS protocol."
note_sa_logouted	=	"To enable QR code login, please sign in to your Synology Account first."
pkg_desc_disabled	=	"Enable log in {pkgname} by QR code"
pkg_desc_enabled	=	"Use {applink} to sign in to {pkgname}"
pkglist_pkg_header	=	"Services Supported"
term_ps_checkbox	=	"I acknowledge the Synology QR Code Login Privacy Statement."
term_ps_subtitle	=	"Before continuing, you will need to read and acknowledge the Synology QR Code Login Privacy Statement."
term_ps_title	=	"Synology QR Code Login Privacy Statement"
term_tos_checkbox	=	"I have read and agree to the Synology QR Code Login Terms of Service."
term_tos_subtitle	=	"Before continuing, you will need to read and acknowledge the Synology Account Terms of Service."
welcome_desc	=	"QR code login has been enabled. Download the corresponding apps to start the simple authentication process on {0}."
welcome_title	=	"Almost Done"

[rcpower]
action	=	"Action"
add_task	=	"Add Schedule"
beep_desc	=	"Beep when the following situations occur:"
edit_task	=	"Edit Schedule"
power_schedule	=	"Power Schedule"
powermgr_intro	=	""
rcfancontrol	=	"Fan Control"
rcfancontrol_cool	=	"Cool mode"
rcfancontrol_cool_desc	=	"Fan operates at higher speed, keeping the system cooler, but producing more noise."
rcfancontrol_desc	=	"Fan Speed Mode"
rcfancontrol_ext_nic_desc	=	"When network interface cards are installed on your _DISKSTATION_, Fan Speed Mode will be limited."
rcfancontrol_full	=	"Full-speed mode"
rcfancontrol_full_desc	=	"Fan operates at full speed, keeping the system cooler, but producing more noise."
rcfancontrol_high	=	"3.5" hard disk mode"
rcfancontrol_low	=	"2.5" hard disk mode"
rcfancontrol_low_power	=	"Low-power mode"
rcfancontrol_low_power_desc	=	"Fan operates at lower speed, producing less noise, but the system might become warmer. Fan will stop when the system is cool."
rcfancontrol_mode_tip	=	"The fan automatically adjusts speed when the system temperature increases."
rcfancontrol_quiet	=	"Quiet mode"
rcfancontrol_quiet_desc	=	"Fan operates at lower speed, producing less noise, but the system might become warmer."
rcpower_config	=	"Restart automatically when power supply issue is fixed"
rcpower_title	=	"Power Recovery"
schpower_legend	=	"Schedule"
schpoweroff_enable	=	"Enable scheduled power off"
schpoweroff_note	=	"System will not be able to shut down if there is another scheduled task running at the same time."
schpoweron_enable	=	"Enable scheduled power on"
schpoweron_note	=	"The system will enable the feature "Restart automatically when power supply issue is fixed."  If you want to disable this feature, please go to Hardware & Power > General > Power Recovery."
trigger_time	=	"Trigger time"
wol_note	=	"With the feature of WOL enabled, the system will enable the feature "Restart automatically when power supply issue is fixed.""

[relayservcie]
myds_account_created_msg	=	"Synology Account successfully created!"
pkg_description	=	"QuickConnect allows client applications to connect to your Synology NAS via the Internet without setting up port forwarding rules. It can also work with Synology-developed packages, such as File Station, Surveillance Station, Synology Drive, Synology Photos, and mobile applications."

[relayservice]
adv_setting	=	"Advanced"
adv_setting_description	=	"Configure the permission settings for applications and services."
adv_tab_quickconnect_disabled_msg	=	"Enable {0} first to edit the advanced settings."
alias_change_machine_message	=	"The specified QuickConnect ID is currently used by another Synology product. Do you want to set the QuickConnect ID to this _DISKSTATION_?"
alias_description	=	"Now give your _DISKSTATION_ a QuickConnect ID. Make it easy to remember so that you and your friends can connect from anywhere with any device."
alias_new_restriction	=	"With _OSNAME_ 5.0, your QuickConnect ID cannot include underscores (_) or exceed 63 English characters. If QuickConnect is disabled, you will not be able to register the current QuickConnect ID again."
browser_description	=	"On web browsers, use the links below:"
bypass_real_name_valid	=	"You are trying to use the QuickConnect service from China. If your _DISKSTATION_ is not located in China, {0}modify domain name server (DNS) settings{1} and enable QuickConnect again."
certificate_status_fail	=	"Not obtained"
certificate_status_loading	=	"Configuring..."
certificate_status_success	=	"Obtained"
cms_upgrade_msg	=	"To enable advanced QuickConnect settings, please update this _DISKSTATION_ to the latest version of _OSNAME_."
dsm_https_service	=	"_OSNAME_ HTTPS (in _OSNAME_ Settings)"
enable_portforward	=	"Automatically create port forwarding rules"
enable_portforward_tip	=	"If your router passes the compatibility test, port forwarding rules will automatically be created for QuickConnect."
enable_quickconnect	=	"Enable QuickConnect"
enable_service	=	"Enable"
error_alias_server_internal	=	"Oops... An error occurred with the QuickConnect server. Please try again later."
error_alias_used_in_your_own	=	"This QuickConnect ID is currently used by another Synology product."
error_myds_not_logged_in	=	"Synology Account was signed out. Please sign in and register the QuickConnect service again."
file_downloading	=	"Download will begin in a moment..."
include_name_cloud	=	"including desktop utilities and mobile apps of Synology Drive"
inside_tunnel_msg	=	"Cannot modify the settings when connecting _OSNAME_ via QuickConnect relay service. To modify settings, use another connection method."
inside_tunnel_msg_for_router	=	"The settings on this page cannot be modified, because you are currently logged into _OSNAME_ via QuickConnect."
login_for_quickconnect	=	"To enable QuickConnect, please sign in to your Synology Account or sign up for one."
misc	=	"Options"
mobile_apps	=	"Mobile apps"
myds_account_created_msg	=	"Synology Account successfully created!"
myds_exceed_max_register_error	=	"This _DISKSTATION_ has exceeded its daily number of new Synology Accounts. Please try again tomorrow."
myds_register_description	=	"With a Synology Account, you can register for free domain names from Synology, and use QuickConnect to connect to the _DISKSTATION_ etc."
myds_server_internal_error	=	"Oops... An error occurred with the Synology Account server. Please try again later."
name_cloud	=	"Cloud Station utilities & DS cloud"
name_dsm_portal	=	"_OSNAME_"
name_file_sharing	=	"File sharing"
name_mobile_app	=	"Mobile Applications (DS audio, DS cam, DS file, DS finder, DS get, DS note, DS video, Synology Chat, Synology Drive, Synology MailPlus, Synology Photos, and Synology Secure SignIn)"
name_mobile_app_for_nvr	=	"Mobile Applications (DS file, DS cam, DS finder)"
name_mobile_app_for_router	=	"Mobile Applications (DS download, DS file, DS router)"
name_photo_portal	=	"Photo Station"
name_photostation	=	"DS photo"
need_real_name_valid	=	"We have detected that you try to use the QuickConnect service in China. To continue the service, please sign in to <a href="https://sy.to/globalaccountlogin" target="_blank" rel="noopener noreferrer">account.synology.com</a> to complete the phone verification process, or create a new account on the <a href="https://sy.to/cnaccountlogin" target="_blank" rel="noopener noreferrer">account.synology.cn</a> website. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Service_Application/bind_phone_number_to_Synology_Account" target="_blank" rel="noopener noreferrer">Learn more</a>"
no_permission_select_warning	=	"To use QuickConnect, please select at least one application/service."
no_service_enabled	=	"No services enabled"
package_not_enabled	=	"The QuickConnect package is stopped. Go to Package Center to run the package."
package_not_supported	=	"Sorry, this package cannot be accessed when connected via QuickConnect."
permission	=	"Permission"
permission_desc	=	"Select at least one application/service to allow access via QuickConnect."
privacy_note	=	"{0}Note:{1} To secure your QuickConnect connection, we will pass your QuickConnect domain to Let’s Encrypt for domain registration. Please see our <a class="link-font" target="_blank" href="https://www.synology.com/company/legal/privacy">Privacy Statement</a> for details."
quickconnect_confirm_desc	=	"It will take a few seconds to set up your QuickConnect service. You cannot perform other operations until the setup is complete."
quickconnect_confirm_desc_smartdns	=	"It will take a while to change your QuickConnect ID. You cannot perform other operations until the setup is complete. The webpage will be refreshed later, and you will be able to access _OSNAME_ with your new QuickConnect ID, and have to sign in to _OSNAME_ again.<br><br>Are you sure you want to change your QuickConnect ID?"
quickconnect_confirm_title	=	"Set up QuickConnect"
quickconnect_desc	=	"QuickConnect makes it easy to connect to your _DISKSTATION_ from anywhere. Just enable QuickConnect below and register for a Synology Account."
quickconnect_disable_confirm_desc	=	"You are currently signed in to _OSNAME_ via QuickConnect. If you disable QuickConnect, the webpage will be refreshed, and you will have to sign in to _OSNAME_ again. Are you sure you want to disable QuickConnect?"
quickconnect_err_network_without_failover_cn	=	"Unable to perform this operation, possibly because the network connection is unstable or the system is busy. Please try again later."
redirecting	=	"Redirecting. Please wait."
relay_enabled	=	"Enable QuickConnect relay service"
relay_enabled_desc	=	"Your QuickConnect connection will be relayed via Synology Relay Server when you cannot directly access the _DISKSTATION_ via QuickConnect."
relayservice_connected	=	"Connected"
relayservice_desc_short	=	"Allows applications to connect to your _DISKSTATION_ via the Internet without configuring port forwarding rules on your router."
relayservice_direct_connect	=	"Connected"
relayservice_disconnected	=	"QuickConnect disabled"
relayservice_ds_audio	=	"DS audio"
relayservice_ds_photo	=	"DS photo"
relayservice_dsfile	=	"DS file"
relayservice_dsfile_https	=	"DS file (HTTPS)"
relayservice_err_911	=	"QuickConnect Server is under maintenance. Please try again later."
relayservice_err_alias_in_use	=	"{0} is already in use."
relayservice_err_alias_not_found	=	"The customized ID has expired due to long-term inactivity of your QuickConnect ID."
relayservice_err_bad_dns	=	"Domain name can't be resolved. Please change your DNS server address to 8.8.8.8 (114.114.114.114 for China region users) and try again."
relayservice_err_config	=	"Error ({0})"
relayservice_err_lock	=	"Error ({0})"
relayservice_err_network	=	"Network error occurred. Please check your network settings."
relayservice_err_not_support	=	"Service error occurred. Please update your _OSNAME_ to the latest version."
relayservice_err_register	=	"Error ({0})"
relayservice_err_resolv	=	"Network error occurred. Please check your DNS and network settings."
relayservice_err_server_busy	=	"Error ({0})"
relayservice_err_server_limit	=	"The number of QuickConnect service connections has reached the limit. Please try again later."
relayservice_err_server_rate_limit	=	"QuickConnect server is busy. Please try again after 5 minutes."
relayservice_err_unknown	=	"Error"
relayservice_filesharing_https	=	"File Sharing"
relayservice_login	=	"Registering..."
relayservice_not_running_service	=	"Please enable {0} and try again."
relayservice_serverid_change_msg	=	"Your QuickConnect ID has been renewed. Please reconfigure relevant client applications with the new QuickConnect ID."
relayservice_serverid_change_title	=	"System Event"
relayservice_starting	=	"Initializing..."
relayservice_stop	=	"Disconnecting..."
relayservice_title	=	"QuickConnect"
relayservice_webdavs_https	=	"WebDAV (HTTPS)"
settings_csrv	=	"QuickConnect Info"
status	=	"Status"
syno_mobile_apps	=	"On mobile devices and computer clients, enter the QuickConnect ID below on the login screen:"
syno_mobile_apps_only	=	"On mobile devices, enter the QuickConnect ID below on the login screen:"
title_alias_clear_notice	=	"* To clear the customized ID, please clear the data in the above field."
title_svrid	=	"QuickConnect ID"
unavailable_file	=	"Unable to download file(s)."
violation	=	"Your QuickConnect has been suspended. Please sign in to <a class="link-font" target="_blank" href="https://account.synology.com">Synology Account</a> to complete the verification process."
web_browsers	=	"Web browsers"
welcome_message	=	"Connect to your _DISKSTATION_ anywhere"
welcome_no_alias	=	"Access your _DISKSTATION_ using the information below. (For even more features, please register a Synology Account.)"
window_title_register_myds	=	"Register Synology Account"

[remote_key]
add_cert_button	=	"Add Certificate"
add_client_cert_title	=	"Add Client Certificate"
ca_optional	=	"Certificate authority"
ca_tips	=	"This field is required if you are using a self-signed certificate."
cert_status	=	"Permission"
client_cert	=	"Client certificate"
client_client_cert_validation	=	"Client certificate expiration"
client_conn_server	=	"Connected Server"
client_conn_server_ip	=	"Server IP"
client_conn_server_name	=	"Hostname"
client_conn_server_port	=	"Port"
client_edit_server_button	=	"Edit"
client_enable	=	"Set as remote key client"
client_last_conn_status	=	"Last connection"
client_name	=	"Client Name"
client_section_desc	=	"Connect to another _DISKSTATION_ to securely store your encryption keys of encrypted volumes. Add your certificate to the remote key server before storing your keys. {0}Learn more{1}"
client_section_title	=	"Remote Key Client"
client_server_cert_validation	=	"Server certificate expiration"
client_test_conn_button	=	"Test Connection"
desc_optional	=	"Description"
description	=	"Description"
description_optional	=	"Description (optional)"
dialog_delete_cert_desc	=	"The remote key client will be disconnected after you delete the certificate."
dialog_delete_cert_title	=	"Delete %certificate_name%?"
dialog_erase_all_data_button	=	"Erase All Data"
dialog_erase_all_data_desc	=	"All the stored keys and connected clients of the remote key server will be deleted. The deleted settings cannot be recovered. Are you sure you want to continue?"
dialog_erase_all_data_title	=	"Reset remote key server settings"
dialog_error_conn_failed	=	"Cannot connect to the server. Make sure that the entered IP address, port, and certificate are correct."
dialog_error_loop	=	"The entered server has already set this _DISKSTATION_ as the remote key server. Choose another server to connect to."
dialog_invalid_cert	=	"Invalid certificate. Use another certificate."
dialog_no_volume	=	"There are no volumes to store the encryption key. Do you want to launch Storage Manager to create a volume now?"
dialog_select_enc_volume	=	"You have selected an encrypted volume. The client won't be able to access the encrypted key if this volume is locked."
dialog_transfer_desc	=	"You have changed the key store location. The system will move the settings and encryption keys to {Volume}. Are you sure you want to continue?"
dialog_transfer_title	=	"Transfer to {Volume}?"
dialog_trust_certification	=	"Trust Certificate"
dialog_uncheck_button	=	"Uncheck"
dialog_uncheck_desc	=	"You have set Remote Key Server as your Volume Password Vault store location. You will not be able to access Volume Password Vault when you uncheck. Are you sure want to uncheck?"
dialog_uncheck_title	=	"Uncheck set as Remote Key Client?"
edit_client_cert	=	"Client Certificate"
edit_client_cert_title	=	"Edit Client Certificate"
edit_server_title	=	"Edit Remote Key Server"
erase_data_feedback	=	"Data has been erased"
expired	=	"Expired"
key_viewer_tab_title	=	"Key Viewer"
kmip_tab_title	=	"KMIP"
last_retrieve_time	=	"Last Retrieve Time"
last_update_time	=	"Last Update Time"
revoked	=	"Revoked"
server_auth_version	=	"Authentication version"
server_conn_of_client_button	=	"Manage"
server_conn_of_client_desc	=	"Add the client's certificate to allow the connection between the client and this _DISKSTATION_. You can also view and manage the connected clients."
server_conn_of_client_title	=	"Manage Client Connection"
server_enable	=	"Set as remote key server"
server_host_name	=	"Host name"
server_ip	=	"IP"
server_key_location	=	"Key store location"
server_kmip_version	=	"KMIP version"
server_port	=	"Port"
server_reset_button	=	"Erase All Data"
server_reset_desc	=	"You can delete all of the settings and data, including connected clients and stored keys."
server_reset_title	=	"Reset"
server_section_desc	=	"Set this _DISKSTATION_ as a remote key server to safely store the encryption keys of encrypted volumes from clients. {0}Learn more{1}"
server_section_title	=	"Remote Key Server"
status_grant	=	"Grant"
status_revoke	=	"Revoke"
success_on	=	"Successful {success_datetime}"
suggestion	=	"Suggestion"
suggestion_renew	=	"Go to the client device and generate a new certificate. Then, renew the certificate on this _DISKSTATION_."
synology_key_server_setting_button	=	"Settings"
synology_key_server_setting_title	=	"Remote Key Server Settings"
tab_title	=	"Remote Key"
target_volume	=	"Target"
trust	=	"Trust"
trusted_client_tab_title	=	"Trusted Client"
update_client_cert	=	"Update client certificate"
warn_cert_exp_date	=	"The expiration date of selected certificate is less than 3 months. Please renew the certificate before the expiration date."
warn_stop_remote_key_client	=	"Cannot disable this option. Your Encryption Key Vault location is a remote key server. To change the vault location, go to Storage Manager > Storage > Global Settings and select a different location."
warn_stop_remote_key_server	=	"There are client certificates and volume encryption keys exist. Please erase all the data before stop the service of Synology Key Server."

[report]
analyze_profile_now	=	"Analyze this report task"
analyzer_profile	=	"Report Profile"
btn_hide_pass_item	=	"Hide passed items"
btn_show_all_item	=	"Show all events"
btn_show_latest_item	=	"Show latest events only"
btn_show_pass_item	=	"Show all items"
button_global_setting	=	"Settings"
button_profile	=	"Report Task"
button_profile_create	=	"Create Report Task"
button_profile_delete	=	"Delete Report Task"
button_profile_edit	=	"Edit Report Task"
button_report	=	"Report"
button_report_create_now	=	"Generate reports now"
button_report_old_get	=	"View historical reports"
confirm_move_old_report	=	"Do you want to move the data of historical reports to the new location?"
confirm_select_no_share	=	"You did not select any shared folder so all shared folders will be included instead. Do you want to continue?"
consumed_time	=	"Time Consumed"
daily_report	=	"Daily Report"
day_every	=	"Daily"
edit_tab_basic	=	"General"
edit_tab_options	=	"Options"
edit_tab_report	=	"Report"
edit_tab_schedule	=	"Schedule"
err_dest_share_not_exist	=	"The path to save reports does not exist."
exclude_recycle	=	"Exclude recycle bins from the report"
filetable_delete	=	"Delete selected files"
form_create_now	=	"Generate reports now"
form_day	=	"Day"
form_duplicate_compare_filename	=	"Compare duplicate files by file names"
form_duplicate_compare_mtime	=	"Compare duplicate files by modified time"
form_duplicate_limit_number	=	"Max number of duplicate files"
form_history_volume_usage	=	"Include historical data of volume usage"
form_hour	=	"Hour"
form_minute	=	"Minute"
form_schedule_time	=	"Generate reports according to a schedule"
form_schedule_time_volume_history	=	"Collect volume usage history according to a schedule"
form_specify_all_share	=	"Include all shared folders"
form_specify_duplicate_file_full_mach	=	"Find confirmed duplicate files"
form_specify_share	=	"Select shared folders"
form_specify_some_share	=	"Select shared folders"
form_specify_user	=	"List files owned by these users by file group"
generated_at	=	"Report generated on"
include_newshare	=	"Automatically include all existing and future shared folders"
monthly_report	=	"Monthly Report"
msg_config_error	=	"An error occurred while generating the usage report. Please check the configuration of your report."
msg_cost_more_time	=	"Takes more time"
msg_create_report_fail	=	"An error occurred while generating the usage report."
msg_moving_reports	=	"Moving reports..."
msg_write_data_error	=	"A data write error occurred while generating the usage report."
no_report_found	=	"No matches found"
no_schedule	=	"No schedule set"
reportUI_cannot_estimate	=	"Not available"
reportUI_deleted_parenthesis	=	"(removed)"
reportUI_download_csv	=	"Download CSV"
reportUI_duplicate_accurate_list	=	"Duplicates by MD5"
reportUI_duplicate_list	=	"Duplicate Files"
reportUI_file_status_removed	=	"Removed"
reportUI_file_type_audio	=	"Audio"
reportUI_file_type_document	=	"Documents"
reportUI_file_type_exe	=	"Executable files"
reportUI_file_type_image	=	"Pictures"
reportUI_file_type_iso	=	"Disk Image files"
reportUI_file_type_other	=	"Other"
reportUI_file_type_video	=	"Videos"
reportUI_file_type_web	=	"Web pages"
reportUI_file_type_zip	=	"Zipped files"
reportUI_msgbox_ask_login	=	"Sorry, your login session has expired. Would you like to login again?"
reportUI_msgbox_title_info	=	"Information"
reportUI_quota_exceeded	=	"User disk quota exceeded."
reportUI_report_name	=	"Disk Usage Report"
reportUI_title_action	=	"Action"
reportUI_title_all_user	=	"All Users"
reportUI_title_day_to_full	=	"Days to Full"
reportUI_title_file_count	=	"File Count"
reportUI_title_file_type	=	"File Type"
reportUI_title_free	=	"Free"
reportUI_title_group	=	"Group"
reportUI_title_modify_time	=	"Modified Time"
reportUI_title_name_time	=	"Device name:<BR>Generated at:"
reportUI_title_percent	=	"Percentage"
reportUI_title_share	=	"Shared Folder"
reportUI_title_used	=	"Used"
reportUI_title_user_is	=	"User: "
reportUI_title_volume	=	"Volume"
report_duplicate_file	=	"Potential Duplicate Files"
report_file_group	=	"Files by File Group"
report_file_owner	=	"Files by Owner"
report_keyword_analyzer	=	"Analyzer"
report_laf	=	"Least Recently Accessed"
report_large_file	=	"Large Files"
report_location_error	=	"The location for saving reports has not been selected or is not available. Do you want to select a location now?"
report_lrm	=	"Least Recently Modified Files"
report_mmf	=	"Most Recently Modified"
report_mrm	=	"Most Recently Modified Files"
report_name	=	"Report"
report_quota_usage	=	"Quota Usage"
report_quota_usage_by_share	=	"Quota Usage by Shared Folder"
report_share_list	=	"Shared Folders"
report_title	=	"Storage Analyzer"
report_type	=	"Type"
report_volume_usage	=	"Volume Usage"
run_md5	=	"Run fine comparison (MD5) on all files"
schedule_report_name	=	"Disk Usage Report"
schedule_task_collect_desc	=	"Collect report data"
schedule_task_create_desc	=	"Generate disk usage report"
status_collect_data	=	"Processing"
status_fail	=	"Failed"
status_ready	=	"Ready"
status_running	=	"Running"
status_setting_all_share	=	"All shared folders"
status_success	=	"Successful"
storage_report_desc	=	"Create scheduled tasks to analyze volume usage and view usage reports."
summary	=	"Summary"
summary_enable_create_now	=	"Generate reports now"
summary_enable_schedule	=	"Enable Schedule"
title_edit	=	"Edit Report Task"
title_global_setting	=	"Settings"
title_location	=	"Save report to"
title_mail	=	"Email"
title_profile	=	"Report Task"
title_report	=	"Report"
title_report_date_range	=	"Date Range"
title_report_list	=	"Report List"
title_report_path	=	"Report Path"
title_report_type	=	"Report Type"
title_schedule	=	"Schedule"
title_share	=	"Shared Folder"
title_status	=	"Status"
title_type	=	"Type"
type_daily	=	"Daily"
type_monthly	=	"Monthly"
type_realtime	=	"Report of This Month"
wizard_option	=	"Configure Options"
wizard_option_desc	=	"You can include additional information about specific users, or narrow down the shared folders in the report."
wizard_profile	=	"Create Report Task"
wizard_profile_desc	=	"Enter basic information for the new report task."
wizard_report	=	"Select Report Types"
wizard_report_desc	=	"Choose the report types you want."
wizard_schedule	=	"Generate Reports according to a Schedule"
wizard_schedule_desc	=	"Specify a time for your _DISKSTATION_ to generate reports."
wizard_summary	=	"Confirm Settings"
wizard_summary_desc	=	"The wizard will apply the following settings. This process will take a few seconds."
wizard_title	=	"Storage Usage Report Wizard"
wizard_welcome	=	"Welcome to Storage Usage Report Wizard"
wizard_welcome_desc	=	"The wizard will assist you in creating a report task to generate usage reports."

[reset_admin]
admin_account	=	"Administrator account"
admin_account_tooltip	=	"For security reasons, the account "admin" will be disabled upon resetting this administrator's password. Learn more about what services/packages will be affected in <a class="link-font" href="https://www.synology.com/knowledgebase/DSM/tutorial/Management/services_affected_by_disable_admin" target="_blank">this article</a>."
reset_admin_desc	=	"Reset the password for your account. This password will replace the old one."
reset_admin_title	=	"Reset Password"
reset_otp_note	=	"The 2-factor authentication settings will be disabled when you reset your password. Please reconfigure 2-factor authentication after you sign in."

[router_common]
about_desc	=	"_OSNAME_ is the dedicated operating system for _DISKSTATION_, developed and owned by <a href="http://www.synology.com" target="_blank">Synology Inc.</a> _OSNAME_ unleashes superior wireless connectivity of _DISKSTATION_ and, with add-on packages, transforms it into a versatile multimedia and file sharing center."
advanced_options	=	"Advanced options"
basic_options	=	"Basic options"
country_desc	=	"Please select your current location to ensure full functionality of your {0}."
device_units	=	"unit(s)"
dhcp_range_conflict_err	=	"The DHCP range of interfaces {0} and {1} are in conflict."
leaf_administration	=	"Administration"
led	=	"LED"
led_desc	=	"You can choose to use only the Power LED or all the LEDs on your _DISKSTATION_ to suit your environment."
led_mode_normal	=	"All LEDs on"
led_mode_schedule	=	"Customize LED schedule"
led_mode_sleep	=	"Only STATUS LED on"
more_options	=	"Advanced options"
net_loopback	=	"Enable NAT Loopback"
nsm_settings	=	"_OSNAME_ Settings"
operation_mode	=	"Operation Modes"
redirect_netbios	=	"Please wait for 60 to 90 seconds for transition of operation mode. After mode transition, disable and re-enable the network interfaces of locally connected devices. Then you will be redirected to _OSNAME_. Make sure not to close/refresh this current page until completion."
redirect_progress	=	"You will be redirected to _OSNAME_ after the connection is recovered. Please wait and do not close or refresh this current page until completion.
"
redirect_topology_confirm	=	"After mode transition, do you want to keep your _DISKSTATION_ accessible via router.synology.com?"
router_app_name	=	"Network Center"

[router_connection]
conn_type	=	"Connection Type"
connection	=	"Connection"
connection_desc	=	"This is where you set up your Internet connection. Your connection type is defined by your networking environment. Consult your ISP if you require assistance."
extra_pppd_options	=	"Additional PPPD options"
isp_settings	=	"ISP Settings"
macclone_external_ip_warning	=	"Cannot clone MAC from external IP address, please do so in LAN."
pppoe_ac_name	=	"Access concentrator"
pppoe_acquire_ip	=	"Acquire Internet IP"
pppoe_auto_disconnect	=	"Auto-disconnect after idling"
pppoe_service_name	=	"Service name"
should_be_default_gw	=	"According to your settings, there is currently no gateway for Synology Router so the default gateway option has been automatically enabled."
vpn_dhcp_connection	=	"VPN+DHCP connection"
vpn_setting	=	"VPN settings"
wan_ip	=	"WAN IP"

[router_firewall]
dos_protection	=	"DoS Protection"
firewall_default_rule_name	=	"User-defined rule"
firewall_disable_bridge_mode	=	"Firewall rules cannot be modified in bridge mode. Please change modes and try again."
firewall_global_allow_alert	=	"Setting the default firewall policy to allow access makes your network more vulnerable to cyber threats. To strengthen your network security, set the default firewall policy to deny access."
firewall_max_rule_err	=	"You have reached the maximum number of firewall rules."
firewall_service_desc_dsm_http	=	"Management UI, File Station, Audio Station, Download Station"
firewall_service_desc_dsm_https	=	"Management UI, File Station, Audio Station, Download Station"
firewall_service_desc_ssh	=	"Encrypted terminal service (includes SFTP)"
firewall_vpn_passthrough_desc	=	"Please tick the option(s) according to the VPN protocol(s) used by the VPN clients so that the VPN client traffic can pass through your _DISKSTATION_."
vpnpassthrough	=	"VPN Pass-through"

[router_installer]
admin_title	=	"Set up the Administrator Account"
admin_username	=	"Username"
alert_confirmpass	=	"Passwords do not match. Please enter your password again."
ap_mode	=	"Wireless AP"
apply_setting_follow_step	=	"Follow the steps below"
apply_setting_reconnect_router	=	"Reconnect to <a href="http://router.synology.com" target="_blank">http://router.synology.com</a><br>Or<br>Launch <span class="highlight-font">DS router</span> on your mobile device"
apply_setting_reconnect_router_pc	=	"Laptop: Sign in to _OSNAME_ via {0} to manage all aspects of your _DISKSTATION_"
apply_setting_reconnect_wifi	=	"Reconnect to the new Wi-Fi SSID"
apply_setting_title	=	"Setup Completed"
dhcp_type	=	"Auto IP"
ds_router	=	"DS router"
empty_value	=	"{0} cannot be empty."
error_cookie_disabled	=	"Failed to load login information. Please make sure cookies are enabled in your browser."
error_setup_admin	=	"Failed to set up the administrator account."
error_setup_ethernet	=	"Failed to set up the Internet connection."
error_setup_topology	=	"Failed to set up the operation mode."
error_setup_wifi	=	"Failed to set up the Wi-Fi network."
error_ssid_too_long	=	"The name (SSID) is too long."
error_username_too_long	=	"The username length cannot exceed 64 characters."
external_access	=	"External access to _OSNAME_"
finish_title	=	"Congratulations! _DISKSTATION_ setup is now complete"
finish_using	=	"Launch _DISKSTATION_"
internet_connection_type	=	"Internet Connection"
internet_get_wanip	=	"Auto WAN IP"
internet_setup	=	"Set up Your Internet Connection"
invalid_field	=	"The field value is invalid."
launch_ds_router	=	"Mobile device: Launch {0} to manage your _DISKSTATION_ from everywhere"
min_password_length	=	"Enter at least 8 characters."
mobile_agree_eula	=	"By clicking Yes, you agree to the <a href="{0}" target="_blank" class="pathlink">End User License Agreement</a>."
mobile_finish_title	=	"Congratulations!<br>Your _DISKSTATION_ setup is complete"
mobile_through_wan	=	"You are now accessing the _DISKSTATION_ through the WAN port. To start the setup, we suggest you reconnect to this Wi-Fi SSID: {0}."
mobile_welcome_title	=	"Welcome to the _DISKSTATION_ Setup Wizard"
onoff_network_interface	=	"While applying the wireless AP mode, the system will try redirecting you to _OSNAME_ until success. During redirection, please disable and then enable this client device’s network interface."
pin_code_desc	=	"You are now accessing your _DISKSTATION_ through the WAN port. Please enter the PIN code on the bottom shell of your _DISKSTATION_ to start the setup."
pin_code_fieldlabel	=	"PIN Code"
pin_err_count	=	"The PIN code is invalid. Please enter the PIN code on the bottom shell of your _DISKSTATION_. Note: You have {0} times left to enter the PIN code."
pin_err_need_reboot	=	"You have reached the PIN entry limit. The _OSNAME_ Setup Wizard is now locked down. Please reboot your _DISKSTATION_ to restart the setup."
pppoe_type	=	"PPPoE"
progress_desc	=	"Your _DISKSTATION_ will be ready in 3 minutes.</br>Please do not shut down the system during the setup."
progress_title	=	"Setting up _DISKSTATION_..."
progressbar_internet	=	"Internet"
router_mode	=	"Wireless Router"
setup_operation_mode_title	=	"Set Up Your Operation Mode"
skip_this_step	=	"Skip this step"
static_type	=	"Manual IP"
tip_network_speed	=	"We've detected that your Ethernet speed is 10/100Mbps only. To ensure the highest performance, it is recommended upgrading your network cable to at least 1Gbps."
topology_notes_ap	=	"Bridge mode: All network interfaces (LAN, WAN, and WLAN) are bridged together, and connect to the Internet via another router."
topology_notes_router	=	"Router mode: The _DISKSTATION_'s WAN port connects to the Internet via a DSL/cable modem."
welcome_admin_agree_eula	=	"By clicking Next, you agree to the <a href="{0}" target="_blank" class="pathlink">End User License Agreement</a>."
welcome_title	=	"Link & share all possibilities"
wifi_device	=	"Wi-Fi device"
wifi_poweroff_error	=	"Wi-Fi is currently disabled. Before use, please press the Wi-Fi switch on your _DISKSTATION_ to enable Wi-Fi."
wifi_reconnect	=	"If you use the default Wi-Fi SSID (i.e. SynologyRouter) with a non-default password, you may have to apply the new password to reconnect."
wifi_setting	=	"Set up Your Wi-Fi Network"
wifi_suggestion	=	"In order to achieve the best wireless quality, please make sure there're no wireless devices around. "

[router_localnetwork]
change_ip_notify_content	=	"The subnet mask or gateway IP has been modified. You may need to reconnect wireless devices for your connection to work properly. For wired devices, you may need to unplug your network cable and plug it in again. Are you sure you want to proceed?"
change_ip_notify_title	=	" Local IP or subnet changed"
clientlist_and_reservation	=	"Client List & Reservation"
dhcp_broadcast_err	=	"The end IP address cannot be the same as the broadcast IP address."
dhcp_gateway_err	=	"DHCP IP addresses must be in the same subnet as the default gateway."
dhcp_range_err	=	"Start IP address cannot exceed end IP address."
igs_notify	=	"IGMP snooping is locked since it has no effect in this operation mode."
ip_gateway_diffrent_msg	=	"Your LAN IP and gateway IP are different, which may result in internet connection failure. Are you sure you want to proceed?"
lan	=	"LAN"
lan_wlan	=	"LAN/WLAN"
local_ip	=	"Local IP"
nat_enabled	=	"NAT"
subnet_conflict	=	"SRM has detected that your WAN subnet and LAN subnet overlap, and may cause you to lose Internet connection."
subnet_conflict_alert	=	"To maintain Internet connection, please switch your LAN to a different subnet."
subnet_conflict_notify	=	"To maintain Internet connection, please click this notification to go to Network Center > Local Network > General and switch your LAN to a different subnet."
subnet_switch	=	"Would you like SRM to switch your LAN to a different subnet to maintain Internet connection?"
use_host_dns	=	"Forward known DNS server"
wifi_2_4G	=	"Wi-Fi 2.4G"
wifi_5G	=	"Wi-Fi 5GHz"
wins_server	=	"WINS Server"

[router_networktools]
add_wol_device_title	=	"Joinable Devices for Wake on LAN"
application_title	=	"Network Tools"
application_title_desc	=	"Troubleshoot network connections and remotely wake up connected devices."
country	=	"Location"
destination	=	"Destination"
manual_add_cue	=	"Enter MAC address"
no_gps_info	=	"No GPS information."
no_internet_available	=	"No Internet available."
online_list	=	"Select device"
ping_prefer_ipv4	=	"If the resolved URL contains both IPv4 and IPv6 addresses, use IPv4."
ping_target_cue	=	"Target URL or IP"
ping_target_invalid	=	"Ping target is invalid or network is unreachable."
ping_timeout	=	"Ping has been terminated due to timeout to save CPU resources."
ping_title	=	"Ping"
reply_from	=	"Reply from"
round_trip	=	"Round trip"
saved_wol_device_title	=	"Connection List"
server	=	"Server"
time	=	"Time"
traceroute_check_network_connection_before_run	=	"Please connect to WAN before using traceroute tool"
traceroute_target_invalid	=	"Traceroute target is invalid or network is unreachable."
traceroute_title	=	"Traceroute"
wake_confirm_message	=	"Do you want to wake up the selected device? If it fails to be woken up, please check the corresponding device settings."
wake_up_now	=	"Wake up"
wol_over_qc_desc	=	"Enable WOL over QuickConnect"
wol_over_qc_tooltip	=	"This device supports WOL over QuickConnect."
wol_title	=	"Wake on LAN"

[router_notification]
mobile_ds_router_version	=	"DS router Version"
pushservice_mobile_hint	=	"Please make sure DS router is installed on your mobile device."

[router_otp_enforcement]
enforce_option_desc	=	"Enforce 2-factor authentication for all users"

[router_overview]
advanced_options	=	"Advanced Information"
ap_assoc_list_mac	=	"MAC Address"
ap_security_mode	=	"Security Mode"
connection_state	=	"Internet Connection"
connection_type	=	"Connection type"
cpu_and_memory	=	"CPU & Memory"
cpu_utilization	=	"CPU Usage"
empty_devicelist_desc	=	"Your devices are not connected to _DISKSTATION_. Please connect them via Wi-Fi or LAN."
info_cpu	=	"CPU"
info_memory	=	"Memory"
info_network	=	"Network"
load_average	=	"Load Average"
load_peak	=	"Load Peak"
local_network	=	"Local Network"
memory_buff	=	"Buffer"
memory_cached	=	"Cached"
memory_free	=	"Free"
memory_reserved	=	"Reserved"
memory_total	=	"Total"
memory_used	=	"Used"
memory_utilization	=	"Memory Usage"
more_information	=	"More information"
network_mode	=	"Network mode"
packets_rx	=	"Received (RX) packets"
packets_tx	=	"Transmitted (TX) packets"
route_dns	=	"DNS Server"
status_limit_connection	=	"Limited Connection"
tcpip_ipaddr	=	"IP Address"
time_15min	=	"Last 15 Minutes"
time_1min	=	"Last 1 Minute"
time_5min	=	"Last 5 Minutes"
wifi_24g	=	"Wi-Fi 2.4GHz"
wifi_5g	=	"Wi-Fi 5GHz"

[router_parental]
add_allowing_list	=	"Add to allow list"
allow_this_website	=	"Allow access to this website"
category_adult	=	"Adult"
category_advertising	=	"Advertising"
category_cartoons	=	"Cartoons"
category_chat	=	"Chat"
category_dangerous	=	"Dangerous materials"
category_dating	=	"Dating"
category_drugs	=	"Drugs"
category_gambling	=	"Gambling"
category_games	=	"Games"
category_hacking	=	"Hacking"
category_malware	=	"Malware"
category_multimedia	=	"Multimedia"
category_phishing	=	"Phishing"
category_redirector	=	"Redirector"
category_remote_control	=	"Remote control"
category_shopping	=	"Shopping"
category_social_networks	=	"Social networks"
category_sports	=	"Sports"
category_title	=	"Category"
category_violence	=	"Violence"
category_warez	=	"Warez"
define_blocked_url	=	"About Web-filters"
desc_allowlist	=	"Allow customized URLs that are considered safe."
desc_allowlist_section	=	"You can customize an allow list to always allow access to websites on the list. The allow list will be given higher priority over the block list, and the Basic, Protected filters."
desc_blacklist_custom	=	"Block customized website categories and URLs."
desc_blacklist_high	=	"Block websites that are not meant for minors, including adult, drug, and gambling websites."
desc_blacklist_low	=	"Block websites that pose potential threats to your security, such as malware and phishing websites."
desc_blocklist_section	=	"You can choose from the following filters (Basic and Protected) or customize a block list to block access to websites that are inappropriate or harmful."
domainname_exist	=	"The domain name already exists."
edit_allowing_list	=	"Edit Allow List"
edit_blocking_list	=	"Edit Block List"
err_otp_not_support	=	"Sorry, this function does not work with 2-factor authentication. Please sign in to _OSNAME_ to add the website directly to your allow list."
msg_oops	=	"Oops! Website blocked!"
msg_page_is_blocked	=	"The requested page is blocked because its content has been filtered by Web-filter. Please contact your Synology Router's administrator if you require access to this website."
profile_basic	=	"Basic"
profile_custom	=	"Custom"
profile_protected	=	"Protected"
schedule	=	"Internet Allowed Time"
schedule_off	=	"Off"
schedule_on	=	"On"
select_all	=	"Select All"
tip_allowinglist	=	"Allow access to custom websites"
tip_blockinglist_custom	=	"Block access to custom websites (Custom)"
tip_blockinglist_high	=	"Block access to known malicious and adult-only websites (Protected)"
tip_blockinglist_low	=	"Block access to known malicious websites (Basic)"
tip_keep_kids_save	=	"Protect your kids from offensive content and potentially harmful websites with Parental Control options. This allows you to limit Internet access for each connected device."
tip_login_admin	=	"Please enter _OSNAME_ administrator's login credentials below."
tip_select_category	=	"Please select the website categories that you want to block."
url_blocking	=	"Web-filter"

[router_pkgmgr]
require_pgsql	=	"To install or enable this package, please attach an external storage device and enable system database at Storage & Printer > Storage > Advanced Settings > System Database first."

[router_port_trigger]
add_pt_rule	=	"Create port triggering rules"
common_applications	=	"Common Applications"
edit_pt_rule	=	"Edit port triggering rules"
err_apply_rule	=	"Failed to apply this rule"
match_port	=	"Trigger port"
port_trigger	=	"Port Triggering"
related_port	=	"Incoming port"
service_name	=	"Name"

[router_spi]
enable_spi	=	"Allow external access to _OSNAME_"
setting_spi_rules	=	"Setting firewall rules"
spi_desc	=	"Your _DISKSTATION_ will allow external access to _OSNAME_ via HTTP/HTTPS ports (e.g., 8000 and 8001). For security reasons, if this option is later disabled, _DISKSTATION_ will block all external access."

[router_tc]
action_active_app	=	"Active applications"
action_built_in_app	=	"Select from a list of built-in applications"
action_custom_app	=	"Customize"
add_app_has_selected	=	"This rule has already been selected."
add_app_qos_title	=	"Add an Application Rule"
add_dev_qos_title	=	"Add a Device Rule"
add_dev_title	=	"Add a Device"
advancedtc	=	"Custom Speed"
application_header	=	"Application"
application_name	=	"Application name"
ban	=	"Banned"
beamforming	=	"Beamforming"
category_communication	=	"Communication"
category_file_transfer	=	"File transfer"
category_games	=	"Games"
category_misc	=	"Miscellaneous"
category_multimedia	=	"Multimedia"
category_network	=	"Network"
category_social_networks	=	"Social networks"
category_web_service	=	"Web services"
chart_dev_others	=	"Others"
chart_time_now	=	"Now"
chart_tip_download	=	"Downloaded"
chart_tip_show_all_applications	=	"Show all application traffic"
chart_tip_show_all_devices	=	"Show all device traffic"
chart_tip_upload	=	"Uploaded"
chart_title_all_applications	=	"All application traffic"
chart_title_all_devices	=	"All device traffic"
chart_title_application	=	"Application"
chart_title_day	=	"Past 24 hours"
chart_title_device	=	"Device"
chart_title_download	=	"Download"
chart_title_live	=	"Live traffic"
chart_title_month	=	"Past 1 month"
chart_title_total_traffic	=	"Total traffic"
chart_title_upload	=	"Upload"
chart_title_week	=	"Past 1 week"
connection_wired	=	"Wired"
create_app_qos	=	"Create App Rule"
current_header	=	"Current (KB/s)"
customize_dev_image	=	"Customize Image"
description_header	=	"Description"
dev_header	=	"Device"
dev_hostname	=	"Device name"
device_name_too_long	=	"The device name is too long."
download_header	=	"Download"
download_speed	=	"Download Speed"
edit_app_qos_title	=	"Edit Application Rule"
edit_dev_qos_title	=	"Edit Device Rule"
edit_dev_title	=	"Edit Device"
enable_history_record	=	"Record traffic statistics"
enable_history_record_layer7	=	"Enable application detection"
enable_history_record_layer7_warning	=	"When application detection is enabled, network speed promotion (also known as CTF, cut-through forwarding) will be turned off. This will stop your current data transmission."
enable_traffic_control	=	"Please {0}enable traffic control{1}."
err_maximum_speed_exceed	=	"The sum of guaranteed download/upload speed cannot exceed {0} KB/s."
guaranteed_header	=	"Guaranteed (KB/s)"
history_record_interval_day	=	"1 day"
history_record_interval_month	=	"1 month"
history_record_interval_week	=	"1 week"
history_record_interval_year	=	"1 year"
history_record_max_interval	=	"Save up to"
mac_addr	=	"MAC address"
maximum_header	=	"Maximum (KB/s)"
no_application_traffic	=	"No active application traffics detected."
num_lan_dev	=	"LAN device"
num_wlan_dev	=	"Wi-Fi device"
op_msg_applying	=	"Applying changes..."
op_msg_ban_self_warning	=	"You are banning the device you're using. Your device can no longer access the Internet and _OSNAME_. Are you sure you want to continue?"
op_msg_beamforming_not_support	=	"Beamforming is not supported by this device."
op_msg_dev_add_success	=	"Successfully added '{0}'."
op_msg_dev_already_has	=	"'{0}' has already been set."
op_msg_dev_apply_success	=	"Successfully operated on '{0}'."
op_msg_dev_refreshed	=	"Refreshed device list."
op_msg_device_exist	=	"This device already exists."
op_msg_failed_apply	=	"Failed to apply changes."
op_msg_num_execeed	=	"Exceeded the maximum number of devices."
op_msg_removing	=	"Removing device..."
op_msg_wireless_only	=	"Only wireless devices are applicable."
parentalcontrol	=	"Parental Control"
port_range_invalid	=	"The range of ports is invalid."
qos_enable	=	"Enable traffic control"
qos_enable_confirm	=	"Traffic control will be enabled and network speed promotion (also known as CTF, cut-through forwarding) will be turned off. This will stop your current data transmission. Are you sure you want to continue?"
qos_msg_customize_new_name	=	"The device name and MAC address cannot be the same. Please enter a new name for the device."
qos_msg_dev_guaranteed_too_small	=	"Device rule's guaranteed speed must be higher than the sum of its application rules' guaranteed speed: {0}."
qos_msg_dev_invalid	=	"The device's guaranteed speed is too low. Please raise the speed limit."
qos_msg_guaranteed_exceed	=	"The guaranteed speed must be lower than or equal to the maximum speed: {0}."
qos_msg_maximum_exceed	=	"The maximum speed must be higher than or equal to the guaranteed speed: {0}."
qos_msg_no_app_select	=	"Please select an application."
qos_msg_rule_num_exceed	=	"You have reached the maximum number of rules: {0}."
qos_switch_confirm	=	"Switching this option may interrupt your connection while the network is restarting. Are you sure you want to continue?"
qos_switch_warning	=	"When traffic control is enabled, network speed promotion (also known as CTF, cut-through forwarding) will be turned off. This will stop your current data transmission."
qoshigh	=	"High Priority"
qoslow	=	"Low Priority"
reload_dev	=	"Reload"
remove_offline_dev	=	"Delete the configuration of this offline device"
select_app	=	"Choose an Application"
speed_header	=	"Speed"
tab_advanced	=	"Advanced"
tab_general	=	"General"
tab_monitor	=	"Monitor"
tc_download_max	=	"Maximum download bandwidth (KB/s)"
tc_download_min	=	"Guaranteed download bandwidth (KB/s)"
tc_upload_max	=	"Maximum upload bandwidth (KB/s)"
tc_upload_min	=	"Guaranteed upload bandwidth (KB/s)"
tip_guaranteed_bw_dl	=	"Must be between {0} and {1}."
tip_guaranteed_bw_ul	=	"Must be between {0} and {1}."
tip_maximum_bw_dl	=	"Must be between {0} and {1} ({2} KB/s means unlimited)."
tip_maximum_bw_ul	=	"Must be between {0} and {1} ({2} KB/s means unlimited)."
upload_header	=	"Upload"
upload_speed	=	"Upload Speed"
waiting_network	=	"Waiting for network to restart"
wifi_strength	=	"Wi-Fi"

[router_terminal]
ssh_service_desc	=	"The password to log in via SSH is the same as the admin account password."
terminal_password_desc	=	"Enable SSH service to log in and manage your _DISKSTATION_."

[router_time]
ntp_service_desc	=	"NTP service allows other network devices to synchronize time with this _DISKSTATION_."

[router_tips]
check_update	=	"Click {0}here{1} to modify your _OSNAME_ update settings."
enews	=	"Get eNews"
keep_update	=	"Keep Your _DISKSTATION_ Updated"
legacy_swap_failed	=	"Failed to allocate swap space for your external storage device."
legacy_swap_finish	=	"Swap space allocation for your external storage device is now complete."
legacy_swap_start	=	"_OSNAME_ is allocating swap space for your external storage device. The access performance of _OSNAME_ might be affected until the allocation is complete."
main_menu	=	"Access all built-in and installed packages from Main Menu."
pkg_center	=	"Install add-on packages to transform your _DISKSTATION_ into a versatile multimedia and file sharing center."
register	=	"{0}Register{1} a Synology Account and get the latest update information {2}here{3}."
router_app	=	"Network Center helps you set up and enjoy various services of _DISKSTATION_ with ease."
update_periodically	=	"Periodically update your _OSNAME_ for new features and total security."
update_setting	=	"Check Update Settings"
welcome_title	=	"Welcome to Synology Router Manager"

[router_topology]
get_topology_fail	=	"Failed to get network topology."
network_topology_ap	=	"Wireless AP"
network_topology_ap_tip	=	"Bridge mode: all interfaces, LAN, WAN, and WLAN are all bridged together, and connect to the Internet via a router."
network_topology_changing	=	"Changing Operation Mode"
network_topology_changing_desc	=	"For both of the above selections, please disable/enable the network interfaces of local connected devices during the changing mode process."
network_topology_client	=	"Wireless Client"
network_topology_client_tip	=	"Client mode: connects to other wirelss router/APs to provide subordinate LAN devices access to Internet."
network_topology_detail	=	"For more information, please see _OSNAME_ help."
network_topology_dn_no	=	"No, the system will try redirecting you to SRM until success.<br>But before clicking OK, please change the current IP address of your SynologyRouter to the static IP address first."
network_topology_dn_yes	=	"Yes, the system will ensure you could login SRM via router.synology.com. "
network_topology_router	=	"Wireless Router"
network_topology_router_tip	=	"Router mode: WAN port connects to Internet via DSL/Cable modem."
set_topology_fail	=	"Failed to set network topology."

[router_tree]
leaf_media_library	=	"Media Indexing"
leaf_winmac	=	"SMB/AFP"

[router_urlblocker]
login_require_admin	=	"Please log in as admin."
whitelist_reading	=	"Fetching allow list..."
whitelist_setting	=	"Setting allow list..."

[router_usbstorage]
help_file_service_desc	=	"Access files on storage devices using Win/Mac file services"
help_file_service_ftp	=	"Access files on storage devices using FTP"
help_file_service_webdav	=	"Access files on storage devices using WebDAV"
help_hibernation	=	"Configure hibernation schedule for USB drives"
help_media_service	=	"Index and organize multimedia files stored on storage devices"
help_printer	=	"Set up and access printers"
help_storage	=	"View storage usage and manage files"
protocol_desc_file_station	=	"Set speed limits for users who transfer files via File Station."
protocol_desc_ftp	=	"Set speed limits for users who transfer files via FTP."
protocol_desc_webdav	=	"Set speed limits for users who transfer files via WebDAV."
storage_printer_desc	=	"Manage various configurations related to the attached storage devices and printers."
usb_hibernation_log_desc	=	"Enable hibernation logs to record when USB drives wake up from hibernation."
usb_storage	=	"Storage & Printer"
usb_storage_desc	=	"Manage Storage & Printer"

[router_wireless]
access_local	=	"Local network access"
access_local_desc	=	"Allow local network access for the guest network"
ap_isolation	=	"AP isolation"
ap_wifi_assoc_list_mac	=	"MAC Address"
ap_wifi_assoc_list_mac_filter	=	"Add to MAC Filter List"
ap_wifi_assoc_list_mac_filter_existed	=	"The Wi-Fi device already exists on MAC filter list."
ap_wifi_assoc_list_mac_filter_hint	=	"MAC address filter will be enabled to deny Wi-Fi devices from connecting."
ap_wifi_mac_filter_err	=	"Failed to enable MAC filter."
ap_wifi_mac_filter_mac	=	"MAC address"
ap_wifi_mac_filter_mac_err	=	"Please input the correct MAC address"
ap_wifi_mac_filter_mac_used	=	"The MAC address already exists."
ap_wifi_mac_filter_setting	=	"MAC Filter"
ap_wifi_mac_filter_siwtch	=	"Enable MAC filter"
ap_wifi_reduce_interference	=	"Interference reduction"
ap_wifi_reduce_interference_field	=	"Reduce interference to Wi-Fi 2.4G by downgrading your USB 3.0 device to USB 2.0."
ap_wifi_reduce_interference_reboot_confirm	=	"A reboot is required for the interference reduction setting to take effect. Would you like to reboot now?"
ap_wifi_reduce_interference_usb3_alarm	=	"To reduce interference to Wi-Fi 2.4G, your USB 3.0 device was downgraded to USB 2.0."
guest_count_down	=	"Valid for"
guest_need_host_enabled_msg	=	"Please enable Wi-Fi first"
guest_network_get_count_down_fail	=	"Failed to get guest network countdown."
guest_network_readjust_msg	=	"Guest network encryption modes are not supported in the current wireless mode. Please readjust guest network settings."
guest_network_set_count_down_fail	=	"Failed to set guest network countdown."
hide_ssid	=	"Hide SSID"
igmp_snooping	=	"IGMP Snooping"
key_rotation	=	"Key rotation"
pmf_mode	=	"PMF support"
pmf_mode_capable	=	"Enabled - Optional"
pmf_mode_required	=	"Enabled - Required"
preamble_type	=	"Preamble type"
preamble_type_auto	=	"Auto"
preamble_type_long	=	"Long"
preamble_type_short	=	"Short"
qos_wmm	=	"Enable WMM QoS"
reg_mode	=	"Regulatory mode"
schedule_24g_title	=	"2.4G Schedule Plan"
schedule_5g_title	=	"5GHz Schedule Plan"
security_high	=	"High"
security_level	=	"Security Level"
security_low	=	"Low"
security_wpa2_eap	=	"WPA2-Enterprise"
security_wpa2_psk	=	"WPA2-Personal"
security_wpa_eap	=	"WPA-Enterprise"
security_wpa_psk	=	"WPA-Personal"
security_wpam_eap	=	"WPA/WPA2-Enterprise"
security_wpam_psk	=	"WPA/WPA2-Personal"
show_ssid	=	"Show SSID"
wifi_2_4g	=	"2.4GHz"
wifi_5g	=	"5GHz"
wifi_daemon_not_ready	=	"WiFi daemon not ready, please wait..."
wifi_on_off_get_fail	=	"Failed to get WiFi on/off status."
wifi_schedule_block_current_access_warning	=	"Enabling the schedule function will result in the Wi-Fi service being turned off according to the current settings. Are you sure you want to continue?"
wifi_setting_get_fail	=	"Failed to get WiFi settings."
wifi_setting_set_fail	=	"Failed to configure WiFi settings."
wifi_switch_off	=	"Please switch on the Wi-Fi button on your _DISKSTATION_"
wps_ap_pin_desc	=	"Enter this PIN code in your wireless device to link. You can enable/disable this PIN code or re-generate a new PIN code by clicking the refresh button."
wps_ap_pin_disable	=	"Disable"
wps_ap_pin_enable	=	"Enable"
wps_ap_pin_label	=	"By AP PIN code"
wps_client_pin_desc	=	"Enter your wireless device's PIN code here and click {0} to link."
wps_client_pin_hint	=	"Enter client PIN code here"
wps_client_pin_label	=	"By client PIN code"
wps_desc	=	"You can use WPS (Wi-Fi Protected Setup) to share the wireless key between your Synology Router and wireless clients, providing an easy and secure way to establish a wireless network with one of the methods below."
wps_desc_step1	=	"Press the WPS button on your _DISKSTATION_."
wps_desc_step2	=	"Press WPS button on your wireless device."
wps_desc_step3	=	"The devices are linked."
wps_info_msg_hide_ssid	=	"Hiding the SSID will disable WPS. Are you sure you want to continue?"
wps_info_msg_security_none	=	"Are you sure you want to configure WPS without security?"
wps_info_msg_security_wep	=	"Setting security mode to WEP will disable WPS. Are you sure you want to continue?"
wps_info_msg_security_wpaeap	=	"Setting security mode to WPA/WPA2-Enterprise will disable WPS. Are you sure you want to continue?"
wps_need_wifi_enabled_msg	=	"Please turn on Wi-Fi to use WPS"
wps_pbc_label	=	"By push button"
wps_pin_invalid	=	"Invalid PIN."
wps_select_type	=	"Please select connection type"
wps_status_connecting	=	"Connecting"
wps_status_failed_query	=	"WPS launch error, please try to restart."
wps_status_msg_err	=	"Failed"
wps_status_ready	=	"Ready"
wps_status_start	=	"Start"
wps_status_success	=	"Successful"
wps_status_timeout	=	"Timeout"
wps_status_unsupported_encryption	=	"Current encryption mode does not support WPS."
wps_status_unsupported_hide_ssid	=	"WPS cannot be used when SSID is hidden."

[routerconf]
apply_rules_desc	=	"Read carefully before proceeding further:"
avahi_is_not_alive	=	"Bonjour service is not enabled. Please go to Control Panel > {0} > {1}  to enable Bonjour service discovery."
cant_get_lan2wan_gateway_hops	=	"If all port forwarding rules failed, please check if there are two or more routers in your network. In that case, please consult your Internet service provider to set the modem/router to Bridge Mode, or try setting your router to Bridge Mode. Click {0}here{1} for more information."
change_router_warn	=	"If you have changed your router, please set up the router again."
check_connect_to_wan	=	"Checking Internet connection"
check_dns_setting	=	"Checking DNS server"
check_gateway_setting	=	"Checking gateway connection"
check_lan2wan_gateway_hops	=	"Checking network environment"
check_network_interface_enabled	=	"Checking network interface"
confirm_enable_upnp_write	=	"Your router must have UPnP enabled to save port forwarding settings."
conflict_desc	=	"The router ports of the newly created rules conflict with the ports used by the following services. The system has randomly assigned ports for the rules. Choose either of the following ways to resolve the conflict."
conflict_force_apply	=	"Override the existing port forwarding rules"
conflict_force_apply_comfirm	=	"Are you sure you want to override the existing port forwarding rules?"
conflict_force_apply_desc	=	"This option will force remove the ports that are still in use by other services."
conflict_force_apply_yes	=	"Override"
conflict_result_preview	=	"Conflicting ports:"
conflict_use_random	=	"Use the ports randomly assigned by the system"
default_gw_changed_portforward_enabled	=	"Port forwarding is enabled because the default gateway was changed."
detect_router	=	"Detect router information"
detect_router_desc	=	"We will help you set up a connection between your _DISKSTATION_ and router. Before the setup, it will take a while to run the checklist below."
detect_router_desc_title	=	"Check network connection"
detect_router_fail_no_resp	=	"No UPnP router was found. Please click Next to proceed to manual installation."
detect_router_fail_not_in_db	=	"Your router is not listed in the Synology UPnP compatibility database. Please click Next to proceed to the compatibility test page."
detect_router_fail_not_support	=	"Your UPnP router did not pass the compatibility test. You can click Next and set up port forwarding rules manually on your router to allow _DISKSTATION_ access from the Internet."
detect_router_not_stop_warn	=	"The connection check cannot be stopped once it gets started."
detect_router_success	=	"Your router has passed the compatibility test."
disable_change_port_rules_confirm	=	"Your router does not allow local ports and router ports to be different. All applicable rules will be disabled."
disable_force_rules_confirm	=	"The following rules conflict with the router port of existing devices connected to this router. Select which rules to apply force port mapping. The remaining rules will be disabled."
dns_setting_cant_resolve_public_FQDN	=	"DNS name resolution is currently abnormal. Please make sure your DNS server is able to resolve public domain names. Click {0}here{1} for more information."
dns_setting_no_response	=	"Your DNS server settings might be incorrect or not working correctly. Please check the settings at Control Panel > Network."
failed_external_ports	=	"Invalid external port(s)"
force_msg_content	=	"Enabling this option will delete the corresponding router ports of affected rules."
force_port_map	=	"Force port mapping"
force_save_rules	=	"Force save port forwarding rules. (This may cause port forwarding rules cannot be synchronized on your router.)"
force_save_rules_warn	=	"Force save rules may cause we cannot synchronize port forwarding rules on you router."
gateway_setting_no_response	=	"Your default gateway settings might be incorrect or not working correctly. Please check the settings at Control Panel > Network."
gateway_setting_not_exist	=	"The default gateway is not responding. Please make sure the IP address set for the default gateway exists. Click {0}here{1} for more information."
header_conflict_router_port	=	"Router Port Conflict"
lan2wan_gateway_hops_over_one	=	"Two or more routers were found in your network. Consult your Internet service provider to set the modem/router to Bridge Mode, or try setting your router to Bridge Mode. Refer to <a class="link-font" href="https://kb.synology.com/DSM/tutorial/two_or_more_routers_were_found" target="_blank">this article</a> for more information."
max_and_used_tip	=	"There are {0} port(s) used by other connected devices/services."
max_port_map_number	=	"Mappable port count"
network_not_connect_to_wan	=	"Unable to connect to the Internet. Please ensure your default gateway settings at Control Panel > Network are correct and your router is connected to the Internet."
no_any_portmap_but_compatiblity_still_fail	=	"Failed to save all port forwarding rules. Please make sure you have enabled all necessary UPnP configurations on the router. If the problem persists, this UPnP router might be incompatible."
port_conflict_on_router	=	"The ports are occupied. The services are now remapped to other available ports on the router. {0}Details{1}"
protocol_on_router_not_enabled	=	"Please enable the UPnP or NAT-PMP protocol on the router first."
protocol_on_router_not_enabled_suggest	=	"You can try to fix this issue with the suggestions below or force save port forwarding rules."
remap_external_port_or_not	=	"Remap external ports"
remap_to	=	"was remapped to"
remapped_external_port	=	"Remapped external ports"
routerconf_add_port_failed	=	"Failed to add the following router port numbers"
routerconf_apply_failed	=	"Failed to apply the port forwarding rules to the router."
routerconf_brand	=	"Brand"
routerconf_contact_synology	=	"Contact Synology Inc."
routerconf_custom_account	=	"Use custom router account"
routerconf_custom_service	=	"Custom service"
routerconf_custom_warning	=	"If you enter a wrong account and password, the router cannot be configured. Are you sure they are correct?"
routerconf_customport_long	=	"Define custom port to be forwarded"
routerconf_customport_short	=	"Custom port"
routerconf_customport_title	=	"Custom port forwarding"
routerconf_disable_test_btn_reason	=	"Apply the settings before testing the connection."
routerconf_exceed_combo_max_port	=	"This router supports up to {0} port forwarding rules. Please remove some rules and try again."
routerconf_exceed_max_port_reduce_ports	=	"Please try enabling fewer ports if your router cannot apply the settings."
routerconf_exceed_max_port_take_time	=	"The ports you requested exceed the mappable port count, and thus it may take a while for the router to apply the settings."
routerconf_exceed_max_port_title	=	"Mappable port count exceeded. Are you sure you want to continue?"
routerconf_exceed_max_rule	=	"The maximum number ({0}) of rules allowed for the router has been exceeded. Please remove some rules and try again."
routerconf_exceed_singel_max_port	=	"This router supports up to {0} ports to be assigned for port forwarding. Please remove some rules and try again."
routerconf_exceed_singel_range_max_port	=	"This router supports up to {0} single ports and {1} port ranges to be assigned for port forwarding. Please remove some rules and try again."
routerconf_external_ip_warning	=	"Failed to retrieve external IP address. Please check your router and DNS settings."
routerconf_goto_module	=	"Do you want to go to "{0}" to change the settings now?"
routerconf_header_ds_port	=	"Local Port"
routerconf_header_enabled	=	"Enabled"
routerconf_header_protocol	=	"Protocol"
routerconf_header_router_port	=	"Router Port"
routerconf_header_service	=	"Name"
routerconf_header_status	=	"Connection Test Result"
routerconf_logout_warning	=	"For the settings to take effect, please make sure you have logged out from the router's management UI."
routerconf_manager_account	=	"Account"
routerconf_manager_password	=	"Password"
routerconf_manager_port	=	"Port"
routerconf_manager_protocol	=	"Protocol"
routerconf_may_not_enable_upnp_write	=	"Failed to save all port forwarding rules. Please make sure the following requirements are met: <br>1. UPnP/NatPmP protocol is enabled. <br>2. Number of port forwarding rules does not exceed the maximum number allowed on the router."
routerconf_model	=	"Model"
routerconf_natpmp_title	=	"We've found a compatible Apple Base Station on which to configure port forwarding."
routerconf_nfound_msg	=	"Can't find your router? "
routerconf_no_enabled_rule_for_test	=	"No enabled rules are available for connection test."
routerconf_no_router_setting	=	"Port forwarding rules allow your _DISKSTATION_ to be accessible over the Internet. Click "Set up Router" to add port forwarding rules to your router."
routerconf_no_router_setting_add	=	"Please set up your router before enabling port forwarding rules."
routerconf_no_rule	=	"Configure port forwarding rules to allow _DISKSTATION_ to be accessible over the Internet."
routerconf_overwrite_warning	=	"This action will overwrite the existing port forwarding rules for the router."
routerconf_port_conflict	=	"The following router port numbers conflict"
routerconf_port_count_invalid	=	"The number of the port is invalid"
routerconf_port_hint	=	"Use “,” to separate ports or “-” for port range, for example: 2727,7272-7300"
routerconf_port_value_invalid	=	"Invalid port value"
routerconf_portforward	=	"Advanced"
routerconf_portforward_long	=	"Enter the administrator password of the router and set up port forwarding."
routerconf_portfwd_opt_desc	=	"Create a port forwarding rule by:"
routerconf_portfwd_opt_title	=	"Create port forwarding rules"
routerconf_portfwd_title	=	"Port Forwarding"
routerconf_portmapping_method	=	"We've found a UPnP router and provide two ways to set up port forwarding."
routerconf_progress_add	=	"Adding the new rules to the router..."
routerconf_progress_delete	=	"Removing the current rules on the router..."
routerconf_protocol_all	=	"TCP/UDP"
routerconf_protocol_tcp	=	"TCP"
routerconf_protocol_udp	=	"UDP"
routerconf_require_gateway	=	"Your gateway setting is invalid."
routerconf_require_iface	=	"Your network settings are not correct."
routerconf_require_not_pppoe	=	"<b>Router Configuration</b> is not available when you connect to the Internet via PPPoE and set it as the default gateway."
routerconf_require_static_ip	=	"Configuring router and port forwarding rules requires static IP. Please change your IP to static IP."
routerconf_router_list_error	=	"Failed to load router list"
routerconf_router_type	=	"Router"
routerconf_router_warning	=	"Please select the exact model and firmware version matching your router. Otherwise, it may cause your router to malfunction."
routerconf_rule_load_error	=	"Failed to load rule data"
routerconf_select_router	=	"Select your router"
routerconf_service_port_conflict	=	"The following service ports conflict with current port forwarding ports"
routerconf_setup_router	=	"Set up router"
routerconf_setup_router_desc	=	"Choose the router you want to set up. Click Update List if your router is not found."
routerconf_status_failed	=	"Failed"
routerconf_status_ntest	=	"Not tested"
routerconf_status_ok	=	"  OK  "
routerconf_status_testing	=	"testing"
routerconf_syntax_version_error	=	"This router is not supported by the current _OSNAME_ on your _DISKSTATION_. Please update the _OSNAME_ and try again."
routerconf_systemport_long	=	"Select built-in application to be forwarded"
routerconf_systemport_short	=	"Built-in application"
routerconf_systemport_title	=	"Built-in applications"
routerconf_test_conn	=	"Test Connection"
routerconf_test_connection	=	"Test port forwarding rules (21, 5000)"
routerconf_test_max_count	=	"Get maximum number of ports: {0}"
routerconf_test_pass	=	"Your UPnP router has passed the compatibility test. Click "Apply" to confirm the settings."
routerconf_test_report	=	"Submit the result to Synology to contribute to the development of Synology products"
routerconf_test_rule_add	=	"Add port forwarding rules"
routerconf_test_rule_del	=	"Remove port forwarding rules"
routerconf_test_rule_edit	=	"Edit port forwarding rules"
routerconf_test_rule_readd	=	"Modify port forwarding rules"
routerconf_test_upnp_desc	=	"Test UPnP router's compatibility"
routerconf_test_upnp_router	=	"Automatically set up port forwarding on the router via UPnP"
routerconf_test_upnp_title	=	"UPnP Router Compatibility Test"
routerconf_tip_cannot_change_router_port	=	"Your router does not allow router ports and local ports to be different."
routerconf_tip_net_cnn_failed	=	"Failed to connect to the Internet"
routerconf_tip_no_service	=	"No Service is Running"
routerconf_tip_port_failed	=	"Port {0} forwarding failed"
routerconf_tip_psuccess	=	"Some ports did not pass the connection test."
routerconf_tip_router_cnn_failed	=	"Failed to connect to the router. Please verify the information."
routerconf_update_db_failed	=	"Failed to update the router database."
routerconf_update_nochange	=	"The router database is already up to date."
routerconf_update_router_list	=	"Update List"
routerconf_update_success	=	"Updated successfully (version {0})."
routerconf_upnp	=	"Quick (Recommended)"
routerconf_upnp_firewall_warning	=	"[UPnp Router] port is required to be opened in firewall settings before setting up a UPnP router. Do you want to set up your firewall now?"
routerconf_upnp_firewall_warning2	=	"You need to open the "UPnP Service" port (at "Firewall") before setting up an UPnP router, or you can only manually set up your router."
routerconf_upnp_fritzbox_warning	=	"Failed to access the router via UPnP. Please sign in to the management UI of the router, modify its UPnP security settings and try again."
routerconf_upnp_long	=	"Search and set up the UPnP router in LAN"
routerconf_upnp_port_conflict	=	"These ports ({0}) are conflicted with the port settings on the router. Please resolve it first."
routerconf_upnp_service_busy	=	"The port forwarding service is busy. Please try again later."
routerconf_upnp_title	=	"We've found a compatible UPnP router on which to configure port forwarding."
routerconf_upnp_warning	=	"Your router is not in our support list, but you may still try to use it."
routerconf_version	=	"Router's firmware version"
routerconf_waiting_apply	=	"Waiting for router to apply rules"
routerconf_wan_warning	=	"If you are connecting to the {0} through a router, your connection may be interrupted while the router settings are being updated."
setup_router_button	=	"Set up Router"
undo_msg_content	=	"If the <b>Router Port</b> of a newly created rule has been used for another device, the system will randomly assign another router port number for such rule.<br>If you do not need to use this rule any more, please disable or delete it."
usb_modem	=	"Mobile broadband"
used_port_map_number	=	"Used port count"
warn_interface_not_enabled	=	"Something went wrong with your network interface. Click {0}here{1} for more information."
warn_setup_router	=	"Set up a router, then enable port forwarding rules for your _DISKSTATION_ to be accessible over the Internet."
warn_usb_modem	=	"Mobile broadband detected, port forwarding cannot be configured."

[rsrcmonitor]
add_disks	=	"Select Disks"
add_performance_event_rule	=	"Add a Rule"
admin_delegate_nfs_mask	=	"The NFS service is not enabled. Please contact your system administrator to enable this service."
chart	=	"Type"
choose_charts	=	"Choose Charts"
cpu	=	"CPU"
cpu_load_avg	=	"CPU load average ({0})"
cpu_others	=	"Others"
cpu_system	=	"System"
cpu_user	=	"User"
data_fields	=	"Data Fields"
depth	=	"Depth"
disk	=	"Disk"
disk_io_usage	=	"Disk I/O utilization"
disk_io_utilization	=	"Disk I/O utilization"
disk_name	=	"Disk Name"
edit_performance_event_rule	=	"Edit a Rule"
enable_event	=	"Enable performance alarm"
enable_history	=	"Enable usage history"
enable_history_document	=	"This function will record the system usage, allowing you to check the system loading afterward. At the upper-right corner of each resource tab on the Performance page, switch the options to see data by different time intervals."
error_db_updating	=	"Updating database. Please wait."
error_no_volume	=	"There is no volume on this Synology NAS. Please create volume first and enable usage history in Resource Monitor > Settings > Settings."
error_not_enable_history	=	"Usage history is not enabled. Please go to Settings to enable it."
error_volume_operating	=	"This volume is busy. Please try again later."
exceeded_max_disk_selection	=	"The maximum number of selection is {0}."
gpu	=	"GPU"
gpu_load	=	"GPU Utilization"
gpu_memory	=	"GPU Memory"
gpu_memory_load	=	"GPU Memory Utilization"
gpu_utilization	=	"GPU Utilization"
input_per_sec	=	"Read (sec)"
io_latency	=	"Disk Latency"
io_size	=	"IO Size"
iops	=	"IOPS"
iowait	=	"I/O Wait"
last_12_months	=	"1 Year"
last_24_hours	=	"1 Day"
last_30_days	=	"1 Month"
last_6_months	=	"6 Months"
last_7_days	=	"1 Week"
latency	=	"Latency"
load_average	=	"Load Average"
localhost	=	"This server"
logs	=	"Logs"
lun_name	=	"LUN"
memory	=	"Memory"
memory_cached	=	"Cached"
memory_composition	=	"Memory Composition"
memory_free	=	"Free"
memory_usage	=	"Memory Usage"
memroy_buff	=	"Buffer"
memroy_used	=	"Used"
minute	=	"min"
minutes	=	"mins"
network	=	"Network"
network_latency	=	"Network Latency"
no_available_gpu	=	"No GPUs installed"
no_history	=	"There is no historical data."
no_running_luns	=	"No Connected LUNs"
output_per_sec	=	"Write (sec)"
overview	=	"Overview"
perf_desc_cpu	=	"System CPU utilization higher than {1}{2}"
perf_desc_gpu	=	"GPU utilization higher than {1}{2}"
perf_desc_iscsi_disk	=	"LUN ({0}) disk latency higher than {1} {2}"
perf_desc_iscsi_network	=	"LUN ({0}) network latency higher than {1} {2}"
perf_desc_load_avg	=	"System CPU load average ({0}) higher than {1}{2}"
perf_desc_memory	=	"System memory utilization higher than {1}{2}"
perf_desc_serv_cpu	=	"Service ({0}) CPU utilization higher than {1}{2}"
perf_desc_serv_disk	=	"Service ({0}) disk I/O utilization higher than {1}{2}"
perf_desc_serv_memory	=	"Service ({0}) memory utilization higher than {1}{2}"
perf_desc_volume	=	"{0} I/O utilization higher than {1}{2}"
performance	=	"Performance"
performance_event	=	"Performance Alarm"
performance_event_detection_service	=	"Performance detection service"
performance_event_enable_warning	=	"To create a performance alarm rule, please enable performance alarm under the Settings tab first."
performance_event_no_event	=	"Please go to the <b>Rules</b> tab to create performance alarm rules first for event monitoring."
performance_event_resource	=	"Type"
performance_event_rule	=	"Rules"
performance_event_rule_exist	=	"The rule already exists."
performance_event_threshold	=	"Greater than"
performance_event_type	=	"Resource"
physical_memory	=	"Physical Memory"
private_memory	=	"Private Memory"
process	=	"Processes"
process_id	=	"Process ID"
process_name	=	"Process Name"
queue_depth	=	"Queue Depth"
read	=	"Read"
read_speed	=	"Read Speed"
realtime	=	"Real Time"
realtime_minutes	=	"Real time duration"
recommend_enable_history_tip	=	"We recommend that you enable usage history to help you check and analyze usage when a performance alarm event occurs."
reserved	=	"Reserved"
rsrcmonitor_cpu_usage	=	"CPU Usage"
rsrcmonitor_mem_tops_desc	=	"Memory usage ranking"
rsrcmonitor_mem_usage	=	"Memory Usage"
rsrcmonitor_net_flow	=	"Network Flow"
rsrcmonitor_netflow_y_unit	=	"(KB/s)"
rsrcmonitor_pppoe	=	"PPPoE"
rsrcmonitor_recv	=	"Received"
rsrcmonitor_show_big_chart	=	"Click to show detail"
rsrcmonitor_tops_desc	=	"CPU usage ranking"
rsrcmonitor_trans	=	"Sent"
rsrcmonitor_usage	=	"Usage"
rsrcmonitor_vol_usage	=	"Volume Usage"
rsrcmonitor_xaxis_unit	=	"(minutes)"
running	=	"Running"
service_name	=	"Service Name"
shared_memory	=	"Shared Memory"
si_descr	=	"Swap in"
sleeping	=	"Sleeping"
so_descr	=	"Swap out"
space	=	"Volume/iSCSI"
speed_limit	=	"Speed Limit"
stopped	=	"Stopped"
swap	=	"Swap"
taskmanager	=	"Task Manager"
throughput	=	"Throughput"
time_range	=	"Time range"
total	=	"Total"
total_latency	=	"Latency"
transfer_rate	=	"Throughput"
utilization	=	"Utilization"
view_all	=	"Custom View"
view_select	=	"Select one or more drives to display their individual data in the charts."
warring_restart	=	"After settings are applied, the window will reopen to load new settings. Are you sure you want to continue?"
write	=	"Write"
write_speed	=	"Write Speed"

[s2s]
col_share_name	=	"Name"
col_summary_blockbkp	=	"Block-level backup"
col_summary_customize_ssh_port	=	"SSH encryption port"
col_summary_share_list	=	"Shared folder"
col_summary_task_name	=	"Task"
col_task_destination	=	"Destination"
col_task_name	=	"Task"
col_task_status	=	"Status"
err_alloc_mem	=	"Failed to allocate memory."
err_already_paired	=	"Requested server has been paired to another client. You have to reset the pair."
err_client_job_del_job	=	"Failed to delete task."
err_client_job_enum_job	=	"Failed to list tasks."
err_client_job_generic	=	"General error in SYNO.Client.Job."
err_client_job_get_job	=	"Failed to retrieve task."
err_client_job_pair	=	"The selected shared folder(s) has/have already been occupied by other sync connections on the destination server. To continue, please unlink these shared folders from the server."
err_client_job_set_job	=	"Failed to set task."
err_client_job_start_job	=	"Failed to start task."
err_client_job_stop_job	=	"Failed to cancel task."
err_client_job_update_fake_file	=	"Failed to update shared folder task list."
err_connection_testing_fail	=	"Testing connection failed. Please check your username and password, make sure 2-factor authentication is disabled, and try again. You can also go to <b>Control Panel</b> > <b>User & Group</b> > <b>User</b> > <b>Edit</b> > <b>Applications</b> on the destination server to check your rsync permissions."
err_exceed_max_client_num	=	"Backup connection on the server side has reached the maximum client number. To continue, please unlink shared folder(s) from the same client on the server."
err_invalid_param_type	=	"Parameter type is invalid."
err_invalid_param_value	=	"Value of parameter is invalid."
err_netbkp_not_enable	=	"Network Backup service is disabled at the destination. To enable it, please sign in to the destination _DISKSTATION_ and go to Control Panel > File Services > rsync."
err_netbkp_not_enable_or_ip_blocked	=	"Please make sure the following services are enabled on the destination:</br>1. rsync: Go to Control Panel > File Services > rsync to enable it.</br>2. IP: Go to Control Panel > Security > Protection, tick Enable Auto Block, and click Allow/Block List to ensure that your IP is not blocked."
err_no_mem	=	"No memory."
err_no_share	=	"This shared folder no longer exists."
err_no_task	=	"The selected task cannot be edited because the shared folders at the source _DISKSTATION_ may have been deleted."
err_not_admgrp	=	"Please perform the operation by an administrator account."
err_pair_add_section	=	"Failed to add connection."
err_pair_config_file	=	"Failed to read connection list."
err_pair_empty_config	=	"Connection list is empty."
err_pair_generic	=	"General error in SYNO.Server.Pair."
err_pair_get_config	=	"Fail to retrieve connection list."
err_pair_get_hash_value	=	"Failed to retrieve connection data."
err_pair_get_open_semaphore	=	"Failed to lock file access."
err_pair_get_section	=	"Failed to retrieve connection."
err_pair_get_status	=	"Failed to retrieve connection status."
err_pair_no_config	=	"Connection list not found."
err_pair_set_config	=	"Fail to set connection list."
err_pair_set_hash_value	=	"Failed to configure connection data."
err_pair_set_section	=	"Failed to set connection."
err_partial_success	=	"Partial success"
err_partial_success_reason	=	"Refer to the {0}file list{1}. The sync result indicates that some of the files no longer exist (e.g., temporary files). Please sync again when your _DISKSTATION_ is not busy. You can go to Log Center and check <a href=&quot https://sy.to/s2serrorcode&quot target=&quot_blank&quot><font class=&quot link-font&quot>this article</font></a> for more information."
err_reset_serviceconf	=	"Test pairing failed. Please sign in to the destination _DISKSTATION_ and go to Control Panel > Shared Folder Sync > Connection List to reset settings."
err_s2s_not_enable	=	"The "Shared Folder Sync" service is not enabled."
err_server_generic	=	"General error in SYNO.Server."
err_server_get_netbkp_setting	=	"Failed to retrieve network backup service settings."
err_server_get_status	=	"Failed to retrieve service status."
err_server_get_volume_path	=	"Failed to retrieve network backup service volume."
err_server_register_service	=	"Failed to register volume for {0} service."
err_server_rsync_not_alive	=	"Rsync is not running."
err_server_unregister_service	=	"Failed to unregister volume for {0} service."
err_share_action	=	"This shared folder is locked by another process. Please try again later."
err_share_already_paired	=	"The selected shared folder(s) has/have already been occupied by other sync connections on the destination server. To continue, please unlink these shared folders from the server."
err_unexpected_error	=	"Unable to perform this operation, possibly because the network connection is unstable or the system is busy. Please try again later."
err_volume_not_found	=	"Volume not found. Please check if the volume status is normal."
msg_no_task	=	"No task"
no_selected_share	=	"No shared folder selected"
s2s_app_desc	=	"Share to Share synchronization"
s2s_app_title	=	"Shared Folder Sync"
s2s_btn_cancel_sharepair	=	"Connection List"
s2s_btn_client_task_list	=	"Task List"
s2s_btn_full_sync	=	"Full Sync"
s2s_btn_sync_imm	=	"Sync Now"
s2s_btn_unlink	=	"Unlink"
s2s_cfm_noshare	=	"There is no shared folder available. If you want to go to the <b>Shared Folder</b> page to create a shared folder, click <b>OK</b>."
s2s_cfm_reset_sharepair	=	"Are you sure you want to unlink?"
s2s_cfm_upgrade_reset	=	"Do you want to reset the previous connection configuration and start using Multiple-Source Shared Folder Sync? <br>(To use this feature, please make sure you have the latest version of _OSNAME_ on the client.)"
s2s_col_pairedclient	=	"Source Server\Shared Folder"
s2s_col_sharename	=	"Local Shared Folder"
s2s_connection_timeout	=	"Connection timeout (seconds)"
s2s_dlg_pairinfo_title	=	"Connection List"
s2s_does_not_support_c2	=	"Shared Folder Sync is currently using this shared folder. To convert the folder, please go to <b>Control Panel</b> > <b>File Services</b> > <b>Advanced</b> > <b>Shared Folder Sync</b>, click on <b>Task List</b> to cancel the ongoing task for the folder and unlink it from the connection list."
s2s_lbl_customize_ssh_port	=	"Customize SSH encryption port for encrypted shared folder sync"
s2s_lbl_every	=	"Every"
s2s_lbl_lastSync_result	=	"Last sync result"
s2s_lbl_sched_every	=	"Every {0}"
s2s_lbl_sched_every_min	=	"Every {0} minutes"
s2s_lbl_sched_mode	=	"Schedule"
s2s_lbl_sched_mode_every	=	"Every {0} hour(s)"
s2s_lbl_sched_mode_man	=	"Manually sync"
s2s_lbl_sched_mode_time	=	"Sync at {0}:{1}"
s2s_lbl_sched_realtime	=	"Sync on modification"
s2s_lbl_src_share	=	"Source"
s2s_lbl_status_idle	=	"Idle"
s2s_lbl_status_sync	=	"Syncing"
s2s_lbl_status_waiting	=	"Waiting"
s2s_lbl_task_name	=	"Task name"
s2s_note_encrypt_share_not_support	=	"Peta Volume does not support encrypted shared folders."
s2s_server_desc	=	"To sync shared folders, please go to File Services > {0} to set up your _DISKSTATION_ as the destination server."
s2s_sync_remote_mount	=	"Sync remote mounted folders"
s2s_warn_accept_share_change	=	"Please confirm that you accept the terms of share changes."
s2s_warn_disable_server_home_service	=	"The user home service on the destination _DISKSTATION_ will be disabled because the "homes" shared folder at the source is to be synced. Are you sure you want to continue?"
s2s_warn_duplicate_taskname	=	"Duplicated task name. Please enter a different name."
s2s_warn_fail_create_remote_share	=	"Warning: Failed to create shared folder on destination side. Please check out the log on destination side for further information."
s2s_warn_homes_enable	=	"The homes share of this server is set as the destination of Shared Folder Sync service. Enabling this service will change its privilege setting and might cause data loss. Are you sure you want to enable this service?"
s2s_warn_incompatible_protocol	=	"Task failed. Please check the following: <br>(1)The Network Backup Service of the destination server is in Synology Backup Mode. <br>(2)The _OSNAME_ version of the source and the destination _DISKSTATION_ devices are the same."
s2s_warn_invalid_taskname	=	"Invalid characters for the task name: ! " # $ % & ' ( ) * + , / : ; < = > ? @ [ ] \ ^ ` { } | ~"
s2s_warn_multisrc_upgrade	=	"The Multiple-Source Shared Folder Sync is supported on this version of _OSNAME_. To enable this feature, please click the Reset button below to clear previous settings and start using this feature. The original tasks need to be re-created."
s2s_warn_no_share	=	"The selected source share folder doesn't exist."
s2s_warn_reach_maxtask	=	"The number of task has reached the system limit."
s2s_warn_share_change	=	"Warning: To remove this shared folder, you will lose its Shared Folder Sync settings."
s2s_warn_share_change_priv	=	"This shared folder is included by Shared Folder Sync service. Changing its privilege setting may cause sync errors. Do you want to change the privilege settings?"
s2s_warn_should_start_bkp_service	=	"Warning: To enable {0} service, you should enable {1} service first. Do you want to enable {2} service now?"
s2s_warn_should_start_synorsync_server	=	"Warning: To enable {0} service, you should switch to Synology Backup Mode. Do you want to switch the mode now?"
s2s_warn_still_run	=	"Since last sync-task {0} is not yet finished, new sync-task will be skipped."
s2s_warn_svr_notsupp_encrypt	=	"The destination server does not support sync tasks that include encrypted shared folders.<br>Update the _OSNAME_ of the destination server to the latest version and try again."
s2s_wiz_desc_customize_ssh_port	=	"This option allows you to specify the transfer encryption port from synced data to remote shared folders and encrypted shared folders."
s2s_wiz_desc_enable_blockLvl	=	"Enable this option to sync only the difference of the share folder.  It saves network bandwidth usage but may require additional time for comparing data."
s2s_wiz_lbl_create_task	=	"Create a sync task"
s2s_wiz_lbl_create_task_name	=	"Name your sync task to distinguish different tasks."
s2s_wiz_lbl_enSvc_title	=	"Allow Shared Folder Sync connection"
s2s_wiz_lbl_enable_blockLvl	=	"Enable block-level synchronization"
s2s_wiz_lbl_enable_desc	=	"Enable this service to make your _DISKSTATION_ a server that allows Shared Folder Sync connection."
s2s_wiz_lbl_reset_desc	=	"Resetting Shared Folder Sync connection allows your _DISKSTATION_ to be paired with another client."
s2s_wiz_lbl_schedule	=	"Schedule"
s2s_wiz_lbl_setSched_man	=	"Run sync manually"
s2s_wiz_lbl_setSched_pd1	=	"Run sync"
s2s_wiz_lbl_setSched_pd2	=	"hour(s)"
s2s_wiz_lbl_setSched_realtime	=	"Run sync on modification"
s2s_wiz_lbl_setSched_time	=	"Run sync automatically everyday at (hh:mm)"
s2s_wiz_lbl_setSched_title	=	"Set up schedule"
s2s_wiz_lbl_set_dest	=	"Set the sync destination"
s2s_wiz_lbl_srcShare_select	=	"Select the source to sync"
s2s_wiz_lbl_summary	=	"Confirm settings"
s2s_wiz_lbl_svcInfo_title	=	"Info"
s2s_wiz_lbl_svc_enable	=	"Enable Shared Folder Sync service"
s2s_wiz_lbl_svr_pair	=	"Server is currently paired with"
s2s_wiz_lbl_svr_status	=	"Server status"
s2s_wiz_sub_setSched	=	"Select a sync schedule. The system will perform sync tasks by the schedule setting."
s2s_wiz_sub_set_dest	=	"Select the destination server from the drop-down list or enter the server IP manually. Then enter the account info."
s2s_wiz_sub_srcShare_select	=	"Select shared folder(s) as the sync source"
s2s_wiz_tab_svc	=	"Shared Folder Sync"
s2s_wiz_title	=	"Shared Folder Sync Wizard"
s2s_wiz_warn_shareData_del	=	"I understand if the selected destination contains folders with identical names as source folders, the folders at destination will be renamed. If they don't exist at the destination, they will be created."
server_status_unknown	=	"Unknown"
tab_client	=	"Client"
tab_destination	=	"Destination"
tab_server	=	"Server"
tab_task_name	=	"Name"
task_status_error	=	"Failed"

[sata]
sata_backingup	=	"The system is backing up to the eSATA disk. Do not remove the eSATA disk until the process is completed."
sata_descr	=	"You can access the automatically created shared folder on the eSATA disk when it's plugged in."
sata_format_err	=	"The system failed to format the eSATA disk. Please make sure the eSATA disk is properly connected to the system, and its write protection is off. Please remove the eSATA disk and then plug in to try again."
sata_format_wizard_fs_type	=	"File system type"
sata_format_wizard_purpose	=	"Select the purpose of the eSATA disk"
sata_formatting	=	"The system is formatting eSATA disk. Do not remove the disk drive until the process is completed."
sata_fsck	=	"The system is checking the eSATA disk. Do not remove the disk drive until the process is completed."
sata_handlefail	=	"The eSATA disk has some problems while accessing it. Please make sure it is well-plugged, or consult the disk manufacturer."
sata_init	=	"The system is performing eSATA disk initialization. Do not remove the disk drive until the process is completed. "
sata_manager_format	=	"eSATA Disk Manager - Format"
sata_needfsck	=	"The system detects inconsistency in your eSATA disk. Please bring the eSATA disk to your nearby PC and perform a file system checking/repairing."
sata_nodisk	=	"No eSATA disk is connected."
sata_satacopying	=	"Copying files form eSATA disk to local disk..."
sata_wcachecrashed_detect	=	"Samsung HD204UI is detected. The write cache is disabled to ensure normal operation."
sata_wcachecrashed_firmware_update	=	"Please update the firmware of this hard disk. And then you may enable the write cache in @."
sata_wcachecrashed_title	=	"Hard Disk Write Cache Disabled"

[schedule]
basic_info	=	"General"
beep_duration	=	"Beep duration (seconds)"
bootup	=	"Boot-up"
by_date	=	"Run on the following date"
by_signal	=	"Interrupted"
cannot_get_history_log	=	"Unable to load the script and its standard output/error or display their contents. Please check the network status or the output settings of Task Scheduler."
clean_recycle_advance_setting_button	=	"Advanced Settings"
clean_recycle_advance_setting_title	=	"Advanced Settings"
clean_recycle_basic_policy_clean_all	=	"Delete all files"
clean_recycle_basic_policy_clean_older	=	"Number of days to retain deleted files"
clean_recycle_basic_policy_clean_size	=	"Limit Recycle Bin size (MB)"
clean_recycle_basic_policy_clean_size_sort_by	=	"Delete files according to"
clean_recycle_basic_policy_clean_size_sort_by_size	=	"Delete large files first"
clean_recycle_basic_policy_clean_size_sort_by_time	=	"Delete old files first"
clean_recycle_basic_policy_title	=	"Retention Policy"
clean_recycle_bin	=	"Empty Recycle Bin"
clean_recycle_bin_select_share_desc	=	"Empty the Recycle Bin of the below shared folder"
clean_recycle_reserve_file_extension	=	"Keep files with the file extensions below"
clean_recycle_reserve_file_extension_example	=	"e.g., 'jpg'"
clean_recycle_reserve_file_policy_desc	=	"Keep certain files from being permanently deleted."
clean_recycle_reserve_file_policy_title	=	"Exceptions"
clean_recycle_reserve_file_size_greater	=	"Keep files larger than or equal to (MB)"
clean_recycle_reserve_file_size_less	=	"Keep files smaller than or equal to (MB)"
cms_gpo_warn	=	"Since your _DISKSTATION_ is managed by CMS, the following types of scheduled tasks may be managed by the CMS group policy: {0}. If you create/modify/delete scheduled tasks of those types, your actions may be overwritten by the CMS group policy."
confirm_delete_task	=	"Are you sure you want to delete the following task(s)?"
confirm_delete_task_count	=	"Are you sure you want to delete the {0} selected tasks?"
confirm_delete_task_pl	=	"Are you sure you want to delete the selected tasks?"
confirm_delete_task_sing	=	"Are you sure you want to delete the selected task?"
confirm_run_task	=	"Are you sure you want to run the following task(s)?"
confirm_run_task_pl	=	"Are you sure you want to run the following tasks?"
confirm_run_task_sing	=	"Are you sure you want to run the following task?"
continue	=	"Resumed"
copy_all	=	"Copy All"
copy_to_clipboard	=	"Copied to clipboard."
coredump	=	"Core dump"
create_task	=	"Create task"
create_task_fail	=	"Failed to create task."
dayabbre_fri	=	"Fri"
dayabbre_mon	=	"Mon"
dayabbre_sat	=	"Sat"
dayabbre_sun	=	"Sun"
dayabbre_thu	=	"Thu"
dayabbre_tue	=	"Tue"
dayabbre_wed	=	"Wed"
days	=	"Days"
dcoutput_off	=	"Output off"
dcoutput_on	=	"Output on"
dcoutput_reset	=	"Suspend for three seconds and restart"
dcoutput_title	=	"DC Output"
delete_task	=	"Delete tasks"
depend_on	=	"Pre-task"
disable_tasks	=	"Disabled tasks"
dsm_autoupdate_all	=	"Install newest _OSNAME_"
dsm_autoupdate_appname	=	"_OSNAME_ Auto Update"
dsm_autoupdate_download	=	"Download _OSNAME_ update"
dsm_autoupdate_hotfix	=	"Install important _OSNAME_ updates"
dsm_autoupdate_notify	=	"Send _OSNAME_ update notification"
edit_task	=	"Edit task"
edit_task_fail	=	"Failed to edit task."
enable_all_dependencies	=	"Enable All"
enable_output_record	=	"Save output results"
enable_tasks	=	"Enabled tasks"
error_delete_failed	=	"Unable to delete task. Please try again later or {0}contact us{1} for technical support if the issue persists."
error_load_failed	=	"Unable to load task. Please try again later or {0}contact us{1} for technical support if the issue persists."
error_run_failed	=	"Unable to run task. Please try again later or {0}contact us{1} for technical support if the issue persists."
error_save_failed	=	"Unable to save task. Please try again later or {0}contact us{1} for technical support if the issue persists."
error_unknown	=	"Unable to perform task. Please try again later or {0}contact us{1} for technical support if the issue persists."
event	=	"Event"
event_all	=	"All"
every_hour	=	"Every hour"
every_minute	=	"Every minute"
every_x_hours	=	"Every {0} hours"
every_x_minutes	=	"Every {0} minutes"
exit_status	=	"Current status"
feasibility_share_delete	=	"Task Scheduler is currently using this shared folder. Please go to Task Scheduler and untick "Save output results" or select another shared folder for saving output results."
feasibility_share_is_using	=	"Task Scheduler is currently using this shared folder. Please go to Task Scheduler and untick "Save output results" or select another shared folder for saving output results."
feasibility_share_offline	=	"Task Scheduler: The volume where this shared folder is located has ongoing tasks. Please go to Task Scheduler and untick "Save output results" or select another shared folder for saving output results."
feasibility_share_umount	=	"Task Scheduler is currently using this shared folder. Please go to Task Scheduler and untick "Save output results" or select another shared folder for saving output results."
last_run_time	=	"Last run time"
load_task_error	=	"Failed to load task. Please try again later."
msg_all_ok	=	"The system can run all the selected tasks."
msg_check_config	=	"To receive the exported report by email, go to Control Panel > Notification > Email to configure sender information."
msg_checking	=	"Checking..."
msg_delete_related_tasks	=	"Delete related tasks"
msg_duplicate_name	=	"This task name is already used."
msg_empty_owner_for_enable	=	"Tasks cannot be enabled if the <b>Owner</b> field is empty."
msg_empty_owner_for_run	=	"Tasks cannot be run if the <b>Owner</b> field is empty."
msg_gpoclient	=	"The CMS Host's Group & Policy will be applied to the Task Scheduler on this Synology NAS. Please set scheduled tasks from the CMS Host."
msg_has_not_run_yet	=	"This task has not started running."
msg_no_data	=	"No data"
msg_no_log_path	=	"The selected destination is not available. Do you want to choose another destination for saving the run details?"
msg_output_existence_reminder	=	"To enable script output, select a folder for your output results in <b>Task Scheduler</b> > <b>Settings</b>. Run the script and then go to <b>Task Scheduler</b> > <b>Actions</b> > <b>View Result</b> to check the results of your script."
msg_output_path_changed	=	"You have changed to another destination for saving run details. Please note the existing run details will remain at the original destination."
msg_output_recording	=	"This function is applicable to user-defined scripts only."
msg_save_changes	=	"Are you sure you want to save the following changes?"
msg_send_message	=	"Send run details by email"
msg_send_when_error	=	"Send run details only when the script terminates abnormally"
msg_warning_before_save_task	=	"Modifying system configurations, running external executable files, or installing unauthorized third-party applications with root permission may result in unexpected system behavior or even data loss. Please make sure you are aware of the consequences before execution."
msg_will_not_run	=	"To run the tasks below, please enable the parenthesized pre-tasks first."
next_trigger_time	=	"Next run time"
next_trigger_time_title	=	"Next Run Time"
no_data	=	"No run details are available."
no_repeat	=	"Do not repeat"
no_schedules	=	"No task schedules"
normal	=	"Normal"
notify_user_share_volume_error	=	"Operation failed. Please check the settings (users, shared folders, and available volume space) related to Task Scheduler."
on_demand	=	"Manual run"
output	=	"Standard output/error"
output_path	=	"Save to"
power_on_off	=	"Power on/off"
related_tasks	=	"Related tasks"
repeat	=	"Repeat"
repeat_bi_monthly	=	"Repeat every two months"
repeat_half_year	=	"Repeat every six months"
repeat_monthly	=	"Repeat monthly"
repeat_qual_monthly	=	"Repeat every four months"
repeat_time_desc	=	"Continue running within the same day"
repeat_tri_monthly	=	"Repeat every three months"
repeat_yearly	=	"Repeat yearly"
run_command	=	"Run command"
run_command_note	=	"For more information about scripts, refer to {0}this article{1}."
run_on_days	=	"Run on the following days"
run_once	=	"Only once"
run_task	=	"Run task"
run_time_first	=	"First run time"
run_time_last	=	"Last run time"
running	=	"Running"
schedule_advance	=	"Advanced schedule"
schedule_already_set	=	"Schedule has been set as follows"
schedule_basic	=	"Basic schedule"
schedule_daily	=	"Daily"
schedule_date	=	"Interval"
schedule_enable	=	"Enable schedule"
schedule_enable_all_recycle_bin	=	"Do you want to enable Recycle Bin for all shared folders?"
schedule_every	=	"Frequency"
schedule_every_each	=	"every"
schedule_every_once	=	"Every day"
schedule_fri	=	"Friday"
schedule_hour	=	"hour(s)"
schedule_iterations	=	"Total number of times each day"
schedule_lasttime	=	"The last working time each day"
schedule_mon	=	"Monday"
schedule_monthly	=	"Monthly"
schedule_onwday	=	"Working days each week"
schedule_sat	=	"Saturday"
schedule_set	=	"Plan schedule"
schedule_starttime	=	"The first working time each day"
schedule_summary	=	"Summary"
schedule_sun	=	"Sunday"
schedule_task	=	"Task Schedule"
schedule_thu	=	"Thursday"
schedule_time	=	"Time"
schedule_title	=	"Schedule Plan"
schedule_tue	=	"Tuesday"
schedule_type	=	"Task Type"
schedule_unknown	=	"unknown schedule"
schedule_warn_nodaysel	=	"Please choose at least one working day"
schedule_wed	=	"Wednesday"
schedule_week_fifth	=	"Fifth"
schedule_week_first	=	"First"
schedule_week_fourth	=	"Fourth"
schedule_week_last	=	"Last"
schedule_week_second	=	"Second"
schedule_week_third	=	"Third"
schedule_weekdays	=	"Weekdays"
schedule_weekend	=	"Weekend"
schedule_weekly	=	"Weekly"
script	=	"Script"
select_folder	=	"Select a folder"
select_result	=	"Select result"
select_share_desc	=	"Please select the share folders whose recycle bin you want to empty."
select_time_desp	=	"Set the first run time for the selected date."
service_action	=	"Service action"
set_script_output_dir	=	"The output log will be displayed here after you have set up a save folder in <b>Task Scheduler <b> > <b>Settings</b>."
set_script_output_dir_if_need	=	"If you wish to save the output logs of user-defined scripts, please go to <b>Task Scheduler</b> > <b>Settings</b> and select a folder."
setting	=	"Settings"
shutdown	=	"Shutdown"
smart_schedule_apply_all	=	"Test all disks"
smart_schedule_apply_sel	=	"Test selected drives"
smart_schedule_desc	=	"S.M.A.R.T. tests can be scheduled to run automatically using {0}."
smart_schedule_range	=	"S.M.A.R.T. Test Range"
smart_schedule_type	=	"S.M.A.R.T. Test Type"
start_date	=	"Start"
start_time	=	"Start time"
status_error	=	"Error"
status_running	=	"Running"
status_stop	=	"Interrupted"
status_unknown	=	"Unknown"
stop_time	=	"Stop time"
task_owner	=	"Owner"
task_scheduler	=	"Task Scheduler"
task_scheduler_desc	=	"Automate specified actions by creating and scheduling customizable tasks."
task_settings	=	"Task Settings"
title_dialog_check	=	"Dependency check"
title_dialog_delete	=	"Delete Tasks"
title_dialog_save	=	"Save Changes"
title_event_based	=	"Triggered Task"
title_package	=	"Packages"
title_run_result	=	"Run Result"
title_service	=	"Service"
title_time_based	=	"Scheduled Task"
title_type	=	"Type"
view	=	"View Result"
view_details	=	"View Details"

[search]
no_search_cache	=	"The search results are temporarily unavailable. Please try again."
no_search_result	=	"No match found."
search_any	=	"Any"
size_greater	=	"is greater than"
size_less	=	"is less than"

[search-box]
application	=	"Application"

[secure_signin]
2fa_rename_warning	=	"Changing the username will disable its current 2-Factor Authentication setting. To re-enable it, go to Options > Personal after signing in. Are you sure you want to continue?"
abnormal_service_admin	=	"The status of Secure SignIn Service is abnormal. Please go to {0}Package Center{1} and make sure Secure SignIn Service has been enabled."
amfa_desc	=	"If the system detects high risk login attempts, Adaptive Multi-Factor Authentication (Adaptive MFA) will ask for a second form of authentication from users who only use passwords to sign in. <a class="link-font" target="_blank" href="https://kb.synology.com/DSM/help/DSM/AdminCenter/connection_security_account">Learn more</a>"
amfa_enable	=	"Enable Adaptive Multi-Factor Authentication for administrator group users"
amfa_title	=	"Adaptive MFA"
are_you_kick_amfa_devices_note	=	"The user will not be able to receive verification requests when they are signed out of all devices. As such, the user will no longer be protected by Adaptive MFA. <a class="link-font" target="_blank" href="https://sy.to/whatisamfa">Learn more</a>"
are_you_kick_devices_desc	=	"This will sign {0} out of _OSNAME_ from all browsers, mobile devices, and apps. Are you sure you want to continue?"
are_you_kick_devices_note	=	"The status on trusted devices will be revoked. You will be required to go through 2-factor authentication at your next sign-in."
are_you_kick_devices_title	=	"Sign out of all devices?"
auth_service_title	=	"Secure SignIn Service"
authentication	=	"Account"
connection_failed	=	"Connection failed. Please make sure you are signed in to {0}Synology Account{1}."
enable_secure_signin_desc	=	"Secure SignIn Service provides flexible sign-in options, including passwordless login and integration with 2-factor authentication."
enable_secure_signin_title	=	"Enable Secure SignIn Service"
enable_secure_signin_with_link_desc	=	"Secure SignIn Service provides flexible sign-in options, including passwordless login and integration with 2-factor authentication. Please go to {0}Security{1} to enable this service."
login_for_secure_signin	=	"To enable Secure SignIn Service, please sign in to your Synology Account or sign up for one."
passwordless_rename_warning	=	"Changing the username will disable its current Passwordless Sign-In setting. To re-enable it, go to Options > Personal after signing in. Are you sure you want to continue?"
service_disabled_note_admin	=	"Unable to load sign-in methods. Please go to {0}Package Center{1} and ensure Secure SignIn Service is enabled."
service_disabled_note_user	=	"Unable to load sign-in methods. Please contact your system administrator to check that Secure SignIn Service is enabled in Package Center."
service_status	=	"Service status"
sign_out_all_devices	=	"Sign Out of All Devices"
sign_out_other_devices	=	"Sign Out of Other Devices"

[securityscan]
brute_force_attack_config	=	"Check on Brute Force Attacks"
button_report_create	=	"Generate Report"
confirm_group_change	=	"Your security baseline will be changed to custom by skipping this rule. Do you want to skip the rule?"
detail	=	"Details"
enable_abnormal_login_notification	=	"Notify me when detecting abnormal login."
event	=	"Event"
feasibilitycheck_login_analyzer_offline	=	"Security Advisor: Login Analysis is using the space in the volume. Login Analysis will be temporarily stopped."
feasibilitycheck_report_storage_location	=	"Security Advisor: The package is using a shared folder on this volume. To continue, go to Security Advisor > Advanced and select a different folder to save the reports."
first_security_level	=	"Security Baseline"
first_title	=	"What are you mainly using your _OSNAME_ for?"
first_title_desc	=	"Choose your main purpose for using _OSNAME_. Security Advisor will scan your system based on the security requirements of your environment. You can change your setting on the Advanced page afterward."
first_view_checklist	=	"View the checklist"
framwork_modified_error	=	"Security Advisor detected configuration inconsistencies. Please check your settings or contact Synology Technical Support for assistance."
gen_report_complete	=	"Report generated successfully. Do you want to open the report now?"
idprotection_label_time	=	"Time"
idprotection_result_daily	=	"Alerts by Hour"
idprotection_result_monthly	=	"Alerts by Day"
idprotection_severity_high	=	"High"
idprotection_severity_medium	=	"Medium"
list_view_desc	=	"{0} View the checklist {1} of security rules to scan."
login_analysis_is_learning	=	"Login Analysis has been enabled. The system is learning your login behaviors..."
login_analysis_is_not_enabled	=	"Login Analysis allows the system administrator to inspect security information of the current system and user accounts. Please go to Advanced > {0}Security Baseline{1} to enable Login Analysis."
login_analysis_learning_info	=	"Security Advisor only analyzes the login information of public IP addresses. Please sign in to _OSNAME_ via a public IP address to enable this function."
login_analysis_learning_remain_time	=	"Time remaining: {0} (Total {1} days)"
login_analysis_no_entry	=	"No abnormal login activities"
multiple_countries	=	"Multiple locations"
multiple_protocols	=	"Multiple protocols"
overview_tooltip_setting_share	=	"Please go to "Advanced" to specify a storage location for reports."
overview_tooltip_share_path_wrong	=	"Storage location for reports does not exist. Please go to the "Advanced" tab to specify a new location."
private_network	=	"Private network"
report_generating	=	"Generating report..."
rule_ldap_server_anonymous_bind_action	=	"In LDAP server connection settings, please enable option of disallow anonymous binds."
rule_ldap_server_anonymous_bind_desc_bad	=	"LDAP server allows anonymous binding."
rule_ldap_server_anonymous_bind_desc_good	=	"LDAP server disallows anonymous binding."
rule_ldap_server_anonymous_bind_purpose	=	"Disallow anonymous binding, if you do not want to allow anonymous users to connect to your LDAP server. Accounts/passwords will be required for all connections."
scan_result	=	"Scanning Results"
securityscan_alert_non_items	=	"Please select at least one item."
securityscan_alert_non_scan_items	=	"Please select at least one Security Scan item."
securityscan_all	=	"All Results"
securityscan_btn_fixme	=	"Fix"
securityscan_category_malware	=	"Malware"
securityscan_category_network	=	"Network"
securityscan_category_securitySetting	=	"Settings"
securityscan_category_systemCheck	=	"System"
securityscan_category_update	=	"Update"
securityscan_category_userInfo	=	"Account"
securityscan_check_danger_malware	=	"{0} threat(s) were detected on your _OSNAME_."
securityscan_check_danger_network	=	"Detected {0} threats on your _OSNAME_."
securityscan_check_danger_systemCheck	=	"Detected {0} threats on your _OSNAME_."
securityscan_check_danger_update	=	"Detected {0} threats on your _OSNAME_."
securityscan_check_danger_userInfo	=	"Detected {0} threats on your _OSNAME_."
securityscan_check_desc_malware	=	"Scanning for malware..."
securityscan_check_desc_network	=	"Checking firewall and network service accessibility..."
securityscan_check_desc_securitySetting	=	"Checking overall system settings..."
securityscan_check_desc_systemCheck	=	"Checking your _OSNAME_..."
securityscan_check_desc_update	=	"Checking software updates and settings..."
securityscan_check_desc_userInfo	=	"Checking the safety of user accounts..."
securityscan_check_empty	=	"No items will be checked in the category."
securityscan_check_outOfDate_updates_dsm	=	"_OSNAME_ version is out-of-date."
securityscan_check_outOfDate_updates_package	=	"{0} package(s) are out-of-date."
securityscan_check_pass_malware	=	"No malware was found on your system."
securityscan_check_pass_network	=	"Network configuration is good."
securityscan_check_pass_securitySetting	=	"System settings are good."
securityscan_check_pass_systemCheck	=	"Your _OSNAME_ is working well."
securityscan_check_pass_update	=	"Update settings are good."
securityscan_check_pass_update_dsm	=	"_OSNAME_ is up-to-date."
securityscan_check_pass_update_dsm_package	=	"_OSNAME_ and all packages are up-to-date."
securityscan_check_pass_update_package	=	"Packages are up-to-date."
securityscan_check_pass_userInfo	=	"All account settings are good."
securityscan_check_pass_userInfo_passwrod	=	"All users have strong passwords."
securityscan_check_risk_network	=	"{0} network setting(s) lead to weak security."
securityscan_check_risk_securitySetting	=	"{0} system security setting(s) lead to weak security."
securityscan_check_risk_systemCheck	=	"{0} system risk(s) found on your _OSNAME_"
securityscan_check_risk_update	=	"{0} update setting(s) lead to weak security."
securityscan_check_risk_userInfo	=	"{0} account setting(s) lead to weak security."
securityscan_check_warning_network	=	"{0} network setting(s) are recommended to be changed."
securityscan_check_warning_securitySetting	=	"{0} system security setting(s) are not enabled."
securityscan_check_warning_systemCheck	=	"{0} system warning(s) need to be checked."
securityscan_check_warning_update	=	"{0} update setting(s) are not enabled."
securityscan_check_warning_userInfo	=	"{0} account security setting(s) are not enabled."
securityscan_check_week_password	=	"{0} user(s) have weak passwords."
securityscan_config_custom_group	=	"Customize checklist"
securityscan_config_default_group	=	"Security Baseline"
securityscan_config_default_group_company	=	"For work and business"
securityscan_config_default_group_company_desc	=	"Perform comprehensive checks to meet security compliance requirements for organizations."
securityscan_config_default_group_custom	=	"Custom"
securityscan_config_default_group_custom_desc	=	"Define which checks you would like to perform."
securityscan_config_default_group_home	=	"For home and personal use"
securityscan_config_default_group_home_desc	=	"Perform essential checks to protect your _OSNAME_ against common cyber threats."
securityscan_config_schedule_desc	=	"Enable regular scan schedule"
securityscan_config_storage_location_non_exist	=	"This location no longer exists. Specify a new one."
securityscan_customlist_name	=	"Custom List"
securityscan_daily_report_label	=	"Enable daily report"
securityscan_day	=	"day(s) "
securityscan_detail_purpose	=	"Details"
securityscan_elapsed_time	=	"Elapsed time: "
securityscan_error_is_scanning	=	"Setting changes cannot be saved while a scan in in progress. Please wait until scanning is complete."
securityscan_error_update	=	"An error occurred while updating the security database. Scans will be performed according to the old database."
securityscan_filter_category	=	"By Category"
securityscan_filter_status	=	"By Status"
securityscan_group_choose_desc	=	"Please select the security baseline that meets your needs to perform scanning."
securityscan_group_choose_title	=	"Choose Security Baseline"
securityscan_hour	=	"hour(s) "
securityscan_info_fail_desc	=	"There are still settings we recommend changing."
securityscan_label_category	=	"Category"
securityscan_label_desc	=	"Event"
securityscan_label_level	=	"Severity"
securityscan_label_status	=	"Status"
securityscan_label_update	=	"Last update"
securityscan_last_scan_time	=	"Last scanned {0} ago."
securityscan_minute	=	"minute(s) "
securityscan_monthly_report_desc	=	"To receive reports via email, please go to {0}Control Panel{1} to enable email notifications first."
securityscan_monthly_report_label	=	"Enable monthly report"
securityscan_restore_desc	=	"Are you sure you want to reset all settings?"
securityscan_result_alarm	=	"Critical"
securityscan_result_error	=	"Error"
securityscan_result_fail	=	"Failed"
securityscan_result_nonChecked	=	"Unchecked"
securityscan_result_pass	=	"Passed"
securityscan_result_running	=	"Running"
securityscan_result_skip	=	"Skipped"
securityscan_scan	=	"Scan"
securityscan_schedule_name	=	"Scan Schedule"
securityscan_second	=	"second(s) "
securityscan_setting_action_title	=	"Recommended Action"
securityscan_setting_link	=	"Open {0} to take recommended actions."
securityscan_severity_danger	=	"Critical"
securityscan_severity_info	=	"Info"
securityscan_severity_outOfDate	=	"Medium"
securityscan_severity_risk	=	"High"
securityscan_severity_warning	=	"Medium"
securityscan_stop	=	"Stop"
securityscan_storage_location	=	"Storage location"
securityscan_storage_name	=	"Report Settings"
securityscan_system_danger	=	"Caution"
securityscan_system_danger_desc	=	"Security threats were found that need your attention."
securityscan_system_firstScan	=	"Ready to scan"
securityscan_system_firstScan_desc	=	"You have not scanned your _OSNAME_ yet."
securityscan_system_outOfDate	=	"Out-of-date"
securityscan_system_outOfDate_desc	=	"Your _OSNAME_ or package version is out-of-date."
securityscan_system_risk	=	"At Risk"
securityscan_system_risk_desc	=	"Security risks were found that need your attention."
securityscan_system_safe	=	"Good"
securityscan_system_safe_desc	=	"The security of your _OSNAME_ is good."
securityscan_system_scan	=	"Scanning"
securityscan_system_scan_desc	=	"Scanning in progress..."
securityscan_system_stop	=	"Stopping"
securityscan_system_stop_desc	=	"Stopping scan..."
securityscan_system_update	=	"Updating"
securityscan_system_update_desc	=	"Updating security database..."
securityscan_system_warning	=	"Warning"
securityscan_system_warning_desc	=	"Some security protection settings are not enabled."
securityscan_view_results	=	"View Results"
thresh_fails	=	"Number of failed logins"
thresh_minutes	=	"Time (minutes)"
unknown_geoip_location	=	"Unknown location"
view	=	"View"
welcome_page_abnormal_login_rule	=	"Detect abnormal login activities and send email notification to users"
welcome_page_help_desc	=	"To let non-admin users to receive email notifications, do either of the following:"
welcome_page_help_desc_first_point	=	"Ask each user to set their email address in personal account settings."
welcome_page_help_desc_second_point	=	"Fill in each user's email address in {0} directly."
welcome_page_notification_setting	=	"To set up email notifications, go to {0}."
welcome_page_title	=	"More protection, more secure"

[service]
Apply	=	"Maximum HTTP concurrent connections"
acl_bypass_traverse_checking	=	"Bypass Traverse Checking"
additional_web_port	=	"Photo Station/Web Station ports"
afp_time_machine_enable	=	"Enable Bonjour Time Machine broadcast via AFP"
afp_time_machine_note_desc	=	"Enable the Bonjour service discovery at {0} to help Time Machine find your shared folders."
backup_task	=	"Backup Task"
btrfs_scrubbing_service	=	"Btrfs Scrubbing"
bypass_traverse_soft_check_fail	=	"Modifying the bypass traverse checking setting will affect the ongoing tasks below. Click "Yes" to continue."
caldav_enable_desc	=	"Enable CalDAV to manage calendars stored on your _DISKSTATION_ with a CalDAV client, such as Apple iCal or Mozilla Sunbird."
caldav_select_conflict	=	"Calendar source and destination cannot be the same."
calendar_broken	=	"Missing"
calendar_crashed	=	"Crashed"
calendar_list	=	"Calendar List"
calendar_location	=	"Location"
calendar_name	=	"Calendar Name"
calendar_name_illegal	=	"Calendar name contains invalid characters."
calender_destination_illegal	=	"The destination name contains invalid characters."
cannot_create_calender_inhomes	=	"You are not allowed to create a calendar in the "homes" folder."
configured_router_port	=	"Configured Router Port"
confirm_disable_smb_afp_tm_mdns	=	"If you disable the {0} service, the system will disable the Bonjour Time Machine broadcast via {0}."
confirm_disable_smb_wstransfer	=	"If you disable SMB service, Windows network discovery will be automatically disabled."
cups_printer_daemon	=	"CUPS Printer Daemon"
ddns_available_macros	=	"Naming Rules for Variables"
ddns_privacy_note	=	"Note: To provide Synology DDNS service, Synology will collect <a class="link-font" target="_blank" href="http://www.synology.com/zh-tw/company/legal/Services_Data_Collection_Disclosure#quickconnect-ddns">connection information</a> of your Synology device. Please refer to our <a class="link-font" target="_blank" href="http://www.synology.com/company/privacy">Privacy Statement</a> to learn more about it."
delete_check_calendar	=	"Are you sure you want to delete the selected calendar(s)?"
delete_check_calendar_note	=	"All data in the calendar will be deleted."
delete_check_rsync_account	=	"Are you sure you want to delete the selected account(s)?"
desc_rsync_config	=	"Using customized rsync configuration will set your _DISKSTATION_ as the destination server for rsync backup only. Refer to Help for more information about customizing your rsync configuration."
desktop_service	=	"_OSNAME_ Desktop"
disable_avahi_warning	=	"Disabling Bonjour service discovery will cause local devices to be unable to find services (including: SMB/AFP, FTP, and some package services, etc.) provided by the _DISKSTATION_. Do you want to disable it now?"
disable_bypass_traverse_hard_check_fail	=	"Unable to disable bypass traverse checking due to the following reasons:"
domain_user_disallow	=	"This function is not available for domain users."
dsm_port	=	"_OSNAME_ ports"
edit_rsync_account	=	"Edit rsync Account"
enable_acl_bypass_traverse_checking	=	"Enable bypass traverse checking"
enable_acl_bypass_traverse_checking_desc	=	"Enabling bypass traverse checking allows users to traverse folders and access permitted files or subfolders."
enable_afp_warning	=	"macOS 11 Big Sur and above versions may have compatibility issues with AFP. We recommend using SMB to access files instead. Do you still want to enable AFP?"
enable_avahi	=	"Enable Bonjour service discovery to locate _DISKSTATION_"
enable_avahi_desc	=	"Enabling this option allows Bonjour service discovery to find the _DISKSTATION_."
enable_bypass_traverse_hard_check_fail	=	"Unable to enable bypass traverse checking due to the following reasons:"
enable_customized_max_http_connections	=	"Customize maximum concurrent HTTP connections"
enable_directly_access	=	"Enable direct access to _OSNAME_ without port numbers"
enable_directly_access_desc	=	"You can directly access _OSNAME_ via HTTP(S) connection, without adding any port number after the IP/DDNS address of your _DISKSTATION_. Note: This function will be disabled once Web Station is installed."
enable_hsts	=	"Enable HSTS"
enable_hsts_desc	=	"Enabling HSTS forces browsers to use secured connections."
enable_http2	=	"Enable HTTP/2"
enable_http2_desc	=	"HTTP/2 speeds up web page loading when using encrypted connections."
enable_reuseport	=	"Enable reuseport to enhance high concurrent connection capability for web service"
enable_rsync_account	=	"Enable rsync account"
enable_rsync_config	=	"Use customized rsync configuration"
enable_rsync_service	=	"Enable rsync service"
enable_server_header	=	"Enable the "Server" header in HTTP responses"
enable_smb_tm_mdns_warning	=	"If you enable the Bonjour Time Machine broadcast via SMB, the system will enable SMB3 Windows file service, Opportunistic Locking, SMB durable handles, and SMB2 lease. Are you sure you want to continue?"
enable_spdy	=	"Enable SPDY"
enable_spdy_desc	=	"SPDY speeds up web page loading when using encrypted connections."
enable_ssdp	=	"Enable Windows network discovery to allow access via web browsers"
enable_ssdp_desc	=	"Local network devices can use Windows network discovery to access the web interface of _OSNAME_."
enable_wstransfer	=	"Enable Windows network discovery to allow file access via SMB"
enable_wstransfer_desc	=	"Local network devices can use Windows network discovery to access files on your _DISKSTATION_."
enabled_service	=	"Enabled Service"
enter_calendar_name	=	"You must enter a calendar name."
error_dl_port_in_used	=	"This port number is reserved for system use only. Please use other numbers."
error_dl_same_time	=	"Start time and stop time should be different."
error_invalid_user	=	"Please specify a valid user."
example	=	"Example"
file_transfer_log	=	"File transfer log"
gcp_service	=	"Google Cloud Print"
hotplugd_service	=	"Hotplug Service"
http_connections	=	"Max connections"
http_connections_hint	=	"Higher maximum HTTP concurrent connections demand more system memory."
httpport_and_httpsport_same	=	"The ports for HTTP and HTTPS cannot be the same. Please try another port."
important	=	"Important"
internal_service	=	"_OSNAME_ Internal Service"
ldap_server	=	"LDAP server"
move_share_to_ext4_device	=	"{0} requires an external device with EXT4 file system. Please move {1} to an EXT4 device first."
no_ext4_external_devices	=	"{0} requires an external device with EXT4 file system. Please attach one and format it as EXT4 first."
pgsql_upgrade	=	"Database Upgrade Task"
photo_enable_warning	=	"Now you can upload photos and videos to your "photo" shared folder. Using Photo Station Uploader to upload files is faster and recommended."
photo_enable_with_disabled_admin	=	"It is recommended to enable admin on _OSNAME_ to create administrative accounts on Photo Station if there is none. Do you want to enable admin now?"
please_apply_setting_first	=	"Please save the {0} settings first."
pps_download_now	=	"Download now"
pps_enable_warning	=	"You can now upload photos to the "photo" folder under the root directory "home". For faster speed, we recommend uploading photos and videos with the desktop tool Photo Station Uploader."
printing_service	=	"Printing service"
redirect_secureui	=	"Automatically redirect HTTP connection to HTTPS for _OSNAME_ desktop"
restart_apache	=	"Restarting Web Server..."
restart_warning	=	"Warning! Network services will be restarted. Are you sure you want to continue?"
router_port_conflict_remap_alert	=	"Port conflicts with the router port of an existing device connected to this router have been detected. The port used by the following services has been remapped. Please go to Router Configuration for more details."
router_redirect_secureui	=	"Automatically redirect HTTP connections to HTTPS"
rsync_account	=	"rsync Account"
rsync_account_desc	=	"You can create/edit rsync accounts for external users. This allows external users to back up data to shared folders on your _DISKSTATION_ via unencrypted rsync. Please note that this may lower the security level of your _DISKSTATION_."
rsync_sshd_port	=	"SSH encryption port"
scemd_service	=	"System Monitor Daemon"
server_header	=	"Custom "Server" header"
service_additional_port	=	"Add additional port"
service_admin	=	"System Management"
service_afp_transfer_log	=	"Enable transfer log"
service_all_interface	=	"All"
service_allow_on_firewall	=	"Allow through firewall"
service_app_uhconflict	=	"This action will disable "{0}". Are you sure you want to continue?"
service_audio	=	"Enable Audio Station 3"
service_block_by_firewall	=	"Blocked by firewall"
service_ca_copy_failed	=	"Please import your certificate issued by a trusted authority and try again."
service_ca_not_utf8	=	"File encoding must be saved as UTF-8."
service_caldav	=	"Enable CalDAV"
service_codepage_str2	=	"here"
service_configure_https	=	"Configure HTTPS"
service_ddns_account_login	=	"Register a new hostname with an existing {0} account"
service_ddns_account_mode	=	"Choose an existing No-IP.com account or register a new one:"
service_ddns_add_record	=	"Add DDNS"
service_ddns_auth_key	=	"Key"
service_ddns_auto_setup_ip	=	"Automatic Setup"
service_ddns_check_ip_empty	=	"The IPv4 and IPv6 addresses cannot be empty at the same time."
service_ddns_could_not_login	=	"Could not log in?"
service_ddns_create_cert_fail	=	"Unable to create certificate. Please create certificate manually in Control Panel > Security > Certificate."
service_ddns_customize	=	"Customize Provider"
service_ddns_customize_ip	=	"Set External IP"
service_ddns_customize_provider	=	"Customize a DDNS service provider"
service_ddns_delete_warning	=	"Are you sure you want to remove the following hostname(s)?"
service_ddns_desc_enter_account	=	"Enter your {0} account credentials."
service_ddns_desc_login_failed	=	"Invalid credentials. Please try again."
service_ddns_desc_other_support	=	"To change your {0} account information, please contact {1} for help. "
service_ddns_desc_register_account	=	"Enter your account credentials or register an account from {0} to use the DDNS hostname."
service_ddns_domain_load_error	=	"Failed to load domain"
service_ddns_domain_select	=	"Select a domain name"
service_ddns_domain_tw	=	"台灣"
service_ddns_dup_customized_provider	=	"This provider already exists"
service_ddns_dup_email	=	"This email is already used."
service_ddns_dup_hostname	=	"This hostname is already used."
service_ddns_dup_username	=	"This username is already used."
service_ddns_edit_record	=	"Edit DDNS"
service_ddns_email	=	"Email"
service_ddns_email_not_registedd	=	"This email or password is invalid."
service_ddns_empty_service	=	"DDNS simplifies connection to your Synology NAS over the Internet by mapping a hostname to its IP address. Click "Add" to create a DDNS for your Synology NAS."
service_ddns_error_noip_alphanumspace	=	"alphanumeric and space only"
service_ddns_error_noip_password	=	"Character +,?,%,& are not allowed."
service_ddns_error_unknown	=	"Unable to perform this operation. Please contact <a class="link-font" target="_blank" href="https://www.synology.com/company/contact_us">Synology Technical Support</a>."
service_ddns_exceed_max_account	=	"You are not allowed to create more than {0} accounts in one day."
service_ddns_failed	=	"Failed"
service_ddns_firstname	=	"First name"
service_ddns_forget_password	=	"Forgot your password?"
service_ddns_fullname	=	"Full name"
service_ddns_had_account	=	"I already have a {0} account"
service_ddns_heartbeat	=	"Heartbeat"
service_ddns_heartbeat_help	=	"By enabling Heartbeat, Synology Account will send notifications to you when the connection is down."
service_ddns_host_expired	=	"Hostname has expired."
service_ddns_hostname	=	"Hostname"
service_ddns_input_warning_hostname	=	"Hostname contains invalid characters."
service_ddns_input_warning_no_hostname	=	"You have not entered the hostname."
service_ddns_input_warning_no_passwd	=	"You have not entered the password"
service_ddns_input_warning_no_username	=	"You have not entered the username."
service_ddns_input_warning_passwd	=	"Password contains invalid characters."
service_ddns_input_warning_username	=	"Username contains invalid characters."
service_ddns_last_updated	=	"Last update time"
service_ddns_lastname	=	"Last name"
service_ddns_legend	=	"DDNS"
service_ddns_login_account_failed	=	"Login failed."
service_ddns_login_or_register_account	=	"Log in or register a {0} account"
service_ddns_max_info_num	=	"You have already reached your hostname limit."
service_ddns_msg_host_in_used_by_yourhost	=	"Do you want to transfer "{0}" to this _DISKSTATION_?"
service_ddns_msg_verification_mail_alert	=	"A verification mail has been sent to {0}. Follow the mail's instructions to activate your email account and DDNS service."
service_ddns_next_refresh	=	"Next Refresh Time"
service_ddns_noip_tos	=	"By checking here you are agreeing to the <a class="link-font" target="_blank" href="http://www.no-ip.com/legal/tos.php">Terms of Service</a> and the <a class="link-font" target="_blank" href="http://www.no-ip.com/legal/privacy.php">Privacy Policy</a>."
service_ddns_normal	=	"Normal"
service_ddns_not_ready	=	"Getting ready"
service_ddns_note	=	"Note"
service_ddns_one_hostname_for_a_provider	=	"You can only set one hostname for each DDNS provider"
service_ddns_operation_fail	=	"Unable to perform this operation. Please contact <a class="link-font" target="_blank" href="https://www.synology.com/company/contact_us">Synology Technical Support</a>."
service_ddns_passwd	=	"Password"
service_ddns_passwd_confirm	=	"Confirm password"
service_ddns_provider_customized_description	=	"You can add a new DDNS provider below."
service_ddns_provider_oray	=	"Oray.com PeanutHull DDNS"
service_ddns_provider_tencent_cloud	=	"Tencent Cloud"
service_ddns_provider_website	=	"Visit DDNS provider's website"
service_ddns_reg_field_info	=	"Information"
service_ddns_reg_field_opt	=	"Registration"
service_ddns_register_btn	=	"Register now"
service_ddns_register_desc	=	"Register a new hostname from your No-IP account"
service_ddns_resend_verify_mail_ok	=	"An activation mail has been sent. Please activate your MyDS Center account soon."
service_ddns_select_provider	=	"Select a service provider..."
service_ddns_status_911	=	"The DDNS server is currently undergoing maintenance. Please try again later."
service_ddns_status_abuse_failed	=	"Too many update requests. Please try again later."
service_ddns_status_auth_failed	=	"Authentication failed."
service_ddns_status_auth_hostname_failed	=	"Incorrect password or hostname."
service_ddns_status_bad_hostname	=	"Invalid domain name"
service_ddns_status_cant_reg_hostname	=	"Hostname already registered"
service_ddns_status_check_with_twnic	=	"Contact TWNIC for support"
service_ddns_status_client_failed	=	"Unable to perform this operation. Please contact <a class="link-font" target="_blank" href="https://www.synology.com/company/contact_us">Synology Technical Support</a>."
service_ddns_status_connect_host	=	"Failed to connect to the server. Please check the network connection of the server."
service_ddns_status_email_not_verified	=	"Your email address has not been verified. The DDNS service is currently unavailable."
service_ddns_status_host_in_used	=	"The hostname is already used. Please specify another one."
service_ddns_status_ip_not_ready	=	"IP addresses of network interfaces are not ready."
service_ddns_status_myds_not_logged_in	=	"Synology Account is not signed in."
service_ddns_status_need_verified	=	"Account not activated"
service_ddns_status_no_host	=	"Hostname does not exist. Please check if you have created the hostname on the website of the service provider."
service_ddns_status_not_fqdn	=	"Incorrect hostname format."
service_ddns_status_param_error	=	"Connection error. Please try again later."
service_ddns_status_resolve_failed	=	"Connection failed. Cannot resolve the IP address of the server."
service_ddns_status_server_broken	=	"The DDNS server is temporarily out of service. Please contact the service provider."
service_ddns_status_synology_auth_failed	=	"Authentication failed. If you forgot the password, please go to <a class="link-font" target="_blank" href="https://account.synology.com/support/register_password_remind.php">Synology Account</a> to reset your password."
service_ddns_status_synology_email_not_verified	=	"Please check your inbox and activate your Synology Account so that the associated services from Synology will not be suspended."
service_ddns_syno_cert_issued	=	"The certificate for {0} from {1} has been issued."
service_ddns_syno_create_cert	=	"Get a certificate from {0} and set it as default"
service_ddns_syno_create_cert_note	=	"<b>Note:</b> We will pass your domain to {0} for domain registration. Please see our <a class="link-font" target="_blank" href="https://www.synology.com/company/legal/privacy">Privacy Statement</a> for details."
service_ddns_syno_create_cert_reboot	=	"If necessary, we may restart your _DISKSTATION_ after the certificate is created."
service_ddns_syno_create_cert_waiting	=	"It will take a while to set up the DDNS. Please wait a moment. We will restart the web server."
service_ddns_syno_set_default_cert	=	"Set as the default certificate (recommended)"
service_ddns_syno_set_default_cert_notification	=	"{0} will be set as the default certificate"
service_ddns_syno_set_default_cert_service_invalid	=	"This setting may affect services that used other certificates before, e.g., FTPS. To customize certificates for these services, please go to Control Panel > Security > Certificate > Settings."
service_ddns_syno_tos	=	"By checking here you are agreeing to the <a class="link-font" target="_blank" href="http://www.synology.com/company/terms_of_services">Terms of Service</a> and the <a class="link-font" target="_blank" href="http://www.synology.com/company/privacy">Privacy Policy</a>"
service_ddns_synology_member_zone	=	"Check the DDNS status of your _DISKSTATION_ online at <a class="link-font" target="_blank" href="http://account.synology.com/support/register_ddns.php">_MEMBERZONE_</a>."
service_ddns_synology_membership	=	"Synology Account"
service_ddns_test_connection_fail	=	"Unable to perform this operation. Please contact <a class="link-font" target="_blank" href="https://www.synology.com/company/contact_us">Synology Technical Support</a>."
service_ddns_tip	=	"Enable DDNS support to allow users to access the server through a registered hostname."
service_ddns_title	=	"Enable DDNS support"
service_ddns_title_register_account	=	"Register a {0} Account"
service_ddns_twnic_note	=	"TWNIC will stop accepting registrations for _OSNAME_ as of Jul. 1, 2020. Your current TWNIC DDNS service can still be used within the period of your valid subscription. However, it will not be available anymore once deleted from _OSNAME_."
service_ddns_type	=	"Service Provider"
service_ddns_update_fail	=	"Failed to register IP address {1} to hostname {0} [{2}]"
service_ddns_username	=	"Username"
service_decs_web_localuser	=	"Enable this option to allow local users to create a personal website by uploading web pages to the self-created "www" folder in the user home directory."
service_desc	=	"Users can access data on the system through FTP (file transfer protocol) after enabling service."
service_desc_audio	=	"Enable Audio Station to play music through computers, USB/UPnP devices, iOS/Android mobile devices, or AirPlay compatible devices."
service_desc_file	=	"Enable File Station to access and manage files through a customized port. You can also use File Station through mobile devices."
service_desc_httpport	=	"In addition to the default port number 80, you can add another port for Photo Station and Web Station."
service_desc_https_port	=	"In addition to the default encrypted port number 443, you can add another port for Photo Station and Web Station to use."
service_desc_httpsport	=	"In addition to the default port number 443, you can add another port for Photo Station and Web Station."
service_desc_mysql	=	"Enable MySQL to use database functions."
service_desc_photo	=	"Enable Photo Station to share photos and videos in the "photo" shared folder, and publish your blog. You can browse Photo Station with DS photo+ using mobile devices.<br><br>To manage separate user accounts for Photo Station, go to the settings of Photo Station."
service_desc_photo_personal_service	=	"Enable Personal Photo Station service to allow _DISKSTATION_ users to have their own Photo Station. When it is enabled, users can enable or disable their Personal Photo Station on the "{0}" page."
service_desc_photo_personal_setting	=	"Enable Photo Station - {0} to share photos and videos in the "home/photo" folder, and to publish your blog. You can also use Photo Station - {1} through mobile devices.<br><br>To manage user accounts for Photo Station - {2}, go to the administrator area of Photo Station - {3}."
service_desc_secureui	=	"By enabling this function, HTTP connections will be protected with SSL/TLS connections."
service_desc_web	=	"Enable Web Station to create a website."
service_desc_web_secureui	=	"By enabling this function, HTTP connections for web services will be protected via SSL/TLS connections."
service_device_discovery	=	"Device Discovery Service "
service_disable	=	"Disable"
service_discovery	=	"Service Discovery"
service_dl_bt_dht_desc	=	"Enable DHT network to activate trackerless torrent files."
service_dl_bt_dht_enable	=	"Enable DHT network"
service_dl_bt_dht_port	=	"DHT UDP port"
service_dl_bt_encrypt	=	"BT protocol encryption"
service_dl_bt_encrypt_always	=	"Always"
service_dl_bt_encrypt_auto	=	"Auto"
service_dl_bt_encrypt_disable	=	"Disable"
service_dl_bt_max_download	=	"Max. download rate"
service_dl_bt_max_upload	=	"Max. upload rate"
service_dl_bt_maxpeers	=	"Max. peers allowed per torrent files"
service_dl_bt_network_setting	=	"BT Network Setting"
service_dl_bt_port_range	=	"BT Port Range"
service_dl_bt_rate_desc	=	"(0 KB/s means unlimited.)"
service_dl_bt_rate_setting	=	"BT upload and download rates"
service_dl_bt_seeding_hint	=	"Hint: Setting share ratio to zero and seeding interval as "Ignore" will stop seeding immediately when download is finished."
service_dl_bt_seeding_interval	=	"Time of seeding equal to or more than"
service_dl_bt_seeding_ratio	=	"Share ratio equal to or more than (%)"
service_dl_bt_seedopt_forever	=	"Forever"
service_dl_bt_seedopt_ignore	=	"Ignore"
service_dl_bt_seedopt_unit_hours	=	"hour(s)"
service_dl_bt_seedopt_unit_mins	=	"mins"
service_dl_bt_setting	=	"BT Download Setting"
service_dl_bt_stoptask_desc	=	"Auto stop task when satisfying all the following conditions:"
service_dl_bt_stoptask_opt	=	"Auto Stop Task"
service_dl_default_port	=	"Use the default port range"
service_dl_desc	=	"Enable Download Station to use {0} as a download center."
service_dl_enable	=	"Enable Download Station 2"
service_dl_from	=	"From"
service_dl_hint_many_tasks	=	"Hint: More active download tasks might result in lower system performance."
service_dl_manual_port	=	"Use the following port range"
service_dl_maximal_tasks	=	"Maximum active download tasks"
service_dl_now	=	"Immediately"
service_dl_order	=	"Process Order"
service_dl_order_by_request	=	"By date created"
service_dl_order_by_user	=	"By user (one task at a time)"
service_dl_schedule	=	"Daily"
service_dl_start_desc	=	"Download Schedule"
service_dl_title	=	"Download Service"
service_dl_to	=	"to"
service_edit_vhost	=	"Virtual Host"
service_enable	=	"Enable"
service_file_browser_log	=	"Enable File Station log"
service_file_customized_tip	=	"Login at"
service_file_dl_common	=	"Common setting"
service_file_enable_customized	=	"Enable File Station (HTTP)"
service_file_enable_https	=	"Enable File Station (HTTPS)"
service_file_https_warning	=	"The {0} is not enabled. Do you want to go to the setup page now?"
service_file_image_tip	=	"Upload banner image"
service_file_image_upload_success	=	"Successfully uploaded the image."
service_file_nofileselected_tip	=	"Please select a file."
service_file_not_image	=	"This is not an image file."
service_file_selected_noupload	=	"The image file is not uploaded yet."
service_file_transfer_log_desc	=	"Enable File Station log to record the activities of all users."
service_file_upload	=	"Upload"
service_filebrowser_transfer_log_desc	=	"Enable File Station log to record the activities of all users."
service_firewall_setting_failed	=	"Failed to change firewall settings."
service_ftp	=	"Enable FTP service"
service_general_service_bootup_fail	=	"Service [{0}] failed to start. Please contact Synology support for assistance."
service_host_name	=	"Hostname"
service_howto	=	"Read Tutorial"
service_http_serv_options	=	"HTTP Service"
service_httpport	=	"Add additional HTTP port"
service_httpsport	=	"Add additional HTTPS port"
service_illegal_csr	=	"Invalid certificate signing request. Please select and upload a valid CSR file."
service_illegal_inter_crt	=	"Invalid intermediate certificate. Please import the correct certificate."
service_illegel_crt	=	"Invalid certificate"
service_illegel_key	=	"Invalid private key."
service_interface	=	"Interface"
service_internet_available	=	"Internet accessible"
service_itunes_enable	=	"Enable iTunes Service"
service_key_not_match	=	"Private key and certificate are not matched."
service_lan_available	=	"LAN accessible"
service_legal_notice	=	"Users must comply with all applicable laws and regulations when using this download service."
service_max_vhosts	=	"You can only configure up to {0} virtual hosts."
service_max_vhosts_error	=	"The value of "maxvhost" must be equal to or more than 1."
service_mysql	=	"Enable MySQL"
service_netbkp_enable	=	"Enable Network Backup Service"
service_netbkp_synorsync_desc	=	"Set your _DISKSTATION_ as the backup destination for other _DISKSTATION_ devices."
service_netbkp_synorsync_enable	=	"Synology Backup Mode"
service_netbkp_tradrsync_desc	=	"Set your _DISKSTATION_ as the backup destination for rsync clients.<br><font class="red-status"><b>Note: </b></font>"Shared Folder Sync", "Time Backup", and "LUN Backup" are not supported in this mode."
service_netbkp_tradrsync_desc1	=	"Choose this mode to make your _DISKSTATION_ a rsync server when backing up files."
service_netbkp_tradrsync_enable	=	"Rsync Backup Mode"
service_netbkp_warn_customized_rsync	=	"<font class="note-font"><b>Warning: </b></font>Using customized rsync configuration will disable the "Shared Folder Sync" and "Time Backup" services. Do you want to continue?"
service_netbkp_warn_disable_deps	=	"<font class="red-status"><b>Warning: </b></font>Disabling the network backup service will also disable the "Shared Folder Sync" and "Time Backup" services. Do you want to continue?"
service_network_interface_change	=	"Network interface settings have been changed. Please select a new network interface."
service_network_interface_deny_by_firewall	=	"Some network interfaces are blocked by firewall"
service_partial_netif_allow	=	"Only partial network interface allowed"
service_partial_network_allow	=	"Only some IP addresses allowed"
service_photo	=	"Enable Photo Station 5"
service_photo_hide_icon	=	"Hide Photo Station from Main Menu"
service_photo_login	=	"Enable Password Protection"
service_photo_login_desc	=	"To grant users the access right to the shared folder "photo," go to the "System > Shared Folder" page."
service_photo_personal	=	"Enable Personal Photo Station service"
service_photo_personal_enable	=	"Enable Personal Photo Station"
service_photo_personal_station	=	"Photo Station"
service_photo_personal_title	=	"Personal Photo Station"
service_photo_public	=	"Set new folders as public albums"
service_photo_reindex	=	"Re-index"
service_photo_run	=	"Click the following link to browse your photos."
service_photo_stop	=	"The service is disabled now. Please sign in to the "Web Service" page to enable it and read the tutorial."
service_port_config_not_specify	=	"No port specified"
service_port_in_used	=	"This port number is reserved for system use only. Please enter a different number."
service_portforward_setting	=	"Port forwarding"
service_portforward_setting_failed	=	"Failed to change port forwarding settings."
service_portmapping_clean	=	"Port-forwarding settings are deleted. The possible reason is that the gateway has been rebooted, or the settings are erased by other devices on the LAN."
service_portmapping_conflict	=	"The port has been used. Please check if it conflicts with the Gateway settings."
service_portmapping_encrypt	=	"Encrypted"
service_portmapping_error_unknown	=	"Unknown Error"
service_portmapping_port	=	"Ports"
service_portmapping_response_error	=	"Port-forwarding error occurred. The possible reason is that the UPnP function has been disabled, network disconnection, or unable to interpret response."
service_portmapping_service_close	=	"Service is not enabled."
service_portmapping_service_type	=	"Network Service"
service_portmapping_services_disable	=	"Please note the below services are disabled"
service_portmapping_upnp_title	=	"Select the service type you want to forward:"
service_quickconnect_available	=	"QuickConnect accessible"
service_rsync	=	"rsync"
service_rsync_desc	=	"Enable the rsync service to render your _DISKSTATION_ a backup destination for another Synology server or rsync-compatible server via the following services: {0}."
service_rsync_dsm_server	=	"Shared Folder Sync, LUN Backup, and rsync backup"
service_rsync_enable	=	"Enable rsync service"
service_rsync_nondsm_server	=	"Shared Folder Sync and rsync backup"
service_secureui	=	"Enable HTTPS connection"
service_select_firewall_interface	=	"Manage the firewall settings of the network interface specified below:"
service_set_httpport	=	"Enter the port number"
service_smb_transfer_log	=	"Enable Transfer Log"
service_ssl_crt	=	"Certificate"
service_ssl_crt_desc	=	"Please import a certificate you trust."
service_ssl_inter_crt	=	"Intermediate certificate"
service_ssl_inter_crt_desc	=	"Import your intermediate certificate (optional)."
service_ssl_key	=	"Private Key"
service_ssl_key_desc	=	"Import a certificate issued by a certificate authority, the private key paired with the certificate, and the intermediate certificate (optional)."
service_ssl_no_file	=	"Please select the files."
service_start_failed	=	"The following services failed to start"
service_status_inprocess	=	"Forwarding. Please wait..."
service_status_is_not_reload	=	"System is busy. Please wait..."
service_status_success	=	"Forwarded"
service_stop_failed	=	"The following services failed to stop"
service_sub_folder	=	"Sub-folder Name"
service_subject	=	"Service"
service_subnet_deny_by_firewall	=	"Some subnets are blocked by firewall"
service_surv_customized_tip	=	"Login at"
service_system_service_bootup_fail	=	"System internal service [{0}] failed to start. Please contact Synology support for assistance."
service_testing	=	"Testing"
service_unknown_cypher	=	"Invalid cipher type. Please use another certificate and private key."
service_upload_ca	=	"Import Certificate"
service_upload_ca_file	=	"Import Certificate"
service_vhost_conflict	=	"Duplicate [Host Name] and [Port] combinations were found in the list. Please modify your configurations."
service_vhost_empty_error	=	"The value of [Sub-folder Name], [Host Name] and [Port] cannot be empty."
service_vhost_port	=	"Port"
service_vhost_type	=	"Protocol"
service_virtual_host_list	=	"Virtual Host List"
service_wanconfig_detecting	=	"Detecting"
service_wanconfig_gateway_addr_in	=	"Internal address"
service_wanconfig_gateway_addr_out	=	"External Address"
service_wanconfig_gateway_no_addr	=	"&lt;Cannot detect external address&gt;"
service_wanconfig_gateway_not_set_warn	=	"You haven't set a gateway IP address."
service_wanconfig_gateway_title	=	"Gateway Information"
service_wanconfig_status	=	"Status"
service_wanconfig_tip	=	"Use this page to set up the Internet settings on the gateway in order to forward external ports to network services on the server automatically. (<font class="red-status">For users using a UPnP gateway, please enable the UPnP function on the gateway before setting.</font>)"
service_wanconfig_title	=	"DDNS"
service_wanconfig_upnp_normal	=	"UPnP function is enabled."
service_wanconfig_upnp_notdetect	=	"UPnP function is not detected."
service_wanconfig_waiting	=	"Please wait a moment."
service_web	=	"Enable Web Station"
service_web_apache_module_select	=	"Select Apache module"
service_web_apache_module_selector	=	"Apache module Selector"
service_web_app	=	"Web Applications"
service_web_localuser	=	"Personal website"
service_web_localuser_enable	=	"Enable personal website"
service_web_localuser_uhconflict	=	"This action will disable personal website function. Are you sure you want to continue?"
service_web_localuser_warning	=	""User Home" is disabled now. Please go to the "User" page to enable it first."
service_web_php_cache_enabled	=	"Enable PHP cache"
service_web_php_display_errors	=	"Enable display_errors to display PHP error message"
service_web_php_ext_select	=	"Select PHP extension"
service_web_php_ext_selector	=	"PHP extension List"
service_web_php_global	=	"Turn on PHP configuration option register_globals."
service_web_php_openbasedir_customize	=	"Customize PHP open_basedir"
service_web_php_openbasedir_customize_warning	=	"If open_basedir does not contain {0}, Web Station might encounter errors. Are you sure you want to continue?"
service_web_php_openbasedir_warning	=	"<font class="note-font">Note: </font>If errors occur due to wrong setting of open_basedir, uncheck "Customize PHP open_basedir" and click "Apply" to restore to system default."
service_web_php_safemodeexecdir_enabled	=	"Enable PHP safe_mode_exec_dir access limitation"
service_web_php_safemodeexecdir_warning	=	"<font color="red">Important: </font>It is recommended that you turn on the [Enable PHP safe_mode_exec_dir access limitation] option for security reasons."
service_web_php_setting	=	"PHP Settings"
service_web_run	=	"Click the following link to open your web site."
service_web_secureui	=	"Enable HTTPS connection for web services"
service_web_stop	=	"The service is disabled now. Please sign in to the "Web Services" page to enable it and read the tutorial."
service_webdav	=	"Enable WebDAV"
service_webdav_anonymous	=	"Enable Anonymous WebDAV"
service_webdav_anonymous_desc	=	"Users can access shared folders with the "anonymous" user name while WebDAV login. Make sure the "Anonymous WebDAV" user has been assigned correct access rights on the "Shared Folder" page."
service_webdav_depth_infinity	=	"Enable DavDepthInfinity"
service_webdav_desc	=	"Enable WebDAV to allow users to edit and manage files on _DISKSTATION_ remotely."
service_webdav_enable_depth_infinity	=	"Enable DavDepthInfinity"
service_webdav_https	=	"Enable WebDAV HTTPS connection"
service_webdav_transfer_log	=	"Enable WebDAV log"
service_wrong_https_port	=	"443 is the default port number for the HTTPS service. Please enter a different number instead."
service_wrong_port	=	"Please use numerals in the port number. The port number can not be 0."
service_wrong_port2	=	"The port number cannot be greater than 65535."
service_wrong_port3	=	"80 is the default port number for the HTTP service. Please enter a different number if you want to add an additional port."
service_wrong_port4	=	"443 is the default port number for HTTPS service. Please enter a different number if you want to add an additional port."
smb_time_machine_enable	=	"Enable Bonjour Time Machine broadcast via SMB"
ssdp_title	=	"SSDP"
status_normal	=	"Normal"
storage_service	=	"Storage Service"
synocontentextractd	=	"synocontentextractd"
synocrond	=	"Synology Cron Daemon"
synotifyd	=	"synotifyd"
syslog_accounting	=	"Syslog Statistics"
syslog_logrotate	=	"Log Rotation"
syslog_notification	=	"Syslog Notification"
test_port_need_enabled_service	=	"Please select at least one enabled service with the port forwarding rule configured to test port connection."
time_machine_enable_tiering_warning	=	"Bonjour Time Machine broadcast will be disabled for this shared folder."
time_machine_tiering_tip	=	"Bonjour Time Machine broadcast does not support Synology Tiering."
tip_dsm_fqdn_NetBIOS	=	"If you enter a NetBIOS domain name (e.g. synologynas), you can access _OSNAME_ in the same local network via the URL (e.g. http(s)://synologynas.local)."
title_internet	=	"Internet Services"
title_lan	=	"LAN Services"
transfer_log_append	=	"Append"
transfer_log_change_lock_state	=	"Change Lock State"
transfer_log_copy	=	"Copy"
transfer_log_create	=	"Create"
transfer_log_create_folder	=	"Create folder"
transfer_log_delete	=	"Delete"
transfer_log_delete_folder	=	"Delete folder"
transfer_log_download	=	"Download"
transfer_log_extend_retention	=	"Extend Retention"
transfer_log_lock	=	"Lock"
transfer_log_move	=	"Move"
transfer_log_permission_change	=	"Permission change"
transfer_log_property_set	=	"Set Property"
transfer_log_read	=	"Read"
transfer_log_rename	=	"Rename"
transfer_log_settings	=	"Log Settings"
transfer_log_settings_desc	=	"Select the file operation events that you want to monitor via the Transfer Log. The more events you select, the more likely it is for the system performance to be affected."
transfer_log_unlock	=	"Unlock"
transfer_log_upload	=	"Upload"
transfer_log_worm_lock	=	"Lock (WriteOnce)"
transfer_log_worm_state_change	=	"Change Lock State (WriteOnce)"
transfer_log_write	=	"Write"
vdsm_internal_service	=	"Virtual DSM Internal Service"
view_calendar_list	=	"View calendar list"
warning_select_dest	=	"Please select the destination folder first."
web_error_config	=	"Web Station failed to start due to incorrect configuration file. Please contact the Synology technical support team for assistance."
webdav_disable_confirm_msg	=	"Disabling WebDAV will disable the connection of DS file to your _DISKSTATION_ via QuickConnect. Are you sure you want to continue?"
webdav_https_disable_confirm_msg	=	"Disabling WebDAV HTTPS will disable the connection of DS file (HTTPS) to your _DISKSTATION_ via QuickConnet. Are you sure you want to continue?"
wstransfer_title	=	"WS-Discovery"

[setupwizard]
applying_setting	=	"Applying system settings..."
enterpwd_descr	=	"Please enter the admin password."
final_text	=	"Settings applied successfully. {0} will redirect the browser to {1} after you click {2}."
final_title	=	"Finished."
intime_desc	=	"Set the date and time"
mac_descr	=	"MAC OS zone setting"
netinfo_title	=	"Network Setup"
next_text	=	"Click {0} to start, and follow the instructions to complete setup."
servinfo_title	=	"Network File Protocols"
summary_title	=	"Confirm settings."
sysinfo_title	=	"System Information"
timeinfo_title	=	"Time Setup"
welcome	=	"The System Setup Wizard will help you configure the basic system settings in the following steps:"
welcome_title	=	"Welcome to System Setup Wizard."
wizard_title	=	"System Setup Wizard"
workgroup_descr	=	"Windows workgroup setting"

[share]
acl_cleaning	=	"Removing ACL permissions..."
action	=	"Action"
actor	=	"Initiator"
ask_if_clean_acl	=	"Do you want to remove all ACL permissions within the shared folder?"
btn_change_volume	=	"Move"
btn_decrypt_share	=	"Decrypt"
btn_encrypt_share	=	"Continue"
c2_need_package	=	"The Hybrid Share package is not enabled. Please go to Package Center to check its status."
c2_no_package_status	=	"Hybrid Share package disabled"
c2_not_support	=	"Unable to mount a Hybrid Share folder. C2 Storage is not supported in your area."
c2_share_delete_black_list_item	=	"Data with extensions specified in File Type Exclusions"
c2_share_folder	=	"Hybrid Share Folder"
c2_transform_to_c2share	=	"Convert to Hybrid Share Folder"
c2share_delete_confirm	=	"Any changes in the Hybrid Share folder not yet synced to C2 Storage"
clean_home_recycle_bin	=	"Empty the recycle bins of all users' "home""
clean_home_recycle_bin_select_desc	=	"Choose the recycle bin you wish to empty"
clean_homes_recycle_bin	=	"Empty the recycle bin of "homes""
common_automount	=	"Automount"
copy_file	=	"Copying files"
copy_waiting	=	"Preparing to copy data. Please wait..."
cp_file_size	=	"Size of copied files:"
create_c2_share_folder	=	"Mount Hybrid Share Folder"
create_share	=	"Create Shared Folder"
create_wizard_adv_setting	=	"Configure advanced settings"
create_wizard_basic_info	=	"Set up basic information"
create_wizard_confirm_setting	=	"Confirm settings"
create_wizard_enabled	=	"Enabled"
create_wizard_no_volume	=	"No volumes available to create shared folder. Please go to Storage Manager to solve this issue."
create_wizard_perm_setting	=	"Configure user permissions"
create_wizard_quota	=	"Quota"
create_wizard_title	=	"Shared Folder Creation Wizard"
dedupe_disable_quota_tip	=	"Once data deduplication is enabled for this volume, shared folder quota will be disabled."
del_hard_check_fail	=	"This action cannot be performed due to the following reasons:"
del_soft_check_fail	=	"The system is processing the task(s) below. Click Delete to continue."
dialog_title_remove_share	=	"Remove shared folder"
disable_mount_confirm	=	"All {0} will be umounted when disabling the service. Are you sure you want to continue?"
dr_readonly_register_message	=	"This shared folder is the destination of replication task(s)."
edit_hard_check_fail	=	"This action cannot be performed due to the following reasons:"
edit_soft_check_fail	=	"The system is processing the task(s) below. Click 'Yes' to continue."
empty_recycle_items	=	"items"
enable_homes_recycle_tip	=	"This setting will be applied to all "home" folders."
enable_share_compress_help	=	"Data checksum must be enabled first. This option cannot be modified once the shared folder is created."
enable_share_quota_desc	=	"enable the quota to restrict the size the shared folder can use"
encrypt_share_service_pause_confirm	=	"If the shared folder {0} is unmounted, the following service(s) will be stopped: {1}. <br><br>Do you want to unmount the shared folder?"
encryption_password_invalid	=	"Encryption key cannot include equals signs (=), commas (,), or colons (:)"
encryption_wrong_key	=	"Invalid key. Please enter or import a valid key for decryption."
enough_space_check	=	"Checking available space"
error_acl_setfail	=	"Failed to configure Windows ACL, please contact Synology Inc."
error_badname	=	"The shared folder name is invalid or it contains invalid characters."
error_cluster_share	=	"The following shared folders are being used by PetaSpace. Please go to PetaSpace to delete them."
error_cntapymtl_sh	=	"Please select one shared folder only to apply the settings."
error_cntapyno_sh	=	" Please select one shared folder first."
error_encrypt_reserve	=	"You can only encrypt a non-system reserved shared folder"
error_ftp_anonymousroot	=	"Please change the FTP anonymous root folder before deleting the following shared folder(s):"
error_ftp_userchroot	=	"The following shared folder has been set as an FTP root directory. Please change the setting before deleting it."
error_ftp_userchroot_plural	=	"The following shared folders have been set as FTP directories. Please change the settings before deleting them."
error_home_service	=	"Before deleting the following shared folders, disable user home service at Control Panel > User & Group > Advanced."
error_illegal_acl_setting	=	"ACL permissions within this shared folder will be disabled. <br>Are you sure you want to continue?"
error_key_file	=	"The encryption key you imported is invalid. Please import a valid encryption key."
error_mount_point_delete	=	"Please unmount any virtual drive(s) or remote folder(s) before deleting the following shared folder(s):"
error_mount_point_restore	=	"Failed to restore the shared folder. Please unmount the virtual drive(s) or remote folder(s) within the shared folder and try again."
error_mounted_encrypt_restore	=	"Please unmount the encrypted shared folder, and try again."
error_nameused	=	"The shared folder name is either reserved for system use only or already existed. Please enter a different name."
error_noname	=	"No shared folder name was entered."
error_noneshare	=	"No shared folders now. To create shared folders, please go to the Shared Folder page."
error_package_uninstall	=	"Please uninstall {0} before deleting the following shared folder(s):"
error_packages	=	"Please disable {0} before deleting the following shared folder(s):"
error_replica_demote	=	"The following shared folder(s) have been used for replication tasks and cannot be deleted:"
error_rmvnone_sh	=	"You did not select any shared folders to remove."
error_rmvpublic	=	"The default shared folder cannot be deleted."
error_sharename_too_long	=	"The share name is too long."
error_too_many_acl_rules	=	"The number of Windows ACL rules for this shared folder exceeds the system limit."
error_too_many_acl_rules_with_sharename	=	"The number of Windows ACL rules for this shared folder "{0}" exceeds the system limit."
error_toomanyafpsh	=	"When accessed via AFP, only up to 255 shared folders will be displayed (in alphabetical order)."
error_toomanysh	=	"The maximum number of shared folders is {0}."
error_toomanysnapshot	=	"You have reached maximum limit of {0} retained snapshots for each shared folder, or {1} retained snapshots in total for the system."
error_volume_not_found	=	"Volume not found. Please check if the volume status is normal."
error_volume_read_only	=	"This volume is currently read-only."
error_worm_share	=	"WriteOnce shared folders in Compliance mode cannot be deleted."
error_worm_snapshot	=	"Unable to perform this operation because some shared folders have immutable snapshots."
feasibility_remove_empty_file	=	"This action cannot be performed because a background task is currently deleting invalid stubs. Wait a few minutes and try again, or cancel the background task in the upper-right corner of the desktop and then try again."
get_lock_failed	=	"This shared folder is locked by another process. Please try again later."
homes_recycle_admin_only_tip	=	"This setting will be applied to all "home" folders."
init_status	=	"Preparing"
iso_mount_enable	=	"Enable virtual drives"
ldap_group	=	"LDAP groups"
ldap_user	=	"LDAP users"
mount_admin_only	=	"Administrators only"
mount_date	=	"Mounted on"
mount_image_path	=	"Image path"
mount_point_not_empty	=	"Something went wrong when mounting the shared folder. Please contact Synology support."
move_background_task_title	=	"Moving Shared Folder"
move_to_from_petavolume	=	"Shared folder located in Btrfs (Peta Volume) cannot be moved to non-Btrfs (Peta Volume) and vice versa."
nfs_not_enabled	=	"NFS service is not enabled. Please go to {0} to enable it."
no_encryption_help_link	=	"https://www.synology.com/knowledgebase/DSM/help/DSM/AdminCenter/file_share_create"
no_encryption_reason	=	"To mount this encrypted shared folder for use, please refer to {0} for instructions."
no_such_share	=	"This shared folder doesn't exist."
note_enable_home_recycle_bin	=	"To manage Recycle Bin, go to {0}Shared Folder{1}, select the "homes" folder, and click Edit."
notice_adv_permission_necessity	=	"We do not recommend enabling this option unless absolutely necessary."
notice_s2s_permission	=	"For shared folders that have performed Shared Folder Sync, advanced share permissions will be enabled by default."
notice_service_dependency	=	"If this shared folder is being used by other services, we recommend storing the key in the system partition. Do you want to continue?"
percentage	=	"Process percentage:"
permission	=	"Permissions"
peta_share_control_panel_vol_desc	=	"PetaSpace"
petavolume_share_creation_limitation	=	"This name is reserved for package use and cannot be used for naming shared folders in Btrfs (Peta Volume)."
photo_permission_control_notify	=	"Please go to Photo Station for the permission settings."
prompt_privilege	=	""Shared Folder""
quota_too_low_warning	=	"Warning: The system cannot write new data into this shared folder if you set a quota that is smaller than its current size ({0})."
recycle_bin	=	"Recycle Bin"
recycle_bin_enabled_admin_only	=	"Enabled, administrators only"
rename_stop_service_confirm	=	"The following service(s) will pause while renaming the shared folder: {0}. <br><br>Do you want to apply these changes?"
rv_cifs_enable	=	"Allow {0} connection"
rv_connection_list	=	"Connection list"
rv_mount_enable	=	"Enable remote folder"
saved	=	"Saving of"
search_share	=	"Search"
select_shares	=	"Select shared folders"
set_right	=	"Go to user permission setup page after the shared folder has been created"
share	=	"Shared Folder"
share_acl_desc	=	"You can use Windows Access Control List (ACL) to establish access control policies for individual files or directories in the shared folder. If ACL is enabled for a shared folder, only users with shared folder and ACL permissions can access the shared folder."
share_acl_edit_remind	=	"To modify ACL permissions for a file or directory, right-click it in Windows Explorer and choose Properties > Security."
share_acl_enable	=	"Grant "Full Control" to Everyone while creating the shared folder"
share_acl_enable_desc	=	"Ticking this option will allow all users to modify the ACL permissions for any file or directory in the shared folder; otherwise, only admin and the owner of the file or directory can modify its ACL permissions."
share_acl_enable_desc_for_edit_share	=	"In general, only admin and the file owner can modify ACL permissions. If you want to allow other accounts to modify the permissions, please give them the permission of [Change permissions]."
share_acl_enable_desc_v2	=	"Enable this option to edit ACL permissions for the shared folder and its contents using File Station or Windows Explorer. If you disable this option, you will not be able to edit ACL permissions, but the ACL information set before will be retained."
share_acl_enable_v2	=	"Allow editing Windows Access Control List"
share_acl_permission_full	=	"Full Control"
share_acl_permission_listdir	=	"List Folder Contents"
share_acl_permission_modify	=	"Modify"
share_acl_permission_read	=	"Read"
share_acl_permission_readexecute	=	"Read & Execute"
share_acl_permission_write	=	"Write"
share_acl_set_default_rule	=	"When you enable this option for the first time, the system will set this shared folder's default ACL to "Everyone - Modify"."
share_acl_share_not_support	=	"Shared folders reserved for system use do not support ACL. Please refer to Help for more information."
share_acl_title	=	"Windows ACL"
share_acl_volume_not_support	=	"The volume where the share is located does not support ACL. Please refer to Help for more information."
share_add	=	"Create New Shared Folder"
share_add_deny	=	"No access"
share_add_permission	=	"Add"
share_adv_edit_title	=	"Edit Advanced Share Permissions"
share_advance_permissions	=	"Advanced Permissions"
share_advance_privileges	=	"Advanced"
share_advance_privileges_desc	=	"Configure the advanced permissions of this shared folder. When accessing this folder with File Station, FTP, or WebDAV, the following settings will be applied in addition to the current permissions."
share_advanced_settings	=	"Advanced Settings"
share_all_acl_mode	=	"share is all acl mode"
share_all_recycle_bin_clean_warn	=	"Warning: Recycle Bins under all user home directories and shared folders will be emptied. Are you sure you want to continue?"
share_already_exist	=	"A shared folder with the same name already exists. Please enter another name."
share_block_usb_ntfs_right	=	"The NTFS file system is not editable."
share_block_usb_right	=	"The backup folder is not editable."
share_can_migration	=	"not all acl mode share"
share_cannot_delete_for_reserved	=	"The following shared folders are reserved for system use and cannot be deleted:"
share_cannot_delete_for_service	=	"Failed to delete this shared folders because the following services are not disabled:"
share_cannot_delete_for_volume_expand	=	"Failed to delete the following shared folders because the volume is being expanded:"
share_cannot_move_fstype_not_support	=	"This shared folder is used for replication tasks, but [Snapshot Replication] feature is not supported by the destination volume."
share_cannot_move_replica_busy	=	"Replication task(s) of shared folder are in progress. Please wait for the completion or stop the syncing by going to [Snapshot Replication]."
share_cannot_rename_since_expand	=	"Failed to rename the shared folder because the volume is being expanded."
share_cannot_rename_since_service_enable	=	"Please disable the following services before renaming the shared folders."
share_cfrmrmv	=	"Are you sure you want to delete this shared folder? "
share_cfrmrmv_multiple	=	"Are you sure you want to delete the following shared folders?"
share_cfrmrmv_num	=	"Are you sure you want to delete {0} shared folders?"
share_clean_all_recycle_bin	=	"Empty all Recycle Bins"
share_clean_recycle_bin	=	"Empty Recycle Bin"
share_clean_recycle_bin_abort	=	"Cancel"
share_clean_shell_files	=	"Delete Invalid Stubs"
share_clean_shell_files_warn	=	"<a class="link-font" target="_blank" href="https://sy.to/stub">Stubs</a> that can no longer be linked to the actual content in the cold tier will be deleted in a background task. Do you want to continue?"
share_clone	=	"Clone from shared folder {0}"
share_comment	=	"Description"
share_compliant_worm_always_enable_cow	=	"This option will always be enabled when the WriteOnce shared folder is in Compliance mode."
share_compress_disabled_when_enc_is_on_tooltip	=	"This option is disabled when encryption is enabled."
share_compress_edit_desc	=	"The new compression rule will only be applied to newly added files. Existing files will not be affected."
share_compress_enable	=	"Enable file compression"
share_compress_tip	=	"Enabling file compression will result in lower system performance of the shared folder. We recommend enabling this option on those shared folders storing cold data. This option can be dynamically modified without interrupting system services."
share_compress_to_encrypt_confirm	=	"Encrypting this shared folder will disable its compression. Are you sure you want to encrypt this shared folder?"
share_compress_usage_enable_reminder	=	"To display detailed data here, go to <b>Storage Manager</b> > <b>Storage</b> > select the target volume > <b>More</b> > <b>Settings</b>, and select <b>Enable usage detail analysis</b>."
share_compression	=	"File Compression"
share_confirm_desc	=	"Click "OK" to save."
share_conflict_name_on_new_volume	=	"The folder name already exists on the target volume. Do you want to rename the folder on the target volume to {0} and continue?"
share_conflict_on_new_volume	=	"Unable to perform this operation. A folder on the target volume has the same name as the folder to be moved. Please change the name of the folder to be moved and try again."
share_cow	=	"Data Integrity Protection"
share_cow_desc1	=	"To ensure service quality, we recommend not enabling data checksum if you are:"
share_cow_desc2	=	"Hosting database or virtual machine in this shared folder"
share_cow_desc3	=	"Storing Surveillance Station recordings in this shared folder"
share_cow_desc4	=	"Running services that require a small and random write pattern"
share_cow_desc5	=	"Backing up this entire _DISKSTATION_ with Active Backup for Business Agent"
share_create_success	=	"The shared folder has been created successfully and is ready for use.<br>Refer to Help for usage instructions."
share_create_success2	=	"The shared folder has been created successfully and is ready for use."
share_data_protection_encryption	=	"Protect this shared folder by encrypting it"
share_data_protection_encryption_desc	=	"Encrypt the content of this shared folder for enhanced data protection. <a href="https://kb.synology.com/DSM/tutorial/How_to_encrypt_and_decrypt_shared_folders_on_my_Synology_NAS" target="_blank" class="link-font">Learn more</a>"
share_data_protection_tab_title	=	"Enable additional security measure"
share_data_protection_worm	=	"Protect this shared folder with WriteOnce"
share_data_protection_worm_desc	=	"Enable the WriteOnce feature, based on the WORM (Write Once, Read Many) technology, to protect files from being modified, deleted, or renamed for a specified retention period. <a href="https://sy.to/writeonceintro" target="_blank" class="link-font">Learn more</a>"
share_dbclick_group_remind	=	"Double click to see group members."
share_delete	=	"Delete Shared Folder"
share_delete_checking	=	"Delete Checking..."
share_delete_confirm	=	"I understand the selected shared folder will be permanently removed and cannot be recovered."
share_delete_confirm_more	=	"I understand that the selected shared folders will be deleted. The following will also be removed and cannot be recovered:"
share_delete_confirm_multiple	=	"I understand the selected shared folders will be permanently removed and cannot be recovered."
share_delete_mixed_tierfs_tip	=	"Unable to delete the shared folders. Make sure the data tiering feature is disabled for the folders you select."
share_disable_download	=	"Disable file downloading"
share_disable_list	=	"Disable directory browsing"
share_disable_modify	=	"Disable modification of existing files"
share_disable_recycle_bin	=	"Disable recycle bin"
share_disconnect_from_hot_tier	=	"Disconnect from hot tier"
share_disconnect_from_hot_tier_warn	=	"This will disconnect the shared folder from its source folder. If the hot tier is still accessible, we recommend removing the source folder from the plan and using this folder directly. Learn more about <a class="link-font" target="_blank" href="https://sy.to/tiering_stop_link_hot_tier">how disconnection affects data access</a>."
share_domain_group	=	"Domain groups"
share_domain_user	=	"Domain users"
share_edit_right	=	"View/Edit"
share_edit_title	=	"Edit Shared Folder {0}"
share_enable_recycle_bin	=	"Enable Recycle Bin"
share_enc1_conflict_name_on_new_volume	=	"Operation failed because an encrypted folder on the target volume has the same name as the folder you are going to move."
share_enc_conflict_name_on_new_volume	=	"The destination contains an encrypted shared folder with identical name. Therefore, this action cannot be done."
share_enc_ext4_only	=	"Encrypted share is only supported on EXT3/EXT4 file system."
share_encrypt_max_component_length	=	"The name of file or shared folder is too long to be encrypted. Please shorten it to less than 45 characters before encryption."
share_encrypt_to_compress_confirm	=	"Compressing this shared folder will disable its encryption. Are you sure you want to compress this shared folder?"
share_encrypting	=	"Operations on shared folders are in progress"
share_encryption	=	"Encryption"
share_encryption_add_to_keymanager	=	"Add encryption key to Key Manager"
share_encryption_autodecrypt	=	"Mount automatically on startup"
share_encryption_decrypt	=	"Mount"
share_encryption_decrypt_by_keymanager	=	"Enter passphrase for Key Manager"
share_encryption_decrypt_by_keymanager_system_partition	=	"Use an encryption key stored in Key Manager"
share_encryption_desc_enable_keymanager	=	"How to enable Key Manager to manage encryption keys"
share_encryption_enable	=	"Encrypt this shared folder"
share_encryption_encrypt	=	"Unmount"
share_encryption_encrypt_confirm	=	"Are you sure you want to unmount this shared folder?"
share_encryption_exportkey	=	"Export key"
share_encryption_importfrom	=	"Import encryption key:"
share_encryption_key	=	"Encryption key"
share_encryption_key_confirm	=	"Confirm key"
share_encryption_key_confirm_mismatch	=	"The encryption key and the confirmation key do not match."
share_encryption_key_download	=	"The encryption key will be downloaded automatically. We strongly recommend saving your encryption key properly. An encryption key is needed to mount a shared folder and cannot be recovered if lost."
share_encryption_key_length	=	"Encryption key size (bit)"
share_encryption_keyinput	=	"Enter encryption key"
share_encryption_keymanager	=	"Use Key Manager to manage encryption keys"
share_encryption_keymanager_desc	=	"Your Key Manager is not initialized yet. Initialize it to manage encryption keys and mount shared folders automatically on start-up."
share_encryption_keymanager_help_launch	=	"Learn how to initialize."
share_encryption_warning_desc	=	"Please note the following:"
share_encryption_warning_length	=	"The name of a file or a folder within the encrypted shared folder cannot exceed 143 English characters or 47 Asian (CJK) characters."
share_encryption_warning_nfsremove	=	"And the existing NFS rules will be removed."
share_encryption_warning_perf	=	"The performance of the encrypted shared folder will be decreased."
share_encryption_warning_savekey	=	"There is no way to rescue the encrypted data if the encryption key is lost. We strongly suggest that you save the key."
share_encryption_warning_time	=	"This time needed for the action depends on the size of the shared folder. The shared folder will be inaccessible until the action is completed."
share_errapply	=	"Failed to change the shared folder settings. Please check system log."
share_errdelsata	=	"The shared folder was automatically created when you inserted the eSATA disk. To remove the shared folder, please eject the eSATA disk."
share_errdelusb	=	"The shared folder was automatically created when you inserted the USB disk. To remove the shared folder, please eject the USB disk."
share_error_use_expanded_volume	=	"Shared folders cannot be created on the volumes located in the expansion unit."
share_errrndef	=	"You can only change the name of non-system reserved shared folder."
share_filter_text	=	"Search"
share_folder	=	"Shared folders to back up"
share_gluster_share	=	"The following cluster share(s) cannot be deleted:"
share_gpnamedesc	=	"* The ones started with @ are groups."
share_hidden_status	=	"Status"
share_hidden_tiering_bucket_tip	=	"Selected by default because this shared folder was created via a tiering plan."
share_hide	=	"Hide this shared folder in "My Network Places""
share_hide_in_samba	=	"Hidden in "My Network Places""
share_hide_in_windows	=	"Hide in Windows File Explorer"
share_hide_unreadable	=	"Hide sub-folders and files from users without permissions"
share_hide_unreadable_tiering_bucket_tip	=	"Selected by default because this shared folder was created via a tiering plan. Applies to SMB, AFP, and File Station access."
share_hide_without_perm	=	"Hide from users without permissions"
share_inherit	=	"Group Permissions"
share_instruct1	=	"Select shared folders"
share_integrity_protection	=	"Integrity Protection"
share_integrity_protection_enable	=	"Enable data checksum for advanced data integrity"
share_integrity_protection_enable_desc	=	"File self-healing and data scrubbing are available to ensure data integrity."
share_integrity_protection_tip	=	"This option is only supported on Btrfs volume and cannot be modified once the shared folder is created."
share_iso	=	"ISO Image"
share_list	=	"Shared folder list"
share_local_group	=	"Local groups"
share_local_user	=	"Local users"
share_move_confirm	=	"I understand the risks related to this action and wish to continue."
share_move_dedup_quota_lost_warning	=	"The quota setting of this shared folder will be removed. You can reconfigure the quota setting after the shared folder has been moved."
share_move_desc_time_spent	=	"This action may take over 10 minutes, depending on the size of the shared folder."
share_move_encryption_tip	=	"Encrypted shared folders cannot be moved when mounted."
share_move_please_note	=	"Please note"
share_move_progress	=	"Moving shared folder... "
share_move_quota_lost_warning	=	"The destination volume does not support shared folder user/group quota, and the related settings will be cleared."
share_move_serivce_stopped	=	"All services will be stopped during this operation."
share_move_snapshot_lost_warning	=	"All snapshots of this shared folder will be removed if the shared folder is encrypted or moved across volumes."
share_move_tiering_bucket_tip	=	"Unable to change volume because this shared folder was created via a tiering plan."
share_moving	=	"Moving shared folder"
share_name	=	"Name"
share_need_transfer	=	"Permissions of this shared folder can be converted to Windows ACL."
share_nfs_crossmnt_apply_confirm	=	"To browse [#snapshot] folders with the NFS protocol, you must enable the cross-mount option in NFS rules first.<br><br>Do you want to enable the cross-mount option in NFS rules now?"
share_nfs_crossmnt_enable_confirm	=	"To browse #snapshot folders via NFS protocol, the cross-mount option in NFS rules must be enabled.<br><br>Are you sure you want to ignore the cross-mount option and proceed to apply changes?"
share_normal_folder_exist	=	"A folder with the same name already exists on this volume. Please enter a different one."
share_notice1	=	"System has adjusted some permission settings to avoid conflicts. Please refer to 'Help' of the shared folder page."
share_notice2	=	"You have not set any user permissions. No user can access this shared folder. Do you want to continue?"
share_offline_tip	=	"The volume where this shared folder is located has ongoing tasks, making this shared folder temporarily unavailable. Go to Storage Manager > Storage to check the progress."
share_on_locked_volume	=	"Unable to access the volume where this shared folder is located. Go to Storage Manager to resolve this issue."
share_permission_acl	=	"Custom"
share_permission_any	=	"Any"
share_permission_button	=	"Advanced Share Permissions"
share_permission_complicated	=	"The Preview column may not reflect the effective permissions if you have enabled advanced share permissions. Go to Shared Folder, select the folder and Edit > Advanced Permissions > Advanced Share Permissions to check effective permissions."
share_permission_custom	=	"Customize"
share_permission_desc	=	"Description"
share_permission_none	=	"No Access"
share_permission_readonly	=	"Read Only"
share_permission_writable	=	"Read/Write"
share_preview	=	"Preview"
share_privilege	=	"Assign permissions"
share_privileges_priority	=	"When there is conflict between user and group permission, the permission is determined by level in the order: <b>NA > RW > RO</b>"
share_quota	=	"Shared Folder Quota"
share_quota_calculating_desc	=	"The shared folder size will be available after the scanning is complete. Go to Storage Manager to check the progress."
share_quota_calculating_progress_desc	=	"The system is scanning this volume."
share_quota_enable	=	"Enable shared folder quota"
share_quota_recalculate_warn	=	"This shared folder is located on {0}, which has data deduplication enabled. After you enable the shared folder quota, the system needs to recalculate the sizes of all the shared folders located on this volume. Do you want to continue?"
share_quota_status_calculating	=	"Calculating"
share_quota_status_unsupported	=	"Unavailable"
share_quota_unsupported_desc	=	"Quota setting for this shared folder is not supported on this device."
share_readonly_not_set_permission_warning	=	"Shared folder access rights cannot be changed. This shared folder is Read only. "
share_recycle_bin_clean_abort_warn	=	"This will cancel the operation of emptying the Recycle Bin. Are you sure you want to continue?"
share_recycle_bin_clean_warn	=	"The Recycle Bin of shared folder will be emptied. Are you sure you want to continue?"
share_recycle_bin_win_desc	=	"You can enable Recycle Bin on the edit page of {0}."
share_reflink_copy	=	"File Fast Clone"
share_reflink_copy_desc	=	"The file fast clone function applies to Btrfs shared folders when accessed via SMB/AFP/File Station. With file fast clone enabled, physical data blocks will be copied only upon modification of the cloned files, which will save storage space."
share_reflink_copy_enable	=	"Enable file fast clone"
share_remote_volume	=	"Remote folder"
share_reset_description	=	"Enable advanced share permissions"
share_reset_privileges	=	"Advanced Share Permissions"
share_reset_privileges_desc	=	"Advanced share permissions offer an additional layer of control over the access permissions of the shared folder. These settings are applied when users access shared folders via the following file services: SMB, AFP, File Station, FTP, and WebDAV. <b>Only users with both advanced share permissions and Windows ACL permissions can access the files and folders in the shared folder.</b>"
share_reset_privileges_desc_hcm	=	"Advanced share permissions offer an additional layer of control over the access permissions of the shared folder. These settings are applied when users access shared folders via the following file services: SMB, File Station. <b>Only users with both advanced share permissions and Windows ACL permissions can access the files and folders in the shared folder.</b>"
share_rights	=	"Permissions"
share_rights_desc	=	"Set access rights for shared folders."
share_rights_select	=	"Choose a shared folder:"
share_rmsdcopyfolder	=	"Removing "{0}" will change the default destination shared folder for SDCopy to "{1}"."
share_rmsdcopyfolderempty	=	"Removing "{0}" will remove the destination shared folder for SDCopy. If you want to use the SDCopy function, please assign a shared folder for SDCopy. "
share_rmusbcopyfolder	=	"Removing "{0}" will change the default destination shared folder for USBCopy to "{1}"."
share_rmusbcopyfolderempty	=	"Removing "{0}" will remove the destination shared folder for USBCopy. If you want to use the USBCopy function, please assign a shared folder for USBCopy. "
share_save_chg_before_reload	=	"Do you want to save the changes before reloading data?"
share_service_disable_confirm	=	"If the shared folder {0} is deleted, the following service(s) will be disabled: {1}."
share_service_disable_confirm_post	=	"Do you want to delete the shared folder(s)?"
share_service_pause_confirm	=	"The following service(s) will pause while applying these changes (services will resume when changes are complete): {0}. <br><br>Do you want to apply these changes?"
share_service_warning	=	"Please disable the following services before deleting the shared folders:"
share_single_delete_confirm_more	=	"I understand that the selected shared folder will be deleted. The following will also be removed and cannot be recovered:"
share_size	=	"Shared Folder Size"
share_snapshot_browsing_enable	=	"Make snapshot visible"
share_snapshot_browsing_enable_desc	=	"Users can browse snapshots in #snapshot folder."
share_snapshot_busy	=	"The shared folder is being used by another process. Please try again later."
share_snapshot_delete_confirm	=	"Any snapshots of the shared folders"
share_snapshot_delete_failed	=	"Failed to delete the following snapshot(s)."
share_snapshot_op_not_support	=	"The operation is not available for this shared folder."
share_snapshot_restore_confirm	=	"Are you sure you want to restore this shared folder to snapshot "{0}"?"
share_snapshot_restore_fail	=	"Failed to restore snapshot {0} to the shared folder."
share_snapshot_restore_lost_warning	=	"All changes to this share since snapshot "{0}" was created will be lost."
share_snapshot_restore_running	=	"Restoring snapshot. Please try again later."
share_snapshot_single_delete_confirm	=	"Any snapshots of the shared folder"
share_snapshot_take_now	=	"Take a snapshot before restoring"
share_snapshot_take_now_desc	=	"Save changes since {0}"
share_space_not_enough	=	"There is not enough free space on the volume."
share_space_saving_ratio_tip	=	"The space saving ratio will display only for the newly compressed shared folders."
share_status	=	"Process status:"
share_subject	=	"General"
share_system_user	=	"System internal user"
share_tab_encryption	=	"Encryption"
share_temporarily_unavailable	=	"Temporarily Unavailable"
share_tiering	=	"Data Tiering"
share_tip1	=	"Shared folder is a storage space where data can be shared between Windows users and Mac users through the network. Refer to Help for access instructions."
share_unnamed	=	"untitled"
share_used	=	"({0} used)"
share_user_permission	=	"User Permissions"
share_user_remove	=	"Remove"
share_user_save	=	"Save"
share_userhome_recycle_bin_clean_warn	=	"The Recycle Bin of all user home directories will be emptied. Are you sure you want to continue?"
share_users	=	"User"
share_visibility	=	"Visibility"
share_worm_appendable	=	"Append-only"
share_worm_auto_lock_desc	=	"Auto Lock automatically locks a file after no changes are made to it for a predefined period."
share_worm_clone_alert_msg	=	"WriteOnce settings will not be cloned to the new shared folder."
share_worm_compliance_checkbox_msg	=	"I fully understand the above statement and want to apply Compliance mode to this WriteOnce shared folder."
share_worm_compliance_confirm_msg	=	"Compliance mode will be applied to this WriteOnce shared folder. Please note that you will not be able to delete this shared folder or the volume/storage pool where it is located. Are you sure you want to continue?"
share_worm_def_lock_duration	=	"Retention"
share_worm_def_lock_duration_forever	=	"Remain locked forever"
share_worm_def_lock_duration_too_low	=	"The minimum length is 1 day."
share_worm_def_lock_duration_too_much	=	"The maximum length is 100 years."
share_worm_def_lock_duration_tooltip	=	"The actual retention period may be longer than the value you specified, due to factors such as shutting down the system or unmounting the volume."
share_worm_def_lock_mode	=	"Lock state"
share_worm_def_lock_mode_tooltip_appendable	=	"In this state, the data in the file cannot be modified or deleted. However, you can continue to add new data to the end of the file."
share_worm_def_lock_mode_tooltip_desc	=	"If a file is locked in "Immutable" state, you can only convert its state to "Append-only" when the file is empty."
share_worm_def_lock_mode_tooltip_immutable	=	"In this state, a file cannot be modified or deleted."
share_worm_disabled_tooltip	=	"This option is only supported in the following scenarios:<br/><ul style="list-style-type: disc; list-style-position: inside; text-indent: -1.4em; padding-left: 1.4em;"><li>On Btrfs volumes.</li><li>When in High Availability mode, both nodes must support WriteOnce.</li></ul>"
share_worm_enable_auto_lock	=	"Enable Auto Lock"
share_worm_immutable	=	"Immutable"
share_worm_lock_wait_time	=	"Auto Lock Timer"
share_worm_lock_wait_time_immediately	=	"Lock immediately"
share_worm_lock_wait_time_too_low	=	"The minimum length is 1 hour."
share_worm_lock_wait_time_too_much	=	"The maximum length is 7 days."
share_worm_mode	=	"Mode"
share_worm_mode_compliance	=	"Compliance mode"
share_worm_mode_desc_compliance	=	"This shared folder or the volume/storage pool where it is located <b>cannot be deleted by anyone</b>."
share_worm_mode_desc_enterprise	=	"This shared folder or the volume/storage pool where it is located <b>can only be deleted by administrators</b>."
share_worm_mode_enterprise	=	"Enterprise mode"
share_worm_not_support_clone	=	"WriteOnce settings will not be cloned to the new shared folder."
share_worm_note1	=	"If you modify the settings, the new settings will only be applied to unlocked files. The settings of locked files will not be changed."
share_worm_note2	=	"1 year = 365 days"
share_worm_period	=	"Set a period"
share_worm_share_disable_recycle_bin	=	"Please note that Recycle Bin is automatically disabled for WriteOnce shared folders. Do you want to continue?"
share_worm_summary_auto_lock	=	"Auto Lock"
share_worm_summary_duration_many_days	=	"{0} days"
share_worm_summary_duration_many_years	=	"{0} years"
share_worm_summary_duration_one_day	=	"1 day"
share_worm_summary_duration_one_year	=	"1 year"
share_worm_summary_wait_time_many_days	=	"{0} days after last modification"
share_worm_summary_wait_time_many_hours	=	"{0} hours after last modification"
share_worm_summary_wait_time_one_day	=	"1 day after last modification"
share_worm_summary_wait_time_one_hour	=	"1 hour after last modification"
share_worm_title	=	"WriteOnce"
source_file_size	=	"Size of source files:"
space_missing	=	"- missing"
space_missing_tip	=	"This volume is missing. Go to Storage Manager for details."
tier_share_delete_by_pkg	=	"Unable to delete this share folder because it is in a tiering plan. To delete this folder, click OK and go to the package."
tier_share_offline_tip	=	"This shared folder is in a tiering plan. Go to Package Center to repair or install the related package."
tier_shares_delete_by_pkg	=	"Unable to delete these share folders because they are in tiering plans. To delete the folders, click OK and go to the package."
tierfs_need_package	=	"Enable Synology Tiering in Package Center. Then, delete this shared folder."
tierfs_no_package_status	=	"Synology Tiering stopped"
tiering_share_delete_confirm	=	"The shared folder's tiered data in the cold tier, if connected"
tip_hide_nonprivileged_folder	=	"This setting is applied when users access shared folders via the following file services: SMB, AFP, and File Station."
tray_move_destination	=	"Destination: {0}"
umount_fail	=	"Failed to unmount the encrypted shared folder. Please check if it is currently being accessed."
unable_to_get_share_size	=	"This figure is not available due to the limitations of the file system. Go to File Station, right-click on the folder and select Properties to obtain this figure."
unite_permission_description	=	"Effective Permissions"
virtual_device_list	=	"Virtual drive list"
volume_encrypted_desc	=	"Encrypted"
warn_delete_homes_everyone_acl	=	"Deleting the ACL permissions of Everyone for the homes shared folder will result in users being unable to access their home folder."
warn_deny_rule_homes	=	"The "homes" shared folder contains all users' own "home" folders. If the "homes" shared folder permission is set to "No access", users will not be able to access their own "home" folder."
warn_deny_rule_homes_acl	=	"This ACL rule may result in the user being unable to access their home folder."
warn_enable_advanced_permission	=	"When advanced share permissions are enabled, the effective permissions of each user are determined by both advanced share permissions and Windows ACL permissions."
warn_sharename_too_long_mac	=	"The entered shared folder name is too long that Mac 9 users and Windows 98 users cannot access it. Are you sure you want to use the name?"
warn_sharename_too_long_w98	=	"The entered shared folder name is too long that Windows 98 users cannot access it. Are you sure you want to use the name? "
warning_directory_service_offline	=	"Certain functions have been disabled because the directory service is offline. Please check your Domain/LDAP settings."
worm_share_creation_name_limitation	=	"This name is reserved for a shared folder for package use and cannot be used to name a WriteOnce shared folder. Please use a different name."

[sharemigrate]
acl_exceed	=	"Number of permissions exceeds system limit"
button	=	"Convert to Windows ACL"
caution	=	"I understand that users with read-only permissions of a shared folder might be granted read/write access to files and subfolders according to the permissions of files and subfolders after conversion. This action is irreversible."
cifs_share	=	"Before converting to Windows ACL permissions, please unmount any remote mounted folders and virtual drives."
description_no	=	"Retains the permissions of subfolders and files. Recommended if you've already customized permissions for individual files and subfolders."
description_yes	=	"Applies the permissions of shared folders to subfolders and files. Recommended for most users."
fail	=	"Conversion failed."
go_migrate	=	"Another conversion task is currently running. We'll redirect you to progress page of the other task."
invalid_share	=	"The permissions of some shared folders cannot be converted to Windows ACL. Please see the details below."
migrated_share	=	"Previously converted"
migrating	=	"Converting..."
not_support	=	"File system does not support Windows ACL"
progress_headline	=	"Conversion progress"
recommand_no	=	"No, keep individual permissions"
recommand_yes	=	"Yes, apply the same permissions"
replace_all	=	"Apply shared folder permissions to subfolders and files?"
selected_share	=	"Selected shared folders"
title	=	"Windows ACL Conversion Wizard"
umount_enc	=	"Unmounted encryption shared folders"
unknown_error	=	"Unable to perform this operation, possibly because the network connection is unstable or the system is busy. Please try again later."
unsupport_service_share	=	"Does not support Windows ACL"
wait_migrate	=	"Another conversion task is currently running. Please wait and try again later."
welcome_desc	=	"This wizard converts the share permissions of the selected shared folders to Windows ACL, unlocking options to customize and fine-tune the permissions of individual folders and files. After conversion, you'll be able to customize permissions of folders and files in File Station and Windows File Explorer."
welcome_title	=	"Convert Share Permissions to Windows ACL"

[sharesnap]
snap_browse_msg	=	"To browse the snapshot, you need to enable "Make snapshot visible" option for this shared folder. Do you want to enable the option now?"
space_reclamation_warning	=	"Space reclamation may take some time after snapshots are deleted."

[sharewizard]
access_admin	=	"admin: read-write; all other users: read-only."
access_all	=	"Everyone: read-write."
access_descr	=	"Select users to access the shared folder:"
access_user	=	"Specific user"
checking_share	=	"Checking shared folder name..."
creating_share	=	"Creating shared folder..."
final_descr	=	"The shared folder <b>{0}</b> has been created."
finalstep_title	=	"Shared folder created"
long_descr	=	"Create a shared folder and assign access rights"
privfolder	=	"Accessible only by {0}"
select_user	=	"Select user..."
share_perm	=	"Shared folder access rights"
shareaccess_title	=	"Assign access rights"
shareinfo_descr	=	"Fill in the following fields:"
shareinfo_title	=	"Shared folder information"
short_descr	=	"Create a shared folder"
summary_title	=	"Confirm settings"
usernotset_msg	=	"Unselected"
welcome	=	"The wizard will guide you through the following settings:<p><ul><li>Shared folder information</li><li>Shared folder access rights</li></ul></p>"
welcome_title	=	"Welcome to Shared Folder Creation Wizard"
wizard_title	=	"Shared Folder Creation Wizard"

[sharing]
add_files	=	"Add Files"
bad_username	=	"Invalid characters used."
clean_badlinks	=	"Clear invalid links"
clean_confirm	=	"Are you sure you want to delete all invalid and expired shared links?"
customize_duration	=	"Customize Validity Period"
delete_confirm	=	"Are you sure you want to delete the selected shared link(s)?"
dsm_access_desc	=	"Get access using your _OSNAME_ account"
dsm_user_alert	=	"Please select at least one account."
enable_expire_at	=	"Set up stop time"
enable_expire_times	=	"Number of allowed access"
enable_start_at	=	"Set up start time"
enter_password	=	"Password"
error_entry_passwd	=	"Invalid password."
error_entry_user	=	"Invalid _OSNAME_ username(s)."
error_invalid_entry	=	"This shared link is not available."
exp_after	=	"Validity period"
expire_at_date	=	"Stop date"
expire_at_time	=	"Stop time"
expire_times	=	"Times"
facebook_desc	=	"Facebook"
file_request_title	=	"Open Link with Password"
full_instruction	=	"For file sharing, copy the links below or send them via {0} or {1}."
get_qrcode	=	"Get QR Code"
googleplus_desc	=	"Google+"
link	=	"Shared Link"
passwd_access_desc	=	"Enter the password to gain access"
protect_access	=	"Protected Access"
qrcode_links	=	"QR Code Link"
remaining_times	=	"Remaining access times"
restrict_sharing	=	"Enable secure sharing"
share_dsm_user	=	"Share with _OSNAME_ users"
share_public_user	=	"Share with others"
share_with_me	=	"Links Shared with Me"
sharing_all	=	"All Links"
sharing_link	=	"Shared link"
sharing_links	=	"Shared Links"
sharing_manager	=	"Shared Links Manager"
start_at_date	=	"Start date"
start_at_time	=	"Start time"
time_set_error	=	"{0} must be earlier than {1}"
upload_status	=	"Uploaded {0} files"

[sm_background_task]
desc_data_scrubbing	=	"Regularly running data scrubbing helps to ensure data consistency."
primary_title_run_on	=	"Target:"

[smart]
cache_management	=	"Cache Management"
rpm	=	"RPM"
smart_attention_required_hint_back_up	=	"Regularly back up your data to ensure data integrity. <a href="https://kb.synology.com/DSM/tutorial/What_is_SMART" target="_blank">Learn more about S.M.A.R.T.</a>"
smart_attention_required_hint_scrubbing	=	"Perform data scrubbing first and back up your data to ensure data integrity. <a href="https://kb.synology.com/DSM/tutorial/What_is_SMART" target="_blank">Learn more about S.M.A.R.T.</a>"
smart_attribute	=	"Attribute"
smart_before_error_tag	=	"Error"
smart_current	=	"Value"
smart_desc_extend_all	=	"Extended test on all disks"
smart_desc_extend_sel	=	"Extended test on selected drives"
smart_desc_quick_all	=	"Quick test on all disks"
smart_desc_quick_sel	=	"Quick test on selected drives"
smart_disk_damage	=	"Abnormal"
smart_disk_firmware	=	"Firmware version"
smart_disk_firmware_title	=	"Firmware Version"
smart_disk_serial	=	"Serial number"
smart_disk_serial_title	=	"Serial Number"
smart_error_attention	=	"S.M.A.R.T. errors have been detected on one or more HDDs/SSDs. We recommend replacing the failing drives with healthy ones."
smart_error_before	=	"(This disk has a failed test history.)"
smart_extend_test	=	"Extended Test"
smart_extend_test_log	=	"Last Extended Test result"
smart_id	=	"ID"
smart_latest_test_log	=	"Last test result"
smart_name	=	"S.M.A.R.T."
smart_not_support	=	"This disk doesn't support S.M.A.R.T."
smart_quick_test	=	"Quick Test"
smart_quick_test_log	=	"Last Quick Test result"
smart_quick_test_scheduler_notification	=	"The system has scheduled S.M.A.R.T. Quick Test for drives by default. If you want to change or delete the schedule, please go to <a style="font-size:12px;text-decoration:underline;" data-syno-app="SYNO.SDS.StorageManager.Instance" data-syno-fn="SYNO.SDS.StorageManager.Disk.Main" data-syno-tab="scheduler">the setup page</a>."
smart_raw	=	"Raw Data"
smart_schedule_conflict	=	"The drive is already scheduled for S.M.A.R.T. test at the specified time. Please select another time and try again."
smart_schedule_desc	=	"Schedule the S.M.A.R.T. test to examine the hard disk health."
smart_schedule_list	=	"Scheduled Tests"
smart_selftest_cmd_exec_failed	=	"Failed to execute S.M.A.R.T. command. Please make sure your device supports the S.M.A.R.T. test feature and try again later."
smart_smart_extend_test	=	"S.M.A.R.T. Extended Test"
smart_smart_quick_test	=	"S.M.A.R.T. Quick Test"
smart_status	=	"S.M.A.R.T. Status"
smart_status_abnormal	=	"Abnormal"
smart_status_abnormal_full_text	=	"S.M.A.R.T. status abnormal"
smart_status_aborted	=	"Aborted"
smart_status_attention_required	=	"Attention required"
smart_status_damage	=	"Attention required. Keep monitoring the status of your drive."
smart_status_extend_suggest	=	"Extended test recommended"
smart_status_interrupted	=	"Interrupted"
smart_status_is_ssd	=	"S.M.A.R.T. test is not supported by this solid-state drive (SSD)."
smart_status_test_fail	=	"Test Failed"
smart_status_test_fail_full_text	=	"S.M.A.R.T. test failed"
smart_status_unknow	=	"Failed to fetch the S.M.A.R.T. information"
smart_test_button_start	=	"Start"
smart_test_button_stop	=	"Stop"
smart_test_desc	=	"Examine and report the hard disk status to alert possible disk failures."
smart_test_disabled	=	"S.M.A.R.T. self-test logging is not supported by this drive"
smart_test_log_nodata	=	"No S.M.A.R.T. self-test logs"
smart_test_recommend	=	"Suggestion"
smart_test_remain	=	"Progress"
smart_test_result	=	"Test Result"
smart_test_result_sentence	=	"Test result"
smart_test_scheduler	=	"Test Scheduler"
smart_test_time	=	"{0} will take about {1} {2}. The exact processing time may vary under different system environment."
smart_threshold	=	"Threshold"
smart_toolbar_disk_info	=	"Drive Info"
smart_toolbar_smart_info	=	"S.M.A.R.T. Attribute"
smart_toolbar_smart_test	=	"S.M.A.R.T. Test"
smart_worst	=	"Worst"

[smartblock]
action_distrust	=	"Untrust"
action_trusted_unlock	=	"Unblock"
action_untrusted_unlock	=	"Cancel Protection"
been_locked_desc	=	"Account is temporarily locked due to too many failed login attempts."
been_locked_title	=	"Account Locked"
client_id	=	"Client ID"
client_trust_settings	=	"Trusted Client Settings"
created_time	=	"Created time"
current_client	=	"Current Client"
current_client_trusted	=	"Current client trusted"
enabled_desc	=	"Account will be locked after too many failed login attempts within a set time range."
enabled_title	=	"Account Protection Enabled"
fieldset_trust_title	=	"Trusted clients"
fieldset_untrust_title	=	"Untrusted clients"
manage_trust_locked_title	=	"Blocked Clients"
manage_trust_title	=	"Trusted Clients"
manage_untrust_title	=	"Protected Accounts"
smartblock_desc	=	"Enable this option to protect your accounts from attacks by untrusted clients."
smartblock_enable	=	"Enable Account Protection"
smartblock_minute	=	"Within (minutes)"
smartblock_trust_lock_desc	=	"Define a period of time after which the clients will be unblocked."
smartblock_trust_lock_minute	=	"Unblock (minutes later)"
smartblock_trust_manage	=	"Manage Trusted Clients"
smartblock_trust_rule_desc	=	"A trusted client will be blocked if it fails to sign in too many times within a predefined period of time."
smartblock_try	=	"Login attempts"
smartblock_untrust_lock_desc	=	"Account protection will be cancelled after a predefined period of time."
smartblock_untrust_lock_minute	=	"Cancel account protection (minutes later)"
smartblock_untrust_manage	=	"Manage Protected Accounts"
smartblock_untrust_rule_desc	=	"Account protection will be triggered if an untrusted client fails to sign in too many times within a predefined period of time."
trust_client	=	"By a trusted client"
trust_client_desc	=	"You can unlock the account by signing in via another trusted client."
trust_self	=	"Trust Current Client"
trust_self_desc	=	"Trust the current client despite the settings of account protection. Once a client successfully logged in, it will be always trusted."
trusted_locked_time	=	"Starting Time"
unlock_self	=	"Cancel Protection"
unlock_self_desc	=	"You cannot log in from an untrusted client if the account is protected."
untrust_client	=	"By an untrusted client"
untrust_client_desc	=	"Your account can only be unlocked by an administrator. Please contact your administrator for assistance."
untrusted_locked_time	=	"Starting Time"
user_agent	=	"User Agent String"
when_trust_client_title	=	"When an account is locked:"

[smsnotify]
SMS_alert_secondary_phone	=	"The secondary phone number you entered is incomplete."
api_id	=	"API ID"
api_key	=	"API key"
camera_attr_password	=	"Password"
camera_attr_user	=	"Username"
category	=	"Category"
confirm_delete_provider	=	"Are you sure you want to delete the selected SMS service provider?"
enter_nationcode	=	"Enter your geocode"
finalstep_title	=	"Finish"
header_edit_param	=	"Edit Parameter"
header_req_header	=	"Edit HTTP request header"
header_req_parameter	=	"Edit HTTP request body"
http_method	=	"HTTP Method"
invalid_url	=	"Invalid URL format."
msg_interval	=	"Minimum interval between messages (minutes)"
msg_interval_enable	=	"Enable SMS interval limit"
primary_phone	=	"Primary phone number"
provider_descript	=	"Provider description"
provider_edit	=	"Edit SMS service provider"
provider_name	=	"Provider name"
provider_name_repetition	=	"The provider name already exists. Please enter a different name."
provider_new	=	"Add SMS Service Provider"
provider_param	=	"URL parameter definition"
provider_param_descript	=	"Select the corresponding category for each parameter"
provider_url	=	"SMS URL"
request_parameter	=	"Parameter"
request_value	=	"Value"
secondary_phone	=	"Secondary phone number"
sender	=	"Sender"
sms_auth	=	"Authentication"
sms_error_bad_password	=	"Numbers and English letters only. Less than 24 characters."
sms_provider	=	"SMS service provider"
sms_test_success	=	"A SMS test message has been sent. If you do not receive a message, please make sure the settings are correct."
sms_username	=	"Username"
smsnotify_enable	=	"Enable SMS notifications"
smsnotify_enable_desc	=	"Enable SMS notification service to receive notification messages via SMS when status changes or errors occur to the system."
smsnotify_preserve_provider	=	"Unable to use [synosms] for provider name. [synosms] is preserved for system use."
smsnotify_setup	=	"Setup"
test_sms	=	"Send Test Message"
url_err_duplicated_type	=	"Each parameter category except "Other" can only be used once."
url_err_invalid_param	=	"Invalid URL parameters."
url_err_need_message_content	=	"Please set a parameter to "Message Content" and set its value to "hello world". For more information, please refer to Help."
url_err_need_recipient	=	"Please set a parameter to "Phone number"."
url_err_need_sep_char	=	"Please type "hello world" as the value of the message content. For more information, please refer to Help."
url_err_need_user_pass	=	"Please set both "Username" and "Password“."
url_err_too_few_param	=	"You must enter at least 4 URL parameters."
url_err_too_many_param	=	"You can only enter 10 parameters at most."
url_param_content	=	"Message content"
url_param_other	=	"Other"
url_param_phone	=	"Phone number"

[snapmgr]
advanced_keep_all	=	"Keep the original advanced settings of the selected targets"
advanced_setting	=	"Advanced"
app_desc	=	"Enable application-consistent snapshots"
app_title	=	"Snapshot Replication"
application	=	"Application"
byte_count_limit	=	"Maximum byte count: {0}. Current byte count: {1}."
c2_migrate_hard_check	=	"Snapshot Replication is currently using this shared folder. To convert this folder, please go to Snapshot Replication to delete snapshots and replication tasks, and go to Control Panel > Task Scheduler to delete snapshot schedules."
cal_worm_lock_desc	=	"Please adjust the Protected Period or the Replication Frenquency."
cal_worm_lock_need_adjust_freq	=	"If you want to keep the protected period at <b>{0} days</b>, the replication frequency can only be set to a maximum of <b>{1}</b>."
cal_worm_lock_need_adjust_freq_tip	=	"Set to Maximum {0} or you can adjust replication protected period"
cal_worm_lock_need_adjust_lock_day	=	"If you want to keep the protected period at <b>{0} days</b>, the replication frequency can only be set to a maximum of <b>{1}</b>."
cal_worm_lock_need_adjust_lock_day_tip	=	"Set to Maximum {0} days or you can adjust replication schedule frequency"
cal_worm_lock_not_support	=	"Unable to enable WORM protection, please wait for the WORM snapshot to expire and then try again."
cal_worm_lock_not_support_freq	=	"You cannot keep the replication frequency at <b>{0}</b>. Please set to <b>{1}</b> or lower."
cal_worm_lock_not_support_freq_tip	=	"Set to Maximum {0}"
cal_worm_lock_not_support_lock_day	=	"You cannot keep the protected period at <b>{0} days</b>. Please set to <B>{1}</b> days or shorter."
calc_no_snapshot	=	"There is no snapshot taken during this period. Please select a longer time range."
calc_share_calculating	=	"The system is calculating the size of another shared folder. Please wait until the current task is finished."
continue_for_other_targets	=	"Do you want to continue the operation for the other targets?"
drsite_not_support_worm_lock	=	"DRSite do not support this function due to machine limit or DSM version."
drsite_support_worm_lock_lun	=	"Protect drsite snapshots and the drsite LUN which these snapshots belong to from being deleted by any method, including manual deletion. Protected Period typically range from 7-14 days"
drsite_support_worm_lock_share	=	"Protect drsite snapshots and the drsite shared folder which these snapshots belong to from being deleted by any method, including manual deletion. Protected Period typically range from 7-14 days"
drsite_worm_lock_checkbox	=	"DRSite High Security Protection"
enable_retention_policy	=	"Enable retention policy"
encrypted_not_support_browse	=	"Snapshot visibility is not available for encrypted shared folders."
err_get_ret_policy	=	"Failed to retrieve retention settings."
err_get_sche	=	"Failed to retrieve schedule settings."
err_max_rtt_cfg	=	"You have reached maximum limit of {0} retained snapshots in total."
err_quota_is_not_enough	=	"Operation failed because of reaching the quota limit of this shared folder."
err_set_ret_policy	=	"Failed to configure retention settings."
err_set_sche	=	"Failed to configure schedule settings."
err_volume_free_space_lessthan_reserved	=	"The available space is less than 100MB in the volume, and may result in some errors. Please try to make more space available on the volume."
error_replica_promote	=	"The following shared folder(s) are used as the source of replication tasks. Please delete the corresponding replication task(s) in <b>Snapshot Replication</b>:"
following_targets_failed	=	"Operation failed in the following targets:"
gfs_days_description	=	"Keep the latest snapshot of the day for"
gfs_hours_description	=	"Keep the latest snapshot of the hour for"
gfs_months_description	=	"Keep the latest snapshot of the month for"
gfs_weeks_description	=	"Keep the latest snapshot of the week for"
gfs_years_description	=	"Keep the latest snapshot of the year for"
info_average	=	"Average"
keep_days_description	=	"Keep all snapshots for"
keep_versions_description	=	"Numbers of latest snapshots to keep"
limit_snapshot_schedule_tip	=	"To maintain optimal system performance, the snapshot frequency limit of this NAS is adjusted to once every hour."
local_not_support_worm_lock_lun	=	"Do not support this function due to your selected tasks include Alun or you select the testfailover LUN."
local_not_support_worm_lock_share	=	"Do not support this function due to you select the testfailover share."
local_support_worm_lock_lun	=	"Protect snapshots and the LUN which these snapshots belong to from being deleted by any method, including manual deletion. Protected Period typically range from 7-14 days"
local_support_worm_lock_share	=	"Protect snapshots and the shared folder which these snapshots belong to from being deleted by any method, including manual deletion. Protected Period typically range from 7-14 days"
local_worm_lock_checkbox	=	"High Security Protection"
next_time_msg	=	"{0} {1} later"
page_recovery	=	"Recovery"
page_replication	=	"Replication"
ret_adv	=	"Advanced retention policy"
ret_adv_at_least_one	=	"Please set at least one retention rule."
ret_all_desc	=	"Always retain snapshots"
ret_all_tip	=	"Stop taking snapshots upon reaching the limit"
ret_daily	=	"daily snapshots (One snapshot per day)"
ret_del_old	=	"Retain 256 latest snapshots"
ret_desc_lun	=	"A LUN can have up to a total of {0} snapshots in its snapshot and replication tasks."
ret_desc_share	=	"A share folder can have up to a total of {0} snapshots in its snapshot and replication tasks."
ret_desp	=	"Determine how to retain snapshots. Earlier snapshots will be deleted accordingly."
ret_hourly	=	"hourly snapshots (One snapshot per hour)"
ret_keep_all	=	"Keep the original retention policy of the selected targets"
ret_monthly	=	"monthly snapshots (One snapshot per month)"
ret_pol_desc	=	"Retain snapshots with the following rules. A snapshot can apply to multiple rules at a time. {0}Learn more{1}"
ret_set_rule	=	"Set Rules"
ret_setting_remind	=	"The current retention setting is "Always retain snapshots" and no new snapshots can be taken once the number of snapshots reaches system limit. Click "OK" to edit the retention setting or "Skip" to configure it next time."
ret_title	=	"Retention"
ret_trigger_after_snap	=	"While taking snapshots"
ret_weekly	=	"weekly snapshots (One snapshot per week)"
ret_yearly	=	"yearly snapshots (One snapshot per year)"
retained_latest_snapshots_desc	=	"The system will ensure a certain number of latest snapshots are kept before applying the retention rules above."
retention_hourly_tooltip	=	"Not applicable. Only one snapshot is taken per day."
retention_policy_description_sr	=	"Enable a retention policy to keep only the snapshots you want and free up storage. Without a retention policy, all snapshots will be saved in the system."
run_retention	=	"Execute retention policy"
run_retention_immed	=	"Once you click OK, the retention settings will take effect immediately."
sche_action	=	"Run Replication"
sche_appname	=	"Snapshot Replication"
sche_exec_day	=	"Select days"
sche_repeat_every	=	"Frequency"
sche_repeat_until	=	"Repeat until"
sche_start_at	=	"Starting at"
sched_more_option	=	"More Options"
sched_more_option_note	=	"Higher snapshot frequency may impact system performance. If you want the system to take snapshots more frequently than once an hour, please make sure that the system is not running I/O intensive services (e.g., file services, iSCSI, backup tasks, database)."
selected_targets_operation_deny	=	"The operation is not allowed for the following selected targets:"
set_schedule	=	"Set Schedule"
set_share_snap_format	=	"Use the time in the GMT +0 time zone to name the snapshots"
share_nfs_crossmnt_apply_multiple	=	"To browse snapshots in the [#snapshot] folders with the NFS protocol, you must allow users to access mounted subfolders in the NFS rules for the shared folders.<br><br>Do you want to enable the related settings for the following shared folders:"
share_nfs_crossmnt_apply_now_confirm	=	"To browse snapshots in the [#snapshot] folders with the NFS protocol, you must enable the cross-mount option in NFS rules first.<br><br>Do you want to enable the cross-mount option in NFS rules now?"
share_snapshot_replication	=	"Snapshot Replication"
shared_config_notice	=	"This option will be applied to local snapshots as well as replication tasks."
snap_browse_msg	=	"To browse the snapshot, you need to enable "Make snapshot visible" option for this shared folder. Do you want to enable the option now?"
snap_last_time_msg	=	"{0} {1} ago"
snap_list	=	"Snapshot List"
snap_restore_share_conf_err	=	"Failed to restore the settings of the shared folder. Please try again."
snap_ret_trigger_time	=	"Choose when to delete snapshots"
snap_ret_trigger_time_desc	=	"Deleting snapshots might affect performance. We suggest setting this to off-peak hours."
snap_system_preserved	=	"Preserved by the system."
space_reclamation_warning	=	"Space reclamation may take some time after snapshots are deleted."
space_reclamation_warning_sr	=	"Space reclamation may take some time after snapshots are deleted. You may set the space reclamation schedule {0}here{1} to process space reclamation during off-peak hours. This helps minimize the performance impact on the services."
status_sync_desc	=	"The replication task is running."
wizard_summary_app	=	"Application-consistent snapshots"
wizard_summary_worm_lock_day_desc	=	"Replicated snapshot cannot be deleted within {0} days (protected by WORM)"
wizard_summary_worm_lock_title	=	"Destination security lock policy"
wizard_target_headline	=	"Select data to replicate"
wizard_target_share_desc	=	"Select the shared folders to replicate."
worm_lock_col_header	=	"worm"
worm_lock_day_label	=	"Protection Period"
worm_lock_expire_lock_tip	=	"Enable (Cannot be deleted anyway in {0})"
worm_lock_expire_time_label	=	"Expired in {0}"
worm_lock_expire_time_tip	=	"Estimate expired time: {0}"

[snmp]
MIB_desc	=	"Visit <a class="link-font" target="_blank" href="http://www.synology.com/support/snmp_mib.php">Synology's website</a> to download the Synology MIB files."
MIB_download	=	"(Please refer to the <a class="link-font" target="_blank" href="http://www.synology.com/support/snmp_mib.php">Synology MIB Guide</a> for more information.)"
snmp_auth	=	"Enable SNMP authentication"
snmp_desc	=	"Enable SNMP to monitor the server with network management software."
snmp_desc_v1_v2c	=	"SNMPv1, SNMPv2c service"
snmp_desc_v1_v2c_warning	=	"SNMPv1 and SNMPv2c services are insecure. We recommend using SNMPv3 only."
snmp_desc_v3	=	"SNMPv3 service"
snmp_device_info	=	"SNMP Device Information"
snmp_enable	=	"Enable SNMP service"
snmp_privacy	=	"Enable SNMP privacy"
snmp_privacy_protocol	=	"Privacy Protocol"
snmp_protocol	=	"Protocol"
snmp_rocommunity	=	"Community"
snmp_rocommunity_warning	=	"Avoid using insecure default name such as "public" and "private"."
snmp_sysContact	=	"Contact"
snmp_sysLocation	=	"Device Location"
snmp_sysName	=	"Device Name"
snmp_title	=	"SNMP"
warnning_select_v1v2_or_v3	=	"Please select at least one service."

[sofs]
node_pool	=	"Node Pool"

[spectre_meltdown_mitigation]
confirm_reboot	=	"You must restart the _OSNAME_ for the changes to take effect. Do you want to restart now?"
description_for_LK3.10_model	=	"{0}Note:{1} Enabling this option will slightly impact system performance. Please refer to {2}Security Advisory{3} for more details regarding KPTI and Retpoline."
description_for_LK4.4_model	=	"{0}Note:{1} Enabling this option will impact system performance to a certain extent. Please refer to {2}Security Advisory{3} for more information."
enable	=	"Enable Kernel page-table isolation (KPTI and Retpoline) to mitigate a CVE security vulnerability"
enable_for_LK4.4_model	=	"Enable Spectre and Meltdown protection to mitigate the threat of speculative execution vulnerability"
title	=	"Kernel Page-Table Isolation"
title_for_LK4.4	=	"Spectre and Meltdown Protection"

[sso]
account_login	=	"Sign in to DSM"
app_id	=	"Application ID"
app_name	=	"Application Name"
app_secret	=	"Application secret"
auth_endpoint	=	"OAuth 2.0 Authorization Endpoint"
auto_registry	=	"Quick Registration"
azure_authorization_endpoint	=	"OAuth 2.0 Authorization Endpoint"
azure_client_id	=	"Application ID"
azure_client_secret	=	"Keys"
azure_sso_enable	=	"Enable Entra ID SSO service"
azure_sso_login	=	"Entra ID SSO Authentication"
azure_tenant_id	=	"Directory ID"
azure_token_endpoint	=	"OAuth 2.0 Token Endpoint"
cas_enable	=	"Enable CAS SSO Service"
cas_server_url	=	"Server URL"
cas_server_url_tooltip	=	"The URL of your CAS server."
cas_server_validate_url	=	"Server validate URL"
cas_server_validate_url_tooltip	=	"This URL is used by your _DISKSTATION_ to confirm the validity of a service ticket with your CAS server."
cas_service_id	=	"Service ID"
cas_service_id_tooltip	=	"The URL of this _DISKSTATION_. Your CAS server will redirect users to this location upon successful authentication."
client_id	=	"Application ID"
client_secret	=	"Application Secret"
deprecated_redirect_uri_alert	=	"webman/login.cgi is no longer supported. Please refer to {0}this article{1} for details."
enable	=	"Enable Synology SSO service"
err_connect_sso_failed	=	"Failed to connect to the SSO server."
err_registry_failed	=	"Failed to register this application."
error_cannot_verify_server	=	"Unable to obtain information about the SSO server. This could be the result of an invalid certificate of the SSO server, incorrect domain in the Well-known URL, or failed connection to the SSO server."
error_get_auth_url	=	"Unable to get the URL for SSO authentication."
error_is_quickconnect_url	=	"This field cannot be a QuickConnect or HTTP address."
ldap_domain_disabled	=	"Join the same domain as the Microsoft Entra ID SSO server."
local_ldap_domain_option	=	"Domain/LDAP/local"
login_page	=	"Login Settings"
login_page_desc	=	"Using SSO to log in by default, allowing users to use SSO services more quickly"
name	=	"Name"
note_install_synosso	=	"To allow login via SSO for local users, please install the SSO Server package first."
note_join_directory	=	"Please make sure that this _DISKSTATION_ and the SSO server have been joined to the same directory service."
oidc_enable	=	"Enable OpenID Connect SSO service"
optional	=	"Optional field"
password	=	"Password"
profile_azure	=	"Microsoft Entra ID"
profile_confirm	=	"Your SSO profile is not set yet. Do you want to set the SSO profile now?"
profile_oidc	=	"OIDC"
profile_websphere	=	"WebSphere"
redirect_uri	=	"Redirect URI"
redirect_uri_note	=	"The unique identifier of this _DISKSTATION_ where users are redirected after your identity provider (IdP) confirms SAML assertions. This is often referred to as the Redirect URI, Application ID, or Assertion Consumer Service URL (ACS URL)."
saml_certificate	=	"Certificate"
saml_certificate_note	=	"The public key certificate of your IdP. This will be used to verify your IdP's SAML assertions and responses."
saml_enable	=	"Enable SAML SSO service"
saml_entity_id	=	"IdP entity ID"
saml_entity_id_note	=	"The unique attribute used to recognize your IdP. This is often referred to as the IdP issuer, issuer, or identifier."
saml_idp_metadata	=	"IdP Metadata"
saml_import_idp_metadata_note	=	"Please upload a valid SAML metadata file."
saml_import_metadata	=	"Import Metadata"
saml_invalid_metadata_msg	=	"Invalid metadata format"
saml_response_signature_verification	=	"Response signature verification"
saml_response_signature_verification_note	=	"Types of response signatures this _DISKSTATION_ will accept when validating SAML responses sent from your IdP."
saml_sign_assertion	=	"Sign SAML assertion"
saml_sign_response	=	"Sign SAML response"
saml_sign_response_and_assertion	=	"Sign SAML response and assertion"
saml_sign_url	=	"IdP single sign-on URL"
saml_sign_url_note	=	"The IdP endpoint from which SAML responses are sent. This is often referred to as the Login URL, SSO URL, or SAML endpoint."
scope	=	"Authorization scope"
server	=	"SSO server URL"
server_admin	=	"Server administrator"
server_name	=	"SSO server"
services	=	"Services"
sp_entity_id	=	"SP entity ID"
sso_cas_settings	=	"CAS SSO Settings"
sso_client_desc	=	"With an SSO service, users only need to remember one set of credentials and do not need to sign in to different applications separately."
sso_default_login	=	"Select SSO by default on the login page"
sso_login	=	"SSO Authentication"
sso_oidc_settings	=	"OpenID Connect SSO Settings"
sso_saml_settings	=	"SAML SSO Settings"
sso_synology_settings	=	"Synology SSO Settings"
sso_title_oidc	=	"OpenID Connect SSO Service"
sso_title_synology	=	"Synology SSO Service"
tip_app_id	=	"Synology SSO Server will assign Application ID to added client applications. Please copy the Application ID from Synology SSO Server and paste it into this field."
tip_cant_change_setting	=	"This option is not configurable according to the current settings in SSO Server."
title	=	"SSO Client"
token_endpoint	=	"OAuth 2.0 Token Endpoint"
user_claim	=	"Username claim"
warn_insecure	=	"SSO Server is using the HTTP protocol. If HTTPS connection has been enabled on your _DISKSTATION_, the SSO feature will not be available."
warn_invalid_cert	=	"The SSO server to be connected to is using the HTTPS protocol. If the SSO server uses a self-signed certificate, users will be required to install the certificate before signing in. For more information, please refer to SSO Server Help."
websphere_client_id	=	"Client ID"
websphere_client_secret	=	"Keys"
websphere_oidc_host	=	"SSO Server URL"
websphere_oidc_provider	=	"SSO Provider"
websphere_sso_login	=	"WebSphere SSO Authentication"
well_known_configuration_url	=	"Well-known URL"

[status]
CPU_temperature	=	"Thermal status"
CPU_temperature_desc	=	"(Sensor is 15 mm away from the CPU.)"
btn_enable_service	=	"Enable service"
btn_select_if	=	"Select network interface"
built_in_gpu	=	"GPU (Built-in)"
built_in_gpu_slot	=	"GPU slot (Built-in)"
celsius	=	"°C"
cpu1_core	=	"CPU1 cores"
cpu2_core	=	"CPU2 cores"
cpu_clock_speed	=	"CPU clock rate"
cpu_cores	=	"CPU cores"
cpu_model_name	=	"CPU"
cpu_num	=	"CPU(s)"
fahrenheit	=	"°F"
gpu	=	"GPU"
gpu_clock_rate	=	"GPU clock rate"
gpu_compatibility_incompatible	=	"Incompatible"
gpu_compatibility_unknown	=	"Unknown"
gpu_incompatibility_reason	=	"This GPU is not compatible with _DISKSTATION_. Please check the <a href='https://sy.to/gpu_compatibility'>compatibility list</a> and choose a compatible GPU instead."
gpu_thermal_status	=	"GPU temperature status"
gpu_total_memory	=	"Total GPU memory"
header_item	=	"Item"
header_value	=	"Value"
network_interface	=	"Network"
no_device_detected	=	"No device detected"
operating_time	=	"Operating time"
pcie_slot	=	"PCIe slot"
ramsize	=	"Total physical memory"
sata_nodevice	=	"No eSATA device is connected."
sd_nodevice	=	"No SD card is connected."
status_addr	=	"MAC address"
status_day	=	"day(s)"
status_devinfo	=	"Device Information"
status_disk_model	=	"Drive Model"
status_disk_number	=	"Number of drives"
status_disk_size_unit	=	"GB"
status_disk_surplus_size	=	"Unused size"
status_disk_total_size	=	"Total size"
status_disk_usage	=	"Disk usage"
status_disk_used_size	=	"Used size"
status_dns	=	"DNS"
status_empty_config	=	"&lt;Not Configured&gt;"
status_err_load	=	"Failed to download."
status_gateway	=	"Default gateway"
status_gluster	=	"Cluster Volume"
status_hdd	=	"Drive"
status_hour	=	"hour(s)"
status_ipaddr	=	"IP address"
status_ipv6addr	=	"IPv6 address"
status_mask	=	"Subnet mask"
status_minute	=	"minute(s)"
status_name	=	"Server name"
status_need_reboot	=	"A reboot is required for the setting changes to take effect."
status_network	=	"Network"
status_no_space	=	"Available space is insufficient."
status_nodevice	=	"No external device is connected."
status_not_available	=	"Not available"
status_not_enabled	=	"(Not enabled)"
status_sata	=	"eSATA device"
status_sd	=	"SD card reader"
status_second	=	"second(s)"
status_time	=	"Time"
status_timezone	=	"Time zone"
status_tunnel	=	"Tunnel"
status_usb	=	"USB device"
status_version	=	"_OSNAME_ version"
status_wins	=	"WINS server"
sys_time	=	"System time"
sysinfo_desc	=	"View system information, storage status, and log."
sysinfo_overview_tab	=	"General"
sysinfo_storage_tab	=	"Storage"
sysinfo_title	=	"System Information"
system_health	=	"System Health"
system_thermal_status	=	"System temperature status"
temperature	=	"Temperature"
text_ip_range	=	"IP range"
uptime	=	"Uptime"
usb_nodevice	=	"No USB device is connected."
warn_interface_not_avail	=	"The selected network interface is not available now. Click (here) to select another one."

[storage_manager]
dashboard_disk_info_card_title	=	"Device"
dlg_health_report_passive_offline	=	"You will only receive drive health reports from the active server because the passive server is offline. Make sure the passive server is powered on if you want to receive reports from both servers."
exp_alert_action_cancel_switch	=	"Cancel"
exp_alert_connection_error	=	"Incorrect cable connection. Refer to your model's <a href="https://kb.synology.com/search?sources%5B%5D=hardware_installation_guide" target="_blank">product manual</a> for expansion unit deployment."
exp_alert_connection_not_best_practice	=	"For better stability and reliability, we recommend following your model's <a href="https://kb.synology.com/search?sources%5B%5D=hardware_installation_guide" target="_blank">product manual</a> for expansion unit deployment."
exp_alert_topology_mismatch_ha	=	"Expansion unit IDs differ between the active and passive servers. Shut down the cluster and follow your model's <a href="https://kb.synology.com/search?sources%5B%5D=hardware_installation_guide" target="_blank">product manual</a> for expansion unit deployment."
exp_alert_topology_mismatch_ha_with_connection_error	=	"Expansion unit IDs differ between the active and passive servers, and cable connections are incorrect. Shut down the cluster and follow your model's <a href="https://kb.synology.com/search?sources%5B%5D=hardware_installation_guide" target="_blank">product manual</a> for expansion unit deployment."
exp_alert_topology_mode_not_change_to_fanout	=	"Switch to <b>fan-out mode</b>: Shut down your system and adjust the expansion cables as described in your model's <a href="https://kb.synology.com/search?sources%5B%5D=hardware_installation_guide" target="_blank">product manual</a>. The new setting will be applied at the next startup."
exp_alert_topology_mode_not_change_to_multipath	=	"Switch to <b>multipath mode</b>: Shut down your system and adjust the expansion cables as described in your model's <a href="https://kb.synology.com/search?sources%5B%5D=hardware_installation_guide" target="_blank">product manual</a>. The new setting will be applied at the next startup."
exp_errortip_cable_misconnected	=	"Incorrect cable connection. Refer to your model's <a href="https://kb.synology.com/search?sources%5B%5D=hardware_installation_guide" target="_blank">product manual</a> for expansion unit deployment."
exp_errortip_disconnected	=	"No correct cable connection detected. Make sure the cables are properly connected."
exp_errortip_exceed_host_wide_port_limit	=	"The number of expansion units exceeds the limit for this port. Refer to your model's <a href="https://kb.synology.com/search?sources%5B%5D=hardware_installation_guide" target="_blank">product manual</a> for more information."
exp_errortip_exceed_mp_enclosure_max	=	"The number of expansion units exceeds the limit for this group. Refer to your model's <a href="https://kb.synology.com/search?sources%5B%5D=hardware_installation_guide" target="_blank">product manual</a> for more information."
exp_errortip_incompatible	=	"Incompatible expansion unit. Refer to the <a href="https://www.synology.com/compatibility?search_by=products" target="_blank">Synology Product Compatibility List</a> for expansion units compatible with your _DISKSTATION_."
field_max_len	=	"The maximum length for this field is {0}."
note_cache_hcl_issue_acceptable	=	"This SSD cache contains drives not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">compatibility list</a> for your _DISKSTATION_. To ensure optimal performance and stability, Synology recommends using tested and validated drives from the list."
note_cache_hcl_issue_acceptable_passive	=	"%PassiveHost% (passive server): This SSD cache contains drives not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">compatibility list</a> for your _DISKSTATION_. To ensure optimal performance and stability, Synology recommends using tested and validated drives from the list."
note_cache_hcl_issue_migrated	=	"This SSD cache contains drives migrated from another Synology system, and these drives are not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">compatibility list</a> for your _DISKSTATION_. Drives on the compatibility list are required to replace drives or expand this SSD cache."
note_cache_hcl_issue_migrated_passive	=	"%PassiveHost% (passive server): This SSD cache contains drives migrated from another Synology system, and these drives are not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">compatibility list</a> for your _DISKSTATION_. Drives on the compatibility list are required to replace drives or expand this SSD cache."
note_pool_and_cache_hcl_issue_acceptable	=	"This storage pool and SSD cache contain drives not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">compatibility list</a> for your _DISKSTATION_. To ensure optimal performance and stability, Synology recommends using tested and validated drives from the list."
note_pool_and_cache_hcl_issue_acceptable_passive	=	"%PassiveHost% (passive server): This storage pool and SSD cache contain drives not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">compatibility list</a> for your _DISKSTATION_. To ensure optimal performance and stability, Synology recommends using tested and validated drives from the list."
note_pool_and_cache_hcl_issue_migrated	=	"This storage pool and SSD cache contain drives migrated from another Synology system, and these drives are not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">compatibility list</a> for your _DISKSTATION_. Drives on the compatibility list are required to replace drives or expand this storage pool or SSD cache."
note_pool_and_cache_hcl_issue_migrated_passive	=	"%PassiveHost% (passive server): This storage pool and SSD cache contain drives migrated from another Synology system, and these drives are not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">compatibility list</a> for your _DISKSTATION_. Drives on the compatibility list are required to replace drives or expand this storage pool or SSD cache."
note_pool_hcl_issue_acceptable	=	"This storage pool contains drives not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">compatibility list</a> for your _DISKSTATION_. To ensure optimal performance and stability, Synology recommends using tested and validated drives from the list."
note_pool_hcl_issue_acceptable_passive	=	"%PassiveHost% (passive server): This storage pool contains drives not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">compatibility list</a> for your _DISKSTATION_. To ensure optimal performance and stability, Synology recommends using tested and validated drives from the list."
note_pool_hcl_issue_migrated	=	"This storage pool contains drives migrated from another Synology system, and these drives are not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">compatibility list</a> for your _DISKSTATION_. Drives on the compatibility list are required to replace drives or expand this storage pool."
note_pool_hcl_issue_migrated_passive	=	"%PassiveHost% (passive server): This storage pool contains drives migrated from another Synology system, and these drives are not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">compatibility list</a> for your _DISKSTATION_. Drives on the compatibility list are required to replace drives or expand this storage pool."
overview_exp_link_window_cable_field_title	=	"Make sure the following SAS cables are properly connected"
overview_exp_link_window_cable_field_title_ha	=	"Make sure the following SAS cables of {0} are properly connected"
overview_exp_link_window_cable_instruction	=	"{0} ({1}) is connected to {2} ({3})"
overview_exp_link_window_cable_invalid	=	"{0} ({1}) is incorrectly connected. Check the Hardware Installation Guide for details.{2}"
overview_exp_link_window_cable_invalid_expansion	=	"(Unsupported expansion unit)"
overview_exp_link_window_poweron_field_title	=	"Make sure the following expansion units are powered on"
overview_exp_link_window_poweron_field_title_ha	=	"Make sure the following expansion units of {0} are powered on"
overview_exp_link_window_sascard_field_desc	=	"Check the Hardware Installation Guide for a list of compatible SAS expansion cards. Before installing or removing the expansion cards, please shut down the system first."
overview_exp_link_window_sascard_field_desc_count	=	"Shut down the system before you remove the extra SAS expansion cards."
overview_exp_link_window_sascard_field_title	=	"Make sure the SAS expansion cards are compatible with {0}"
overview_exp_link_window_sascard_field_title_count	=	"Make sure the system has only one primary SAS port and one secondary SAS port"
overview_exp_link_window_sascard_field_title_count_ha	=	"Make sure {0} has only one primary SAS port and one secondary SAS port"
overview_exp_link_window_win_title	=	"Expansion Unit Connection Details"
overview_level_attention	=	"Warning"
overview_level_danger	=	"Critical"
overview_level_healthy	=	"Healthy"
overview_schedule_task_status_pause	=	"Paused"
overview_schedule_task_status_ready	=	"Ready"
overview_schedule_task_status_running	=	"Running"
overview_schedule_task_status_suspend	=	"Postponed"
overview_slot_name_tip_eunit_disconnect	=	"Disconnected"
overview_slot_name_tip_eunit_invalid	=	"Incorrectly connected"
overview_slot_name_tip_eunit_missing	=	"{0} ({1}) cannot be detected."
overview_sug_3rd_extdev_incompatible	=	"An incompatible external device has been detected. Replace it with a <a href="https://www.synology.com/compatibility" target="_blank">compatible expansion unit</a> to access your data."
overview_sug_detected_pool_abnormal_multiple	=	"Issues have occurred to Available Pool {0}. Please go to the <b>Storage</b> page and refer to the suggestions of the corresponding available pools."
overview_sug_detected_pool_abnormal_single	=	"Issues have occurred to Available Pool {0}. Please go to the <b>Storage</b> page and refer to the suggestion of the corresponding available pool."
overview_sug_disk_location_mismatch	=	"Some drives for Storage Pool {0} are placed in different slots on the active and passive servers. Check the Drive Information of the active server. Shut down the passive server and then relocate its drives to match up with the active server's drive positions."
overview_sug_eunit_incompatible	=	"An incompatible expansion unit ({0}) has been detected. Replace it with a <a href="https://www.synology.com/compatibility?search_by=category&category=expansion_units&p=1">compatible expansion unit</a> to access your data."
overview_sug_exp_connection	=	"The expansion unit is not connected properly. Please check the connection."
overview_sug_incorrect_expansion_connection	=	"Connection issues have occurred between {0} and the expansion units. Click <a class="link-font exp-status-detail" href="#">here</a> for details."
overview_sug_incorrect_expansion_connection_ha	=	"{0} (passive server): Connection issues have occurred between {0} and the expansion units. Click <a class="link-font exp-status-detail" href="#">here</a> for details."
overview_sug_invalid_sas_hba_card	=	"Compatibility issues have occurred between the expansion units and the SAS expansion cards. Click <a class="link-font exp-status-detail" href="#">here</a> for details."
overview_sug_invalid_sas_hba_card_ha	=	"Compatibility issues have occurred between the expansion units of {0} and the SAS expansion cards. Click <a class="link-font exp-status-detail" href="#">here</a> for details."
overview_sug_multipath_recovering	=	"Reconnecting the expansion units. Make sure the SAS expansion cables stay connected and the expansion units remain powered on."
overview_sug_multipath_recovering_fail	=	"Unable to connect to the expansion unit. Restart the system, and make sure the SAS expansion cables stay connected and the expansion units remain powered on during the process."
overview_sug_multipath_recovering_fail_ha	=	"{0} (passive server): Unable to connect to the expansion unit. Restart {0}, and make sure the SAS expansion cables stay connected and the expansion units remain powered on during the process."
overview_sug_multipath_recovering_ha	=	"{0} (passive server): Reconnecting the expansion units. Make sure the SAS expansion cables stay connected and the expansion units remain powered on."
overview_sug_multipath_removing_cable	=	"SAS expansion cable disconnection detected."
overview_sug_multipath_removing_cable_ha	=	"{0} (passive server): SAS expansion cable disconnection detected."
overview_sug_multipath_two_ha_topology_mismatch	=	"Expansion unit IDs differ between the active and passive servers. Go to the <a link-id="goto_topology_page" href="#">Expansion Topology</a> page for details."
overview_sug_multipath_two_incorrect_expansion_connection	=	"Expansion units are not properly connected. Go to the <a link-id="goto_topology_page" href="#">Expansion Topology</a> page for details."
overview_sug_multipath_two_incorrect_expansion_connection_ha	=	"{0}: Expansion units are not properly connected. Go to the <a link-id="goto_topology_page" href="#">Expansion Topology</a> page for details."
overview_sug_multipath_two_pool_issue_due_to_expansion	=	"Storage Pool {0} has encountered critical issues. This might be caused by connection issues of the expansion units. Go to the <a link-id="goto_topology_page" href="#">Expansion Topology</a> page for details."
overview_sug_multipath_two_pool_issue_due_to_expansion_ha	=	"{1}: Storage Pool {0} has encountered critical issues. This might be caused by connection issues of the expansion units. Go to the <a link-id="goto_topology_page" href="#">Expansion Topology</a> page for details."
overview_sug_passive_server_offline	=	"The passive server is offline. Go to <b>Synology High Availability</b> for more information."
overview_sug_pool_abnormal_multiple	=	"Issues have occurred to Storage Pool {0}. Please go to the <b>Storage</b> page and refer to the suggestions of the corresponding storage pools."
overview_sug_pool_abnormal_multiple_ha	=	"Issues have occurred in Storage Pool {0} on {1}. Go to the <span class="bold-font">Storage</span> page and refer to the <span class="bold-font">Suggestion</span> under the corresponding storage pools."
overview_sug_pool_abnormal_single	=	"Issues have occurred to Storage Pool {0}. Please go to the <b>Storage</b> page and refer to the suggestion of the corresponding storage pool."
overview_sug_pool_abnormal_single_ha	=	"Issues have occurred in Storage Pool {0} on {1}. Go to the <span class="bold-font">Storage</span> page and refer to the <span class="bold-font">Suggestion</span> under the corresponding storage pool."
overview_sug_pool_issue_due_to_expansion	=	"Storage Pool {0} has encountered critical issues, possibly due to connection issues between {1} and the expansion units. Click <a class="link-font exp-status-detail" href="#">here</a> for details."
overview_sug_pool_issue_due_to_expansion_ha	=	"{1} (passive server): Storage Pool {0} has encountered critical issues, possibly due to connection issues between {1} and the expansion units. Click <a class="link-font exp-status-detail" href="#">here</a> for details."
overview_sug_storage_multiple_detected_multiple	=	"Issues have occurred to Storage Pool {0} and Available Pool {1}. Please go to the <b>Storage</b> page and refer to the suggestions of the corresponding storage pools and available pools."
overview_sug_storage_multiple_detected_single	=	"Issues have occurred to Storage Pool {0} and Available Pool {1}. Please go to the <b>Storage</b> page and refer to the suggestions of the corresponding storage pools and available pool."
overview_sug_storage_single_detected_multiple	=	"Issues have occurred to Storage Pool {0} and Available Pool {1}. Please go to the <b>Storage</b> page and refer to the suggestions of the corresponding storage pool and available pools."
overview_sug_storage_single_detected_single	=	"Issues have occurred to Storage Pool {0} and Available Pool {1}. Please go to the <b>Storage</b> page and refer to the suggestions of the corresponding storage pool and available pool."
overview_sug_system_error	=	"Unable to repair the system partition. To resolve this issue, refer to <a href="https://kb.synology.com/DSM/tutorial/What_to_do_when_system_partition_failed" target="_blank">this article</a>."
overview_sug_system_parition_irremediable	=	"The system has detected an error in the file system of the system partition. Please go to Control Panel> Update & Restore> Configuration Backup to back up the system settings immediately.Please go to <a href="https://www.synology.com/zh-tw/knowledgebase/DSM/tutorial/Storage/system_partition_error" target="_blank">here</a> for more information."
overview_sug_system_repairing	=	"System is syncing data ({0}% completion). This process may include multiple system checks. It is estimated to complete in 10 minutes."
overview_sug_vdsm_volume_crash_multiple	=	"Issues have occurred to multiple volumes. Please contact your system administrator."
overview_sug_vdsm_volume_crash_single	=	"Issues have occurred to a volume. Please contact your system administrator."
overview_sug_vdsm_volume_not_found	=	"No volumes are found. Please contact your system administrator."
passive_check_not_sync_done	=	"Data have not finished syncing to the passive server. Try again after the sync is complete. You can check the sync progress in Synology High Availability."
passive_check_space_abnormal	=	"This storage pool is in abnormal status on the passive server. Repair the storage pool first."
passive_check_space_drive_size_not_enough	=	"Cannot perform this operation. Check this storage pool on the passive server. Make sure the drives in this storage pool are of the same size as the ones in the corresponding storage pool on the active server."
passive_repair_check_disk_crashed_multiple	=	"The following drives are in a crashed status on the passive server: {0}. Replace these drives and then try again."
passive_repair_check_disk_crashed_single	=	"The following drive is in a crashed status on the passive server: {0}. Replace this drive and then try again."
passive_repair_check_disk_unqualified_multiple	=	"Cannot perform this action because the corresponding drives on the passive server do not meet the requirements. Replace these drives and then try again. <a class="{0}" href="#">View drive requirements</a>"
passive_repair_check_disk_unqualified_single	=	"Cannot perform this action because the corresponding drive on the passive server does not meet the requirements. Replace this drive and then try again. <a class="{0}" href="#">View drive requirements</a>"
passive_repair_check_follow_active_sug_first	=	"First follow the suggestion regarding {0} (active server)."
passive_repair_check_follow_passive_sug_first	=	"First follow the suggestion regarding {0} (passive server)."
passive_repair_check_repair_active_cache_first	=	"First repair the SSD cache on the active server."
passive_repair_check_repair_active_first	=	"First repair the storage pool on the active server."
passive_repair_check_replace_passive_disk_first	=	"One or more drives on the passive server require your attention. Replace these drives first."
passive_repair_check_slot_empty_multiple	=	"There are no drives in the following slots on the passive server: {0}. Please try again after installing the drives."
passive_repair_check_slot_empty_single	=	"There is no drive in the following slot on the passive server: {0}. Please try again after installing the drive."
passive_repair_check_slot_occupied_multiple	=	"The following slots on the passive server are in use by hot spare drives or drives assigned to another storage pool or SSD cache: {0}. Please shut down the passive server and relocate its drives to match up with the active server. Then, start up the passive server and try to repair again."
passive_repair_check_slot_occupied_single	=	"The following slot on the passive server is in use by a hot spare drive or a drive assigned to another storage pool or SSD cache: {0}. Please shut down the passive server and relocate its drives to match up with the active server. Then, start up the passive server and try to repair again."
passive_repair_wizard_new_disks	=	"Available drive (passive server)"
passive_repair_wizard_note_passive_not_support_fast_repair	=	"Storage pools on the passive server do not support Fast Repair."
passive_repair_wizard_title	=	"Repair (Passive Server)"
pool_btn_action_blocked_ha_passive_offline	=	"The system cannot perform this operation while the passive server is offline."
quick_start_panel_btn_text	=	"Create Now"
quick_start_panel_desc	=	"Create a storage pool and volume to start installing packages and storing files on your _DISKSTATION_."
quick_start_panel_title	=	"Create Storage Pool and Volume"
sm_module_list_opt_topology	=	"Expansion Topology"
ssd_trim_set_schedule_title	=	"Set Schedule"
storage_tbar_global_setting_btn	=	"Global Settings"
system_repair_btn_title	=	"Repair System Partition"
task_time_remain	=	"Time left"
topology_dlg_confirm_content	=	"To avoid unexpected errors, shut down your system before adjusting the expansion cables as described in your model's <a href="https://kb.synology.com/search?sources%5B%5D=hardware_installation_guide" target="_blank">product manual</a>. The new setting will be applied at the next startup. Are you sure you want to shut down the system now?"
topology_dlg_confirm_note	=	"<span class="syno-ux-note">Note:</span> For better reliability and redundancy, it is highly recommended to use the multipath mode for the expansion."
topology_dlg_power_off_btn	=	"Shut Down"
topology_dlg_switch_to_fanout_title	=	"Switch to Fan-Out Mode"
topology_dlg_switch_to_multipath_title	=	"Switch to Multipath Mode"
topology_fanout_mode	=	"Fan-Out Mode"
topology_legend_host_port_group	=	"Group {0}"
topology_legend_primary_port	=	"Primary Port"
topology_legend_secondary_port	=	"Secondary Port"
topology_menu_switch_to_fanout	=	"Switch to fan-out mode"
topology_menu_switch_to_multipath	=	"Switch to multipath mode"
topology_multipath_mode	=	"Multipath Mode"
topology_page_title	=	"Expansion Topology"
topology_sha_passive_not_avail_desc	=	"The passive server is offline. Go to <a class="sm-show-pointer-cursor">Synology High Availability</a> for details."
wizard_input_placeholder_volume_size	=	"Enter a value"

[storage_pool]
all_storage_pool	=	"All storage pools"
attention	=	"Warning"
auto_repair_confirm_desc	=	"Once Auto Repair is enabled, the newly installed drives will automatically replace the defective drives. All the data on the newly installed drive will be erased. Are you sure you want to continue?<br><span class="teal-status">Note:</span> When a storage pool is protected by hot spare drives, the system will use these drives in priority to repair a degraded storage pool."
auto_repair_desc	=	"This feature will repair the degraded storage pool automatically once the drives with issues have been removed from the drive slots and replaced with new drives."
auto_repair_enable	=	"Enable Auto Repair"
auto_repair_enable_data_check	=	"Stop repairing the storage pool when data are detected on the newly-installed drive"
auto_repair_running	=	"Auto repairing"
auto_repair_title	=	"Auto Repair"
bad_sectors	=	"Bad Sectors"
change_raid_type	=	"Change to"
change_raid_type_action	=	"Change {0} to {1}"
change_raid_type_desc	=	"You can change the RAID type of a storage pool without losing the existing data. Please select the RAID type that you want to change to."
check_synology_compatible_list	=	"Please refer to <a href="https://www.synology.com/compatibility" target="_blank">Synology Products Compatibility List</a> to find the compatible drives for your _DISKSTATION_."
configure_raid_group_title	=	"Configure drives"
confirm_close_first_time_wizard_desc	=	"You will not be able to save files or install packages if you don't finish the storage creation process. Are you sure you want to end the storage creation process?"
confirm_close_first_time_wizard_title	=	"End the creation process"
create	=	"Create"
create_configure_desc	=	"RAID is a data storage virtualization technology that aggregates multiple drives into a storage pool. Different RAID types provide different levels of performance, storage capacity, and reliability."
create_hint_m2_not_support_hotplug	=	"M.2 SSDs do not support hot plugging. Make sure the system is shut down before installing or removing M.2 SSDs from _DISKSTATION_. You may need to shut down the system whenever a storage pool action involves adding, removing, or replacing drives."
create_new_storage_pool	=	"Create a new storage pool"
create_pool	=	"Create Storage Pool"
create_pool_welcome_desc	=	"Before you can start storing data on your _DISKSTATION_, please create at least one storage pool and one volume first. Storage pool is a single storage unit combined by multiple drives, and volume is created on storage pool and is where your data are stored. Once you have installed drives in your _DISKSTATION_, you can start creating storage pools and volumes. This wizard will guide you through the process of storage pool creation."
create_pool_welcome_title	=	"Start to create a storage pool"
create_space_desc	=	"No storage pools. Before you can start storing your data on your _DISKSTATION_, please create at least one storage pool first and then create a volume."
create_space_title	=	"Create Now"
create_welcome_desc	=	"Before data can be stored on your _DISKSTATION_, please create at least one volume and storage pool. A storage pool is created through the aggregation of one or multiple drives, and a volume is created on a storage pool and is where all your data are stored. Follow the wizard to start creating a storage pool and volume."
create_welcome_title	=	"Start to create storage pools and volumes"
create_wizard_num_disks_in_raid	=	"Total number of drives used"
create_wizard_num_disks_in_raid_half	=	"N / 2 (N euqals to the total number of drives used)"
create_wizard_num_disks_in_raid_minus_one	=	"N - 1 (N equals to the total number of drives used)"
create_wizard_pool_cfg_disk_not_enough	=	"Insufficient number of {0} to create {1}."
create_wizard_pool_cfg_ssd_only_raid_fone	=	"Only SSDs can be used to create RAID F1."
current_drive_not_enough	=	"The number of drives currently available in your _DISKSTATION_ is insufficient for changing the RAID type to {0}. Before you can proceed, please insert at least {1} drive that matches the following criteria."
current_drive_not_enough_add_mirror	=	"The number of drives currently available in your _DISKSTATION_ is insufficient for adding a mirror drive. Before you can proceed, please insert at least {1} drive that matches the following criteria."
current_drives_not_enough	=	"The number of drives currently available in your _DISKSTATION_ is insufficient for changing the RAID type to {0}. Before you can proceed, please insert at least {1} drives that match the following criteria."
current_raid_type	=	"Current RAID type"
disk_selected	=	"Please note the following regarding the selected drive"
disks_selected	=	"Please note the following regarding the selected drives"
drag_disk_desc	=	"Please drag one or more available drives to the storage pool on the right."
drive_check_desc	=	"Performing a drive check can automatically reconfigure a drive, thereby reducing the risk of data access errors."
ebox_internal_mix_warning	=	"The storage pool will be created on the drives of this _DISKSTATION_ and on the drives of the expansion unit. The storage pool will crash if the expansion unit is disconnected from _DISKSTATION_."
ebox_power_button_disabled	=	"If a storage pool is created on an expansion unit, the expansion unit cannot be powered off via its physical power button."
enable_auto_replacement_checkbox	=	"Enable Auto Replacement when the drive status is "Critical""
estimate_capacity	=	"Estimated capacity"
estimate_capacity_tip	=	"Learn more about the <a class="link-font" href="https://kb.synology.com/DSM/help/DSM/StorageManager/storage_pool_what_is_raid" target="_blank">storage capacity</a> each RAID type offers."
fast_repair	=	"Fast Repair"
fast_repair_check_empty_raid	=	"Fast Repair won't be performed because there is no volume detected or your storage pool data is unrecognizable."
fast_repair_check_high_usage	=	"Unable to perform Fast Repair because the storage pool usage has exceeded {0}%."
fast_repair_check_internal_error	=	"Fast Repair won't be performed because of internal error, but it will not impact your data integrity."
fast_repair_check_no_supported_space	=	"Fast Repair won't be performed because storage pool only has unsupported spaces, for example, block-level LUNs, SSD cache and Time Backup spaces."
fast_repair_check_volume_error	=	"Fast Repair won't be performed because volume {0} has crashed."
fast_repair_enable	=	"Enable Fast Repair"
fast_repair_enable_auto_scrubbing	=	"Perform data scrubbing after Fast Repair finishes for storage pool optimization (recommended)"
fast_repair_passive_not_support_note	=	"Storage pools on the passive server do not support Fast Repair."
fast_repair_suggest_scrubbing	=	"If your RAID type is RAID 5, RAID 6, or RAID F1 and storage pool optimization was not performed after Fast Repair, it's suggested to manually run Data Scrubbing."
fast_repair_tip	=	"Compared with Regular Repair, Fast Repair shortens the time needed for a degraded storage pool to recover to a healthy status and skips unused spaces in a storage pool to accelerate the repair speed."
fast_repair_title	=	"Fast Repair"
first_time_wizard_no_available_drive	=	"No available drives to create a storage pool. Please install drives in your _DISKSTATION_ first and then try again."
ha_remote_not_valid	=	"Settings cannot be applied because the passive server is either offline or not detected."
hcl_migrated_disk_removing_list_ha	=	"Active server: {0}"
hcl_migrated_disk_removing_list_ha_passive	=	"Passive server: {0}"
max_drive_per_raid_group	=	"Maximum number of drives per RAID array"
migrate_select_drives_desc	=	"Add at least {1} drives to the storage pool to change the RAID type to {0}:"
multiple_vol_support	=	"Multiple-volume support"
new_drive_note	=	"All the data on the newly added drives will be erased."
no_free_disk	=	"No drives are available for storage pool creation."
normal_repair	=	"Regular Repair"
num_available_drives	=	"Available number of drives"
num_drives	=	"Number of drives"
num_min_drives	=	"Minimum number of drives"
num_tolerable_drive_failure	=	"Drive fault tolerance"
overview_pool_err_desc	=	"One or more storage pools have potentially crashed. We recommend rescuing your data by copying the files or running a backup task."
passive_pool_acceptable_disk_suggestion	=	"%PassiveHost% (passive server): This storage pool contains drives that are not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">compatibility list</a>. You can identify them on the <span class="bold-font">HDD/SSD</span> page. When adding or replacing drives, consider using compatible drives. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
passive_pool_crashed_can_assemble_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): Storage Pool {0} has crashed.</span> However, the number of drives installed is sufficient. Click <a class="link-font passive-reassemble-link" {1} href="#">Online Assemble</a> to assemble the storage pool."
passive_pool_crashed_can_reboot_assemble_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): Storage Pool {0} has crashed.</span> However, the number of drives installed is sufficient. Click <a class="link-font passive-repair-link" {1} href="#">repair</a> to repair the storage pool."
passive_pool_crashed_recreate_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): Storage Pool {0} has crashed or is missing drives.</span> Check the drive connection status and make sure this storage pool has all its drives installed in the corresponding slots on the passive server. Then, click <a class="link-font passive-repair-link" {1} href="#">repair</a> to repair the storage pool."
passive_pool_degraded_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): Storage Pool {0} has degraded.</span> Make sure this storage pool has all its drives installed in the corresponding slots on the passive server. The drives should be in healthy status. Then, click <a class="link-font passive-repair-link" {1} href="#">repair</a> to repair the storage pool. You can go to <span class="bold-font">HDD/SSD</span> to check the status of the drives on the passive server."
passive_pool_disk_need_dsmupdate_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): Storage Pool {0} contains one or more drives that require you to update _OSNAME_.</span> To continue using these drives, go to <span class="sm-font-bold">Control Panel</span> > <span class="sm-font-bold">Update & Restore</span> > <span class="sm-font-bold">_OSNAME_ Update</span> to update _OSNAME_. For more information, check the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">Compatibility List</a>."
passive_pool_disk_need_fwupgrade_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): Storage Pool {0} contains one or more drives that require a firmware update.</span> To continue using these drives, go to <span class="sm-font-bold">HDD/SSD</span> > <span class="sm-font-bold">Action</span> > <span class="sm-font-bold">Firmware Update</span> to update the drive firmware."
passive_pool_incompatible_disk_and_degrade_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): Storage Pool {0} has degraded. It also has one or more drives that are not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">Compatibility List</a>.</span> Make sure the number and placement of the drives in this storage pool are identical to the active server. These drives should be in a healthy status. Then, click <a class="link-font passive-repair-link" {1} href="#">repair</a> to repair the storage pool. Wait for the repair to complete and then replace the the incompatible or unrecognized drives."
passive_pool_incompatible_disk_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): Storage Pool {0} has one or more drives that are not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">Compatibility List</a>.</span> These drives cannot be used and must be replaced immediately. Go to <span class="bold-font">HDD/SSD</span> to identify the incompatible or unrecognized drives. After replacing them with compatible drives, return to this page and <a class="link-font passive-repair-link" {1} href="#">repair</a> the storage pool to solve the issue."
passive_pool_missing_can_assemble_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): Storage Pool {0} had one or more missing drives, but a sufficient number of drives are now detected.</span> To assemble the storage pool, click <a class="link-font passive-reassemble-link" {1} href="#">Online Assemble</a>."
passive_pool_missing_can_reboot_assemble_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): Storage Pool {0} had one or more missing drives, but a sufficient number of drives are now detected.</span> To repair the storage pool, click <a class="link-font passive-repair-link" {1} href="#">repair</a>."
passive_pool_missing_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): Storage Pool {0} is missing.</span> Check the drive connection status. Make sure this storage pool has all its drives installed in the corresponding drive slots on the passive server. Then, click <a class="link-font passive-repair-link" {1} href="#">repair</a> to repair the storage pool."
passive_pool_not_exist_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): Storage Pool {0} is missing.</span> There might have been a sync issue between the servers. Click <a class="link-font passive-repair-link" {1} href="#">repair</a> to repair the storage pool."
passive_pool_permitted_disk_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): Storage Pool {0} contains one or more unverified drives.</span> Using unverified drives may affect system reliability and stability. You can check <span class="bold-font">HDD/SSD</span> to identify the unverified drives on the passive server. After replacing them with compatible drives, click <a class="link-font passive-repair-link" {1} href="#">repair</a> to repair the storage pool. <a href="https://kb.synology.com/DSM/tutorial/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
passive_pool_unhealthy_repair_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): Storage Pool {0} contains one or more drives in warning status.</span> However, the storage pool is still working and data are still accessible. Go to the <span class="bold-font">HDD/SSD</span> page to identify the defective drives on the passive server. Deactivate (<span class="bold-font">Action</span> > <span class="bold-font">Deactivate Drive</span>) and replace the drives one at a time. After each replacement, click <a class="link-font passive-repair-link" {1} href="#">repair</a> to repair the storage pool."
passive_pool_unrecognized_disk_and_degrade_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): Storage Pool {0} has degraded. It also contains one or more unrecognized drives.</span> Make sure the number and placement of the drives in this storage pool are identical to the active server. These drives should be in a healthy status. Then, click <a class="link-font passive-repair-link" {1} href="#">repair</a> to repair the storage pool. Wait for the repair to complete and then replace the unrecognized drives. <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">Learn more</a>"
passive_pool_unrecognized_disk_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): Storage Pool {0} contains one or more unrecognized drives.</span> Unrecognized drives cannot be used and must be replaced. Go to the <span class="bold-font">HDD/SSD</span> page to identify the unrecognized drives on the passive server. After replacing them with compatible drives, click <a class="link-font passive-repair-link" {1} href="#">repair</a> to repair the storage pool. <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">Learn more</a>"
passive_pool_unverified_disk_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): Storage Pool {0} contains one or more unverified drives.</span> Using unverified drives may affect system reliability and stability. You can check <span class="bold-font">HDD/SSD</span> to identify the unverified drives on the passive server. After replacing them with compatible drives, click <a class="link-font passive-repair-link" {1} href="#">repair</a> to repair the storage pool. <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">Learn more</a>"
pause_schedule_desc	=	"The schedule for all storage pools will be suspended. Are you sure you want to pause?"
pause_schedule_title	=	"Pause the schedule for all storage pools"
please_insert_more_drive	=	"Install more drives"
please_rm_pkg_before_eject_multiple	=	"Before you can safely eject {0}, you need to uninstall the following packages stored on the storage pool:"
please_rm_pkg_before_eject_single	=	"Before you can safely eject {0}, you need to uninstall the following package stored on the storage pool:"
pool_acceptable_disk_suggestion	=	"This storage pool contains drives that are not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">compatibility list</a>. You can identify them on the <span class="bold-font">HDD/SSD</span> page. When adding or replacing drives, consider using compatible drives. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
pool_action_assemble_now	=	"Online Assemble"
pool_add_disk_need_more_disks	=	"Insufficient number of available drives to add to this storage pool. Please insert at least {0} more drives matching the following criteria:"
pool_add_disk_need_one_more_disk	=	"Insufficient number of available drives to add to this storage pool. Please insert at least {0} more drive that matches the following criteria:"
pool_assemble_choose_controller_desc	=	"Storage pool will be assembled on the selected controller."
pool_assemble_choose_controller_title	=	"Choose controller"
pool_assemble_common_desc	=	"Online Assemble can assemble a storage pool where some of its drives were once missing, restoring the storage pool back to available status without the hassle of restarting the system. Detailed information about the storage pool to be assembled is shown below:"
pool_assemble_err_assembled	=	"Pool is assembled."
pool_assemble_err_assembling	=	"Pool is assembling..."
pool_assemble_fail_note	=	"Failed to assemble Available Pool {0}."
pool_assemble_insufficient_cache_disk_count	=	"Number of required SSD cache drives"
pool_assemble_insufficient_disk_count	=	"Number of required drives"
pool_cache_drives	=	"Cache drives"
pool_cmp_hcl_compat_check_fail_passive_data_scrubbing	=	"On the passive server, Storage Pool {0} has one or more drives that are not on the Synology Products Compatibility List. To run data scrubbing, make sure all drives in the storage pool are compatible."
pool_convert_need_more_disks	=	"Insufficient number of available drives for converting a single-volume storage pool to a multiple-volume storage pool. Please insert at least {0} more drives matching the following criteria:"
pool_convert_need_one_more_disk	=	"Insufficient number of available drives for converting a single-volume storage pool to a multiple-volume storage pool. Please insert at least {0} more drive that matches the following criteria:"
pool_crashed_call_support	=	"<span class="red-status">This storage pool has crashed.</span> To rescue your data, please sign in to your <a href="https://account.synology.com/support/" target="blank">Synology Account</a> to submit a technical support ticket. If you no longer need this storage pool, please click <div class="sm-pool-sug-more-btn-img"></div> > <b>Remove</b> to remove it and then create a new one."
pool_crashed_drive_back_partial_reboot_suggestion	=	"<span class="red-status">Undetected drive in this storage pool.</span> Check the drive connection status or refer to <span class="bold-font">Required Drive Info</span> to find out which drive is required and insert it back in your _DISKSTATION_. Restart the system to assemble the storage pool."
pool_crashed_drive_back_partial_reboot_suggestion_multiple	=	"<span class="red-status">Undetected drives in this storage pool.</span> Check the drive connection status or refer to <span class="bold-font">Required Drive Info</span> to find out which drives are required and insert them back in your _DISKSTATION_. Restart the system to assemble the storage pool."
pool_crashed_drive_back_partial_suggestion	=	"<span class="red-status">Undetected drive in this storage pool.</span> Please check the drive connection status or refer to <b>Required Drive Info</b> below to find out which drive is missing and install it back in your _DISKSTATION_. Also, you can simply click <a class="link-font re-assemble-link" href="#">Online Assemble</a> to assemble the storage pool."
pool_crashed_drive_back_partial_suggestion_multiple	=	"<span class="red-status">Undetected drives in this storage pool.</span> Please check the drive connection status or refer to <b>Required Drive Info</b> below to find out which drives are missing and install them back in your _DISKSTATION_. Also, you can simply click <a class="link-font re-assemble-link" href="#">Online Assemble</a> to assemble the storage pool."
pool_crashed_drive_back_reboot_suggestion	=	"<span class="red-status">This storage pool has crashed.</span> However, the number of drives installed is sufficient. Restart the system to assemble the storage pool and access the data on the drives."
pool_crashed_drive_back_reboot_suggestion_single	=	"<span class="red-status">This storage pool has crashed.</span> However, the number of drives installed is sufficient. Restart the system to assemble the storage pool and access the data on the drive."
pool_crashed_drive_back_suggestion	=	"<span class="red-status">This storage pool has crashed.</span> However, a sufficient number of drives have been detected. Please click <a class="link-font re-assemble-link" href="#">Online Assemble</a> to assemble the storage pool and then access the data on the drives."
pool_crashed_drive_back_suggestion_single	=	"<span class="red-status">This storage pool has crashed.</span> However, a sufficient number of drives have been detected. Please click <a class="link-font re-assemble-link" href="#">Online Assemble</a> to assemble the storage pool and then access the data on the drive."
pool_crashed_drive_not_enough_suggestion	=	"<span class="red-status">Insufficient number of drives in this storage pool.</span> Please check the drive connection status or refer to <b>Required Drive Info</b> below to find out which drive is required and insert it back in your _DISKSTATION_. If you no longer need this storage pool, please click <div class="sm-pool-sug-more-btn-img"></div> > <b>Remove</b> to remove it and then create a new one."
pool_crashed_drive_not_enough_suggestion_multiple	=	"<span class="red-status">Insufficient number of drives in this storage pool.</span> Please check the drive connection status or refer to <b>Required Drive Info</b> below to find out which drives are required and insert them back in your _DISKSTATION_. If you no longer need this storage pool, please click <div class="sm-pool-sug-more-btn-img"></div> > <b>Remove</b> to remove it and then create a new one."
pool_deactivate_button	=	"Safe Eject"
pool_deactivate_summary_desc	=	"All the storage pool's services will stop, and all its data will become inaccessible during the safe ejection process. <a href="https://kb.synology.com/DSM/help/DSM/StorageManager/storage_pool_safe_eject" target="_blank">Learn more</a>"
pool_degraded_drive_cannot_plug_out_suggestion	=	"<span class="red-status">This storage pool has degraded.</span> It contains multiple failed drives, of which some are still in use; therefore, removing these drives may cause the storage pool to crash. If you wish to replace a drive, please go to the HDD/SSD page to first deactivate it before removing it from _DISKSTATION_. To repair the storage pool, please check if your _DISKSTATION_ contains unused drives, and insert a new drive if there is no unused drive. Afterward, follow the instructions in <a href="https://www.synology.com/knowledgebase/DSM/help/DSM/StorageManager/storage_pool_repair" target="_blank">this article</a> and click <div class="sm-pool-sug-more-btn-img"></div> > <b>Repair</b> or simply click <a class="link-font pool-repair-link" href="#">repair now</a> to repair the storage pool. Refer to <b>Drive Info</b> below to check the drive health status."
pool_degraded_volume_no_mount_suggestion	=	"由於儲存空間 {0} 發生異常且儲存集區降級，請聯絡 <a href="https://account.synology.com" target="_blank">Synology 線上支援中心</a>進行資料救援；若不需要，請將儲存集區刪除後再重建"
pool_delete_feasibility_check	=	"Removing the storage pool will disable the usage history function in Resource Monitor and permanently erase all usage history data. Please keep at least one storage pool and volume to prevent data loss."
pool_delete_summary_desc	=	"The required time for storage pool removal depends on the drive size and volume type. Do not shut down the system before the removal process is complete."
pool_detail_cache_drive_cache_num	=	"Cache Number"
pool_detail_cache_drive_title	=	"Cache Drive Info"
pool_detail_disk_info_disk_num	=	"Drive Number"
pool_detail_disk_info_disk_type	=	"Type"
pool_detail_disk_info_title	=	"Drive Info"
pool_detected_name	=	"Available Pool"
pool_detected_notification	=	"Detected that [Available Pool {0}] can be assembled. Please go to <a style="font-size:12px;text-decoration:underline;" data-syno-app="SYNO.SDS.StorageManager.Instance" data-syno-fn="SYNO.SDS.StorageManager.Pool.Main" data-syno-tab="storage_pool">Storage Manager</a> for more information."
pool_disk_loc_mismatch	=	"<span class="red-status">Some drives for this storage pool are placed in different slots on the active and passive servers.</span> Go to the Overview page and check the Drive Information of the active server. Shut down the passive server and then relocate its drives to match up with the active server's drive positions."
pool_disk_message_align_4kn	=	"4K native"
pool_disk_message_align_not_4kn	=	"not 4K native"
pool_disk_need_dsmupdate_suggestion	=	"<span class="orange-status">This storage pool contains one or more drives that require you to update _OSNAME_.</span> To continue using these drives, go to <span class="sm-font-bold">Control Panel</span> > <span class="sm-font-bold">Update & Restore</span> > <span class="sm-font-bold">_OSNAME_ Update</span> to update _OSNAME_. For more information, check the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">Compatibility List</a>."
pool_disk_need_fwupgrade_suggestion	=	"<span class="orange-status">This storage pool contains one or more drives that require a firmware update.</span> To continue using these drives, go to <span class="sm-font-bold">HDD/SSD</span> > <span class="sm-font-bold">Action</span> > <span class="sm-font-bold">Firmware Update</span> to update the drive firmware."
pool_disk_warning_1bay_suggestion	=	"<span class="orange-status">Drive issues have occurred in this storage pool.</span> Please follow the instructions in <a href="https://www.synology.com/knowledgebase/DSM/help/DSM/Tutorial/backup_backup" target="blank">this article</a> to back up your data immediately, and then follow the instructions in <a href="https://www.synology.com/knowledgebase/DSM/tutorial/General_Setup/How_to_reset_my_Synology_NAS#t3" target="blank">this article</a> to re-install your _OSNAME_ and restore your data."
pool_estimate_state	=	"Estimated status"
pool_incompatible_disk_recreate_suggestion	=	"<span class="red-status">This storage pool has one or more drives that are not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">Compatibility List</a>.</span> These drives cannot be used and must be replaced immediately. Check <span class="sm-font-bold">Drive Info</span> to identify the incompatible or unrecognized drives. Make sure to back up the data in this storage pool before removing it. Then, replace them with compatible drives and create a new storage pool. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
pool_incompatible_disk_suggestion	=	"<span class="red-status">This storage pool has one or more drives that are not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">Compatibility List</a>.</span> These drives cannot be used and must be replaced immediately. Check <span class="sm-font-bold">Drive Info</span> to identify the incompatible or unrecognized drives, and replace them with the compatible drives. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
pool_incomplete_caches	=	"Number of incomplete caches"
pool_migrate_shr_to_shr2_and_convert	=	"Change the RAID type from SHR to SHR-2 and convert to a multiple-volume storage pool"
pool_missing_drive_back_partial_reboot_suggestion	=	"<span class="red-status">Undetected drive in this storage pool.</span> Check the drive connection status or refer to <span class="bold-font">Required Drive Info</span> to find out which drive is required and insert it back in your _DISKSTATION_. Restart the system to assemble the storage pool."
pool_missing_drive_back_partial_reboot_suggestion_multiple	=	"<span class="red-status">Undetected drives in this storage pool.</span> Check the drive connection status or refer to <span class="bold-font">Required Drive Info</span> to find out which drives are required and insert them back in your _DISKSTATION_. Restart the system to assemble the storage pool."
pool_missing_drive_back_partial_suggestion	=	"<span class="red-status">Undetected drive in this storage pool.</span> Please check the drive connection status or refer to <b>Required Drive Info</b> below to find out which drive is missing and install it back in your _DISKSTATION_. Also, you can simply click <a class="link-font re-assemble-link" href="#">Online Assemble</a> to assemble the storage pool."
pool_missing_drive_back_partial_suggestion_multiple	=	"<span class="red-status">Undetected drives in this storage pool.</span> Please check the drive connection status or refer to <b>Required Drive Info</b> below to find the missing drives and install them back in your _DISKSTATION_. Also, you can simply click <a class="link-font re-assemble-link" href="#">Online Assemble</a> to assemble the storage pool."
pool_missing_drive_back_reboot_suggestion	=	"<span class="red-status">This storage pool had a missing drive, but that drive is now detected.</span> To assemble the storage pool, restart the system."
pool_missing_drive_back_reboot_suggestion_multiple	=	"<span class="red-status">This storage pool had several missing drives, but these drives are now detected.</span> To assemble the storage pool, restart the system."
pool_missing_drive_back_suggestion	=	"Drives are detected and the storage pool can be re-assembled."
pool_missing_drive_back_suggestion_link	=	"<span class="red-status">A drive in this storage pool was once missing, but a sufficient number of drives has been detected.</span> Please click <a class="link-font re-assemble-link" href="#">Online Assemble</a> to assemble the storage pool and then access the data on the drive."
pool_missing_drive_back_suggestion_link_multiple	=	"<span class="red-status">Drives in this storage pool were once missing, but a sufficient number of drives has been detected.</span> Please click <a class="link-font re-assemble-link" href="#">Online Assemble</a> to assemble the storage pool and then access the data on the drives."
pool_missing_drive_info	=	"Required Drive Info"
pool_missing_no_missing_drive_record_suggestion	=	"<span class="red-status">Insufficient number of drives in this storage pool.</span> Please check the drive connection status or find the required drives and install them back in your _DISKSTATION_ before restarting the system. If you no longer need this storage pool, please click <div class="sm-pool-sug-more-btn-img"></div> > <b>Remove</b> to remove it and then create a new one."
pool_no_p_raid_error_volume_no_mount_suggestion	=	"<span class="red-status">Severe file system errors have occurred because of drive errors in this storage pool.</span> To rescue your data, please sign in to your <a href="https://account.synology.com/support" target="blank">Synology Account</a> and submit a technical support ticket. If you no longer need this storage pool, please click <div class="sm-pool-sug-more-btn-img"></div> > <b>Remove</b> to remove it and then create a new one."
pool_no_p_raid_error_volume_ro_suggestion	=	"<span class="red-status">Unrecoverable errors have occurred because of drive errors in this storage pool.</span> Please back up your data immediately; afterward, return to this storage pool and click <div class="sm-pool-sug-more-btn-img"></div> > <b>Remove</b> to remove the storage pool and then create a new one."
pool_not_allow_operation_child_abnormal	=	"This action can only be performed when the volumes are all in healthy statuses."
pool_online_assemble_desc	=	"Online Assemble can assemble and convert a storage pool previously created on another device back to available status without the hassle of restarting the system. Detailed information about the storage pool to be assembled is shown below."
pool_online_assemble_title	=	"Online Assemble"
pool_opt_hcl_compat_check_fail_active_add	=	"Storage Pool {0} has one or more drives that are not on the Synology Products Compatibility List. To add drives, make sure all drives in the storage pool are compatible."
pool_opt_hcl_compat_check_fail_active_add_fwupgrade	=	"At least one drive in Storage Pool {0} requires a firmware update. Update the firmware immediately and then try again."
pool_opt_hcl_compat_check_fail_active_convert	=	"Storage Pool {0} has one or more drives that are not on the Synology Products Compatibility List. To convert to a multiple-volume storage pool, make sure all drives in the storage pool are compatible."
pool_opt_hcl_compat_check_fail_active_convert_fwupgrade	=	"At least one drive in Storage Pool {0} requires a firmware update. Update the firmware immediately and then try again."
pool_opt_hcl_compat_check_fail_active_migrate	=	"Storage Pool {0} has one or more drives that are not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">Compatibility List</a>. To change RAID type, make sure all drives in the storage pool are compatible."
pool_opt_hcl_compat_check_fail_active_migrate_fwupgrade	=	"At least one drive in Storage Pool {0} requires a firmware update. Update the firmware immediately and then try again."
pool_opt_hcl_compat_check_fail_both_add	=	"On both the active and passive servers, Storage Pool {0} has one or more drives that are not on the Synology Products Compatibility List. To add drives, make sure all drives in the storage pools are compatible."
pool_opt_hcl_compat_check_fail_both_add_fwupgrade	=	"On both the active and passive servers, at least one drive in Storage Pool {0} requires a firmware update. Update the firmware immediately and then try again."
pool_opt_hcl_compat_check_fail_both_migrate	=	"On both the active and passive servers, Storage Pool {0} has one or more drives that are not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">Compatibility List</a>. To change RAID type, make sure all drives in the storage pool are compatible."
pool_opt_hcl_compat_check_fail_both_migrate_fwupgrade	=	"On both the active and passive servers, at least one drive in Storage Pool {0} requires a firmware update. Update the firmware immediately and then try again."
pool_opt_hcl_compat_check_fail_passive_add	=	"On the passive server, Storage Pool {0} has one or more drives that are not on the Synology Products Compatibility List. To add drives, make sure all drives in the storage pool are compatible."
pool_opt_hcl_compat_check_fail_passive_add_fwupgrade	=	"On the passive server, at least one drive in Storage Pool {0} requires a firmware update. Update the firmware immediately and then try again."
pool_opt_hcl_compat_check_fail_passive_migrate	=	"On the passive server, Storage Pool {0} has one or more drives that are not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">Compatibility List</a>. To change RAID type, make sure all drives in the storage pool are compatible."
pool_opt_hcl_compat_check_fail_passive_migrate_fwupgrade	=	"On the passive server, at least one drive in Storage Pool {0} requires a firmware update. Update the firmware immediately and then try again."
pool_opt_hcl_compat_check_fail_passive_pool_setting	=	"On the passive server, Storage Pool {0} has one or more drives that are not on the Synology Products Compatibility List. To modify the settings, make sure all drives in the storage pool are compatible."
pool_opt_hcl_compat_check_fail_passive_pool_setting_fwupgrade	=	"On the passive server, at least one drive in Storage Pool {0} requires a firmware update. Update the firmware immediately and then try again."
pool_permitted_disk_recreate_suggestion	=	"<span class="orange-status">This storage pool contains one or more unverified drives.</span> Using unverified drives may affect system reliability and stability. You can check <span class="bold-font">Drive Info</span> to identify the unverified drives. Make sure to back up the data in this storage pool before removing it. Then, replace the unverified drives and create a new storage pool. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
pool_permitted_disk_suggestion	=	"<span class="orange-status">This storage pool contains one or more unverified drives.</span> Using unverified drives may affect system reliability and stability. You can check <span class="bold-font">Drive Info</span> to identify the unverified drives and replace them with the compatible drives in your _DISKSTATION_. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
pool_previous_location	=	"Previous location"
pool_raid_error_volume_no_mount_suggestion	=	"<span class="red-status">Severe file system errors have occurred because drive errors occurred after storage pool degradation.</span> To rescue your data, please sign in to your <a href="https://account.synology.com/support" target="blank">Synology Account</a> to submit a technical support ticket. If you no longer need this storage pool, please click <div class="sm-pool-sug-more-btn-img"></div> > <b>Remove</b> to remove it and then create a new one."
pool_reach_limited_disk_number	=	"The number of drives in this storage pool has reached its limit ({0})."
pool_remove_blocked_for_cache_repairing	=	"Unable to remove the storage pool or volume while one or more SSD caches in {0} are being repaired. Wait for the process to complete, and then try again."
pool_remove_detected_desc	=	"Following is the detailed information of the available pool that is going to be removed:"
pool_remove_detected_title	=	"Remove Available Pool"
pool_remove_detected_warn	=	"Data on the related drive will be erased. Are you sure you want to continue?"
pool_remove_detected_warn_general	=	"Once the available pool is removed:<br><span class="red-status">1. All data on the associated drives will be erased.</span><br>2. Information about this available pool will no longer be displayed.<br>Are you sure you want to remove this available pool?"
pool_remove_detected_warn_hcl_migrated	=	"Once the available pool is removed:<br><span class="red-status">1. All data on the associated drives will be erased.</span><br>2. The following drives are not on the compatibility list and can no longer be used in this _DISKSTATION_: {0}<br>3. Information about the available pool will no longer be displayed.<br>Are you sure you want to remove this available pool?"
pool_remove_missing_desc	=	"Following is the detailed information of the missing pool that is going to be removed:"
pool_remove_missing_inserted_drive	=	"Inserted drive"
pool_remove_missing_title	=	"Remove the Missing Storage Pool"
pool_repair_need_more_disk	=	"Insufficient number of available drives for repairing this storage pool. Please insert at least 1 drive that matches the following criteria:"
pool_repair_need_more_disks	=	"Insufficient number of available drives for repairing this storage pool. Please insert at least {0} more drives matching the following criteria:"
pool_repair_need_one_more_disk	=	"Insufficient number of available drives for repairing this storage pool. Please insert at least {0} more drive that matches the following criteria:"
pool_replace_need_one_more_disk	=	"No available drives to replace the drives in this storage pool. Insert at least {0} more drive that matches the following criteria:"
pool_required_disks	=	"Number of required drives"
pool_required_insufficient	=	"{0} drives needed"
pool_required_insufficient_cache_note	=	"The system has detected an incomplete SSD cache. Make sure all the SSDs are properly installed. Are you sure you want to continue assembling this SSD cache?"
pool_required_insufficient_disk_note	=	"Before you proceed, make sure all the required drives have been installed in your device. If you choose to continue, the estimated status of the storage pool or volume will become "Degraded", and all data stored on this storage pool will not be protected. Are you sure you want to continue the assembling?"
pool_required_insufficient_note	=	"Make sure all the required drives are installed in your device before proceeding. After being assembled, the storage pool and its volume will be in a "Degraded" status, and any SSD caches will be detected as incomplete. All data stored in this storage pool will no longer be protected. Are you sure you want to continue with assembling?"
pool_required_insufficient_singular	=	"{0} drive needed"
pool_required_sufficient	=	"Sufficient"
pool_setting_ssd_trim_desc	=	"With SSD TRIM enabled, _OSNAME_ will mark the file sectors on the SSD that are no longer in use to free up space on the SSD, thereby reducing unnecessary internal operations in the SSD. This can maintain performance and reduce write amplification. However, the actual benefits depend on the implementation of SSD TRIM on the SSD."
pool_setting_stripe_cache_size_desc	=	"A larger stripe cache size produces better read performance, especially if your system processes sequential reads mostly. However, please select a smaller stripe size if you are certain that your system processes random reads more often."
pool_shr_replace_and_convert	=	"Replace drives and convert to a multiple-volume storage pool"
pool_status_assemble_fail	=	"Assemble failed"
pool_status_assembling	=	"Assembling"
pool_status_attention	=	"Warning"
pool_status_can_assemble	=	"Can be assembled because drives are detected"
pool_status_convert_shr_to_pool	=	"Converting"
pool_status_deactivating	=	"Ejecting"
pool_status_error	=	"Potentially Crashed"
pool_status_expand_unalloc_space	=	"Expanding"
pool_status_expanding	=	"Expanding"
pool_status_has_migrated_disk	=	"Healthy"
pool_status_has_permitted_disk	=	"At risk"
pool_status_has_unverified_disk	=	"At risk"
pool_status_missing	=	"Missing"
pool_status_missing_suggestion	=	"<span class="red-status">Insufficient number of drives in this storage pool.</span> Please check the drive connection status or refer to <b>Required Drive Info</b> below to find out which drive is required and install it back in your _DISKSTATION_. If you no longer need this storage pool, please click <div class="sm-pool-sug-more-btn-img"></div> > <b>Remove</b> to remove it and then create a new one."
pool_status_missing_suggestion_multiple	=	"<span class="red-status">Insufficient number of drives in this storage pool.</span> Please check the drive connection status or refer to <b>Required Drive Info</b> below to find out which drives are required and install them back in your _DISKSTATION_. If you no longer need this storage pool, please click <div class="sm-pool-sug-more-btn-img"></div> > <b>Remove</b> to remove it and then create a new one."
pool_status_not_optimized	=	"Normal but Not Optimized"
pool_status_pool_detected	=	"Detected"
pool_suggestion_expand_link	=	"Detected unused drive space. Please click <a class="link-font pool-expand-link" href="#">expand now</a> to expand this storage pool."
pool_suggestion_unfinished_action_link	=	"Detected unfinished operations. Please click <a class="link-font unfinished-task-link" href="#">here</a> to complete the operations."
pool_type_multi_volume	=	"Support multiple volumes"
pool_type_multi_volume_desc	=	"A storage pool that supports multiple volumes provides higher flexibility. Users can choose to save their packages and services on certain volumes. This type is suitable for users who want to allocate different capacity for each volume and want the volumes to be independent of each other."
pool_type_single_volume	=	"Support only a single volume"
pool_type_single_volume_desc	=	"A storage pool that supports only a single volume provides better performance. This type is suitable for users who are accustomed to storing all their data on the same volume, and creating different folders and access permissions for data management."
pool_type_step_desc	=	"Please select the type of storage pool that you want to create."
pool_unhealthy_recreate_suggestion	=	"<span class="orange-status">One of the drives in this storage pool is no longer in <b>Healthy</b> status.</span> We recommend <a class="link-font" target="_blank" href="https://kb.synology.com/DSM/tutorial/How_to_back_up_your_Synology_NAS">backing up your data</a> immediately. You can check <b>Drive Info</b> below to identify the defective drive and replace it. Then, remove the storage pool and create a new one."
pool_unhealthy_recreate_suggestion_multiple	=	"<span class="orange-status">Several drives in this storage pool are no longer in <b>Healthy</b> status.</span> We recommend <a class="link-font" target="_blank" href="https://kb.synology.com/DSM/tutorial/How_to_back_up_your_Synology_NAS">backing up your data</a> immediately. You can check <b>Drive Info</b> below to identify the defective drives and replace them. Then, remove the storage pool and create a new one."
pool_unrecognized_disk_recreate_suggestion	=	"<span class="red-status">This storage pool contains one or more unrecognized drives.</span> Unrecognized drives cannot be used and must be replaced immediately. Please check <span class="bold-font">Drive Info</span> to identify the unrecognized drives. Make sure to back up the data in this storage pool before removing it. Then, replace the unrecognized drives and create a new storage pool. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
pool_unrecognized_disk_suggestion	=	"<span class="red-status">%POOL_VOLUME_NAME% contains one or more unrecognized drives.</span> Unrecognized drives cannot be used and must be replaced immediately. Please check <span class="bold-font">Drive Info</span> to identify the unrecognized drivess. Then, repair %POOL_VOLUME_NAME% after deactivating and replacing one unrecognized drives at a time. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
pool_unverified_disk_recreate_suggestion	=	"<span class="orange-status">This storage pool contains one or more unverified drives.</span> Using unverified drives may affect system reliability and stability. You can check <span class="bold-font">Drive Info</span> to identify the unverified drives. Make sure to back up the data in this storage pool before removing it. Then, replace the unverified drives and create a new storage pool. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
pool_unverified_disk_suggestion	=	"<span class="orange-status">This storage pool contains one or more unverified drives.</span> Using unverified drives may affect system reliability and stability. You can check <span class="bold-font">Drive Info</span> to identify the unverified drives and replace them with the compatible drives in your _DISKSTATION_. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
pool_usage_append_text_allocated	=	"{0} allocated"
pool_usage_append_text_free	=	"{0} free"
pool_wizard_hcl_compat_check_fail_passive_create_volume	=	"On the passive server, Storage Pool {0} has one or more drives that are not on the Synology Products Compatibility List. To create a volume, make sure all drives in the storage pool are compatible."
pool_wizard_hcl_compat_check_fail_passive_create_volume_fwupgrade	=	"On the passive server, at least one drive in Storage Pool {0} requires a firmware update. Update the firmware immediately and then try again."
raid_process	=	"RAID process"
raid_type_not_support	=	"This _DISKSTATION_ model or the number of drives installed does not support the following RAID type:"
raid_type_requirement_link	=	"<a class="link-font" href="https://www.synology.com/knowledgebase/DSM/help/DSM/StorageManager/storage_pool_what_is_raid" target="_blank">RAID requirements and additional functions</a>"
raid_type_requirement_link_petavolume	=	"<a class="link-font" href="https://kb.synology.com/DSM/help/DSM/StorageManager/storage_pool_what_is_raid" target="_blank">RAID requirements and additional features, such as Btrfs (Peta Volume)</a>"
raid_types_not_support	=	"This _DISKSTATION_ model or the number of drives installed does not support the following RAID types:"
repair_adv_setting_title	=	"Advanced Repair Settings"
repair_type	=	"Repair mode"
replace_action	=	"Replace"
replace_btn	=	"Replace Drive"
replace_choose_new_desc	=	"Select the drive that you want to add to the storage pool."
replace_choose_new_title	=	"Select the drive that you want to add"
replace_choose_replaced_desc	=	"Select the drive that you want to remove from the existing storage pool. The selected drive will be removed from the storage pool after it has been replaced."
replace_choose_replaced_title	=	"Select the drive that you want to remove"
replace_disable_warn_err_status	=	"Drive Replacement cannot be performed under the current storage pool status."
replace_disable_warn_err_type	=	"Drive Replacement is not supported on this RAID type"
replace_disable_warn_none_disk	=	"No drive available for replacement"
replace_title	=	"Replace Drive"
replaced_disk	=	"Replaced drive"
replacing_disk	=	"Added drive"
select_drives_desc	=	"Select at least {1} drives to create a storage pool in {0} configuration."
select_drives_title	=	"Select drives"
shr_add_disk_for_redundancy_hint	=	"For SHR to provide data protection, you can add more drives to the storage pool."
shr_tolerable_drive_desc	=	"(for storage pool comprising at least 2 drives)"
shr_with_two_or_less_disk	=	"SHR configuration (less than 3 drives)"
single_vol_support	=	"Single-volume support"
sm_tree_tab_storage	=	"Storage"
some_raid_type_not_list_hint	=	"If you do not see a specific RAID type listed, it may be because your _DISKSTATION_ does not support it or you have insufficient drives installed. <a class="link-font" href="https://www.synology.com/knowledgebase/DSM/help/DSM/StorageManager/storage_pool_what_is_raid" target="_blank">Learn more</a>"
space_busy	=	"Operations on the storage pool is in progress"
space_busy_feasibility	=	"<b>Storage Manager</b>: Storage pool operations are running. Wait for the operations to complete and try again."
space_remove_note_hcl_migrated	=	"The following drives are not on the compatibility list. Once the storage pool is removed, they can no longer be used in this _DISKSTATION_: {0}"
space_sug_note_label	=	"Note"
stgmgr_upgrade_space_busy_hard_check	=	"Storage pool operations are in progress. For more information, go to Storage Manager > Storage."
storage_pool_desc_optional	=	"Storage pool description (optional)"
storage_pool_type	=	"Storage pool type"
stripe_cache_size_default_scenario	=	"Suitable for most scenarios. A larger stripe cache size allows more system memory to be reserved for data parity calculation."
stripe_cache_size_small_scenario	=	"Suitable for storage pools consisting of HDDs and storing random-access data (e.g., data access on virtual machines). A smaller stripe cache size prevents timeout issues when a large amount of random-access data are written to the HDDs."
vdsm_no_volume_desc	=	"No volumes are found. Please contact your system administrator."
volume_data_full_pool_suggestion_expand_link	=	"Volume {0} is running out of available space and will affect system performance. <a class="link-font pool-expand-link" href="#">Expand the capacity</a> immediately to maintain system stability. <a href="https://sy.to/tutorial_volume_out_of_capacity" target="_blank">Learn more</a>"
volume_diskcheck_desc	=	"Drive check may take a longer time because it is performed simultaneously during storage pool creation."
volume_metadata_full_balance_suggestion	=	"Volume {0} is running out of available space for metadata. Soon you will not be able to add or modify data. To optimize the available space in Volume {0}, click <a class="link-font volume-balance-link" href="#" {1} {2}>volume optimization</a>."
volume_metadata_full_file_delete_suggestion	=	"Volume {0} is running out of available space for metadata. Soon you will not be able to add or modify data. To free up space, delete data you do not need. <a href="https://sy.to/wia5k" target="_blank" class="link-font">Learn more</a>"
volume_metadata_full_pool_add_disk_suggestion	=	"Volume {0} is running out of available space for metadata. Soon you will not be able to add or modify data. To free up space, delete data you do not need. You can also expand this storage pool by installing additional drives and clicking the storage pool's upper-right icon <div class="sm-pool-sug-more-btn-img"></div> > <span class="bold-font">Add Drive</span>. <a href="https://sy.to/wia5k" target="_blank" class="link-font">Learn more</a>"
volume_metadata_full_pool_change_raid_type_suggestion	=	"Volume {0} is running out of available space for metadata. Soon you will not be able to add or modify data. To free up space, delete data you do not need. You can also change the RAID type of this storage pool to one that offers a larger storage capacity. <a href="https://sy.to/wia5k" target="_blank" class="link-font">Learn more</a>"
volume_metadata_full_pool_expand_suggestion	=	"Volume {0} is running out of available space for metadata. Soon you will not be able to add or modify data. Unused drive space is available. Click <a class="link-font pool-expand-link" href="#">expand now</a> to expand the storage pool."
volume_metadata_full_volume_continue_expand_suggestion	=	"Volume {0} is running out of available space for metadata. Soon you will not be able to add or modify data. Click <a class="link-font volume-expand-link" href="#">expand now</a> to complete the volume expansion and expand the volume to {1}."
volume_metadata_full_volume_expand_suggestion	=	"Volume {0} is running out of available space for metadata. Soon you will not be able to add or modify data. To allocate more space to Volume {0}, click the volume's upper-right icon <div class="sm-pool-sug-more-btn-img"></div> > <span class="bold-font">Settings</span> > <span class="bold-font">Modify Size</span> and modify the allocated size."
volume_no_diskcheck_desc	=	"Drive bad sectors will be reconfigured only when the bad sectors are being accessed."
volume_offline_warn_not_allow_data_srcubbing	=	"One or more volumes on Storage Pool {0} need to be prioritized for file system checks. Please complete the file system check before you run data scrubbing on the storage pool."
volume_opt_hcl_compat_check_fail_passive_dedup	=	"On the passive server, Storage Pool {0} has one or more drives that are not on the Synology Products Compatibility List. To configure data deduplication, make sure all drives in the storage pool are compatible."
volume_opt_hcl_compat_check_fail_passive_dedup_fwupgrade	=	"On the passive server, at least one drive in Storage Pool {0} requires a firmware update. Update the firmware immediately and then try again."
volume_opt_hcl_compat_check_fail_passive_defrag	=	"On the passive server, Storage Pool {0} has one or more drives that are not on the Synology Products Compatibility List. To perform file system defragmentation, make sure all drives in the storage pool are compatible."
volume_opt_hcl_compat_check_fail_passive_defrag_fwupgrade	=	"On the passive server, at least one drive in Storage Pool {0} requires a firmware update. Update the firmware immediately and then try again."
volume_opt_hcl_compat_check_fail_passive_transfer_rw	=	"On the passive server, Storage Pool {0} has one or more drives that are not on the Synology Products Compatibility List. To convert a volume to read/write, make sure all drives in the storage pool are compatible."
volume_opt_hcl_compat_check_fail_passive_transfer_rw_fwupgrade	=	"On the passive server, at least one drive in Storage Pool {0} requires a firmware update. Update the firmware immediately and then try again."
volume_opt_hcl_compat_check_fail_passive_usage_detail	=	"On the passive server, Storage Pool {0} has one or more drives that are not on the Synology Products Compatibility List. To enable usage detail analysis, make sure all drives in the storage pool are compatible."
volume_opt_hcl_compat_check_fail_passive_usage_detail_fwupgrade	=	"On the passive server, at least one drive in Storage Pool {0} requires a firmware update. Update the firmware immediately and then try again."
volume_opt_hcl_compat_check_fail_passive_volume_setting	=	"On the passive server, Storage Pool {0} has one or more drives that are not on the Synology Products Compatibility List. To modify the volume settings, make sure all drives in the storage pool are compatible."
volume_opt_hcl_compat_check_fail_passive_volume_setting_fwupgrade	=	"On the passive server, at least one drive in Storage Pool {0} requires a firmware update. Update the firmware immediately and then try again."
warning_remove_missing_pool	=	"<span class="red-status">1. All the data on the inserted drive will be erased.</span><br>2. All the information on this storage pool will no longer be shown.<br>Are you sure you want to continue?"
warning_remove_missing_pool_general	=	"Once the storage pool is removed:<br><span class="red-status">1. All data on the associated drives in this system will be erased.</span><br>2. Information about this storage pool will no longer be displayed.<br>Are you sure you want to remove this storage pool?"
warning_remove_missing_pool_hcl_migrated	=	"Once the storage pool is removed:<br><span class="red-status">1. All data on the associated drives in this system will be erased.</span><br>2. The following drives are not on the compatibility list and can no longer be used in this _DISKSTATION_: {0}<br>3. Information about this storage pool will no longer be displayed.<br>Are you sure you want to remove this storage pool?"
warning_remove_missing_pool_mulit_insert_drives	=	"<span class="red-status">1. All the data on the inserted drives will be erased.</span><br>2. All the information on this storage pool will no longer be shown.<br>Are you sure you want to continue?"
wizard_alert_long_duration_to_raid6_with_one_disk	=	"We recommend selecting at least two drives if you want to reduce the wait time. With only one drive selected, the system may need some days to change the RAID type of this storage pool to RAID 6."
wizard_alert_long_duration_to_shr2	=	"The system may need some days to change the RAID type of this storage pool to SHR-2. Are you sure you want to continue?"
wizard_alert_long_duration_to_shr2_with_hint	=	"We recommend selecting at least two drives if you want to reduce the wait time. With only one drive selected, the system may need some days to change the RAID type of this storage pool to SHR-2."
wizard_container_selector_title	=	"Device"
wizard_disk_step_capacity_not_increase	=	"(A 1-drive SHR storage pool needs to add at least 2 drives to expand its storage capacity.)"
wizard_disk_step_create_shr_capacity_hint	=	"(A 2-drive SHR storage pool is fault-tolerant but has the same capacity as a 1-drive SHR.)"
wizard_disk_step_drag_more_disks	=	"Please drag {0} more drives."
wizard_disk_step_drag_one_more_disk	=	"Please drag 1 more drive."
wizard_disk_step_ebox_dlg_title	=	"Expansion Unit Notice"
wizard_disk_step_empty_hint_link	=	"None of the unused drives in your _DISKSTATION_ meet the drive requirements. <a class="{0}" href="#">View details</a>"
wizard_disk_step_long_hint	=	"The selected RAID type offers only 1-drive fault tolerance. We recommend setting no more than 12 drives per RAID array to ensure data security. Are you sure you want to continue without making any changes?"
wizard_disk_step_old_sblk_detected_multiple	=	"{0} contain data from other storage pools. Please confirm whether you still want to use these drives."
wizard_disk_step_old_sblk_detected_single	=	"{0} contains data from another storage pool. Please confirm whether you still want to use this drive."
wizard_disk_step_reach_disk_limit_multiple	=	"Up to {0} drives can be selected."
wizard_disk_step_reach_disk_limit_single	=	"Only 1 drive can be selected."
wizard_disk_step_repair_still_degrade	=	"The status of Storage Pool is still degraded, we recommend draging more drives to do full repairing, or pressing "Continue" to do partial repairing."
wizard_disk_step_select_more_disks	=	"Please select {0} more drives."
wizard_disk_step_select_one_more_disk	=	"Please select 1 more drive."
wizard_disk_step_unavail_disk_link_multiple	=	"There are <a class="{0}" href="#">{1} drives</a> that do not meet the drive requirements."
wizard_disk_step_unavail_disk_link_single	=	"There is <a class="{0}" href="#">{1} drive</a> that does not meet the drive requirements."
wizard_diskstep_add_drag_multiple	=	"Please drag {0} drives to add to Storage Pool {1}."
wizard_diskstep_add_drag_multiple_atleast	=	"Please drag at least {0} drives to add to Storage Pool {1}."
wizard_diskstep_add_drag_single	=	"Please drag {0} drive to add to Storage Pool {1}."
wizard_diskstep_add_drag_single_atleast	=	"Please drag at least {0} drive to add to Storage Pool {1}."
wizard_diskstep_add_drag_single_atleast_mirror	=	"Drag at least {0} drive to add a mirror drive to Storage Pool {1}."
wizard_diskstep_add_drag_single_mirror	=	"Drag {0} drive to add a mirror drive to Storage Pool {1}."
wizard_diskstep_add_select_multiple	=	"Please select {0} drives to add to Storage Pool {1}."
wizard_diskstep_add_select_multiple_atleast	=	"Please select at least {0} drives to add to Storage Pool {1}."
wizard_diskstep_add_select_single	=	"Please select {0} drive to add to Storage Pool {1}."
wizard_diskstep_add_select_single_atleast	=	"Please select at least {0} drive to add to Storage Pool {1}."
wizard_diskstep_add_select_single_atleast_mirror	=	"Select at least {0} drive to add a mirror drive to Storage Pool {1}."
wizard_diskstep_add_select_single_mirror	=	"Select {0} drive to add a mirror drive to Storage Pool {1}."
wizard_diskstep_add_without_new_disk	=	"Add more drives and then click <b>Next</b>, or simply click <b>Next</b> to skip this step."
wizard_diskstep_convert_drag_multiple	=	"Please drag {0} drives to convert Storage Pool {1} to a multiple-volume storage pool."
wizard_diskstep_convert_drag_multiple_atleast	=	"Please drag at least {0} drives to convert Storage Pool {1} to a multiple-volume storage pool."
wizard_diskstep_convert_drag_single	=	"Please drag {0} drive to convert Storage Pool {1} to a multiple-volume storage pool."
wizard_diskstep_convert_drag_single_atleast	=	"Please drag at least {0} drive to convert Storage Pool {1} to a multiple-volume storage pool."
wizard_diskstep_convert_select_multiple	=	"Please select {0} drives to convert Storage Pool {1} to a multiple-volume storage pool."
wizard_diskstep_convert_select_multiple_atleast	=	"Please select at least {0} drives to convert Storage Pool {1} to a multiple-volume storage pool."
wizard_diskstep_convert_select_single	=	"Please select {0} drive to convert Storage Pool {1} to a multiple-volume storage pool."
wizard_diskstep_convert_select_single_atleast	=	"Please select at least {0} drive to convert Storage Pool {1} to a multiple-volume storage pool."
wizard_diskstep_create_drag_multiple	=	"Please drag {0} drives to create a storage pool with the RAID type of {1}."
wizard_diskstep_create_drag_multiple_atleast	=	"Please drag at least {0} drives to create a storage pool with the RAID type of {1}."
wizard_diskstep_create_drag_single	=	"Please drag {0} drive to create a storage pool with the RAID type of {1}."
wizard_diskstep_create_drag_single_atleast	=	"Please drag at least {0} drive to create a storage pool with the RAID type of {1}."
wizard_diskstep_create_select_multiple	=	"Please select {0} drives to create a storage pool with the RAID type of {1}."
wizard_diskstep_create_select_multiple_atleast	=	"Please select at least {0} drives to create a storage pool with the RAID type of {1}."
wizard_diskstep_create_select_single	=	"Please select {0} drive to create a storage pool with the RAID type of {1}."
wizard_diskstep_create_select_single_atleast	=	"Please select at least {0} drive to create a storage pool with the RAID type of {1}."
wizard_diskstep_migrate_drag_multiple	=	"Please drag {0} drives to change the RAID type of Storage Pool {1} to {2}."
wizard_diskstep_migrate_drag_multiple_atleast	=	"Please drag at least {0} drives to change the RAID type of Storage Pool {1} to {2}."
wizard_diskstep_migrate_drag_single	=	"Please drag {0} drive to change the RAID type of Storage Pool {1} to {2}."
wizard_diskstep_migrate_drag_single_atleast	=	"Please drag at least {0} drive to change the RAID type of Storage Pool {1} to {2}."
wizard_diskstep_migrate_drag_single_atleast_mirror	=	"Please drag at least {0} drive to add a mirror drive to Storage Pool {1}."
wizard_diskstep_migrate_drag_single_mirror	=	"Please drag {0} drive to add a mirror drive to Storage Pool {1}."
wizard_diskstep_migrate_select_multiple	=	"Please select {0} drives to change the RAID type of Storage Pool {1} to {2}."
wizard_diskstep_migrate_select_multiple_atleast	=	"Please select at least {0} drives to change the RAID type of Storage Pool {1} to {2}."
wizard_diskstep_migrate_select_single	=	"Please select {0} drive to change the RAID type of Storage Pool {1} to {2}."
wizard_diskstep_migrate_select_single_atleast	=	"Please select at least {0} drive to change the RAID type of Storage Pool {1} to {2}."
wizard_diskstep_migrate_select_single_atleast_mirror	=	"Please select at least {0} drive to add a mirror drive to Storage Pool {1}."
wizard_diskstep_migrate_select_single_mirror	=	"Please select {0} drive to add a mirror drive to Storage Pool {1}."
wizard_diskstep_migrate_without_new_disk	=	"The current number of drives is sufficient to change the RAID type to {0}. You can directly go to the next step or add more drives first."
wizard_diskstep_raid10_disk_requirement	=	"Please select at least {0} drives. The number of selected drives must be even."
wizard_diskstep_repair_drag_multiple	=	"Please drag {0} drives to repair Storage Pool {1}."
wizard_diskstep_repair_drag_multiple_atleast	=	"Please drag at least {0} drives to repair Storage Pool {1}."
wizard_diskstep_repair_drag_single	=	"Please drag {0} drive to repair Storage Pool {1}."
wizard_diskstep_repair_drag_single_atleast	=	"Please drag at least {0} drive to repair Storage Pool {1}."
wizard_diskstep_repair_select_multiple	=	"Please select {0} drives to repair Storage Pool {1}."
wizard_diskstep_repair_select_multiple_atleast	=	"Please select at least {0} drives to repair Storage Pool {1}."
wizard_diskstep_repair_select_single	=	"Please select {0} drive to repair Storage Pool {1}."
wizard_diskstep_repair_select_single_atleast	=	"Please select at least {0} drive to repair Storage Pool {1}."
wizard_diskstep_unfinish_shr_drag_multiple	=	"Detected unfinished operations. Please drag {0} drives to resume the operations of Storage Pool {1}."
wizard_diskstep_unfinish_shr_drag_multiple_atleast	=	"Detected unfinished operations. Please drag at least {0} drives to resume the operations of Storage Pool {1}."
wizard_diskstep_unfinish_shr_drag_single	=	"Detected unfinished operations. Please drag {0} drive to resume the operations of Storage Pool {1}."
wizard_diskstep_unfinish_shr_drag_single_atleast	=	"Detected unfinished operations. Please drag at least {0} drive to resume the operations of Storage Pool {1}."
wizard_diskstep_unfinish_shr_select_multiple	=	"Detected unfinished operations. Please select {0} drives to resume the operations of Storage Pool {1}."
wizard_diskstep_unfinish_shr_select_multiple_atleast	=	"Detected unfinished operations. Please select at least {0} drives to resume the operations of Storage Pool {1}."
wizard_diskstep_unfinish_shr_select_single	=	"Detected unfinished operations. Please select {0} drive to resume the operations of Storage Pool {1}."
wizard_diskstep_unfinish_shr_select_single_atleast	=	"Detected unfinished operations. Please select at least {0} drive to resume the operations of Storage Pool {1}."
wizard_first_time_volume_alloc_step_title	=	"Allocate volume capacity"
wizard_first_time_volume_info_step_title	=	"Volume information"
wizard_migrate_type_limit_tip	=	"Only certain RAID types can be converted. <a class="link-font raid-type-learn-more" href="#">Learn more</a>"
wizard_repair_check_abnormal_multiple	=	"This storage pool contains several drives in abnormal health status ({0}). We strongly recommend backing up your data before repairing this storage pool. Are you sure you want to repair this storage pool without backing up its data?"
wizard_repair_check_abnormal_single	=	"This storage pool contains one drive in abnormal health status ({0}). We strongly recommend backing up your data before repairing this storage pool. Are you sure you want to repair this storage pool without backing up its data?"
wizard_repair_check_badsec_multiple	=	"This storage pool contains several drives with bad sectors ({0}). We strongly recommend backing up your data before repairing this storage pool. Are you sure you want to repair this storage pool without backing up its data?"
wizard_repair_check_badsec_multiple_abnormal_multiple	=	"This storage pool contains several drives in abnormal health status ({0}) and several with bad sectors ({1}). We strongly recommend backing up your data before repairing this storage pool. Are you sure you want to repair this storage pool without backing up its data?"
wizard_repair_check_badsec_multiple_abnormal_single	=	"This storage pool contains one drive in abnormal health status ({0}) and several with bad sectors ({1}). We strongly recommend backing up your data before repairing this storage pool. Are you sure you want to repair this storage pool without backing up its data?"
wizard_repair_check_badsec_single	=	"This storage pool contains one drive with bad sectors ({0}). We strongly recommend backing up your data before repairing this storage pool. Are you sure you want to repair this storage pool without backing up its data?"
wizard_repair_check_badsec_single_abnormal_multiple	=	"This storage pool contains several drives in abnormal health status ({0}) and one with bad sectors ({1}). We strongly recommend backing up your data before repairing this storage pool. Are you sure you want to repair this storage pool without backing up its data?"
wizard_repair_check_badsec_single_abnormal_single	=	"This storage pool contains one drive in abnormal health status ({0}) and one with bad sectors ({1}). We strongly recommend backing up your data before repairing this storage pool. Are you sure you want to repair this storage pool without backing up its data?"
wizard_replace_choose_replaced_disk_to_continue	=	"Select the drive that you want to remove from the storage pool."
wizard_replace_choose_replacing_disk_to_continue	=	"Select a drive to add to the storage pool."
wizard_replace_no_eligible_drives	=	"No drives matching the requirements are found"
wizard_summary_child_vol_auto_expand	=	"Expand the volume by using unallocated capacity"
wizard_summary_new_hospare_names	=	"Assigned hot spare drive"
wizard_summary_step_maximize_vol_size	=	"Extend volume to maximum size"
wizard_title_create_both	=	"Storage Creation Wizard"
wizard_toast_multiple_disk_size_invalid_req_size	=	"Some of the drives you are dragging do not meet the size requirement for RAID Array {0} (≥ {1})."
wizard_toast_single_disk_size_invalid_req_size	=	"One of the drives you are dragging does not meet the size requirement for RAID Array {0} (≥ {1})."
wizard_user_input_error_dlg_single	=	"The entry for the field {0} is invalid. Please enter a valid value and try again."
wizard_vol_expand_step_chkbox_desc	=	"Expand the capacity of {0} <span class="{2}">(to about {1})</span>"
wizard_vol_expand_step_description	=	"This operation will expand the storage pool capacity and result in unallocated space. If you plan on using only a single volume, you can further allocate that capacity to {0} and expand it."
wizard_vol_expand_step_fs_limit_hint	=	"Due to system limit, volume size can only be expanded to {0}."
wizard_vol_expand_step_note	=	"You can also expand or create a new volume later."
wizard_vol_expand_step_title	=	"Expand the volume by using unallocated capacity"

[storage_report]
duplicates	=	"Duplicates"
modify_time	=	"Modified Time"
user_quota	=	"User Quota"
view_complete_report	=	"View complete report"

[storageanalyzer]
feasibility_share_delete_hard_check	=	"Storage Analyzer is using this shared folder to store generated reports. Before proceeding, go to Storage Analyzer > Settings > General and save the reports to another location."
feasibility_share_delete_soft_check	=	"Storage Analyzer is using this shared folder to store generated reports. If you continue, all the reports will be lost. We recommend going to Storage Analyzer > Settings > General first and save the reports to another location."
feasibility_share_move_hard_check	=	"Storage Analyzer is using this shared folder to store generated reports. Before proceeding, go to Storage Analyzer > Settings > General and save the reports to another location."
feasibility_share_move_soft_check	=	"Storage Analyzer is using this shared folder to store generated reports. To avoid losing the reports, go to Storage Analyzer > Settings > General and save the reports to another location first."
feasibility_share_offline	=	"Storage Analyzer: The package is using a shared folder on this volume. To continue, go to Storage Analyzer > Settings > General and select a different folder to save the generated reports."
feasibility_share_rename_hard_check	=	"Storage Analyzer is using this shared folder to store generated reports. Before proceeding, go to Storage Analyzer > Settings > General and save the reports to another location."
feasibility_share_rename_soft_check	=	"Storage Analyzer is using this shared folder to store generated reports. To avoid losing the reports, go to Storage Analyzer > Settings > General and save the reports to another location first."
feasibility_share_transform_hard_check	=	"Storage Analyzer is using this shared folder to store generated reports. Before proceeding, go to Storage Analyzer > Settings > General and save the reports to another location."
feasibility_share_transform_soft_check	=	"Storage Analyzer is using this shared folder to store generated reports. To avoid losing the reports, go to Storage Analyzer > Settings > General and save the reports to another location first."
feasibility_share_umount_hard_check	=	"Storage Analyzer is using this shared folder to store generated reports. Before proceeding, go to Storage Analyzer > Settings > General and save the reports to another location."
feasibility_share_umount_soft_check	=	"Storage Analyzer is using this shared folder to store generated reports. To avoid losing the reports, go to Storage Analyzer > Settings > General and save the reports to another location first."

[support_center]
enable_fast_support	=	"Enable Diagnosis Service"
error_attach_too_big	=	"Your form has been submitted successfully. A confirmation email has been sent to the email address you previously entered. Synology Support Team will get back to you as soon as possible. (Because your attachment or log is too large to send, we will ask you for it later.)"
error_connect	=	"Failed to connect to Synology server. Please check your network connection."
error_support_ticket_timeout	=	"The page you were viewing has timed out. Please submit your ticket again."
error_system	=	"Unable to perform this operation, possibly because the network connection is unstable or the system is busy. Please try again later."
error_unable_to_retrieve_identifier_key	=	"Not available"
error_unknown	=	"Unable to perform this operation. Please check your network connection and try again later."
expired_date	=	"Access valid until"
fast_support_ai_link	=	"Launch {0}Active Insight{1} for detailed information."
fast_support_desc	=	"Synology Active Insight expedites your troubleshooting process by automatically delivering diagnostic data (e.g., system logs, configuration, status) to Synology Technical Support."
fast_support_description	=	"Diagnosis Service facilitates troubleshooting process with auto-delivered diagnostic data (e.g., system logs, configuration, status) upon submission of a technical support ticket."
fast_support_title	=	"Diagnosis Service"
fast_support_unavailable_desc	=	"Unable to enable Diagnosis Service. Contact Synology Technical Support for further assistance."
fieldset_log	=	"Log Generation"
fieldset_remote	=	"Remote Access"
log_desc	=	"The generated logs will contain the necessary system logs for error diagnosis. Select from the following items related to the issue on your Synology NAS."
log_generate_btn	=	"Generate Logs"
remote_desc	=	"Enable remote access to allow Synology support engineers to access your _DISKSTATION_ remotely for analysis and repair purposes. After enabling this option, please provide us with your admin password and support identification key for Synology Support to sign in. To secure your personal data, make sure your admin password has sufficient strength before enabling this option."
remote_desc_auth_auto	=	"Enable Synology Technical Support to remotely access your _DISKSTATION_ for the purpose of troubleshooting and repair. This remote access is facilitated through a secure connection with a randomly generated account to ensure your privacy during the support session."
send_attach	=	"Processing your attached file or system logs. Synology Support Team will contact you as soon as possible."
sign_in	=	"Sign In"
sign_synology_account	=	"Sign in to Synology Account"
sign_synology_account_desc	=	"Before enabling this function, sign in to your Synology Account first."
sns_identifier_key	=	"Support identification key"
success_send_form	=	"Your form has been successfully submitted. All responses and updates will be recorded in Synology Account, please go to your Synology Account to view the information. Synology Support Team will contact you as soon as possible."
support_channel_chkbox	=	"Enable remote access"
support_fan_debug_mode	=	"Enable system fan debugging mode"
support_form	=	"Contact Support"
support_hibernation_awake_frequently	=	"Wake up frequently"
support_hibernation_cannot_sleep	=	"Unable to hibernate"
support_hibernation_debug_mode	=	"Enable system hibernation debugging mode"
support_hibernation_note	=	"Once hibernation debugging is enabled, other system log tools cannot be enabled."
support_hibernation_problem	=	"Issue encountered"
support_log_level_up	=	"Log more detailed information for diagnosis"
support_log_tool_title	=	"System Log Tools"
support_login_first	=	"To use this service, please sign in to {0} first."
support_services	=	"Support Services"
support_system_stat_dump	=	"Log system status periodically"
title	=	"Support Center"

[surveillance]
surveillance_customized_desc	=	"You can sign in to Surveillance Station directly through a customized port."
surveillance_def_port_range	=	"55736-55863"
surveillance_desc	=	"Enable Surveillance Station to record videos with IP cameras over the network."
surveillance_enable	=	"Enable Surveillance Station 5"
surveillance_enable_customized_https_port	=	"Enable customized port (HTTPS)"
surveillance_enable_customized_port	=	"Enable customized port"
surveillance_manual_port_range	=	"Use the following port range"
surveillance_port_range	=	"MPEG4 streaming port"
surveillance_title	=	"Surveillance Service"

[synohdpack]
enable_message	=	"Would you like to enjoy _OSNAME_ in high resolution? It may take 5~10 minitues to download the high resolution images."

[synoprotection]
notify_victim	=	"DSM has detected that you may be a piracy victim."

[syschecker]
move_service_link_to_share	=	"_OSNAME_ system checker automatically moved [{0}] to the share [{1}]. Please merge the share [{2}] with [{3}]."
rename_service_link	=	"_OSNAME_ system checker discovered an error with [{0}] and has hidden its data. Please contact <a href="https://account.synology.com/support/support_form.php?" target="_blank">Synology online support</a>."
service_link_invalid	=	"_OSNAME_ system checker discovered an error with [{0}]. Please contact <a href="https://account.synology.com/support/support_form.php?" target="_blank">Synology online support</a>."
title	=	"_OSNAME_ system checker"

[syslog]
dlg_testlog_sent	=	"A test log has been sent. Launch the syslog server to confirm the log is successfully sent."
error_quota_not_enough	=	"Operation failed because of reaching the quota limit of this shared folder."
error_sys_no_space	=	"Unable to display logs due to insufficient free space. Refer to <a class="link-font" target="_blank" rel="noreferrer noopener" href="https://sy.to/f543d">this article</a> for more information."
lable_fac_filter	=	"Select the categories of logs you want to send to the syslog server"
lable_sev_filter	=	"Select the priorities of logs you want to send to the syslog server"
setting_svr_ca_import	=	"Import certificate"
setting_svr_enable	=	"Send logs to a syslog server"
setting_svr_format	=	"Log format"
setting_svr_ip	=	"Server"
setting_svr_port	=	"Port"
setting_svr_ssl	=	"Enable secure connection (SSL)"
setting_svr_test	=	"Send test log"
setting_svr_transmode	=	"Transfer protocol"
tip_ip	=	"Server name or IP address"
tip_port_num	=	"Port number"

[system]
cpu_fan	=	"CPU Fan"
eject_sys_database_warning	=	"This storage device contains your _OSNAME_ and package database. Most of your packages will be disabled after ejection. Are you sure you want to proceed?"
fan_status	=	"Fan status"
feasibility_attention_required	=	"Attention Required"
feasibility_hardcheck_reboot_shutdown	=	"Unable to Reboot or Shut Down"
halt_opt	=	"Halt"
none_opt	=	"None"
over_temperature	=	"Over temperature"
performance_options	=	"Performance Options"
performance_profile_desc	=	"To enhance performance, you can select one of the following criteria for allocating system resources based on the services you are using:"
performance_profile_latency_desc	=	"Suitable for services that require stable operation"
performance_profile_latency_opt	=	"Response time (stable latency)"
performance_profile_throughput_desc	=	"Suitable for services that require fast transmission"
performance_profile_throughput_opt	=	"Data transmission (high throughput)"
performance_profile_title	=	"System Performance Tuning"
power_supply	=	"Power supply"
poweroff_opt	=	"Shut Down"
poweron_opt	=	"Startup"
reboot_desc2	=	"_DISKSTATION_ is rebooting. Use Synology Assistant to search the _DISKSTATION_ again after boot-up."
reboot_opt	=	"Restart"
reboot_warn	=	"Are you sure you want to restart?"
require_pgsql	=	"This function requires you to attach an external storage device and enable system database at Control Panel > System Database first."
running_tasks_confirm_reboot	=	"The system is processing the following task(s). Restarting now may cause package abnormality or data loss. Are you sure you want to proceed?"
running_tasks_confirm_shutdown	=	"The system is processing the following task(s). Shutting down now may cause package abnormality or data loss. Are you sure you want to proceed?"
running_tasks_warning	=	"The system is processing the following task(s):"
shutdown_desc2	=	"_DISKSTATION_ is powered off."
shutdown_intro	=	"Restart"
shutdown_warn	=	"Are you sure you want to shut down?"
system_beep_remind	=	"System beep reminder"
system_busy_try_later	=	"The system is busy. Please try again later."
system_delete_share_worm_compliance	=	"The following WriteOnce shared folders are in Compliance mode: <span class="bold-font">{0}</span>"
system_delete_share_worm_snapshot	=	"The following shared folders have immutable snapshots: <span class="bold-font">{0}</span>"
system_fan	=	"Internal Fan"
system_module_fan	=	"Module {0} - Fan {1}"
system_resource_not_enough_desc	=	"The system resource is currently used up running multiple tasks at once. Your _DISKSTATION_ desktop webpage cannot be loaded properly for the time being. Please refresh the webpage later."
system_volume	=	"System Partition"
system_volume_not_enough	=	"The available space of system volume is insufficient. Please free up space and try again."
try_later_warning	=	"Please try again later."

[system_recovery]
default_btn_apply	=	"Restore System"
default_confirm	=	"Click <b>Restore System</b> to open the System Recovery wizard. Your device will be overwritten by the backup data once the restoration begins."
default_confirm_check	=	"Yes, I want to restore the system from a previous backup."
desc_ask_install_brm_pkg	=	"Please install the Active Backup for Business Agent (DSM) package first. Click <b>OK</b> to go to <b>Package Center</b> and install the package."
description	=	"You can restore the entire Synology NAS to a previous restore point via Active Backup for Business. All system configurations and data on this device will be overwritten by the backup data."
description_with_hb	=	"You can restore the entire Synology NAS to a previous backup version via Hyper Backup Vault, C2 Storage, or Active Backup for Business. Performing restoration will overwrite all the system configurations and data on this Synology NAS."
restore_system	=	"Restore System"
restore_the_system	=	"Restore your device"
select_desc	=	"Select the restoration source where the backup for the entire Synology NAS is stored."
select_title	=	"Select your restoration source"
source_abb	=	"Active Backup for Business"
source_c2	=	"C2 Storage"
source_hbv	=	"Hyper Backup Vault"
welcome_desc	=	"Already have a backup?"

[tag_editor]
app_name	=	"Music Information Editor"
edit_music_tag	=	"Edit music information"

[task]
run_all_client_servers	=	"Run this task on all client servers"

[tcpip]
MTU_desc	=	"MTU"
MTU_disable	=	"Disable Jumbo Frame, the MTU value is 1500"
MTU_enable	=	"Enable Jumbo Frame, the MTU value is"
MTU_select	=	"Select the setting you wish to use"
MTU_setting	=	"Jumbo Frame"
MTU_setting_fail	=	"MTU setting failed"
MTU_value	=	"MTU {0}"
admin_port	=	"Default Port Number"
connect_new_ip	=	"Applying network settings..."
dns_gateway	=	"DNS & Gateway"
enable_jumbo_frame	=	"Enable Jumbo Frame"
full_duplex	=	"Full duplex"
half_duplex	=	"Half duplex"
if_speed	=	"{0} Mbps"
ipv6_6in4	=	"6in4"
ipv6_6to4	=	"6to4"
ipv6_auto	=	"Auto"
ipv6_bad_lan	=	"Failed to setup IPv6 LAN route"
ipv6_dhcp	=	"DHCP"
ipv6_dhcp_pd	=	"DHCPv6-PD"
ipv6_duid	=	"DUID"
ipv6_enable_router	=	"Enable IPv6"
ipv6_err_gw_not_link_local	=	"IPv6 gateway requires a link-local address."
ipv6_err_link_local	=	"Unable to set link-local address. Please try a different one."
ipv6_invalid_config	=	"IPv6 config corrupted"
ipv6_ip_used	=	"This IPv6 IP address has been used."
ipv6_loadfail	=	"Unable to load IPv6 configuration, please check your network settings."
ipv6_no_public_ip	=	"Creating an IPv6 tunnel requires an IPv4 public address."
ipv6_off	=	"Off"
ipv6_prefix	=	"Prefix"
ipv6_prefixleng	=	"Prefix length"
ipv6_ra_stateful	=	"Stateful mode"
ipv6_ra_stateful_desc	=	"Obtain IPv6 address and DNS information via DHCPv6."
ipv6_ra_stateless	=	"Stateless mode"
ipv6_ra_stateless_desc	=	"Automatically configure IPv6 addresses only without setting IPv6 DNS server."
ipv6_ra_stateless_dhcpv6	=	"Stateless DHCPv6 mode"
ipv6_ra_stateless_dhcpv6_desc	=	"Automatically configure IPv6 addresses and obtain DNS information via DHCPv6."
ipv6_router	=	"Default gateway"
ipv6_router_err_disable	=	"Failed to disable IPv6 router."
ipv6_router_err_enable	=	"Failed to enable IPv6 router."
ipv6_scope	=	"Scope"
ipv6_scope_compat	=	"Compat"
ipv6_scope_global	=	"Global"
ipv6_scope_link	=	"Link"
ipv6_setup	=	"IPv6 setup"
ipv6_setup_title	=	"IPv6 Setup"
ipv6_setupfail	=	"Failed to setup IPv6"
ipv6_static	=	"Manual"
ipv6_tsp_tunnel	=	"IPv6 Tunneling"
ipv6_tunnel_warning	=	"Please disable IPv6 on other interfaces before proceeding. Are you ready to continue?"
link_status	=	"Network Status"
mru_value_label	=	"MRU value"
mtu_check_network_status	=	"Please check your network connectivity before setting the MTU value."
mtu_range_error	=	"The value should be between {0} and {1}."
mtu_value_label	=	"MTU value"
name_dns_gateway_desc	=	"Enter the server name, DNS server and default gateway information."
not_connected	=	"Not connected"
primary_dns	=	"Preferred DNS server"
rejoin_domain_msg	=	"Changing the server name will disconnect your server from the domain automatically. Please go to Main Menu > Control Panel > Domain/LDAP to rejoin the domain."
remote_ipv4_address	=	"Remote server IPv4 address"
secondary_dns	=	"Alternative DNS server"
self_adjust_mtu	=	"Set MTU value manually"
server_intr	=	"Enter a name for identifying the system on the network."
server_name	=	"Server name"
tcpip_dhcp	=	"Get network configuration automatically (DHCP)"
tcpip_dhcp_failed	=	"No DHCP server responded, or the network was not available."
tcpip_dns1	=	"DNS server"
tcpip_gateway	=	"Default gateway"
tcpip_ip_used	=	"The IP address has been used!"
tcpip_ipaddr	=	"IP address"
tcpip_lan_port	=	"LAN"
tcpip_manual	=	"Use manual configuration"
tcpip_mask	=	"Subnet mask"
tcpip_nameintr	=	"Server name"
tcpip_setting_failed	=	"Failed to set network configuration."
tcpip_v6gateway	=	"IPv6 default gateway"
wimax_connected	=	"Connected"
wimax_connected_time	=	"Connected time"
wimax_network_name	=	"Network name"
wimax_no_network	=	"Network not found"
wimax_scanning	=	"Scanning"
wimax_status	=	"Status"
wired_network	=	"Wired Network"
wireless_auth	=	"Authentication"
wireless_connecting	=	"Connecting"
wireless_connection_fail	=	"Connection failed. Please check the wireless network information you entered."
wireless_connection_success	=	"_DISKSTATION_ has successfully connected to the wireless network"
wireless_disconnect	=	"Disconnect"
wireless_encrypt	=	"Encryption"
wireless_essid	=	"Network name"
wireless_ipv4_setting	=	"Wireless Settings"
wireless_network	=	"Wireless Network"
wireless_password_wep_limit	=	"This can be entered as 5 or 13 ASCII characters, or 10 or 26 hexadecimal characters."
wireless_password_wpa_limit	=	"Password should be between 8 and 63 printable ASCII characters, or up to 64 hexadecimal digits."
wireless_protocol	=	"Protocol"
wireless_request_dongle	=	"Please plug in a wireless dongle first. Visit the <a target="_blank" href="http://www.synology.com/support/faq_show.php?q_id=427">Synology website</a> for the list of supported wireless dongles."
wireless_request_eap	=	"Please enter your username and password."
wireless_request_network	=	"Please select a network"
wireless_request_password	=	"Please enter the password"
wireless_setup	=	"Set up a wireless network"
wireless_setup_adhoc	=	"Create an Ad-Hoc network"
wireless_setup_manual	=	"Connect to a hidden wireless network"
wireless_setup_normal	=	"Join a wireless network"
wireless_signal	=	"Signal strength"
wireless_status	=	"Wireless Status"
wireless_title_finale	=	"Setup Successful"
wireless_title_manual	=	"Manual Setup"
wireless_title_password	=	"Encryption information"
wireless_title_setup	=	"Set up wireless network"
wireless_wizard	=	"Wireless Network Setup Wizard"

[terminal]
forbid_console	=	"Prohibit the use of console port"
ssh_crypto_level	=	"Security level"
ssh_crypto_level_customize	=	"Customize encryption mode"
ssh_crypto_level_desc	=	"You can change the security level of the encryption algorithm. Please note that some clients may be unable to connect due to security level compatibility issues."
ssh_crypto_level_high	=	"High"
ssh_crypto_level_hw_acc_desc	=	"Only using hardware accelerated ciphers may cause some clients to be unable to connect due to compatibility conflicts with security level."
ssh_crypto_level_low	=	"Low"
ssh_crypto_level_medium	=	"Medium"
ssh_crypto_no_algorithm	=	"Please select at least one algorithm."
ssh_enable	=	"Enable SSH service"
ssh_hw_acc_cipher	=	"Hardware accelerated ciphers:<br/>{0}"
ssh_hw_acc_cipher_only	=	"Only use hardware accelerated ciphers"
ssh_hw_acc_cipher_only_desc	=	"Improve the transfer speeds of SSH related services, including encrypted Network Backup and SFTP services, by using hardware accelerated ciphers."
telnet_enable	=	"Enable Telnet service"
telnet_warning	=	"Telnet is not an encrypted protocol. We strongly advise using SSH instead."
terminal_desc	=	"Use Terminal service to login and manage your system. SSH/Telnet only supports logins from accounts belonging to the administrators group. Please refer to {0} for more details."
terminal_disclaimer	=	"Using terminal commands to modify system configs, execute external binary files, add files, or install unauthorized third-party apps may lead to system damages or unexpected behavior, or cause data loss. Make sure you are aware of the consequences of each command and proceed at your own risk.<br><b>Warning</b>: Data should only be stored in shared folders. Data stored elsewhere may be deleted when the system is updated/restarted."
terminal_login_desc	=	"SSH/Telnet only supports logins from accounts belonging to the administrators group. Please refer to {0} for more details."
terminal_password_desc	=	"The password to login via SSH/Telnet is the same as the admin account."
terminal_security_suggest	=	"It is recommended to set a strong password for the login account and enable {0} for maximum system security."
terminal_title	=	"Terminal Service Options"
warning_title	=	"Please note:"

[texteditor]
ApplicationTitle	=	"Text Editor"
AskForceSave	=	"This document contains characters that will not be saved correctly with the selected encoding. To keep the encoding information, please click No and resave the file using the correct encoding. Do you wish to save it anyway?"
CodepageConvertFail	=	"Failed to load "{0}". Please try a different encoding."
FileType	=	"File type"
LoadFileFail	=	"Failed to load "{0}"."
Open	=	"Open..."
OpenWithTextEditor	=	"Open with Text Editor"
SaveFileFail	=	"Failed to save the file."
exceed_load_max	=	"The file exceeds the maximum 10-MB file limit for Text Editor."
file_locked	=	"Cannot save the files. One or more files are protected by WriteOnce. To save other files, close the protected files."

[thirdparty]
appwin_msg	=	"This third-party application is opened in a new window."
thirdapps	=	"Third-party applications"

[thumb_conv_options]
desc	=	"When you upload photos or videos for use with Media Server and Photo Station, thumbnails will be created for better browsing experience. You can set the thumbnail quality and view the progress here.<br><br><font color='red'>Note: </font>Creating high-quality thumbnails will take more time."
description	=	"When you upload photos or videos for use with Media Server and Synology Photos, thumbnails will be created for better browsing experience. You can set the thumbnail quality and view the progress here."
description_router	=	"When you upload photos or videos for use with Media Server, thumbnails will be created for better browsing experience. You can set the thumbnail quality and view the progress here."
high_quality	=	"High Quality"
normal_quality	=	"Normal Quality"
note	=	"Creating high-quality thumbnails will take more time."
thumb_progress	=	"Thumbnail progress"
thumb_quality	=	"Thumbnail quality"
title	=	"Thumbnail Settings"

[thumb_conv_progress]
background_task_desc	=	"For improved viewing compatibility, thumbnails and videos of the uploaded media will be automatically generated."
background_task_title	=	"Generate Thumbnails/Videos"
btn_pause	=	"Pause"
conv_status_converting	=	"Creating thumbnail..."
conv_status_idle	=	"Idle"
conv_status_paused	=	"Paused"
conv_status_scheduled	=	"Scheduled"
conv_status_stopped	=	"Service disabled"
delay_forever	=	"Delay forever"
delay_hours	=	"Delay for {0} hour(s)"
desc	=	"Creating thumbnails demands higher CPU resources. You can delay the process and resume later."
desc_with_set_up_schedule	=	"It may require more CPU resources to generate various file formats from a video for wide compatibility or thumbnails from images. You can delay the process or {0} to run it later."
label_conv_status	=	"Status"
photo	=	"Photo"
photos	=	"Photo"
progress	=	"Progress"
progress_remaining_both	=	"{0} photos and {1} videos remaining"
progress_remaining_photo	=	"{0} photos remaining"
progress_remaining_video	=	"{0} videos remaining"
resume_in	=	"Resume in {0}"
schedule_setting	=	"Conversion schedule"
set_up_schedule	=	"set up a schedule"
status_converting	=	"Processing"
str_photo_progress_desc	=	"Total {0} photos. {1}% completed."
str_photo_total_desc	=	"Total {0} images"
str_progress_photo	=	"Progress of photos"
str_progress_video	=	"Progress of videos"
str_video_total_desc	=	"Total {0} videos"
title	=	"Thumbnail Creation Progress"
videos	=	"Video"

[time]
change_manual_time_setting_warning	=	"Changing the Time Setting may impact the OTP and lead to issues with user logins. We recommend disabling 2-factor authentication before you apply the new Time Setting."
error_ntpserver	=	"The IP address or the server name of the network time server is invalid."
logout_comfirm	=	"You might be logged out after setting time manually. Do you want to continue?"
ntp_client_feasibility_check	=	"Unable to change Time Setting to "Manually" because the following services or tasks are currently running:"
ntp_client_service	=	"NTP Client Service"
ntp_err_enable	=	"Failed to enable NTP service due to unknown error. Please contact Synology Inc."
ntp_not_enable	=	"Not enabled"
ntp_server	=	"NTP Server"
ntp_service	=	"NTP Service"
ntp_service_desc	=	"NTP service allows other network devices to synchronize time with this _DISKSTATION_."
ntp_service_disable_warning	=	"The NTP service is required for Surveillance Station and High Availability cluster and therefore cannot be disabled."
ntp_service_enable	=	"Enable NTP service"
ntp_service_note	=	"NTP service must be enabled when running Surveillance Station or Synology High Availability."
ntp_service_note_no_sha	=	"NTP service must be enabled when running Surveillance Station."
ntp_status	=	"Status"
ntp_status_checking	=	"Checking..."
ntp_status_connection_refused	=	"Unable to sync. The NTP server connection was refused. Refer to {0}this article{1} for details."
ntp_status_network_issue	=	"Unable to sync. There is no network or the network connection is unstable. Refer to {0}this article{1} for details."
ntp_status_success	=	"Normal"
ntp_status_time_out	=	"Unable to sync. The NTP server timed out. Refer to {0}this article{1} for details."
ntp_status_unknown_error	=	"Unable to sync. The operation failed. Refer to {0}this article{1} for details."
ntp_update_failed	=	"Error occurred while {0} was synchronizing with {1}."
ntp_update_progress	=	"{0} is synchronizing with {1}. Please wait."
ntp_update_success	=	"Successfully synchronized with {0}."
ntp_updatenow	=	"Update Now"
ntpdate_daily	=	"Daily"
ntpdate_enable	=	"Synchronize with NTP server"
ntpdate_enable_warning	=	"Changing the Time Setting may impact the OTP and lead to issues with user logins. Resetting OTP may be required."
ntpdate_monthly	=	"Monthly"
ntpdate_period	=	"Sync frequency"
ntpdate_server	=	"Server address"
ntpdate_weekly	=	"Weekly"
over_3_ntp_servers	=	"The maximum number of NTP servers is 3."
past_time_one_month	=	"Past 1 month"
past_time_one_year	=	"Past 1 year"
past_time_six_month	=	"Past 6 months"
past_time_three_year	=	"Past 3 years"
ss_enable_warning	=	"The NTP service has been automatically enabled because it is required for Surveillance Station."
subtitle1	=	"Time Setting"
time_apply_err1	=	"Failed to set time zone."
time_apply_err2	=	"Failed to set NTP (network time protocol) information."
time_apply_err3	=	"Failed to set date or time."
time_date	=	"Date"
time_day	=	"Day"
time_err1	=	"Failed to get date or time."
time_err2	=	"Failed to get time zone."
time_err3	=	"Failed to enumerate time zone."
time_err4	=	"Failed to get NTP (network time protocol) information."
time_hour	=	"Hour(s)"
time_manual	=	"Manually"
time_minute	=	"Minute"
time_month	=	"Month"
time_now	=	"Current Time"
time_second	=	"second(s)"
time_subject	=	"Date Setup"
time_time	=	"Time"
time_week	=	"week"
time_year	=	"Year"
time_zone	=	"Time zone"
time_zone_and_format_title	=	"Date & Time"
time_zone_title	=	"Time Zone"

[timebkp]
tbk_lbl_enable_service	=	"Enable Time Backup service"
tbk_service_desc	=	"Enable this option to allow another Synology server to perform remote Time Backup tasks and store multiple versions of backup data on this _DISKSTATION_."
tbk_service_title	=	"Time Backup"
tbk_warn_netbkp_service_disabled	=	"<font class="red-status"><b>Warning: </b></font>To enable the "Time Backup" service, you should enable the network backup service first. Do you want to enable the service now?"
tbk_warn_netbkp_switch_mode	=	"Warning: To enable Time Backup Service, Network Backup Service should switch to Synology Backup Mode. Do you want to switch the mode now?"

[timezone]
Adelaide	=	"(GMT+09:30) Adelaide"
Alaska	=	"(GMT-09:00) Alaska Standard Time"
Almaty	=	"(GMT+06:00) Almaty, Astana"
Amman	=	"(GMT+02:00) Amman"
Amsterdam	=	"(GMT+01:00) Amsterdam, Berlin, Rome, Stockholm, Vienna"
Arizona	=	"(GMT-07:00) Arizona"
Athens	=	"(GMT+02:00) Athens, Bucharest"
Atlantic	=	"(GMT-04:00) Atlantic Time (Canada)"
Auckland	=	"(GMT+12:00) Auckland, Wellington"
Azores	=	"(GMT-01:00) Azores Standard Time"
Baghdad	=	"(GMT+03:00) Baghdad"
Baku	=	"(GMT+04:00) Baku"
Beijing	=	"(GMT+08:00) Beijing, Chongqing, Hong Kong, Urumqi"
Beirut	=	"(GMT+02:00) Beirut"
Belgrade	=	"(GMT+01:00) Belgrade, Bratislava, Budapest, Prague"
Bogota	=	"(GMT-05:00) Bogota, Lima, Quito, Rio Branco"
Brasilia	=	"(GMT-03:00) Brasilia"
Brisbane	=	"(GMT+10:00) Brisbane"
Brussels	=	"(GMT+01:00) Brussels, Copenhagen, Madrid, Paris"
BuenosAires	=	"(GMT-03:00) Buenos Aires, Georgetown"
CAT	=	"(GMT+02:00) Central Africa Time"
Calcutta	=	"(GMT+05:30) Bombay, Calcutta, Madras, New Delhi, Colombo"
CapeVerde	=	"(GMT-01:00) Cape Verde Is."
Caracas	=	"(GMT-04:30) Caracas"
Casablanc	=	"(GMT+00:00) Casablanca"
Central	=	"(GMT-06:00) Central Time (US & Canada)"
Chihuahua	=	"(GMT-07:00) Chihuahua, Mazatlan"
Darwin	=	"(GMT+09:30) Darwin"
Dhaka	=	"(GMT+06:00) Dhaka"
Dublin	=	"(GMT+00:00) Dublin, Edinburgh, Lisbon, London"
EET	=	"(GMT+02:00) Eastern Europe Standard Time"
EastIndiana	=	"(GMT-05:00) Indiana (East)"
Eastern	=	"(GMT-05:00) Eastern Time (US & Canada)"
Egypt	=	"(GMT+02:00) Egypt Standard Time; Cairo"
Ekaterinburg	=	"(GMT+05:00) Ekaterinburg"
Fiji	=	"(GMT+12:00) Fiji"
GMT+1	=	"(GMT+01:00) Western & Central Europe"
GMT+2	=	"(GMT+02:00) Eastern Europe Standard Time"
GMT-2	=	"(GMT-02:00) Mid-Atlantic Standard Time"
GMT-3	=	"(GMT-03:00) Brasilia"
Godthab	=	"(GMT-03:00) Greenland Standard Time; Nuuk(Godthab)"
Guam	=	"(GMT+10:00) Guam, Port Moresby"
Guatemala	=	"(GMT-06:00) Central America Standard Time; Guatemala"
Harare	=	"(GMT+02:00) Harare, Pretoria"
Hawaii	=	"(GMT-10:00) Hawaii Standard Time"
Helsinki	=	"(GMT+02:00) Helsinki, Kyiv, Riga, Sofia, Tallinn, Vilnius"
Irkutsk	=	"(GMT+08:00) Irkutsk"
Israel	=	"(GMT+02:00) Israel Standard Time; Jerusalem"
Istanbul	=	"(GMT+03:00) Istanbul"
Jakarta	=	"(GMT+07:00) Bangkok, Hanoi, Jakarta"
Kabul	=	"(GMT+04:30) Afghanistan Standard Time; Kabul"
Kamchatka	=	"(GMT+12:00) Kamchatka, Marshall Is."
Karachi	=	"(GMT+05:00) Karachi, Islamabad, Tashkent"
Katmandu	=	"(GMT+05:45) Kathmandu"
Krasnoyarsk	=	"(GMT+07:00) Krasnoyarsk"
Kuwait	=	"(GMT+03:00) Kuwait, Riyadh"
Kwajalein	=	"(GMT+12:00) Kwajalein"
La_Paz	=	"(GMT-04:00) La Paz"
Magadan	=	"(GMT+11:00) Magadan, Solomon Is."
Manaus	=	"(GMT-04:00) Manaus"
Melbourne	=	"(GMT+10:00) Melbourne, Sydney, Canberra"
MexicoCity	=	"(GMT-06:00) Mexico City; Tegucigalpa"
Midway	=	"(GMT-11:00) Samoa Standard Time; Midway Is."
Minsk	=	"(GMT+03:00) Minsk"
Monrovia	=	"(GMT+00:00) Monrovia, Reykjavik"
Montevideo	=	"(GMT-03:00) Montevideo"
Moscow	=	"(GMT+03:00) Moscow, St. Petersburg, Kazan, Volgograd"
Mountain	=	"(GMT-07:00) Mountain Time (US & Canada)"
Muscat	=	"(GMT+04:00) Abu Dhabi, Muscat"
Nairobi	=	"(GMT+03:00) Nairobi"
Newfoundland	=	"(GMT-03:30) Newfoundland"
Noumea	=	"(GMT+11:00) New Caledonia"
Novosibirsk	=	"(GMT+07:00) Novosibirsk"
Pacific	=	"(GMT-08:00) Pacific Time (US & Canada); Tijuana"
Perth	=	"(GMT+08:00) Perth"
Rangoon	=	"(GMT+06:30) Yangon(Rangoon)"
Santiago	=	"(GMT-04:00) Santiago"
Sarajevo	=	"(GMT+01:00) Sarajevo, Skopie, Warsaw, Zagreb"
Saskatchewan	=	"(GMT-06:00) Saskatchewan"
Seoul	=	"(GMT+09:00) Seoul"
Singapore	=	"(GMT+08:00) Kuala Lumpur, Singapore"
South_Georgia	=	"(GMT-02:00) Mid-Atlantic Standard Time"
Taipei	=	"(GMT+08:00) Taipei"
Tasmania	=	"(GMT+10:00) Tasmania Standard Time; Hobart"
Tbilisi	=	"(GMT+04:00) Tbilisi"
Tehran	=	"(GMT+03:30) Iran Standard Time; Tehran"
Tokyo	=	"(GMT+09:00) Tokyo, Osaka, Sapporo"
Ulaanbaatar	=	"(GMT+08:00) Ulaanbaatar"
Vladivostok	=	"(GMT+10:00) Vladivostok"
WAT	=	"(GMT+01:00) Western Africa Time"
Windhoek	=	"(GMT+01:00) Windhoek"
Yakutsk	=	"(GMT+09:00) Yakutsk"
Yerevan	=	"(GMT+04:00) Yerevan"

[tinymce]
align_center	=	"Center"
align_justify	=	"Justify"
align_left	=	"Align left"
align_right	=	"Align right"
attach_file	=	"Attach file"
background_color	=	"Background color"
bold	=	"Bold"
bullet_list	=	"Bullets"
clear_formatting	=	"Clear formatting"
decrease_indent	=	"Decrease indent"
font_family	=	"Font"
font_size	=	"Font Size"
horizontal_line	=	"Horizontal line"
increase_indent	=	"Increase indent"
italic	=	"Italic"
numbered_list	=	"Numbering"
strikethrough	=	"Strikethrough"
subscript	=	"Subscript"
superscript	=	"Superscript"
text_color	=	"Font color"
underline	=	"Underline"

[tls_profile]
customize_setting	=	"Custom Settings"
default_profile	=	"Default profile"
description	=	"TLS and SSL are common encrypted protocols for secure connections. You can choose different cipher suites that best fit your needs. Click {0}here{1} to learn more about versions supported by each compatibility level."
incompatible_client	=	"Once selected, only HTTP connection is allowed for your Surveillance Station and Synology mobile applications running on Android 5.0 or earlier."
incompatible_client_for_modern	=	"Once selected, only HTTP connection is allowed for Synology mobile apps on iOS (except Synology Photos) and Android 9.0 or earlier."
intermediate	=	"Intermediate compatibility"
intermediate_desc	=	"This setting is recommended as it provides general browser compatibility and does not support most identified insecure cipher suites."
modern	=	"Modern compatibility"
modern_desc	=	"This setting disallows outdated cipher suites to achieve higher security levels but only supports modern browsers."
notify_modern_level	=	"Please note that this option may disconnect connected devices. {0}Learn more{1}"
old	=	"Old backward compatibility"
old_desc	=	"This setting allows outdated insecure cipher suites and is compatible with most browsers. Only select this setting if you need to maintain high browser compatibility."
profile_level	=	"Profile Level"
services	=	"Service"
title	=	"TLS / SSL Profile Level"

[tree]
backup_service_desc	=	"Backup Services makes your _DISKSTATION_ a backup destination for remote Synology servers."
closepage	=	"Close"
errorpage	=	"Error"
leaf_3update	=	"Update"
leaf_about	=	"About"
leaf_about_desc	=	"Read copyright and trademark notices"
leaf_account	=	"Account"
leaf_account_security	=	"Account"
leaf_appprivilege	=	"Application Privileges"
leaf_appprivilege_desc	=	"Application Setting"
leaf_audio	=	"Audio Station"
leaf_audiostation_desc	=	"Manage Audio Station"
leaf_autoblock	=	"Auto Block"
leaf_autoblock_desc	=	"Set up auto block to prevent unauthorized login"
leaf_backup	=	"Backup"
leaf_backup_desc	=	"Backup setup"
leaf_backup_service	=	"Backup Service"
leaf_bkp	=	"Configuration Backup"
leaf_bkp_restore_router	=	"Configuration Backup and Restore"
leaf_cloud_service	=	"QuickConnect"
leaf_cms	=	"CMS"
leaf_cms_desc	=	"Synology CMS (Central Management System) allows you to efficiently and conveniently manage multiple _DISKSTATION_ devices. It provides a single interface to monitor the status of multiple servers, create policies for batch editing the settings of server groups, and keep each server in your fleet up-to-date and running smoothly. Administrator permissions for groups or individual servers can be delegated to specific users or groups, allowing each administrator to control and manage certain configurations, further increasing administrative efficiency and flexibility."
leaf_confbkp_desc	=	"You can back up the system configuration or restore all your settings via a .dss file"
leaf_control_panel	=	"Control Panel"
leaf_control_panel_desc	=	"Manage system settings related to file sharing services, network connectivity, hardware, applications, and much more."
leaf_default	=	"Factory Reset"
leaf_default_desc	=	"Restore {0} to factory default settings"
leaf_desktop	=	"Desktop"
leaf_dhcp_server	=	"DHCP Server"
leaf_dos	=	"Denial-of-Service (DoS) Protection"
leaf_dos_and_vpnpassthrough	=	"Protection"
leaf_download	=	"Settings"
leaf_download_desc	=	"Manage Download Station"
leaf_downloadtask	=	"Tasks"
leaf_downloadtask_desc	=	"Create and manage download tasks"
leaf_dsm	=	"DSM Settings"
leaf_dsm_desc	=	"Modify login and connection settings"
leaf_esata	=	"eSATA Disk"
leaf_esata_desc	=	"Format and manage the eSATA disk"
leaf_file_browser_desc	=	"File Station lets you easily view, organize, and manage files."
leaf_file_services	=	"File Services"
leaf_file_services_desc	=	"Manage shared folders, various file sharing services, or control file access permissions."
leaf_filebrowser	=	"File Station"
leaf_filebrowser_desc	=	"File Station"
leaf_filestation	=	"File Station"
leaf_firewall	=	"Firewall"
leaf_firewall_desc	=	"Create firewall rules to protect your server"
leaf_ftp	=	"FTP"
leaf_ftp_desc	=	"Manage the FTP service"
leaf_ftpes	=	"FTPS"
leaf_group	=	"Group"
leaf_group_desc	=	"Manage group accounts and members"
leaf_hardware_power	=	"Hardware & Power"
leaf_hddmgr	=	"HDD/SSD"
leaf_hddmgr_desc	=	"Turn on the disk write cache to improve I/O performance"
leaf_home	=	"Summary"
leaf_index_service	=	"Indexing Service"
leaf_info_center	=	"Info Center"
leaf_info_center_desc	=	"Displays basic information related to hardware specifications, network, storage, and services."
leaf_iscsi	=	"iSCSI"
leaf_iscsi_desc	=	"Create and manage iSCSI targets/LUNs"
leaf_iscsilun	=	"LUN"
leaf_iscsitrg	=	"iSCSI Target"
leaf_iscsitrg_desc	=	"Create and manage iSCSI targets"
leaf_itunes	=	"iTunes"
leaf_itunes_desc	=	"Manage iTunes service for streaming music to iTunes clients"
leaf_lan	=	"Network"
leaf_lan_desc	=	"Configure network settings"
leaf_language	=	"Language"
leaf_language_desc	=	"Set up language options"
leaf_log	=	"Log"
leaf_log_desc	=	"View system, connection, and backup logs"
leaf_logout	=	"Sign Out"
leaf_mailstation	=	"Mail Server"
leaf_mailstation_desc	=	"Manage Mail Server"
leaf_media_library	=	"Media Indexing"
leaf_media_library_desc	=	"Automatically scan multimedia files, such as photos, music, and videos, and compile them into a multimedia library to be used by multimedia applications."
leaf_mediaservice	=	"Media Server"
leaf_mediaservice_desc	=	"Manage media server and settings for DLNA/UPnP devices"
leaf_mysql	=	"MySQL"
leaf_netbkp	=	"Network Backup Destination"
leaf_netbkp_desc	=	"Browse/Edit the setup of the network backup or do the network recovery"
leaf_netbkpservice	=	"Network Backup"
leaf_netbkpservice_desc	=	"Start/Stop the service of the network backup"
leaf_nfs	=	"NFS"
leaf_nfs_desc	=	"NFS service management"
leaf_notestation	=	"Note Station"
leaf_notification	=	"Notification"
leaf_notification_desc	=	"Set up email accounts to receive notifications from the {0}"
leaf_overview	=	"Overview"
leaf_packagemanage	=	"Package Center"
leaf_packagemanage_desc	=	"Browse, download, install various kinds of packages and applications."
leaf_photo	=	"Photo Station"
leaf_photostation_desc	=	"Manage Photo Station"
leaf_powermgr	=	"Power"
leaf_powermgr_desc	=	"Enable Power Recovery and Disk Hibernation"
leaf_pppoe	=	"PPPoE"
leaf_pppoe_desc	=	"Connect to the Internet via PPPoE"
leaf_protection	=	"Protection"
leaf_public_access	=	"External Access"
leaf_public_access_desc	=	"Manage external access related settings, such as QuickConnect, DDNS, or router configuration."
leaf_raid	=	"Disk Group"
leaf_region	=	"Regional Options"
leaf_region_desc	=	"Configure system time and language options"
leaf_routerconf	=	"Router Configuration"
leaf_routerconf_desc	=	"Set up router port forwarding service"
leaf_rsrcmonitor	=	"Resource Monitor"
leaf_rsrcmonitor_desc	=	"Monitor the usage of CPU, memory, volume and the network flow."
leaf_rsync	=	"rsync (Shared Folder Sync, LUN Backup on supported models)"
leaf_rsync_service	=	"rsync service"
leaf_sdcard	=	"SD Card"
leaf_sdcopy	=	"SDCopy"
leaf_security	=	"Security"
leaf_security_desc	=	"Protect the system by setting up firewall, auto block, and DoS protection."
leaf_server	=	"Status"
leaf_server_desc	=	"View current system information and status"
leaf_service	=	"Web Services"
leaf_service_desc	=	"Manage Web services and applications"
leaf_sftp	=	"SFTP"
leaf_sharefolder	=	"Shared Folder"
leaf_sharefolder_desc	=	"Manage shared folders and access rights"
leaf_smart	=	"S.M.A.R.T."
leaf_smart_desc	=	"View/Test disk S.M.A.R.T. information"
leaf_smartblock	=	"Account Protection"
leaf_smsnotify	=	"SMS Notification"
leaf_smsnotify_desc	=	"Set up SMS information to receive SMS notifications."
leaf_snmp	=	"SNMP"
leaf_snmp_desc	=	"SNMP service management"
leaf_storage	=	"Storage"
leaf_style	=	"Theme"
leaf_surveillance	=	"Surveillance Station"
leaf_surveillance_desc	=	"Manage Surveillance Station"
leaf_terminal	=	"Terminal"
leaf_terminal_desc	=	"Terminal service management"
leaf_terminal_snmp	=	"Terminal & SNMP"
leaf_terminal_snmp_desc	=	"Enable services to log in with Telnet and SSH, or configure options to monitor your _DISKSTATION_ device using network management software."
leaf_texteditor	=	"Text Editor"
leaf_texteditor_desc	=	"Quickly edit text or code files with this highly versatile text editor."
leaf_time	=	"Time"
leaf_time_desc	=	"Configure system time"
leaf_tunnel	=	"Tunnel"
leaf_update	=	"DSM Update"
leaf_update_desc	=	"Update _OSNAME_ for the latest features"
leaf_update_reset	=	"Update & Restore"
leaf_update_reset_desc	=	"Update the newest version of _OSNAME_ or restore original manufacturer settings."
leaf_ups	=	"UPS"
leaf_ups_desc	=	"Manage the UPS service"
leaf_usbbkp	=	"Local Backup Destination"
leaf_usbcopy	=	"USBCopy"
leaf_usbcopy_desc	=	"Select the destination shared folder for USBCopy"
leaf_usbdisk	=	"USB Disk"
leaf_usbdisk_desc	=	"Format and manage USB disks"
leaf_usbdisk_header	=	"USB disk"
leaf_usbprint	=	"USB Printer"
leaf_usbprint_desc	=	"View USB printer status"
leaf_user	=	"User"
leaf_user_desc	=	"Manage user accounts"
leaf_user_group	=	"User & Group"
leaf_user_group_desc	=	"Manage user and group accounts"
leaf_version_bkp	=	"Synology Backup"
leaf_volgeneral_desc	=	"Get the basic guide of RAID, volumes, and Disk Group supported by _DISKSTATION_"
leaf_volmanager	=	"Volume Manager"
leaf_volmanager_desc	=	"Create and manage volumes"
leaf_volume	=	"Volume"
leaf_volume_desc	=	"Create and manage volumes"
leaf_wanconfig	=	"DDNS"
leaf_wanconfig_desc	=	"Set up the DDNS service"
leaf_web	=	"Web Station"
leaf_webdav	=	"WebDAV"
leaf_winmac	=	"SMB/AFP"
leaf_winmac_desc	=	"Set up the file service for Windows and Mac computers"
leaf_winmacnfs	=	"SMB/AFP/NFS"
leaf_winmacnfs_desc	=	"Set up the file sharing service for Windows and Mac computers"
leaf_wireless	=	"Wireless"
leaf_wireless_ap	=	"Hotspot"
leaf_wireless_desc	=	"Connect to a wireless network, create a wireless hotspot, or manage Bluetooth device settings."
nochangepage	=	"No Change"
node_app_setting	=	"Application Settings"
node_apps	=	"Applications"
node_backup	=	"Backup"
node_connection	=	"Connectivity"
node_device	=	"External Devices"
node_device_desc	=	"Attached devices"
node_download	=	"Download Station"
node_file_sharing_privileges	=	"File Sharing and Privileges"
node_fileserv	=	"File Sharing"
node_lan	=	"Network Services"
node_lan_desc	=	"Network services setup"
node_personal	=	"User"
node_privileges	=	"Application Privileges"
node_privileges_desc	=	"View and edit users' privileges for individual services and applications."
node_server	=	"System"
node_server_desc	=	"System settings"
node_sic	=	"Internet Connection"
node_status	=	"Information"
node_status_desc	=	"Information and logs"
node_storage	=	"Storage"
node_storage_desc	=	"Storage setup"
node_wizard	=	"Wizard"
okpage	=	"Succeeded"
performance	=	"Performance"
personal_quota	=	"Volume Usage"
restitle	=	"Result"
restoredefaults	=	"System Reset"
services	=	"Services"
tree_filemonitor	=	"File Task Monitor"
tree_modulelist	=	"All functions"
volume_general	=	"General"

[trustdevice]
confirm_revoke_all_devices	=	"Revoke All"
confirm_revoke_all_devices_desc	=	"2-factor authentication will be required if you wish to sign in again."
confirm_revoke_all_devices_title	=	"Revoke all devices from trusted list"
enable_otp_to_manage_trustdevice	=	"You need to enable 2-factor authentication first."
manage_trust_device	=	"Manage Trusted Devices"
manage_trusted_device_desc	=	"Trusted devices can skip the second step even with 2-factor authentication enabled."
other_devices_trusted	=	"Other remembered devices"
other_devices_trusted_desc	=	"You may revoke other devices that have been remembered. This means that 2-factor authentication will be required the next time you sign in to _OSNAME_ on these devices."
revoked_all_trusted_success	=	"Revoked all trusted devices."
this_device_trusted	=	"Current device obtained trust on {0}"
this_device_trusted_desc	=	"You have chosen to remember this device on {0}. 2-factor authentication is no longer required when you sign in to DSM on this device."
this_device_untrusted	=	"Current device is not remembered"
this_device_untrusted_desc	=	"This device is not remembered yet. You are required to pass 2-factor authentication every time you sign in to DSM on this device."
trust_device	=	"Remembered Devices"
trust_device_notes	=	"You can manage the devices that you use the most at Account Activity > Remembered Devices."
trust_this_device	=	"Remember this device"
untrust_other_devices	=	"Revoke Other Devices"
untrust_this_device	=	"Revoke"

[tunnel]
ipv6_tunnel_remove_message	=	"Availability of this function will be ended in {0}."
tunnel_auth	=	"Connect with an existing account"
tunnel_check	=	"Enable tunnel"
tunnel_conn_fail	=	"Connection failed. Please check your network settings or contact the service provider."
tunnel_globalip	=	"External address"
tunnel_intr	=	"Enable tunnel to allow IPv6 protocol to tunnel over the existing IPv4 network structure."
tunnel_isp	=	"Server address"
tunnel_noauth	=	"Connect anonymously"
tunnel_password	=	"Password"
tunnel_status	=	"Connection status"
tunnel_username	=	"User name"

[tutorial]
backup_backup	=	"Back up your Synology NAS"
backup_backup_from_computer	=	"Back up data from your computer"
cloud_set_up_quickconnect	=	"Access your Synology NAS over the Internet and share files"
dsm_get_started	=	"Get Started With DSM"
dsm_get_started_desc	=	"You can learn how to implement essential DSM features here."
home_theater_media_server	=	"Enjoy your stored multimedia contents on big screens"
home_theater_music	=	"Enjoy your stored music with Audio Station"
home_theater_videos	=	"Organize and Play Videos with Video Station"
manage_share_photos	=	"Create albums to manage photos in Photo Station"
secure_your_nas	=	"Secure your Synology NAS"
store_with_mac	=	"Store files from a Mac computer within the local network"
store_with_windows	=	"Store files from a Windows PC within the local network"
tutorial_back_to_top	=	"Return to top"
tutorial_homepage_backupdata_subtitle	=	"Back up your data from your computer or Synology NAS to ensure data security."
tutorial_homepage_backupdata_title	=	"Back up your data"
tutorial_homepage_buildcloud_subtitle	=	"Remotely access and share files over the Internet, or sync files among multiple client devices."
tutorial_homepage_buildcloud_title	=	"Build your own cloud"
tutorial_homepage_desc	=	"Need help to do any of the following?"
tutorial_homepage_learnmore_subtitle	=	"For more information about your Synology NAS, please refer to our DSM Online Help."
tutorial_homepage_learnmore_title	=	"Learn more"
tutorial_homepage_managephotos_subtitle	=	"Create albums to manage and browse photos over the Internet, or share them with others."
tutorial_homepage_managephotos_title	=	"Manage and share your photos"
tutorial_homepage_securenas_subtitle	=	"Scan settings and define blocking rules to protect Synology NAS from malicious attacks."
tutorial_homepage_securenas_title	=	"Secure your Synology NAS"
tutorial_homepage_setuptheater_subtitle	=	"Enjoy multimedia contents with Smart TV/DLNA devices, or stream them over the Internet."
tutorial_homepage_setuptheater_title	=	"Set up your home theater"
tutorial_homepage_storefiles_subtitle	=	"Store files to Synology NAS and access them via file browser or Finder on your computer."
tutorial_homepage_storefiles_title	=	"Store files to Synology NAS"
tutorial_homepage_title	=	"Tutorial"

[ui]
active	=	"Active Server"
passive	=	"Passive Server"

[uicommon]
copy	=	"Copy"
cut	=	"Cut"
err_disk_secure_erasing	=	"The system cannot be shut down, rebooted or updated when performing Secure Erase. Please try again after the operation is completed."
err_dsm_upgrading	=	"The system cannot be shut down or rebooted because a _OSNAME_ update is in progress."
error_upgrading	=	"System is upgrading. Please log in later."
files_selected	=	"{0} files selected"

[unsupported_browsers]
click_anyway	=	"Sign in anyway"
desc	=	"We want your browsing experience to be fast, secure, and the best it can possibly be. To continue, please update the browser or switch to a supported browser. See all <a class="link-font" target="_blank" href="{0}">supported browsers</a>."
title	=	"This browser may not be supported"

[update]
autoupdate	=	"Check and download update regularly"
autoupdate_cancel_confirm_text	=	"_OSNAME_ automatic update has already started. Do you want to cancel the installation?"
autoupdate_cancel_failed	=	"Failed to cancel the installation."
autoupdate_cancel_failed_no_task	=	"No _OSNAME_ update installation is running right now."
autoupdate_cancel_failed_running	=	"_OSNAME_update installation is in progress and cannot be cancelled."
autoupdate_cancel_noti_link	=	"Click here to cancel the current _OSNAME_ update installation."
autoupdate_cancel_success	=	"Successfully cancelled the installation."
autoupdate_enable	=	"Check for _OSNAME_ updates automatically"
autoupdate_noti_cancel_confirm_text	=	"Are you sure you want to cancel the current _OSNAME_ update installation?"
autoupdate_noti_title_err	=	"_OSNAME_ Auto Update Failed"
autoupdate_schedule_desc	=	"_OSNAME_ updates will be installed automatically before the scheduled shutdown."
autoupdate_time_desc	=	"Installation schedule"
autoupdate_time_notify_desc	=	"Notification schedule"
autoupdate_time_notify_notice	=	"More notification settings can be edited at {0}."
autoupdate_title	=	"_OSNAME_ Auto Update"
autoupdate_type_all	=	"Install newest _OSNAME_ update automatically"
autoupdate_type_download	=	"Download _OSNAME_ updates but let me choose whether to install them"
autoupdate_type_hotfix	=	"Install important _OSNAME_ updates automatically"
autoupdate_type_notify	=	"Notify me of _OSNAME_ updates but let me choose whether to install them"
check_new_dsm	=	"Checking for the latest _OSNAME_ update..."
check_new_dsm_err	=	"Connection failed. Please check your Internet connection."
dns_ip_to_self	=	"Your DNS server currently points at the IP address of your _DISKSTATION_. To avoid potential network problems after updating _OSNAME_, please go to Control Panel > Network and set a different alternative DNS server."
download_replace_info	=	"{0} will replace the downloaded {1}"
download_replace_question	=	"Are you sure you want to download it?"
dsm_busy_updating	=	"_OSNAME_ updating is in process..."
enable_new_update_setting_button	=	"Set up Now"
enable_new_update_setting_content	=	"To strengthen the protection for your system, we are introducing an option that lets your system automatically install important updates."
enable_new_update_setting_note	=	""Automatically install important DSM or packages updates" options will be enabled after clicking OK. If you want to change the update settings, you can go to the {0}Control Panel > Update & Restore > DSM Update > Update Settings{1} or {2}Package Center > Settings{3}."
enable_new_update_setting_title	=	"New Update Option"
error_aha_net	=	"Failed to upgrade. Please make sure the LAN and Heartbeat connections in the high-availability cluster are normal."
error_apply_lock	=	"Failed to apply your settings because another installation is in progress."
error_bad_dsm_version	=	"The update you are applying is not compatible with this version of _OSNAME_. Please get the compatible file and try again."
error_bkp_bootmedia	=	"An operation error (_ERRNO_) occurred while backing up the boot disk. Please contact <a href="http://www.synology.com" target="_blank">Synology Technical Support</a>."
error_bootmedia_space	=	"The available boot disk space is insufficient. Please refer to <a href="https://www.synology.com/knowledgebase/DSM/tutorial/General_Setup/DSM_update_insufficient_system_capacity_for_update" target="_blank">this article</a> to troubleshoot issues."
error_bootmediaop	=	"There is an operation error ({0}) when accessing the boot disk."
error_ccc_not_health	=	"Updating _OSNAME_ on the virtualization cluster requires all hosts to be online. Please check and try again."
error_ccc_prepare	=	"An error occurred while updating _OSNAME_ on the virtualization cluster. Please restart and try again."
error_ccc_vdsm_running	=	"Updating the virtualization cluster requires all virtual machines to be powered off. Please shut down all virtual machines and try again."
error_company	=	"Incompatible upgrade file."
error_dirop	=	"There is a temporary directory access error ({0}) during the update."
error_downgrade	=	"_OSNAME_ cannot be rolled back to an earlier version. The applied _OSNAME_ must be newer than the current one."
error_download	=	"Failed to download the _OSNAME_ installation file. Please check the network connection and try again."
error_filename	=	"You have selected a file with incorrect extension. Please make sure the file extension is ".pat" which is not case-sensitive."
error_ha_is_not_healthy	=	"Cannot update _OSNAME_ because the status of the high-availability cluster is not normal."
error_hybrid_ha_passive_bad_model	=	"This file is incompatible with the passive server. Please select a file compatible with your model."
error_hybrid_ha_patch_version_inconsistent	=	"The file version of the active server is inconsistent with that of the passive server. Please make sure the file version is consistent"
error_incompatible_hw_revision	=	"There is an updated _OSNAME_ patch available for your _DISKSTATION_. Please download it from {0}Synology Download Center{1}."
error_memory	=	"Cannot allocate driver buffer. Please reboot and try again."
error_mkfs	=	"Failed to format the disk."
error_model	=	"The model of the update file is incompatible with the system model."
error_nofile	=	"Cannot find the specified upgrade file. Please make sure the path is correct."
error_nopath	=	"You did not enter the path to an upgrade file."
error_notready	=	"The current disks status is not ready for update. Please make sure all disks are in normal status and try again."
error_passive_patch	=	"Cannot update _OSNAME_ on the passive server. Please try again later."
error_patch	=	"Fail to update the file. The file is probably corrupt."
error_patch_codesign	=	"The certificate of the .pat file cannot be verified."
error_read_mod	=	"Unable to recognize the system model."
error_read_patch_mod	=	"Unable to recognize the system model from the upgrade file."
error_read_patch_ver	=	"Unable to recognize the system version from the upgrade file."
error_read_ver	=	"Unable to recognize the current system version."
error_sas_exp_fw_upd_fail	=	"Expansion unit firmware update failed"
error_update_bootflash	=	"Failed to update the boot device. Please contact <a class="link-font" target="_blank" href="https://www.synology.com/company/contact_us">Synology Technical Support</a>."
error_update_remote	=	"Failed to upgrade the passive server. The system will unbind the passive server from the high-availability cluster. Please try to individually upgrade the servers, and then bind the passive server again."
error_update_unknown	=	"Unable to perform this operation. ({0}). Please try again later."
error_updater_prehook_failed	=	"Your system is not compatible with the patch file. Please contact Synology Support for assistance."
error_upgrade_local_volume_abnormal	=	"An error has occurred on a volume on the active server. Please repair it before binding."
error_upgrade_remote_volume_abnormal	=	"An error has occurred on a volume on the passive server. Please repair it before binding."
error_vdsm_host_version_not_match	=	"The current _OSNAME_ version on the host is not compatible with the new Virtual DSM version. Please upgrade _OSNAME_ on the host first."
error_vdsm_host_virt_pkg_version_not_match	=	"The current Virtual Machine Manager version on the host is not compatible with the new Virtual DSM version. Please upgrade Virtual Machine Manager on the host first."
error_vdsm_license_invalid	=	"Your DSM cannot be updated to this version because the upgrade period of your Virtual DSM license has expired. Please choose another version of DSM or map a new Virtual DSM license."
error_vdsm_prepare	=	"An error occurred to Virtual DSM while preparing for the upgrade. Please reboot and try again."
error_verify_patch	=	"This file may have been corrupted. Please redownload the update file (.pat) from Synology Download Center."
error_version	=	"Unable to perform _OSNAME_ update because this _OSNAME_ is an older version."
exp_fw_critical_update_backgroud_desc	=	"Expansion unit firmware"
exp_fw_critical_update_cancel_desc	=	"Note that the service of your expansion unit will not be available until you have completed the update. Once you are ready, go to <b>Control Panel</b> > <b>Update & Restore</b> to execute the expansion unit firmware update."
exp_fw_critical_update_comfirm	=	"I've read and understood the above information."
exp_fw_critical_update_desc	=	"<div style="padding: 0px 0px 4px 0px">We have detected that the firmware of the expansion units need to be updated. To ensure the stability of your system, we recommend updating the firmware immediately. The update will take about {0} minutes.</div><div style="padding: 4px 0px 0px 0px"><p><ul style='padding-left:20px;'><li style='list-style-type:disc;list-style-position:outside'>The expansion units requiring firmware update: <b>{1}</b></li><li style='list-style-type:disc;list-style-position:outside'>The service of your expansion units is temporarily unavailable</li><li style='list-style-type:disc;list-style-position:outside'>Creating new volumes on the expansion units is not allowed</li></ul></p></div>"
exp_fw_critical_update_failed_desc	=	"<div style="padding: 4px 0px; margin-bottom: 4px">The firmware update of expansion units failed unexpectedly. To ensure the stability of your system, the service of your expansion units is temporarily unavailable. Do not try to restart or unplug disks or expansion units. To fix this issue, contact {0}.</div></div><div style="padding: 4px 0px">Update failed expansion units: <b>{1}</b></div>"
exp_fw_critical_update_failed_model_desc	=	"Update failed expansion units: <b>{0}</b>"
exp_fw_critical_update_title	=	"Critical Firmware Update Notice"
exp_fw_ctrl_panel_need_update_desc	=	"Need to update firmware immediately."
exp_fw_ctrl_panel_up_to_date_desc	=	"The firmware of all expansion units is up-to-date."
exp_fw_ctrl_panel_update_desc	=	"To ensure the stability of your system, we highly recommend updating the firmware of your expansion unit immediately."
exp_fw_ctrl_panel_update_failed_desc	=	"Update failed."
exp_fw_ctrl_panel_update_fieldset	=	"Expansion Unit Firmware Update"
exp_fw_ctrl_panel_update_model_desc	=	"The expansion units requiring firmware update: <b>{0}</b>"
exp_fw_ctrl_panel_update_window_desc	=	"This will take about {0} minutes. Do not shut down or restart your system during the update."
exp_fw_ctrl_panel_updating_desc	=	"Updating firmware"
exp_fw_rollback_error_update_desc	=	"<div style="padding: 0px 0px 4px 0px">The firmware of expansion units has been detected as abnormal. To ensure system stability, the service of your expansion units is temporarily unavailable. Please update the firmware again to fix this issue. If the problem persists after update, please contact Synology Technical Support.</div><div style="padding: 4px 0px 0px 0px">The expansion units requiring firmware update: <b>{0}</b></div>"
exp_fw_upd_already_in_progress	=	"Updating SAS expansion firmware. Please wait."
exp_fw_update_finish_notification	=	"Expansion unit firmware update completed"
exp_fw_updating_desc	=	"This will take about {0} minutes. Do not shut down and restart your system during the update."
how_to_continue	=	"Please choose how to proceed:"
initializing_packages	=	"Initializing essential packages"
internal_err	=	"Unknown server error. Please contact <a target="_blank" href="https://www.synology.com/company/contact_us">Synology Technical Support</a>."
license_expire_err	=	"Your _OSNAME_ cannot be updated because your Virtual DSM license has expired. Please contact your system administrator to renew the Virtual DSM license."
load_ha_status	=	"Loading the cluster status"
new_update_setting_window_desc	=	"Synology offers important updates to fix critical security issues and bugs. To ensure that your system is always protected, we highly recommend setting your _DISKSTATION_ to automatically install important updates. Rest assured that we only roll out these important updates when necessary and should not get in your way."
new_update_setting_window_title	=	"Select an update option"
no_expansion_connected	=	"No connected expansion unit"
no_small_fix	=	"You've installed all important updates."
notice_upgrade_message	=	"Do not power off the system during the update"
patch_for_active	=	"Active server patch"
patch_for_model	=	"{0} patch"
patch_for_passive	=	"Passive server patch"
please_click_checkbox_desc	=	"Please read all the information and tick the checkbox to continue."
promotion_desc	=	"{0} offers better user experience along with brand-new features."
setting_checking_schedule	=	"Check schedule"
setting_note_notification_config	=	"You'll receive a notification when a new version is available. Go to {0} to make sure you have notifications set up."
setting_note_update_behavior	=	"The system will always attempt to update to the latest available version."
setting_option_autoupdatetype_hotfix	=	"Automatically install the latest updates"
setting_option_autoupdatetype_hotfix_desc	=	"Automatically keep your system up to date with the latest features and improvements."
setting_option_autoupdatetype_hotfixsecurity	=	"Automatically install important updates"
setting_option_autoupdatetype_hotfixsecurity_desc	=	"Keep your system stable by automatically installing updates that fix security vulnerabilities and other issues."
setting_option_autoupdatetype_notify	=	"Notify me and let me decide whether to install the update"
setting_option_type_auto_install	=	"Automatically install the latest update"
setting_option_type_auto_install_desc	=	"Automatically update to the latest version of _OSNAME_ and experience new features."
setting_option_type_auto_install_security	=	"Automatically install important updates that fixed critical security issues and bugs (Recommended)"
setting_option_type_auto_install_security_desc	=	"System will automatically install the DSM update includes critical security or function repairs to protect your Synology NAS and important data"
setting_option_type_auto_install_security_desc2	=	"Maintain a stable version of _OSNAME_ with automatic updates to fix vulnerabilities and issues."
setting_option_type_desc	=	"Select how to proceed when there is new DSM update available"
setting_option_type_notify_me	=	"Notify me and let me decide whether to install the new update"
setting_update_schedule	=	"Update schedule"
small_update_check_failed	=	"Oops, something went wrong with the update file. Please try again."
small_update_install_failed	=	"Oops, something went wrong while installing the update. Please try again."
status_latest_version_desc	=	"This is the latest version available based on your current DSM configurations."
status_update_available_desc	=	"Available updates may vary depending on your current DSM configurations."
switchover_migratedown	=	"Finishing _OSNAME_ update on {0}. Some services may be interrupted."
swithcover_finish	=	"Finishing system update. Some services may be interrupted."
termofservice_confirm	=	"I have read and agreed to the Synology End User License Agreement"
termofservice_subtitle	=	"To continue updating _OSNAME_, please read and agree to the End User License Agreement."
termofservice_title	=	"Synology End User License Agreement"
timer_unit	=	"seconds"
try_it	=	"Download"
unknown_err	=	"Unknown server error. Please contact <a target="_blank" href="https://www.synology.com/company/contact_us">Synology Technical Support</a>."
update_adv_setting	=	"Update Settings"
update_alert_hardcheck	=	"The following services/tasks are running. Please try again later."
update_alert_hardcheck_title	=	"Unable to Update"
update_all_desc	=	"All the latest updates, including new features, enhancements, and security fixes, will be displayed."
update_btn_download	=	"Download"
update_btn_retry	=	"Try Again"
update_btn_upgrade	=	"Update Now"
update_confirm_continue	=	"I understand and agree to update the system"
update_confirm_manual_upgrade	=	"The installation may take {0} to {1} minutes to finish. Please do not shut down the system during the update. Once the update is complete, the system may restart all the services and packages. Do you want to continue?"
update_confirm_refresh	=	"Update finished! Please click OK to continue."
update_confirm_refresh_need_reboot	=	"Update successfully. Please note that certain changes will take effect only after system restarts."
update_confirm_softcheck	=	"During the update, the following services/tasks will be stopped. Are you sure you want to continue?"
update_confirm_softcheck_title	=	"Attention Required"
update_confirm_upgrade	=	"The installation may take between {0} and {1} minutes. Please do not shut down the system during the update. Once the update is complete, the system will restart all services and packages. Do you want to continue?"
update_confirm_upgrade_ha_none	=	"Please note that the system cannot be powered off while installing this update. The active server will continue to serve during the system update on the passive server. Do you want to continue?"
update_confirm_upgrade_ha_restart_all	=	"Please note that the system cannot be powered off while installing this update. The active server will continue to serve during the system update on the passive server. When the update is finished, all services and packages will be restarted. Do you want to continue?"
update_confirm_upgrade_ha_restart_some	=	"Please note that the system cannot be powered off while installing this update. The active server will continue to serve during the system update on the passive server. When the update is finished, the following services and packages will be restarted. Do you want to continue?"
update_confirm_upgrade_none	=	"Please note the system cannot be powered off when installing this update. Do you want to continue?"
update_confirm_upgrade_reboot_later	=	"When the update is finished, certain changes will take effect only after system restarts."
update_confirm_upgrade_reboot_now	=	"The installation may take between {0} and {1} minutes. The system cannot be shut down during the update and will restart immediately afterward. Do you want to continue?"
update_confirm_upgrade_restart_all	=	"Please note the system cannot be powered off when installing this update. When the update is finished, all services and packages will be restarted. Do you want to continue?"
update_confirm_upgrade_restart_some	=	"Please note the system cannot be powered off when installing this update. When the update is finished, certain services and packages will be restarted. Do you want to continue?"
update_date	=	"_OSNAME_ date"
update_delay_already_set	=	"This option is already operated"
update_delay_discard_dsm_for_nano_desc	=	"The system will not install {0} at this time. However, we recommend updating to {1} as soon as possible, as it includes critical fixes."
update_delay_discard_dsm_for_nano_desc_continue	=	"Continue to update {0}"
update_delay_discard_dsm_for_nano_desc_delay	=	"Postpone and reschedule the update"
update_delay_discard_dsm_for_nano_desc_delay_disable_tip	=	"This update can no longer be postponed."
update_delay_discarded	=	"Update canceled for now."
update_delay_done_msg	=	"The update installation has been postponed."
update_delay_empty_date_msg	=	"Please select a date."
update_delay_error_already_postponed	=	"The update installation has already been postponed."
update_delay_error_expired	=	"The postpone option is no longer valid."
update_delay_error_newer_version_available	=	"Unable to postpone because a new update has been scheduled."
update_delay_note	=	"The available dates are calculated based on your settings in {0}DSM Update{1}."
update_delay_select_date_desc	=	"Select a new date to install the update."
update_delay_select_date_desc2	=	"Select the date when you'd like to install the new version."
update_delay_title	=	"Postpone Update Installation"
update_delay_to	=	"Install on or after this date"
update_delay_to2	=	"Install date"
update_desc1	=	"Synology offers _OSNAME_ updates when new features are available or security issues and bugs are fixed to improve system performance and stability."
update_desc2	=	"Check {0} now for any updates."
update_download_noti_link	=	"Click here to go to _OSNAME_ Update"
update_download_noti_title	=	"_OSNAME_ Download Completed"
update_download_noti_title_err	=	"_OSNAME_ Download Failed"
update_dsm_download	=	"{0} is available for download."
update_dsm_download_cancel	=	"Download canceled."
update_dsm_download_err	=	"Failed to Download _OSNAME_. Please check your Internet connection."
update_dsm_download_important	=	"Important update {0} is available for download."
update_dsm_downloading	=	"Downloading"
update_dsm_manually	=	"Manual _OSNAME_ Update"
update_dsm_need_reboot	=	"A system restart is required to complete the update."
update_dsm_no_new_dsm	=	"Your _OSNAME_ version is up-to-date."
update_dsm_operate_again	=	"Next automatic update: {0}. You can check the schedule in {1}DSM Update{2}."
update_dsm_recommended_dsm_installed	=	"Synology recommended DSM version has been installed, if you'd like to upgrade to latest version please click download button."
update_dsm_release_note	=	"Release notes"
update_dsm_scheduled_on	=	"{2}Auto update{3}: {0} is scheduled to be installed on {1}"
update_dsm_upgrade	=	"{0} is ready to update."
update_dsm_whats_new	=	"What's New"
update_dsm_whats_new_with_question_mark	=	"What's new"
update_error_no_root	=	"Insufficient system capacity for update. Please refer to {0}this article{1} to troubleshoot issues."
update_error_no_vol	=	"Insufficient capacity for update. Please make sure the volume must be in normal condition and has at least {0} MB available."
update_manual_warning_https	=	"Note: Uploading the .pat file via the HTTPS protocol might cause the upload process to fail. It is recommended that you connect to _OSNAME_ via the HTTP protocol before uploading the .pat file."
update_noti_need_reboot	=	"A system restart is required to complete the update."
update_notice	=	"<font class="note-font">Note:</font> _OSNAME_ cannot be rolled back to an older version. The applied _OSNAME_ must be newer than the current one."
update_notice_manual	=	"Please select the .pat file from your local computer."
update_notice_title	=	"Update Notice"
update_process	=	"Please don't start any operations before the update is completed. Note that the process will take longer after reaching 75%, please wait patiently for it to complete."
update_progress	=	"Update Progress"
update_progress_prepared	=	"Preparing"
update_schedule_changed	=	"The schedule to install {0} has been changed."
update_schedule_changed_no_upcoming	=	"The schedule to install {0} has been changed. No further updates are scheduled at this time."
update_security	=	"Check important and security updates of _OSNAME_ only"
update_security_desc	=	"Only the important and security updates of your current _OSNAME_ version will be displayed."
update_title	=	"_OSNAME_ Update"
update_uploading	=	"Uploading file. Please wait..."
update_version	=	"Current _OSNAME_ version"
update_website	=	"Synology Website"
updatemask_desc	=	"Please refresh this page in a short moment."
updatemask_title	=	"The system is being upgraded."
updating	=	"Updating"
updating_progress_desc	=	"This will take about {0} minutes. Please wait."
updating_progress_title	=	"Updating _OSNAME_ on your _DISKSTATION_"
upgrade_all	=	"Check the latest _OSNAME_ updates"
upgrade_all_desc_note	=	"Only the latest _OSNAME_ version will be displayed if multiple updates are available."
upgrade_alz	=	"Verifying installation file"
upgrade_cfg	=	"Updating configurations"
upgrade_confirm	=	"Are you sure you want to update the system?"
upgrade_local_alz	=	"Analyzing active server"
upgrade_local_cfg	=	"Updating active server configurations"
upgrade_local_prg	=	"Updating active server programs"
upgrade_prg	=	"Updating programs"
upgrade_reb	=	"Rebooting"
upgrade_remote	=	"Updating passive server"
upgrade_remote_without_reboot	=	"Updating passive server. Active server is still in service."
upgrade_service	=	"Restarting services"
upgrade_success	=	"Update completed"
upgrade_title	=	"Upgrading Process Status"
upload_err_deny	=	"Permission denied."
upload_err_no_space	=	"The available disk space of the system is insufficient."
upload_err_quota	=	"Your personal data has exceeded the quota."
version	=	"Version"
wait_remote_upgrade	=	"Updating _OSNAME_ on {0}"
waiting_reboot	=	"Restarting your _DISKSTATION_"
waiting_reboot_desc	=	"Please do not power off during this process."

[updater]
exp_fw_need_update_softcheck_desc	=	"<p><b>Firmware update notice:</b></p>The latest SAS controller firmware is included in this DSM update. Make sure all the expansion units are connected before updating. This update will take longer than regular DSM updates."

[upgrade_mask_7]
check_status_title	=	"Getting ready..."
pgsql_timeout_desc	=	"It takes longer than expected to update the system database. Package updates will start after the system database update is complete. You can sign in to _OSNAME_ now, and the updates will continue in the background."
pgsql_timeout_title	=	"Still working..."
pgsql_upgrade_desc	=	"System database update is in progress. It takes about 15 minutes to complete."
pgsql_upgrade_title	=	"Getting ready... ({percentage}%)"
photos_migrating_moments_personal	=	"Upgrading Configurations... ({current}/{total})"
photos_migrating_moments_shared	=	"Migrating Shared Photo Library from Synology Moments... ({current}/{total})"
photos_migrating_photostation	=	"Upgrading Database... ({current}/{total})"
photos_migrating_photostation_personal	=	"Migrating Personal Photo Station albums... ({current}/{total})"
photos_upgrade_desc	=	"The migration to Synology Photos is currently ongoing. This is the last step before all update tasks are complete. You can sign in to _OSNAME_ now. All photos and videos will be available in Synology Photos after the migration is complete."
photos_upgrade_title	=	"Updating Synology Photos Database.."
pkg_prepare_title	=	"Starting to update packages..."
pkg_repairing_desc	=	"Package update may take some time. You can sign in to _OSNAME_ now, and the updates will continue in the background."
pkg_repairing_title	=	"Updating {package_name}... ({current}/{total})"
sign_in_anyway	=	"Sign in to _OSNAME_ now"

[upload]
empty_input_file	=	"Please open the file to create."
files_selected	=	"Selected {0} file(s)"
no_folder_upload_action	=	"You cannot upload folders."
upload_error_data	=	"Failed to upload file(s)."
upload_error_timeout	=	"Data transmission time-out. Please try again later."
upload_exceed_maximum_filesize	=	"The size of following file(s) exceeds 2GB"
upload_folder_error	=	"Folders or 0KB files will not be uploaded. To upload these items, please go to <b>Settings</b> and tick <b>Browse files from local computer with File Station</b>."
upload_nofile	=	"File not found."
upload_open_file	=	"select files for upload"
wrong_files_format	=	"The format of {0} file(s) is invalid."

[ups]
battery_notification	=	"Estimated battery time: %REMAIN_TIME% %REMAIN_TIME_UNIT%."
get_info_failed	=	"Failed to obtain UPS information. Please check whether your network connection, power supply, and UPS are working properly."
networkups_desc	=	"Permitted _DISKSTATION_ Devices"
networkups_enable	=	"Enable network UPS server"
networkups_noconn	=	"Cannot connect to the network UPS server."
networkups_select_hint	=	"No USB UPS connected."
networkups_type_choose	=	"Network UPS type"
networkups_type_snmp	=	"SNMP UPS"
networkups_type_syno	=	"Synology UPS server"
operation_failed	=	"Unable to perform this operation. Please check if your network connection, power supply, and UPS are working properly, and try again."
set_info_failed	=	"Failed to configure UPS settings. Please check whether your network connection, power supply, and UPS are working properly."
snmp_switch_to_synoups_hint	=	"Already connected to SNMP UPS. Switching to Synology UPS will disconnect the SNMP UPS."
snmpups_community	=	"SNMP community"
snmpups_ip	=	"SNMP UPS IP address"
snmpups_version	=	"SNMP version"
synoups_switch_to_snmp_hint	=	"Already connected to Synology UPS. Switching to SNMP UPS will disconnect the Synology UPS."
ups_connect_failed	=	"Failed to connect to the network UPS server. Please check the server settings."
ups_connected	=	"Connected"
ups_desc	=	"Connecting a UPS can prevent data loss when there is a power failure."
ups_disable_network_ups_hint	=	"Please connect a USB UPS and disable SNMP UPS or Synology UPS."
ups_no_allowed_ip_msg	=	"Please set the permitted _DISKSTATION_."
ups_not_connected	=	"Not connected"
ups_safemode_customize_time	=	"Customize time"
ups_safemode_immediately	=	"Immediately"
ups_safemode_same_as_server	=	"Same as server"
ups_safemode_shutdown	=	"Shut down UPS when the system enters Standby Mode"
ups_safemode_timing	=	"Timing for _DISKSTATION_ to enter Standby Mode"
ups_safemode_tips	=	"In Standby Mode, all services are stopped and volumes are unmounted to prevent data loss. _DISKSTATION_ will be powered off safely before the UPS device runs out of power."
ups_safemode_until_lowbatt	=	"Until low battery"
ups_shutdown_tips	=	"The UPS power-off function varies by brand and model. Please simulate a power outage to ensure the function performs as expected. Please refer to the help article for details."
ups_status	=	"UPS Status"
ups_type	=	"UPS type"
ups_type_tips	=	"<p>USB UPS</p><p>A backup power device that connects to your Synology product via a USB port.</p><p></br></p><p>SNMP UPS</p><p>A backup power device that connects to your Synology product through SNMP.</p><p></br></p><p>Synology UPS Server</p><p>A Synology UPS Server is another Synology product which is connected to a USB or SNMP UPS. This Synology product will obtain information about the UPS from the server.</p>"
ups_wait_time_desc	=	"Time before _DISKSTATION_ enters Standby Mode"
upsmon_server	=	"Network UPS server IP"
usb_noups	=	"No UPS is connected."
usb_ups	=	"USB UPS"
usb_ups_charge	=	"Battery Charged"
usb_ups_connect	=	"UPS has been connected. You can enable UPS support."
usb_ups_desc2	=	"<p>System will automatically save all user data and switch to Standby Mode after specified time.</p><p>Under Standby Mode, system will stop all services and cannot be accessed.</p>"
usb_ups_enable	=	"Enable UPS support"
usb_ups_load	=	"Load"
usb_ups_manufacture	=	"Manufacturer"
usb_ups_model	=	"Model"
usb_ups_runtime	=	"Estimated Battery Time"
usb_ups_status	=	"Status"
usb_ups_status_battery	=	"On Battery"
usb_ups_status_low_batt	=	"Low Battery"
usb_ups_status_off	=	"Off"
usb_ups_status_online	=	"Connected"
usb_ups_status_title	=	"Device Information"
usb_ups_title	=	"UPS (Uninterruptible Power Supply)"
usb_ups_wrong_time	=	"Please enter an integer."
usbups_select_hint	=	"USB UPS connected. Please select USB UPS."

[usb]
access_desc_router	=	"File explorer (via LAN only)"
access_from_dsfile_router	=	"Mobile device"
access_from_internet_router	=	"Web browser"
access_in_lan_router	=	"Access external storage devices via the following three methods:"
apply_delalloc_warning	=	"ext4 external devices will be remounted and all services on the devices will be stopped during this period."
delalloc_desc	=	"Enabling delayed allocation for ext4 can improve write performance, but might result in data loss if power failure occurs or external devices are improperly unmounted."
delalloc_opt	=	"Enable delayed allocation for ext4"
exfat_pkg_unmount_share_warning	=	"Detected an attached exFAT external device. Please eject the device before installing or updating the exFAT package."
file_browser_router	=	"File browser"
fit_to_page	=	"Enable fit-to-page"
forbid_confirm_reboot	=	"A restart is required for the USB prohibiting setting to take effect."
forbid_usb	=	"Prohibit the use of USB port"
forbid_usb_explain	=	"Prohibiting the use of USB port will block all types of USB devices."
format_disk_confirm	=	"Are you sure you want to continue?"
info	=	"Information"
info_not_found	=	"Not detected"
launch_filestation_router	=	"Launch File Station in _OSNAME_"
net_prntr	=	"Network Printer"
net_prntr_add	=	"Add Network Printer"
net_prntr_bjnp	=	"BJNP"
net_prntr_conf	=	"Configurations"
net_prntr_detail	=	"Enter network printer details"
net_prntr_enter_info	=	"Please confirm the settings of your printer below."
net_prntr_enter_ip	=	"Please enter the IP address of your network printer."
net_prntr_intro	=	"This wizard guides you through the steps of setting up a network printer and sharing it with _DISKSTATION_."
net_prntr_ip_exist_error	=	"The IP address you entered is already used by another network printer. Please enter another one."
net_prntr_ip_exist_unknown	=	"Failed to determine if the network printer could be used. Please try again later."
net_prntr_ipp	=	"IPP"
net_prntr_lpr	=	"LPR"
net_prntr_mdl	=	"Printer Model"
net_prntr_name	=	"Printer Name"
net_prntr_name_exist_error	=	"The printer name you entered is reserved or already used. Please enter another name."
net_prntr_ptl	=	"Protocol"
net_prntr_qname	=	"Queue Name"
net_prntr_set_func	=	"Please set up the cloud printing options for the network printer."
net_prntr_socket	=	"Socket"
net_prntr_welcome	=	"Welcome to the Network Printer Setup Wizard"
net_prntr_wizard_title	=	"Network Printer Setup Wizard"
net_qname_tip	=	"Please consult your printer's user manual or contact the manufacturer."
prntr_ap_gcp_setting	=	"Apple Wireless Printing Settings"
prntr_device	=	"Printer"
prntr_mgr	=	"Printer Manager"
usb_FStype	=	"File system type"
usb_backingup	=	"The system is backing up to the USB disk. Do not remove the USB disk until the process is completed."
usb_btnformat	=	"Format"
usb_btnformat_router	=	"Format"
usb_clean	=	"Clean"
usb_cleannote	=	"Clean up spool space"
usb_cleanwarn	=	"Are you sure to clean up spool space?"
usb_data_backup	=	"Backup - for data backup"
usb_data_share	=	"Storage - for data sharing"
usb_devname	=	"Device"
usb_disk_name	=	"USB disk name"
usb_eject	=	"Eject"
usb_ejectnote	=	"Please press [{0}] button first and then remove devices."
usb_ejectwarn	=	"Are you sure you want to eject this device?"
usb_exfat	=	"EXFAT"
usb_exfat_fat32_descr	=	"FAT32 and EXFAT formats can be used on both Windows and Mac. However, the created files cannot contain the following characters in the file name: <font class='red-status'> \ / : * ? " < > | </font>."
usb_exfat_not_supported	=	"exFAT file system is not supported. Please install exFAT Access from Package Center to access this storage device."
usb_fat32	=	"FAT32"
usb_fat32_descr	=	"FAT32 format can be used on both Windows and Mac. However, the created files cannot contain the following characters in the file name: <font class='red-status'> \ / : * ? " < > | </font>."
usb_format_err	=	"The system failed to format the USB disk. Please make sure the USB disk is properly connected to the system, and its write protection is off. Please remove the USB disk and then plug in to try again."
usb_format_fat_size_warning	=	"Warning: Formatting "{0}" with fat failed since its size is bigger than 2TB!"
usb_format_following_disk	=	"The wizard will guide you through the steps to format the following disk. Click Next to continue."
usb_format_size_warning	=	"Warning: Formatting "{0}" with EXT3/EXT4 failed since its size is less than 100MB!"
usb_format_wizard_final_title	=	"Formatting disk"
usb_format_wizard_fs_type	=	"File system type"
usb_format_wizard_purpose	=	"Select the purpose of the USB disk"
usb_format_wizard_welcome_title	=	"Welcome to Disk Format Wizard"
usb_formatting	=	"Please do not shut down the system before this process completes."
usb_formatwarn_noshare	=	"Warning: Formatting disk will delete all data on "{0}"."
usb_fs_builtin	=	"Native"
usb_fs_fat	=	"FAT"
usb_fs_ntfs	=	"NTFS"
usb_fs_other	=	"&lt;Not Supported&gt;"
usb_fsck	=	"The system is checking USB disk. Do not remove the disk drive until the process is completed."
usb_handlefail	=	"The USB disk has some problems while accessing it. Please make sure it is well-plugged, or consult the disk manufacturer."
usb_hibernation	=	"Disk Hibernation"
usb_inactive_disk	=	"&lt;Inactive Backup Disk&gt;"
usb_init	=	"The system is performing USB disk initialization. Do not remove the disk drive until the process is completed. "
usb_install_exfat_link	=	"Install exFAT"
usb_manager	=	"USB Disk Manager"
usb_manager_format	=	"Disk Format Wizard"
usb_mount_fail	=	"&lt;Mount Failed&gt;"
usb_native	=	"Native format"
usb_native_descr	=	"Native format offers better data protection and higher performance."
usb_needfsck	=	"The system detects inconsistency in your USB disk. Please bring the USB disk to your nearby PC and perform a file system checking/repairing."
usb_nodisk	=	"No USB disk is connected."
usb_non_admin_eject	=	"Allow non-admin users to eject USB devices"
usb_non_admin_eject_explain	=	"Enabling this option allows non-admin users to eject USB devices via the icon on the taskbar."
usb_noprint	=	"No USB printer is connected."
usb_notmounted	=	"&lt;Not Shared&gt;"
usb_print_test_page	=	"Print Test Page"
usb_printer	=	"You can connect to the printer through the network."
usb_printer_advance_print_title	=	"Advanced Settings"
usb_printer_airprint	=	"Apple Wireless Printing"
usb_printer_airprint_enable	=	"Enable Apple Wireless Printing"
usb_printer_airprint_notice	=	"Enabling this option will also enable {0}.  Are you sure you want to continue?"
usb_printer_brand	=	"Printer brand"
usb_printer_command_set	=	"Command set"
usb_printer_driver	=	"Printer driver"
usb_printer_driver_fail	=	"Fail to download and install the driver."
usb_printer_driver_loading	=	"Getting driver list from Synology..."
usb_printer_driver_loading_fail	=	"Failed to get driver list from Synology. Please check your Internet connection."
usb_printer_driver_nodisk	=	"Connect a USB storage device to the USB port of your USB Station 2 to enable this feature. Please refer to Help for more information."
usb_printer_driver_update	=	"Update driver"
usb_printer_gcp	=	"Google Cloud Print"
usb_printer_gcp_enable	=	"Enable Google Cloud Print"
usb_printer_gcp_enable_warning	=	"You have not yet set up Google Cloud Print. Please go to the Google Cloud Print page to set up first."
usb_printer_gcp_info_account	=	"Email"
usb_printer_gcp_info_manager_server_link	=	"Go to {0}Google Cloud Print{1} to manage your printers and print jobs."
usb_printer_gcp_info_pass	=	"Password"
usb_printer_gcp_info_set_title	=	"Google Account Login"
usb_printer_gcp_warning_msg	=	"Please sign in to your Google account again to continue using Google Cloud Print due to the change of Google's security mechanism."
usb_printer_info	=	"USB Printer Info"
usb_printer_lpr	=	"Network Printer"
usb_printer_lpr_desc	=	"Use print function only"
usb_printer_lpr_mode	=	"Network Printer Mode"
usb_printer_lpr_prefer_desc	=	"Use print function only"
usb_printer_lpr_prefer_title	=	"Network Printer"
usb_printer_lpr_printing	=	"Printing"
usb_printer_mode	=	"Mode"
usb_printer_not_support_notification	=	"USB printers are not supported on this model."
usb_printer_usbip	=	"Network MFP"
usb_printer_usbip_atimer	=	"Auto lock timeout (sec)"
usb_printer_usbip_desc	=	"Use print/scan/fax functions"
usb_printer_usbip_free	=	"Available"
usb_printer_usbip_lock	=	"Attach Scan/Fax"
usb_printer_usbip_lockby	=	"Device is attached to {0}."
usb_printer_usbip_mtimer	=	"Manual lock timeout (sec)"
usb_printer_usbip_prefer_desc	=	"Use print/scan/fax functions"
usb_printer_usbip_prefer_title	=	"Network MFP"
usb_printer_usbip_release	=	"The printer will become available to other users. Are you sure you want to continue?"
usb_printer_usbip_release_lock	=	"Release printer"
usb_printer_usbip_release_lock_warning	=	"User's connection to the printer will be released. Are you sure to continue?"
usb_printer_usbip_setup	=	"Set Up Printer"
usb_printer_usbip_timeout_setup	=	"Timeout Setup"
usb_printer_wait_queue	=	"Waiting queue"
usb_printmgr	=	"USB Printer Manager"
usb_producer	=	"Manufacturer"
usb_productname	=	"Product"
usb_select	=	"Select the USB disk you want to manage. You can access the automatically created shared folder on the USB disk when it's plugged in."
usb_shname	=	"Shared folder"
usb_size	=	"Used/Total Size"
usb_st_backingup	=	"Backing up..."
usb_st_fail	=	"Crashed"
usb_st_format	=	"Formatting..."
usb_st_formatfail	=	"Failed to format."
usb_st_fsck	=	"Checking..."
usb_st_init	=	"Initializing..."
usb_st_needfsck	=	"In-correct"
usb_st_normal	=	"Normal"
usb_st_normal_part_exceed	=	"Normal - displayable up to 16 partitions"
usb_st_usbcopy	=	"Copying..."
usb_status	=	"Status"
usb_storage_partition_fs_router	=	"File System"
usb_storage_router	=	"Storage"
usb_storage_usage_router	=	"Usage"
usb_summary_desc	=	"The wizard will apply the following settings. The process will depend on your disk size. Please do not shut down the system before this process completes."
usb_summary_purpose	=	"Purpose"
usb_type	=	"Type"
usb_type_1_1	=	"USB 1.1"
usb_type_2_0	=	"USB 2.0"
usb_type_3_0	=	"USB 3.0"
usb_type_audio	=	"USB Audio"
usb_type_hub	=	"USB Hub"
usb_type_remote_control	=	"USB Remote Control"
usb_type_scard	=	"USB card reader"
usb_type_unknown	=	"&lt;Unknown&gt;"
usb_usbcopying	=	"Copying files from USB disk to local disk..."
web_browser_router	=	"Web browser"

[usbbackup]
backup_disk	=	"Backup Disk"
usbbackup_settings	=	"Backup Settings"
usbbkp_all_local_shares	=	"All local shared folders"
usbbkp_backup	=	"Immediate Backup"
usbbkp_backup_shares	=	"Shared folders to backup"
usbbkp_backuping	=	"Performing a backup"
usbbkp_backuping_full	=	"Performing a full backup"
usbbkp_backuping_incr	=	"Performing an incremental backup"
usbbkp_cancel	=	"Canceled"
usbbkp_cfrm_backup	=	"Are you sure you want to start the backup?"
usbbkp_cfrm_cancel	=	"Are you sure to cancel the backup procedure?"
usbbkp_cfrm_inactive	=	"Already having an on-line backup disk. This disk will be inactive after formatting. If you remove the current on-line disk, this disk will become on-line instead."
usbbkp_cfrm_less_space_backup	=	"The backup disk capacity is less than the local disk. However, we can still perform the backup procedure but data may be over the backup disk capacity in the future. Do you want to continue?"
usbbkp_checking_size	=	"Checking disk size"
usbbkp_day	=	"day(s)"
usbbkp_diskinfo	=	"Disk status"
usbbkp_elapsed	=	"Elapsed time"
usbbkp_err_cancel	=	"User canceled the backup procedure."
usbbkp_err_error	=	"Failed. Please refer to logs for details."
usbbkp_err_no_folder	=	"No available shared folder for backup."
usbbkp_err_succeed	=	"The backup procedure has been completed successfully."
usbbkp_error	=	"Failed"
usbbkp_estimated	=	"Estimated time remaining"
usbbkp_every_fri	=	"Every Friday"
usbbkp_every_mon	=	"Every Monday"
usbbkp_every_sat	=	"Every Saturday"
usbbkp_every_sun	=	"Every Sunday"
usbbkp_every_thu	=	"Every Thursday"
usbbkp_every_tue	=	"Every Tuesday"
usbbkp_every_wed	=	"Every Wednesday"
usbbkp_everyday	=	"Everyday"
usbbkp_format	=	"Formatting..."
usbbkp_hour	=	"hour(s)"
usbbkp_init	=	"Initializing…"
usbbkp_lastresult	=	"Last backup result"
usbbkp_lasttime	=	"Last backup time"
usbbkp_minute	=	"minute(s)"
usbbkp_never	=	"Never"
usbbkp_no_backup	=	"No backup procedure is in progress"
usbbkp_no_share	=	"Please select at least one shared folder."
usbbkp_no_space	=	"The backup disk capacity is not enough to back up local data."
usbbkp_offline	=	"Off-line"
usbbkp_online	=	"On-line"
usbbkp_progress	=	"Progress"
usbbkp_record	=	"Backup record"
usbbkp_schedule	=	"Scheduled Backup"
usbbkp_schedule_backup	=	"Scheduled Backup"
usbbkp_schedule_desc1	=	"Set up a backup schedule"
usbbkp_schedule_set	=	"Scheduled"
usbbkp_second	=	"second(s)"
usbbkp_select_all	=	"All"
usbbkp_select_all_shares	=	"All shared folders"
usbbkp_select_backup_shares	=	"Select shared folders"
usbbkp_select_individual_shares	=	"Select shared folders individually"
usbbkp_select_none	=	"Cancel"
usbbkp_setting_discard_cfrm	=	"Settings are not saved. Are you sure you want to continue? "
usbbkp_start	=	"Scheduled time"
usbbkp_status	=	"Backup status"
usbbkp_status_desc1	=	"To replicate all data from local to a backup disk."
usbbkp_status_desc2	=	"You can back it up manually or set up a schedule at a specific time for automatically backing up."
usbbkp_status_desc3	=	"You can select the shared folders you want to back up manually."
usbbkp_stop_bkp	=	"Stop Immediate Backup"
usbbkp_succeed	=	"Success"
usbbkp_target	=	"Target shared folder"
usbbkp_warn_cancel	=	"Next backup will be a full backup."
usbbkp_warn_not_ready	=	"The disk is not ready for backing up now. Please wait..."
usbbkp_warn_offline	=	"Backup can only proceed with a backup disk connected. Please make sure a disk is attached and is formatted for backup purposes."

[usbcopyset]
sd_selectfolder	=	"SDCopy allows you to copy data from the SD card reader to the _DISKSTATION_ with one-touch of the Copy button on the front panel."
sdcopy_enable	=	"Enable SDCopy"
usb_selectfolder	=	"USBCopy allows you to copy data from the USB device to the _DISKSTATION_ with one-touch of the Copy button on the front panel."
usbcopy_enable	=	"Enable USBCopy"

[user]
acnt_desc	=	"Description"
acnt_list	=	"User List"
acnt_name	=	"Name"
acnt_setup	=	"User Setup"
acnt_used_cap	=	"Used Capacity"
agree_set_must_chg_pwd	=	"Force all users to change password at the next logon"
apply_set_must_chg_pwd	=	"Change"
change_password	=	"Change Password"
change_password_title	=	"Change the password for {0}"
checking_user	=	"Checking user name..."
confirm_quota_update	=	"You are setting quota on a volume that has data deduplication enabled. After you set the quota, the system needs to recalculate the size of this volume. Do you want to continue?"
confirm_set_must_chg_pwd	=	"Changes to password strength rules are applied. Do you want to force all users, including administrators and the current user, to change password at the next logon?"
copy_user	=	"Copy user"
create_user_notification_mail	=	"Send a notification mail to the newly created user"
deleting_user	=	"Deleting..."
device_name	=	"Device name"
disable_admin_tip	=	"For security reasons, we recommend deactivating the default "admin". Learn more about what packages/services will be affected in <a class="link-font" href="https://www.synology.com/knowledgebase/DSM/tutorial/Management/services_affected_by_disable_admin" target="_blank">this article</a>."
edit_adminquota	=	"Quota is unlimited because {0} belongs to the administrators group."
edit_quota_latter	=	"Unable to load quota information. Please create a user before editing the user's quota."
email_desc	=	"We will send a message to this email account when you forget your password or cannot sign in to _OSNAME_. If you are unable to change this email, please contact the system administrator."
email_sns_unknown	=	"Unknown status. Please check your network connection."
empty_email	=	"Email should be entered if you want to send a notification mail to the newly created user"
enable_background_vfx	=	"Enable background visual effect"
enable_background_vfx_desc	=	"Enable the background visual effect to make your _OSNAME_ more fancy."
enable_quota	=	"Enable quota"
error_bad_nas_account	=	"The name is invalid or contains invalid characters."
error_badmail	=	"Incorrect email address format."
error_badname	=	"The user name is invalid or it contains invalid characters."
error_cannot_rename_admin	=	"The default "admin" account cannot be renamed."
error_cntapymtl_usr	=	"You can not apply multiple users at the same time."
error_cntapyno_usr	=	"Please select one user first."
error_dbpw	=	"The password you have entered contains invalid characters, please refer to Help for more information and enter a new one."
error_desc	=	"The description exceeded the system limit of 64 Unicode characters"
error_disable_admin	=	"Failed to deactivate the account. There should be at least one valid administrator in the system."
error_dont_use_admin	=	"For security reasons, please use an account name other than "{0}"."
error_exist	=	"This username already exists"
error_group	=	"The group name does not exist"
error_home_is_moving	=	"The user homes folder is being moved. Please wait for the folder to finish moving and try again."
error_invalid_device_name	=	"The device name must begin with a letter, and can include letters, numbers, underscores, or dashes."
error_nameused	=	"The user name already exists or is reserved for system use only. Please enter a different one."
error_no_device_name	=	"Enter a device name"
error_no_file	=	"Please select a valid file."
error_no_nas_account	=	"Enter administrator account"
error_noname	=	"No user name was entered."
error_privilege	=	"You do not have sufficient permission to import this user"
error_pwd_maxlen	=	"The password should be limited to 127 displayable characters"
error_quota_set	=	"Invalid quota size"
error_repswd	=	"Failed to confirm password. Please enter it again."
error_rmvcur	=	"You can not delete the current login user."
error_rmvdef	=	"You can not remove the default user."
error_rmvempty	=	"Please select a user."
error_rmvnone_usr	=	"You did not select any users to remove."
error_status_nameused	=	"Unable to import user because this username already exists or is reserved for system use only"
error_too_much_user	=	"You have reached the maximum limit of {0} user accounts"
error_toomanyur	=	"The amount of users cannot exceed {0}."
error_user_invalid	=	"Invalid user name"
error_user_repeat	=	"Duplicated accounts were found in the list"
export_confirm_desc	=	"This process may take 5 to 10 minutes. Please wait and do not close the <b>Control Panel</b> window or refresh the browser until the process is finished."
failed_load_user	=	"Failed to load the user data."
first_time_login_change_passwd	=	"Force password change for imported users upon initial login"
ftp_anonymous_user	=	"Anonymous FTP/WebDAV"
group_quota_limit	=	"Group Quota"
home_enable_failed	=	"Failed to enable user home service."
home_volume_change	=	"Local, domain, and LDAP user homes will be moved to a new volume."
home_volume_crash	=	"The volume of user home directory is crash. Please repair the volume, or delete the "homes" shared folder and restart User Home service."
home_volume_expanding	=	"The volume of user home directory is expanding. If you need to move user home directory, please try again later."
home_volume_processing	=	"The volume where home folders are located has ongoing tasks, making home service temporarily unavailable. Go to Storage Manager > Storage to check the progress."
homes_not_found	=	"User home share folder is missing, please restart the service."
homes_tooltip	=	"Enabling this option automatically creates a "home" folder for each user. All users' personal folders are named "home", and are located within the "homes" folder."
invalid_syntax_double_quote_in_middle	=	"Invalid syntax in file. Double quotation marks placed incorrectly. Please check the below field:<br>{0}"
invalid_syntax_enclosed_trailing	=	"Invalid syntax in file. Extra text found after double quotation marks. Please check the below field:<br>{0}"
invalid_syntax_not_double_quote_ending	=	"Invalid syntax in file. Missing double quotation marks at the end of a field. Please check the below field:<br>{0}"
invitation_mail_sent_notification	=	"Notification mail sent."
join_never_expired_list	=	"Add to List of always valid passwords"
location_of_homes	=	"Location of homes"
lock_setting	=	"Settings cannot be changed."
nas_account	=	"Administrator account"
newuser_dlgtitle	=	"Create user"
no_mail	=	"Please enter an email address."
no_such_user	=	"The user doesn't exist."
passwd_never_expire	=	"Password is always valid"
passwd_never_expire_disabled	=	"Password is always valid if the password expiration is enabled"
passwd_strength_desc	=	"Please refer to {0}this article{1} for more information on how to enhance password strength."
password_last_change	=	"Last changed:"
password_reset_link_expire_description	=	"The password reset link in the mail is time-limited."
previous_password_reset_link_invalid_description	=	"Once the mail is resent, all previous password reset links will become invalid."
pwd_no_change	=	"Password has not been changed."
quota_unconstrained_by_group	=	"You may specify User quota for individual volume or folder; otherwise, Group quota will be applied."
quota_unit	=	"Unit"
quota_vol_crash	=	"Crashed"
resend_invitation_mail	=	"Resend Notification Mail"
reset_otp_failed	=	"Failed to disable 2-factor authentication for this user."
reset_otp_success	=	"2-factor authentication has been disabled for this user."
reset_user_otp	=	"Disable 2-factor Authentication"
reset_user_otp_confirm	=	"This will remove the extra security on this account and the user will be able to sign in without the second verification step. Are you sure you want to continue?"
search_user	=	"Search"
select_users	=	"Select users"
send_plain_information	=	"Exclude both reset link and password"
send_time_limited_password_reset_link	=	"Include a password reset link"
send_user_password	=	"Include the user's password"
social_account	=	"Social Network"
social_account_desc	=	"Sign into social networks here to get more services."
tabpanel_user_groups	=	"User Groups"
user_2fa_disabled	=	"Disabled"
user_2fa_enabled	=	"Enabled"
user_2fa_status	=	"2FA Status"
user_account	=	"Name"
user_account_disable	=	"Deactivate this account"
user_acnt_disabled	=	"Deactivated"
user_acnt_expired	=	"Expired"
user_acnt_expired_date	=	"Expires on "
user_acnt_info	=	"User information"
user_acnt_locked	=	"Locked"
user_acnt_mustchange	=	"Password change required"
user_acnt_normal	=	"Normal"
user_acnt_not_activated	=	"Password pending"
user_acnt_status	=	"Status"
user_acnt_unknow_status	=	"Unknown status"
user_application	=	"Applications"
user_cfrmrmv	=	"Are you sure you want to delete the following users?"
user_cfrmrmv_num	=	"Are you sure you want to delete these {0} users?"
user_check_overwrite	=	"Overwrite duplicate accounts"
user_chpasswd_disallow	=	"Disallow the user to change account password"
user_chroot_warning	=	"If this service is disabled, user home cannot be assigned as FTP user root directory."
user_cntrmvdefuser	=	"The system default account cannot be deleted."
user_company	=	"Company"
user_datepassed	=	"You cannot select an expiration date prior to today. Please select another date again."
user_delete	=	"Remove User"
user_delete_confirm	=	"I understand the user's home folder will be permanently removed and cannot be recovered."
user_department	=	"Department"
user_disable_date	=	"After:"
user_disable_immediately	=	"Immediately"
user_email	=	"Email"
user_expired_date	=	"Expired date"
user_export	=	"Export"
user_file	=	"File"
user_file_empty	=	"The list is empty."
user_file_icon	=	"Import users"
user_file_not_utf8	=	"File encoding must be saved as UTF-8."
user_file_open_fail	=	"Failed to open the file. Please check if the file is damaged."
user_file_upload_fail	=	"Failed to upload the file. Please check your network connection."
user_fullname	=	"Description"
user_groups	=	"User groups"
user_guest_lmb_warn	=	"<font color="red">Note: You cannot deactivate guest account or edit its password when Local Master Browser is enabled.</font>"
user_home	=	"User home"
user_home_domain_user_include	=	"Include domain users"
user_home_enable	=	"Enable user home service"
user_home_set	=	"User Home"
user_import	=	"Import users"
user_info	=	"Info"
user_list	=	"Choose the file to upload"
user_lockout	=	"Lockout"
user_never_expire_list_desc	=	"You can edit users without an expiration date via Control Panel > User."
user_office	=	"Office"
user_overwrite	=	"Overwritten"
user_passwd	=	"Password"
user_passwd_current	=	"Current Password"
user_passwd_new	=	"New Password"
user_pwd_expired	=	"Password expired"
user_quota_calculating	=	"The shared folder size will be available after the scanning is complete. Go to Storage Manager to check the progress."
user_quota_capacity	=	"Quota"
user_quota_dedupe	=	"Once data deduplication is enabled for this volume, user quota will be disabled."
user_quota_limit_max_vol	=	"The specified quota exceeds the total volume size of {0}: {1} GB"
user_quota_limit_min	=	"The user quota must be larger than 0 GB."
user_quota_limit_to	=	"Limit to"
user_quota_no_limit	=	"No limit"
user_quota_nolimit	=	"No Limit"
user_quota_preview	=	"Effective Quota"
user_quota_set_fail	=	"The user quota exceeds the free space available on the volume."
user_quota_syntax_err	=	"Please enter an integer."
user_quota_unsupported	=	"Quota setting for this shared folder is not supported on this device."
user_quota_zero_limit	=	"(0 means unlimited.)"
user_repswd	=	"Confirm password"
user_rm_home_warning	=	"When the account is deleted, the user's home folders would be deleted simultaneously. "
user_save_app_privilege_setting	=	"Save Setting"
user_select_tip	=	"Please select users:"
user_set_fail	=	"Failed to setup user accounts"
user_share_permission	=	"Shared Folder Permissions"
user_telephone	=	"Telephone"
user_timepolicy_enable	=	"Enable used time policy"
user_tip1	=	"Create a new user and set password for it."
user_title	=	"Title"
user_unnamed	=	"unnamed"
user_upload	=	"Upload file"
user_upload_no_volume	=	"There is no volume in your system. Please go to <b>Storage Manager</b> and create a new volume."
user_volume	=	"Volume"
user_warning_disallow_change_passwd	=	"You are allowed to edit all information except the password."
valid_duration	=	"The link expires in"
warn_cfrmchg	=	"Are you sure you want to modify this user?"
warning_move_share_decrypted	=	"Please unmount the shared folder "homes" first before changing its location."
warning_status_share_encrypted	=	"User home service has been stopped because the shared folder "homes" is unmounted."

[user_data_collection]
data_collection	=	"Device Analytics"
depend	=	"{0} is dependent on this function. Please uninstall {0} first before disabling this function."
desc	=	"To make improvements to your device and usage experience, Synology would like to collect data regarding how you use your Synology product. Device analytics includes data such as which functionality are used and the health status of the device. Data collected does not contain information that may be used to identify you, nor the data you store."
enable_register_ip	=	"Enable <a href="{0}" target="_blank" class="link-font">{1}</a> to help you locate your Synology devices in your local network."
enable_register_ip_tip	=	"This option allows Synology to know your IP address to help {1} find {0} over a complex network."
enable_web_assistant	=	"Allow this _DISKSTATION_ to be displayed in Web Assistant (find.synology.com)"
enable_web_assistant_tip	=	"This device will appear in the search results when you use Web Assistant to search for Synology devices within the LAN"
error_webapi_not_found	=	"Failed to activate device analytics. Please contact Synology Technical Support for assistance."
for_more_information	=	"For more information, please see our <a href="http://www.synology.com/company/privacy" target="_blank">Privacy Statement</a>."
join	=	"Enable sending device analytics"
privacy_about_data_collection	=	"For more information, please see our <a class="link-font" href="https://www.synology.com/company/legal/privacy" target="_blank">Privacy Statement</a>."
privacy_about_share_network_location	=	"Synology will collect your IP address and port information, which will only be used for providing this service. Please refer to Synology <a class="link-font" href="https://www.synology.com/company/legal/Services_Data_Collection_Disclosure#device-network-mapping" target="_blank">Services Data Collection Disclosure</a> and <a class="link-font" href="https://www.synology.com/company/legal/privacy" target="_blank">Privacy Statement</a> for details."
share_network_location	=	"Share Network Location"
title	=	"Device Analytics"

[user_setting]
adjust_time	=	"Adjust Time"

[userwizard]
creating_user	=	"Creating user..."
final_descr	=	"The user account {0} has been created."
finalstep_title	=	"User created"
grpinfo_title	=	"Join groups"
join_group	=	"Add"
long_descr	=	"Create user and assign permissions"
quotainfo_descr	=	"Assign usage quota (unlimited quota if disabled)"
quotainfo_title	=	"Assign user quota"
shareinfo_descr	=	"Set the access rights to shared folders"
shareinfo_title	=	"Assign shared folders permissions"
short_descr	=	"Create user"
summary_title	=	"Confirm settings"
user_app_privilege_descr	=	"Allow the user to access following applications"
user_app_privilege_list	=	"Application list"
user_asign_app_privilege	=	"Assign application permissions"
userinfo_descr	=	"Fill in the following fields"
userinfo_title	=	"Enter user information"
welcome	=	"This wizard will guide you through the following user related settings:<p><ul><li>Basic information</li><li>Groups</li><li>Permissions</li></ul></p>"
welcome_title	=	"Welcome to User Creation Wizard"
wizard_title	=	"User Creation Wizard"

[vdsm]
software_spec_not_match_suggestion	=	"The hardware configurations of the Virtual DSM have been changed and downgraded. Please refer its Help for more information about hardware configurations."

[video_player]
broadcast_streaming	=	"Live Stream"
error_play	=	"Video playback failed. The format is not supported by your browser."
error_play_pc	=	"Video playback failed. The format is not supported by your browser or VLC plug-in."
error_play_vlc	=	"Failed to play the video. Please install VLC Player and try again."
external_subtitle	=	"External subtitle"
menu_play	=	"Play"
no_subtitle	=	"No subtitle"
title	=	"Video Player"

[volume]
4k_hdd	=	"4K native drive"
4k_hdd_title	=	"4K Native Drive"
4kn	=	"4Kn"
add_to_swap	=	"Add to swap"
adv_prop_title	=	"Configure"
advisor_action_analyze	=	"Analyze"
advisor_action_analyze_cache_creating_deleting_confirm	=	"The volume is mounting or removing an SSD cache. Please run the analysis later."
advisor_action_analyze_confirm_data	=	"The recommended SSD read-write cache size is generated based on your data usage pattern during the analysis. Make sure to complete the system setup and enable all the services you expect to use beforehand."
advisor_action_analyze_confirm_exclusive_op	=	"Certain operations must be postponed until the analysis is complete or stopped. For example, changing a storage pool's RAID type or auto-updating _OSNAME_."
advisor_action_analyze_confirm_performance	=	"System performance will be slightly affected during the analysis."
advisor_action_analyze_confirm_shutdown_stop	=	"The analysis will stop if your _DISKSTATION_ is shut down by any means."
advisor_action_analyze_confirm_title	=	"The analysis will take at least one week to give more accurate results. Do you want to continue?"
advisor_action_analyze_confirm_yes	=	"Start Analysis"
advisor_action_analyze_memory_insufficient	=	"Insufficient memory ({0}) to run the analysis. Please stop all applications that are not in use and try again."
advisor_action_analyze_reshaping_confirm	=	"{0} or its storage pool is running other operations (e.g., changing RAID type or expanding storage capacity). Please try again later."
advisor_action_analyze_unhealthy_confirm	=	"The analysis can only run on healthy volumes. Please address the issues on {0} before continuing."
advisor_action_cancel	=	"Stop"
advisor_action_cancel_confirm_title	=	"Are you sure you want to stop the analysis?"
advisor_action_cancel_confirm_yes	=	"Stop Analysis"
advisor_action_cancel_insufficient_time_confirm_context	=	"SSD Cache Advisor has not analyzed sufficient data. If you stop the analysis now, there will be no recommendations and the current analyzed cache capacity ({0}) will be reset."
advisor_action_cancel_no_convergence_confirm_context	=	"The analysis is still in process. If you stop the analysis now, there will be no recommendations and the current analyzed cache capacity ({0}) will be reset."
advisor_analyzing_desc_recalculating	=	"Due to changes in your usage pattern, the Advisor will need to recalculate the recommended cache size. Please note this may take a few days."
advisor_analyzing_desc_time_insufficient	=	"The Advisor is analyzing your daily usage data. You will be notified when the analysis is complete."
advisor_analyzing_desc_with_rec_size	=	"A recommended cache size has been generated. If your daily activities, including the scheduled tasks, have been covered during this period of time, you can now stop the analysis."
advisor_analyzing_desc_without_rec_size	=	"The analysis is still in progress. The Advisor will continue to analyze your daily usage data and notify you when the analysis is complete."
advisor_executing	=	"Running SSD Cache Advisor analysis"
advisor_executing_delete_cache	=	"Please stop the SSD Cache Advisor analysis before any other operations. Removing SSD caches during the process will affect the results."
advisor_failed_start	=	"Unable to start SSD Cache Advisor analysis. Please try again later."
advisor_failed_stop	=	"Unable to stop SSD Cache Advisor analysis. Please try again later."
advisor_feasibility_reshape_hard	=	"SSD Cache Advisor is analyzing a volume on this storage pool. Stop the SSD Cache Advisor analysis if you want to continue."
advisor_history_analysis_result	=	"Cache capacity analysis result"
advisor_history_detail_no_converged	=	"SSD Cache Advisor detected that your data usage pattern is still changing by the end of the analysis. As a result, the current analysis result may not include your actual usage pattern. We recommend starting the analysis again and allow SSD Cache Advisor to recommend a more suitable cache capacity."
advisor_history_detail_title	=	"Details"
advisor_history_hot_data	=	"Analyzed cache size"
advisor_history_no_result	=	"No results"
advisor_history_recommended_size	=	"Recommended read-write cache size"
advisor_history_sugestion_context_compatibility_list	=	"We strongly recommend creating an SSD cache with two or more SSDs from the <a class="link-font" href="http://www.synology.com/compatibility?search_by=products&model={0}&category=hdds&p=1" target="_blank">Compatibility List</a>. Using SSDs not on the list may reduce system stability and even lead to data loss."
advisor_history_sugestion_context_general	=	"You can create an SSD read-write cache based on the analysis result."
advisor_history_sugestion_context_ssd_volume	=	"The cache capacity analysis result is larger than half of the current volume size. While you can create an SSD read-write cache based on this analysis result, we strongly recommend replacing this volume with SSDs or create an SSD-only volume for better performance instead."
advisor_history_sugestion_context_suggest_no_recreate	=	"The capacity of this SSD cache is larger than the one recommended by the analysis result. You do not need to create a new SSD cache."
advisor_history_sugestion_context_suggest_recreate	=	"You can remove this SSD cache from Storage Manager and create a new one for better feature support and performance. Before removing the SSD cache, make sure the volume status is healthy."
advisor_history_suggestion_title	=	"Recommendations"
advisor_history_title	=	"Analysis Results"
advisor_info_analyzed_io	=	"I/O speed: {0}/s"
advisor_info_hot_data	=	"Estimated cache size"
advisor_info_target	=	"Analysis Target"
advisor_info_time_spent	=	"Time spent"
advisor_introduction	=	"SSD Cache Advisor intelligently analyzes the daily data usage of your _DISKSTATION_ and recommends ideal read-write cache sizes. The analysis will require at least one week to collect sufficient data and will stop after 30 days if you do not stop it manually."
advisor_introduction_select_volume	=	"Select a volume to analyze"
advisor_learn_more	=	"Learn more"
advisor_no_analyzing_details	=	"No details available"
advisor_no_pin_metadata_desc	=	"If you do not plan on enabling this feature, the recommended value is <b>{0}</b>."
advisor_no_volume	=	"No available volumes"
advisor_not_enough_space_to_save	=	"SSD Cache Advisor analysis is running. To save the analysis progress, make sure the volume has an available capacity of at least 1 GB. To continue without saving, manually stop the analysis now."
advisor_not_enough_space_to_save_with_var	=	"SSD Cache Advisor analysis is running. To save the analysis progress, make sure the volume has an available capacity of at least {0} GB. To continue without saving, manually stop the analysis now."
advisor_pin_metadata_desc	=	"This value includes the capacity required for pinning all Btrfs metadata to the SSD cache."
advisor_state_analyze	=	"Analyzing"
advisor_tray_link	=	"View details"
advisor_tray_title	=	"SSD Cache Advisor"
all_storage_pools	=	"All Storage Pools"
allocate_ssd_cache_size	=	"Allocate SSD Cache Size"
beep_on	=	"Beep on"
btrfs_optimization	=	"Btrfs optimization"
btrfs_space_reclaim	=	"Btrfs space reclamation"
cache_advisor	=	"SSD Cache Advisor"
cache_advisor_read_write_size_warning	=	"The allocated capacity is smaller than <b>{1}</b>, not reaching the capacity recommended by SSD Cache Advisor on {0}. You can add more SSDs for better system performance or click Continue to proceed."
cache_alloc_action	=	"Select action"
cache_alloc_from	=	"Allocate capacity"
cache_allocate_capacity	=	"Allocate SSD cache capacity"
cache_allocate_capacity_desc	=	"SSD cache group supports cache creation on multiple volumes. Allocate the cache group capacity to create an SSD cache for the selected volume."
cache_allocate_size_invalid	=	"The value entered is invalid. Please try again."
cache_allocated_capacity	=	"Allocated capacity"
cache_allocated_size	=	"Modify allocated capacity (GB)"
cache_apply_shared_cache	=	"SSD cache group"
cache_apply_ssd	=	"Selected SSD"
cache_auto_protect_mechanism	=	"Automatic Protection Mechanism "
cache_available_capacity	=	"Available capacity"
cache_cached_read_only_desc	=	"<span class="orange-status">SSD Cache {0} on Volume {1} has crashed, but data are still accessible because the SSD cache is read-only.</span> We recommend going to SSD Cache {0} and clicking <div class="sm-pool-sug-more-btn-img"></div> > <b>Remove</b> to remove the SSD cache and then create a new one. This action will not affect your data."
cache_cancel_removing	=	"Cancel Removing"
cache_choose_alloc_source	=	"Create or allocate from SSD cache group"
cache_choose_mode_on_new	=	"Select a cache mode"
cache_choose_mode_on_old	=	"Select a cache mode"
cache_choose_volume	=	"Select a volume to mount the SSD cache"
cache_choose_volume_and_mode	=	"Select a volume and cache mode"
cache_confirm_remove_crashed_cache_desc	=	"This SSD cache or its target volume has crashed. Data may already be damaged. We recommend that you keep the current environment and contact Synology Technical Support for help. "
cache_confirm_service_stop_desc	=	"I understand that removing SSD cache will temporarily stop all services and interrupt data transmission. "
cache_confirm_ssd_data_remove	=	"I understand that all cache data on the SSDs will be permanently deleted and cannot be recovered"
cache_contains_acceptable_drive_suggestion	=	"SSD Cache {0} on Volume {1} contains SSDs that are not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">compatibility list</a>. You can identify them on the <span class="bold-font">HDD/SSD</span> page. When adding or replacing drives, consider using compatible drives. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
cache_contains_incompatible_drive_remove_cache_suggestion	=	"<span class="red-status">SSD Cache {0} on Volume {1} has one or more SSDs that are not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">Compatibility List</a>.</span> These SSDs cannot be used and must be replaced immediately. Check <span class="bold-font">Cache Drive Info</span> to identify the incompatible or unrecognized SSDs. Then, select SSD Cache {0} and click <div class="sm-pool-sug-more-btn-img"></div> > <span class="bold-font">Remove</span> to remove the SSD cache. Finally, replace them with the compatible SSDs and create a new SSD cache. This action will not affect your data. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
cache_contains_incompatible_drive_with_apm_suggestion	=	"<span class="red-status">SSD Cache {0} on Volume {1} has one or more SSDs that are not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">Compatibility List</a>.</span> These SSDs cannot be used and must be replaced immediately. Check <span class="sm-font-bold">SSD Cache</span> below to identify the incompatible or unrecognized SSDs. Then, deactivate and replace one SSD at a time. Repair the SSD cache each time after replacing an SSD. Repeat this process until all the incompatible or unrecognized SSDs are replaced. The I/O acceleration feature of this SSD cache will be disabled during the repair process. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
cache_contains_incompatible_drive_without_apm_suggestion	=	"<span class="red-status">SSD Cache {0} on Volume {1} has one or more SSDs that are not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">Compatibility List</a>.</span> These SSDs cannot be used and must be replaced immediately. Check <span class="sm-font-bold">SSD Cache</span> below to identify the incompatible or unrecognized drives. Then, deactivate and replace one SSD at a time. Repair the SSD cache each time after replacing an SSD. Repeat this process until all the incompatible or unrecognized SSDs are replaced. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
cache_contains_permitted_drive_remove_cache_suggestion	=	"<span class="orange-status">SSD Cache {0} on Volume {1} contains one or more unverified SSDs.</span> Using unverified SSDs may affect system reliability and stability. You can check <span class="bold-font">Cache Drive Info</span> to identify the unverified SSDs. Then, select SSD Cache {0} and click <div class="sm-pool-sug-more-btn-img"></div> > <span class="bold-font">Remove</span> to remove the SSD cache. Finally, replace the unverified SSDs and create a new SSD cache. This action will not affect your data. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
cache_contains_permitted_drive_with_apm_suggestion	=	"<span class="orange-status">SSD Cache {0} on Volume {1} contains one or more unverified SSDs.</span> Using unverified SSDs may affect system reliability and stability. You can check <span class="bold-font">Cache Drive Info</span> to identify the unverified SSDs. Then, repair the SSD cache after deactivating and replacing one unverified SSD at a time. The I/O acceleration feature of this SSD cache will be disabled during the repair process. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
cache_contains_permitted_drive_without_apm_suggestion	=	"<span class="orange-status">SSD Cache {0} on Volume {1} contains one or more unverified SSDs.</span> Using unverified SSDs may affect system reliability and stability. You can check <span class="bold-font">Cache Drive Info</span> to identify the unverified SSDs. Then, repair the SSD cache after deactivating and replacing one unverified SSD at a time. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
cache_contains_unverified_drive_remove_cache_suggestion	=	"<span class="orange-status">SSD Cache {0} on Volume {1} contains one or more unverified SSDs.</span> Using unverified SSDs may affect system reliability and stability. You can check <span class="bold-font">Cache Drive Info</span> to identify the unverified SSDs. Then, select SSD Cache {0} and click <div class="sm-pool-sug-more-btn-img"></div> > <span class="bold-font">Remove</span> to remove the SSD cache. Finally, replace the unverified SSDs and create a new SSD cache. This action will not affect your data. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
cache_contains_unverified_drive_with_apm_suggestion	=	"<span class="orange-status">SSD Cache {0} on Volume {1} contains one or more unverified SSDs.</span> Using unverified SSDs may affect system reliability and stability. You can check <span class="bold-font">Cache Drive Info</span> to identify the unverified SSDs. Then, repair the SSD cache after deactivating and replacing one unverified SSD at a time. The I/O acceleration feature of this SSD cache will be disabled during the repair process. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
cache_contains_unverified_drive_without_apm_suggestion	=	"<span class="orange-status">SSD Cache {0} on Volume {1} contains one or more unverified SSDs.</span> Using unverified SSDs may affect system reliability and stability. You can check <span class="bold-font">Cache Drive Info</span> to identify the unverified SSDs. Then, repair the SSD cache after deactivating and replacing one unverified SSD at a time. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
cache_crash_advice	=	"Detected a crash event of a SSD Read-Write Cache. It's recommended to check the connection status of its SSDs and then reboot your _DISKSTATION_. To protect data, system will mount its target volume read-only after rebooting to let you perform data backup."
cache_crash_sync_success_desc	=	"The I/O acceleration feature of this SSD cache has been disabled, and the cached data have been synced to the corresponding volume. New data will no longer be written to this SSD cache. Now you can remove the cache."
cache_crashed_desc	=	"{0} is crashed."
cache_crashed_drive_not_enough_suggestion	=	"<span class="red-status">SSD Cache {0} on Volume {1} has crashed.</span> The number of drives installed for the SSD cache is insufficient. Please check the drive connection status or refer to <b>Required Drive Info</b> below to find out which drive is required and install it back in your _DISKSTATION_."
cache_crashed_drive_not_enough_suggestion_multiple	=	"<span class="red-status">SSD Cache {0} on Volume {1} has crashed.</span> The number of drives installed for the SSD cache is insufficient. Please check the drive connection status or refer to <b>Required Drive Info</b> below to find out which drives are required and install them back in your _DISKSTATION_."
cache_crashed_volume_ro_bkp_suggestion	=	"<span class="red-status">SSD Cache {0} on Volume {1} has crashed.</span> Your data may be corrupted. Volume {1} is now in read-only mode. To rescue your data, we recommend copying or backing up the data."
cache_create_affect_confirm	=	"Using the selected SSD(s) to create SSD cache will affect the following:"
cache_create_existing_data_warning	=	"The selected SSDs contain data from an SSD read-write cache that may have been improperly removed. If the cache data are not synced to the previously-mounted volume, the data may crash."
cache_create_limit_local_free_memory	=	"There’s no enough memory for SSD cache creation (system needs to reserve at least {0}) . Please refer to the {1}help{2} to check the memory rules of cache creation."
cache_create_limit_max_total_size	=	"System has already reached the maximum limitation ({0}) of total cache size on this model. "
cache_create_limit_remote_free_memory	=	"There’s no enough memory in another host for SSD cache creation (system needs to reserve at least {0}) . Please refer to the {1}help{2} to check the memory rules of cache creation."
cache_create_limit_same_chassis	=	"There’s no SSD on the same chassis with a Volume to create cache"
cache_create_limit_usable_memory	=	"System has already used {0} memory for SSD cache, and it reaches the limit within this memory configuration. Please refer to the {1}help{2} to check the memory rules of cache creation."
cache_create_model_limit	=	"Unable to create an SSD cache. The maximum cache capacity supported by this model has been reached: {0} GB."
cache_create_new_shared_cache	=	"Create new"
cache_create_no_enough_mem_can_add	=	"Unable to create an SSD cache because of insufficient memory. Please refer to <a href="https://kb.synology.com/DSM/help/DSM/StorageManager/ssd_cache_create" target="_blank">this article</a> for information on memory requirements or to <a href="https://www.synology.com/knowledgebase/DSM/tutorial/General_Setup/How_to_upgrade_memory_capacity_for_Synology_NAS" target="_blank">this article</a> to learn how to expand the system memory."
cache_create_no_enough_mem_unable_add	=	"Unable to create an SSD cache. The maximum memory capacity supported by this model has been reached."
cache_create_stop_service_warn_desc	=	"All system services will be stopped and data transmission will be interrupted temporarily. Please perform this operation at system idle time. "
cache_create_tip	=	"The maximum size of SSD Cache might be limited by the size of selected SSDs, the size of system memory, or model specs."
cache_decide_remove_crashed_cache_desc	=	"I still want to abandon the data on this volume and remove this SSD cache forcibly"
cache_degrade_read_only_desc	=	"<span class="orange-status">SSD Cache {0} on Volume {1} has degraded, but data are still accessible because the SSD cache is read-only.</span> Please refer to <b>Cache Drive Info</b> below to find out the defective SSD and replace it. Afterward, go to SSD Cache {0} and click <div class="sm-pool-sug-more-btn-img"></div> > <b>Repair</b> to repair this SSD cache."
cache_degrade_read_only_desc_multiple	=	"<span class="orange-status">SSD Cache {0} on Volume {1} has degraded, but data are still accessible because the SSD cache is read-only.</span> Please refer to <b>Cache Drive Info</b> below to find out the defective SSDs and replace them. Afterward, go to SSD Cache {0} and click <div class="sm-pool-sug-more-btn-img"></div> > <b>Repair</b> to repair this SSD cache."
cache_degrade_sync_done_desc	=	"The I/O acceleration feature of this SSD cache has been disabled, and the cached data have been synced to the corresponding volume. New data will no longer be written to this SSD cache. Now you can choose to repair or remove the cache."
cache_degrade_sync_progress_desc	=	"The I/O acceleration feature of this SSD cache is disabled. Wait for the system to sync the cache data to the corresponding volume: {0}. After syncing is complete, your data will remain accessible even if the SSD cache crashes."
cache_degraded_desc	=	"<span class="red-status">SSD Cache {0} on Volume {1} has degraded.</span> Automatic Protection Mechanism is not yet enabled because this SSD cache is still protected by redundancy. The I/O acceleration feature of this SSD cache is still operable. Despite the data in this SSD cache are still protected, we still recommend referring to <b>Cache Drive Info</b> below to find out the defective SSD and replace it. Afterward, go to SSD Cache {0} and click <div class="sm-pool-sug-more-btn-img"></div> > <b>Repair</b> to repair this SSD cache."
cache_degraded_desc_multiple	=	"<span class="red-status">SSD Cache {0} on Volume {1} has degraded.</span> Automatic Protection Mechanism is not yet enabled because this SSD cache is still protected by redundancy. The I/O acceleration feature of this SSD cache is still operable. Despite the data in this SSD cache are still protected, we still recommend referring to <b>Cache Drive Info</b> below to find out the defective SSDs and replace them. Afterward, go to SSD Cache {0} and click <div class="sm-pool-sug-more-btn-img"></div> > <b>Repair</b> to repair this SSD cache."
cache_degraded_with_apm_desc	=	"<span class="red-status">SSD Cache {0} on Volume {1} has degraded.</span> Automatic Protection Mechanism is enabled and the I/O acceleration feature of this SSD cache is therefore disabled. Because the data in this SSD cache may not be protected, please refer to <b>Cache Drive Info</b> below to find out the defective SSD and replace it. Afterward, go to SSD Cache {0} and click <div class="sm-pool-sug-more-btn-img"></div> > <b>Repair</b> to repair this SSD cache."
cache_degraded_with_apm_desc_multiple	=	"<span class="red-status">SSD Cache {0} on Volume {1} has degraded.</span> Automatic Protection Mechanism is enabled and the I/O acceleration feature of this SSD cache is therefore disabled. Because the data in this SSD cache may not be protected, please refer to <b>Cache Drive Info</b> below to find out the defective SSDs and replace them. Afterward, go to SSD Cache {0} and click <div class="sm-pool-sug-more-btn-img"></div> > <b>Repair</b> to repair this SSD cache."
cache_degraded_with_apm_sync_done_desc	=	"<span class="orange-status">SSD Cache {0} on Volume {1} has degraded, but data have been synced.</span> Automatic Protection Mechanism has synced all data in the SSD cache to the corresponding volume. The I/O acceleration feature of this SSD cache is disabled for data safety. Please refer to <b>Cache Drive Info</b> below to find out the defective SSD and replace it. Afterward, go to SSD Cache {0} and click <div class="sm-pool-sug-more-btn-img"></div> > <b>Repair</b> to repair this SSD cache."
cache_degraded_with_apm_sync_done_desc_multiple	=	"<span class="red-status">SSD Cache {0} on Volume {1} has degraded.</span> Automatic Protection Mechanism has synced all data in the SSD cache to the corresponding volume. The I/O acceleration feature of this SSD cache is disabled for data safety. Please refer to <b>Cache Drive Info</b> below to find out the defective SSDs and replace them. Afterward, go to SSD Cache {0} and click <div class="sm-pool-sug-more-btn-img"></div> > <b>Repair</b> to repair this SSD cache."
cache_disk_loc_mismatch	=	"<span class="red-status">Some SSDs for SSD Cache {0} on Volume {1} are placed in different slots on the active and passive servers.</span> Go to the Overview page and check the Drive Information of the active server (the "Show hot spare/SSD cache" option needs to be ticked). Shut down the passive server and then relocate its SSDs to match up with the active server's drive positions."
cache_disk_need_dsmupdate_suggestion	=	"<span class="orange-status">SSD Cache {0} on Volume {1} contains one or more SSDs that require you to update _OSNAME_.</span> To continue using these SSDs, go to <span class="sm-font-bold">Control Panel</span> > <span class="sm-font-bold">Update & Restore</span> > <span class="sm-font-bold">_OSNAME_ Update</span> to update _OSNAME_. For more information, check the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">Compatibility List</a>."
cache_disk_need_fwupgrade_suggestion	=	"<span class="orange-status">SSD Cache {0} on Volume {1} contains one or more SSDs that require a firmware update.</span> To continue using these SSDs, go to <span class="sm-font-bold">HDD/SSD</span> > <span class="sm-font-bold">Action</span> > <span class="sm-font-bold">Firmware Update</span> to update the drive firmware."
cache_disk_warning_remove_cache_suggestion	=	"<span class="orange-status">An SSD of SSD Cache {0} on Volume {1} has entered warning status.</span> Please check <span class="bold-font">Cache Drive Info</span> to identify the defective SSD. Then, select SSD Cache {0} and click <div class="sm-pool-sug-more-btn-img"></div> > <span class="bold-font">Remove</span> to remove this SSD cache. Finally, replace the defective SSD and create a new SSD cache. This action will not affect your data."
cache_disk_warning_remove_cache_suggestion_multiple	=	"<span class="orange-status">SSDs of SSD Cache {0} on Volume {1} have entered warning status.</span> Please check <span class="bold-font">Cache Drive Info</span> to identify the defective SSDs. Then, select SSD Cache {0} and click <div class="sm-pool-sug-more-btn-img"></div> > <span class="bold-font">Remove</span> to remove this SSD cache. Finally, replace the defective SSDs and create a new SSD cache. This action will not affect your data."
cache_disk_warning_suggestion	=	"<span class="orange-status">An SSD of SSD Cache {0} on Volume {1} has entered warning status.</span> Please check <span class="bold-font">Cache Drive Info</span> to identify the defective SSD. Then, go to <span class="bold-font">HDD/SSD</span> to deactivate and replace the defective SSD before repairing the SSD cache (select SSD Cache {0} > <div class="sm-pool-sug-more-btn-img"></div> > <span class="bold-font">Repair</span>)."
cache_disk_warning_suggestion_multiple	=	"<span class="orange-status">SSDs of SSD Cache {0} on Volume {1} have entered warning status.</span> Please check <span class="bold-font">Cache Drive Info</span> to identify the defective SSDs. Then, go to <span class="bold-font">HDD/SSD</span> to deactivate and replace the defective SSDs one at a time before repairing the SSD cache (select SSD Cache {0} > <div class="sm-pool-sug-more-btn-img"></div> > <span class="bold-font">Repair</span>)."
cache_disk_warning_with_apm_suggestion	=	"<span class="orange-status">An SSD of SSD Cache {0} on Volume {1} has entered warning status.</span> Please check <span class="bold-font">Cache Drive Info</span> to identify the defective SSD. Then, go to <span class="bold-font">HDD/SSD</span> to deactivate and replace the defective SSD before repairing the SSD cache (select SSD Cache {0} > <div class="sm-pool-sug-more-btn-img"></div> > <span class="bold-font">Repair</span>). The I/O acceleration feature of this SSD cache will be disabled during the repair process."
cache_disk_warning_with_apm_suggestion_multiple	=	"<span class="orange-status">SSDs of SSD Cache {0} on Volume {1} have entered warning status.</span> Please check <span class="bold-font">Cache Drive Info</span> to identify the defective SSDs. Then, go to <span class="bold-font">HDD/SSD</span> to deactivate and replace the defective SSDs one at a time before repairing the SSD cache (select SSD Cache {0} > <div class="sm-pool-sug-more-btn-img"></div> > <span class="bold-font">Repair</span>). The I/O acceleration feature of this SSD cache will be disabled during the repair process."
cache_drive_location	=	"Drive Location"
cache_ebox_internal_mix_warning	=	"If your SSD cache uses drives from an expansion unit, do not disconnect the expansion unit. Disconnection may cause the SSD cache and its volume to crash and result in data loss."
cache_ebox_power_button_disabled	=	"If your SSD cache uses drives from an expansion unit, you will not be able to power off the expansion unit via its physical power button."
cache_enabled	=	"SSD cache enabled"
cache_erase_remaining_data	=	"Clear the remaining cache data on the selected SSDs?"
cache_error_size_range	=	"Input value must be from {0} to {1} GB."
cache_error_size_range_with_pin_metadata	=	"At least {0} GB is required to pin all metadata to SSD cache. The maximum available capacity is {1} GB."
cache_estimate_capacity_tip	=	"Learn more about the <a class="link-font" href="https://kb.synology.com/DSM/help/DSM/StorageManager/ssd_cache_what_is_raid" target="_blank">storage capacity</a> each RAID type offers."
cache_healthy_desc	=	"{0} is healthy."
cache_hit_rate_set_resource_monitor_desc	=	"Enabling usage history allows the system to collect and analyze the SSD cache hit rate data. To enable usage history, go to <a class="link-font open-resource-monitor-setting" href="#">Resource Monitor > Settings</a>."
cache_latest_version	=	"Latest version"
cache_load_fail_not_enough_memory	=	"Due to insufficient system memory, SSD read-write cache {0} cannot be mounted and has crashed. Please make sure the system has at least {1} MB of available memory; it currently has only {2} MB of memory available."
cache_max_degrade_flush	=	"Enable Automatic Protection Mechanism only when the SSD read-write cache is not protected by redundancy"
cache_max_degrade_flush_desc	=	"Enable this feature to stop Automatic Protection Mechanism from activating when the read-write cache is degraded but still protected by redundancy. For example, if the configured RAID type can withstand 2 SSD failures and only 1 SSD has failed, the protection mechanism will not be activated. This helps minimize the impact on system performance but has a lower level of protection for data."
cache_metadata_cache_size_check	=	"Metadata size may increase with volume usage. Therefore, we recommend setting the allocated capacity to at least 2% of the volume size: {0}."
cache_metadata_required	=	"(Required cache capacity: {0})"
cache_minimum_ssd_requirement	=	"Minimum SSD Requirement"
cache_missing	=	"SSD cache missing"
cache_mode	=	"SSD cache mode"
cache_mode_read_only	=	"Read-only"
cache_mode_read_write	=	"Read-write"
cache_name_by_volume	=	"SSD cache on Volume {0}"
cache_no_ssd	=	"No available SSDs to create caches."
cache_no_vol	=	"Please create at least one volume before creating an SSD cache."
cache_not_latest_version_desc	=	"Not the latest version"
cache_not_latest_version_note	=	"This SSD cache is created in a previous _OSNAME_ version. You can remove it from Storage Manager and create a new one for better feature support and performance."
cache_notice	=	"Note:"
cache_pin_metadata	=	"Pin all Btrfs metadata"
cache_pin_metadata_enable	=	"Enable"
cache_raid_error_bkp_suggestion	=	"<span class="red-status">Unrecoverable errors have occurred to SSD Cache {0} on Volume {1}.</span> This is caused by SSD cache degradation and drive errors. Please back up the data in this volume immediately. Afterward, please go to Volume {1} and click <div class="sm-pool-sug-more-btn-img"></div> > <b>Remove</b> to remove the volume and then create a new one."
cache_raid_property	=	"Configure cache RAID type"
cache_raid_type	=	"Cache RAID type"
cache_raid_type_info	=	"The cache RAID types available depend on the selected cache mode and the number of SSDs in your _DISKSTATION_."
cache_read_only_raid_desc	=	"Select a cache RAID type to configure fault tolerance and improve the random read performance of the volume on which the SSD cache is mounted. Only up to {0} SSDs can be selected."
cache_read_write_cache_warning	=	"Do not remove an SSD directly from your _DISKSTATION_ if the SSD is configured as a read-write cache. Please go to Storage Manager > Storage to safely remove the read-write cache first before removing the SSD."
cache_read_write_raid_desc	=	"Select a cache RAID type to configure fault tolerance and improve the random read/write performance of the volume on which the SSD cache is mounted. Only up to {0} SSDs can be selected."
cache_redundancy_degrade_warning	=	"This SSD cache group has a lower fault tolerance than its storage pool. To ensure the necessary data protection, we recommend selecting a cache RAID type with the same or higher level of fault tolerance as the RAID type of the storage pool. Are you sure you want to continue?"
cache_redundancy_degrade_warning_for_pool	=	"Applying this setting will increase the storage pool's fault tolerance but will not affect the RAID type of the SSD caches. If you choose to continue, we recommend removing the SSD caches and creating new ones with the same or higher level of fault tolerance to ensure the necessary data protection."
cache_remove_confirm_reminder	=	"Please note the following before removing:"
cache_remove_note_hcl_migrated	=	"The following drives are not on the compatibility list. Once the SSD cache is removed, they can no longer be used in this _DISKSTATION_: {0}"
cache_repairing_desc	=	"{0} is being repaired."
cache_required_mem_size	=	"Required system memory"
cache_required_memory	=	"Required system memory"
cache_ro_degrade_desc	=	"{0} is degraded, please replace it with a new SSD and repair RAID as soon as possible."
cache_ro_safe_missing	=	"<span class="orange-status">SSD Cache {0} on Volume {1} is missing.</span> Data are still accessible because the SSD cache is read-only. Check if the SSD is correctly inserted, or refer to <b>Required Drive Info</b> below to identify the required SSD. Reinstall the SSD into your _DISKSTATION_, then restart the system to use this SSD cache. If you no longer need this SSD cache, locate SSD Cache {0} under Volume {1}, and click <div class="sm-pool-sug-more-btn-img"></div> > <b>Remove</b>."
cache_ro_type_description_basic	=	"This configuration requires only one SSD to provide basic acceleration for random I/O, but it does not have fault tolerance. If the SSD becomes defective, the SSD cache will no longer be able to accelerate random I/O; however, no data loss will occur."
cache_ro_type_description_raid_0	=	"RAID 0 requires two or more SSDs. This configuration increases performance and capacity but provides no fault tolerance. A single SSD failure will result in the SSD cache being unable to accelerate random I/O; however, no data will be lost. RAID 0 makes for a practical choice if there are cost considerations."
cache_rw_disable_shared_cache_not_support	=	"Unable to create an SSD read-write cache. The selected cache RAID type does not support this cache mode."
cache_rw_disable_ssd_insufficient	=	"Insufficient number of SSDs for creating a read-write cache. You need to install at least 1 more {0} SSD."
cache_rw_remove_long_warning	=	"It is suggested that removing read-write cache be conducted when system is idle to reduce impact on system performance of data synchronization (This process may take hours to complete.)"
cache_rw_safe_missing	=	"<span class="orange-status">SSD Cache {0} on Volume {1} is missing.</span> Data are still accessible because Automatic Protection Mechanism has synced the data to the corresponding HDD. We recommend going to SSD Cache {0} and clicking <div class="sm-pool-sug-more-btn-img"></div> > <b>Remove</b> to remove this SSD cache and then create a new one."
cache_rw_safe_missing_multiple	=	"<span class="orange-status">SSD Cache {0} on Volume {1} is missing.</span> Data are still accessible because Automatic Protection Mechanism has synced the data to the corresponding HDDs. We recommend going to SSD Cache {0} and clicking <div class="sm-pool-sug-more-btn-img"></div> > <b>Remove</b> to remove this SSD cache and then create a new one."
cache_rw_type_description_raid_5	=	"RAID 5 requires at least three SSDs. This configuration has a better read performance than RAID 1 and provides fault tolerance. It can sustain one SSD failure without data loss. When an SSD fails, data from that SSD will be reconstructed from the parity striped across the remaining SSDs. As a result, both read and write performance will be severely impacted when RAID 5 is in a degraded state. RAID 5 is ideal when capacity and cost are more important than performance."
cache_rw_type_description_raid_6	=	"RAID 6 requires at least four SSDs. This configuration is similar to RAID 5, except it provides another layer of striping and can sustain two SSD failures. However, it has a lower performance than RAID 5 because of this additional fault tolerance. RAID 6 is ideal when capacity and the ability to sustain multiple SSD failures are important, and there are cost considerations."
cache_safe_crash_desc	=	"<span class="orange-status">SSD Cache {0} on Volume {1} has crashed, but data have been synced.</span> Data are still accessible because Automatic Protection Mechanism has synced the data to the corresponding HDD. However, new data will not be written in this SSD cache. We recommend going to SSD Cache {0} and clicking <div class="sm-pool-sug-more-btn-img"></div> > <b>Remove</b> to remove this SSD cache and then create a new one."
cache_safe_crash_desc_multiple	=	"<span class="orange-status">SSD Cache {0} on Volume {1} has crashed, but data have been synced.</span> Data are still accessible because Automatic Protection Mechanism has synced the data to the corresponding HDDs. However, new data will not be written in this SSD cache. We recommend going to SSD Cache {0} and clicking <div class="sm-pool-sug-more-btn-img"></div> > <b>Remove</b> to remove this SSD cache and then create a new one."
cache_same_chassis_tip	=	"SSDs selected to create cache must be in the same chassis with the HDDs of target Volume/iSCSI Block LUN."
cache_select_alloc_source_desc	=	"Create and mount an SSD cache on Volume {0}. To create the SSD cache, you can create a new SSD cache group on the storage pool of the selected volume and allocate its capacity. You can also allocate capacity from an existing cache group on another storage pool."
cache_select_mode_on_cur_desc	=	"You can allocate capacity from SSD Cache Group {1} on Storage Pool {0} to create an SSD cache. Select a cache mode for this SSD cache."
cache_select_mode_on_new_desc	=	"A new SSD cache group will be created. You can allocate its cache group capacity to create an SSD cache on Volume {0}. Select a cache mode for this SSD cache."
cache_select_mode_on_selected_desc	=	"You can allocate capacity from SSD Cache Group {0} to create an SSD cache. Select a cache mode for this SSD cache."
cache_select_volume_desc	=	"SSD cache enhances performance where input-output (I/O) operations require frequent access to randomly placed data. Every SSD cache allocates capacity from an SSD cache group. If the storage pool of the selected volume does not already have an SSD cache group, you will be guided to create one. <a href="https://kb.synology.com/DSM/tutorial/What_are_Some_Considerations_for_Creating_SSD_Cache" target="_blank" class="link-font">Learn more</a>"
cache_service_keep_available	=	"Service is still available during this process."
cache_shared_cache_estimate_capacity	=	"Estimated capacity of SSD cache group"
cache_shutdown	=	"Shut Down"
cache_shutdown_remind	=	"Do not show again"
cache_shutdown_warn	=	"As SSD cache is part of the volume, please make sure not to take the SSDs out of your _DISKSTATION_ even when the device is powered off. Directly taking out the SSDs can lead to unrecoverable data loss. If you no longer need SSD cache, please go to {0} and properly remove the SSD cache first so the cached data can be fully written back to the volumes to avoid data loss."
cache_size	=	"Cache size"
cache_size_limit_local_free_memory	=	"Maximum allowable  size is now limited by the size of free memory. Please refer to {0}help{1} for the detail."
cache_size_limit_max_total_size	=	"Maximum allowable size is now limited by the maximum cache size of this model。"
cache_size_limit_remote_free_memory	=	"Maximum allowable size is now limited by the size of free memory in another host. Please refer to {0}help{1} for the detail."
cache_size_limit_usable_memory	=	"Maximum allowable size is now limited by the size of usable memory of SSD Cache. Please refer to {0}help{1} for the detail。"
cache_skip_seq_io	=	"Skip sequential I/O"
cache_skip_seq_io_capital	=	"Skip Sequential I/O"
cache_skip_seq_io_desc	=	"Read and write sequential data directly from/to drives to improve speed and performance, as well as to increase the life span of the SSDs. Please enable this function when you are using backup applications."
cache_skip_seq_io_intro	=	"Make SSD cache stop caching sequential I/O when your target storage devices have excellent sequential I/O performance."
cache_ssd_insufficient_alert	=	"Insufficient number of SSDs for creating a read-write cache. To perform this operation, you need to insert at least 1 more {0} SSD."
cache_ssd_on_location	=	"SSDs on {0}"
cache_stop_advisor_confirm	=	"SSD Cache Advisor is still analyzing {0}. Please wait for the analysis to complete or click Stop Analysis to stop it now."
cache_stop_advisor_confirm_yes	=	"Stop Analysis"
cache_stop_services_warn_desc	=	"This operation will temporarily stop all services and interrupt data transmission."
cache_sync_fail_desc	=	"Synchronization incomplete. Data on the target volume may be damaged."
cache_sys_raid_repair	=	"The selected SSDs contain crucial system data that currently cannot be removed. Please go to the Overview page and repair any failed system partitions first."
cache_type_description_raid_1	=	"RAID 1 improves read performance and offers a write speed comparable to that of a single SSD. This configuration mirrors data across at least two SSDs for redundancy and protects against one SSD failure. RAID 1 is suitable if you value fault tolerance."
cache_type_description_raid_10	=	"RAID 10 combines the benefits of RAID 0 and RAID 1. It improves read/write speeds and provides fault tolerance. RAID 10 can sustain multiple SSD failures, provided each failure is in a different sub-group. RAID 10 requires at least 4 SSDs but offers only half of the storage capacity. This configuration is ideal for database servers and other applications with high I/O demands."
cache_unable_cancel_removing	=	"SSD cache is about to be removed, please wait patiently."
cache_unable_create_desc	=	"Can not create SSD Cache. Here are the reason(s)"
cache_understand_above	=	"I understand that data loss may occur if the SSD read-write cache is not removed properly"
cache_unsafe_crash_desc	=	"{0} has crashed. Data on the target volume may be damaged. Please contact Synology Technical Support for assistance."
cache_usage	=	"Cache composition"
cache_usage_ro_desc	=	"Reusable ({0}) / Total ({1})"
cache_usage_ro_desc_tip	=	"Reusable space contains data that can be overwritten by new data."
cache_usage_rw_desc	=	"Occupied ({0}), Reusable ({1}) / Total ({2})"
cache_usage_rw_desc_tip	=	"Occupied space contains data not yet synced to the volume. This space also stores metadata when Pin all Btrfs metadata is enabled.<br>Reusable space contains data that have been synced and can be overwritten by new data."
cache_uses_existed_shared_cache	=	"Allocate from"
cache_volume_alert_abnormal	=	"The volume or its storage pool is in an abnormal status. Go to the Storage page and check the suggestions under the corresponding storage pool."
cache_volume_alert_abnormal_passive	=	"The volume is in an abnormal status on the passive server. Go to the Storage page and check the suggestions under the corresponding storage pool."
cache_volume_alert_actioning	=	"The volume is running other operations. Please try again later."
cache_volume_alert_actioning_passive	=	"The volume on the passive server is running other operations. Try again later."
cache_volume_alert_lock_failed	=	"Other operations are running in the storage pool of this volume. Please try again later."
cache_volume_alert_lock_failed_passive	=	"Other operations are running in the storage pool of this volume on the passive server. Please try again later."
cache_volume_alert_no_free_space_cant_expand	=	"SSD Cache Group {0} on Storage Pool {1} ran out of available capacity. The selected cache RAID type does not support capacity expansion. If you need more capacity, consider removing this cache group and creating a new one of a larger size."
cache_volume_alert_no_free_space_cant_expand_on_passive	=	"On the passive server, SSD Cache Group {0} on Storage Pool {1} ran out of available capacity. The selected cache RAID type does not support capacity expansion. If you need more capacity, consider removing this cache group and creating a new one of a larger size."
cache_volume_alert_no_free_space_need_expand	=	"SSD Cache Group {0} on Storage Pool {2} ran out of available capacity. Click the storage pool's upper-right icon to manage and expand the cache group. Once done, you can allocate the cache group capacity to create an SSD cache on Volume {1}."
cache_volume_alert_no_free_space_need_expand_on_passive	=	"On the passive server, SSD Cache Group {0} on Storage Pool {2} ran out of available capacity. To create an SSD cache on Volume {1}, you need to expand the cache group capacity. Replace the smallest SSD in the cache group with a larger one, and then repair the cache group. Ensure the configurations on both servers are identical."
cache_volume_alert_shared_cache_abnormal	=	"The SSD cache group is in an abnormal status. Go to the Storage page and check the suggestions under the corresponding storage pool."
cache_volume_alert_shared_cache_abnormal_passive	=	"The SSD cache group is in an abnormal status on the passive server. Go to the Storage page and check the suggestions under the corresponding storage pool."
cache_volume_alert_shared_cache_lock_failed	=	"Ongoing operations in this SSD cache group. Please try again later."
cache_volume_alert_shared_cache_lock_failed_passive	=	"Ongoing operations in this SSD cache group on the passive server. Please try again later."
cache_volume_alert_singe_cache_existing	=	"Unable to create an SSD cache group because there are older versions of the SSD cache in this storage pool. Remove these older versions before trying again."
cache_volume_alert_single_cache	=	"Multiple storage spaces in the same storage set cannot be mounted separately for shared SSD caching and dedicated SSD caching. Please remove all SSD caches in this storage pool and create the shared SSD cache to allocate multiple volumes under this storage pool."
cache_volume_unavaliable_abnormal	=	"The volume or its storage pool is in an abnormal status. Please resolve this issue first."
cache_volume_unavaliable_abnormal_passive	=	"The volume is in an abnormal status on the passive server. Go to the Storage page and check the suggestions under the corresponding storage pool."
cache_volume_unavaliable_actioning	=	"The volume is processing other operations. Please try again after the operations are complete."
cache_volume_unavaliable_actioning_passive	=	"The volume on the passive server is processing other operations. Try again after the operations are complete."
cache_volume_unavaliable_lock_failed	=	"Other operations are running in this storage pool. Please try again later."
cache_volume_unavaliable_lock_failed_passive	=	"Other operations are running in this storage pool on the passive server. Please try again later."
cache_volume_unavaliable_mounted	=	"The volume is already mounted with an SSD cache."
cache_volume_unavaliable_multiple	=	"No available volumes for creating SSD caches. An SSD cache cannot be created on a volume that matches any of the following conditions:"
cache_volume_unavaliable_multiple_item_abnormal	=	"Abnormal volume or storage pool status"
cache_volume_unavaliable_multiple_item_abnormal_passive	=	"Abnormal volume status on the passive server"
cache_volume_unavaliable_multiple_item_actioning	=	"Running other operations"
cache_volume_unavaliable_multiple_item_actioning_passive	=	"Running other operations on the passive server"
cache_volume_unavaliable_multiple_item_lock_failed	=	"Ongoing operations in the storage pool of the volume"
cache_volume_unavaliable_multiple_item_lock_failed_passive	=	"Ongoing operations in the storage pool of the volume on the passive server"
cache_volume_unavaliable_multiple_item_mounted	=	"Mounted with SSD cache"
cache_write_mode	=	"Cache Mode"
change_settings	=	"Change Settings"
change_swap_disk_config	=	"SSDs which are used as SSD cache cannot be added to swap. To remove an SSD from swap, please go to the {0} page."
choose_pool_from_step_description	=	"Volume must be created on a storage pool. You can choose an existing storage pool or create a new one."
choose_unfinished_shr_operation_title	=	"Continue with Unfinished SHR Configurations"
cluster_storage_unit	=	"Cluster Storage Unit"
configuration	=	"Configurations"
confirm_close_cache_create_wizard_desc	=	"The SSD cache creation process is not complete. Are you sure you want to end the SSD cache creation process?"
confirm_close_cache_create_wizard_title	=	"End the creation process"
confirm_following_notice	=	"Please confirm the following:"
continue_unfinished_shr	=	"Continue with unfinished SHR configurations"
continue_unfinished_shr_suggestion	=	"The previous operation is unfinished. Please complete the remaining steps."
controller_i	=	"Controller {0}"
controller_status_abnormal	=	"{0} is not available but the corresponding storage pools and volumes are in healthy status."
create_ssd_cache	=	"Create SSD Cache"
create_volume	=	"Create Volume"
create_volume_desc	=	"A volume is where your data are stored and is created on a storage pool. Please select or create a storage pool before proceeding."
daily	=	"Daily"
data_heat_map	=	"Recently Accessed Data"
data_scrubbing_confirmed	=	"Yes, show me the data scrubbing page."
data_scrubbing_disable	=	"Don't show this again"
data_scrubbing_explanation	=	"RAID scrubbing has not been performed for a month. We recommend you perform RAID scrubbing to ensure data integrity. Click OK to launch Storage Manager to manually perform RAID scrubbing on the following volume(s):"
data_scrubbing_notice	=	"The progress of data scrubbing will be lost if the system restarts or shuts down before the process is complete."
data_scrubbing_page_title	=	"Data Scrubbing"
data_scrubbing_suggestion	=	"RAID Scrubbing Reminder"
dcache_data_scrubbing_confirmed	=	"Yes, please run data scrubbing."
dcache_fsck	=	"The data in the disk write cache has probably been lost.  We suggest you run a full scan of the file system. It will stop all services and reboot. Once the operation is completed, we suggest you perform RAID scrubbing to ensure data integrity."
dedicated_ssd_cache	=	"Cache device"
del_hard_check_fail	=	"Unable to perform this action because of the following reasons:"
del_soft_check_fail	=	"The system is processing the task(s) below. Click Remove to continue."
disk_secure_erasing	=	"Secure Erase is being performed"
disk_secure_erasing_feasibility	=	"<b>Storage Manager</b>: Secure Erase is running on one or more drives. Wait for the operations to complete and try again."
do_data_scrubbing	=	"Performing data scrubbing"
do_fs_defrag	=	"Performing file system defragmentation"
do_fs_scrubbing	=	"Performing file system scrubbing"
drv_hybrid	=	"Hybrid"
eunit_power_button_disabled	=	"I understand that power button of Expansion Unit has no power-off function when the volume is created on the drive of Expansion Unit."
exceed_max_disk_number	=	"The maximum number of drives is {0}"
exceeds_single_max_volume_size	=	"The allocated size cannot exceed the maximum single volume size: 200 TB."
expand_size	=	"Expand Size"
expand_size_desc	=	"After expanding the storage pool, you can click <b>Expand</b> to expand the volume size."
expansion_disk	=	"Expansion Drive"
extent_size_title	=	"Advanced LUN"
first_pool_name	=	"Storage Pool 1"
first_pool_name_raid	=	"Storage Pool 1 ({0})"
force_enable	=	"Force mount"
force_enable_confirm	=	"I understand that data loss might occur when force mounting {0}."
force_enable_warning	=	"The SSD write cache on {0} is missing. If you force mount {0}, data loss might occur."
format_hd_confirm	=	"I understand that the data on the SSDs will be removed and that system services and data transmission will be stopped temporarily"
format_hd_question	=	"All data on the selected SSDs will be deleted."
fs_defrag	=	"File System Defragmentation"
fs_defrag_cancel	=	"Cancel file system defragmentation"
fs_defrag_confirm_attention	=	"Volume usage may increase if the volume contains snapshots of shared folders."
fs_defrag_confirm_desc	=	"This operation reduces the degree of file system fragmentation and improves file read/write performance. The time required depends on the volume size and the degree of fragmentation. While the operation is running, services will remain available but at a slower rate."
fs_defrag_confirm_title	=	"Are you sure you want to perform file system defragmentation?"
fs_defrag_notice	=	"File system defragmentation lowers the degree of file system fragmentation and improves file system performance. Please note that this operation will increase the volume usage if the volume contains snapshots. File system defragmentation will be stopped if the system is powered off during the process."
fs_defrag_progress	=	"Analyzed {1} files; Defragmented {0} files"
fs_scrubbing_notice	=	"File system scrubbing will be stopped if the system is shut down."
fsck_completed_title	=	"Scan of filesystem has completed"
fsck_confirmed	=	"Yes, stop all service and run a full scan of the file system after reboot."
fsck_conpleted_note_part_one	=	"The full scan of filesystem has completed. We suggest you do data scrubbing on"
fsck_conpleted_note_part_two	=	"or add them to data scrubbing schedule to ensure data integrity."
global_setting_dedup_enabled_volume_lable_multiple	=	"Automatic deduplication"
global_setting_dedup_enabled_volume_lable_single	=	"Automatic deduplication"
global_setting_dedup_main_desc	=	"Data deduplication allows you to store more data in less space by eliminating duplicated blocks of data. You can set data deduplication to run during specific hours, thereby preventing it from affecting system performance during important services or tasks. <a class="{0}" id={1} href="#">Learn more</a>"
global_setting_dedup_no_vol_desc	=	"You have not enabled this feature on any Btrfs volumes."
global_setting_dedup_title	=	"Data Deduplication Schedule"
goto_cms_manage_pool	=	"Cannot modify this {0} because it belongs to a cluster storage unit. Please go to CMS to manage it."
goto_cms_manage_volume	=	"Cannot modify this volume because it belongs to a cluser storage unit. Please go to CMS to manage it."
hard_check_desc	=	"You need to check the following:"
hard_check_fail	=	"Unable to perform this action because of the following reasons:"
hard_check_title	=	"Unable to Remove {0}"
hard_check_title_eject	=	"Unable to Eject {0}"
hdd_test	=	"HDD Test"
hotspare_disk_same_chassis_note	=	"Hot Spare drive is only applicable to the storage pool that is controlled by the same controller."
hybrid_ssd_warning	=	"Using different SSD models to create the SSD cache may affect its performance."
ignore_data_scrubbing_confirmed	=	"Ignore the data scrubbing can not fix the inconsistency of your RAID. It probably cause data corrupt when you recovery your RAID. Are you sure you want to ignore it?"
ignore_fsck_confirmed	=	"Ignore the full scan of the filesystem probably cause unexpected error on your filesystem. Are you sure you want to ignore it?"
initializing_inode_table	=	"Optimizing file system"
initializing_inode_table_help	=	"The system can be safely accessed, shut down, or rebooted now."
insufficien_disk_number	=	"The minimum number of drives is {0}."
iscsilun_block_help	=	"This type of LUN is created on a RAID Group and provides flexibility of dynamic capacity management with optimized access performance."
iscsilun_desc	=	"Create, manage, and map LUNs."
iscsitrg_desc	=	"Create and manage iSCSI targets, which can be used to map LUNs."
least_swap_device_warning	=	"Please add at least one device to swap."
limit_raid_disk_number	=	"Maximum drive number per RAID"
limit_raid_disk_number_info	=	"A higher number of drives per RAID increases the probability of RAID failure. We recommend setting no more than 12 drives per RAID array or using RAID 6 to ensure data security."
lun_cache_cached_read_only_desc	=	"<span class="orange-status">SSD Cache {0} on LUN ({1}) has crashed, but data are still accessible because the SSD cache is read-only.</span> We recommend going to SSD Cache {0} and clicking <div class="sm-pool-sug-more-btn-img"></div> > <b>Remove</b> to remove the SSD cache and then create a new one. This action will not affect your data."
lun_cache_contains_incompatible_drive_remove_cache_suggestion	=	"<span class="red-status">SSD Cache {0} on LUN ({1}) has one or more SSDs that are not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">Compatibility List</a>.</span> These SSDs cannot be used and must be replaced immediately. Moreover, this _OSNAME_ version no longer supports creating SSD caches on block-level LUNs. To continue using the block-level LUN, please remove SSD Cache {0} from Storage Manager. To use compatible SSDs to create a new SSD cache, please convert LUN ({1}) to a <a href="https://kb.synology.com/DSM/tutorial/Transfer_data_from_block_level_LUN" class="link-font" target="_blank">file-level LUN</a>."
lun_cache_contains_incompatible_drive_with_apm_suggestion	=	"<span class="red-status">The SSD cache on LUN ({1}) has one or more SSDs that are not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">Compatibility List</a>.</span> These SSDs cannot be used and must be replaced immediately. Check <span class="bold-font">SSD Cache</span> to identify the incompatible or unrecognized SSDs. Then, deactivate and replace one SSD at a time. Repair the SSD cache each time after replacing an SSD. Repeat this process until all the incompatible or unrecognized SSDs are replaced. The I/O acceleration feature of this SSD cache will be disabled during the repair process. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
lun_cache_contains_incompatible_drive_without_apm_suggestion	=	"<span class="red-status">The SSD cache on LUN ({1}) has one or more SSDs that are not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">Compatibility List</a>.</span> These SSDs cannot be used and must be replaced immediately. Check <span class="bold-font">SSD Cache</span> to identify the incompatible or unrecognized SSDs. Then, deactivate and replace one SSD at a time. Repair the SSD cache each time after replacing an SSD. Repeat this process until all the incompatible or unrecognized SSDs are replaced. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
lun_cache_contains_permitted_drive_remove_cache_suggestion	=	"<span class="orange-status">SSD Cache {0} on LUN ({1}) contains one or more unverified SSDs.</span> Using unverified SSDs may affect system reliability and stability. Moreover, this _OSNAME_ version no longer supports creating SSD caches on block-level LUNs. To continue using the block-level LUN, please remove SSD Cache {0} from Storage Manager. To use compatible SSDs to create a new SSD cache, please remove the block-level LUN and create a new file-level LUN. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
lun_cache_contains_permitted_drive_with_apm_suggestion	=	"<span class="orange-status">SSD Cache {0} on LUN ({1}) contains one or more unverified SSDs.</span> Using unverified SSDs may affect system reliability and stability. You can check <span class="bold-font">Cache Drive Info</span> to identify the unverified SSDs. Then, repair the SSD cache after deactivating and replacing one unverified SSD at a time. The I/O acceleration feature of this SSD cache will be disabled during the repair process. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
lun_cache_contains_permitted_drive_without_apm_suggestion	=	"<span class="orange-status">SSD Cache {0} on LUN ({1}) contains one or more unverified SSDs.</span> Using unverified SSDs may affect system reliability and stability. You can check <span class="bold-font">Cache Drive Info</span> to identify the unverified SSDs. Then, repair the SSD cache after deactivating and replacing one unverified SSD at a time. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
lun_cache_contains_unverified_drive_remove_cache_suggestion	=	"<span class="orange-status">SSD Cache {0} on LUN ({1}) contains one or more unverified SSDs.</span> Using unverified SSDs may affect system reliability and stability. Moreover, this _OSNAME_ version no longer supports creating SSD caches on block-level LUNs. To continue using the block-level LUN, please remove SSD Cache {0} from Storage Manager. To use compatible SSDs to create a new SSD cache, please remove the block-level LUN and create a new file-level LUN. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
lun_cache_contains_unverified_drive_with_apm_suggestion	=	"<span class="orange-status">SSD Cache {0} on LUN ({1}) contains one or more unverified SSDs.</span> Using unverified SSDs may affect system reliability and stability. You can check <span class="bold-font">Cache Drive Info</span> to identify the unverified SSDs. Then, repair the SSD cache after deactivating and replacing one unverified SSD at a time. The I/O acceleration feature of this SSD cache will be disabled during the repair process. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
lun_cache_contains_unverified_drive_without_apm_suggestion	=	"<span class="orange-status">SSD Cache {0} on LUN ({1}) contains one or more unverified SSDs.</span> Using unverified SSDs may affect system reliability and stability. You can check <span class="bold-font">Cache Drive Info</span> to identify the unverified SSDs. Then, repair the SSD cache after deactivating and replacing one unverified SSD at a time. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
lun_cache_crashed_can_reassemble_suggestion	=	"<span class="red-status">SSD Cache {0} on LUN ({1}) has crashed.</span> Click <a class="link-font re-assemble-link" href="#">Online Assemble</a> to reassemble the storage pool and regain access to your data."
lun_cache_crashed_can_reassemble_suggestion_multiple	=	"<span class="red-status">SSD Cache {0} on LUN ({1}) has crashed.</span> Click <a class="link-font re-assemble-link" href="#">Online Assemble</a> to reassemble the storage pool and regain access to your data."
lun_cache_crashed_drive_not_enough_suggestion	=	"<span class="red-status">SSD Cache {0} on LUN ({1}) has crashed.</span> The number of drives installed for the SSD cache is insufficient. Please check the drive connection status or refer to <b>Required Drive Info</b> below to find out which drive is required and install it back in your _DISKSTATION_."
lun_cache_crashed_drive_not_enough_suggestion_multiple	=	"<span class="red-status">SSD Cache {0} on LUN ({1}) has crashed.</span> The number of drives installed for the SSD cache is insufficient. Please check the drive connection status or refer to <b>Required Drive Info</b> below to find which drives are required and install them back in your _DISKSTATION_."
lun_cache_degrade_read_only_desc	=	"<span class="orange-status">SSD Cache {0} on LUN ({1}) has degraded, but data are still accessible because the SSD cache is read-only.</span> Please refer to <b>Cache Drive Info</b> below to find the defective SSD and replace it. Afterward, go to SSD Cache {0} and click <div class="sm-pool-sug-more-btn-img"></div> > <b>Repair</b> to repair this SSD cache."
lun_cache_degrade_read_only_desc_multiple	=	"<span class="orange-status">SSD Cache {0} on LUN ({1}) has degraded, but data are still accessible because the SSD cache is read-only.</span> Please refer to <b>Cache Drive Info</b> below to find the defective SSDs and replace them. Afterward, go to SSD Cache {0} and click <div class="sm-pool-sug-more-btn-img"></div> > <b>Repair</b> to repair this SSD cache."
lun_cache_degraded_desc	=	"<span class="red-status">SSD Cache {0} on LUN ({1}) has degraded.</span> Automatic Protection Mechanism is not yet enabled because this SSD cache is still protected by redundancy. The I/O acceleration feature of this SSD cache is still operable. Although the data in this SSD cache are still protected, we still recommend referring to <b>Cache Drive Info</b> below to find the defective SSD and replace it. Afterward, go to SSD Cache {0} and click <div class="sm-pool-sug-more-btn-img"></div> > <b>Repair</b> to repair this SSD cache."
lun_cache_degraded_desc_multiple	=	"<span class="red-status">SSD Cache {0} on LUN ({1}) has degraded.</span> Automatic Protection Mechanism is not yet enabled because this SSD cache is still protected by redundancy. The I/O acceleration feature of this SSD cache is still operable. Although the data in this SSD cache are still protected, we still recommend referring to <b>Cache Drive Info</b> below to find the defective SSDs and replace them. Afterward, go to SSD Cache {0} and click <div class="sm-pool-sug-more-btn-img"></div> > <b>Repair</b> to repair this SSD cache."
lun_cache_degraded_with_apm_desc	=	"<span class="red-status">SSD Cache {0} on LUN ({1}) has degraded.</span> Automatic Protection Mechanism is enabled and the I/O acceleration feature of this SSD cache is therefore disabled. Because the data in this SSD cache may not be protected, please refer to <b>Cache Drive Info</b> below to find the defective SSD and replace it. Afterward, go to SSD Cache {0} and click <div class="sm-pool-sug-more-btn-img"></div> > <b>Repair</b> to repair this SSD cache."
lun_cache_degraded_with_apm_desc_multiple	=	"<span class="red-status">SSD Cache {0} on LUN ({1}) has degraded.</span> Automatic Protection Mechanism is enabled and the I/O acceleration feature of this SSD cache is therefore disabled. Because the data in this SSD cache may not be protected, please refer to <b>Cache Drive Info</b> below to find the defective SSDs and replace them. Afterward, go to SSD Cache {0} and click <div class="sm-pool-sug-more-btn-img"></div> > <b>Repair</b> to repair this SSD cache."
lun_cache_degraded_with_apm_sync_done_desc	=	"<span class="orange-status">SSD Cache {0} on LUN ({1}) has degraded, but data have been synced.</span> Automatic Protection Mechanism has synced all data in the SSD cache to the corresponding LUN. The I/O acceleration feature of this SSD cache is disabled for data safety. Please refer to <b>Cache Drive Info</b> below to find the defective SSD and replace it. Afterward, go to SSD Cache {0} and click <div class="sm-pool-sug-more-btn-img"></div> > <b>Repair</b> to repair this SSD cache."
lun_cache_degraded_with_apm_sync_done_desc_multiple	=	"<span class="red-status">SSD Cache {0} on LUN ({1}) has degraded.</span> Automatic Protection Mechanism has synced all data in the SSD cache to the corresponding LUN. The I/O acceleration feature of this SSD cache is disabled for data safety. Please refer to <b>Cache Drive Info</b> below to find the defective SSDs and replace them. Afterward, go to SSD Cache {0} and click <div class="sm-pool-sug-more-btn-img"></div> > <b>Repair</b> to repair this SSD cache."
lun_cache_disk_loc_mismatch	=	"<span class="red-status">Some SSDs for SSD Cache {0} on LUN ({1}) are placed in different slots on the active and passive servers.</span> Go to the Overview page and check the Drive Information of the active server (the "Show hot spare/SSD cache" option needs to be ticked). Shut down the passive server and then relocate its SSDs to match up with the active server's drive positions."
lun_cache_disk_need_dsmupdate_suggestion	=	"<span class="orange-status">SSD Cache {0} on LUN ({1}) contains one or more SSDs that require you to update _OSNAME_.</span> To continue using these SSDs, go to <span class="sm-font-bold">Control Panel</span> > <span class="sm-font-bold">Update & Restore</span> > <span class="sm-font-bold">_OSNAME_ Update</span> to update _OSNAME_. For more information, check the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">Compatibility List</a>."
lun_cache_disk_need_fwupgrade_suggestion	=	"<span class="orange-status">SSD Cache {0} on LUN ({1}) contains one or more SSDs that require a firmware update.</span> To continue using these SSDs, go to <span class="sm-font-bold">HDD/SSD</span> > <span class="sm-font-bold">Action</span> > <span class="sm-font-bold">Firmware Update</span> to update the drive firmware."
lun_cache_disk_warning_remove_cache_suggestion	=	"<span class="orange-status">An SSD of SSD Cache {0} on LUN ({1}) has entered warning status.</span> This _OSNAME_ version no longer supports creating SSD caches on block-level LUNs. To continue using the block-level LUN, please remove the SSD cache (select SSD Cache {0} > <div class="sm-pool-sug-more-btn-img"></div> > <span class="bold-font">Remove</span>). To use healthy SSDs to create a new SSD cache, please remove the block-level LUN and create a new file-level LUN. Make sure to <a class="link-font" href="https://www.synology.com/knowledgebase/DSM/help/DSM/Tutorial/backup_backup" target="blank">back up</a> your data on the LUN beforehand."
lun_cache_disk_warning_remove_cache_suggestion_multiple	=	"<span class="orange-status">SSDs of SSD Cache {0} on LUN ({1}) have entered warning status.</span> This _OSNAME_ version no longer supports creating SSD caches on block-level LUNs. To continue using the block-level LUN, please remove the SSD cache (select SSD Cache {0} > <div class="sm-pool-sug-more-btn-img"></div> > <span class="bold-font">Remove</span>). To use healthy SSDs to create a new SSD cache, please remove the block-level LUN and create a new file-level LUN. Make sure to <a class="link-font" href="https://www.synology.com/knowledgebase/DSM/help/DSM/Tutorial/backup_backup" target="blank">back up</a> your data on the LUN beforehand."
lun_cache_disk_warning_suggestion	=	"<span class="orange-status">An SSD of SSD Cache {0} on LUN ({1}) has entered warning status.</span> Please check <span class="bold-font">Cache Drive Info</span> to identify the defective SSD. Then, go to <span class="bold-font">HDD/SSD</span> to deactivate and replace the defective SSD before repairing the SSD cache (select SSD Cache {0} > <div class="sm-pool-sug-more-btn-img"></div> > <span class="bold-font">Repair</span>)."
lun_cache_disk_warning_suggestion_multiple	=	"<span class="orange-status">SSDs of SSD Cache {0} on LUN ({1}) have entered warning status.</span> Please check <span class="bold-font">Cache Drive Info</span> to identify the defective SSDs. Then, go to <span class="bold-font">HDD/SSD</span> to deactivate and replace the defective SSDs one at a time before repairing the SSD cache (select SSD Cache {0} > <div class="sm-pool-sug-more-btn-img"></div> > <span class="bold-font">Repair</span>)."
lun_cache_disk_warning_with_apm_suggestion	=	"<span class="orange-status">An SSD of SSD Cache {0} on LUN ({1}) has entered warning status.</span> Please check <span class="bold-font">Cache Drive Info</span> to identify the defective SSD. Then, go to <span class="bold-font">HDD/SSD</span> to deactivate and replace the defective SSD before repairing the SSD cache (select SSD Cache {0} > <div class="sm-pool-sug-more-btn-img"></div> > <span class="bold-font">Repair</span>). The I/O acceleration feature of this SSD cache will be disabled during the repair process."
lun_cache_disk_warning_with_apm_suggestion_multiple	=	"<span class="orange-status">SSDs of SSD Cache {0} on LUN ({1}) have entered warning status.</span> Please check <span class="bold-font">Cache Drive Info</span> to identify the defective SSDs. Then, go to <span class="bold-font">HDD/SSD</span> to deactivate and replace the defective SSDs one at a time before repairing the SSD cache (select SSD Cache {0} > <div class="sm-pool-sug-more-btn-img"></div> > <span class="bold-font">Repair</span>). The I/O acceleration feature of this SSD cache will be disabled during the repair process."
lun_cache_missing_can_reassemble_suggestion	=	"<span class="red-status">SSD Cache {0} on LUN ({1}) is missing.</span> However, a sufficient number of SSD cache drives has been detected. Please click <a class="link-font re-assemble-link" href="#">Online Assemble</a> to assemble the storage pool and then access the data on the drive."
lun_cache_missing_can_reassemble_suggestion_multiple	=	"<span class="red-status">SSD Cache {0} on LUN ({1}) is missing.</span> However, a sufficient number of SSD cache drives has been detected. Please click <a class="link-font re-assemble-link" href="#">Online Assemble</a> to assemble the storage pool and then access the data on the drives."
lun_cache_missing_drive_back_partial_suggestion	=	"<span class="red-status">Undetected SSD in SSD Cache {0} on LUN ({1}).</span> Please check the drive connection status or refer to <b>Cache Drive Info</b> below to find out which SSD is missing and install it back in your _DISKSTATION_. Also, you can simply click <a class="link-font re-assemble-link" href="#">Online Assemble</a> to assemble SSD Cache {0}."
lun_cache_missing_drive_back_partial_suggestion_multiple	=	"<span class="red-status">Undetected SSDs in SSD Cache {0} on LUN ({1}).</span> Please check the drive connection status or refer to <b>Cache Drive Info</b> to find out which SSDs are missing and install them back in your _DISKSTATION_. Also, you can simply click <a class="link-font re-assemble-link" href="#">Online Assemble</a> to assemble SSD Cache {0}."
lun_cache_missing_no_missing_drives_record_suggestion	=	"<span class="red-status">SSD Cache {0} on LUN ({1}) is missing.</span> This may result in file system crash or data loss. Please check the drive connection status or find the missing SSDs and install them back in your _DISKSTATION_."
lun_cache_missing_suggestion	=	"<span class="red-status">SSD Cache {0} on LUN ({1}) is missing.</span> This may result in file system crash or data loss. Please check the drive connection status or refer to <b>Required Drive Info</b> below to find out which drive is required and install it back in your _DISKSTATION_."
lun_cache_missing_suggestion_multiple	=	"<span class="red-status">SSD Cache {0} on LUN ({1}) is missing.</span> This may result in file system crash or data loss. Please check the drive connection status or refer to <b>Required Drive Info</b> below to find out which drives are required and install them back in your _DISKSTATION_."
lun_cache_raid_error_bkp_suggestion	=	"<span class="red-status">Unrecoverable errors have occurred to SSD Cache {0} on LUN ({1}).</span> This is caused by SSD cache degradation and drive errors. Please back up the data in this LUN immediately."
lun_cache_remove_failed_disk_suggestion	=	"SSD Cache {0} on LUN ({1}) has been repaired. Please refer to <b>Cache Drive Info</b> below to find which SSD is defective and remove it, or simply go to the <b>HDD/SSD</b> page, select the defective SSD, and click <b>Action</b> > <b>Deactivate Drive</b> to deactivate it."
lun_cache_remove_failed_disk_suggestion_multiple	=	"SSD Cache {0} on LUN ({1}) has been repaired. Please refer to <b>Cache Drive Info</b> below to find out which SSDs are defective and remove them, or simply go to the <b>HDD/SSD</b> page, select the defective SSDs, and click <b>Action</b> > <b>Deactivate Drive</b> to deactivate them."
lun_cache_ro_safe_missing	=	"<span class="orange-status">SSD Cache {0} on LUN ({1}) is missing.</span> Data are still accessible because the SSD cache is read-only. Check if the SSD is correctly inserted, or refer to <b>Required Drive Info</b> below to identify the required SSD. Reinstall the SSD into your _DISKSTATION_, then restart the system to use this SSD cache. If you no longer need this SSD cache, locate SSD Cache {0} under LUN ({1}), and click <div class="sm-pool-sug-more-btn-img"></div> > <b>Remove</b>."
lun_cache_rw_safe_missing	=	"<span class="orange-status">SSD Cache {0} on LUN ({1}) is missing.</span> Data are still accessible because Automatic Protection Mechanism has synced the data to the corresponding HDD. We recommend going to SSD Cache {0} and clicking <div class="sm-pool-sug-more-btn-img"></div> > <b>Remove</b> to remove this SSD cache."
lun_cache_rw_safe_missing_multiple	=	"<span class="orange-status">SSD Cache {0} on LUN ({1}) is missing.</span> Data are still accessible because Automatic Protection Mechanism has synced the data to the corresponding HDDs. We recommend going to SSD Cache {0} and clicking <div class="sm-pool-sug-more-btn-img"></div> > <b>Remove</b> to remove this SSD cache."
lun_cache_safe_crash_desc	=	"<span class="orange-status">SSD Cache {0} on LUN ({1}) has crashed, but data have been synced.</span> Data are still accessible because Automatic Protection Mechanism has synced the data to the corresponding HDD. However, new data will not be written in this SSD cache. We recommend going to SSD Cache {0} and clicking <div class="sm-pool-sug-more-btn-img"></div> > <b>Remove</b> to remove this SSD cache."
lun_cache_safe_crash_desc_multiple	=	"<span class="orange-status">SSD Cache {0} on LUN ({1}) has crashed, but data have been synced.</span> Data are still accessible because Automatic Protection Mechanism has synced the data to the corresponding HDDs. However, new data will not be written in this SSD cache. We recommend going to SSD Cache {0} and clicking <div class="sm-pool-sug-more-btn-img"></div> > <b>Remove</b> to remove this SSD cache."
lun_cache_unsafe_crash_desc	=	"<span class="red-status">SSD Cache {0} on LUN ({1}) has crashed.</span> Your data may be corrupted. Please back up the data in this LUN immediately."
lun_contains_acceptable_drive_suggestions	=	"SSD Cache {0} on LUN ({1}) contains SSDs that are not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">compatibility list</a>. You can identify them on the <span class="bold-font">HDD/SSD</span> page. When adding or replacing drives, consider using compatible drives. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
lun_passive_cache_crash_missing_can_recreate_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): SSD Cache {0} on LUN ({1}) is missing.</span> Click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the SSD cache."
lun_passive_cache_crashed_can_assemble_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): SSD Cache {0} on LUN ({1}) has crashed.</span> However, the number of SSDs installed is sufficient. Click <a class="link-font passive-reassemble-link" {2} href="#">Online Assemble</a> to assemble the SSD cache."
lun_passive_cache_crashed_can_recreate_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): SSD Cache {0} on LUN ({1}) has crashed.</span> Click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the SSD cache."
lun_passive_cache_crashed_recreate_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): SSD Cache {0} on LUN ({1}) has crashed.</span> The system can no longer initiate switchover/auto failover. Make sure this SSD cache has all its SSDs installed in the corresponding drive slots on the passive server. Then, click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the SSD cache."
lun_passive_cache_degraded_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): SSD Cache {0} on LUN ({1}) has degraded.</span> Automatic Protection Mechanism is enabled and the I/O acceleration feature of this SSD cache is therefore disabled. The data in this SSD cache may not be protected. Make sure this SSD cache has all its SSDs installed in the corresponding drive slots on the passive server. Then, click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the SSD cache."
lun_passive_cache_degraded_with_apm_sync_done_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): SSD Cache {0} on LUN ({1}) has degraded, but data have been synced.</span> Automatic Protection Mechanism has synced all data in the SSD cache to the corresponding volume. The I/O acceleration feature of this SSD cache is disabled for data safety. Make sure this SSD cache has all its SSDs installed in the corresponding drive slots on the passive server. Then, click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the SSD cache."
lun_passive_cache_disk_need_fwupgrade_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): SSD Cache {0} on LUN ({1}) contains one or more SSDs that require a firmware update.</span> To continue using these SSDs, go to <span class="sm-font-bold">HDD/SSD</span> > <span class="sm-font-bold">Action</span> > <span class="sm-font-bold">Firmware Update</span> to update the drive firmware."
lun_passive_cache_incompatible_disk_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): SSD Cache {0} on LUN ({1}) has one or more SSDs that are not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">Compatibility List</a>.</span> These SSDs cannot be used and must be replaced immediately. Go to the <span class="bold-font">HDD/SSD</span> page to identify the incompatible or unrecognized SSDs. After replacing them with compatible SSDs, <a class="link-font passive-repair-link" {2} href="#">repair</a> the SSD cache to solve the issue."
lun_passive_cache_missing_can_assemble_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): SSD Cache {0} on LUN ({1}) had one or more missing SSDs, but these SSDs are now detected.</span> To assemble the SSD cache, click <a class="link-font passive-reassemble-link" {2} href="#">Online Assemble</a>."
lun_passive_cache_missing_recreate_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): SSD Cache {0} on LUN ({1}) is missing.</span> The system can no longer initiate switchover/auto failover. Make sure this SSD cache has all its SSDs installed in the corresponding drive slots on the passive server. Then, click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the SSD cache."
lun_passive_cache_not_exist_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): SSD Cache {0} on LUN ({1}) is missing.</span> There might have been a sync issue between the servers. Click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the SSD cache."
lun_passive_cache_permitted_disk_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): SSD Cache {0} on LUN ({1}) contains one or more unverified SSDs.</span> Using unverified SSDs may affect system reliability and stability. You can check the <span class="bold-font">HDD/SSD</span> page to identify the unverified SSDs. After replacing them with compatible SSDs, click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the SSD cache. <a href="https://kb.synology.com/DSM/tutorial/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
lun_passive_cache_ro_crashed_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): SSD Cache {0} on LUN ({1}) has crashed, but data are still accessible because the SSD cache is read-only.</span> Make sure this SSD cache has all its SSDs installed in the corresponding drive slots on the passive server. Then, click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the SSD cache."
lun_passive_cache_ro_degraded_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): SSD Cache {0} on LUN ({1}) has degraded, but data are still accessible because the SSD cache is read-only.</span> Make sure this SSD cache has all its SSDs installed in the corresponding drive slots on the passive server. Then, click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the SSD cache."
lun_passive_cache_ro_missing_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): SSD Cache {0} on LUN ({1}) is missing.</span> Data are still accessible because the SSD cache is read-only. Make sure this SSD cache has all its SSDs installed in the corresponding drive slots on the passive server. Then, click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the SSD cache."
lun_passive_cache_safe_crashed_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): SSD Cache {0} on LUN ({1}) has crashed, but data have been synced.</span> Data are still accessible because Automatic Protection Mechanism has synced the data to the corresponding HDD. However, new data will not be written to this SSD cache. Make sure this SSD cache has all its SSDs installed in the corresponding drive slots on the passive server. Then, click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the SSD cache."
lun_passive_cache_safe_missing_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): SSD Cache {0} on LUN ({1}) is missing.</span> Data are still accessible because Automatic Protection Mechanism has synced the data to the corresponding HDD. Make sure this SSD cache has all its SSDs installed in the corresponding drive slots on the passive server. Then, click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the SSD cache."
lun_passive_cache_unhealthy_repair_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): SSD Cache {0} on LUN ({1}) contains one or more SSDs in warning status.</span> Go to the <span class="bold-font">HDD/SSD</span> page to identify the defective SSDs on the passive server. Deactivate (<span class="bold-font">Action</span> > <span class="bold-font">Deactivate Drive</span>) and replace the SSDs one at a time. After each replacement, click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the SSD cache."
lun_passive_cache_unverified_disk_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): SSD Cache {0} on LUN ({1}) contains one or more unverified SSDs.</span> Using unverified SSDs may affect system reliability and stability. You can check the <span class="bold-font">HDD/SSD</span> page to identify the unverified SSDs. After replacing them with compatible SSDs, click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the SSD cache. <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">Learn more</a>"
lun_passive_contains_acceptable_drive_suggestions	=	"%PassiveHost% (passive server): SSD Cache {0} on LUN ({1}) contains SSDs that are not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">compatibility list</a>. You can identify them on the <span class="bold-font">HDD/SSD</span> page. When adding or replacing drives, consider using compatible drives. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
lun_space_reclaim_info_desc	=	"After deleting legacy advanced LUN, the space reclamation will run in the background and its speed is under the influence of processing read/write operations."
lun_space_reclaim_progress	=	"Reclaiming"
managed_by	=	"Managed by"
managed_by_controller_i	=	"Managed by Controller {0}"
metadata_cache_enable	=	"Pin all Btrfs metadata to SSD cache"
metadata_cache_enable_desc	=	"Enable this feature to enhance the performance of small-file access and response time of files that are periodically re-written, especially in Active Backup, Hyper Backup, or snapshot-related operations. Please note that this feature requires more cache capacity."
metadata_cache_hot_data_size	=	"Hot data size"
metadata_cache_metadata_size	=	"Metadata size"
metadata_cache_preload_progress	=	"Pinning metadata to SSD cache"
metadata_cache_ssd_cache_size	=	"SSD cache size"
metadata_cache_warning_recheck	=	"We recommend you to perform SSD Cache Advisor again before deciding whether to enable this option. Because of the size limit of this SSD cache, the hot data on this cache may need to be flushed to the HDD first before the metadata can be pinned to this cache. Flushing the hot data may affect the system performance. Are you sure you want to enable this option?"
metadata_cache_warning_size	=	"Because of the size limit of this SSD cache, the hot data on this cache may need to be flushed to the HDD first before the metadata can be pinned to this cache. Flushing the hot data may affect the system performance. Are you sure you want to enable this option?"
min_raid_disk_number	=	"Minimum number of drives per RAID"
min_raid_disk_number_not_met_plural	=	"This RAID Type requires {0} available drive."
modify_size	=	"Modify Size"
modify_size_desc	=	"You can modify the allocated size if the volume is created on a storage pool that supports multiple volumes."
monthly	=	"Monthly"
never	=	"Never"
no_limitation	=	"No limit"
no_pool_available_for_vol_desc_new	=	"No available storage pools for creating a new volume."
no_pool_available_on_passive_for_vol_desc_new	=	"No available storage pools on the passive server for creating a new volume."
no_volumes	=	"No volumes"
not_allow_hybrid_hdd	=	"You cannot create a RAID consisting of 4K native and non-4K native drives at the same time."
not_calculated_yet	=	"Not calculated yet"
not_optimized_suggestion	=	"<span class="orange-status">This storage pool is not optimized.</span> Please run data scrubbing to ensure data consistency."
notice	=	"Note"
others	=	"Others"
overview_desc	=	"Displays the overall status of storage spaces, as well as the overall health of all spaces, drive utilization, volume usage, and LUN usage."
overview_vol_ro_desc	=	"One or more volumes have become read-only. We recommend rescuing your data by copying the files or running a backup task."
passive_alloc_cache_not_exist_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): An SSD cache on Volume {1} is missing.</span> There might have been a sync issue between the servers. Click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the SSD cache."
passive_cache_contains_acceptable_drive_suggestion	=	"%PassiveHost% (passive server): SSD Cache {0} on Volume {1} contains SSDs that are not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">compatibility list</a>. You can identify them on the <span class="bold-font">HDD/SSD</span> page. When adding or replacing drives, consider using compatible drives. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
passive_cache_crash_missing_can_recreate_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): SSD Cache {0} on Volume {1} is missing.</span> Click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the SSD cache."
passive_cache_crashed_can_assemble_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): SSD Cache {0} on Volume {1} has crashed.</span> However, the number of SSDs installed is sufficient. Click <a class="link-font passive-reassemble-link" {2} href="#">Online Assemble</a> to assemble the SSD cache."
passive_cache_crashed_can_recreate_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): SSD Cache {0} on Volume {1} has crashed.</span> Click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the SSD cache."
passive_cache_crashed_recreate_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): SSD Cache {0} on Volume {1} has crashed.</span> The system can no longer initiate switchover/auto failover. Make sure this SSD cache has all its SSDs installed in the corresponding drive slots on the passive server. Then, click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the SSD cache."
passive_cache_degraded_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): SSD Cache {0} on Volume {1} has degraded.</span> Automatic Protection Mechanism is enabled and the I/O acceleration feature of this SSD cache is therefore disabled. The data in this SSD cache may not be protected. Make sure this SSD cache has all its SSDs installed in the corresponding drive slots on the passive server. Then, click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the SSD cache."
passive_cache_degraded_with_apm_sync_done_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): SSD Cache {0} on Volume {1} has degraded, but data have been synced.</span> Automatic Protection Mechanism has synced all data in the SSD cache to the corresponding volume. The I/O acceleration feature of this SSD cache is disabled for data safety. Make sure this SSD cache has all its SSDs installed in the corresponding drive slots on the passive server. Then, click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the SSD cache."
passive_cache_disk_need_dsmupdate_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): SSD Cache {0} on Volume {1} contains one or more SSDs that require you to update _OSNAME_.</span> To continue using these SSDs, go to <span class="sm-font-bold">Control Panel</span> > <span class="sm-font-bold">Update & Restore</span> > <span class="sm-font-bold">_OSNAME_ Update</span> to update _OSNAME_. For more information, check the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">Compatibility List</a>."
passive_cache_disk_need_fwupgrade_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): SSD Cache {0} on Volume {1} contains one or more SSDs that require a firmware update.</span> To continue using these SSDs, go to <span class="sm-font-bold">HDD/SSD</span> > <span class="sm-font-bold">Action</span> > <span class="sm-font-bold">Firmware Update</span> to update the drive firmware."
passive_cache_incompatible_disk_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): SSD cache on Volume {1} has one or more SSDs that are not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">Compatibility List</a>.</span> These SSDs cannot be used and must be replaced immediately. Go to the <span class="bold-font">HDD/SSD</span> page to identify the incompatible or unrecognized SSDs. After replacing them with compatible SSDs, <a class="link-font passive-repair-link" {2} href="#">repair</a> the SSD cache to solve the issue."
passive_cache_missing_can_assemble_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): SSD Cache {0} on Volume {1} had one or more missing SSDs, but these SSDs are now detected.</span> To assemble the SSD cache, click <a class="link-font passive-reassemble-link" {2} href="#">Online Assemble</a>."
passive_cache_missing_recreate_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): SSD Cache {0} on Volume {1} is missing.</span> The system can no longer initiate switchover/auto failover. Make sure this SSD cache has all its SSDs installed in the corresponding drive slots on the passive server. Then, click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the SSD cache."
passive_cache_not_exist_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): SSD Cache {0} on Volume {1} is missing.</span> There might have been a sync issue between the servers. Click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the SSD cache."
passive_cache_permitted_disk_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): SSD Cache {0} on Volume {1} contains one or more unverified SSDs.</span> Using unverified SSDs may affect system reliability and stability. You can check the <span class="bold-font">HDD/SSD</span> page to identify the unverified SSDs. After replacing them with compatible SSDs, click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the SSD cache. <a href="https://kb.synology.com/DSM/tutorial/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
passive_cache_ro_crashed_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): SSD Cache {0} on Volume {1} has crashed, but data are still accessible because the SSD cache is read-only.</span> Make sure this SSD cache has all its SSDs installed in the corresponding drive slots on the passive server. Then, click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the SSD cache."
passive_cache_ro_degraded_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): SSD Cache {0} on Volume {1} has degraded, but data are still accessible because the SSD cache is read-only.</span> Make sure this SSD cache has all its SSDs installed in the corresponding drive slots on the passive server. Then, click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the SSD cache."
passive_cache_ro_missing_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): SSD Cache {0} on Volume {1} is missing.</span> Data are still accessible because the SSD cache is read-only. Make sure this SSD cache has all its SSDs installed in the corresponding drive slots on the passive server. Then, click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the SSD cache."
passive_cache_safe_crashed_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): SSD Cache {0} on Volume {1} has crashed, but data have been synced.</span> Data are still accessible because Automatic Protection Mechanism has synced the data to the corresponding HDD. However, new data will not be written to this SSD cache. Make sure this SSD cache has all its SSDs installed in the corresponding drive slots on the passive server. Then, click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the SSD cache."
passive_cache_safe_missing_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): SSD Cache {0} on Volume {1} is missing.</span> Data are still accessible because Automatic Protection Mechanism has synced the data to the corresponding HDD. Make sure this SSD cache has all its SSDs installed in the corresponding drive slots on the passive server. Click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the SSD cache."
passive_cache_unhealthy_repair_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): SSD Cache {0} on Volume {1} contains one or more SSDs in warning status.</span> Go to the <span class="bold-font">HDD/SSD</span> page to identify the defective SSDs on the passive server. Deactivate (<span class="bold-font">Action</span> > <span class="bold-font">Deactivate Drive</span>) and replace the SSDs one at a time. After each replacement, click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the SSD cache."
passive_cache_unverified_disk_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): SSD Cache {0} on Volume {1} contains one or more unverified SSDs.</span> Using unverified SSDs may affect system reliability and stability. You can check the <span class="bold-font">HDD/SSD</span> page to identify the unverified SSDs. After replacing them with compatible SSDs, click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the SSD cache. <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">Learn more</a>"
passive_lun_cache_disk_need_dsmupdate_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): SSD Cache {0} on LUN ({1}) contains one or more SSDs that require you to update _OSNAME_.</span> To continue using these SSDs, go to <span class="sm-font-bold">Control Panel</span> > <span class="sm-font-bold">Update & Restore</span> > <span class="sm-font-bold">_OSNAME_ Update</span> to update _OSNAME_. For more information, check the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">Compatibility List</a>."
passive_lun_not_exist_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): LUN ({0}) is missing.</span> There might have been a sync issue between the servers. Click <a class="link-font passive-repair-link" {1} href="#">repair</a> to repair the LUN."
passive_shared_cache_acceptable_drive_suggestions	=	"%PassiveHost% (passive server): SSD Cache Group {0} contains SSDs that are not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">compatibility list</a>. You can identify them on the <span class="bold-font">HDD/SSD</span> page. When adding or replacing drives, consider using compatible drives. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
passive_shared_cache_crash_missing_can_recreate_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): SSD Cache Group {0} is missing.</span> Click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the cache group."
passive_shared_cache_crashed_can_assemble_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): SSD Cache Group {0} has crashed.</span> However, the number of SSDs installed is sufficient. To assemble the cache group, restart the passive server."
passive_shared_cache_crashed_can_recreate_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): SSD Cache Group {0} has crashed.</span> Click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the cache group."
passive_shared_cache_crashed_recreate_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): one or more SSD caches from SSD Cache Group {0} have crashed. The system can no longer initiate switchover/auto failover.</span> Make sure the number and placement of the SSDs in this cache group are identical to the active server. Then, click <a class="link-font passive-repair-link" {2} href="#">repair</a> to initiate repair."
passive_shared_cache_degraded_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): SSD Cache Group {0} has degraded.</span> Make sure this cache group has all its SSDs installed in the corresponding drive slots on the passive server. Then, click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the cache group."
passive_shared_cache_degraded_with_apm_sync_done_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): SSD Cache Group {0} has degraded, but data have been synced.</span> Automatic Protection Mechanism has synced all data in the cache group to the corresponding volumes. The I/O acceleration feature of this cache group is disabled for data safety. Make sure this cache group has all its SSDs installed in the corresponding drive slots on the passive server. Then, click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the cache group."
passive_shared_cache_disk_need_dsmupdate_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): SSD Cache Group {0} contains one or more SSDs that require you to update _OSNAME_.</span> To continue using these SSDs, go to <span class="sm-font-bold">Control Panel</span> > <span class="sm-font-bold">Update & Restore</span> > <span class="sm-font-bold">_OSNAME_ Update</span> to update _OSNAME_. For more information, check the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">Compatibility List</a>."
passive_shared_cache_disk_need_fwupgrade_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): SSD Cache Group {0} contains one or more SSDs that require a firmware update.</span> To continue using these SSDs, go to <span class="sm-font-bold">HDD/SSD</span> > <span class="sm-font-bold">Action</span> > <span class="sm-font-bold">Firmware Update</span> to update the drive firmware."
passive_shared_cache_incompatible_disk_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): SSD Cache Group {0} has one or more SSDs that are not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">Compatibility List</a>.</span> These SSDs cannot be used and must be replaced immediately. Go to the <span class="bold-font">HDD/SSD</span> page to identify the incompatible or unrecognized SSDs. After replacing them with compatible SSDs, <a class="link-font passive-repair-link" {2} href="#">repair</a> the SSD cache to solve the issue. <a href="https://kb.synology.com/DSM/tutorial/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
passive_shared_cache_missing_can_assemble_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): SSD Cache Group {0} is missing.</span> To assemble the cache group, go to Synology High Availability and restart the passive server."
passive_shared_cache_missing_recreate_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): SSD Cache Group {0} is missing.</span> The system can no longer initiate switchover/auto failover. Make sure this cache group has all its SSDs installed in the corresponding drive slots on the passive server. Then, click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the cache group."
passive_shared_cache_not_exist_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): SSD Cache Group {0} is missing.</span> There might have been a sync issue between the servers. Click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the SSD cache group."
passive_shared_cache_permitted_disk_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): SSD Cache Group {0} contains one or more unverified SSDs.</span> Using unverified SSDs may affect system reliability and stability. You can check the <span class="bold-font">HDD/SSD</span> page to identify the unverified SSDs. After replacing them with compatible SSDs, click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the cache group. <a href="https://kb.synology.com/DSM/tutorial/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
passive_shared_cache_ro_crashed_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): one or more SSD caches from SSD Cache Group {0} have crashed, but data are still accessible because only read-only caches use the cache group capacity.</span> Make sure the number and placement of the SSDs in this cache group are identical to the active server. Then, click <a class="link-font passive-repair-link" {2} href="#">repair</a> to initiate repair."
passive_shared_cache_ro_degraded_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): SSD Cache Group {0} has degraded, but data are still accessible because only SSD read-only caches use the cache group capacity.</span> Make sure this cache group has all its SSDs installed in the corresponding drive slots on the passive server. Then, click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the cache group."
passive_shared_cache_ro_missing_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): SSD Cache Group {0} is missing.</span> Data are still accessible because the SSD cache is read-only. Make sure this cache group has all its SSDs installed in the corresponding drive slots on the passive server. Then, click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the cache group."
passive_shared_cache_safe_crashed_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): one or more SSD caches from SSD Cache Group {0} have crashed, but data have been synced.</span> Data are still accessible because Automatic Protection Mechanism has synced the data to the corresponding volumes. However, no new data will be written to this cache group. Make sure the number and placement of the SSDs in this cache group are identical to the active server. Then, click <a class="link-font passive-repair-link" {2} href="#">repair</a> to initiate repair."
passive_shared_cache_safe_missing_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): SSD Cache Group {0} is missing.</span> Data are still accessible because Automatic Protection Mechanism has synced the data to the corresponding volumes. Make sure this cache group has all its SSDs installed in the corresponding drive slots on the passive server. Then, click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the cache group."
passive_shared_cache_unhealthy_repair_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): SSD Cache Group {0} contains one or more SSDs in warning status.</span> Go to the <span class="bold-font">HDD/SSD</span> page to identify the defective SSDs on the passive server. Deactivate (<span class="bold-font">Action</span> > <span class="bold-font">Deactivate Drive</span>) and replace the SSDs one at a time. After each replacement, click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the cache group."
passive_shared_cache_unverified_disk_suggestion	=	"<span class="orange-status">%PassiveHost% (passive server): SSD Cache Group {0} contains one or more unverified SSDs.</span> Using unverified SSDs may affect system reliability and stability. You can check the <span class="bold-font">HDD/SSD</span> page to identify the unverified SSDs. After replacing them with compatible SSDs, click <a class="link-font passive-repair-link" {2} href="#">repair</a> to repair the cache group. <a href="https://kb.synology.com/DSM/tutorial/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
passive_volume_not_exist_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): Volume {0} is missing.</span> There might have been a sync issue between the servers. Click <a class="link-font passive-repair-link" {1} href="#">repair</a> to repair the volume."
passive_volume_ro_suggestion	=	"<span class="red-status">%PassiveHost% (passive server): Volume {0} has become read-only.</span> A file system error might have occurred. Click <a class="link-font passive-repair-link" {1} href="#">repair</a> to repair the volume."
performance_degraded	=	"Parity Consistency Check is currently running on {0} and may affect overall system performance."
performance_may_degraded	=	"System is now busy, and the overall system performance may be affected."
peta_volume_desc	=	"The Btrfs (Peta Volume) file system supports a maximum single volume size of 1 PB, making it suitable for large volume creation or volume expansion to over 200 TB. <a href="https://sy.to/peta" target="_blank">Learn more about Btrfs (Peta Volume) and supported packages/services</a>"
peta_volume_feature_support	=	"Btrfs (Peta Volume)"
peta_volume_feature_support_condition	=	"Volumes using the Btrfs (Peta Volume) file system can only be created on a RAID 6 storage pool."
peta_volume_requirement_desc	=	"You can create a volume of up to 1 PB on _DISKSTATION_ when the following requirements are met:"
peta_volume_requirement_memory	=	"A memory size of 64 GB is required to create a volume of up to 1 PB on _DISKSTATION_."
peta_volume_requirement_raid_disk_count	=	"Maximum number of drives per RAID: 12 or less drives"
peta_volume_requirement_raid_type	=	"RAID type: RAID 6"
pool_assemble_fail_suggestion	=	"<span class="red-status">This storage pool cannot be assembled online.</span> Ensure all drives belonging to this storage pool are properly installed, then restart the system, and try to online assemble again. <a href="https://sy.to/assemblefailed" target="blank">Learn more</a>"
pool_desc	=	"Storage pool description"
pool_detected_suggestion	=	"This storage pool is currently inaccessible. Because a sufficient number of drives have been detected, you can now click <div class="sm-pool-sug-more-btn-img"></div> > <b>Online Assemble</b> to assemble this storage pool while the system remains powered on. If you no longer need this storage pool, please click <div class="sm-pool-sug-more-btn-img"></div> > <b>Remove</b> to remove it and then create a new one."
pool_detected_unsupported_cache_suggestion	=	"This storage pool contains at least one volume mounted with an SSD cache; however, your _DISKSTATION_ does not support SSD cache. Please remove the drives that comprise this storage pool. Then, insert them into a _DISKSTATION_ model that supports this feature and assemble the storage pool."
pool_disk_source	=	"Drive source"
pool_raid_desc	=	"{0} Description:"
pool_single_volume_disk_number_limit_note	=	"The maximum number of supported drives is 24"
pool_single_volume_size_limit_note	=	"The maximum volume capacity of this model is 16 TB. The drive space may not be fully used because this type of storage pool only supports single volume."
pool_support_multiple_volume	=	"This type of storage pool supports multiple volumes, allowing higher flexibility in space allocation."
pool_support_raid_group	=	"Supports RAID Group."
pool_support_shr	=	"Supports Synology Hybrid RAID."
pool_support_single_volume	=	"This type of storage pool supports only a single volume but provides better performance."
pool_type_for_flexibility	=	"Higher flexibility"
pool_type_for_performance	=	"Better performance"
pool_type_step_description	=	"Please select the type of storage pool you want to create. You can create a RAID on either type."
pool_with_abnormal_disks	=	"Information of the drives in abnormal status is shown below:"
prop_optinoal	=	"(optional)"
quota_update_volume_status	=	"Scanning the file system"
raid10_constrain	=	"The number of drives in RAID 10 must be in multiples of two."
raid_desc	=	"Combine hard drives and create Disk Groups for more flexible storage management."
raid_disk_too_many_warning	=	"There will be higher risks because the number of drives in a single RAID exceeds {0}. Are you sure you want to continue"
raid_force_data_scrubbing	=	"The RAID has been reassembled. To ensure data consistency, system will perform data scrubbing to the corresponding storage pool immediately."
raid_force_data_scrubbing_note	=	"<font class="note-font"><b>Note:</b></font> When data scrubbing is completed, we will automatically notify you to reboot your _DISKSTATION_ and then run a full scan of the file system. If you reboot or shut down your _DISKSTATION_ before data scrubbing is finished, the system will not be able to run a full scan of the file system."
raid_force_fsck	=	"The RAID has been reassembled. We suggest you run a full scan of the file system. It will stop all services and reboot. Once the operation is completed, we suggest you perform RAID scrubbing to ensure data integrity."
raid_force_notification	=	"Notification of RAID assembly"
raid_force_notification_note	=	"<font class="note-font"><b>Note: </b></font>The scanning process may take a while (approximately 25 minutes for a 1 TB drive), during which you can use Synology Assistant to monitor or cancel the process."
raid_force_notification_reboot	=	"The RAID has been reassembled. Do you want to run a full scan of your drive and repair it after the reboot?"
raid_group_feature	=	"RAID Group feature"
raid_group_feature_info	=	"While a single RAID has a restriction on the drive number, the RAID Group feature allows your storage block to be composed of multiple RAIDs, thus increasing its capacity and drive redundancy. RAID Group is supported by RAID 5, RAID 6, and RAID F1."
raid_type_change_desc	=	"Only certain RAID types can be changed to other RAID types. <a class="link-font sm-show-pointer-cursor" href="#">Learn more</a>"
read_cache_desc	=	"Use two SSDs to create a larger RAID 0 cache to accelerate read speed of a volume or block-level LUN."
read_cache_desc_new	=	"Create a read-only cache to store frequently read data and accelerate the random read speed. No data loss will occur in the event of SSD failure because this cache mode only stores copies of data from the volume."
read_cache_option	=	"Read-only cache"
read_hit_rate	=	"Cache Hit Rate"
read_only_shutdown_warn	=	"One or more volumes are in read-only mode. To prevent data corruption, we recommend backing up the data immediately."
remove_migrated_cache_note	=	"Once the SSD cache is removed, drives migrated from another system can no longer be used in this _DISKSTATION_."
remove_note	=	"Do not shut down the system before the removal is complete."
resource_check_desc	=	"The following items will be removed and cannot be recovered:"
resource_check_desc_eject	=	"This storage pool contains the following items:"
resource_check_title	=	"Remove {0}"
resource_check_title_eject	=	"Safely Eject {0}"
sas_test	=	"SAS Drive Test"
setting_cap_thold_desc	=	"Enter the threshold percentage for available volume capacity. The system will notify you when the available capacity falls below the threshold."
setting_cap_thold_label	=	"Notify when the value is below"
setting_cap_thold_title	=	"Low Capacity Notification"
shared_cache	=	"SSD Cache Group"
shared_cache_acceptable_drive_suggestions	=	"SSD Cache Group {0} contains SSDs that are not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">compatibility list</a>. You can identify them on the <span class="bold-font">HDD/SSD</span> page. When adding or replacing drives, consider using compatible drives. <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
shared_cache_add_drive	=	"Adding drives to SSD cache group"
shared_cache_add_drive_btn	=	"Add Drive"
shared_cache_add_drive_wizard_title	=	"Add Drive to SSD Cache Group"
shared_cache_add_mirror	=	"Add mirror drives to RAID 1"
shared_cache_alert_abnormal	=	"The SSD cache group is in an abnormal status. Go to the Storage page and check the suggestions under the corresponding storage pool."
shared_cache_alert_abnormal_passive	=	"The SSD cache group is in an abnormal status on the passive server. Go to the Storage page and check the suggestions under the corresponding storage pool."
shared_cache_alloc_free_size	=	"{0} allocated | {1} free"
shared_cache_apm_crash_sync_success_desc	=	"Data in this SSD cache have been synced to the corresponding volume, allowing you to still access the data."
shared_cache_apm_degrade_sync_done_desc	=	"The I/O acceleration feature of this SSD cache group has been disabled, and the cached data have been synced to the corresponding volumes."
shared_cache_apm_degrade_sync_progress_desc	=	"The I/O acceleration feature of this SSD cache group has been disabled, and the cached data are being synced to the corresponding volumes. After syncing is complete, your data will remain accessible even if the cache group crashes."
shared_cache_apm_sync_fail_desc	=	"Only partial data in this SSD cache are synced to the corresponding volume. Data on the volume may be damaged."
shared_cache_cached_read_only_desc	=	"<span class="orange-status">One or more SSD caches from SSD Cache Group {0} have crashed, but data are still accessible because only read-only caches use the cache group capacity.</span> We recommend removing all SSD caches that belong to this cache group and then creating a new cache group. This action will not affect your data."
shared_cache_change_raid_type_action	=	"Change {0} to {1}"
shared_cache_change_raid_type_btn	=	"Change RAID Type"
shared_cache_change_raid_type_desc	=	"You can change the RAID type of an SSD cache group without removing existing SSD caches. Select the RAID type that you want to change to."
shared_cache_change_raid_type_wizard_title	=	"Change RAID Type"
shared_cache_changing_raid_type	=	"Changing RAID type for SSD cache group"
shared_cache_confirm_ssd_data_remove	=	"I understand all unmounted SSD caches on the selected SSD cache group will be permanently deleted and cannot be recovered"
shared_cache_contains_incompatible_drive_remove_cache_suggestion	=	"<span class="red-status">SSD Cache Group {0} has one or more SSDs that are not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">Compatibility List</a>.</span> These SSDs cannot be used and must be replaced immediately. Check <span class="bold-font">SSD Cache Group</span> to identify the incompatible or unrecognized SSDs. Remove all SSD caches that allocate capacity from this cache group to remove the cache group. Then, replace them with compatible SSDs and create a new cache group. This action will not affect your data. <a href="https://kb.synology.com/DSM/tutorial/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
shared_cache_contains_incompatible_drive_with_apm_suggestion	=	"<span class="red-status">SSD Cache Group {0} has one or more SSDs that are not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">Compatibility List</a>.</span> These SSDs cannot be used and must be replaced immediately. Check <span class="bold-font">SSD Cache Group</span> to identify the incompatible or unrecognized SSDs. If there are available SSDs in your _DISKSTATION_, <a href="https://kb.synology.com/DSM/help/DSM/StorageManager/ssd_cache_replace_drive#b_14" class="link-font" target="_blank">replace drives</a> to solve the issue. If not, deactivate and replace one SSD at a time. Repair the SSD cache each time after replacing an SSD. Repeat this process until all the incompatible or unrecognized SSDs are replaced. The I/O acceleration feature of all SSD read-write caches in this cache group will be disabled during the repair process. <a href="https://kb.synology.com/DSM/tutorial/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
shared_cache_contains_incompatible_drive_without_apm_suggestion	=	"<span class="red-status">SSD Cache Group {0} has one or more SSDs that are not on the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">Compatibility List</a>.</span> These SSDs cannot be used and must be replaced immediately. Check <span class="bold-font">SSD Cache Group</span> to identify the incompatible or unrecognized SSDs. If there are available SSDs in your _DISKSTATION_, <a href="https://kb.synology.com/DSM/help/DSM/StorageManager/ssd_cache_replace_drive#b_14" class="link-font" target="_blank">replace drives</a> to solve the issue. If not, deactivate and replace one SSD at a time. Repair the SSD cache each time after replacing an SSD. Repeat this process until all the incompatible or unrecognized SSDs are replaced. <a href="https://kb.synology.com/DSM/tutorial/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
shared_cache_contains_permitted_drive_remove_cache_suggestion	=	"<span class="orange-status">SSD Cache Group {0} contains one or more unverified SSDs.</span> Using unverified SSDs may affect system reliability and stability. You can check <span class="bold-font">SSD Cache Group</span> to identify the unverified SSDs. Remove all SSD caches that allocate capacity from this cache group to remove the cache group. Then, replace the unverified SSDs and create a new cache group. This action will not affect your data. <a href="https://kb.synology.com/DSM/tutorial/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
shared_cache_contains_permitted_drive_with_apm_suggestion	=	"<span class="orange-status">SSD Cache Group {0} contains one or more unverified SSDs.</span> Using unverified SSDs may affect system reliability and stability. You can check <span class="bold-font">SSD Cache Group</span> to identify the unverified SSDs. Deactivate (<span class="bold-font">HDD/SSD</span> > <span class="bold-font">Action</span> > <span class="bold-font">Deactivate Drive</span>) and replace the unverified SSDs one at a time. After each replacement, return to this page and repair the cache group. The I/O acceleration feature of all SSD read-write caches in this cache group will be disabled during the repair process. <a href="https://kb.synology.com/DSM/tutorial/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
shared_cache_contains_permitted_drive_without_apm_suggestion	=	"<span class="orange-status">SSD Cache Group {0} contains one or more unverified SSDs.</span> Using unverified SSDs may affect system reliability and stability. You can check <span class="bold-font">SSD Cache Group</span> to identify the unverified SSDs. Deactivate (<span class="bold-font">HDD/SSD</span> > <span class="bold-font">Action</span> > <span class="bold-font">Deactivate Drive</span>) and replace the unverified SSDs one at a time. After each replacement, return to this page and repair the cache group. <a href="https://kb.synology.com/DSM/tutorial/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
shared_cache_contains_unverified_drive_remove_cache_suggestion	=	"<span class="orange-status">SSD Cache Group {0} contains one or more unverified SSDs.</span> Using unverified SSDs may affect system reliability and stability. You can check <span class="bold-font">SSD Cache Group</span> to identify the unverified SSDs. Remove all SSD caches that allocate capacity from this cache group to remove the cache group. Then, replace the unverified SSDs and create a new cache group. This action will not affect your data. <a href="https://kb.synology.com/DSM/tutorial/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
shared_cache_contains_unverified_drive_with_apm_suggestion	=	"<span class="orange-status">SSD Cache Group {0} contains one or more unverified SSDs.</span> Using unverified SSDs may affect system reliability and stability. You can check <span class="bold-font">SSD Cache Group</span> to identify the unverified SSDs. Deactivate (<span class="bold-font">HDD/SSD</span> > <span class="bold-font">Action</span> > <span class="bold-font">Deactivate Drive</span>) and replace the unverified SSDs one at a time. After each replacement, return to this page and repair the cache group. The I/O acceleration feature of all SSD read-write caches in this cache group will be disabled during the repair process. <a href="https://kb.synology.com/DSM/tutorial/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
shared_cache_contains_unverified_drive_without_apm_suggestion	=	"<span class="orange-status">SSD Cache Group {0} contains one or more unverified SSDs.</span> Using unverified SSDs may affect system reliability and stability. You can check <span class="bold-font">SSD Cache Group</span> to identify the unverified SSDs. Deactivate (<span class="bold-font">HDD/SSD</span> > <span class="bold-font">Action</span> > <span class="bold-font">Deactivate Drive</span>) and replace the unverified SSDs one at a time. After each replacement, return to this page and repair the cache group. <a href="https://kb.synology.com/DSM/tutorial/Replace_incompatible_unverified_drives_v7" class="link-font" target="_blank">Learn more</a>"
shared_cache_crash_suggestion	=	"<span class="red-status">One or more SSD caches from SSD Cache Group {0} have crashed.</span> Data may be corrupted. Back up all the corresponding volumes. Then, remove these volumes and create new ones."
shared_cache_crashed_can_reassemble_suggestion	=	"<span class="red-status">SSD Cache Group {0} has crashed.</span> Restart the system to reassemble the cache group."
shared_cache_crashed_can_reassemble_suggestion_multiple	=	"<span class="red-status">SSD Cache Group {0} has crashed.</span> Restart the system to assemble the cache group."
shared_cache_crashed_drive_not_enough_suggestion	=	"<span class="red-status">SSD Cache Group {0} has crashed.</span> The number of SSDs installed is insufficient. Check the drive connection status or refer to <span class="bold-font">Required Drive Info</span> to find out which SSD is required and insert it back in your _DISKSTATION_."
shared_cache_crashed_drive_not_enough_suggestion_multiple	=	"<span class="red-status">SSD Cache Group {0} has crashed.</span> The number of SSDs installed is insufficient. Check the drive connection status or refer to <span class="bold-font">Required Drive Info</span> to find out which SSDs are required and insert them back in your _DISKSTATION_."
shared_cache_create_existing_data_warning	=	"The selected SSD cache group contains SSD caches that may not have been properly removed. These caches are now unmounted. If the caches are not synced to the volume where they were each mounted, the data may crash."
shared_cache_cross_warning	=	"Note that the maintenance of the SSD cache group may affect the data in multiple storage pools if these storage pools share a single cache group. Are you sure you want to continue?"
shared_cache_current_drive_not_enough	=	"Insufficient number of available drives to change the RAID type to {0}. Before proceeding, insert at least {1} drive that matches the following criteria."
shared_cache_current_drives_not_enough	=	"Insufficient number of available drives to change the RAID type to {0}. Before proceeding, insert at least {1} drives that match the following criteria."
shared_cache_degrade_read_only_desc	=	"<span class="orange-status">SSD Cache Group {0} has degraded, but it can still accelerate I/O partially because only SSD read-only caches use the cache group capacity.</span> Check <span class="bold-font">SSD Cache Group</span> to identify the defective SSD. After replacing the SSD, click this storage pool's upper-right icon > <span class="bold-font">Manage SSD Cache Group</span> > <span class="bold-font">Repair</span> to repair the cache group."
shared_cache_degrade_read_only_desc_multiple	=	"<span class="orange-status">SSD Cache Group {0} has degraded, but it can still accelerate I/O partially because only SSD read-only caches use the cache group capacity.</span> Check <span class="bold-font">SSD Cache Group</span> to identify the defective SSDs. After replacing the SSDs, click this storage pool's upper-right icon > <span class="bold-font">Manage SSD Cache Group</span> > <span class="bold-font">Repair</span> to repair the cache group."
shared_cache_degraded_not_flush_done	=	"<span class="red-status">SSD Cache Group {0} has degraded.</span> Data in this cache group may not be protected. Check <span class="bold-font">SSD Cache Group</span> to identify the defective SSD. After replacing the SSD, click this storage pool's upper-right icon > <span class="bold-font">Manage SSD Cache Group</span> > <span class="bold-font">Repair</span> to repair the cache group."
shared_cache_degraded_not_flush_done_multiple	=	"<span class="red-status">SSD Cache Group {0} has degraded.</span> Data in this cache group may not be protected. Check <span class="bold-font">SSD Cache Group</span> to identify the defective SSDs. After replacing the SSDs, click this storage pool's upper-right icon > <span class="bold-font">Manage SSD Cache Group</span> > <span class="bold-font">Repair</span> to repair the cache group."
shared_cache_degraded_with_apm_sync_done_desc	=	"<span class="orange-status">SSD Cache Group {0} has degraded, but data have been synced.</span> Automatic Protection Mechanism has synced all data in the cache group to the corresponding volumes. The I/O acceleration feature of this cache group is disabled for data safety. Check <span class="bold-font">SSD Cache Group</span> to identify the defective SSD. After replacing the SSD, click this storage pool's upper-right icon > <span class="bold-font">Manage SSD Cache Group</span> > <span class="bold-font">Repair</span> to repair the cache group."
shared_cache_degraded_with_apm_sync_done_desc_multiple	=	"<span class="orange-status">SSD Cache Group {0} has degraded, but data have been synced.</span> Automatic Protection Mechanism has synced all data in the cache group to the corresponding volumes. The I/O acceleration feature of this cache group is disabled for data safety. Check <span class="bold-font">SSD Cache Group</span> to identify the defective SSDs. After replacing the SSDs, click this storage pool's upper-right icon > <span class="bold-font">Manage SSD Cache Group</span> > <span class="bold-font">Repair</span> to repair the cache group."
shared_cache_disk_loc_mismatch	=	"<span class="red-status">Some SSDs for SSD Cache Group {0} are placed in different slots on the active and passive servers.</span> Go to the Overview page and check the Drive Information of the active server (the "Show hot spare/SSD cache" option needs to be ticked). Shut down the passive server and then relocate its SSDs to match up with the active server's drive positions."
shared_cache_disk_need_dsmupdate_suggestion	=	"<span class="orange-status">SSD Cache Group {0} contains one or more SSDs that require you to update _OSNAME_.</span> To continue using these SSDs, go to <span class="sm-font-bold">Control Panel</span> > <span class="sm-font-bold">Update & Restore</span> > <span class="sm-font-bold">_OSNAME_ Update</span> to update _OSNAME_. For more information, check the <a href="https://www.synology.com/compatibility" class="link-font" target="_blank">Compatibility List</a>."
shared_cache_disk_need_fwupgrade_suggestion	=	"<span class="orange-status">SSD Cache Group {0} contains one or more SSDs that require a firmware update.</span> To continue using these SSDs, go to <span class="sm-font-bold">HDD/SSD</span> > <span class="sm-font-bold">Action</span> > <span class="sm-font-bold">Firmware Update</span> to update the drive firmware."
shared_cache_disk_warning_remove_cache_suggestion	=	"<span class="orange-status">An SSD of SSD Cache Group {0} has entered warning status.</span> Check <span class="bold-font">SSD Cache Group</span> to identify the defective SSD. Remove all SSD caches that allocate capacity from this cache group to remove the cache group. Then, replace the defective SSD and create a new cache group. This action will not affect your data."
shared_cache_disk_warning_remove_cache_suggestion_multiple	=	"<span class="orange-status">SSDs of SSD Cache Group {0} have entered warning status.</span> Check <span class="bold-font">SSD Cache Group</span> to identify the defective SSDs. Remove all SSD caches that allocate capacity from this cache group to remove the cache group. Then, replace the defective SSDs and create a new cache group. This action will not affect your data."
shared_cache_disk_warning_suggestion	=	"<span class="orange-status">An SSD of SSD Cache Group {0} has entered warning status.</span> Check <span class="bold-font">SSD Cache Group</span> to identify the defective SSD. Deactivate (<span class="bold-font">HDD/SSD</span> > <span class="bold-font">Action</span> > <span class="bold-font">Deactivate Drive</span>) and replace the defective SSD. Then, return to this page and repair the cache group."
shared_cache_disk_warning_suggestion_multiple	=	"<span class="orange-status">SSDs of SSD Cache Group {0} have entered warning status.</span> Check <span class="bold-font">SSD Cache Group</span> to identify the defective SSDs. Deactivate (<span class="bold-font">HDD/SSD</span> > <span class="bold-font">Action</span> > <span class="bold-font">Deactivate Drive</span>) and replace the defective SSDs one at a time. After each replacement, return to this page and repair the cache group."
shared_cache_disk_warning_with_apm_suggestion	=	"<span class="orange-status">An SSD of SSD Cache Group {0} has entered warning status.</span> Check <span class="bold-font">SSD Cache Group</span> to identify the defective SSD. Deactivate (<span class="bold-font">HDD/SSD</span> > <span class="bold-font">Action</span> > <span class="bold-font">Deactivate Drive</span>) and replace the defective SSD. Then, return to this page and repair the cache group. The I/O acceleration feature of all SSD read-write caches in this cache group will be disabled during the repair process."
shared_cache_disk_warning_with_apm_suggestion_multiple	=	"<span class="orange-status">SSDs of SSD Cache Group {0} have entered warning status.</span> Check <span class="bold-font">SSD Cache Group</span> to identify the defective SSDs. Deactivate (<span class="bold-font">HDD/SSD</span> > <span class="bold-font">Action</span> > <span class="bold-font">Deactivate Drive</span>) and replace the defective SSDs one at a time. After each replacement, return to this page and repair the cache group. The I/O acceleration feature of all SSD read-write caches in this cache group will be disabled during the repair process."
shared_cache_ebox_internal_mix_warning	=	"If your SSD cache group uses drives from an expansion unit, do not disconnect the expansion unit. Disconnection may cause the cache group and corresponding volumes to crash and result in data loss."
shared_cache_ebox_power_button_disabled	=	"If your SSD cache group uses drives from an expansion unit, you will not be able to power off the expansion unit via its physical power button."
shared_cache_erase_remaining_data	=	"Clear the unmounted SSD caches on the selected SSD cache group?"
shared_cache_expand_by_disk	=	"Add drives to expand the SSD cache group capacity"
shared_cache_has_any_removing_alloc_cache_on_other_pool	=	"Cannot perform this action. The SSD cache group of this storage pool is busy. Try again later."
shared_cache_has_any_removing_alloc_cache_on_other_pool_passive	=	"Cannot perform this action. On the passive server, the SSD cache group of this storage pool is busy. Try again later."
shared_cache_manage_btn	=	"Manage SSD Cache Group"
shared_cache_max_degrade_flush_desc	=	"Enable this feature to stop Automatic Protection Mechanism from activating when the SSD cache group is degraded but still protected by redundancy. For example, if the configured RAID type can withstand 2 SSD failures and only 1 SSD has failed, the protection mechanism will not be activated. This helps minimize the impact on system performance but has a lower level of protection for data."
shared_cache_max_degrade_flush_note	=	"This setting applies to all SSD caches of this SSD cache group, regardless of which storage pool they are located in."
shared_cache_max_degrade_flush_title	=	"Write data back to the corresponding volumes only when the SSD cache group is not protected by redundancy"
shared_cache_missing_can_reassemble_suggestion	=	"<span class="red-status">SSD Cache Group {0} is missing.</span> However, the number of SSDs installed is sufficient. Restart the system to assemble the cache group."
shared_cache_missing_can_reassemble_suggestion_multiple	=	"<span class="red-status">SSD Cache Group {0} is missing.</span> However, the number of SSDs installed is sufficient. Restart the system to assemble the cache group."
shared_cache_missing_drive_back_partial_suggestion	=	"<span class="red-status">Undetected SSD in SSD Cache Group {0}.</span> Check the drive connection status or refer to <span class="bold-font">Required Drive Info</span> to find out which SSD is required and insert it back in your _DISKSTATION_. Restart the system to assemble the cache group."
shared_cache_missing_drive_back_partial_suggestion_multiple	=	"<span class="red-status">Undetected SSDs in SSD Cache Group {0}.</span> Check the drive connection status or refer to <span class="bold-font">Required Drive Info</span> to find out which SSDs are required and insert them back in your _DISKSTATION_. Restart the system to assemble the cache group."
shared_cache_missing_no_missing_drives_record_suggestion	=	"<span class="red-status">SSD Cache Group {0} is missing.</span> This may result in a file system crash or data loss. Check the drive connection status or find the missing SSDs and install them back in your _DISKSTATION_."
shared_cache_missing_suggestion	=	"<span class="red-status">SSD Cache Group {0} is missing.</span> This may result in a file system crash or data loss. Check the drive connection status or refer to <span class="bold-font">Required Drive Info</span> to find out which SSD is required and insert it back in your _DISKSTATION_. Restart the system to assemble the cache group."
shared_cache_missing_suggestion_multiple	=	"<span class="red-status">SSD Cache Group {0} is missing.</span> This may result in a file system crash or data loss. Check the drive connection status or refer to <span class="bold-font">Required Drive Info</span> to find out which SSDs are required and insert them back in your _DISKSTATION_. Restart the system to assemble the cache group."
shared_cache_opt_hcl_compat_check_fail_active_add	=	"SSD Cache Group {0} has one or more drives that are not on the Synology Products Compatibility List. To add drives, make sure all drives in the cache group are compatible."
shared_cache_opt_hcl_compat_check_fail_active_add_fwupgrade	=	"At least one SSD in SSD Cache Group {0} requires a firmware update. Update the firmware immediately and then try again."
shared_cache_opt_hcl_compat_check_fail_active_migrate	=	"SSD Cache Group {0} has one or more drives that are not on the Synology Products Compatibility List. Make sure all drives in the cache group are compatible and then try again."
shared_cache_opt_hcl_compat_check_fail_active_migrate_fwupgrade	=	"At least one drive in SSD Cache Group {0} requires a firmware update. Update the firmware immediately and then try again."
shared_cache_opt_hcl_compat_check_fail_both_add	=	"On both active and passive servers, SSD Cache Group {0} has one or more drives that are not on the Synology Products Compatibility List. To add drives, make sure all drives in the cache groups are compatible."
shared_cache_opt_hcl_compat_check_fail_both_add_fwupgrade	=	"On both the active and passive servers, at least one SSD in SSD Cache Group {0} requires a firmware update. Update the firmware immediately and then try again."
shared_cache_opt_hcl_compat_check_fail_passive_add	=	"On the passive server, SSD Cache Group {0} has one or more drives that are not on the Synology Products Compatibility List. To add drives, make sure all drives in the cache group are compatible."
shared_cache_opt_hcl_compat_check_fail_passive_add_fwupgrade	=	"On the passive server, at least one SSD in SSD Cache Group {0} requires a firmware update. Update the firmware immediately and then try again."
shared_cache_raid_error_bkp_suggestion	=	"<span class="red-status">SSD Cache Group {0} encountered unrecoverable errors.</span> This may be caused by drive errors occurring in addition to cache group degradation. Back up all the corresponding volumes. Then, remove these volumes and create new ones."
shared_cache_reach_limited_disk_number	=	"No more drives can be added. The SSD cache group has reached its maximum number of drives: {0}."
shared_cache_repair_btn	=	"Repair"
shared_cache_replace_action	=	"Replace"
shared_cache_replace_btn	=	"Replace Drive"
shared_cache_replace_choose_new_desc	=	"Select the drive that you want to add to the SSD cache group."
shared_cache_replace_choose_new_title	=	"Select the drive that you want to add"
shared_cache_replace_choose_replaced_desc	=	"Select the drive that you want to remove from the SSD cache group. The selected drive will be removed from the cache group after it has been replaced."
shared_cache_replace_choose_replaced_title	=	"Select the drive that you want to remove"
shared_cache_replace_wizard_title	=	"Replace Drive"
shared_cache_replaced_disk	=	"Replaced drive"
shared_cache_replacing	=	"Replacing drive for SSD cache group"
shared_cache_replacing_disk	=	"Added drive"
shared_cache_ro_safe_missing	=	"<span class="orange-status">SSD Cache Group {0} is missing.</span> Data are still accessible because the SSD cache is read-only. Check if the SSD is correctly inserted, or refer to <b>Required Drive Info</b> below to identify the required SSD. Reinstall the SSD into your _DISKSTATION_, then restart the system to use this SSD cache group. If you no longer need this SSD cache group, remove all SSD caches that allocate capacity from this cache group."
shared_cache_rw_safe_missing	=	"<span class="orange-status">SSD Cache Group {0} is missing.</span> Data are still accessible because Automatic Protection Mechanism has synced the data to the corresponding HDD. We recommend removing all SSD caches that allocate capacity from this cache group and then creating a new cache group."
shared_cache_rw_safe_missing_multiple	=	"<span class="orange-status">SSD Cache Group {0} is missing.</span> Data are still accessible because Automatic Protection Mechanism has synced the data to the corresponding HDDs. We recommend removing all SSD caches that allocate capacity from this cache group and then creating a new cache group."
shared_cache_safe_crash_desc	=	"<span class="orange-status">One or more SSD caches from SSD Cache Group {0} have crashed.</span> Data are still accessible because Automatic Protection Mechanism has synced the data to the corresponding volumes. We recommend removing all the SSD caches that belong to this cache group and then creating a new cache group."
shared_cache_safe_crash_desc_multiple	=	"<span class="orange-status">One or more SSD caches from SSD Cache Group {0} have crashed.</span> Data are still accessible because Automatic Protection Mechanism has synced the data to the corresponding volumes. We recommend removing all the SSD caches that belong to this cache group and then creating a new cache group."
shared_cache_setting_apm_section	=	"Automatic Protection Mechanism for SSD Cache Group"
shared_cache_size	=	"Cache size"
shared_cache_unsafe_crash_desc	=	"<span class="red-status">One or more SSD caches from SSD Cache Group {0} has crashed.</span> Data may be corrupted. To rescue your data, sign in to your <a href="https://account.synology.com/support/" target="blank">Synology Account</a> to submit a technical support ticket."
shared_cache_wizard_replace_choose_replaced_disk_to_continue	=	"Select the drive that you want to remove from the SSD cache group."
shared_cache_wizard_replace_choose_replacing_disk_to_continue	=	"Select the drive that you want to add to the SSD cache group."
shr_one_drive_no_data_protection_info	=	"SHR created with only one drive will not be able to tolerate drive failure."
soft_check_desc	=	"If you choose to continue, the following items may become completely or partially unavailable:"
soft_check_fail	=	"Do you want to ignore the following items and continue the operation?"
soft_check_title	=	"Are you sure you want to remove {0}?"
space_busy	=	"Operations on volumes are in progress"
space_contain_bad_sector_disks	=	"It is detected that the selected drive {0} contains bad sectors, and therefore is more likely to be damaged than drives without bad sectors. Important data may be lost if you choose to proceed. Are you sure you want to continue?"
space_deactivated	=	"Volume is deactivated"
space_missing	=	"Volume is missing"
space_reclaim_panel_desc	=	"The system needs time to reclaim storage space after the deletion of a shared folder, snapshot, or LUN. You can set space reclamation to run during specific hours, thereby preventing it from affecting system performance during important services or tasks. <a class="{0}" id={1} href="#">Learn more</a>"
space_reclaim_panel_msg_has_been_delay	=	"Space reclamation is manually paused until {0} and will be resumed during the next allowed period on the time grid."
space_reclaim_panel_note_btrfs_only	=	"Only Btrfs volumes support the space reclamation feature."
space_reclaim_panel_open_sche_btn	=	"Set Time Grid"
space_reclaim_panel_title	=	"Space Reclamation Schedule"
space_reclaim_panel_updated_toast	=	"Time grid updated"
space_reclaim_time_window_delayed_msg	=	"Space reclamation is manually paused until {0} and will be resumed during the next allowed period."
space_reclaim_time_window_desc	=	"Running space reclamation consumes system resources. You can set space reclamation to run during off-peak hours, thereby preventing it from affecting system performance during important services or tasks."
space_reclaim_time_window_invalid_msg	=	"Select at least one cell and set it as an allowed period for the system to run space reclamation."
space_reclaim_time_window_note	=	"If the system does not complete space reclamation within an allowed period (i.e., the cells in blue), it will automatically pause this operation and resume it on the next allowed one."
space_reclaim_time_window_pause	=	"Pause space reclamation"
space_reclaim_time_window_run	=	"Run space reclamation"
space_reclaim_time_window_title	=	"Set Time Grid"
space_reclaim_tray_confirm_delay_dlg_desc	=	"Space reclamation is manually paused until {0} and will be resumed during the next allowed period on the time grid. Note that after pausing space reclamation, you will not be able to resume it manually. Are you sure you want to pause space reclamation?"
space_reclaim_tray_exec_status_running	=	"Processing"
space_reclaim_tray_item_delay_btn	=	"Pause"
space_reclaim_tray_item_delay_opt_multiple	=	"Stop for {0} hours"
space_reclaim_tray_item_delay_opt_single	=	"Stop for 1 hour"
space_reclaim_tray_item_main_desc	=	"The system is reclaiming storage space from deleted shared folders, snapshots, or LUNs."
space_reclaim_tray_item_remaining	=	"Remaining items:"
space_reclaim_tray_tray_title	=	"Space Reclamation"
space_size_limit_cannot_add_disk	=	"The total volume and block-level LUN capacity cannot exceed {0} on a high-availability cluster. The current total capacity has reached this limit; therefore, the storage pool capacity cannot be expanded by adding drives."
space_size_limit_cannot_create	=	"The total volume and block-level LUN capacity cannot exceed {0} on a high-availability cluster. The current total capacity has reached this limit; therefore, no new volumes can be created."
space_size_limit_cannot_do_operation	=	"The total volume and block-level LUN capacity cannot exceed {0} on a high-availability cluster. The current total capacity has reached this limit."
space_size_limit_cannot_expand_unalloc	=	"The total volume and block-level LUN capacity cannot exceed {0} on a high-availability cluster. The current total capacity has reached this limit; therefore, the storage pool capacity cannot be expanded by clicking "expand now"."
space_size_limit_cannot_proceed	=	"Unable to proceed. The total volume and block-level LUN capacity cannot exceed {0} on a high-availability cluster."
space_size_limit_exceed_create_limit	=	"The total volume and block-level LUN capacity cannot exceed {0} on a high-availability cluster. The remaining volume capacity is {1}."
space_size_limit_exceed_expand_limit	=	"The total volume and block-level LUN capacity cannot exceed {0} on a high-availability cluster. Please make sure the allocated size does not exceed {1} GB."
space_size_limit_repair_cannot_expand	=	"The total volume and block-level LUN capacity cannot exceed {0} on a high-availability cluster. The storage pool capacity cannot be completely used up because this storage pool type only supports a single volume."
spare_cross	=	"Cross-device Hot Spare"
spare_cross_desc	=	"Allow hot spare disks on one device (e.g., _DISKSTATION_ itself or expansion unit-1) to repair the degraded RAID (volumes, LUNs and Disk Groups) on a different device (e.g., expansion unit-2)."
spare_cross_desc_raid_group	=	"Allow hot spare drives on one device (e.g., _DISKSTATION_ itself or expansion unit-1) to repair the degraded storage pool on a different device (e.g., expansion unit-2)."
spare_cross_enable	=	"Allow hot spare drives to perform cross-device repair"
spare_expand_unalloc_desc	=	"To ensure uninterrupted service, the space was not automatically expanded during the last hot spare repair. Please continue this operation to expand the remaining free space."
spare_repair	=	"Repair hot spare"
spare_setting_title	=	"Hot Spare Settings"
spare_trg_desc_raid_group	=	"Select the storage pools to be automatically repaired by hot spare drives when degraded."
ssd_cache	=	"SSD Cache"
ssd_cache_advisor	=	"SSD Cache Advisor"
ssd_cache_attach	=	"Mount"
ssd_cache_cannot_be_swap	=	"SSDs which are used as SSD cache cannot be added to swap."
ssd_cache_cant_repair_is_acting	=	"This SSD cache cannot be repaired because it is processing another task. Please try again after the task is complete."
ssd_cache_check_support	=	"Check compatibility"
ssd_cache_crash_desc	=	"One or more SSD caches are crashed. We recommend rescuing your data by copying the files or running a backup task."
ssd_cache_crash_no_need_backup_desc	=	"One or more SSD caches have crashed. Please go to SSD Cache to learn more."
ssd_cache_deattach	=	"Unmount"
ssd_cache_deattach_confirm	=	"Remove SSD cache from {0}?"
ssd_cache_degrade_desc	=	"One or more SSD caches are degraded. We recommend replacing failing SSDs with healthy ones."
ssd_cache_desc	=	"SSD cache boosts the read performance of a volume or LUN (Block-Level). You can select one of the volumes or LUNs to enable SSD cache. Please refer to Help for more informaiton."
ssd_cache_desc_restrict	=	"You can enable SSD cache on one volume or LUN (Block-Level) to boost its read performance. Please refer to Help for more information.<br>Before enabling SSD cache on a volume, please confirm Time Backup is not enabled."
ssd_cache_desc_short	=	"Combine and mount SSD cache to enhance the performance of some storage spaces."
ssd_cache_flushing	=	"Saving cached data to drives"
ssd_cache_hit_rate_desc	=	"Hit rate refers to the ratio of which the SSD cache is able to fulfill the random I/O requests. A high hit rate indicates that most of the random I/O requests can be accelerated from the cache, thus yielding a lower I/O latency and higher performance."
ssd_cache_info	=	"SSD Cache Info"
ssd_cache_mode	=	"SSD cache mode"
ssd_cache_noatime_notice	=	"<b>Note:</b> The <b>Record File Access Time</b> option in the selected volume has been disabled, and this may cause SSD Cache Advisor to lose its accuracy."
ssd_cache_non_identical	=	"The two SSDs are not of the same model. Please use SSDs with the same model."
ssd_cache_not_support	=	"At least one of the two SSDs is not supported. Please refer to <a href="http://www.synology.com" target="_blank">www.synology.com</a> for compatibility list."
ssd_cache_on	=	"Mount on"
ssd_cache_policy	=	"Policy"
ssd_cache_repair_need_more_disks	=	"Insufficient number of available drives for repairing this SSD cache. Please insert at least {0} more drives matching the following criteria:"
ssd_cache_repair_need_one_more_disk	=	"Insufficient number of available drives for repairing this SSD cache. Please insert at least {0} more drive that matches the following criteria:"
ssd_cache_repair_wizard_title	=	"Repair SSD Cache"
ssd_cache_replace_need_one_more_disk	=	"No available drives to replace the drives in this SSD cache group. Insert at least {0} more drive that matches the following criteria:"
ssd_cache_require_one_more	=	"In order to use SSD caching, you must install a second SSD that is the same model as the installed SSD."
ssd_cache_requirement	=	"Two SSDs of the same model and same size are required to create a SSD cache."
ssd_cache_size_mem_desc	=	"Every 1 GB of SSD cache requires approximately 4 MB of memory. Only 1/4 of the system memory and the unused memory you have expanded can be used for SSD cache."
ssd_cache_size_mem_desc_new2	=	"Approximately 400 KB of system memory is required for every 1 GB of SSD cache."
ssd_cache_size_warning	=	"The system memory configuration can only support {0} SSD cache size."
ssd_cache_static_access_file	=	"File Access Statistics"
ssd_cache_static_cancel	=	"Cancel"
ssd_cache_static_confirm	=	"Apply"
ssd_cache_static_dest	=	"Calculate the total number and size of recently accessed files on a specific volume. This information can be referenced when estimating how much SSD cache is suitable for your system."
ssd_cache_static_executing	=	"Calculating"
ssd_cache_static_last_calculated	=	"Last calculated on {0}"
ssd_cache_static_last_results	=	"Results"
ssd_cache_static_reexecuted	=	"Calculate"
ssd_cache_static_total	=	"Total"
ssd_cache_static_volume	=	"Volume"
ssd_cache_string2	=	"SSD cache"
ssd_cache_suggestion	=	"Please refer to <a href="http://www.synology.com/" target="_blank">www.synology.com</a> for more details regarding SSD cache."
ssd_cache_write_hit_ratio	=	"Hit ratio for data writing"
ssd_device_info	=	"SSD Device Info"
ssd_not_enough_memory	=	"More memory is needed for SSD cache. Please refer to help for more information."
ssd_not_identical	=	"The selected SSDs are not of the same model and size. Please use SSDs of the same model and size."
ssd_not_support_warning	=	"The selected SSDs are not included in our compatibility list. We suggest using compatible SSDs only."
ssd_rw_cache_deattach_confirm	=	"Remove this read-write SSD cache from {0}?"
ssd_rw_cache_remove_confirm	=	"Remove this SSD read-write cache?"
ssd_rw_cache_remove_long_time_warning	=	"Removing read-write cache may take a long time. Please perform this operation at system idle time. "
ssd_suggestion	=	"We suggest consulting the SSD compatibility list on Synology's website and using compatible SSDs."
ssd_trim_disable_pool_trim	=	"An SSD with an unverified TRIM feature was detected in Storage Pool {0}. Because using unverified TRIM could lead to <a href="https://sy.to/ssd_trim_support_verified_drives" target="_blank" class="link-font">data corruption</a>, the system has disabled this feature to maintain stability. To ensure data integrity when using this feature, use SSDs from the <a href="https://www.synology.com/compatibility" target="_blank" class="link-font">compatibility list</a>, as their TRIM feature has been verified."
ssd_trim_disable_volume_trim	=	"An SSD with an unverified TRIM feature was detected in Volume {0}. Because using unverified TRIM could lead to <a href="https://sy.to/ssd_trim_support_verified_drives" target="_blank" class="link-font">data corruption</a>, the system has disabled this feature to maintain stability. To ensure data integrity when using this feature, use SSDs from the <a href="https://www.synology.com/compatibility" target="_blank" class="link-font">compatibility list</a>, as their TRIM feature has been verified."
ssd_trim_disabled_by_backup	=	"SSD TRIM cannot be enabled on this volume currently, because the Time Backup package is installed. To enable SSD TRIM, please remove Time Backup and reboot the system."
ssd_trim_disabled_by_cache	=	"SSD TRIM cannot be enabled on this volume currently, because SSD cache is mounted. To enable SSD TRIM, please unmount the SSD cache."
ssd_trim_disabled_by_ha	=	"SSD TRIM cannot be enabled on this volume currently, because a high-availability cluster has been created with Synology High Availability. To enable SSD TRIM, please remove the cluster."
ssd_trim_en	=	"Enable TRIM"
ssd_trim_not_support_desc	=	"Some of your SSDs do not support TRIM for RAID 5/6."
ssd_trim_title	=	"SSD TRIM"
start_data_scrubbing	=	"Start data scrubbing"
start_data_scrubbing_help	=	"This option searches for and cleans up data inconsistencies."
start_raid_scrubbing	=	"Perform RAID scrubbing"
stat_task_processing_warn	=	"Another calculation task is currently being processed. Please wait and try again later."
status_calculating	=	"Calculating"
storage_allocation	=	"Storage Allocation"
storage_manager	=	"Storage Manager"
storage_manager_bkg_task_tool_tip	=	"Running tasks may temporarily affect system performance."
storage_pool_change_controller	=	"Change controller"
storage_pool_change_controller_comfirm	=	"Do you want to change the controller of storage pool {0} from controller {1} to controller {2}?"
storage_pool_change_controller_move_items	=	"The following items will be controlled by the new controller once the change is done."
storage_pool_change_controller_performance_note	=	"Read/write speed of iSCSI services will slow down when controller is changing."
storage_pool_id	=	"Storage Pool ID"
stripe_cache_size	=	"Stripe Cache Size"
stripe_cache_size_default	=	"Default stripe cache size"
stripe_cache_size_not_support	=	"Only RAID 5, RAID 6, RAID F1, and SHR (three drives or above) can change stripe cache size."
stripe_cache_size_notice	=	"Settings may take a while to apply when system is busy."
stripe_cache_size_small	=	"Smaller stripe cache size"
swap_device_removing	=	"Removing..."
swap_manage	=	"Swap"
swap_manage_desc	=	"Swap drive space to temporarily store inactive data in the memory and improve performance."
synology_drive_db	=	"Synology Drive"
system_raid_allow_join	=	"Select"
system_raid_create_sys_partition_alert	=	"All data on the following drives will be permanently deleted after the system partition is created."
system_raid_create_sys_partition_confirm	=	"I understand that all my data on the drives above will be permanently deleted and cannot be recovered."
system_raid_in_syncing	=	"Syncing"
system_raid_join	=	"Enabled"
system_raid_min_disk_limit_alert	=	"Please select at least {0} drives in Normal or Initialized status for the system partition."
system_raid_not_join	=	"Not Enabled"
system_raid_sha_min_disk_limit_alert	=	"In a high-availability cluster, you must select at least {0} drives in Normal status for the system partition."
system_raid_status	=	"Partition Status"
system_raid_sync_conf	=	"Save"
system_title	=	"System Partition"
unused_size	=	"Unused"
usage_analyze_progress	=	"Analyzing … ({0}%)"
usage_detail	=	"Usage Details"
usage_detail_apply_fail_internal_error	=	"Cannot enable usage detail analysis. This may be because of an internal system error. Please try again later."
usage_detail_apply_fail_out_of_space	=	"Cannot enable usage detail analysis because of insufficient volume capacity. Please expand the volume size and try again."
usage_detail_calculate_desc	=	"The calculation time depends on the volume capacity and may affect system performance. Are you sure you want to continue?"
usage_detail_category_c2share	=	"Hybrid Share Folder"
usage_detail_category_petaspace	=	"PetaSpace Shared Folder"
usage_detail_desc	=	"Usage details help you better understand the current volume usage. The calculated information also helps you find out which service occupies the largest storage capacity, allowing you to take corresponding actions."
usage_detail_error_internal_error	=	"Cannot enable usage detail analysis. This may be because of an internal system error. Please try again later."
usage_detail_error_out_of_space	=	"Cannot enable usage detail analysis because of insufficient volume capacity. Please expand the volume size and try again."
usage_detail_note	=	"<font class="note-font">Note:</font> The calculation is based on the amount of disk space taken up."
usage_detail_option	=	"Enable usage detail analysis"
usage_detail_setting_note	=	"This option can only be enabled/disabled when the volume is healthy or in warning due to insufficient free space."
usage_enable_notice	=	"Analyzing the usage detail may take some time, depending on the data size. The system performance may be affected during each volume usage analysis."
usage_enable_reminder	=	"No data analyzed. Please go to Storage and select the volume that you want to view its usage details; afterward, click <div class="sm-pool-sug-more-btn-img"></div><b> > Settings > </b><a class="link-font syno-sm-volume-usage-link open-notification" href="#">Usage Details</a> and enable usage detail analysis."
usage_enable_volume_busy	=	"Still analyzing the volume usage from last time. Please try again later."
usage_free	=	"Available capacity"
vm_warning_volume_delete	=	"The selected volume contains the Virtual DSM Manager package or virtual disks. To remove this volume, you must remove the Virtual DSM Manager package or virtual disks first.	Edit"
volume	=	"Volume"
volume_add_disk_into_raid	=	"Expand with a drive"
volume_add_disk_into_shr_lun	=	"Add drives to a SHR LUN"
volume_add_disk_into_shr_lun_help	=	"For a SHR LUN containing one drive, storage capacity will only be expanded when two or more drives are added."
volume_add_disk_into_shr_pool	=	"Add drives to a SHR Disk Group"
volume_add_disk_into_shr_pool_help	=	"For a SHR Disk Group containing one drive, storage capacity will only be expanded when two or more drives are added."
volume_add_disk_into_shr_raidgroup	=	"Add drives to an SHR storage pool"
volume_add_disk_into_shr_raidgroup_help	=	"For an SHR storage pool containing one drive, storage capacity will only be expanded when two or more drives are added."
volume_add_disk_into_shr_volume	=	"Add drives to a SHR volume"
volume_add_disk_into_shr_volume_help	=	"For a SHR volume containing one drive, storage capacity will only be expanded when two or more drives are added."
volume_add_disk_summary_descr	=	"The wizard will apply the following settings. The process time will depend on your drive size. Please do not shut down the system before this process completes."
volume_add_diskselect	=	"Choose drives"
volume_add_diskselect_tip	=	"Hold Shift or Ctrl to select multiple drives"
volume_add_final_title	=	"Creating volume"
volume_add_fs_btrfs	=	"Btrfs (recommended)"
volume_add_fs_btrfs_help	=	"The Btrfs file system supports advanced features including shared folder snapshots and replication, shared folder quota, and advanced data integrity protection."
volume_add_fs_btrfs_peta_type	=	"Btrfs (Peta Volume)"
volume_add_fs_btrfs_type	=	"Btrfs"
volume_add_fs_ext3_type	=	"Traditional volume format (ext3)"
volume_add_fs_ext4	=	"ext4"
volume_add_fs_ext4_help	=	"The ext4 file system is widely used in the Linux operating system and can be easily migrated to _DISKSTATION_ running earlier versions of _OSNAME_."
volume_add_fs_ext4_type	=	"ext4"
volume_add_fs_title	=	"Select a file system"
volume_add_fs_type	=	"File system"
volume_add_lun_title_through_iscsitarget	=	"Select the LUN type"
volume_add_mode_customized	=	"Custom"
volume_add_mode_customized_help	=	"It is for advanced users who want to choose their own RAID types and create multiple volumes according to their needs."
volume_add_mode_customized_note	=	"Please select this option if you want to create a volume on an existing storage pool."
volume_add_mode_general_volume	=	"Single Volume on RAID"
volume_add_mode_general_volume_help	=	"To create a single volume with all the space of selected drives. It provides the best access performance."
volume_add_mode_logical_volume	=	"Multiple Volumes on RAID"
volume_add_mode_logical_volume_help	=	"To create a volume on a Disk Group that allows multiple volumes on it. It provides flexibility of dynamic capacity management."
volume_add_mode_systemdefault	=	"Quick"
volume_add_mode_systemdefault_help	=	"The system will create a SHR volume, which optimizes performance and space allocation. When two or more drives are installed, data protection for drives with fault tolerance is available. This is recommended for general users."
volume_add_mode_title	=	"Choose a mode"
volume_add_progress_diskinit	=	"Checking and configuring drives"
volume_add_progress_title	=	"Progress of Creating Volume"
volume_add_progress_volinit	=	"Creating File System"
volume_add_progress_warning	=	"Do not turn off the server before the new volume is created."
volume_add_purpose	=	"Action"
volume_add_purpose_title	=	"Choose an action"
volume_add_tip_dataprotection	=	"With data protection"
volume_add_tip_dataprotection_by_1_disk	=	"With data protection for 1-drive fault tolerance"
volume_add_tip_dataprotection_by_2_disks	=	"With data protection for 2-drive fault tolerance"
volume_add_tip_dataprotection_by_3_disks	=	"With data protection for 3-drive fault tolerance"
volume_add_tip_nodataprotection	=	"Without data protection"
volume_add_title	=	"Volume Creation Wizard"
volume_add_type_expand_help	=	"Choose this option to expand the volume by adding drives."
volume_add_type_migrate_help	=	"Choose this option to change to another RAID type."
volume_add_type_repair_help	=	"Choose this option to repair a degraded volume. After repairing, if there is unallocated drive space, the system will expand the volume size automatically."
volume_add_volmgr_title	=	"Volume Creation Wizard"
volume_add_volmgr_welcome_title	=	"Welcome to the Volume Creation Wizard"
volume_add_warningabout	=	"About"
volume_add_warninginitvol	=	"Writing final configuration. Please wait a moment."
volume_add_warningnodisk	=	"No usable drives."
volume_add_warningtip	=	"The volume information:"
volume_add_warningtipclear	=	"Warning! This action will erase the data on the drive."
volume_add_warningvolumetype	=	"You haven't chosen a volume type."
volume_add_welcome_tip	=	"The wizard will guide you through the steps for creating a volume."
volume_add_welcome_title	=	"Welcome to the Volume Creation Wizard"
volume_adddisk	=	"Add Drive"
volume_adddisk2_type_data_scrubbing	=	"Data scrubbing"
volume_adddisk2_type_expand	=	"Expand"
volume_adddisk2_type_expand_disk	=	"Add drives to expand the storage pool capacity"
volume_adddisk2_type_expand_size	=	"Expand the storage pool by using the unallocated drive space"
volume_adddisk2_type_expand_size_help	=	"Choose this option to expand the volume by using the unallocated drive space."
volume_adddisk2_type_migrate	=	"Change RAID Type"
volume_adddisk2_type_repair	=	"Repair"
volume_adddisk2_welcome_tip	=	"This wizard will guide you through the process of repairing, expanding or changing your data volume type."
volume_adddisk_desc	=	"You can add a drive to expand this RAID 5 volume. Please choose the method you want. We suggest backing up your data in the volume before adding a drive."
volume_adddisk_final_title	=	"Finished"
volume_adddisk_one_step	=	"Expand the volume now"
volume_adddisk_one_step_desc	=	"The volume will be expanded automatically after the drive is added. All services will be stopped until the process is complete. This may take several hours, depending on the volume capacity."
volume_adddisk_progress_reshape	=	"Adding drive"
volume_adddisk_progress_title	=	"Progress of adding drive"
volume_adddisk_progress_warning	=	"Do not turn off the server before the drive is added."
volume_adddisk_step_title	=	"Options"
volume_adddisk_title	=	"Add Drive Wizard"
volume_adddisk_two_step	=	"Expand the volume later"
volume_adddisk_two_step_desc	=	"The drive will be added now without the volume being expanded. You can manually expand the volume later. This may take much more time, but all services will remain available."
volume_adddisk_type_one_warning	=	"Warning! The action will erase all the data on the selected drive, and all the services will be stopped temporarily. Are you sure you want to continue?"
volume_adddisk_type_two_warning	=	"All the data on the newly added drive will be erased. Are you sure you want to continue?"
volume_adddisk_welcome_tip	=	"You can expand the RAID 5/6 volume by adding another drive."
volume_adddisk_welcome_title	=	"Welcome to the Add Drive Wizard"
volume_additional_disk	=	"Additional drive"
volume_all_service_stop	=	"This action will stop all services temporarily. Are you sure you want to continue?"
volume_alloc_invalid_range_hint	=	"The valid range of the volume capacity is from {0} to {1} GB."
volume_allocate_max_tooltip	=	"The maximum single volume size may vary depending on your _DISKSTATION_ model and the selected RAID type. <a href="https://kb.synology.com/DSM/tutorial/Why_does_my_Synology_NAS_have_a_single_volume_size_limitation" target="_blank" class="link-font">Learn more</a>"
volume_allocate_size_field_name	=	"Modify allocated size"
volume_allocate_size_title	=	"Allocate volume capacity"
volume_allocate_space	=	"Allocating space"
volume_apply_disk	=	"Selected drive"
volume_assigned	=	"Used"
volume_atime_desc	=	"Specify how often the system records the access time of a file. A lower file access frequency represents higher performance."
volume_atime_option	=	"Record file access time frequency"
volume_atime_option_hint	=	"Specify how often the system will record the last access time of a file. Selecting a less frequent option helps to deliver better replication performance. Please refer to Help article for more information."
volume_auto_convert_shr_to_pool_tip	=	"The Synology Hybrid Raid (SHR) configuration has been detected. You can convert this storage pool into one supporting multiple volumes to make better use of the remaining capacity. Do you want to convert this storage pool?"
volume_available_capacity_ha_tooltip	=	"This value is determined by the smaller available capacity between the active and passive servers."
volume_available_disks	=	"Available Drives"
volume_available_filenumber	=	"Remaining File Count"
volume_available_slot	=	"Empty Drive Slot"
volume_bad_sector_fsck	=	"<span class="orange-status">A new bad sector was found on a drive in Volume {0}. If this issue occurs frequently, it may result in a file system error. Back up your data immediately and run a <a class="link-font volume-fsck-link" href="#" {1} {2}>file system check</a>.</span> If this issue persists, check the corresponding storage pool's drive status. If the drives are healthy, make sure to back up your data before removing the volume and creating a new one. Perform the same steps if the drives are not healthy, but replace the defective drives before creating a new volume."
volume_bad_sector_scrubbing	=	"<span class="orange-status">Bad sectors have been found on a drive in Volume {0}. To ensure data consistency, please run data scrubbing immediately on the corresponding storage pool.</span> Click <a class="scrubbing-execute-link">Start</a> to run data scrubbing now.</br> (Click <a class="scrubbing-ignore-link">Ignore</a> if you want to continue monitoring this issue.)"
volume_beepoff	=	"Mute"
volume_block_lun	=	"LUN (Block-Level)"
volume_block_lun_desc	=	"This type of LUN is created on a storage pool and provides flexibility of dynamic capacity management with optimized access performance."
volume_btn_add_spare_disk	=	"Add Spare Drive"
volume_btn_cancel_btrfs_balance	=	"Cancel Volume Optimization"
volume_btn_cancel_fsck	=	"Cancel File System Check"
volume_btrfs_not_support	=	"<span class="red-status">Volume {0} is in abnormal status because your _DISKSTATION_ does not support the Btrfs file system.</span> Please shut down the system first and remove the drives of this storage pool. Then, insert the drives into <a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Which_Synology_NAS_models_support_the_Btrfs_file_system" target="_blank">a model that supports Btrfs</a> and assemble the storage pool."
volume_busy_waiting	=	"Volume is busy. Please try again later."
volume_cable_connection_abnormal	=	"Expansion unit connection is not configured properly."
volume_cable_err_expansion	=	"Unable to detect {0}."
volume_cable_err_host_dead	=	"Unable to detect {0}. Please make sure the {0} is powered on."
volume_cable_err_host_standby	=	"{0} is abnormal and unable to provide services."
volume_cable_err_line	=	"Make sure both SAS cables are properly connected to {0}."
volume_cable_no_expansion	=	"No Expansions"
volume_cable_overview	=	"Expansion"
volume_cable_overview_title	=	"Expansion Overview"
volume_cache_crashed_can_reassemble_suggestion	=	"<span class="red-status">SSD Cache {0} on Volume {1} has crashed.</span> Click <a class="link-font re-assemble-link" href="#">Online Assemble</a> to reassemble the storage pool and regain access to your data."
volume_cache_crashed_can_reassemble_suggestion_multiple	=	"<span class="red-status">SSD Cache {0} on Volume {1} has crashed.</span> Click <a class="link-font re-assemble-link" href="#">Online Assemble</a> to reassemble the storage pool and regain access to your data."
volume_cache_disk	=	"Cache Drives"
volume_cache_missing_can_reassemble_suggestion	=	"<span class="red-status">SSD Cache {0} on Volume {1} is missing.</span> However, a sufficient number of SSD cache drives has been detected. Please click <a class="link-font re-assemble-link" href="#">Online Assemble</a> to assemble the storage pool and then access the data on the drive."
volume_cache_missing_can_reassemble_suggestion_multiple	=	"<span class="red-status">SSD Cache {0} on Volume {1} is missing.</span> However, a sufficient number of SSD cache drives has been detected. Please click <a class="link-font re-assemble-link" href="#">Online Assemble</a> to assemble the storage pool and then access the data on the drives."
volume_cache_missing_drive_back_partial_suggestion	=	"<span class="red-status">Undetected SSD in SSD Cache {0} on Volume {1}.</span> Please check the drive connection status or refer to <b>Cache Drive Info</b> below to find out which SSD is missing and install it back in your _DISKSTATION_. Also, you can simply click <a class="link-font re-assemble-link" href="#">Online Assemble</a> to assemble SSD Cache {0}."
volume_cache_missing_drive_back_partial_suggestion_multiple	=	"<span class="red-status">Undetected SSDs in SSD Cache {0} on Volume {1}.</span> Please check the drive connection status or refer to <b>Cache Drive Info</b> below to find out which SSDs are missing and install them back in your _DISKSTATION_. Also, you can simply click <a class="link-font re-assemble-link" href="#">Online Assemble</a> to assemble SSD Cache {0}."
volume_cache_missing_no_missing_drives_record_suggestion	=	"<span class="red-status">SSD Cache {0} on Volume {1} is missing.</span> This may result in a file system crash or data loss. Check the drive connection status or find the missing SSDs and install them back in your _DISKSTATION_."
volume_cache_missing_suggestion	=	"<span class="red-status">SSD Cache {0} on Volume {1} is missing.</span> This may result in file system crash or data loss. Please check the drive connection status or refer to <b>Required Drive Info</b> below to find out which drive is required and install it back in your _DISKSTATION_."
volume_cache_missing_suggestion_multiple	=	"<span class="red-status">SSD Cache {0} on Volume {1} is missing.</span> This may result in file system crash or data loss. Please check the drive connection status or refer to <b>Required Drive Info</b> below to find out which drives are required and install them back in your _DISKSTATION_."
volume_cache_remove_failed_disk_suggestion	=	"SSD Cache {0} on Volume {1} has been repaired. Please refer to <b>Cache Drive Info</b> below to find out the defective SSD and remove it, or simply go to the <b>HDD/SSD</b> page, select the defective SSD, and click <b>Action</b> > <b>Deactivate Drive</b> to deactivate it."
volume_cache_remove_failed_disk_suggestion_multiple	=	"SSD Cache {0} on Volume {1} has been repaired. Please refer to <b>Cache Drive Info</b> below to find out the defective SSDs and remove them, or simply go to the <b>HDD/SSD</b> page, select the defective SSDs, and click <b>Action</b> > <b>Deactivate Drive</b> to deactivate them."
volume_cache_unsafe_crash_desc	=	"<span class="red-status">SSD Cache {0} on Volume {1} has crashed.</span> Your data may be corrupted. To rescue your data, please sign in to your <a href="https://account.synology.com/support" target="blank">Synology Account</a> to submit a technical support ticket."
volume_caution	=	"Warning"
volume_caution_desc	=	"One or more storage pool/SSD caches are degraded. We recommend replacing failing drives with healthy ones."
volume_change_all_warning	=	"This action may take over 10 minutes, depending on the shared folder size. All services will be stopped during the operation, and resume after the operation is completed. Are you sure you want to continue?"
volume_change_service_stop_depend_on_size	=	"All services will be stopped during the process and the process time would vary according to the volume size, {0}"
volume_change_service_stop_in_minutes	=	"All services will be stopped for several minutes, {0}"
volume_change_this_warning	=	"This action may take over 10 minutes, depending on the shared folder size. The service {0} will be stopped during the operation, and resume after the operation is completed. Are you sure you want to continue? "
volume_change_warning	=	"This action may take over 10 minutes, depending on the size of the shared folder. All file services which use this shared folder will be stopped during the operation, and resumed after the operation is completed. Are you sure you want to continue?"
volume_choose_adddisk_type	=	"Choose a method"
volume_choose_existing_raid	=	"Choose an existing storage pool"
volume_choose_fs_info	=	"<a href="https://www.synology.com/knowledgebase/DSM/tutorial/Storage/Which_file_system_should_I_use_to_create_a_volume" target="_blank">More information about choosing file systems</a>"
volume_choose_raid_title	=	"Select a storage pool"
volume_choose_shr_protect_title	=	"Choose protection level of Synology Hybrid RAID(SHR)"
volume_choosedisk	=	"Choose a drive"
volume_chose_hdd_type	=	"Drive type"
volume_convert_shr_raidgroup_to_pool	=	"Convert Storage Pool"
volume_convert_shr_raidgroup_to_pool_help	=	"Convert storage pool to support multiple volumes. The volume will still be a member of the original storage pool without affecting its data. This feature is supported on SHR storage pools only."
volume_convert_shr_volume_to_pool	=	"Convert to Disk Group by adding hard disks"
volume_convert_shr_volume_to_pool_help	=	"Convert the volume to Disk Group. The volume will become a member of the new Disk Group without affecting its original data. This feature is supported on SHR volumes only."
volume_count_limit_reached	=	"Reached the maximum number of volumes allowed. You can only create up to {0} volumes."
volume_crashed_service_disable	=	"Cannot enable {0} due to crashed volume."
volume_crashed_warning	=	"The volume has crashed."
volume_create_pool_without_enough_disk_warning	=	"The number of unused drives is insufficient for creating this type of RAID."
volume_create_raid	=	"Create a new storage pool"
volume_create_vol_lun_hint	=	"Before using the space on storage pools, you have to create a volume first. You can go to the Volume tab to create a volume after the {0} creation is complete."
volume_danger	=	"Critical"
volume_danger_desc	=	"One or more storage pools/SSD caches have crashed. We recommend rescuing your data by copying the files or running a backup task."
volume_data_full_create_space_suggestion	=	"Volume {0} is running out of available space and will affect system performance. You can <a href="https://kb.synology.com/DSM/tutorial/how_to_expand_storage#other_methods" target="_blank">create a new storage pool</a> or try to <a href="https://sy.to/tutorial_volume_out_of_capacity" target="_blank">free up the available space</a>."
volume_data_full_delete_file_suggestion	=	"Volume {0} is running out of available space and cannot be expanded. This may affect system performance. Create a new volume or try to free up the available space to maintain system stability. <a href="https://sy.to/tutorial_volume_out_of_capacity" target="_blank">Learn more</a>"
volume_data_full_raid_can_not_add_disk_suggestion	=	"Volume {0} is running out of available space and will affect system performance. <a href="https://sy.to/tutorial_volume_out_of_capacity" target="_blank">Install additional drives and change the RAID type</a> for more capacity."
volume_data_full_volume_expand_size_sug	=	"Volume {0} is running out of available space and will affect system performance. <a class="link-font volume-expand-link" href="#">Expand the capacity to {1}</a> immediately to maintain system stability. <a href="https://sy.to/tutorial_volume_out_of_capacity" target="_blank">Learn more</a>"
volume_data_scrubbing_remind	=	"Data consistency has not been checked for a long time. We strongly recommend you go to Storage Manager and perform RAID scrubbing to identify any data inconsistencies in advance."
volume_default_desc	=	"Located on {0}"
volume_delete_feasibility_check	=	"Removing the volume will disable the usage history function in Resource Monitor and permanently erase all usage history data. Please keep at least one storage pool and volume to prevent data loss."
volume_delete_final_title	=	"Removing volume"
volume_delete_share_worm_compliance	=	"The following WriteOnce shared folders are in Compliance mode: <span class="bold-font">{0}</span>"
volume_delete_share_worm_snapshot	=	"The following shared folders have immutable snapshots: <span class="bold-font">{0}</span>"
volume_delete_summary_desc	=	"The required time for volume removal depends on the package quantity on the volume. Do not shut down the system before the removal process is complete."
volume_delete_summary_single_bay_internal_desc	=	"If you remove this volume, its storage pool will also get removed. The processing time depends on your drive size, volume type, and the number of package services. Please do not shut down the system before the process is complete."
volume_delete_title	=	"Remove Volume Wizard"
volume_delete_volmgr_title	=	"Remove Volume"
volume_delete_volmgr_welcome_title	=	"Welcome to the Volume Removal Wizard"
volume_delete_warning	=	"All data on the volume will be deleted when you remove the volume."
volume_delete_welcome_title	=	"Welcome to the Remove Volume Wizard"
volume_desc	=	"Volume description"
volume_desc_system_info_tip	=	"Show system information"
volume_details	=	"Get Info"
volume_disk	=	"Drive"
volume_disk_3tb_limitation	=	"The volume is created during a previous version of _OSNAME_, which does not support drives larger than 2 TB. To use drives larger than 2 TB, please create a new volume with the latest version of _OSNAME_."
volume_disk_failure_number	=	"Number of Failed Drives"
volume_disk_info	=	"Drive"
volume_disk_information	=	"Drive Information"
volume_disk_link	=	"Click here for detailed information about HDD/SSD."
volume_disk_number	=	"Drive Number"
volume_disk_number_to_be_repaired	=	"Insufficient number of drives"
volume_disk_power_abnormal_fsck	=	"<span class="orange-status">An abnormal power failure occurred on a drive in Volume {0}. If this issue occurs frequently, it may result in a file system error. Back up your data immediately and run a <a class="link-font volume-fsck-link" href="#" {1} {2}>file system check</a>.</span> If this issue persists, check the corresponding storage pool's drive status. Make sure you back up your data before replacing any defective drives."
volume_disk_power_abnormal_fsck_scrubbing	=	"<span class="orange-status">An abnormal power failure occurred on a drive in Volume {0}, and its write cache data may be lost. Back up your data immediately and run a <a class="link-font volume-fsck-link" href="#" {1} {2}>file system check</a>.</span> If this issue persists, check the corresponding storage pool's drive status. If the drives are healthy, make sure to back up your data before removing the volume and creating a new one. Perform the same steps if the drives are not healthy, but replace the defective drives before creating a new volume. Note that the system will automatically run data scrubbing after performing the file system check."
volume_disk_power_abnormal_scrubbing	=	"<span class="orange-status">An abnormal power failure occurred on a drive in Volume {0}, and its write cache data may be lost. To ensure data consistency, please run data scrubbing immediately on the corresponding storage pool.</span> Click <a class="scrubbing-execute-link" href="#">Start</a> to run data scrubbing now.</br> (Click <a class="scrubbing-ignore-link" href="#">Ignore</a> if you want to continue monitoring this issue.)"
volume_disk_rebuild	=	"Preparing..."
volume_disk_source_ebox	=	"Expansion Unit"
volume_disk_source_internal	=	"Internal drive"
volume_disk_type	=	"Drive Type"
volume_diskcapacity	=	"Drive Size"
volume_diskcheck	=	"Perform drive check"
volume_diskcheck_disable_help	=	"Bad sector will not be remapped during the volume building process."
volume_diskcheck_enable_help	=	"Bad sectors will be automatically remapped if found. Performing drive check takes a longer time, but errors are less likely to occur during the volume building process."
volume_diskcheck_title	=	"Drive check"
volume_diskdeactivated	=	"Deactivated"
volume_diskdeactivated_sys_slot_tooltip	=	"This drive has been removed from the system partition. Now you can remove it safely from the system drive slot."
volume_diskdeactivated_tooltip	=	"This drive has been removed from Storage Pool. Now you can remove it from the drive slot safely."
volume_diskfailed	=	"Crashed"
volume_diskfailed_tooltip	=	"The system has removed this drive from the storage pool. To continue using this drive, please go to Action > Deactivate Drive to deactivate the drive first. Afterward, you can either restart your _DISKSTATION_ or remove and reinsert the drive."
volume_diskfailednotknown	=	"Unknown Error"
volume_diskfailedsys	=	"System Partition Failed"
volume_diskfailedsys_tooltip	=	"The Synology system on this drive was created incorrectly. Go to the Overview page and click the Repair link."
volume_diskinuse	=	"Normal"
volume_diskinuse_tooltip	=	"This drive has the Synology system installed on it and is assigned to a storage pool."
volume_diskinuse_without_sys_tooltip	=	"This drive is assigned to a storage pool."
volume_diskmask	=	"Drive"
volume_diskmodel	=	"Model"
volume_disknotset	=	"No Drive Installed"
volume_disknotsupported	=	"Not supported by the current _OSNAME_ version"
volume_disknotsupported_overview_suggestion	=	"The system detected that one or more drives are not supported by the current _OSNAME_ version. We recommend upgrading to _OSNAME_ 7.1 to continue using those drives."
volume_disknotsupported_overview_suggestion_general	=	"Some drives' data formats are not supported by the current _OSNAME_ version. To continue using these drives, insert the drives back into the original device or go to the <b>HDD/SSD</b> page to reset them."
volume_disknotuse	=	"Not Initialized"
volume_disknotuse_tooltip	=	"This drive does not have the Synology system installed on it. You can select this drive for storage pool creation."
volume_disknotuse_without_sys_tooltip	=	"This drive is not assigned to any storage pool."
volume_disknumber	=	"Number"
volume_diskstatus	=	"Status"
volume_disksysuse	=	"Initialized"
volume_disksysuse_sys_slot_tooltip	=	"The Synology system is installed on this drive."
volume_disksysuse_tooltip	=	"The Synology system is installed on this drive, but the drive is not assigned to any storage pool."
volume_diskvendor	=	"Vendor"
volume_display_disk_num	=	"Display Drive Number"
volume_do_fsck	=	"Run a file system check"
volume_doing_statistics	=	"Calculating {0}..."
volume_dot	=	"‧"
volume_e_unit	=	"Device"
volume_edit_desc	=	"Edit"
volume_edit_description	=	"Edit Description"
volume_edit_raid_title	=	"Expand volume"
volume_enable_btrfs_free_space_tree	=	"Enabling cache for free space management"
volume_enclosure_not_available	=	"Not available"
volume_error	=	"Failed"
volume_error_bad_sector	=	"Failed to create the volume because the health status of Drive {0} is abnormal. Please replace the failing drive with a healthy one and try again."
volume_exceed_max_size_msg	=	"This value should not exceed {0}."
volume_expand_backup	=	"Please back up your data before expanding volume."
volume_expand_error	=	"Failed to expand volume."
volume_expand_final_title	=	"Expanding volume"
volume_expand_finish	=	"Successfully expanded volume."
volume_expand_lun_by_add_disk	=	"Expand the LUN by adding drives"
volume_expand_lun_with_unalloc_size	=	"Expand the LUN by using unallocated drive space"
volume_expand_multi_volume_suggestion	=	"Volume {0} is running out of available space and will affect system performance. To increase the available space, click this volume's <div class="sm-pool-sug-more-btn-img"></div> more icon and go to <span class="bold-font">Settings</span> > <span class="bold-font">Modify Size</span>. <a href="https://sy.to/tutorial_volume_out_of_capacity" target="_blank">Learn more</a>"
volume_expand_progress	=	"Expand volume"
volume_expand_progress_init	=	"Initial operations"
volume_expand_progress_title	=	"Expand Volume"
volume_expand_progress_warning	=	"Do not turn off the server before the volume is successfully expanded."
volume_expand_raidgroup_by_add_disk	=	"Expand the storage pool by adding drives"
volume_expand_raidgroup_with_unalloc_size	=	"Expand the storage pool by using the unallocated drive space"
volume_expand_service_stop	=	"All services will stop temporarily. Are you sure you want to continue?"
volume_expand_size	=	"Total capacity after expansion"
volume_expand_size_and_limit_suggestion	=	"Even though the maximum allocable size is {0}, Volume {2} can only be expanded to {1} because of CPU limitations."
volume_expand_size_sug	=	"The system detected an incomplete volume expansion. Click <a class="link-font volume-expand-link" href="#" {2}>expand now</a> to modify the size of Volume {0} to {1}."
volume_expand_unallocated_space	=	"Expand by using the unallocated drive space"
volume_expand_unfinished_shr_add_disk_desc	=	"Expanding the volume of SHR will not change the RAID type."
volume_expand_unfinished_shr_note	=	"<font class="note-font">Note:</font> This operation is irreversible."
volume_expand_unfinished_shr_to_shr2	=	"Change RAID type to SHR-2"
volume_expand_welcome_tip	=	"You can expand this volume"
volume_expand_welcome_title	=	"Welcome to the Volume Expansion Wizard"
volume_expanding_waiting	=	"Expanding volume..."
volume_expansion	=	"Expansion Unit"
volume_ext3	=	"EXT3"
volume_ext3_desc	=	"EXT3 is the popular file system for many Linux distributions."
volume_ext4	=	"EXT4"
volume_ext4_desc	=	"EXT4 is a widely used file system in Linux."
volume_ext4_not_support	=	"<span class="red-status">Volume {0} is in abnormal status because your _DISKSTATION_ does not support the ext4 file system.</span> Please shut down the system first and remove the drives of this storage pool. Then, insert the drives into a model that supports ext4 and assemble the storage pool."
volume_fail_activate_ebox_but_detect_raid	=	"Failed to activate. The System detects a crashed volume in the device."
volume_feature_not_support	=	"<span class="red-status">Volume {0} is in abnormal status. Some of its features may not be supported by the current _OSNAME_ version or your _DISKSTATION_ model.</span> Try updating the _OSNAME_ version first. If that does not resolve the issue, we recommend taking the following actions. Shut down the system to remove the drives of this storage pool. Then, install the drives into their former _DISKSTATION_ and assemble the storage pool."
volume_filesystem	=	"File System"
volume_filesystem_error_deny	=	"Errors occurred in the file system. Please try again later. If the operation still fails, please contact Synology Technical Support."
volume_fill_all_additional_disks	=	"All RAID Arrays except the last one must be filled."
volume_fill_all_required_disks	=	"Please assign all the required drives."
volume_final_remind_text	=	"Please do not shut down the system before this process completes."
volume_flashcache_crashed_desc	=	"SSD cache is crashed. It will not affect your data on the volume where SSD cache is mounted. Please go to SSD Cache tab for more information."
volume_frag_suggestion_add_disk	=	"The available space in Volume {0} is fragmented. Delete data you do not need. You can also expand this storage pool by installing additional drives and clicking the storage pool's upper-right icon <div class="sm-pool-sug-more-btn-img"></div> > <b>Add Drive</b>."
volume_frag_suggestion_balance	=	"The available space in Volume {0} is fragmented. To optimize the available space in Volume {0}, click <a class="link-font volume-balance-link" href="#" {1} {2}>volume optimization</a>."
volume_frag_suggestion_change_raid_type	=	"The available space in Volume {0} is fragmented. Delete data you do not need. You can also change the RAID type of this storage pool to one that offers a larger storage capacity. <a href="https://kb.synology.com/DSM/help/DSM/StorageManager/storage_pool_what_is_raid" target="_blank">Learn more</a>"
volume_frag_suggestion_delete_file	=	"The available space in Volume {0} is fragmented. Delete data you do not need."
volume_frag_suggestion_expand_multi_volume	=	"The available space in Volume {0} is fragmented. Allocate more space to this volume by clicking the volume's upper-right icon <div class="sm-pool-sug-more-btn-img"></div> > <b>Settings</b> > <b>Modify Size</b> and modifying the allocated size."
volume_freesize	=	"Available capacity"
volume_freesize_move_pgsql	=	"The volume you want to remove contains system data. To move the system data to the other volume, there should be at least {0} available on that volume."
volume_fs_error_fsck	=	"<span class="orange-status">File system errors occurred on Volume {0}. Back up your data and run a <a class="link-font volume-fsck-link" href="#" {1} {2}>file system check</a>.</span> If the issue persists, make sure to back up your data before removing the volume and creating a new one."
volume_fs_limit_warning	=	"The available space of RAID Group exceeds 108 TB, which is the maximum size of file system. The volume size will be limited to {0} at most."
volume_fs_resize_notify	=	"The volume can be expanded to {0} without stopping related services. Please note that services on this volume will be interrupted during space expansion beyond {0}."
volume_fsck	=	"File system error was discovered (please refer to {0} for details). Do you want to reboot and run a file system check? <br><br><font class="note-font"><b>Note:</b></font> The file system check might take a while, during which time _OSNAME_ and all other services will be unavailable. File system check status can be viewed in Synology Assistant."
volume_fsck_confirmed	=	"Yes, run a file system check after rebooting"
volume_fsck_notification	=	"File System Check"
volume_fsck_notification_msg	=	"Running a file system check requires time, during which all services will become temporarily unavailable. Are you sure you want to restart the system and run a file system check?"
volume_fsck_remind	=	"<span class="orange-status">File system errors occurred in Volume {0}. We recommend backing up your data and running a <a class="link-font volume-fsck-link" href="#">file system check</a>.</span> If the issue persists, please check the drive status of all relevant drives. If the drives are healthy, please go to Volume {0} and click <div class="sm-pool-sug-more-btn-img"></div> > <b>Remove</b> to remove the volume and then create a new one; if the drives are defective, please remove the volume, replace the defective drives, and then create a new volume."
volume_fsck_wait4building	=	"File system check cannot be performed now, because some volumes are currently busy with other tasks. Please wait and try again later."
volume_generalhd	=	"Basic"
volume_group	=	"Volume Group"
volume_ha_has_split_brain	=	"Due to a split-brain error, this _DISKSTATION_ was unbound from a high-availability cluster and returns to standalone mode. Please identify the server which contains the most up-to-date data, and rebind the server in order to create a high-availability cluster again."
volume_ha_space_limit_reached	=	"Reached the maximum number of volumes on Synology High Availability. You can only create up to {0} volumes."
volume_ha_unbind_notification	=	"High-Availability Cluster Unbound"
volume_ha_was_passive_node	=	"This _DISKSTATION_ used to be a passive server in a high-availability cluster. To avoid data inconsistency, we suggest you remove all existing volumes and LUNs and create new ones to start over."
volume_hdd_type	=	"Drive type"
volume_healthy	=	"Healthy"
volume_healthy_desc	=	"System is healthy."
volume_hfsplus	=	"HFS+"
volume_hide_disk_num	=	"Hide Drive Number"
volume_hot_spare	=	"Hot Spare"
volume_hot_spare_desc	=	"Assign hot spare drives to standby and automatically repair degraded storage pools if a drive fails."
volume_hot_spare_disk	=	"Hot Spare Drives"
volume_hot_spare_tooltip	=	"This drive is a spare drive. It can be used to replace a failing drive and can automatically repair a degraded storage pool."
volume_info	=	"Volume"
volume_info_dedup_desc	=	"{0} ({1}%)"
volume_info_dedup_title	=	"Deduplication savings"
volume_info_dedup_tooltip	=	"Savings data are updated regularly."
volume_inode_full_delete_file_suggestion	=	"The number of files in Volume {0} is reaching the maximum limit. New files can no longer be added to this volume once the limit is reached. Please delete unnecessary files to free up space."
volume_inode_full_expand_suggestion	=	"The number of files in Volume {0} is reaching the maximum limit. New files can no longer be added to this volume once the limit is reached. Please install a new drive in your _DISKSTATION_ and then return to this storage pool and click <div class="sm-pool-sug-more-btn-img"></div> > <b>Add Drive</b> (see <a href="https://www.synology.com/knowledgebase/DSM/help/DSM/StorageManager/storage_pool_expand_add_disk" target="_blank">this article</a> for detailed instructions) to expand the volume size and the maximum number of files. Or you can simply delete unnecessary files to free up space."
volume_inode_full_modify_size_suggestion	=	"The number of files in Volume {0} is reaching the maximum limit. New files can no longer be added to this volume once the limit is reached. Please go to Volume {0} and click <div class="sm-pool-sug-more-btn-img"></div> > <b>Settings</b> > <b>Modify Size</b> to expand the volume size and the maximum number of files."
volume_internal	=	"Internal"
volume_is_busy	=	"Volume is running other tasks"
volume_iscsi_lun_mapping	=	"LUN Mapping"
volume_iscsi_lun_usage	=	"iSCSI Usage"
volume_iscsitrg_block	=	"iSCSI target (Block-Level)"
volume_iscsitrg_block_help	=	"Choose one or more drives to create iSCSI target."
volume_iscsitrg_enabledisable_title	=	"Enable/Disable"
volume_iscsitrg_file	=	"iSCSI target (Regular Files)"
volume_iscsitrg_file_help	=	"Choose one volume and share some space to create iSCSI target."
volume_iscsitrg_lun	=	"LUN"
volume_iscsitrg_lun_block	=	"LUN (Block-Level)"
volume_iscsitrg_lun_block_help	=	"Choose one or more drives to create LUN."
volume_iscsitrg_lun_file	=	"LUN (File-Level)"
volume_iscsitrg_lun_file_help	=	"This type of LUN provides flexibility of dynamic capacity management with Thin Provisioning."
volume_iscsitrg_status	=	"Service Status"
volume_level	=	"Type"
volume_lun_block_level	=	"LUN (Block-Level)"
volume_lun_file	=	"LUN (Regular File)"
volume_m2_device	=	"M.2 Drive"
volume_manage	=	"Manage"
volume_manage_title	=	"Volume Manager Wizard"
volume_manage_welcome_title	=	"Welcome to the Volume Manager Wizard"
volume_max_allocatable_size	=	"Max. allocatable size"
volume_max_allocatable_size_ha_tooltip	=	"This value is determined by the smaller max. allocatable size between the active and passive servers."
volume_max_batch_task_count	=	"You have reached the maximum concurrent task jobs."
volume_max_disks_count	=	"You can only select up to {0} drive(s)."
volume_max_iscsitrg_count_warning	=	"The number of iSCSI target has reached the limit. You can't create a new one."
volume_migrate_add_mirror	=	"Add mirror drives to RAID 1"
volume_migrate_to_raid1	=	"RAID 1"
volume_migrate_to_raid5	=	"RAID 5"
volume_migrate_to_raid5_spare	=	"RAID 5+spare"
volume_migrate_to_raid6	=	"RAID 6"
volume_migrate_to_shr2	=	"SHR-2"
volume_migrate_type	=	"Change Type"
volume_migrate_type_title	=	"Choose a RAID Type"
volume_migrate_with_failed_disk_alert	=	"Operation failed. Please remove the crashed drive(s) from this volume first."
volume_migration_device_syncing	=	"Migrating"
volume_min_disk_count	=	"At least {0} drives are required."
volume_min_disk_size_note	=	"Drive size is equal or bigger than "{0}""
volume_min_max_disk_number	=	"Min/max drive number per RAID Array"
volume_minimal_dev_size	=	"Minimal Drive Size"
volume_mix_disks_warning	=	"The volume is allocated within drives located internally and in the expansion unit. The volume will crash if you disconnect the expansion unit."
volume_modify_alloc_size_unit	=	"Modify allocated size ({0})"
volume_mount_lun_info	=	"LUN Info"
volume_mount_volume	=	"Mounting volume"
volume_mount_volume_info	=	"Volume Info"
volume_mounting_cache	=	"Mounting SSD cache"
volume_move_vaai_jrnl_fail	=	"The volume you want to remove contains advanced LUN journal. To move the advanced LUN journal to another volume, please make sure at least one volume has 65MB available."
volume_multiple_vol_lun_support	=	"Multiple volume support"
volume_need_no_disk_tip	=	"You can change the volume type without selecting any drive. Please click Next to continue."
volume_new	=	"Create"
volume_new_summary_descr	=	"The wizard will apply the following settings. The process time will depend on the selected drive size and volume type. Please do not shut down the system before this process completes."
volume_no_available_disks	=	"No available drives"
volume_no_diskcheck	=	"Skip drive check"
volume_no_expansion	=	"Expansion units are not supported."
volume_no_raid_in_system	=	"There is no {0} in your system, please go to {1} to create a new {0} first."
volume_no_raid_with_protection	=	"There is no storage pool that can utilize Hot Spare in the system."
volume_no_raids	=	"There is no {0} in your system"
volume_no_spare	=	"There is no Hot Spare configuration in your system."
volume_no_ssd_caches	=	"There is no SSD cache in your system."
volume_no_storage_pool	=	"There is no {0} in your system."
volume_no_suitable_spare_disks	=	"No spare drives available."
volume_no_volumes	=	"There is no volume in your system."
volume_none	=	"No data"
volume_nostoragepool	=	"No storage pool"
volume_novolume	=	"No volume"
volume_number	=	"Volume"
volume_offline_feasibility_check	=	"Resource Monitor: Please disable the usage history function and re-enable it later after the operation has completed."
volume_offline_is_running_alert	=	"Cannot perform task. Please wait for the system to complete the task on Volume {0} before you try again."
volume_offline_warn_running_one_task	=	"Cannot perform task. Please wait for the system to complete the task on Volume {0} before you try again."
volume_one_more_ssd	=	"You have to install another SSD on the compatibility list to mount SSD cache. Please visit <a href="www.synology.com">www.synology.com</a> for the compatibility list."
volume_op_balance	=	"volume optimization"
volume_op_balance_title	=	"Volume Optimization"
volume_op_fsck	=	"file system check"
volume_op_fsck_title	=	"File System Check"
volume_op_hard_check_desc	=	"The system cannot run {0} because it cannot unmount the volume. You need to check the following:"
volume_op_hard_check_fail_title	=	"Unable to run {1} on Volume {0}"
volume_op_hard_check_share_fail	=	"Unable to unmount Volume {0} because it contains shared folders in use by one or more packages ({1}). Please try again later."
volume_op_hard_check_volume_fail	=	"Unable to unmount Volume {0} because it is in use by one or more packages ({1}). Please try again later."
volume_op_soft_check_desc	=	"Please note the following information before continuing:"
volume_op_soft_check_share_fail	=	"The following packages use shared folders located on Volume {0}. While {1} is running, these packages will become temporarily unavailable:"
volume_op_soft_check_volume_fail	=	"The following packages are located on Volume {0}. While {1} is running, these packages will become temporarily unavailable:"
volume_op_time_estimating	=	"Calculating..."
volume_op_time_estimation	=	"Approx. {0}"
volume_op_time_estimation_desc	=	"Estimated time"
volume_op_unmount_double_confirm	=	"1. Volume {0} will be temporarily unmounted.<br>2. All data on the volume will be unavailable during this time.<br>3. All services on the volume will be unavailable during this time."
volume_op_unmount_msg_cancel_note	=	"If necessary, you can cancel {0} after it started running. Click the volume's upper-right icon and select the cancel option."
volume_op_unmount_msg_desc	=	"Running {0} will temporarily unmount the volume. During this process, data and services on the volume will be unavailable:"
volume_op_unmount_msg_note	=	"Do not shut down the system during this process. It may take around <span class="bold-font">{0}</span>."
volume_op_unmount_msg_title	=	"Unmount Volume {0} for {1}"
volume_over_fs_limit_warning	=	"You can only expand the volume size of a single-volume storage pool to {0} on certain _DISKSTATION_ models. If the volume size already exceeds {0}, then it cannot be expanded further."
volume_peta_not_enough_memory	=	"Insufficient system memory to create Btrfs (Peta Volume). Please make sure your _DISKSTATION_ has at least 64 GB of memory before trying again."
volume_peta_not_support	=	"<span class="red-status">Volume {0} is in abnormal status because your _DISKSTATION_ does not support a volume that is larger than 200 TB or the system memory is insufficient.</span> <a class="link-font" href="https://sy.to/peta" target="_blank">Check if your model supports this volume size and has at least 64 GB of memory.</a> If it is not supported, do the following: shut down the system, move the drives of this storage pool to a compatible model, and then assemble the storage pool."
volume_pool	=	"Storage Pool"
volume_pool_freesize	=	"Unallocated"
volume_pool_info_header	=	"Disk Group Information"
volume_pool_new_name	=	"New Disk Group"
volume_pool_sentence	=	"Storage pool"
volume_pool_usedsize	=	"Current allocated size"
volume_problemdisknotenough	=	"No available drives"
volume_raid	=	"RAID"
volume_raid_create_title	=	"Disk Group Creation Wizard"
volume_raid_creation_title	=	"Create Storage Pool"
volume_raid_for_multiple_volumes	=	"RAID Group for multiple volumes or LUNs (Block-Level)"
volume_raid_for_single_volume	=	"RAID Group for single volume or LUN (Block-Level)"
volume_raid_group	=	"Storage Pool"
volume_raid_group_status	=	"Storage Pool Status"
volume_raid_location	=	"Location"
volume_raid_manage_title	=	"Disk Group Manage Wizard"
volume_raid_property	=	"Configure storage pool property"
volume_raid_purpose	=	"Multiple volumes/LUNs support"
volume_raid_purpose_title	=	"Select a storage pool type"
volume_raid_remaining_tolerable_failed_disk_number	=	"Currently allowed number of failed disks"
volume_raid_subgroup	=	"RAID Array"
volume_raid_title	=	"RAID Type"
volume_raid_type	=	"RAID type"
volume_recommand	=	"Recommended for drives on which _OSNAME_ was not installed before"
volume_recommand_with_protect	=	"Recommended for new drives or volumes with data protection"
volume_remove_raid_group	=	"Remove Storage Pool"
volume_remove_storage_pool_remind	=	"To remove this volume, please go to {0} to remove [{1}]."
volume_remove_waiting	=	"System is removing the volume. Please wait a moment."
volume_repair_choosedisk	=	"Choose the drive for repairing the volume."
volume_repair_disk_warning_remind	=	"The associated drive has entered the warning status. Please go to HDD/SSD for more details [{0}]."
volume_repair_diskdesigned	=	"Total Number of Drives"
volume_repair_diskfailed	=	"Total Number of Crashed Drives"
volume_repair_disknormal	=	"Total Number of Available Drive"
volume_repair_final_title	=	"Repairing volume"
volume_repair_link	=	"Click here to continue by the suggestion under the Disk Group tab."
volume_repair_lun_help	=	"Choose this option to repair a degraded LUN. If there is unallocated drive space after the repair, the system will expand the LUN size automatically."
volume_repair_nodisk	=	"No unused drive for repairing"
volume_repair_pool_help	=	"Choose this option to repair a degraded Disk Group. After repairing, if there is unallocated disk space, the system will expand the Disk Group size automatically."
volume_repair_raid_help	=	"Choose this option to repair a degraded Disk Group. After repairing, if there is unallocated space, the system will expand the Disk Group size automatically."
volume_repair_raidgroup_help	=	"Choose this option to repair a degraded storage pool. If there is unallocated drive space after the repair, the system will expand the storage pool size automatically."
volume_repair_steps	=	"Repair Step"
volume_repair_storage_pool_remind	=	"The associated storage pool is degraded. Please go to {0} to repair [{1}]."
volume_repair_syspart	=	"Repair the system partition"
volume_repair_syspart_fail	=	"Failed to repair the system partition (possible error: {0}.)"
volume_repair_syspart_help	=	"Choose this option to repair the system partition."
volume_repair_syspart_try	=	"System is trying to repair the system partition."
volume_repair_tip	=	"Use this function to repair the degraded volume. You can choose the unused drive to repair the volume."
volume_repair_title	=	"Repair Volume"
volume_repair_welcome_tip	=	"You can repair a degraded volume."
volume_repair_welcome_title	=	"Welcome to the Volume Repair Wizard"
volume_reported	=	"Reported"
volume_required_disk	=	"Required drive"
volume_reserve_space_tip	=	"The volume reserves up to 5% of storage space for metadata usage."
volume_ro_feature_not_support	=	"<span class="red-status">Volume {0} has become read-only. Some of its features may not be supported by the current _OSNAME_ version or your _DISKSTATION_ model.</span> Refer to <a class="link-font" href="https://kb.synology.com/DSM/tutorial/What_to_do_when_volume_is_read_only" target="_blank">this article</a>, and try updating the _OSNAME_ version first. If the issue persists, shut down the system, remove the drives from %POOL_VOLUME_NAME%, reinstall them in the original _DISKSTATION_, and perform <span class="sm-font-bold">Online Assemble</span>."
volume_saved	=	"Saved"
volume_scan	=	"Bad sectors were found on the drive (refer to {0} for details). Do you want to run a full scan of your drive after the reboot?<br><br><font class="note-font"><b>Note: </b></font>The scanning process may take a while (approximately 25 minutes for a 1 TB drive), during which you can use Synology Assistant to monitor or cancel the process."
volume_scan_confirmed	=	"Yes, remap the drive after reboot"
volume_scan_fsck	=	"Data scrubbing has been completed successfully. We recommend you reboot the system to run a full scan of your file system."
volume_scan_fsck_note	=	"<font class="note-font"><b>Note: </b></font>The scanning process may take a while (approximately 25 minutes for a 1 TB drive), during which you can use Synology Assistant to monitor or cancel the process."
volume_scan_notification	=	"File System Scan Notification"
volume_scan_reboot_after_rebuild	=	"Reboot after remapping completes"
volume_scan_reboot_immediately	=	"Reboot now"
volume_scan_reboot_later	=	"Reboot later"
volume_scan_wait4building	=	"New bad sectors were found on the drive (refer to {0} for details). Do you want to run a full scan of your drive after the system remaps the drive and restarts your _DISKSTATION_?<br><br><font class="note-font"><b>Note: </b></font>The scanning process may take a while (approximately 25 minutes for a 1 TB drive), during which you can use Synology Assistant to monitor or cancel the process."
volume_scrubbing_type_fs	=	"File system scrubbing"
volume_scrubbing_type_raid	=	"RAID scrubbing"
volume_scrubbing_type_title	=	"Choose a data scrubbing type"
volume_select_disk_array	=	"Choose a location"
volume_select_disk_desc	=	"Please drag available drives from left to right."
volume_select_disk_source	=	"Choose drive source"
volume_select_expansion_type	=	"Choose an expansion type"
volume_select_raid	=	"Please select a RAID from the left"
volume_select_upgrade_type	=	"Choose a change type"
volume_select_volume	=	"Please select a volume from the left"
volume_service_stop_warning	=	"Choosing to continue will temporarily suspend services on the volume."
volume_set_iscsitrg_authen_title	=	"Set up iSCSI target authentication"
volume_setting_expand_size_btn	=	"Expand"
volume_setting_expand_size_desc	=	"Volume capacity can be expanded only if the storage pool has room for volume expansion. Click the <b>Expand</b> button to expand the volume capacity."
volume_setting_expand_size_title	=	"Expand Capacity"
volume_setting_mod_capacity_cur_size	=	"Current allocated capacity"
volume_setting_mod_capacity_desc	=	"You can modify the allocated capacity to expand the volume capacity."
volume_setting_mod_capacity_max_size	=	"Max. allocable capacity"
volume_setting_mod_capacity_mod_size	=	"New allocated capacity"
volume_setting_mod_capacity_title	=	"Modify Capacity"
volume_setting_rec_file_access_time_desc	=	"Specify the frequency for the system to record the access time of a file. The higher the file access frequency is, the more the system performance will be impacted."
volume_setting_rec_file_access_time_title	=	"Record File Access Time"
volume_share_encryption_unmount_warning	=	"Encrypted shared folders (if any) on the volume will be unmounted automatically. You have to manually mount them back later."
volume_share_folders	=	"Shared Folders and System Use"
volume_share_noexternal	=	"No available storage device. Please attach a compatible storage device first."
volume_share_pool_create	=	"Please go to Storage Manager to create a storage pool and volume before creating shared folders."
volume_share_position	=	"Location"
volume_share_volume_create	=	"Please go to Storage Manager to create a volume before creating shared folders."
volume_share_volumechoose	=	"Choose volume"
volume_share_volumeno	=	"No available volume. Please create a new volume."
volume_share_volumeno_router	=	"No available storage device. Please attach a storage device first."
volume_shared_cache_remove_failed_disk_suggestion	=	"SSD Cache Group {0} has been repaired but still contains a defective SSD. Check <span class="bold-font">SSD Cache Group</span> to identify the defective SSD and remove it. You can also go to the <span class="bold-font">HDD/SSD</span> page, select the defective SSD, and deactivate it (<span class="bold-font">Action</span> > <span class="bold-font">Deactivate Drive</span>)."
volume_shared_cache_remove_failed_disk_suggestion_multiple	=	"SSD Cache Group {0} has been repaired but still contains defective SSDs. Check <span class="bold-font">SSD Cache Group</span> to identify the defective SSDs and remove them. You can also go to the <span class="bold-font">HDD/SSD</span> page, select the defective SSDs, and deactivate them (<span class="bold-font">Action</span> > <span class="bold-font">Deactivate Drive</span>)."
volume_sharesize	=	"MB"
volume_shr_expand_and_convert	=	"Expand and convert to support multiple volumes"
volume_shr_repair_and_convert	=	"Repair and convert to support multiple volumes"
volume_single_bay_internal_pool_create_hint	=	"Please click Create > Create Storage Pool to use the internal drive."
volume_single_volume_on_hybrid_raid	=	"Synology Hybrid RAID (Recommended)"
volume_sink_lun	=	"LUN (Replica LUN)"
volume_size	=	"GB"
volume_size_allocated	=	"Allocated capacity"
volume_size_calculating	=	"Calculating..."
volume_size_limitation_warning	=	"Due to technical limitations, the size of a single volume is limited to {0} on certain _DISKSTATION_ models."
volume_size_system_reserved	=	"Include space used by system"
volume_sort_by_available	=	"By availability"
volume_sort_by_capacity	=	"By capacity"
volume_sort_by_id	=	"By name"
volume_sort_by_location	=	"By location"
volume_sort_by_schedule	=	"By schedule order"
volume_sort_by_status	=	"By status"
volume_sort_by_unallocated	=	"By allocated size"
volume_space	=	"Usage"
volume_space_allocation_info	=	"Used Space Info"
volume_spare_available	=	"Available"
volume_spare_disk	=	"Hot spare"
volume_spare_disk_joining	=	"Adding a spare drive..."
volume_spare_manage_desc	=	"The section below displays storage pools and the number of assigned hot spare drives. To assign a hot spare drive, please check the appropriate box in the Available Drives panel."
volume_spare_manage_title	=	"Assign hot spare drives"
volume_spare_manage_wizard_title	=	"Hot Spare Management Wizard"
volume_spare_no_protected_raid	=	"Unprotected storage pools."
volume_spare_not_available	=	"Not available"
volume_spare_protected_raid	=	"Protected Storage Pool"
volume_spared_hdd	=	"Hot Spare"
volume_ssd_consume_memory	=	"Consumed Memory"
volume_ssd_create_wizard_desc	=	"Select two SSDs to serve as cache for a specified volume or LUN."
volume_ssd_mounting	=	"Mounting"
volume_ssd_number_limit	=	"Please select two SSDs to serve as cache."
volume_ssd_trimming	=	"SSD TRIM is running"
volume_ssd_trimming_warn	=	"Currently performing SSD TRIM on {0}. Overall system performance might be affected."
volume_ssd_unmounting	=	"Unmounting"
volume_start_raid	=	"Starting RAID"
volume_status	=	"Volume Status"
volume_status_activating	=	"Activating"
volume_status_add_disk	=	"Adding drive"
volume_status_add_disk_reshape	=	"Reshaping"
volume_status_adddisksug_for_disk	=	"To expand this volume, you can add a drive to the volume or replace the existing drives with larger ones."
volume_status_adddisksug_remind	=	"The volume capacity can be expanded by adding a drive."
volume_status_adddisksug_size_not_enough	=	"The size of the unused drive is insufficient for expanding this volume."
volume_status_background	=	"Verifying drives in the background"
volume_status_background_rebuilding	=	"The _OSNAME_ is checking drives of the volume in the background. You can still use the _OSNAME_ in the meantime. Would you like to check the status now?"
volume_status_can_use	=	"The volume has been successfully created. You can start using the _OSNAME_ now."
volume_status_check_disk	=	"Checking drive"
volume_status_crashed	=	"Crashed"
volume_status_crashed_bkp	=	"<span class="red-status">Volume {0} has entered read-only status, possibly because of unexpected file system errors.</span> We recommend <a href="https://kb.synology.com/DSM/tutorial/How_to_back_up_your_Synology_NAS" class="link-font" target="_blank">backing up the data in the volume</a> or <a href="https://kb.synology.com/DSM/tutorial/How_do_I_move_data_from_one_volume_to_another" class="link-font" target="_blank">moving the data to another volume</a>. If you no longer need this volume, click its upper-right icon <div class="sm-pool-sug-more-btn-img"></div> > <span class="bold-font">Remove</span> to remove the volume. <a href="https://sy.to/rovolume" class="link-font" target="_blank">Learn more</a>"
volume_status_create	=	"Creating"
volume_status_create_fs	=	"Creating file system"
volume_status_creating	=	"The _OSNAME_ is creating the volume. Would you like to check the status now?"
volume_status_degrade	=	"Degraded"
volume_status_delayed	=	"Processing"
volume_status_delete	=	"Removing"
volume_status_deverr	=	"Unknown Error"
volume_status_diskstatus	=	"View Detailed Info"
volume_status_enable_btrfs_free_space_tree	=	"Creating cache"
volume_status_expand	=	"Adding drives"
volume_status_expand_fs	=	"Expanding file system"
volume_status_expandclick	=	"Expand"
volume_status_finalize_vol	=	"Processing"
volume_status_init_disk	=	"Initializing drive"
volume_status_initializing	=	"Needs activation"
volume_status_none	=	"none"
volume_status_normal	=	"Healthy"
volume_status_optimize	=	"Optimizing in the background"
volume_status_paritycount	=	"Checking parity consistency"
volume_status_processing	=	"Complete"
volume_status_progress	=	"Completed"
volume_status_raid_sync	=	"Performing drive check"
volume_status_readonly	=	"The volume is read-only because data consistency on this volume is incomplete. This may be caused by the bad sectors on the drive. Please back up the data on the volume before removing the volume and creating a new volume with a new drive."
volume_status_removevolume	=	"Unable to use this volume. Please remove it."
volume_status_repair	=	"Repairing"
volume_status_repair_note	=	"<span class="red-status">This storage pool has degraded.</span> Please check if your _DISKSTATION_ contains unused drives, and install a new drive if there is no unused drive. Afterward, follow the instructions in <a href="https://www.synology.com/knowledgebase/DSM/help/DSM/StorageManager/storage_pool_repair" target="_blank">this article</a> and click <div class="sm-pool-sug-more-btn-img"></div> > <b>Repair</b> or simply click <a class="link-font pool-repair-link" href="#">repair now</a> to repair the storage pool. Refer to <b>Drive Info</b> below to check the drive health status."
volume_status_repair_warning_note	=	"<div><span class="orange-status">One of the drives in this storage pool is no longer in <b>Healthy</b> status.</span> You can check <b>Drive Info</b> below to identify the defective drive.</div><div class="sm-suggestion-list"><span class="sm-suggestion-list-item"> If there are unused drives or empty slots for a new drive, you can directly <a class="link-font" href="https://kb.synology.com/DSM/help/DSM/StorageManager/storage_pool_expand_replace_disk" target="_blank">replace the defective drive</a>. If there are no unused drives or empty slots, you first need to go to the <b>HDD/SSD</b> page to select and deactivate the defective drive (click <b>Action</b> > <b>Deactivate Drive</b>). Remove the deactivated drive from its slot and install a new drive. Finally, return to this storage pool to repair it (click the storage pool's <div class="sm-pool-sug-more-btn-img"></div> ellipsis icon > <b>Repair</b>).</span></div>"
volume_status_repair_warning_note_multiple	=	"<div><span class="orange-status">Several drives in this storage pool are no longer in <b>Healthy</b> status.</span> You can check <b>Drive Info</b> below to identify the defective drives.</div><div class="sm-suggestion-list"><span class="sm-suggestion-list-item"> If there are unused drives or empty slots for new drives, you can directly <a class="link-font" href="https://kb.synology.com/DSM/help/DSM/StorageManager/storage_pool_expand_replace_disk" target="_blank">replace the defective drives</a>. If there are no unused drives or empty slots, you first need to go to the <b>HDD/SSD</b> page to select and deactivate one of the defective drives (click <b>Action</b> > <b>Deactivate Drive</b>). Remove the deactivated drive from its slot and install a new drive. Finally, return to this storage pool to repair it (click the storage pool's <div class="sm-pool-sug-more-btn-img"></div> ellipsis icon > <b>Repair</b>). Repeat these steps until all the defective drives have been replaced.</span></div>"
volume_status_repairremind_size_not_enough	=	"Detected unused drive(s) on the system, but the size is not sufficient for repairing this volume."
volume_status_replace	=	"Replacing"
volume_status_resync	=	"Re-synchronizing"
volume_status_ro	=	"Read Only"
volume_status_running_btrfs_balance	=	"Running volume optimization"
volume_status_running_fsck	=	"Running file system check"
volume_status_running_volume_stop	=	"Unmounting volume"
volume_status_scrubbing	=	"Running data scrubbing"
volume_status_start_services	=	"Starting services"
volume_status_stop_services	=	"Stopping services"
volume_status_suggest	=	"Suggestion"
volume_status_upgrade	=	"Changing RAID type"
volume_status_waiting	=	"Waiting"
volume_status_warningdelinfo	=	"Shared folders"
volume_stop_all_service	=	"All services will stop temporarily."
volume_stop_raid	=	"Stopping RAID"
volume_storage_overview	=	"Storage Overview"
volume_storage_overview_desc	=	"Displays the overall status of storage spaces, as well as the overall health of all spaces, drive utilization, volume usage, and LUN usage."
volume_storage_pool	=	"Storage Pool"
volume_storage_pool_desc	=	"Combine drives and create storage pools for more flexible storage management."
volume_storage_pool_link	=	"Click here to continue by the suggestion under storage pool settings."
volume_storage_pool_remove_failed_disk_suggestion	=	"This storage pool has been repaired. Please refer to <b>Drive Info</b> below to find out the defective drive and remove it, or simply go to the <b>HDD/SSD</b> page, select the defective drive, and click <b>Action</b> > <b>Deactivate Drive</b> to deactivate it."
volume_storage_pool_remove_failed_disk_suggestion_multiple	=	"This storage pool has been repaired. Please refer to <b>Drive Info</b> below to find out the defective drives and remove them, or simply go to the <b>HDD/SSD</b> page, select the defective drives, and click <b>Action</b> > <b>Deactivate Drive</b> to deactivate them."
volume_storage_pool_tab	=	"Storage Pool tab"
volume_submit_data	=	"Submitting data"
volume_sug_init	=	"You can activate the volume now."
volume_suggestion_crashed_lost_disk	=	"Failed to read the full data as the storage pool where the volume is located has lost some drives."
volume_suggestion_crashed_no_mount	=	"<span class="red-status">This storage pool is in risk because Volume {0} is in abnormal status.</span> To rescue your data, please sign in to your <a href="https://account.synology.com/support" target="_blank">Synology Account</a> to submit a technical support ticket. If you no longer need this volume, please go to Volume {0} and click <div class="sm-pool-sug-more-btn-img"></div> > <b>Remove</b> to remove it. Then, you can create a new one."
volume_suggestion_locked_not_support	=	"<span class="red-status">Volume {0} is in abnormal status because your _DISKSTATION_ does not support volume encryption.</span> Shut down the system to remove the drives of this storage pool. Then, install the drives into <a href="https://sy.to/encryptedvolkb" target="_blank">a model that supports volume encryption</a> and assemble the storage pool."
volume_suggestion_locked_other	=	"<span class="red-status">Unable to auto-unlock Volume {0} on startup because an error occurred.</span> Go to <span class="sm-font-bold">Global Settings</span> > <span class="sm-font-bold">Encryption Key Vault</span> to check the vault status. If the vault is unavailable, go to this volume and click <div class="sm-pool-sug-more-btn-img"></div> > <span class="sm-font-bold">Unlock</span> to unlock it manually."
volume_suggestion_locked_vault_disable	=	"<span class="red-status">Unable to auto-unlock Volume {0} on startup because the Encryption Key Vault has not been enabled.</span> Go to <span class="sm-font-bold">Global Settings</span> > <span class="sm-font-bold">Encryption Key Vault</span> to enable the vault. Then, go to this volume and click <div class="sm-pool-sug-more-btn-img"></div> > <span class="sm-font-bold">Unlock</span> to unlock it manually. Return to <span class="sm-font-bold">Global Settings</span> > <span class="sm-font-bold">Encryption Key Vault</span> to repair the vault and reactivate auto-unlocking."
volume_suggestion_pool_bkp	=	"<span class="red-status">Unrecoverable errors have occurred because drive errors occurred after storage pool degradation.</span> Please back up your data immediately; afterward, return to this storage pool and click <div class="sm-pool-sug-more-btn-img"></div> > <b>Remove</b> to remove the storage pool and then create a new one."
volume_suggestion_unlocked_not_in_vault	=	"<span class="red-status">Unable to auto-unlock Volume {0} on startup because its encryption key is not in the Encryption Key Vault.</span> Go to <span class="sm-font-bold">Global Settings</span> > <span class="sm-font-bold">Encryption Key Vault</span> to repair the vault and resolve this issue."
volume_suitable_spare_disks	=	"Available Hot Spare Drives"
volume_sync_background	=	"Rapid"
volume_sync_background_help	=	"Consistency check will be held at the background after the volume is built; comparatively it takes less time for building volume, and the volume is available for immediate use. The disadvantage is that bad sector will not be remapped during the process. If any bad sector was found during consistency check, it will fail and the volume may crash."
volume_sync_foreground	=	"Complete"
volume_sync_foreground_help	=	"Consistency check will be held during the volume building process; comparatively it takes more time, even several hours. If any bad sector was found, it will be automatically remapped. There is a low possibility that it will fail to build volume."
volume_sync_progress	=	"Consistency check progress"
volume_sync_select	=	"Select a consistency check type"
volume_sync_title	=	"Consistency check setting"
volume_sys_raid_repair	=	"The selected SSDs contain crucial system data that cannot be removed now. Please go to the {0} tab and repair any failed system partitions first."
volume_syspart_size_not_enough	=	"The system partition does not have sufficient drive space for repairing"
volume_system_disk	=	"System Drive"
volume_system_partition_fail_desc	=	"The system cannot add certain drives to the system partition. Please click the link to repair this issue."
volume_system_partition_fail_link	=	"(Repair)"
volume_system_partition_fail_repair_desc	=	"Unable to access the system partitions of certain drives. Please back up your data first and then click the <b>Repair</b> button to repair the system partitions of those drives."
volume_system_partition_fail_repair_note	=	"Before removing any drives, please note that the system must contain at least one drive to function properly."
volume_system_partition_repair_insufficient_disk_warning	=	"Unable to repair the system partition because of an insufficient number of available drives. Please make sure the drives in the system drive slots are properly connected and in a healthy status."
volume_tip	=	"Volume is made by merging several drives. According to the volume type you choose, the volume provides advantages such as space mergence, data protection, and performance improvement."
volume_total	=	"Total"
volume_totalsize	=	"Total capacity"
volume_transfer_commit_btn	=	"Convert"
volume_transfer_rw_bkp_suggestion	=	"<span class="red-status">儲存空間 {0} 曾經發生異常。</span>請盡速備份資料，並在備份資料後將此儲存空間刪除後再進行重建"
volume_transfer_rw_btn	=	"Convert to Read/Write"
volume_transfer_rw_desc	=	"{0} is Read Only means that an error has occurred. Please back up your data immediately. If you continue to write data into this volume, your data may be further damaged. Are you sure you want to continue?"
volume_transfer_rw_desc_warn	=	"I understand the risks of converting the volume to read/write, and agree to proceed."
volume_transfer_rw_notify_fail	=	"Failed to convert {0} {1} to read/write."
volume_transfer_rw_notify_success	=	"{0} {1} was converted to read/write successfully."
volume_type_basic	=	"Basic"
volume_type_description_basic	=	"With this type, you will be able to install one or more additional new drives in the future and migrate them to RAID 1 or RAID 5 for data redundancy and data protection."
volume_type_description_linear	=	"This type allows you to expand drive capacity in the future by combining more drives into a single storage pool. Data redundancy will not be supported."
volume_type_description_raid_0	=	"RAID 0 combines two or more drives to increase performance and capacity but provides no fault tolerance. A single drive failure will result in the loss of all data on the array. RAID 0 is useful for non-critical systems where a high price/performance balance is required. Please note that the capacity of a RAID 0 storage pool cannot be expanded by adding drives or replacing them with ones of larger capacity."
volume_type_description_raid_1	=	"RAID 1 is most often implemented with two drives. Data on the drives are mirrored, providing fault tolerance in case of drive failure. Read performance is increased while write performance is similar to that of a single drive. A single drive failure can be sustained without data loss. RAID 1 is often used when fault tolerance is key, while capacity and performance are not critical requirements. Please note that the capacity of a RAID 1 storage pool cannot be expanded by adding drives."
volume_type_description_raid_10	=	"RAID 10 combines the benefits of RAID 1 and RAID 0. Read and write performance is increased, but only half of the total capacity is available for data storage. Four or more drives are required making the cost relatively high, but the performance is great while providing fault tolerance at the same time. It can also sustain multiple drive failures, provided that the failures are not within the same sub-group. RAID 10 is ideal for applications with a high I/O demand, for example, database servers. Please note that the capacity of a RAID 10 storage pool cannot be expanded by adding drives."
volume_type_description_raid_5	=	"RAID 5 provides fault tolerance and increased read performance. A minimum of three drives is required. RAID 5 can sustain the loss of a single drive. In the event of a drive failure, data from the failed drive is reconstructed from parity striped across the remaining drives. As a result, both read and write performance is severely impacted while a RAID 5 array is in a degraded state. RAID 5 is ideal when space and cost are more important than performance."
volume_type_description_raid_6	=	"RAID 6 is similar to RAID 5, except it provides another layer of striping and can sustain two drive failures. A minimum of four drives is required. The performance of RAID 6 is lower than that of RAID 5 due to this additional fault tolerance. RAID 6 becomes attractive when space and cost are important and sustaining multiple drive failures is required."
volume_type_description_raid_6_petavolume	=	"RAID 6 is similar to RAID 5, but it uses two parity stripes and allows for two drive failures. This configuration requires at least four drives and has a lower performance than RAID 5 because of the added fault tolerance. RAID 6 is recommended if both capacity and cost are important considerations along with the ability to tolerate multiple drive failures. RAID 6 also allows you to create a Btrfs volume of up to 1 PB, provided that the system has a minimum memory capacity of 64 GB."
volume_type_description_raid_f1	=	"RAID F1 is exclusive to all-flash arrays and employs RAID 5 mechanism to provide one-drive fault tolerance and reduce data loss risk. It writes extra parity data to a specific drive, preventing multiple SSDs from reaching their endurance limits simultaneously. This allows you to replace individual SSDs separately instead of all at once."
volume_type_description_shr	=	"This is the recommended RAID type for beginners. Choosing this type allows you to combine drives of different sizes in the future to optimize volume size and to ensure data redundancy."
volume_type_expansion	=	"Expanded"
volume_type_linear	=	"JBOD"
volume_type_raid_0	=	"RAID 0"
volume_type_raid_1	=	"RAID 1"
volume_type_raid_10	=	"RAID 10"
volume_type_raid_5	=	"RAID 5"
volume_type_raid_6	=	"RAID 6"
volume_type_raid_f1	=	"RAID F1"
volume_type_raid_shr	=	"Synology Hybrid RAID (SHR)"
volume_type_shr_support_note	=	"High Availability is not supported on Synology Hybrid RAID (SHR) volumes."
volume_type_shr_with_1_disk_protect_help	=	"The system will optimize space allocation and support data protection with 1-drive fault tolerance."
volume_type_shr_with_2_disks_protect_help	=	"The system will optimize space allocation and support data protection with 2-drive fault tolerance."
volume_unassigned	=	"Unused"
volume_unknown_expansion	=	"Unknown"
volume_unmount_volume	=	"Unmounting volume"
volume_unmounting_cache	=	"Unmounting SSD cache"
volume_unused_disk	=	"Unused Drives"
volume_upgrade	=	"Change"
volume_upgrade_choosedisk	=	"Choose a drive to upgrade this volume."
volume_upgrade_diskdesigned	=	"Total drive number after the upgrade"
volume_upgrade_final_title	=	"Changing volume"
volume_upgrade_level	=	"Volume type after upgrade"
volume_upgrade_steps	=	"Upgrade Step"
volume_upgrade_sug_size_not_enough	=	"Detected unused drive(s) on the system, but the size is not sufficient for upgrading this volume."
volume_upgrade_tip	=	"You can use the unused drive(s) to upgrade this volume, which has no data protection now."
volume_upgrade_title	=	"Change Volume"
volume_upgrade_type_title	=	"Volume type"
volume_upgrade_welcome_tip	=	"You can change a volume type."
volume_upgrade_welcome_title	=	"Welcome to the Change Volume Wizard"
volume_usablesize	=	"Usable"
volume_usage	=	"Top Volume Usage"
volume_usage_append_text_free	=	"{0} free"
volume_usage_detail_analysing	=	"Analysing...({0}%)"
volume_usage_enable_analysis_chkbox	=	"Enable automatic usage analysis"
volume_usage_enable_confirm_msg	=	"Enable automatic usage analysis will take some time to calculate, and it may affect the system performance. Please confirm if there are other important services or tasks in progress."
volume_usage_no_data_analyzed	=	"No data analyzed. Please go to <a class="link-font syno-sm-volume-usage-link open-notification" href="#">Volume > Settings</a> to enable Usage Analysis"
volume_usage_suggestion	=	"Volume {0} is running out of available space and will affect system performance. <a href="https://sy.to/tutorial_volume_out_of_capacity" target="_blank">Install additional drives or replace drives with ones of a larger size</a> for more capacity."
volume_usage_tooltip_free_text	=	"Free"
volume_usage_tooltip_total_text	=	"Total"
volume_usage_tooltip_used_text	=	"Used"
volume_usage_usage_analysis_title	=	"Usage Analysis"
volume_usage_volume_busy_dlg_msg	=	"The previous operation about usage analysis has not been completed yet, please try again later."
volume_used	=	"Used"
volume_used_disk	=	"Used Drives"
volume_usedsize	=	"Used capacity"
volume_valid_range_warning	=	"The valid range of this value is from {0} to {1} (GB)."
volume_virtual_space	=	"Virtual Space"
volume_volumestatus	=	"Status"
volume_warn_ebox_missing	=	"The system detected that one or more volumes have crashed. Please make sure the expansion units and their drives are connected properly and then restart your _DISKSTATION_."
volume_warning_cancel_creation	=	"Warning! The action will stop process of creation. Are you sure you want to stop?"
volume_warningclear	=	"Warning! The action will erase all the data in the volume, and system will stop all services temporarily. Are you sure you want to continue?"
volume_warningclearservice	=	"This action will remove all data and configurations of services above. Are you sure you want to continue?"
volume_warningdiskmask	=	"You haven't chosen any drive yet."
volume_warninglistservice	=	"System services"
volume_wizard_sum_expand_type	=	"Expansion Type"
volume_wizard_summary_resident_pool_title	=	"Storage pool"
volume_wizard_summary_title	=	"Confirm settings"
wizard_diskstep_cache_add_select_multiple	=	"Select {0} drives to add to SSD Cache Group {1}."
wizard_diskstep_cache_add_select_multiple_atleast	=	"Select at least {0} drives to add to SSD Cache Group {1}."
wizard_diskstep_cache_add_select_single	=	"Select {0} drive to add to SSD Cache Group {1}."
wizard_diskstep_cache_add_select_single_atleast	=	"Select at least {0} drive to add to SSD Cache Group {1}."
wizard_diskstep_cache_add_select_single_atleast_mirror	=	"Select at least {0} drive to add a mirror drive to SSD Cache Group {1}."
wizard_diskstep_cache_add_select_single_mirror	=	"Select {0} drive to add a mirror drive to SSD Cache Group {1}."
wizard_diskstep_cache_create_select_multiple_atleast	=	"Select at least {0} drives to create an SSD cache group with the cache RAID type of {1}."
wizard_diskstep_cache_create_select_single	=	"Select {0} drive to create an SSD cache group with the cache RAID type of {1}."
wizard_diskstep_cache_migrate_select_multiple	=	"Select {0} drives to change the RAID type of SSD Cache Group {1} to {2}."
wizard_diskstep_cache_migrate_select_multiple_atleast	=	"Select at least {0} drives to change the RAID type of SSD Cache Group {1} to {2}."
wizard_diskstep_cache_migrate_select_single	=	"Select {0} drive to change the RAID type of SSD Cache Group {1} to {2}."
wizard_diskstep_cache_migrate_select_single_atleast	=	"Select at least {0} drive to change the RAID type of SSD Cache Group {1} to {2}."
wizard_diskstep_cache_migrate_without_new_disk	=	"The current number of drives is sufficient to change the RAID type to {0}. You can go directly to the next step or add more drives before doing so."
wizard_diskstep_cache_repair_select_single	=	"Please select {0} drive to repair SSD Cache {1}."
wizard_diskstep_cache_repair_select_single_atleast	=	"Please select at least {0} drive to repair SSD Cache {1}."
wizard_diskstep_shared_cache_repair_select_single	=	"Select {0} drive to repair SSD Cache Group {1}."
wizard_diskstep_shared_cache_repair_select_single_atleast	=	"Select at least {0} drive to repair SSD Cache Group {1}."
wizard_repair_check_shared_cache_abnormal_multiple	=	"This SSD cache group contains several SSDs in abnormal status ({0}). We recommend removing all the SSD caches that belong to this cache group and creating a new cache group with healthy SSDs. Are you sure you want to repair this cache group now?"
wizard_repair_check_shared_cache_abnormal_single	=	"This SSD cache group contains one SSD in abnormal status ({0}). We recommend removing all the SSD caches that belong to this cache group and creating a new cache group with healthy SSDs. Are you sure you want to repair this cache group now?"
wizard_repair_check_single_cache_abnormal_multiple	=	"This SSD cache contains several SSDs in abnormal status ({0}). We recommend removing the SSD cache and creating a new one with healthy SSDs. Are you sure you want to repair this SSD cache now?"
wizard_repair_check_single_cache_abnormal_single	=	"This SSD cache contains one SSD in abnormal status ({0}). We recommend removing the SSD cache and creating a new one with healthy SSDs. Are you sure you want to repair this SSD cache now?"
write_cache_desc	=	"Use at least {0} SSDs of the same drive type to create a fault-tolerant cache. The read-write cache first writes data to the SSDs to improve the random read/write performance and accelerate data access speed."
write_cache_desc_note	=	"If you choose this cache mode please do not remove the SSD cache from your _DISKSTATION_ unless the cache has been removed through Storage Manager."
write_cache_option	=	"Read-write cache"

[volume_encryption]
enable_local_vault_desc	=	"Set a password to secure your encryption key vault, which stores the encryption keys for all encrypted volumes. This password is required when you create, migrate, or unlock an encrypted volume."
enable_local_vault_enable_btn	=	"Enable"
enable_local_vault_note	=	"To change the location of the Encryption Key Vault to a remote _DISKSTATION_, go to <span class="{0}">Storage</span> > <span class="{0}">Global Settings</span> > <span class="{0}">Encryption Key Vault</span>. <a href="#">Learn more</a>"
enable_local_vault_title	=	"Enable Encryption Key Vault"
encryption_step_check_box	=	"Encrypt this volume"
encryption_step_check_box_desc	=	"The volume's encryption key is system-generated and stored in the Encryption Key Vault."
encryption_step_check_box_note_key_vault	=	"Make sure the Encryption Key Vault is available during startup to allow the system to <span class="{0}">auto-unlock</span> the encrypted volume."
encryption_step_check_box_note_perf_drop	=	"Encrypting a volume may affect its performance."
encryption_step_desc	=	"Encrypting a volume helps protect your data from unauthorized access in case your device is lost or stolen. All data stored on the volume, including package data and LUNs, will be protected. <a href="#">Learn more</a>"
encryption_step_err_vault_acting	=	"The Encryption Key Vault is busy. Please try again later."
encryption_step_err_vault_disconnect_ext_dev	=	"Make sure your external device is plugged in. Once plugged in, it should appear under <span class="{0}">Control Panel</span> > <span class="{0}">External Devices</span>."
encryption_step_err_vault_disconnect_remote	=	"Make sure the KMIP server is powered on and set up correctly. For more information, go to <span class="{0}">Control Panel</span> > <span class="{0}">Security</span> > <span class="{0}">KMIP</span>."
encryption_step_err_vault_disconnect_title	=	"Unable to access Encryption Key Vault"
encryption_step_title	=	"Configure encryption"
keep_key_notice_confirm	=	"OK"
keep_key_notice_desc	=	"The encryption key vault has been enabled. You can use the recovery key to unlock volumes if the key vault is inaccessible. Without the recovery key, you may not be able to access your data. To regenerate a recovery key, refer to <a class="link-font" href="https://kb.synology.com/DSM/help/DSM/StorageManager/volume_create_volume" target="_blank">this article</a>."
keep_key_notice_title	=	"Keep your recovery key in a secure location and back it up to another device."
key_vault_acting_repair	=	"Repairing"
key_vault_acting_reset	=	"Resetting"
key_vault_cannot_disable_err	=	"Encryption Key Vault cannot be disabled while an encrypted volume exists."
key_vault_confirm_password	=	"Confirm password"
key_vault_confirm_password_err	=	"The vault password and the confirmation password do not match."
key_vault_desc	=	"<a href='#'>Encryption Key Vault</a> allows you to securely store and centrally manage the encryption keys of encrypted volumes."
key_vault_enable_check_box	=	"Enable Encryption Key Vault"
key_vault_enable_fail_msg	=	"Unable to save changes. Make sure your KMIP server is connected to the system and then try again."
key_vault_enable_toast	=	"Encryption Key Vault enabled."
key_vault_external_device	=	"External device"
key_vault_external_device_tip	=	"Make sure your external device is plugged in. Once plugged in, it should appear under <a href='#'>Control Panel > External Devices</a>."
key_vault_host_name	=	"Hostname"
key_vault_local_machine	=	"Local"
key_vault_local_tip	=	"The volume encryption keys are stored locally."
key_vault_mgr_desc	=	"Set a password to secure your encryption key vault. This password is required when you create, migrate, or unlock an encrypted volume."
key_vault_mgr_title_enable	=	"Manage Encryption Key Vault"
key_vault_mgr_title_reset	=	"Reset Encryption Key Vault"
key_vault_password	=	"Vault password"
key_vault_password_confirm_desc	=	"Enter the password of your Encryption Key Vault to continue."
key_vault_password_confirm_title	=	"Enter password"
key_vault_password_err_include_invalid_chr	=	"Password cannot contain invalid characters."
key_vault_password_err_invalid	=	"Invalid password. Please try again."
key_vault_password_err_less_min_length	=	"Minimum password length is 8 characters."
key_vault_password_forget_link	=	"<a href="#">Forgot password?</a>"
key_vault_password_tip	=	"Set a password to secure your local vault. This password is required every time you create or migrate an encrypted volume."
key_vault_remote_key_server	=	"KMIP server"
key_vault_remote_key_server_tip	=	"The volume encryption keys are stored on another _DISKSTATION_ (remote key server). Go to the <a href='#'>KMIP</a> tab to set up a remote key server."
key_vault_repair_btn	=	"Repair"
key_vault_reset_btn	=	"Reset"
key_vault_reset_button_note	=	"You can enable <a href='#'>Automatically lock encrypted storage entities</a> to protect the key vault and encrypted data. The key vault will be erased and disabled after a manual system reset."
key_vault_reset_desc	=	"Resetting the encryption key vault allows you to change the key vault location and vault password. This will generate new volume encryption keys that replace the existing ones in the key vault."
key_vault_reset_err_has_acting_volume	=	"The Encryption Key Vault is busy. Please try again later."
key_vault_reset_err_has_locked_volume	=	"One or more encrypted volumes are locked. Unlock these volumes and then try again."
key_vault_reset_note	=	"Resetting the Encryption Key Vault also resets all the volume encryption keys. The system will generate new keys to replace existing ones."
key_vault_share_folder	=	"Shared folder"
key_vault_share_folder_err_no_select	=	"Select a shared folder."
key_vault_status	=	"Vault status"
key_vault_status_connected	=	"Connected"
key_vault_status_disconnected	=	"Disconnected"
key_vault_status_disconnected_tip_remote	=	"Unable to connect to your <a href='#'>KMIP server</a>."
key_vault_status_disconnected_tip_usb	=	"Unable to connect to your <a href='#'>external device</a>. Make sure it is plugged in and detected."
key_vault_status_disconnected_tip_usb_unsupport	=	"This _DISKSTATION_ does not support external devices. Before resetting the Encryption Key Vault, you must manually unlock all the encrypted volumes using their respective recovery key."
key_vault_store_location	=	"Vault location"
key_vault_title	=	"Encryption Key Vault"
key_vault_upgrade_and_reset_btn	=	"Upgrade and Reset"
key_vault_upgrade_suggestion	=	"A new unlocking method is available for encrypted volumes, allowing you to unlock volumes using the vault password. This method requires a one-time <a href="#" link-id='gotoGlobalSetting'>upgrade and reset</a> of your key vault. <a href="https://sy.to/upgrade-encryption-key-vault" class="link-font" target="_blank">Learn more</a>"
key_vault_upgrade_tip	=	"After upgrading and resetting, you can unlock encrypted volumes directly using the vault password. The upgrade process takes only a few minutes. <a href="https://sy.to/upgrade-encryption-key-vault" class="link-font" target="_blank">Learn more</a>"
passwd_for_unlock_vol	=	"Vault password"
recovery_key	=	"Recovery key"
recovery_key_desc	=	"Each encrypted volume has its own recovery key. If you lose this key, you must regenerate a new key to replace the old one."
recovery_key_downloaded_check_box	=	"I've securely stored the recovery key and vault password. I understand the consequences of losing them"
recovery_key_downloaded_desc_remind	=	"Note the following"
recovery_key_downloaded_desc_rk_lost_warn	=	"Keep your recovery key in a secure location and back it up to another device."
recovery_key_downloaded_desc_rk_usage	=	"Use vault password or recovery key to unlock the volume when the key vault is unavailable. If both are lost, your data will be no longer accessible."
recovery_key_err_invalid	=	"Invalid recovery key. Please try again."
recovery_key_generating	=	"Generating recovery key..."
recovery_key_last_gen_date	=	"Last generated"
recovery_key_lost_action_note	=	"If you forget the vault password, reset the key vault to set a new one. If the recovery key is lost, regenerate it in <span class="sm-font-bold">Volume</span> > <span class="sm-font-bold">Settings</span>. These operations apply only to unlocked volumes."
recovery_key_regenerate_btn	=	"Regenerate"
recovery_key_regenerating	=	"Regenerating"
recovery_key_title	=	"Recovery Key"
spin_unlocking	=	"Unlocking..."
step_in_progress	=	"Processing"
summary_step_key_encryption	=	"Encryption"
summary_step_note	=	"The system will automatically download the recovery key for this volume once you click Apply."
unlock_btn	=	"Unlock"
unlock_not_in_vault_shutdown_warn	=	"At least one encrypted volume does not have its encryption key stored in the Encryption Key Vault. As a result, the system will not be able to auto-unlock the volume on the next startup. Go to the Storage Manager to resolve this issue."
unlock_win_desc	=	"Import the recovery key of {0} to unlock it."
unlock_win_desc_with_passwd	=	"Enter the vault password or import the recovery key to unlock {0}."
unlock_win_repair_auto_unlock_check_box	=	"Repair the local Encryption Key Vault"
unlock_win_repair_auto_unlock_desc	=	"Enter your vault password to repair the local vault and reactivate auto-unlocking on startup."
unlock_win_repair_auto_unlock_tip	=	"Auto-unlocking at startup has been deactivated for this volume because its encryption key is not in the Encryption Key Vault."
unlock_win_title	=	"Unlock Encrypted Volume"
volume_encryption_enabled	=	"Enabled"
volume_encryption_support	=	"Volume encryption"
volume_status_repairing_vault	=	"Repairing Encryption Key Vault"
volume_status_resetting_vault	=	"Resetting Encryption Key Vault"
volume_status_unlocking	=	"Unlocking"

[volume_unlock]
attention_content	=	"Skipping this step will erase the Encryption Key Vault and prevent the system from automatically unlocking your encrypted volumes. Note that some packages and services may be unavailable as a result."
attention_note	=	"The system will restart after you click OK."
attention_title	=	"Some packages and services may be unavailable"
bullet_item_note1	=	"If you skip this step, the vault will be erased and disabled. You will need to re-enable the vault and unlock each encrypted volume with the vault password or recovery key."
bullet_item_note2	=	"After you submit the vault password, the system will automatically restart."
description	=	"Enter the vault password of your Encryption Key Vault to allow the encrypted volumes to be auto-unlocked on startup."
header	=	"One or more encrypted volumes are detected"
reach_limit_error	=	"Incorrect password. You have {0} attempts left."
reach_limit_info	=	"No more attempts left. Skip this step and manually unlock each encrypted volume later."
restart_description	=	"Your {0} will be ready in approximately 10 minutes. Please do not turn off the power during this process."
restart_title	=	"Restarting your {0}"
validate	=	"Submit"
validate_later	=	"Skip"

[vpnc]
adv_setting	=	"Advanced Settings"
adv_setting_desc	=	"Please specify the advanced settings"
advance	=	"Advanced"
alt_max_config	=	"Failed to add the profile because the number of profiles has reached the maximum limit."
alt_no_config_select	=	"Please select a profile first."
app_name	=	"VPN"
app_vpn_server	=	"VPN Server"
auth	=	"Authentication"
auto_reconnect	=	"Reconnect when the VPN connection is lost"
basic_setting	=	"General Settings"
basic_setting_desc	=	"Please specify the general settings"
ca_no_file	=	"Please import the certificate from the VPN server"
certificate	=	"Certificate"
client_cert	=	"Client certificate"
client_ip	=	"IP address"
client_key	=	"Client key"
client_type	=	"VPN Connection Method"
commfail	=	"Connection failed"
compress	=	"Enable compression on the VPN link"
confirm_connect	=	"Only one active connection is allowed at the same time. Are you sure you want to stop the connection of "{0}" and activate the connection of this profile?"
confirm_settingchange	=	"Do you want to apply the changes to the profile before proceeding?"
conflict_connect	=	"The {0} is connecting now. Please try again later."
conn_status	=	"Status"
connect	=	"Connect"
connected_time	=	"Connected time"
connecting_retry	=	"Reconnected"
create_profile	=	"Create Profile"
create_vpn	=	"Create VPN profile"
crl_verify_pem	=	"Certificate Revocation List"
disconnect	=	"Disconnect"
encrypt	=	"Encryption"
err_auth	=	"Authorization required"
err_illegal_ca	=	"Invalid certificate. Refer to {0}this article{1} for more information."
err_invalid_ca	=	"Connection failed or certificate expired. Please use a valid certificate issued by the VPN server and try again."
err_ipsec_fail	=	"IPSec negotiation failed. Please check the following:<ol><li>Pre-shared key is correct.</li><li>Port used for VPN service is configured on network devices (such as firewalls, NAT, or routers) between the _DISKSTATION_ and VPN server, or enable the option 'Server is behind a NAT device'.</li></ol>"
err_l2tp_fail	=	"L2TP connection failed. Please check your profile settings and try again."
err_server_refuse	=	"Connection failed. Please check your profile settings and try again."
err_server_timeout	=	"Connection failed. Please make sure:<ol><li>The server address is correct.</li><li>The port used for VPN service is configured on the network devices (such as firewalls, NAT, or routers) between your _DISKSTATION_ and the VPN server.</li></ol>"
import_ca	=	"Import certificate"
import_ca_desc	=	"Please import the certificate from the OpenVPN server"
internet_sharing	=	"Allow other network devices to connect through this Synology server's Internet connection"
invalid_psk	=	"Invalid pre-shared key"
l2tp_conflict	=	"Connection failed. Please go to Main Menu > VPN Server to disable L2TP/IPSec server and try again."
name_conflict	=	"The profile name is already in use. Please enter a different name."
ovpn_conf	=	"Import .ovpn file"
ovpn_no_file	=	"Please import .ovpn file from the VPN server."
ovpn_private_key_not_support	=	"OpenVPN cannot support private key with password"
ovpn_server_cert_suggestion	=	"Import of certificate is not necessary if the configuration file (.opvn) was exported from Synology's VPN Server or VPN Plus Server."
ovpnfile_invalid_format	=	"The .ovpn file contains invalid parameters. Please import a different file."
password	=	"Password"
pppoe_conflict	=	"VPN and PPPoE connection (at "Main Menu" > "Control Panel" > "Network" > "Network Interface") cannot be enabled at the same time."
profile_name	=	"Profile name"
pswd_preshared	=	"Pre-shared key"
received	=	"Received"
redirect_gw	=	"Route all client traffic through the VPN server"
remote_gateway	=	"Use default gateway on remote network"
remove_connected	=	"Deleting this profile will also stop its current connection. Are you sure you want to continue?"
select_vpnc_type	=	"Please select VPN connection method"
sent	=	"Sent"
server_behind_nat	=	"The server or clients are behind the NAT device"
status_connected	=	"Connected"
status_connecting	=	"Connecting..."
status_disconnected	=	"Not connected"
tls_auth_key	=	"TLS-auth key"
type_l2tp	=	"L2TP/IPSec"
type_ovpn	=	"OpenVPN"
type_ovpn_conf	=	"OpenVPN (via importing a .ovpn file)"
type_pptp	=	"PPTP"
user	=	"User name"
vpn_method	=	"VPN method"
vpn_server	=	"Server address"
vpns_conflict	=	"Connection failed. Please go to "Main Menu" > "VPN Server" to disable OpenVPN server and then try again."
waiting	=	"Waiting..."

[vtype]
bad_backup_destination	=	"The backup destination name is invalid or contains invalid characters."
bad_backup_target	=	"The target name is invalid or contains invalid characters."
bad_beepduration	=	"Please enter a duration between 1-600 seconds."
bad_dar_profile_name	=	"Use only letters, numbers and space characters. Do not use preserved words such as <b>template</b>, <b>lang</b> and <b>global</b>. The name cannot start or end with a space."

[wallpaper]
error_migrate	=	"Unable to select from My Images because there is no volume available. Please contact your system administrator."
error_unknown	=	"Failed to apply wallpaper due to unknown errors, please contact the system administrator."

[web_assistant_mobile]
web_asst_mobile_diskstation_info	=	"Setup Password"
web_asst_mobile_err_no_disk	=	"No disks found. Please turn off your _DISKSTATION_, install disks and then continue installation."
web_asst_mobile_formatting	=	"Formatting system partition..."
web_asst_mobile_hint	=	"All data will be cleared on the drives. Please back up them before proceeding."
web_asst_mobile_info	=	"After the installation, you will be redirected to the login page."
web_asst_mobile_setup_network	=	"Setup Network"
web_asst_mobile_shr	=	"Create Synology RAID"
web_asst_mobile_start	=	"Tap Start to setup your _DISKSTATION_"
web_asst_mobile_title	=	"Web Assistant"

[web_portal]
no_one_enable	=	"You have to select at least one user."

[webwizard]
apply_right_msg	=	"Assigning privileges."
apply_share_msg	=	"Creating the "web" shared folder."
apply_startserv_msg	=	"Enabling Web Station"
final_descr	=	"To create a website:<ol><li>Use your computer's file manager (Windows Explorer, Mac Finder, etc) to access the <b>web</b> shared folder on your _DISKSTATION_.</li><li>Upload your web pages.</li><li>Name the homepage file to <b>index.php</b>, <b>index.htm</b>, or <b>index.html</b>.</li><li>Connect to {0} to view your website.</li></ol>To publish your website to the Internet, run the Internet Access Wizard."
finalstep_title	=	"Finished"
long_descr	=	"Create a website and host dynamic PHP content"
short_descr	=	"Web Station"
welcome	=	"The wizard will help you do the following:<p><ul><li>Create the <b>web</b> shared folder.</li> <li>Apply Read/Write privileges to admin.</li> <li>Enable Web Station.</li></ul><p>"
welcome_title	=	"Welcome to the Web Station Wizard"
wizard_title	=	"Web Station Wizard"

[welcome]
Timezone	=	"Time zone"
access_anywhere	=	"Access your _DISKSTATION_ from anywhere"
access_anywhere_desc	=	"QuickConnect is a free service that lets you access your Virtual DSM via a secure custom address and access media or files from any device with an internet connection."
active_insight	=	"Around-the-clock monitoring and protection"
active_insight_assign_license_desc	=	"24/7 health monitoring service is still not enabled until you assign a valid license to this _DISKSTATION_. You can manage your licenses in your <a class="link-font" target="_blank" href="https://insight.synology.com/subscription">Active Insight web portal</a> later."
active_insight_desc	=	"As a 24/7 monitoring service, Active Insight allows you to check the overall status of your _DISKSTATION_ via a web portal and sends notifications of system abnormalities. Detailed steps for troubleshooting issues are included in each notification."
active_insight_tray_desc	=	"To enable full functionality of 24/7 health monitoring, go to Active Insight web portal > Subscription to assign a license to this _DISKSTATION_."
active_insight_tray_title	=	"Active Insight Setup"
agree_active_insight	=	"Enable Synology Active Insight"
agree_udc	=	"I agree to allow Synology to collect non-identifiable data to help improve Synology services"
amfa_alert_msg	=	"We strongly recommend enabling 2FA or Adaptive MFA to protect your account from potential risks. Are you sure you want to proceed without it?"
amfa_btn_give_up	=	"I don't want to secure my account"
amfa_btn_resend	=	"Resend Verification Email"
amfa_btn_verify	=	"Verify"
amfa_check_mail_msg	=	"A verification email has been sent. Please check your mailbox."
amfa_done_desc	=	"Adaptive MFA has been enabled. If the system detects suspicious login attempts, you will be asked to verify your identity through the email address below."
amfa_email_input	=	"Enter your email address"
amfa_verify_email_desc	=	"To configure Adaptive MFA, verify your email address."
apply_network_failed	=	"Failed to apply network setting. Please go to Control Panel > Network to set up your static IP address."
auto_enable_amfa_desc	=	"To protect your account, <a class="link-font" href="https://sy.to/whatisamfa" target="_blank">Adaptive Multi-Factor Authentication</a> (Adaptive MFA) has been enabled by default. If the system detects suspicious login attempts, you will be asked to verify your identity through your email address. <a class="link-font" href="https://www.synology.com/en-global/company/legal/privacy" target="_blank">Synology Privacy Statement</a>."
auto_enable_amfa_title	=	"You are protected by Adaptive MFA"
cancel_upgrade_warning	=	"Discarding the update process and redirecting to _OSNAME_. You can update _OSNAME_ later in <b>Control Panel</b> > <b>Update & Restore</b> > <b>_OSNAME_ Update</b>."
change_email_hint	=	"If you want to change your email address, go to <b>DSM</b> > <b>Personal</b> > <b>Account</b>."
choose_encryption_type	=	"Choose the type of data encryption to use"
click_termsofservice_accept	=	"When you click [Install], you agree to the <a href="{0}" class="pathlink" target="_blank">Package Center Terms of Services</a>"
cluster_creating_desc	=	"Cluster is creating... ({0}%)"
cluster_creating_title	=	"Configuring..."
cluster_name	=	"Cluster name"
cluster_network	=	"Cluster network"
cluster_network_desc	=	"This network is for node communication. System will setup it automatically."
conf_backup_desc	=	"Regularly backing up your system settings allows you to quickly set up a new device or restore settings to new or existing devices."
conf_backup_title	=	"DSM configuration backup"
confbkp_welcome_desc	=	"You have set up automatic DSM configuration backup for your _DISKSTATION_. With this service enabled, Synology will collect your system configurations. Check out our <a target="_blank" href="https://www.synology.com/company/legal/privacy">Privacy Statement</a> for more information."
confbkp_welcome_enable_desc	=	"Sign in to your Synology Account to set up automatic DSM configuration backup for your _DISKSTATION_. With this service enabled, Synology will collect your system configurations. Check out our <a target="_blank" href="https://www.synology.com/company/legal/privacy">Privacy Statement</a> for more information."
confbkp_welcome_title	=	"New Synology Services"
confirm_login_discard_title	=	"Login will be canceled"
confirm_registration_discard_desc	=	"Are you sure you want to leave without completing the process?"
confirm_registration_discard_title	=	"Registration will be discarded"
create_admin_desc	=	"Name your _DISKSTATION_ and create an administrator account. Use this account to sign in to _DISKSTATION_. Set a strong password that will be hard for others to guess."
create_admin_fail	=	"Failed to create new administrator account. For security reasons, please deactivate the admin account or change its password."
create_syno_account_subtitle	=	"Take advantage of more services and features offered by Synology Account. {0}Learn about how we use your data{1}"
create_syno_account_title	=	"Create a Synology Account to receive more benefits"
create_volume_failed	=	"Unable to create volume. Please sign in to DSM, then go to Storage Manager to check the status of your drives."
data_network	=	"Data network"
data_network_desc	=	"This network provides user public service (e.g. SMB). You will set it up while you need to use it."
diagnotics_feedback	=	"Opt-in for a better user experience"
email_notification_desc	=	"Enable to receive timely notifications whenever changes occur on your Synology NAS. This allows you to take responsive action depending on the event's level of urgency."
email_notification_title	=	"Email Notification"
enable_conf_backup	=	"Enable backing up to Synology Account regularly"
enable_email_notification	=	"Enable notification service to receive notification messages via Synology's email server"
enable_fast_support	=	"Enable Diagnosis Service"
end_apply_msg	=	"Applying general settings"
end_apply_network_msg	=	"Applying network settings"
error_exist_myds_account	=	"One or more Synology Accounts are found in your _DISKSTATION_. Please log in with the exisiting account or skip this step."
error_no_quickconnect_id	=	"Enter a QuickConnect ID."
error_quickconnect_exist	=	"The QuickConnect ID entered already exists. Please enter a different one."
error_quickconnect_invalid	=	"The device name must begin with a letter, and can include letters or numbers."
eula	=	"EULA"
fast_support_title	=	"Support Center: Diagnosis Service"
find_privacy_checkbox	=	"Share my Synology device's network location to allow me to locate it via find.synology.com. I have read and agreed to the <a target="_blank" href="https://www.synology.com/company/legal/terms_conditions_account">Terms of Service</a>  and acknowledged the <a  target="_blank" href="https://www.synology.com/company/legal/privacy">Privacy Statement</a>."
forget_myds_passwd	=	"<a class="pathlink" target="_blank" href="https://account.synology.com/support/register_password_remind.php">Forgot your password?</a>"
go_to_active_insight_portal	=	"Open Web Portal"
got_it	=	"Got It"
hotfix_security_tip	=	"The system will automatically install updates that have fixed critical security issues and bugs to protect your NAS. We highly recommend choosing this option."
hotfix_security_update	=	"Automatically install important DSM and package updates only (Recommended)"
hotfix_update	=	"Automatically install the latest DSM and package updates"
important_update_option	=	"Auto-update DSM and all packages to important versions"
install_patch_automatically_download	=	"Automatically download the latest version from Synology website"
install_patch_desc	=	"DiskStation Manager (_OSNAME_) is the operating system running on _DISKSTATION_."
install_patch_download_patch_tip	=	"Download a patch from {0}Synology Download Center{1}."
install_patch_manually_upload	=	"Manually upload a .pat file from your computer."
install_patch_title	=	"Install DiskStation Manager"
install_surv_station_in_pkgcenter	=	"Failed to install Surveillance Station. Please go to <a data-syno-app="SYNO.SDS.PkgManApp.Instance">Package Center</a> to install Surveillance Station."
install_surveillance_create_volume_failed	=	"Unable to create volume. Please sign in to DSM, then go to Storage Manager to check the status of your drives."
install_surveillance_creating_volume	=	"Creating volume..."
install_surveillance_failed	=	"Unable to install Surveillance Station. Please sign in to DSM, then go to Package Center and try installing it again."
install_surveillance_installing	=	"Installing Surveillance Station..."
install_surveillance_login_first	=	"Sign in"
install_surveillance_login_first_desc	=	"The installation of Surveillance Station applications is in progress, meanwhile, DSM is ready for use. You can sign in first and the installation will continue in the background."
install_surveillance_title	=	"Creating the volume and installing essential applications"
installing_pkgs_body	=	"Installation is almost ready. Please wait."
installing_pkgs_title	=	"Installing built-in packages... ({0}/{1})"
keep_up_to_date_desc	=	"Due to network error, system update cannot be completed at this time. However, it is important to keep the system up-to-date to receive the latest features and security fixes. You can continue the update later. For more information, please refer to <a class="link-font" href="https://www.synology.com/knowledgebase/DSM/tutorial/General_Setup/DSM_update_how_to_manually_update" target="_blank">this article</a>."
key_default_service_ip	=	"Default service ip"
know_more	=	"More info"
later	=	"Later"
latest_update_option	=	"Auto-update DSM and all packages to the latest versions"
load_region_list_failed	=	"Failed to connect to Synology server. Please check your network connectivity and try again."
loading	=	"Loading..."
login_now	=	"Sign In Now"
management_network	=	"Management network"
management_network_desc	=	"This network is for user to manage this system. System will setup it automatically."
manually_enable_amfa_desc	=	"<a class="link-font" href="https://sy.to/whatisamfa" target="_blank">Adaptive Multi-Factor Authentication</a> (Adaptive MFA) is here to protect your account. If the system detects suspicious login attempts, you will be asked to verify your identity through your email address. <a class="link-font" href="https://www.synology.com/en-global/company/legal/privacy" target="_blank">Synology Privacy Statement</a>."
manually_enable_amfa_title	=	"Protect your account with Adaptive MFA"
mib_welcome_desc	=	"You have set up the 24/7 monitoring service and DSM configuration automatic backup for your _DISKSTATION_. With the services enabled, Synology will need to collect your device information and system configuration. Check out our <a target="_blank" href="https://www.synology.com/company/legal/privacy">Privacy Statement</a> for more information."
mib_welcome_enable_desc	=	"Sign in to your Synology Account to set up Synology Active Insight ─ the 24/7 monitoring service ─ and DSM configuration automatic backup for your _DISKSTATION_. With the services enabled, Synology will need to collect your device information and system configuration. Check out our <a target="_blank" href="https://www.synology.com/company/legal/privacy">Privacy Statement</a> for more information."
mib_welcome_title	=	"New Synology Services"
min_password_length	=	"at least six characters"
myds_register	=	"Synology Account information"
need_real_name_valid	=	"If you wish to use the Synology QuickConnect service in China, please sign in to <a href="https://sy.to/cnaccountlogin" target="_blank" rel="noopener noreferrer">account.synology.cn</a> to bind your phone number first.<br>If the location of your Synology Account is not China, please go to <a href="https://sy.to/globalaccountlogin" target="_blank" rel="noopener noreferrer">account.synology.com</a> > Profile > Contact Information and change your location to China, or create an account on the <a href="https://sy.to/cnaccountlogin" target="_blank" rel="noopener noreferrer">account.synology.cn</a> website. <a href="
https://www.synology.com/knowledgebase/DSM/tutorial/Service_Application/bind_phone_number_to_Synology_Account" target="_blank" rel="noopener noreferrer">Learn more</a>"
network_setup_desc	=	"Configure a static IP address to enable network interface protection"
network_setup_desc_tip	=	"Please make sure the entered static IP address is not in the DHCP scope of the network environment. The configurations will be applied to the currently connected network interface. The remaining network interfaces can be configured in Control Panel > Network."
network_setup_skip_msg	=	"You may configure a static IP address to the network interfaces later in Control Panel > Network > Network Interface in DSM. Do you want to skip this step now?"
network_setup_title	=	"Set up Network Interface"
notify_update	=	"Notify me when DSM or package updates are available and I will install them manually"
open	=	"Open"
package_privacy_checkbox	=	"I acknowledged the Privacy Statement"
package_privacy_content	=	"<h1>PRIVACY STATEMENT</h1><h2>Introduction</h2><p>Synology holds itself to high standards in handling and processing personal information. The statement outlined below establishes the boundaries of what Synology processes and what you, as our customer and the data subject ("<strong>users</strong>"), are entitled to. This Privacy Statement applies when you use our features and services ("<strong>Services</strong>"). Additionally, we have a Cookie Policy for use of our website.</p><p>Synology operates around the world and has adopted English as the controlling language of this Privacy Statement. Additional translations are provided for convenience. You may switch to other languages by using the language selection button at the bottom of the webpage.</p><p>This Privacy Statement applies to Synology-provided services offered on Synology-owned websites, Synology-branded applications, services provided from physical Synology products ("<strong>Synology Devices</strong>"), and digital or physical services directly offered by Synology. For specific programs, products, or Services offered by Synology, individual Service-specific privacy policies may supersede and prevail over this Privacy Statement or supplement this Privacy Statement in relevant parts.</p><h2>Your Personal Data</h2><p>Personal data refers to identifying information that relates to, describe, is capable of being associated with, or can reasonably be linked directly or indirectly to, an individual or a household. Identification can be by the data alone or in conjunction with any other data in the data controller's possession or likely to come into such possession. Synology collects information only to provide you with the Services and to improve user experiences. To provide you with Synology Devices or Services, including responding to your inquiries, we may ask for your personal information. If you choose not to provide the requested information, we may be unable to deliver the desired Services. Most of Synology's Services are provided under a Synology Account, and if you no longer require the Service or wish to have your data removed, you may delete your Synology Account.</p><p>In general, Synology collects personal data from you through your use of our Services. Synology also uses cookies and other technologies to gather information regarding a visitor's browsing preferences. The data we collect and store from you, including in the preceding 12 months, may consist of the following data categories:</p><ul><li>Contact Information: Your e-mail address (used as identification for our services and as the primary communication method), name, address, phone number, and additional contact detail that are used to provide registration, device shipping, and billing verification services.</li><li>Commercial information: Your payment method and financial data (credit card, bank account number, etc.), which is used for payment transactions for a service or product, logistics, and billing data (such as customs ID and tracking number).</li><li>Technical Information: Your IP address, device's location (latitude and longitude), unique device identifiers, referral URL, computer and connection data (such as the type of operating system you use, device and software information, browser type, browser language and version, ad data, access times, Internet or other network activity such as weblog information) used for fraud prevention, security purposes, warranty registration, customer support services, providing desired functionality, and for transactions.</li><li>Account Information: Your account name, Internet, or other network activity information such as account login, account activity, transaction data, and any information you provide during a transaction, or other transaction-based content that you generate or connected to your account as a result of your transaction.</li><li>Communication History: Your chat and service history with us, and any other information you may provide us when you interact with us.</li></ul><p>Other information that you provide to us through digital or physical means may be stored on a case-by-case basis depending on the reason it was provided.</p><p>Synology does not access (or use) files uploaded by users to their devices.</p><p>Learn more from our <strong><a target="_blank" href="https://www.synology.com/company/legal/Services_Data_Collection_Disclosure">Services Data Collection Disclosure</a></strong> for specific Services and <strong><a target="_blank" href="https://www.synology.com/company/legal/cookie_policy">Cookie Policy</a></strong> for specific information on the data processed and ways they are stored for each Service.</p><h2>Lawful Bases and Other Usage</h2><p>The lawful bases for Synology to process your personal data for the various types of processing performed on your personal data are, as applicable, processing based on your consent, as necessary for us to enter into and to perform our contract with you, or in certain circumstances, as necessary for Synology to pursue our "legitimate interests", where our interests are not outweighed by your rights and freedoms.</p><p>"Legitimate interest" situations necessitating such actions may include the following: to protect you, us, or others from security threats, to comply with laws we are subjected to, to implement information sharing within Synology's group affiliates, to prevent fraud, misuse of company IT systems, to operate a whistleblowing scheme, for purposes of mergers and acquisitions, and to perform internal investigations and auditing.</p><p>Synology will collect, process, and use the personal data supplied by you only for the purposes communicated to you and will not disclose your data to third parties except under the lawful bases set forth above. Synology does not share your personal information with third parties for the purpose of direct marketing. Synology also does not engage in the selling of personal data to any third party.</p><p>The purposes for which Synology collects and processes personal data may include, but not limited to:</p><ul><li>Operating our websites to provide you access to and use of our websites and Services;</li><li>Administering your use of our Services, to communicate with you and respond to your requests;</li><li>Managing your Synology Account;</li><li>Customizing your Service experience with us, to improve our Services and products;</li><li>Providing you with our online or offline marketing measures and activities; including but not limited to newsletters, online and live event registrations, and other promotional information and materials; </li><li>Sharing your contact details with our subsidiaries, affiliates, authorized repair and support centers, authorized logistics companies, communications infrastructure, and other entities deemed necessary to carry out providing these Services to you;</li><li>Sharing your contact details with our affiliate offices around the world within our group of companies for the purposes of internal administration and back-office support;</li><li>Ensuring our network security, and to prevent fraud;</li><li>Enforcing or defending our policies or contract with you; and </li><li>Maintaining the integrity and safety of our data technology systems that store and process your personal data. </li></ul><p>You are not under any obligation to provide us any of your personal data. However, please note that without certain data from you, we may not able to undertake some or all of our obligations to you under our contract with you, or adequately provide you with our full range of services. If you would like to obtain more detail about this, please contact us following the instructions in the "Contact Information" section below.</p><h2>Period of Storage</h2><p>Synology keeps your personal data for no longer than reasonably necessary for the given purpose for which your data is processed. If you will provide us, or have provided us, consent for us to process your data, we will process your data for no longer than your consent is effective. Notwithstanding the above, we may retain your personal data as required by applicable laws and regulations, as necessary to assist with any government and judicial investigations, to initiate or defend legal claims or for the purpose of civil, criminal, or administrative proceedings. If none of the above grounds for us to keep your data apply, we will delete and dispose of your data in a secure manner.</p><h2>Data Controllers, Contracting Parties, Transfer of Data</h2><p>We use the term "<strong>Designated Areas</strong>" to refer to the residential locations that are in the European Union (EU), European Economic Area (EEA), and Switzerland.</p><p>If you reside in the Designated Areas, <strong>Synology Inc.</strong> will be the controller of your personal data, except under limited circumstances where Synology holds marketing events in Germany, France, or the United Kingdom, for which <strong>Synology GmbH</strong>, <strong>Synology France SARL</strong>, or <strong>Synology UK Ltd</strong> will respectively be the controller of your personal data. Other than for such limited circumstances, <strong>Synology Inc.</strong> will be responsible for collecting and processing data for our Services, which will be covered by the Terms of Service of the relevant Services.</p><p>If you reside outside the Designated Areas, <strong>Synology Inc.</strong> will be the controller of your personal data. Your usage of services provided by Synology will be bound by the Terms of Service of the relevant Services.</p><p>Synology's Services include providing data processing, order fulfillment, technical support, device replacement, payment invoicing, processing and collection, event registration, customer services, marketing support, as well as the transfer of data based on users' decisions, around the world. The nature of these Services requires us to be able to transfer your personal data into and out of the European Union (EU) to Synology affiliates including <strong>Synology GmbH</strong> and <strong>Synology Inc.</strong>, authorized repair and support centers, authorized logistics companies, communications infrastructure, and other entities deemed necessary to carry out providing these Services. We may also transfer your data to third-party service providers whom we subcontract to work on our behalf or for us and therefore may have access to the data only for purposes of performing these tasks on our behalf and under obligations similar to those described in this Privacy Statement, who perform functions such as data processing, auditing, order fulfillment, managing and enhancing customer data, providing customer service, conducting customer research or satisfaction surveys, marketing support, payment processing and invoice collection support, informational systems technical support, to help us provide, analyze, and improve our Services and to assist us in detecting and dealing with data breaches, illegal activities, and fraud. We may also share your personal data with governments and/or government-affiliated institutions, courts, or law enforcement agencies, to comply with our obligations under relevant laws and regulations, enforce or defend our policies or contract with you, respond to claims, or in response to a verified request relating to a government or criminal investigation; provided that, if any law enforcement agency requests your data, we will attempt to redirect the law enforcement agency to request that data directly from you, and in such event, we may provide your basic contact information to the law enforcement agency. We may also provide your data to third parties involved in a legal proceeding if they provide us with a court order or substantially similar legal procedure requiring us to do so. The above parties are the recipients of your personal data.</p><p>Synology takes measures to ensure that your personal data is processed as required by this Privacy Statement and applicable laws, including to ensure your personal data is transferred to a residential location that has an adequate level of data protection approved by the European Commission. In circumstances where an adequate level of data protection is not available for the residential location of the data recipient, Synology requires that such recipient adopts European Commission-approved Standard Contractual Clauses with Synology as a legal mechanism for data transfer, to ensure that such data is safeguarded and processed by the recipient strictly within the restrictions and conditions set forth in such Standard Contractual Clauses.</p><h2>Your Rights to your Personal Data</h2><p>Synology's services are generally provided on an opt-in basis, with required and collected information differing on a per-service basis. Unless subject to an exemption, you will have the following rights with respect to your personal data:</p><ul><li>The right of access: You may request a copy or specific pieces of your personal data that we have collected at the time.</li><li>The right to request information about the categories of your personal data which we have collected and the categories of sources from whom we have collected such data.</li><li>The right to be informed about the business or commercial purpose for our collection of your personal data.</li><li>The right to request information about the categories of your personal data which we have disclosed to third parties and the categories of third parties to whom we have disclosed your personal data.</li><li>The right of portability: You may request us to transmit your personal data directly to another data controller, where the processing is based on your consent or is necessary for the performance of a contract with you, and in either case, we process the data by automated means. The right to delete data: You can request us and our third-party processors to delete data, subject to applicable laws: You can ask us or our third-party processors to delete data for which we no longer need in order to provide service to you.</li><li>The right to correct or change data: You can modify your contact information through your Synology Account. You can also ask us to change, update, or fix data that are incorrectly presented and unable to be changed by yourself.</li><li>The right to object: You can object to the usage of some or all of your personal data which is based on legitimate interests pursued by Synology.</li><li>The right to restrict the use of data: You can ask us to stop or limit the usage of some or all of your personal data that we no longer need, in order to provide service to you, or have legal rights to retain.</li><li>The right not to be discriminated against by us for exercise any of your above rights.</li></ul><p>You may make these requests by submitting a request through your <a target="_blank" href="https://account.synology.com/support">Synology Account</a> or our <a target="_blank" href="https://www.synology.com/company/contact_us">website</a>. Upon receipt, we will evaluate your request and inform you how we intend to proceed. Under certain circumstances, and according to applicable European Union or European Union state laws and regulations, we may withhold access to your data, or decline to modify, erase, port, or restrict the processing of your data. Synology will respond to your request within thirty days after receiving it. Please be advised that if you exercise the rights to erase data, restrict, or object to our processing, or to withdraw your consent, we may not be able to continue our Services to you if the necessary data is missing for processing.</p><p>If you are a resident in the Designated Areas, you have the right to file a complaint with the <a target="_blank" href="https://www.bfdi.bund.de/EN/Service/Kontakt/contact_node.html">German Federal Commissioner for Data Protection and Freedom of Information</a> (BfDI) or with the competent authority where you reside or in which your data is processed. In case of disagreements relating to Synology’s processing of your personal data, you can submit a request for administrative action to the data protection supervisory authority with the competent authority where you reside or in which your data is processed. Please click <a target="_blank" href="http://ec.europa.eu/newsroom/article29/item-detail.cfm?item_id=612080">here</a> for a list of local data protection authorities in the EEA.</p><h2>Security</h2><p>Synology employs multiple methods of data protection in order to minimize the risk of misuse, unauthorized access and disclosure, and loss of access. Some of these safeguards include the use of pseudonymization, data encryption, data hashing, and other technologies and permission control methods. When our employees directly handle or access your personal information, we do so on secured networks and through fine-grained permission control to limit who can access your information. Data you provide to us is encrypted and stored on both third-party storage and on Synology-managed devices, depending on the service.</p><p>Synology logs and stores IP addresses of both users to our web services solely for security purposes. This log is archived and then removed at irregular intervals depending on ongoing or existing security threats or investigations. If Synology has overwhelming evidence that certain IP addresses, users, or devices may be purposely damaging or hindering our operations or service quality, we may deny further services and/or report such behavior to relevant authorities.</p><p>Synology removes data that is no longer required to provide services based on each service.</p><h2>Changes to Statement</h2><p>Synology may make amendments to this document when needed to reflect statement updates, customer feedback, as well as new products or services. If the terms modify the way we process or handle your data or affect your rights, we will notify you through direct message or by posting notices if we are unable to directly reach you. We encourage that you regularly review this Privacy Statement to understand how your data is handled.</p><h2>Data from Children</h2><p>Synology's products and services are targeted at professionals and are not designed nor intended to be used by children under 16 years of age. Synology does not typically collect date of birth information as it is not used by Synology. If children under the minimum age of the relevant jurisdiction must use Synology's products and services, explicit parental consent must be provided and verified. If Synology is notified or discovers that data collected is from a child under the minimum age, we will take procedures to delete the information as soon as possible.</p><h2>Notice to End Users</h2><p>Certain Synology products or services may be managed or administered to you by organizations or other users. Your use of these managed Synology products or services will be affected by the terms or policies that are provided and dictated by the organization or service provider. Please direct inquiries in these instances to the administrator of the device or service. Synology will not be responsible for the privacy or security practices, including the lawfulness of practices for our customers as they may manage or implement our products and services in a manner that is no longer determined by Synology's policies or agreements.</p><h2>Contact Information</h2><p>You can directly contact us through your <a target="_blank" href="https://account.synology.com/support">Synology Account</a>, or by submitting a form available on our <a target="_blank" href="https://www.synology.com/company/contact_us">website</a> for privacy-related questions or concerns.</p><p>If you are a California resident, you may also contact Synology to this toll-free at 1-866-467-8688 (Service Code 951#). If you are unable to resolve the issue, you have options to exercise your rights as detailed in the previous "Your Rights to your Personal Data" section. Synology will respond to your requests within thirty days after receiving it.</p><p>You may also contact Synology through the following addresses.</p><h5>For users residing in the Designated Areas:</h5><p><code>Synology GmbHAttn: Data ProtectionGrafenberger Allee 295  40237 Düsseldorf  DEUTSCHLAND</code>Tel: +49 211 9666 9666</p><h5>For users residing outside the Designated Areas:</h5><p><code>Synology Inc.Attn: Data Protection9F, No. 1, Yuan Dong Rd.,  Banqiao, New Taipei 220632  TAIWAN</code>Tel: +886 2 2955 1814</p>"
package_privacy_subtitle	=	"Synology collects diagnostics and statistical data to improve our products and services."
package_privacy_title	=	"Synology Package Center Privacy Statement"
package_tos_checkbox	=	"I have read and agreed to the Package Center Terms of Service"
package_tos_content	=	"<h3>Synology Package Center Terms of Services</h3><p>Before you use Synology Package Center, you must accept to be bound by this contract which contains terms of the relationship between you and Synology for your use of Synology Package Center service and the packages you download from the service.</p><p>By clicking “I accept” or by use of Synology Package Center Service, you agree to be bound by the terms and conditions contained in this contract (unless alternative package license terms are provided with the package).</p><p>Please review the following terms and conditions carefully and be advised that we do not provide any warranties for the <strong>Synology Package Center</strong> service. <strong>This contract also limits our liability for your use of Synology Package service.</strong></p><h5>Terms and Conditions</h5><ol><li><p>Synology Package Center and Package.</p><p>1.1. Synology Package Center service is provided by Synology, through which you can browse, search, download and purchase packages.</p><p>1.2. Packages available through Synology Package Center service are only licensed, not sold, to you, when you download any of them by clicking “Install”.  For each package, Synology Package Center service will indicate the name of the package developer licensing the package to you, if available, which may be Synology (“Synology Packages”) or a third party package developer (“Third Party Packages”).</p><p>1.3. License while Installation. You may install and use one copy of the Package to each one Synology's Device you personally own or control.  You may not install or use a copy of the Package on a device you do not own or control.</p><p>1.4. When you install any of Third Party Package, Synology is not the party to the license relationship between you and the package developer of the Third Party Package. Your use of the Third Party Package will be governed by and subject to the terms and conditions specified in the Third Party Package or an End User License Agreement, if any, attached thereto. Furthermore, Synology is not responsible or liable for (i) the Third Party Package and its content; (ii) your use of the Third Party Package; or (iii) any warranties or claims relating to the Third Party Package.</p><p>1.5. This Contract Only Licenses You Some Rights to Use the Synology Package.  We reserve all other rights to the Synology Package and its software. Unless applicable law gives you more rights despite this limitation, you may use the Synology Package only as expressly permitted in this contract. In doing so, you must comply with any technical limitations in the Package that only allow you to use it in certain ways. You may not:</p><ul><li>Combine the Synology Package into a commercial product, unless otherwise consent from Synology. Work around any technical limitations in the Synology Package;</li><li>Transfer the Synology Package or this contract to any third party;</li><li>Rent, lease or lend the Synology Package;</li><li>Reverse engineer, decompile or disassemble the Synology Package, except and only to the extent that applicable law expressly permits, despite this limitation;</li><li>Make more copies of the Synology Package than specified in this contract or allowed by applicable law, despite this limitation; or    publish the Synology Package for others to copy;</li></ul><p>1.6. When you install or use of any of Third Party Package, you have to keep it in mind that its developer may change its terms and conditions governing the Third Party Package, or modify, suspend, cancel or stop its services thereof at any time; and that Synology is also entitled to change, cancel or stop the Third Party Package and its services, at any time and for any reason. No warranty or commitment is provided therefor by Synology.<br><br></p></li><li><p><strong>You must be at least 13 years old to use Synology Package Center</strong>. If you are at least 13 but under the age of majority in your country, you should review this contract with your parent or guardian to make sure that you and your parent or guardian understand this contract.</p></li><li><p>You Are Responsible For Your Synology Device. You are responsible for your Synology Device and any activity that takes place with your Synology device.</p></li><li><p>Compliance with Law. When you use of Synology Package Service, you will obey (i) the law; (ii) any codes of conduct or other notices we provide; and (iii) promptly notify us if you learn of a security breach related to Synology Package.</p></li><li><p>When you use of Synology Package Center service, you may not (i)engage in, facilitate or further unlawful conduct; (ii) damage, disable, overburden or impair Synology Package Center or over which Synology Package Center runs or interfere with anyone's use and enjoyment of Synology Package Center; and (iii) use Synology Package Center in a way that harms Synology, Synology's affiliates, package developers, or any customer of Synology;</p></li><li><p>Content of Synology Package Center.</p><p>6.1. There are two types of content relating to Synology Package Center, i.e. packages provided by Synology (“Synology Package”) and packages provided by third party (“Non-Synology Package”, “Third Party Package”)</p><p>6.2. Except for Synology Package, you understand that (i) Synology does not control or endorse Non-Synology Package; (ii) Synology does not claim ownership of nor take responsibility for Non-Synology Package; and (iii) Synology does not responsible for any Non-Synology Package, its content, ownership, and etc. and (iv) you will contact the third party directly for any questions or problems you have in downloading or using Non-Synology Package as it directs with the Package.</p><p>6.3. Please be advised that any content in Synology or Non-Synology Package such as music, photos and video may be protected by copyright and that People appearing in content may have a right to control use of their image.  You may not share the content in Synology Package or Non-Synology Package with other people unless you own the rights or have permission from the owner. You understand that sharing content with other people violating others' copyrights and other intellectual property rights violates this contract.<br><br></p></li><li><p>Purchases of Package and Refunds.</p><p>7.1. Charges. Section 7 applies to any purchases made from Synology Package Center, including of Synology Package and Non Synology Package.  Please be advised that for any of your purchase of Third Party Package, Synology will be appointed to be an agent by the package developer thereof in connection with payment collection, issuance of invoice and any refund for the transaction.   You acknowledge that, even if you do not make any purchase, you may still incur other charges (not covered by this Section 7), incidental to your downloading or using the package, if the package so specifies.</p><p>7.2. Payment. When you purchase a package for which a fee is payable, you select or confirm your payment method. You must be authorized to use the payment method you select or confirm.   You are responsible for the timely payment of all fees and for providing Synology with valid payment method information for payment of all fees.  You authorize us to charge you for package purchases using your payment method.  You acknowledge that your payment method may require us to send your charges to a third party, such as a payment processor.</p><p>7.3. Prices and Taxes. The price for package excludes all taxes and other charges as stated with the purchased package (such as VAT, sale tax and etc.), unless stated otherwise.  You are responsible for any taxes that you are obligated to pay or that we may collect from you and all other charges to be incurred.</p><ul><li>The Prices for packages may change at any time, and Synology does not provide price protection or refunds in the event of a price reduction or promotional offering.</li><li>Please be advised that any currency exchange settlements are based on your contract with your payment method provider.</li></ul><p>7.4. Refund policies. Unless otherwise provided by law or in this Section 7.4, You may cancel your purchase of the Package within 7 working days after your purchase, and get a refund of the purchase price upon deleting all copies of the acquired Package.  Synology reserves the right to approve or deny any cancellation made after 7 working days at its sole discretion. If the applicable law allows you to cancel the transaction within a specified period, Synology will make a refund to you, provided that only the cancellation is made within the period required by the applicable law, and that you have deleted all copies of the acquired Package.  Upon cancellation, you may no longer be licensed to access or use the Package that you acquired through that transaction. You shall comply with the Synology’s request to confirm that you have deleted all copies of the acquired Package.</p><p>7.5.  Sole Remedy.   If a package becomes unavailable following a transaction but prior to download, your sole remedy is a refund.  If technical problems prevent or unreasonably delay delivery of your package, your exclusive and sole remedy is either replacement or refund of the price paid, as determined by Synology.</p><p>7.6.  Stop Your Use of Synology Package Service. In order to protect Synology Package Center, its customers and Package Developers, Synology may a) remove any package from Synology Package Center and for any reason; and b) stop your access to Synology Package Center service for any reason, without any advance notice to you.<br><br></p></li><li><p>Privacy Policy.</p><p>8.1. For the purpose of operating and providing Synology Package Center, we may access or disclose your contact information, in order to: (a) comply with the law or respond to lawful requests or legal process; (b) protect the rights or property of Synology or our customers and package developers, including the enforcement of our contracts or policies governing your use of Synology Package Center; (c) act on a good faith belief that such access or disclosure is necessary to protect the personal safety of Synology employees, customers, package developers, or the public or (d) to contact you regarding issues with the packages you have downloaded.</p><p>8.2. Please let advised that Synology retains the right to block or otherwise prevent delivery of any type of communication to or from Synology Package Center as part of our efforts to protect Synology Package Center, protect our customers, package developers and the relevant right owner or stop you from breaching this contract, and that the technology or other means we use may hinder, break or stop your use of Synology Package Center.<br><br></p></li><li><p>Change to Contract.  Synology retains the right to change this contract at any time.  If we change this contract, we will post a notice on the Synology Package Center or otherwise notify you that the contract has been changed. If you do not agree to these changes, then you must cancel and stop using Synology Package Center. If you do not stop using Synology Package Center, then your continued use will constitute your acceptance of the changed contract, and the changed contract will apply to your use of Synology Package Center after the date of the change.</p></li><li><p>Change or Cancel Synology Package Center. We may change Synology Package Center, delete features, cancel or suspend access to Synology Package Center Service at any time and for any reason.  Our cancellation or suspension may be without cause and/or without notice.  Upon cancellation, your right to use Synology Package Center stops right away.  Once Synology Package Center is cancelled or suspended, any data you have stored on Synology Package Center may not be retrieved later, which includes backup copies of packages you may have downloaded.  Our cancellation of Synology Package Center will not alter your obligation to pay all incurred charges.</p></li><li><p><strong>NO WARRANTY. We provide Synology Package Center and either of the packages therein “as-is,” “with all faults” and “as available.”  We do not guarantee the accuracy or timeliness of information available in Synology Package Center or any package therein.  We and our affiliates and package developers give no express or implied warranties, guarantees or conditions.  You may have additional consumer rights under your local laws that this contract cannot change.  We exclude any implied warranties including those of merchantability, fitness for a particular purpose, workmanlike effort and non-infringement.</strong></p></li><li><p><strong>LIABILITY LIMITATION.   Synology and its affiliates and package developers (unless alternative package license terms are provided with the package) shall not be liable under this contract for any direct damages in excess of the amount you paid for Synology Package Center or the package, as applicable. You cannot recover any other damages, including consequential, lost profits, data loss, special, indirect, incidental or punitive damages.</strong></p></li><li><p>Scope of application limitation.  The limitation specified in Section 11 applies to anything related to (i) Synology Package Center service, (ii) Synology Package, Third-Party Package or any third-party conduct,(iii) viruses or other disabling features that affect your access to or use of Synology Package Center, (iv) incompatibility between downloaded packages and other services, software and hardware, (v) delays or failures you may have in initiating, conducting or completing any transmissions, downloads or transactions in connection with Synology Package Center or a package in an accurate or timely manner, and (vi) claims for breach of contract, breach of warranty, guarantee or condition, strict liability, negligence or other tort.  Please be advised that the limitation also applies even if (i) this remedy does not fully compensate you for any losses, or fails of its essential purpose; or (ii) Synology knew or should have known about the possibility of the damages.</p></li><li><p>Contract Interpretation.  All parts of this contract apply to the maximum extent permitted by law.  If a court decides that any part of this contract cannot be enforced, the part will be replaced by the terms that most closely match the intent of that we cannot enforce, but the rest of this contract will not change.  This is the entire contract between you and us regarding your use of Synology Package Center.  It supersedes any prior contract or statements regarding your use of Synology Package Center.</p></li><li><p>One Year Limitation for Your Claim. Any claim related to this contract or Synology Package Center shall be brought within one year.  The one-year period begins on the date when the claim first could be filed.  The claim will be permanently barred, if it is not filed in time.  This applies to you and your successors.  It also applies to us and our successors and assigns.</p></li><li><p>Governing Law. Please be advised that the laws of Taiwan will govern the interpretation of this contract, any terms thereof, package purchase and any claims arisen therefrom, unless otherwise specified in the package relating to the claim, without regard to the conflicts of law's provisions thereof, and shall be brought in a court in Taiwan.  You agree to submit to the personal jurisdiction of any of those courts.</p></li><li><p>Assignment.  You may not assign this contract, or any part of it, to any other person.  You may not transfer to anyone else, either temporarily or permanently, any rights to use Synology Package Center or any part of Synology Package Center.</p></li><li><p>Notices.</p><p>18.1. Your Notices to Us.  You may notify us in the form required in <a target="_blank" href="https://www.synology.com/company/contact_us">https://www.synology.com/company/contact_us</a>. We do not accept e-mail notices.</p><p>18.2. Notices We Send You; Consent Regarding Electronic Information.  This contract is in electronic form. We will send you certain information regarding Synology Package Center that the law requires us to send you.  We may send you this information in electronic form by (i) by e-mail at the e-mail address you specified when you signed up for your use of Synology Package Center, if so required; (ii) by access to a Synology web site that will be designated in an e-mail notice sent to you at the time the information is available; (iii) by access to a Synology web site that will be generally designated in advance for this purpose; or (iv)by a prompt notification message upon launching Synology Package Center.</p><p>Notices provided to you via email or pop-up notification messages will be deemed given and received on the date when the notification was sent out. As long as you can access and use Synology Package Center, you have the necessary software and hardware to receive these notices or message while your use of Synology Package Center.  If you do not consent to receive any notices electronically, you must stop using Synology Package Center.</p><p>18.3. Copyright and Trademark Notices.  All contents of Synology Package Center are Copyright © Synology Inc. and other copyright owners.  Copyright and other intellectual property laws and treaties protect any software or content provided as part of Synology Package Center.  The names of actual companies and products mentioned in Synology Package Center may be the trademarks of their respective owners.  Any rights not expressly granted herein are reserved.<br><br></p></li><li><p>Support.</p><p>Customer support for Synology Package Center is available at <a target="_blank" href="https://www.synology.com">https://www.synology.com</a>.</p></li></ol>"
package_tos_subtitle	=	"Your Synology device is easily customizable with additional functionality. Before we begin, you will need to read and agree to the Package Center Terms of Service."
package_tos_title	=	"Synology Package Center Terms of Service"
passwd_hint_rule	=	"Password strength requirement:"
passwd_included_special_char	=	"special characters"
passwd_medium	=	"Medium"
passwd_mixed_case	=	"mixed case"
passwd_strength	=	"Password strength"
passwd_strong	=	"Strong"
passwd_weak	=	"Weak"
please_acknowledge_agreement	=	"Please agree to the Terms of Service and acknowledge the Privacy Statement"
promotion_2fa_btn_enable	=	"Enable Now"
promotion_2fa_btn_remind	=	"Remind me later"
promotion_2fa_btn_skip	=	"No, thanks"
promotion_2fa_desc	=	"2FA adds an extra layer of security to your account by requiring a second identity verification step when you sign in to your account.<br>The options for the second step include using a hardware security key or a mobile device for Approve sign-in or OTP (one-time verification code)."
promotion_2fa_title	=	"Enable 2-Factor Authentication (2FA)"
promotion_active_insight_config_desc	=	"A cloud service that expedites technical support processes, monitors the health of all your Synology NAS, and provides you with troubleshooting steps upon abnormalities. After enabling this service, sign in to the {0}web portal{1} to check out the details."
promotion_active_insight_config_monitor_desc	=	"Advanced feature to monitor the health status of all your Synology NAS 24/7. You can get notified of system abnormalities and potential issues, as well as detailed steps for troubleshooting. After enabling this service, sign in to the {0}web portal{1} to check out the details."
promotion_active_insight_desc	=	"Centrally monitor the health of your Synology NAS devices and expedite technical support services"
promotion_active_insight_enable	=	"Enable Active Insight"
promotion_active_insight_monitor_enable	=	"Enable 24/7 monitoring service (Beta)"
promotion_active_insight_note	=	"Enabling Active Insight will automatically change the {0}Time Setting{1} from {2}Manually{3} to {4}Synchronize with NTP server{5}."
promotion_active_insight_only_desc	=	"A cloud service that offers advanced technical support experience for faster troubleshooting and 24/7 comprehensive health monitoring with an automated warning system through a web portal."
promotion_active_insight_only_dialog_desc	=	"To enable full functionality of health monitoring, go to the Active Insight portal > Subscription page to manage your subscriptions and assign a license to this _DISKSTATION_."
promotion_active_insight_only_dialog_title	=	"Open Active Insight portal"
promotion_active_insight_only_enable	=	"Enable Now"
promotion_active_insight_only_privacy_statement	=	"Before enabling Active Insight, please read our <a class="link-font" href="https://www.synology.com/company/legal/privacy" target="_blank">Privacy Statement</a> and <a class="link-font" href="https://www.synology.com/company/legal/Services_Data_Collection_Disclosure#active-insight" target="_blank">Services Data Collection Disclosure</a>."
promotion_active_insight_only_setup_later	=	"Enable later in the package"
promotion_active_insight_only_subtitle	=	"With a Synology Account, this cloud service offers:"
promotion_active_insight_only_title	=	"Explore New Active Insight Service"
promotion_active_insight_title	=	"Active Insight"
promotion_conf_backup_config_desc	=	"A feature that regularly backs up your DSM system configurations to Synology Account, which allows you to quickly set up or restore settings to new or existing devices in the future."
promotion_conf_backup_desc	=	"Automatically back up your system settings to the cloud"
promotion_conf_backup_enable	=	"Enable Configuration Backup"
promotion_conf_backup_title	=	"Configuration Backup"
promotion_create_syno_account	=	"Create Synology Account"
promotion_dialog_reconsider_content	=	"You're about to miss out on many awesome features that will help manage your device simply and effortlessly. Would you like to reconsider and sign in to Synology Account now?<br>Note: If you skip for the time being, you can sign in later in Control Panel."
promotion_dialog_reconsider_content_main_1	=	"You're about to miss out on many awesome features that will help protect your device. Would you like to reconsider and sign in to Synology Account now?"
promotion_dialog_reconsider_content_main_2	=	"You're about to miss out on many awesome features that will help protect your device. Would you like to reconsider and configure them now?"
promotion_dialog_reconsider_content_note	=	"{0}Note{1}: If you skip for the time being, you can configure them later in Control Panel."
promotion_ew_btn_register	=	"Register Now"
promotion_ew_btn_remind	=	"Skip for now"
promotion_ew_btn_skip	=	"Dismiss"
promotion_ew_desc	=	"Register for {0}Extended Warranty Plus{1} now for the benefits:<ul><li>Extend your product warranty for an extra 2 years on top of the original factory warranty.</li><li>Receive expedited and even advanced replacement services during your Extended Warranty Plus coverage.</li></ul>"
promotion_ew_desc_note	=	"{0}Note: {1}Registration is available within a limited time period after your _DISKSTATION_ purchase. Internet access is required for the registration."
promotion_ew_feature_opt_adv_rma	=	"Optional advanced replacement"
promotion_ew_feature_pickup	=	"Free shipping"
promotion_ew_feature_rma	=	"Expedited services"
promotion_ew_feature_warranty	=	"Extra 2-year warranty"
promotion_ew_reconsider_btn_skip	=	"Dismiss"
promotion_ew_reconsider_content_main	=	"You can register for Extended Warranty Plus only within a limited time period after your _DISKSTATION_ purchase.<br>You can still go to {0}Control Panel > Synology Account{1} to register later."
promotion_ew_reconsider_content_note	=	"{0}Note{1}: If you skip for the time being, you can configure them later in {2}Control Panel > Synology Account{3}"
promotion_ew_reconsider_title	=	"Are you sure you want to dismiss?"
promotion_ew_title	=	"Extended Warranty Plus"
promotion_fast_support_desc	=	"Facilitates the troubleshooting process with auto-delivered diagnostic data upon submission of a technical support ticket."
promotion_gpu_preinstall_desc_2_home_disable	=	"The system will install these packages and their dependencies, and automatically enable user home service and AI-powered search."
promotion_gpu_preinstall_desc_2_home_enable	=	"The system will automatically install these packages and their dependencies, then enable AI-powered search."
promotion_gpu_preinstall_desc_2_no_volume	=	"After you create a volume, the system will install these packages and their dependencies, and automatically enable user home service and AI-powered search."
promotion_gpu_preinstall_whitetip	=	"The system will install or upgrade the following dependent packages:"
promotion_notification_setting_failed	=	"Unable to activate {0}. Please go to {1}Control Panel{2} to set up."
promotion_notification_setting_failed_both	=	"Unable to activate the following services: {0}. Please go to {1}Control Panel{2} and {3}Package Center{4} to set up."
promotion_notification_setting_failed_pkg_center	=	"Unable to activate {0}. Please go to {1}Package Center{2} to set up."
promotion_preinstall_ai_console	=	"Synology AI Console"
promotion_preinstall_btn_enablenow	=	"Enable Now"
promotion_preinstall_btn_installnow	=	"Install Now"
promotion_preinstall_btn_remind	=	"Remind me later"
promotion_preinstall_btn_skip	=	"No, thanks"
promotion_preinstall_desc_1	=	"Effortlessly collaborate with others, securely access, share, and backup/sync your files from anywhere."
promotion_preinstall_desc_2_home_disable	=	"The system will install these packages and their dependencies. User home service will also be enabled automatically."
promotion_preinstall_desc_2_home_enable	=	"The system will automatically install these packages and their dependencies."
promotion_preinstall_desc_2_no_volume	=	"After you create a volume, the system will install these packages and their dependencies. User home service will also be enabled automatically."
promotion_preinstall_drive	=	"Synology Drive Server"
promotion_preinstall_eula	=	"By clicking <b>{0}</b>, you agree to our <a href="https://www.synology.com/company/legal/terms_EULA" target="_blank">End User License Agreement</a>."
promotion_preinstall_gpu_semantic_search_desc	=	"Go to Synology AI Console to unlock AI-powered search in Synology Drive. With this feature, you can quickly find documents, photos, scanned files, and audio using keywords or natural language queries."
promotion_preinstall_gpu_semantic_search_title	=	"Enable AI Search"
promotion_preinstall_gpu_sub_title	=	"The system has detected a compatible GPU that supports AI-powered search with Synology Drive."
promotion_preinstall_gpu_title	=	"Enable AI Search"
promotion_preinstall_no_volume	=	"These packages will be automatically installed after you create the first volume."
promotion_preinstall_office	=	"Synology Office"
promotion_preinstall_photos	=	"Synology Photos"
promotion_preinstall_title	=	"Securely Access and Share Files From Anywhere"
promotion_secure_signin_config_desc	=	"A feature to further strengthen the protection of your account by setting up 2-factor authentication using Synology native mobile app or a hardware security key. Go to Personal settings at the upper-right corner of DSM desktop to get started."
promotion_secure_signin_desc	=	"Sign in to DSM with your mobile device or a hardware security key"
promotion_secure_signin_enable	=	"Enable Secure SignIn Service"
promotion_secure_signin_title	=	"Secure SignIn Service"
promotion_setup_now	=	"Set Up Now"
promotion_skip	=	"Skip for now"
promotion_subtitle	=	"Effortlessly boost the security of your _DISKSTATION_."
promotion_subtitle_next	=	"Learn more about these useful tools on the next page."
promotion_subtitle_signin	=	"Sign in to Synology Account now to take advantage of these useful tools."
promotion_title	=	"Explore New Services Available with Synology Account"
promotion_useful_tools_title	=	"Select the services you wish to enable"
promotion_welcome_feature1	=	"Streamlined & More Intuitive"
promotion_welcome_feature2	=	"Easier Management & Maintenance"
promotion_welcome_feature3	=	"Faster & More Secure"
promotion_welcome_subtitle_admin	=	"More versatile than ever before, see how DSM makes data management simpler and more secure. {0}Learn more{1}"
promotion_welcome_subtitle_normal	=	"Next-generation data management begins here"
promotion_welcome_title_admin	=	"What's New in DSM 7.0"
promotion_welcome_title_normal	=	"Welcome to DSM 7.0"
quick_copied	=	"QuickConnect ID copied"
quickcnt_info_desc1	=	"With Synology QuickConnect provided by Synology Account, you can access and enjoy your files anywhere you go -- right away."
quickcnt_info_desc2	=	"Synology Account -- Synology's exclusive cloud service -- gives you easy service access, DDNS service, real-time status monitoring, software updates, and more."
quickcnt_info_title1	=	"Access _DISKSTATION_ Anytime, Anywhere"
quickcnt_info_title2	=	"Synology Cloud At Your Service"
quickconnect_created_desc	=	"You can now access your _DISKSTATION_ via the Internet using your exclusive QuickConnect ID. Click the icons next to the following URLs to copy to clipboard or save as bookmark for future access."
quickconnect_created_title	=	"Your QuickConnect ID is ready"
quickconnect_setup	=	"Create your QuickConnect ID"
quickconnect_setup_desc	=	"Set up QuickConnect ID to access your _DISKSTATION_ via the Internet."
quickconnect_setup_desc1	=	"QuickConnect is a free service that lets you access your _DISKSTATION_ via a secure custom address and access media or files from any device with an internet connection."
quickconnect_setup_desc2	=	"Synology will collect information such as device serial number and IP address in order to provide QuickConnect service. To secure the connection with HTTPS, your QuickConnect domain will be passed to Let's Encrypt, a third-party certificate authority, to generate an SSL certificate. Please refer to our {0}Terms of Services{1} and {2}Privacy Statement{3} for details."
region	=	"Region"
secure_signin	=	"Secure SignIn Service"
secure_signin_desc	=	"This service supports logins using mobile devices or hardware security keys."
see_what_new	=	"{0}See what's new{1}"
select_update_subtitle	=	"Select what to do when there are DSM and package updates available"
select_update_title	=	"Select an update option for your _DISKSTATION_"
skip_upgrade_warning	=	"You can update _OSNAME_ later in <b>Control Panel</b> > <b>Update & Restore</b> > <b>_OSNAME_ Update</b>."
skip_warning	=	"If you skip this step, you'll need to set up port forwarding to remotely access your _DISKSTATION_ over the Internet."
smartupdate_description	=	"<p>This brand-new update mechanism provides DSM updates, including new features, security fixes, and improved system stability, tailored to you based on your Synology NAS usage behavior.</p><p>For more information, visit this <a href="https://www.synology.com/knowledgebase/DSM/help/DSM/AdminCenter/system_dsmupdate" target="_blank">help page</a>.</p>"
smartupdate_title	=	"Smart Update"
smartupdate_update_button	=	"Got It"
spin_verifying	=	"Verifying..."
starting_pkgs	=	"Launching built-in packages..."
subscribe_enews	=	"Subscribe to Synology news and announcements"
syno_create_link	=	"Create a {0}Synology Account{1} on Synology website"
syno_login_link	=	"Already have an account? {0}Sign in{1} now."
synoaccount_privacy_checkbox	=	"I acknowledged the Synology Account Privacy Statement."
synoaccount_privacy_content	=	"<h1>PRIVACY STATEMENT</h1><h2>Introduction</h2><p>Synology holds itself to high standards in handling and processing personal information. The statement outlined below establishes the boundaries of what Synology processes and what you, as our customer and the data subject ("<strong>users</strong>"), are entitled to. This Privacy Statement applies when you use our features and services ("<strong>Services</strong>"). Additionally, we have a Cookie Policy for use of our website.</p><p>Synology operates around the world and has adopted English as the controlling language of this Privacy Statement. Additional translations are provided for convenience. You may switch to other languages by using the language selection button at the bottom of the webpage.</p><p>This Privacy Statement applies to Synology-provided services offered on Synology-owned websites, Synology-branded applications, services provided from physical Synology products ("<strong>Synology Devices</strong>"), and digital or physical services directly offered by Synology. For specific programs, products, or Services offered by Synology, individual Service-specific privacy policies may supersede and prevail over this Privacy Statement or supplement this Privacy Statement in relevant parts.</p><h2>Your Personal Data</h2><p>Personal data refers to identifying information that relates to, describe, is capable of being associated with, or can reasonably be linked directly or indirectly to, an individual or a household. Identification can be by the data alone or in conjunction with any other data in the data controller's possession or likely to come into such possession. Synology collects information only to provide you with the Services and to improve user experiences. To provide you with Synology Devices or Services, including responding to your inquiries, we may ask for your personal information. If you choose not to provide the requested information, we may be unable to deliver the desired Services. Most of Synology's Services are provided under a Synology Account, and if you no longer require the Service or wish to have your data removed, you may delete your Synology Account.</p><p>In general, Synology collects personal data from you through your use of our Services. Synology also uses cookies and other technologies to gather information regarding a visitor's browsing preferences. The data we collect and store from you, including in the preceding 12 months, may consist of the following data categories:</p><ul><li>Contact Information: Your e-mail address (used as identification for our services and as the primary communication method), name, address, phone number, and additional contact detail that are used to provide registration, device shipping, and billing verification services.</li><li>Commercial information: Your payment method and financial data (credit card, bank account number, etc.), which is used for payment transactions for a service or product, logistics, and billing data (such as customs ID and tracking number).</li><li>Technical Information: Your IP address, device's location (latitude and longitude), unique device identifiers, referral URL, computer and connection data (such as the type of operating system you use, device and software information, browser type, browser language and version, ad data, access times, Internet or other network activity such as weblog information) used for fraud prevention, security purposes, warranty registration, customer support services, providing desired functionality, and for transactions.</li><li>Account Information: Your account name, Internet, or other network activity information such as account login, account activity, transaction data, and any information you provide during a transaction, or other transaction-based content that you generate or connected to your account as a result of your transaction.</li><li>Communication History: Your chat and service history with us, and any other information you may provide us when you interact with us.</li></ul><p>Other information that you provide to us through digital or physical means may be stored on a case-by-case basis depending on the reason it was provided.</p><p>Synology does not access (or use) files uploaded by users to their devices.</p><p>Learn more from our <strong><a target="_blank" href="https://www.synology.com/company/legal/Services_Data_Collection_Disclosure">Services Data Collection Disclosure</a></strong> for specific Services and <strong><a target="_blank" href="https://www.synology.com/company/legal/cookie_policy">Cookie Policy</a></strong> for specific information on the data processed and ways they are stored for each Service.</p><h2>Lawful Bases and Other Usage</h2><p>The lawful bases for Synology to process your personal data for the various types of processing performed on your personal data are, as applicable, processing based on your consent, as necessary for us to enter into and to perform our contract with you, or in certain circumstances, as necessary for Synology to pursue our "legitimate interests", where our interests are not outweighed by your rights and freedoms.</p><p>"Legitimate interest" situations necessitating such actions may include the following: to protect you, us, or others from security threats, to comply with laws we are subjected to, to implement information sharing within Synology's group affiliates, to prevent fraud, misuse of company IT systems, to operate a whistleblowing scheme, for purposes of mergers and acquisitions, and to perform internal investigations and auditing.</p><p>Synology will collect, process, and use the personal data supplied by you only for the purposes communicated to you and will not disclose your data to third parties except under the lawful bases set forth above. Synology does not share your personal information with third parties for the purpose of direct marketing. Synology also does not engage in the selling of personal data to any third party.</p><p>The purposes for which Synology collects and processes personal data may include, but not limited to:</p><ul><li>Operating our websites to provide you access to and use of our websites and Services;</li><li>Administering your use of our Services, to communicate with you and respond to your requests;</li><li>Managing your Synology Account;</li><li>Customizing your Service experience with us, to improve our Services and products;</li><li>Providing you with our online or offline marketing measures and activities; including but not limited to newsletters, online and live event registrations, and other promotional information and materials; </li><li>Sharing your contact details with our subsidiaries, affiliates, authorized repair and support centers, authorized logistics companies, communications infrastructure, and other entities deemed necessary to carry out providing these Services to you;</li><li>Sharing your contact details with our affiliate offices around the world within our group of companies for the purposes of internal administration and back-office support;</li><li>Ensuring our network security, and to prevent fraud;</li><li>Enforcing or defending our policies or contract with you; and </li><li>Maintaining the integrity and safety of our data technology systems that store and process your personal data. </li></ul><p>You are not under any obligation to provide us any of your personal data. However, please note that without certain data from you, we may not able to undertake some or all of our obligations to you under our contract with you, or adequately provide you with our full range of services. If you would like to obtain more detail about this, please contact us following the instructions in the "Contact Information" section below.</p><h2>Period of Storage</h2><p>Synology keeps your personal data for no longer than reasonably necessary for the given purpose for which your data is processed. If you will provide us, or have provided us, consent for us to process your data, we will process your data for no longer than your consent is effective. Notwithstanding the above, we may retain your personal data as required by applicable laws and regulations, as necessary to assist with any government and judicial investigations, to initiate or defend legal claims or for the purpose of civil, criminal, or administrative proceedings. If none of the above grounds for us to keep your data apply, we will delete and dispose of your data in a secure manner.</p><h2>Data Controllers, Contracting Parties, Transfer of Data</h2><p>We use the term "<strong>Designated Areas</strong>" to refer to the residential locations that are in the European Union (EU), European Economic Area (EEA), and Switzerland.</p><p>If you reside in the Designated Areas, <strong>Synology Inc.</strong> will be the controller of your personal data, except under limited circumstances where Synology holds marketing events in Germany, France, or the United Kingdom, for which <strong>Synology GmbH</strong>, <strong>Synology France SARL</strong>, or <strong>Synology UK Ltd</strong> will respectively be the controller of your personal data. Other than for such limited circumstances, <strong>Synology Inc.</strong> will be responsible for collecting and processing data for our Services, which will be covered by the Terms of Service of the relevant Services.</p><p>If you reside outside the Designated Areas, <strong>Synology Inc.</strong> will be the controller of your personal data. Your usage of services provided by Synology will be bound by the Terms of Service of the relevant Services.</p><p>Synology's Services include providing data processing, order fulfillment, technical support, device replacement, payment invoicing, processing and collection, event registration, customer services, marketing support, as well as the transfer of data based on users' decisions, around the world. The nature of these Services requires us to be able to transfer your personal data into and out of the European Union (EU) to Synology affiliates including <strong>Synology GmbH</strong> and <strong>Synology Inc.</strong>, authorized repair and support centers, authorized logistics companies, communications infrastructure, and other entities deemed necessary to carry out providing these Services. We may also transfer your data to third-party service providers whom we subcontract to work on our behalf or for us and therefore may have access to the data only for purposes of performing these tasks on our behalf and under obligations similar to those described in this Privacy Statement, who perform functions such as data processing, auditing, order fulfillment, managing and enhancing customer data, providing customer service, conducting customer research or satisfaction surveys, marketing support, payment processing and invoice collection support, informational systems technical support, to help us provide, analyze, and improve our Services and to assist us in detecting and dealing with data breaches, illegal activities, and fraud. We may also share your personal data with governments and/or government-affiliated institutions, courts, or law enforcement agencies, to comply with our obligations under relevant laws and regulations, enforce or defend our policies or contract with you, respond to claims, or in response to a verified request relating to a government or criminal investigation; provided that, if any law enforcement agency requests your data, we will attempt to redirect the law enforcement agency to request that data directly from you, and in such event, we may provide your basic contact information to the law enforcement agency. We may also provide your data to third parties involved in a legal proceeding if they provide us with a court order or substantially similar legal procedure requiring us to do so. The above parties are the recipients of your personal data.</p><p>Synology takes measures to ensure that your personal data is processed as required by this Privacy Statement and applicable laws, including to ensure your personal data is transferred to a residential location that has an adequate level of data protection approved by the European Commission. In circumstances where an adequate level of data protection is not available for the residential location of the data recipient, Synology requires that such recipient adopts European Commission-approved Standard Contractual Clauses with Synology as a legal mechanism for data transfer, to ensure that such data is safeguarded and processed by the recipient strictly within the restrictions and conditions set forth in such Standard Contractual Clauses.</p><h2>Your Rights to your Personal Data</h2><p>Synology's services are generally provided on an opt-in basis, with required and collected information differing on a per-service basis. Unless subject to an exemption, you will have the following rights with respect to your personal data:</p><ul><li>The right of access: You may request a copy or specific pieces of your personal data that we have collected at the time.</li><li>The right to request information about the categories of your personal data which we have collected and the categories of sources from whom we have collected such data.</li><li>The right to be informed about the business or commercial purpose for our collection of your personal data.</li><li>The right to request information about the categories of your personal data which we have disclosed to third parties and the categories of third parties to whom we have disclosed your personal data.</li><li>The right of portability: You may request us to transmit your personal data directly to another data controller, where the processing is based on your consent or is necessary for the performance of a contract with you, and in either case, we process the data by automated means. The right to delete data: You can request us and our third-party processors to delete data, subject to applicable laws: You can ask us or our third-party processors to delete data for which we no longer need in order to provide service to you.</li><li>The right to correct or change data: You can modify your contact information through your Synology Account. You can also ask us to change, update, or fix data that are incorrectly presented and unable to be changed by yourself.</li><li>The right to object: You can object to the usage of some or all of your personal data which is based on legitimate interests pursued by Synology.</li><li>The right to restrict the use of data: You can ask us to stop or limit the usage of some or all of your personal data that we no longer need, in order to provide service to you, or have legal rights to retain.</li><li>The right not to be discriminated against by us for exercise any of your above rights.</li></ul><p>You may make these requests by submitting a request through your <a target="_blank" href="https://account.synology.com/support">Synology Account</a> or our <a target="_blank" href="https://www.synology.com/company/contact_us">website</a>. Upon receipt, we will evaluate your request and inform you how we intend to proceed. Under certain circumstances, and according to applicable European Union or European Union state laws and regulations, we may withhold access to your data, or decline to modify, erase, port, or restrict the processing of your data. Synology will respond to your request within thirty days after receiving it. Please be advised that if you exercise the rights to erase data, restrict, or object to our processing, or to withdraw your consent, we may not be able to continue our Services to you if the necessary data is missing for processing.</p><p>If you are a resident in the Designated Areas, you have the right to file a complaint with the <a target="_blank" href="https://www.bfdi.bund.de/EN/Service/Kontakt/contact_node.html">German Federal Commissioner for Data Protection and Freedom of Information</a> (BfDI) or with the competent authority where you reside or in which your data is processed. In case of disagreements relating to Synology’s processing of your personal data, you can submit a request for administrative action to the data protection supervisory authority with the competent authority where you reside or in which your data is processed. Please click <a target="_blank" href="http://ec.europa.eu/newsroom/article29/item-detail.cfm?item_id=612080">here</a> for a list of local data protection authorities in the EEA.</p><h2>Security</h2><p>Synology employs multiple methods of data protection in order to minimize the risk of misuse, unauthorized access and disclosure, and loss of access. Some of these safeguards include the use of pseudonymization, data encryption, data hashing, and other technologies and permission control methods. When our employees directly handle or access your personal information, we do so on secured networks and through fine-grained permission control to limit who can access your information. Data you provide to us is encrypted and stored on both third-party storage and on Synology-managed devices, depending on the service.</p><p>Synology logs and stores IP addresses of both users to our web services solely for security purposes. This log is archived and then removed at irregular intervals depending on ongoing or existing security threats or investigations. If Synology has overwhelming evidence that certain IP addresses, users, or devices may be purposely damaging or hindering our operations or service quality, we may deny further services and/or report such behavior to relevant authorities.</p><p>Synology removes data that is no longer required to provide services based on each service.</p><h2>Changes to Statement</h2><p>Synology may make amendments to this document when needed to reflect statement updates, customer feedback, as well as new products or services. If the terms modify the way we process or handle your data or affect your rights, we will notify you through direct message or by posting notices if we are unable to directly reach you. We encourage that you regularly review this Privacy Statement to understand how your data is handled.</p><h2>Data from Children</h2><p>Synology's products and services are targeted at professionals and are not designed nor intended to be used by children under 16 years of age. Synology does not typically collect date of birth information as it is not used by Synology. If children under the minimum age of the relevant jurisdiction must use Synology's products and services, explicit parental consent must be provided and verified. If Synology is notified or discovers that data collected is from a child under the minimum age, we will take procedures to delete the information as soon as possible.</p><h2>Notice to End Users</h2><p>Certain Synology products or services may be managed or administered to you by organizations or other users. Your use of these managed Synology products or services will be affected by the terms or policies that are provided and dictated by the organization or service provider. Please direct inquiries in these instances to the administrator of the device or service. Synology will not be responsible for the privacy or security practices, including the lawfulness of practices for our customers as they may manage or implement our products and services in a manner that is no longer determined by Synology's policies or agreements.</p><h2>Contact Information</h2><p>You can directly contact us through your <a target="_blank" href="https://account.synology.com/support">Synology Account</a>, or by submitting a form available on our <a target="_blank" href="https://www.synology.com/company/contact_us">website</a> for privacy-related questions or concerns.</p><p>If you are a California resident, you may also contact Synology to this toll-free at 1-866-467-8688 (Service Code 951#). If you are unable to resolve the issue, you have options to exercise your rights as detailed in the previous "Your Rights to your Personal Data" section. Synology will respond to your requests within thirty days after receiving it.</p><p>You may also contact Synology through the following addresses.</p><h5>For users residing in the Designated Areas:</h5><p><code>Synology GmbHAttn: Data ProtectionGrafenberger Allee 295  40237 Düsseldorf  DEUTSCHLAND</code>Tel: +49 211 9666 9666</p><h5>For users residing outside the Designated Areas:</h5><p><code>Synology Inc.Attn: Data Protection9F, No. 1, Yuan Dong Rd.,  Banqiao, New Taipei 220632  TAIWAN</code>Tel: +886 2 2955 1814</p>"
synoaccount_privacy_subtitle	=	"Synology only collects and uses information you give us to provide services to you."
synoaccount_privacy_title	=	"Synology Account Privacy Statement"
synoaccount_tos_checkbox	=	"I have read and agreed to the Synology Account Terms of Service"
synoaccount_tos_content	=	"<h1 id="synology-account-terms-of-service">Synology Account Terms of Service</h1><p>Please read Synology account terms of use (the "<strong>Terms</strong>") carefully. This is a legally binding agreement between Synology Inc. (Synology) and you. By agreeing to and using Synology Account (collectively referred to as "<strong>Services</strong>", you agree to be bound by the terms and conditions described herein and all terms incorporated by reference. If you do not agree to all of these terms, do not use Synology Account and any feature that requires a Synology Account. You must immediately discontinue your use of the Services if you do not agree to the Terms. If you are using the Services on behalf of an organization, you are agreeing to these Terms for that organization and promising that you have the authority to bind that organization to these terms. If your organization has a separate contract in effect with us, the Terms of that contract will govern your use of the Services.</p><p>Synology operates around the world and has adopted English as the controlling language of this document. Additional translations are provided for convenience.</p><h2 id="requirements">Requirements</h2><ol type="1">    <li>Synology Account and its accompanying services are only available to individuals aged 13 years or older, or the equivalent minimum age in the relevant jurisdiction. Synology Account does not contain functionality intended to be utilized by children. Synology does not knowingly collect or use information collected from children unless explicit consent is given by parents or legal guardians.</li>    <li>You must not be barred from receiving the Services under the laws of the United States or other applicable jurisdictions, including your country of residence and of usage.</li>    <li>You agree to not provide false, inaccurate, or misleading information to Synology.</li></ol><h2 id="your-use">Your Use</h2><p>You are solely responsible for your information and your account and any transmissions made when using the Services. Your use of the Services are subject to these Terms and all applicable laws, rules and regulations, including local, state, national and international laws, rules and regulations (including without limitation those governing account collection, export control, consumer protection, unfair competition, anti-discrimination or false advertising).</p><p>When using any of the Services you hereby agree:<br>(i) To comply with all applicable laws, rules and regulations, including local, state, national and international laws, rules and regulations (including without limitation those governing account collection, export control, consumer protection, unfair competition, anti-discrimination or false advertising)<br>(ii) Not to use the Services to post, distribute, or otherwise make available or transmit any software or other computer files that contain a virus, trojan horse, worm or other harmful or destructive component<br>(iii) Not to use the Services for any illegal purposes<br>(iv) Not to use the Services to interfere or disrupt any other networks connected to the Service<br>(v) Not to use the Services to infringe any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy.<br>(vi) Not to use the Services to engage in activities that may violate the privacy of others.</p><p>In connection with your use of the Services, Synology may send you service announcements, administrative messages, and other information. You may opt out of some of those communications.</p><p>If you violate these Terms, we may stop providing Services to you and may elect to close your Synology Account. We may also prevent or stop communications to and from the Services. If an investigation is required to determine violations of these Terms, Synology reserves the right to review your usage history on the Services.</p><h2 id="your-account">Your Account</h2><p>You may need to open a Synology Account in order to use some of our features or services. You will continue to require access to your Synology Account in order to receive important communication from us. You are entirely responsible for maintaining the confidentiality of your password and account, and for any and all activity that occurs under your account. You agree to notify Synology immediately of any unauthorized use of your account or password, or any other breach of security. Synology cannot and will not be liable for any loss that you may incur as a result of someone else using your password or account, either with or without your knowledge. However, you could be held liable for losses incurred by Synology or another party due to someone else using your account or password. You may not use anyone else's account at any time, without the explicit permission of the account holder.</p><h2 id="features-and-services">Features and Services</h2><ol type="1">    <li>Device and License Management You may be required to register your Synology device with you Synology Account in order to obtain licensing or other Services. If you do not agree to register your device, Synology may be unable to provide you certain services such as licenses, QuickConnect and Synology DDNS service, and Technical Support.</li>    <li>QuickConnect and Dynamic Domain Name Service (DDNS) Users who wish to use this service must register their Synology device to a Synology Account. Synology is unable to guarantee that you will obtain a desired domain name registration, even if an inquiry indicates that a domain name was available at one point in time. You represent that, to the best of your knowledge and belief, that neither the registration of the domain name nor the manner in which it is directly or indirectly to be used, infringes upon the legal rights of a third party. You also agree that you will not use the registered domain name for illegal purposes.<br><br>Synology, in its sole discretion, reserves the right to reject, cancel, suspend, transfer, or modify any domain name registration to correct a mistake, protect the integrity and stability of the Services or any applicable registry, and to comply with any applicable laws, government rules, or requirements. Synology also retains these rights when, at the requests of law enforcement, legal disputes, or to avoid any liability, both civil or criminal.</li>    <li>Technical Support Your Synology Account provides a way to track support tickets. Submit, view ticket status, communicate with support team, view technical support service history in one self-service portal. During troubleshooting, Synology may request additional information that is required to resolve the matter.<br><br>Synology reserves the right to determine on a case-by-case basis on which support tickets constitutes as a reasonable request. Synology may, at our discretion, reject problems or issues that may arise out of using Synology devices in an unsupported manner or environment, on Synology devices that have exceeded their <a href="https://www.synology.com/company/legal/warranty">warranty</a>, or when the source of the problem or issue is not attributable to the Synology device. Synology will make reasonable effort to resolve a support ticket in a reasonable amount of time. Synology does not guarantee a specific response time unless otherwise stated.</li>    <li>Payment Services In the event you need to make payment on spare parts, support service charge, or event registration fee, you may conduct the process in Synology Account. By doing so, You acknowledge that your payment method may require us to send your charges to a third party, such as a payment processor.<br><br>The fee excludes all taxes and other charges as stated with the purchased item or service (such as VAT, sale tax, and etc.), unless stated otherwise. You are responsible for any taxes that you are obligated to pay or that we may collect from you and all other charges to be incurred. Any currency exchange settlements are based on your contract with your payment method provider.<br><br>Synology reserves the right to deny any transaction. Please contact Synology Technical Support for issues related to refunds or suspected fraudulent usage.</li>    <li>Log In Services Synology Account may be utilized to provide sign in capabilities to other Synology devices or services. For more information, you should refer to the <strong>Privacy Statement</strong> or additional Terms of Service or equivalent documentation.</li></ol><h2 id="privacy">Privacy</h2><p>Synology's <a href="https://www.synology.com/company/legal/privacy">Privacy Policy</a> explains how Synology treats your personal data and protects your privacy when you use the Services. By using the Services, you agree that Synology can use such data in accordance with our privacy policies.</p><h2 id="intellectual-property">Intellectual Property</h2><p>Other than the limited rights and licenses expressly set forth in this Agreement, Synology reserves all right, title and interest (including all intellectual property and proprietary rights) in and to the Services and any other technology and software that Synology provides or uses to provide the Service. You do not, by virtue of this Term or otherwise, acquire any ownership interest or rights in the Services or such other technology and software, except for the limited use and access rights described in this Term.</p><p>These Terms do not grant you the right to use any intellectual property, including branding or logos used in the Services. Don't remove, obscure, or alter any legal notices or logos displayed in or along with the Services.</p><h2 id="modifying-and-terminating-our-services">Modifying and Terminating our Services</h2><p>Synology is constantly changing and improving the Services. Synology may add or remove functionalities or features, and may suspend or stop a Service altogether.</p><p>You can stop using the Services at any time. Synology may also stop providing Services to you, or add/create new limits to the Services at any time.</p><p>If Synology discontinues specific Services, when feasible, Synology will give you reasonable advanced notice.</p><h2 id="business-uses-of-the-services">Business uses of the Services</h2><p>If you are using our Services on behalf of a business, that business accepts and is legally bound by these terms. It will hold harmless and indemnify Synology and its affiliates, officers, agents, and employees from any claim, suit or action arising from or related to the use of the Services or violation of these terms, including any liability or expense arising from claims, losses, damages, suits, judgments, litigation costs and attorneys' fees.</p><h2 id="about-these-terms">About these Terms</h2><p>Synology may modify these terms or any additional terms that apply to the Services, for example, reflect changes to the law or changes to the Services. It is recommended to look at the terms regularly. Synology will post notice of modifications to these terms on this page. However, changes addressing new functions for a Services or changes made for legal reasons may be made effective immediately. If you do not agree to the modified terms for a Services, you should discontinue your use of that Services.</p><p>If you do not comply with these terms, and Synology doesn't take action right away, this doesn't mean that Synology is giving up any rights that Synology may have (such as taking action in the future).</p><h2 id="indemnification">Indemnification</h2><p>You agree to defend, indemnify, and hold harmless Synology, its affiliated companies and their independent contractors, service providers and consultants, and their respective directors, employees and agents, from and against any actual or threatened suit, demand, claim, or action and any damages, costs, liabilities and expenses (including, but not limited to, reasonable attorneys' fees) arising out of or related to any Synology Account use, store or otherwise transmit on or through the Services, your conduct with respect to the Services, your violation of these Terms or your violation of the rights of any third party.</p><h2 id="disclaimer">Disclaimer</h2><p>EXCEPT AS EXPRESSLY PROVIDED TO THE CONTRARY IN A WRITING BY SYNOLOGY, THE SERVICES, THE SERVICES CONTAINED THEREIN AND PROVIDED ON OR IN CONNECTION THEREWITH (THE "<strong>SERVICES</strong>") ARE PROVIDED ON AN "AS IS" BASIS WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED. SYNOLOGY AND ITS AFFILIATES COMPANIES DISCLAIM ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT AS TO THE SERVICES, THE INFORMATION, CONTENT, AND ALL OTHER MATERIALS IN THE SERVICES. NEITHER SYNOLOGY NOR ITS AFFILIATED COMPANIES REPRESENT OR WARRANT THAT MATERIALS IN THE SERVICES ARE ACCURATE, COMPLETE, RELIABLE, CURRENT OR ERROR-FREE OR THAT THE SERVICES OR ITS SERVERS ARE FREE OF VIRUSES OR OTHER HARMFUL COMPONENTS.</p><h2 id="limitation-of-liability">Limitation of Liability</h2><p>IN NO EVENT SHALL SYNOLOGY, ITS AFFILIATED COMPANIES, OR THEIR RESPECTIVE DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE FOR ANY DIRECT, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR ANY OTHER DAMAGES OF ANY KIND, INCLUDING BUT NOT LIMITED TO LOSS OF USE, LOSS OF PROFITS OR LOSS OF DATA, WHETHER IN AN ACTION IN CONTRACT, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE) OR OTHERWISE, ARISING OUT OF OR IN ANY WAY CONNECTED WITH THE USE OF OR INABILITY TO USE THE SERVICES, OR THE CONTENT (INCLUDING BUT NOT LIMITED TO ANY THIRD PARTY CONTENT) CONTAINED IN OR ACCESSED THROUGH THE SERVICES, INCLUDING WITHOUT LIMITATION ANY DAMAGES CAUSED BY OR RESULTING FROM RELIANCE BY YOU ON ANY INFORMATION OBTAINED FROM SYNOLOGY OR ITS AFFILIATED COMPANIES, OR THAT RESULT FROM MISTAKES, OMISSIONS, INTERRUPTIONS, DELETION OF FILES OR EMAIL, ERRORS, DEFECTS, VIRUSES, DELAYS IN OPERATION OR TRANSMISSION OR ANY FAILURE OF PERFORMANCE, WHETHER OR NOT RESULTING FROM ACTS OF GOD, COMMUNICATIONS FAILURE, THEFT, DESTRUCTION OR UNAUTHORIZED ACCESS TO SYNOLOGY'S RECORDS, PROGRAMS OR SERVICES. WITHOUT LIMITING THE FOREGOING, IN NO EVENT SHALL THE AGGREGATE LIABILITY OF SYNOLOGY OR ITS AFFILIATED COMPANIES, WHETHER IN CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE, WHETHER ACTIVE, PASSIVE OR IMPUTED), PRODUCT LIABILITY, STRICT LIABILITY OR OTHER THEORY, ARISING OUT OF OR RELATING TO THE USE OF OR INABILITY TO USE THE SERVICES EXCEED ANY COMPENSATION YOU PAY, IF ANY, TO SYNOLOGY OR ITS AFFILIATED COMPANIES FOR ACCESS TO OR USE OF THE SERVICES IN THE TWELVE (12) MONTHS PRECEDING THE EVENT GIVING RISE TO SUCH LIABILITY.</p><h2 id="how-to-contact-us">How to Contact Us</h2><p>If there is a conflict between these terms and the additional terms, the additional terms shall prevail.</p><p>These Terms control the relationship between "Synology" and you. These Terms are a contract between you and Synology Inc., 9F, No.1, Yuan Dong Rd., Banqiao, New Taipei 220632, Taiwan. They do not create any third party beneficiary rights.</p><p>If it turns out that a particular term is not enforceable, this will not affect any other terms.</p><p>Any disputes arising out of or relating to these terms or the Services shall be governed by the laws of the Republic of China and shall be subject to the jurisdiction of the District Court of Taipei, Taiwan, R.O.C.</p><p>For information about how to contact Synology, please visit our <a href="http://www.synology.com/company/contact_us">contact page</a>.</p>"
synoaccount_tos_subtitle	=	"Synology Account is a platform that provides convenient remote access and technical support services for your Synology product."
synoaccount_tos_title	=	"Synology Account Terms of Service"
take_advantage_services	=	"Take control of Synology services"
take_advantage_services_desc	=	"Effortlessly manage your device information, purchase history, add-on licenses, and support tickets."
termsofservice_accept	=	"I have read and agree to the Synology Package Center Terms of Services"
termsofservice_desc	=	"By confirming the installation, you agree to be bound by the {0}. Please read them carefully."
tip_control_panel	=	"More settings are available at Control Panel!"
tip_main_menu	=	"Access all built-in and installed packages from Main Menu!"
tip_network_speed	=	"We've detected that your Ethernet speed is 10/100Mbps only. To ensure the highest performance, it is recommended upgrading your network cable and router to at least 1Gbps."
tip_pkg_center	=	"Discover more applications at Package Center!"
tip_title	=	"Tip {0}"
tip_tutorial	=	"Let's start from here!"
tips_default_service_ip_not_in_ip_pool	=	"Default service IP should be within the IP pool range."
tips_network_input_invalid	=	"Network configuration is invalid. Please check your IP, subnet mask, and gateway settings."
tray_active_insight_new_service_desc	=	"Active Insight adds a new service for faster technical support process. Please read our <a class="link-font" href="https://www.synology.com/company/legal/privacy" target="_blank">Privacy Statement</a> and <a class="link-font" href="https://www.synology.com/company/legal/Services_Data_Collection_Disclosure#active-insight" target="_blank">Services Data Collection Disclosure</a>. Launch {0}Active Insight{1} for more information."
tray_active_insight_new_service_title	=	"Service Update Notice"
udc_desc	=	"We will collect device information and hardware configurations to improve our services and personalize your experience. Personally identifiable data will be excluded. Please refer to our {0}Privacy Statement{1} for details."
udc_later	=	"Remind me later"
udc_statement_checkbox	=	"I acknowledged the Device Analytics Privacy Statement"
udc_statement_content	=	"<h1>PRIVACY STATEMENT</h1><h2>Introduction</h2><p>Synology holds itself to high standards in handling and processing personal information. The statement outlined below establishes the boundaries of what Synology processes and what you, as our customer and the data subject ("<strong>users</strong>"), are entitled to. This Privacy Statement applies when you use our features and services ("<strong>Services</strong>"). Additionally, we have a Cookie Policy for use of our website.</p><p>Synology operates around the world and has adopted English as the controlling language of this Privacy Statement. Additional translations are provided for convenience. You may switch to other languages by using the language selection button at the bottom of the webpage.</p><p>This Privacy Statement applies to Synology-provided services offered on Synology-owned websites, Synology-branded applications, services provided from physical Synology products ("<strong>Synology Devices</strong>"), and digital or physical services directly offered by Synology. For specific programs, products, or Services offered by Synology, individual Service-specific privacy policies may supersede and prevail over this Privacy Statement or supplement this Privacy Statement in relevant parts.</p><h2>Your Personal Data</h2><p>Personal data refers to identifying information that relates to, describe, is capable of being associated with, or can reasonably be linked directly or indirectly to, an individual or a household. Identification can be by the data alone or in conjunction with any other data in the data controller's possession or likely to come into such possession. Synology collects information only to provide you with the Services and to improve user experiences. To provide you with Synology Devices or Services, including responding to your inquiries, we may ask for your personal information. If you choose not to provide the requested information, we may be unable to deliver the desired Services. Most of Synology's Services are provided under a Synology Account, and if you no longer require the Service or wish to have your data removed, you may delete your Synology Account.</p><p>In general, Synology collects personal data from you through your use of our Services. Synology also uses cookies and other technologies to gather information regarding a visitor's browsing preferences. The data we collect and store from you, including in the preceding 12 months, may consist of the following data categories:</p><ul><li>Contact Information: Your e-mail address (used as identification for our services and as the primary communication method), name, address, phone number, and additional contact detail that are used to provide registration, device shipping, and billing verification services.</li><li>Commercial information: Your payment method and financial data (credit card, bank account number, etc.), which is used for payment transactions for a service or product, logistics, and billing data (such as customs ID and tracking number).</li><li>Technical Information: Your IP address, device's location (latitude and longitude), unique device identifiers, referral URL, computer and connection data (such as the type of operating system you use, device and software information, browser type, browser language and version, ad data, access times, Internet or other network activity such as weblog information) used for fraud prevention, security purposes, warranty registration, customer support services, providing desired functionality, and for transactions.</li><li>Account Information: Your account name, Internet, or other network activity information such as account login, account activity, transaction data, and any information you provide during a transaction, or other transaction-based content that you generate or connected to your account as a result of your transaction.</li><li>Communication History: Your chat and service history with us, and any other information you may provide us when you interact with us.</li></ul><p>Other information that you provide to us through digital or physical means may be stored on a case-by-case basis depending on the reason it was provided.</p><p>Synology does not access (or use) files uploaded by users to their devices.</p><p>Learn more from our <strong><a target="_blank" href="https://www.synology.com/company/legal/Services_Data_Collection_Disclosure">Services Data Collection Disclosure</a></strong> for specific Services and <strong><a target="_blank" href="https://www.synology.com/company/legal/cookie_policy">Cookie Policy</a></strong> for specific information on the data processed and ways they are stored for each Service.</p><h2>Lawful Bases and Other Usage</h2><p>The lawful bases for Synology to process your personal data for the various types of processing performed on your personal data are, as applicable, processing based on your consent, as necessary for us to enter into and to perform our contract with you, or in certain circumstances, as necessary for Synology to pursue our "legitimate interests", where our interests are not outweighed by your rights and freedoms.</p><p>"Legitimate interest" situations necessitating such actions may include the following: to protect you, us, or others from security threats, to comply with laws we are subjected to, to implement information sharing within Synology's group affiliates, to prevent fraud, misuse of company IT systems, to operate a whistleblowing scheme, for purposes of mergers and acquisitions, and to perform internal investigations and auditing.</p><p>Synology will collect, process, and use the personal data supplied by you only for the purposes communicated to you and will not disclose your data to third parties except under the lawful bases set forth above. Synology does not share your personal information with third parties for the purpose of direct marketing. Synology also does not engage in the selling of personal data to any third party.</p><p>The purposes for which Synology collects and processes personal data may include, but not limited to:</p><ul><li>Operating our websites to provide you access to and use of our websites and Services;</li><li>Administering your use of our Services, to communicate with you and respond to your requests;</li><li>Managing your Synology Account;</li><li>Customizing your Service experience with us, to improve our Services and products;</li><li>Providing you with our online or offline marketing measures and activities; including but not limited to newsletters, online and live event registrations, and other promotional information and materials; </li><li>Sharing your contact details with our subsidiaries, affiliates, authorized repair and support centers, authorized logistics companies, communications infrastructure, and other entities deemed necessary to carry out providing these Services to you;</li><li>Sharing your contact details with our affiliate offices around the world within our group of companies for the purposes of internal administration and back-office support;</li><li>Ensuring our network security, and to prevent fraud;</li><li>Enforcing or defending our policies or contract with you; and </li><li>Maintaining the integrity and safety of our data technology systems that store and process your personal data. </li></ul><p>You are not under any obligation to provide us any of your personal data. However, please note that without certain data from you, we may not able to undertake some or all of our obligations to you under our contract with you, or adequately provide you with our full range of services. If you would like to obtain more detail about this, please contact us following the instructions in the "Contact Information" section below.</p><h2>Period of Storage</h2><p>Synology keeps your personal data for no longer than reasonably necessary for the given purpose for which your data is processed. If you will provide us, or have provided us, consent for us to process your data, we will process your data for no longer than your consent is effective. Notwithstanding the above, we may retain your personal data as required by applicable laws and regulations, as necessary to assist with any government and judicial investigations, to initiate or defend legal claims or for the purpose of civil, criminal, or administrative proceedings. If none of the above grounds for us to keep your data apply, we will delete and dispose of your data in a secure manner.</p><h2>Data Controllers, Contracting Parties, Transfer of Data</h2><p>We use the term "<strong>Designated Areas</strong>" to refer to the residential locations that are in the European Union (EU), European Economic Area (EEA), and Switzerland.</p><p>If you reside in the Designated Areas, <strong>Synology Inc.</strong> will be the controller of your personal data, except under limited circumstances where Synology holds marketing events in Germany, France, or the United Kingdom, for which <strong>Synology GmbH</strong>, <strong>Synology France SARL</strong>, or <strong>Synology UK Ltd</strong> will respectively be the controller of your personal data. Other than for such limited circumstances, <strong>Synology Inc.</strong> will be responsible for collecting and processing data for our Services, which will be covered by the Terms of Service of the relevant Services.</p><p>If you reside outside the Designated Areas, <strong>Synology Inc.</strong> will be the controller of your personal data. Your usage of services provided by Synology will be bound by the Terms of Service of the relevant Services.</p><p>Synology's Services include providing data processing, order fulfillment, technical support, device replacement, payment invoicing, processing and collection, event registration, customer services, marketing support, as well as the transfer of data based on users' decisions, around the world. The nature of these Services requires us to be able to transfer your personal data into and out of the European Union (EU) to Synology affiliates including <strong>Synology GmbH</strong> and <strong>Synology Inc.</strong>, authorized repair and support centers, authorized logistics companies, communications infrastructure, and other entities deemed necessary to carry out providing these Services. We may also transfer your data to third-party service providers whom we subcontract to work on our behalf or for us and therefore may have access to the data only for purposes of performing these tasks on our behalf and under obligations similar to those described in this Privacy Statement, who perform functions such as data processing, auditing, order fulfillment, managing and enhancing customer data, providing customer service, conducting customer research or satisfaction surveys, marketing support, payment processing and invoice collection support, informational systems technical support, to help us provide, analyze, and improve our Services and to assist us in detecting and dealing with data breaches, illegal activities, and fraud. We may also share your personal data with governments and/or government-affiliated institutions, courts, or law enforcement agencies, to comply with our obligations under relevant laws and regulations, enforce or defend our policies or contract with you, respond to claims, or in response to a verified request relating to a government or criminal investigation; provided that, if any law enforcement agency requests your data, we will attempt to redirect the law enforcement agency to request that data directly from you, and in such event, we may provide your basic contact information to the law enforcement agency. We may also provide your data to third parties involved in a legal proceeding if they provide us with a court order or substantially similar legal procedure requiring us to do so. The above parties are the recipients of your personal data.</p><p>Synology takes measures to ensure that your personal data is processed as required by this Privacy Statement and applicable laws, including to ensure your personal data is transferred to a residential location that has an adequate level of data protection approved by the European Commission. In circumstances where an adequate level of data protection is not available for the residential location of the data recipient, Synology requires that such recipient adopts European Commission-approved Standard Contractual Clauses with Synology as a legal mechanism for data transfer, to ensure that such data is safeguarded and processed by the recipient strictly within the restrictions and conditions set forth in such Standard Contractual Clauses.</p><h2>Your Rights to your Personal Data</h2><p>Synology's services are generally provided on an opt-in basis, with required and collected information differing on a per-service basis. Unless subject to an exemption, you will have the following rights with respect to your personal data:</p><ul><li>The right of access: You may request a copy or specific pieces of your personal data that we have collected at the time.</li><li>The right to request information about the categories of your personal data which we have collected and the categories of sources from whom we have collected such data.</li><li>The right to be informed about the business or commercial purpose for our collection of your personal data.</li><li>The right to request information about the categories of your personal data which we have disclosed to third parties and the categories of third parties to whom we have disclosed your personal data.</li><li>The right of portability: You may request us to transmit your personal data directly to another data controller, where the processing is based on your consent or is necessary for the performance of a contract with you, and in either case, we process the data by automated means. The right to delete data: You can request us and our third-party processors to delete data, subject to applicable laws: You can ask us or our third-party processors to delete data for which we no longer need in order to provide service to you.</li><li>The right to correct or change data: You can modify your contact information through your Synology Account. You can also ask us to change, update, or fix data that are incorrectly presented and unable to be changed by yourself.</li><li>The right to object: You can object to the usage of some or all of your personal data which is based on legitimate interests pursued by Synology.</li><li>The right to restrict the use of data: You can ask us to stop or limit the usage of some or all of your personal data that we no longer need, in order to provide service to you, or have legal rights to retain.</li><li>The right not to be discriminated against by us for exercise any of your above rights.</li></ul><p>You may make these requests by submitting a request through your <a target="_blank" href="https://account.synology.com/support">Synology Account</a> or our <a target="_blank" href="https://www.synology.com/company/contact_us">website</a>. Upon receipt, we will evaluate your request and inform you how we intend to proceed. Under certain circumstances, and according to applicable European Union or European Union state laws and regulations, we may withhold access to your data, or decline to modify, erase, port, or restrict the processing of your data. Synology will respond to your request within thirty days after receiving it. Please be advised that if you exercise the rights to erase data, restrict, or object to our processing, or to withdraw your consent, we may not be able to continue our Services to you if the necessary data is missing for processing.</p><p>If you are a resident in the Designated Areas, you have the right to file a complaint with the <a target="_blank" href="https://www.bfdi.bund.de/EN/Service/Kontakt/contact_node.html">German Federal Commissioner for Data Protection and Freedom of Information</a> (BfDI) or with the competent authority where you reside or in which your data is processed. In case of disagreements relating to Synology’s processing of your personal data, you can submit a request for administrative action to the data protection supervisory authority with the competent authority where you reside or in which your data is processed. Please click <a target="_blank" href="http://ec.europa.eu/newsroom/article29/item-detail.cfm?item_id=612080">here</a> for a list of local data protection authorities in the EEA.</p><h2>Security</h2><p>Synology employs multiple methods of data protection in order to minimize the risk of misuse, unauthorized access and disclosure, and loss of access. Some of these safeguards include the use of pseudonymization, data encryption, data hashing, and other technologies and permission control methods. When our employees directly handle or access your personal information, we do so on secured networks and through fine-grained permission control to limit who can access your information. Data you provide to us is encrypted and stored on both third-party storage and on Synology-managed devices, depending on the service.</p><p>Synology logs and stores IP addresses of both users to our web services solely for security purposes. This log is archived and then removed at irregular intervals depending on ongoing or existing security threats or investigations. If Synology has overwhelming evidence that certain IP addresses, users, or devices may be purposely damaging or hindering our operations or service quality, we may deny further services and/or report such behavior to relevant authorities.</p><p>Synology removes data that is no longer required to provide services based on each service.</p><h2>Changes to Statement</h2><p>Synology may make amendments to this document when needed to reflect statement updates, customer feedback, as well as new products or services. If the terms modify the way we process or handle your data or affect your rights, we will notify you through direct message or by posting notices if we are unable to directly reach you. We encourage that you regularly review this Privacy Statement to understand how your data is handled.</p><h2>Data from Children</h2><p>Synology's products and services are targeted at professionals and are not designed nor intended to be used by children under 16 years of age. Synology does not typically collect date of birth information as it is not used by Synology. If children under the minimum age of the relevant jurisdiction must use Synology's products and services, explicit parental consent must be provided and verified. If Synology is notified or discovers that data collected is from a child under the minimum age, we will take procedures to delete the information as soon as possible.</p><h2>Notice to End Users</h2><p>Certain Synology products or services may be managed or administered to you by organizations or other users. Your use of these managed Synology products or services will be affected by the terms or policies that are provided and dictated by the organization or service provider. Please direct inquiries in these instances to the administrator of the device or service. Synology will not be responsible for the privacy or security practices, including the lawfulness of practices for our customers as they may manage or implement our products and services in a manner that is no longer determined by Synology's policies or agreements.</p><h2>Contact Information</h2><p>You can directly contact us through your <a target="_blank" href="https://account.synology.com/support">Synology Account</a>, or by submitting a form available on our <a target="_blank" href="https://www.synology.com/company/contact_us">website</a> for privacy-related questions or concerns.</p><p>If you are a California resident, you may also contact Synology to this toll-free at 1-866-467-8688 (Service Code 951#). If you are unable to resolve the issue, you have options to exercise your rights as detailed in the previous "Your Rights to your Personal Data" section. Synology will respond to your requests within thirty days after receiving it.</p><p>You may also contact Synology through the following addresses.</p><h5>For users residing in the Designated Areas:</h5><p><code>Synology GmbHAttn: Data ProtectionGrafenberger Allee 295  40237 Düsseldorf  DEUTSCHLAND</code>Tel: +49 211 9666 9666</p><h5>For users residing outside the Designated Areas:</h5><p><code>Synology Inc.Attn: Data Protection9F, No. 1, Yuan Dong Rd.,  Banqiao, New Taipei 220632  TAIWAN</code>Tel: +886 2 2955 1814</p>"
udc_statement_title	=	"Device Analytics Privacy Statement"
udc_subtitle	=	"Join us in building a better experience by sharing diagnostic data. You maintain control over your privacy, and can adjust your settings at any time."
udc_sure	=	"Yes"
udc_title	=	"Device Analytics"
udc_welcome_desc	=	"Enabling Device Analytics allows Synology to collect data used for analyzing device usage and improve user experience. Please keep in mind that we respect your privacy and that the data is aggregated and cannot be used to identify individual users.<br>For more information, please refer to <a class="link-font" href="https://www.synology.com/company/legal/Services_Data_Collection_Disclosure" target="_blank">Device Analytics Data Collection Disclosure</a> and <a class="link-font" href="https://www.synology.com/company/legal/privacy" target="_blank">Synology Privacy Statement</a>. <br/><br/>Do you want to enable Device Analytics?"
udc_welcome_question	=	"Do you want to enable device analytics?"
udc_welcome_title	=	"Device Analytics"
unload_hint	=	"If this web page is unexpectedly refreshed or closed, please sign in to your _OSNAME_ again as "admin" and leave the password blank."
up_to_date_desc	=	"Synology releases _OSNAME_ updates from time to time. Install the updated _OSNAME_ version for new features, security fixes, and improved system stability."
up_to_date_title	=	"Keep your system up-to-date"
update_setting_set_fail	=	"Failed to set up _OSNAME_ update settings. Please go to Control Panel > _OSNAME_ Update and check your update settings."
update_setting_subtitle	=	"Protect your _DISKSTATION_ and important data"
update_setting_subtitle_tip	=	"You can still change update settings later at Control Panel > Update & Restore."
update_setting_title	=	"_OSNAME_ Update & Maintenance"
update_setting_type_all	=	"Install the latest _OSNAME_ version automatically"
update_setting_type_all_desc	=	"The latest _OSNAME_ version and all updates, including new features, enhancements, important updates, and security fixes will be automatically installed."
update_setting_type_download	=	"Download _OSNAME_ updates and install them manually"
update_setting_type_hotfix	=	"Install the important updates of _OSNAME_ automatically"
update_setting_type_hotfix_desc	=	"Only important updates and security fixes will be automatically installed while retaining the current _OSNAME_ version."
update_setting_type_hotfix_tip	=	"Important updates typically include fixes for security vulnerabilities and critical issues."
update_setting_type_notify	=	"Notify me of _OSNAME_ updates and let me install them manually"
upgrade_error	=	"Unable to perform this operation. You can update _OSNAME_ later in <b>Control Panel</b> > <b>Update & Restore</b> > <b>_OSNAME_ Update</b>."
upgrade_has_new_version	=	"An update is available for download."
url_copied	=	"URL copied"
useful_terms_privacy	=	"Please read our {0}Terms of Services{1} and {2}Privacy Statement{3} before using our services."
useful_tools_subtitle	=	"These tools will help manage your devices simply and effortlessly."
useful_tools_title	=	"Explore other useful tools"
waiting_install_pkgs	=	"Waiting to install packages..."
want_change_mind	=	"Would you like to reconsider?"
want_change_mind_desc	=	"You're about to miss out on many awesome features that will help manage your device simply and effortlessly. Would you like to reconsider and create a Synology Account now?"
welcome_access	=	"Access files on your _DISKSTATION_"
welcome_access_desc	=	"File Station allows you to store and access files on the _DISKSTATION_ via a web-based interface. If you prefer browsing files with your local file explorers, enable the Win/Mac/NFS service on the Win/Mac/NFS page.<br>To access and manage files on the go, install <a href="http://www.synology.com/dsm/home_mobile_support_ds_file.php" target="_blank">DS file</a> on your mobile devices."
welcome_access_title	=	"Access Your Files"
welcome_account_info_tip	=	"The username is the administrator account for signing in to and managing your {0}."
welcome_admin_account_desc	=	"Below info will be used to manage your {0}"
welcome_admin_account_id	=	"Username"
welcome_admin_account_title	=	"Get started with your {0}"
welcome_admin_agree_eula	=	"By clicking Next, you agree to the <a href="https://www.synology.com/company/legal/terms_EULA" target="_blank" class="pathlink">End User License Agreement</a>."
welcome_admin_create_shr	=	"Create a Synology Hybrid RAID (SHR) storage space after installation"
welcome_admin_eula_agreement	=	"End User License Agreement"
welcome_admin_server_name	=	"Server name"
welcome_app_title	=	"Quick Start"
welcome_click_here	=	"Click here"
welcome_cloud_title	=	"Cloud Service"
welcome_creating_shr	=	"Preparing storage space..."
welcome_creating_user	=	"Creating user account..."
welcome_drag_to_desktop	=	"Drag me to the desktop"
welcome_email_addr	=	"Email address"
welcome_enable_register_ip	=	"Allow this _DISKSTATION_ to be displayed in {0}. Synology will collect the IP address and port information, which will only be used for providing {0} service. Refer to the {1}Services Data Collection Disclosure{2} and {3}Privacy Statement{4} for details."
welcome_enable_register_ip_tip	=	"This option allows Synology to know your IP address to help {1} find {0} over a complex network. You can disable it later at Control Panel > Info Center > Usage."
welcome_end_desc	=	"Let's take a quick guided tour of _OSNAME_"
welcome_end_title	=	"You Are All Set!"
welcome_external_device_desc	=	"Feel free to plug in any USB drives or SD card to have a fully joyful experience. <b>Devices and Printers</b> provide options to manage your external devices including USB drives and printers."
welcome_external_device_title	=	"Welcome to {0} "
welcome_ezinternet_desc	=	"Set up your _DISKSTATION_ and its applications to access _DISKSTATION_ over the Internet by configuring network settings, port forwarding rules, firewall, and DDNS services."
welcome_ezinternet_title	=	"EZ-Internet"
welcome_go	=	"Go"
welcome_install_desc	=	"These packages will help you get started with _OSNAME_ effortlessly"
welcome_install_pkg_fail	=	"Failed to install the following packages: {0}. Please go to Package Center to install the packages later."
welcome_install_pkg_success	=	"The packages have been successfully installed!"
welcome_install_surv_desc	=	"Surveillance Station will help you safeguard your precious properties"
welcome_install_surv_fail	=	"Failed to install the following packages: Surveillance Station. Please go to Package Center to install the packages later."
welcome_install_surv_title	=	"Install Surveillance Station"
welcome_install_title	=	"Install Synology's Recommended Packages"
welcome_multimedia_desc	=	"Packages installed on your EDS14 activate your entertainment center. You can start saving your multimedia contents at your disposal. It's the beginning of your amazing entertaining experience."
welcome_multimedia_title	=	"Ready to Get Entertained!"
welcome_myds	=	"What's Synology Account?"
welcome_myds_desc	=	"Synology Account is an integrated service account that allows you to quickly set up your DDNS and QuickConnect services, view your Synology Account information and personal purchase history of Synology packages, and subscribe to the latest information issued by Synology."
welcome_nas_address	=	"QuickConnect"
welcome_open_external_device	=	"Open <b>Devices and Printers</b>"
welcome_open_ez_internet	=	"Open <b>EZ-Internet</b>"
welcome_open_file_station	=	"Open <b>File Station</b>"
welcome_open_group	=	"Open the <b>Group</b> setup page"
welcome_open_package	=	"Open <b>Package Center</b>"
welcome_open_quick_connect	=	"Open <b>QuickConnect</b>"
welcome_open_shared_folder	=	"Open the <b>Shared Folder</b> setup page"
welcome_open_storage	=	"Open <b>Storage Manager</b>"
welcome_open_user	=	"Open the <b>User</b> setup page"
welcome_open_win_mac_nfs	=	"Open the <b>Win/Mac/NFS</b> setup page"
welcome_package_audio	=	"Audio Station"
welcome_package_desc	=	"Download more applications from Package Center to expand the functions of your _DISKSTATION_. To enjoy multimedia contents, download the applications on the Multimedia section according to your preferences.<br>Multimedia mobile apps can be found <a href="http://www.synology.com/dsm/home_mobile_support_ds_audio.php" target="_blank">here</a>. They are also available for download on your mobile devices."
welcome_package_download	=	"Download Station"
welcome_package_drive	=	"Drive"
welcome_package_mediaserver	=	"Media Server"
welcome_package_moments	=	"Moments"
welcome_package_photo	=	"Photo Station"
welcome_package_title	=	"Package Center"
welcome_package_video	=	"Video Station"
welcome_page_desc	=	"You have set up the administrator account. Please complete the following steps with this account."
welcome_page_title	=	"Welcome to DSM {0}"
welcome_pkg_install	=	"Install"
welcome_quick_connect_desc	=	"QuickConnect makes the connection of your mobile devices to EDS14 way easier than you think, without the hassle of setting up network setup."
welcome_quick_connect_title	=	"Connecting Anytime, Anywhere"
welcome_quickcnt	=	"What's QuickConnect?"
welcome_quickcnt_desc	=	"With QuickConnect provided by Synology Account, you can access your _DISKSTATION_ from outside your home without any network configurations like port forwarding and firewall settings. You can enjoy the files stored on your _DISKSTATION_ anywhere and anytime!"
welcome_quickcnt_id	=	"QuickConnect ID"
welcome_quickcnt_service_desc	=	"You can now access your {0} with the following address"
welcome_quickcnt_service_title	=	"QuickConnect Is Ready"
welcome_register_account	=	"Create QuickConnect ID with a new <span class="desc-link">Synology Account</span>"
welcome_register_account_general	=	"Create a new Synology Account"
welcome_send_data	=	"Help make _OSNAME_ better by sending anonymous statistical information to Synology."
welcome_server_name_tip	=	"The server name will appear on the login page of your {0} and when it is searched within your local network."
welcome_servername	=	"Set up a server name and the time zone"
welcome_setup_quickcnt_desc	=	"QuickConnect makes it easy to access your {0} without port forwarding"
welcome_setup_quickcnt_desc2	=	"Access your {0} anywhere with QuickConnect"
welcome_setup_quickcnt_title	=	"Set up QuickConnect"
welcome_shared_folder_desc	=	"Shared folders are the basic directories where you can store and manage files and folders on your _DISKSTATION_. You need to create at least one shared folder which can be accessed by specific users or user groups according to the access privileges you grant."
welcome_shared_folder_title	=	"File Sharing"
welcome_show_confirm	=	"You are leaving Quick Start. For more information on using Synology _OSNAME_ instructions, please see <b>_OSNAME_ Help</b>, or visit the <a href="http://www.synology.com/support/tutorials.php" target="_blank">Synology website</a> for online tutorials.<br>Do you want to show this wizard at next login?"
welcome_skip_alias	=	"Skip this step"
welcome_smart_quick_test_tip	=	"S.M.A.R.T. Quick Test will be performed on all drives every month."
welcome_smart_test	=	"Run S.M.A.R.T. tests to check the health of my drives periodically"
welcome_smart_test_tip	=	"S.M.A.R.T. Quick Test will be performed on all drives every month; Extended Test will be performed on all drives every six months."
welcome_start_dsm_uc	=	"Start"
welcome_status_install	=	"Installed"
welcome_status_waiting	=	"Waiting..."
welcome_storage_create	=	"You need to create a volume for your _DISKSTATION_ to store data. Create now?"
welcome_storage_create_no	=	"No. I will do it later."
welcome_storage_create_yes	=	"Yes. Create a volume now."
welcome_storage_creating	=	"Your _DISKSTATION_ is creating a volume..."
welcome_storage_desc	=	"Storage Manager allows you to manage your hard disks and storage spaces, expand your storage capacity, and create resilient data volumes. At least one volume needs to be created before _DISKSTATION_ services can be shared with users."
welcome_storage_title	=	"Storage Manager"
welcome_terms_of_service	=	"Privacy Statement"
welcome_title	=	"Welcome to DiskStation Manager!"
welcome_use_exist_account	=	"Create QuickConnect ID with an existing Synology Account"
welcome_use_exist_account_general	=	"Use an existing Synology Account"
welcome_user	=	"Create a User and assign privileges"
welcome_welcome_desc	=	"This wizard will guide you through the necessary _OSNAME_ settings."
welcome_welcome_title	=	"Welcome to _OSNAME_ Quick Start Wizard!"
what_is_syno_account	=	"What is a Synology Account?"
with_mobile_apps	=	"For mobile apps"
with_web_browsers	=	"For web browsers"
xa_migrate_desc	=	"The hard drives inserted in _DISKSTATION_ contain existing data and system settings. How would you like to handle them?"
xa_migrate_patch_version_not_enough	=	"Please use a patch with a version above {0}."
xa_migrate_title	=	"Select Installation Type"
xa_migrate_type_migration_desc	=	"Keep the files and most of the existing system settings. Please note that some settings will still be lost. For more details, refer to {0}this article{1}."
xa_migrate_type_migration_subtitle	=	"(Keep the files and most of the settings)"
xa_migrate_type_migration_title	=	"Retain system settings"
xa_migrate_type_reinstall_desc	=	"Keep the files only. Reset all system settings to default."
xa_migrate_type_reinstall_subtitle	=	"(Keep the files only)"
xa_migrate_type_reinstall_title	=	"Reset system settings"

[widget]
add_widget	=	"Select widgets"
add_widget_to_desktop	=	"Add to desktop"
apache_statup_failed	=	"_OSNAME_ cannot start up normally because it ran into a problem. Please contact the Synology support team for help."
attention_status	=	"Warning"
available_inode_full_warning	=	"The number of files in a volume is reaching the maximum limit. Please go to Storage Manager for more information."
available_volume_space_warning	=	"Running out of volume. Please add or replace drives to expand the volume capacity."
backup_status	=	"Status"
cancal_on_top	=	"Do not keep on top"
cpu_fan_fail	=	"The CPU fan of your _DISKSTATION_ has failed. Please contact your local retailer for assistance."
creating_volume	=	"Volume is being created."
danger_status	=	"Critical"
desc_ha_abnormal	=	"Please go to Synology High Availability for more information."
disk_health_status_error	=	"Drive status is abnormal. Please go to Storage Manager for more information."
disk_system_crashed	=	"Volume has crashed. Please go to "Storage Manager" for more info."
dock_leftbottom	=	"Bottom left"
dock_lefttop	=	"Top left"
dock_rightbottom	=	"Bottom right"
dock_righttop	=	"Top right"
dock_to	=	"Dock position"
eunit	=	"Expansion unit"
eunit_fan_fail	=	"The fan of Synology Expansion Unit has failed. Please contact your local retailer for assistance."
fan_fail	=	"The fan of your _DISKSTATION_ has failed. Please contact your local retailer for assistance."
file_change_log	=	"File Change Log"
good_status	=	"Healthy"
gpu_temperature_warning	=	"The temperature of your GPU is abnormally high. Please check your GPU status."
hdd_smart_status_error	=	"There are errors in S.M.A.R.T. status check. Please check your disks as soon as possible."
host	=	"_DISKSTATION_"
initial_status	=	"Initializing..."
is_system_crashed	=	"System partition has crashed. Please go to Storage Manager for more information."
item_title_tootip	=	"Click to open"
last_backup	=	"Last Backup"
link_fail	=	"Connection error"
more_failed	=	"{0} backup tasks failed."
more_next	=	"{0} upcoming backup tasks."
more_ongoing	=	"{0} backup tasks are ongoing."
more_partial	=	"{0} backup tasks completed with minor exceptions."
next_backup	=	"Next Backup"
no_active_log	=	"No active logs"
no_backup	=	"There is no scheduled backup."
no_log_available	=	"No logs available"
ongoing_backup	=	"Ongoing Backup"
pgsql_startup_failed	=	"Database cannot start because disk space is insufficient. Please free up space and restart the system."
pgsql_upgrade_done	=	"Database upgrade complete. Related services and packages can be started now."
pgsql_upgrade_fail	=	"System database upgrade was unsuccessful. Your original database has been retained. Please contact Synology Technical Support if you need to recover it. A new system database has been added as an alternative for related services or packages."
pgsql_upgrade_timeout	=	"System is performing database upgrade. Related services and packages may not be available now."
plz_add_widget	=	"Click the + button to add widgets"
power_fail	=	"One of the power supply of your _DISKSTATION_ has failed. Please check the PSU."
recentlog_title	=	"Recent Logs"
schedule_backup	=	"Scheduled Backup"
scheduler_title	=	"Scheduled Tasks"
storage_is_danger	=	"The system is now in critical status. Please go to Storage Manager for more information."
storage_is_warning	=	"The system is now in warning status. Please go to Storage Manager for more information."
sys_uptime	=	"Uptime"
system_ok	=	"Your _DISKSTATION_ is working well."
system_web_server_failed	=	"Some web pages can't function properly due to system web server error. Please contact Synology Technical Support for further assistance."
temperature_warning	=	"The temperature of your _DISKSTATION_ is abnormally high. Please check your room temperature."
usb_available_inode_full_warning	=	"The file count on your system partition is reaching the limit. Please contact Synology support for help."
usb_available_volume_space_warning	=	"Your system partition is running out of space."
usb_ups_status_battery	=	"Your _DISKSTATION_ is running on UPS battery power. Please check the power source."
usb_ups_status_low_batt	=	"The UPS battery is running low. Please check the power source."
volume_crashed	=	"Volume has crashed. Please go to "Storage Manager" for more info."
volume_degraded	=	"Volume has degraded. Please go to "Storage Manager" for more info."
volume_ro	=	"Volume has become read-only. Please go to Storage Manager for more information."
widget_on_top	=	"Keep on top"
widget_schedule_no_task	=	"No Tasks"
widget_view	=	"Widgets"

[wireless_ap]
ap_80211n_spec	=	"When using 11n wireless mode, the data transfer rate will be limited to 54 Mbps if WEP or TKIP is enabled. To allow faster transfer speeds, choose a WPA security protocol."
ap_advanced_qos_wmm_err	=	"Failed to enable WMM QoS."
ap_advanced_qos_wmm_switch	=	"Enable WMM QoS"
ap_advanced_setting	=	"Advanced settings"
ap_assoc_list	=	"Device List"
ap_assoc_list_hostname	=	"Hostname"
ap_assoc_list_ip	=	"IP Address"
ap_assoc_list_kick	=	"Disconnect"
ap_assoc_list_mac	=	"MAC Address"
ap_assoc_list_mac_filter	=	"Add to MAC Filter List"
ap_assoc_list_mac_filter_existed	=	"The Wi-Fi device already exists on MAC filter list."
ap_assoc_list_mac_filter_hint	=	"MAC address filter will be enabled to deny Wi-Fi devices from connecting."
ap_assoc_list_summary	=	"Connection List Summary"
ap_assoc_list_time	=	"Connection Time"
ap_auth_server_desc	=	"Enter authentication server information"
ap_auth_server_ip	=	"IP address"
ap_auth_server_port	=	"Port number"
ap_auth_server_shared_secret	=	"Shared secret"
ap_channel	=	"Channel"
ap_channel_width	=	"Channel width"
ap_client_name	=	"Client Name"
ap_client_time_control	=	"Parental Control"
ap_country_code	=	"Geocode"
ap_country_code_AE	=	"UNITED ARAB EMIRATES"
ap_country_code_AL	=	"ALBANIA"
ap_country_code_AM	=	"ARMENIA"
ap_country_code_AN	=	"NETHERLANDS ANTILLES"
ap_country_code_AR	=	"ARGENTINA"
ap_country_code_AT	=	"AUSTRIA"
ap_country_code_AU	=	"AUSTRALIA"
ap_country_code_AW	=	"ARUBA"
ap_country_code_AZ	=	"AZERBAIJAN"
ap_country_code_BA	=	"BOSNIA AND HERZEGOVINA"
ap_country_code_BB	=	"BARBADOS"
ap_country_code_BD	=	"BANGLADESH"
ap_country_code_BE	=	"BELGIUM"
ap_country_code_BG	=	"BULGARIA"
ap_country_code_BH	=	"BAHRAIN"
ap_country_code_BL	=	"SAINT BARTHELEMY"
ap_country_code_BN	=	"BRUNEI DARUSSALAM"
ap_country_code_BO	=	"BOLIVIA"
ap_country_code_BR	=	"BRAZIL"
ap_country_code_BY	=	"BELARUS"
ap_country_code_BZ	=	"BELIZE"
ap_country_code_CA	=	"CANADA"
ap_country_code_CH	=	"SWITZERLAND"
ap_country_code_CL	=	"CHILE"
ap_country_code_CN	=	"CHINA"
ap_country_code_CO	=	"COLOMBIA"
ap_country_code_CR	=	"COSTA RICA"
ap_country_code_CS	=	"SERBIA AND MONTENEGRO"
ap_country_code_CY	=	"CYPRUS"
ap_country_code_CZ	=	"CZECH REPUBLIC"
ap_country_code_DE	=	"GERMANY"
ap_country_code_DK	=	"DENMARK"
ap_country_code_DO	=	"DOMINICAN REPUBLIC"
ap_country_code_DZ	=	"ALGERIA"
ap_country_code_EC	=	"ECUADOR"
ap_country_code_EE	=	"ESTONIA"
ap_country_code_EG	=	"EGYPT"
ap_country_code_ES	=	"SPAIN"
ap_country_code_FI	=	"FINLAND"
ap_country_code_FR	=	"FRANCE"
ap_country_code_GB	=	"UNITED KINGDOM"
ap_country_code_GD	=	"GUADELOUPE"
ap_country_code_GE	=	"GEORGIA"
ap_country_code_GL	=	"GREENLAND"
ap_country_code_GR	=	"GREECE"
ap_country_code_GT	=	"GUATEMALA"
ap_country_code_GU	=	"GUAM"
ap_country_code_HK	=	"HONG KONG"
ap_country_code_HN	=	"HONDURAS"
ap_country_code_HR	=	"CROATIA"
ap_country_code_HT	=	"HAITI"
ap_country_code_HU	=	"HUNGARY"
ap_country_code_ID	=	"INDONESIA"
ap_country_code_IE	=	"IRELAND"
ap_country_code_IL	=	"ISRAEL"
ap_country_code_IN	=	"INDIA"
ap_country_code_IR	=	"IRAN"
ap_country_code_IS	=	"ICELAND"
ap_country_code_IT	=	"ITALY"
ap_country_code_JM	=	"JAMAICA"
ap_country_code_JO	=	"JORDAN"
ap_country_code_JP	=	"JAPAN"
ap_country_code_KE	=	"KENYA"
ap_country_code_KH	=	"CAMBODIA"
ap_country_code_KP	=	"NORTH KOREA"
ap_country_code_KR	=	"KOREA REPUBLIC"
ap_country_code_KW	=	"KUWAIT"
ap_country_code_KZ	=	"KAZAKHSTAN"
ap_country_code_LB	=	"LEBANON"
ap_country_code_LI	=	"LIECHTENSTEIN"
ap_country_code_LK	=	"SRI LANKA"
ap_country_code_LT	=	"LITHUANIA"
ap_country_code_LU	=	"LUXEMBOURG"
ap_country_code_LV	=	"LATVIA"
ap_country_code_MA	=	"MOROCCO"
ap_country_code_MC	=	"MONACO"
ap_country_code_MK	=	"MACEDONIA"
ap_country_code_MO	=	"MACAO"
ap_country_code_MT	=	"MALTA"
ap_country_code_MX	=	"MEXICO"
ap_country_code_MY	=	"MALAYSIA"
ap_country_code_NL	=	"NETHERLANDS"
ap_country_code_NO	=	"NORWAY"
ap_country_code_NP	=	"NEPAL"
ap_country_code_NZ	=	"NEW ZEALAND"
ap_country_code_OM	=	"OMAN"
ap_country_code_PA	=	"PANAMA"
ap_country_code_PE	=	"PERU"
ap_country_code_PG	=	"PAPUA NEW GUINEA"
ap_country_code_PH	=	"PHILIPPINES"
ap_country_code_PK	=	"PAKISTAN"
ap_country_code_PL	=	"POLAND"
ap_country_code_PR	=	"PUERTO RICO"
ap_country_code_PT	=	"PORTUGAL"
ap_country_code_QA	=	"QATAR"
ap_country_code_RO	=	"ROMANIA"
ap_country_code_RU	=	"RUSSIAN FEDERATION"
ap_country_code_SA	=	"SAUDI ARABIA"
ap_country_code_SE	=	"SWEDEN"
ap_country_code_SG	=	"SINGAPORE"
ap_country_code_SI	=	"SLOVENIA"
ap_country_code_SK	=	"SLOVAKIA"
ap_country_code_SV	=	"EL SALVADOR"
ap_country_code_SY	=	"SYRIAN ARAB REPUBLIC"
ap_country_code_TH	=	"THAILAND"
ap_country_code_TN	=	"TUNISIA"
ap_country_code_TR	=	"TURKEY"
ap_country_code_TT	=	"TRINIDAD AND TOBAGO"
ap_country_code_TW	=	"TAIWAN"
ap_country_code_UA	=	"UKRAINE"
ap_country_code_US	=	"UNITED STATES"
ap_country_code_UY	=	"URUGUAY"
ap_country_code_UZ	=	"UZBEKISTAN"
ap_country_code_VE	=	"VIET NAM"
ap_country_code_VN	=	"VENEZUELA"
ap_country_code_YE	=	"YEMEN"
ap_country_code_ZA	=	"SOUTH AFRICA"
ap_country_code_ZW	=	"ZIMBABWE"
ap_device	=	"Wireless device(s)"
ap_dongle_no_support	=	"No Wi-Fi adapter supporting this mode is detected."
ap_enable_wps	=	"Enable WPS"
ap_encrypt_open	=	"Open"
ap_encrypt_wep	=	"WEP"
ap_encrypt_wpa2_psk	=	"WPA2-PSK"
ap_encrypt_wpa_psk	=	"WPA-PSK"
ap_encryption	=	"Enable wireless security"
ap_general_setting	=	"General Settings"
ap_general_wifi_auto_channel	=	"Auto channel selection"
ap_general_wifi_err	=	"Failed to enable wireless radio."
ap_general_wifi_switch	=	"Enable wireless radio"
ap_guest_access_rule_desc	=	"Allow guest network clients to access the following"
ap_guest_allow_http_https_only	=	"Websites with ports 80 and 443 (default HTTP and HTTPS ports) only"
ap_guest_allow_lan_access	=	"Devices on the local host network"
ap_guest_ap_non_isolate	=	"Other devices on the guest network"
ap_guest_enable_schedule_plan	=	"Enable guest network schedule"
ap_guest_enable_ssid	=	"Enable guest network"
ap_guest_network	=	"Guest Network"
ap_guest_network_off	=	"Guest network off"
ap_guest_network_on	=	"Guest network on"
ap_guest_network_schedule_plan	=	"Guest Network Schedule"
ap_guest_set_schedule	=	"Set guest schedule"
ap_guest_ssid_duplicate	=	"The host and guest wireless networks must have different names. Please enter a new name."
ap_hotspot_subnet_overlap	=	"The subnet settings of the wireless network  conflict with those of the local network."
ap_intr	=	"Enable Hotspot to allow wireless devices to connect to a wired network using Wi-Fi technology"
ap_mac_filter_desc	=	"Description"
ap_mac_filter_err	=	"Failed to enable MAC filter."
ap_mac_filter_mac	=	"MAC address"
ap_mac_filter_mac_err	=	"Please input the correct MAC address"
ap_mac_filter_mac_used	=	"The MAC address already exists."
ap_mac_filter_policy	=	"Access policy"
ap_mac_filter_setting	=	"MAC Filter"
ap_mac_filter_siwtch	=	"Enable MAC filter"
ap_mac_filter_summary	=	"Summary"
ap_mode	=	"Wireless mode"
ap_mode_80211	=	"11{0}"
ap_mode_80211_mixed	=	"11{0}+11{1}"
ap_security_mode	=	"Security Mode"
ap_security_setting	=	"Security Settings"
ap_set_schedule	=	"Set Schedule"
ap_ssid	=	"Name (SSID)"
ap_ssid_hide	=	"Hide"
ap_ssid_limit_alert	=	"The max characters have been reached."
ap_sside_show	=	"Show"
ap_support_condition	=	"Please insert a USB Wi-Fi adapter."
ap_symbol	=	"Wi-Fi"
ap_time_ctrl_allow	=	"Allowed"
ap_time_ctrl_desc	=	"Parental control allows you to control when each client device can access the Internet."
ap_time_ctrl_disallow	=	"Blocked"
ap_time_ctrl_error	=	"There should be at least one rule"
ap_time_ctrl_setup	=	"Parental Control"
ap_time_ctrl_switch	=	"Enable parental control"
ap_tx_power	=	"Transmit power"
ap_txpower_high	=	"High"
ap_txpower_low	=	"Low"
ap_txpower_middle	=	"Middle"
ap_width_20MHz	=	"20MHz"
ap_width_20_40MHz	=	"20/40MHz"
ap_wifi_Off	=	"Wi-Fi off"
ap_wifi_On	=	"Wi-Fi on"
ap_wifi_off	=	"Wi-Fi off"
ap_wifi_on	=	"Wi-Fi on"
ap_wpa_encryption_AES	=	"AES"
ap_wpa_encryption_TKIP	=	"TKIP"
ap_wpa_encryption_TKIP_AES	=	"TKIP + AES"
ap_wpa_type	=	"Type"
ap_wpa_type_enterprise	=	"WPA/WPA2 Enterprise"
ap_wpa_type_mixed	=	"WPA/WPA2 Mixed"
ap_wpa_type_personal	=	"WPA/WPA2 Personal"
ap_wpa_type_wpa	=	"WPA"
ap_wpa_type_wpa2	=	"WPA2"
ap_wps_desc	=	"WPS (Wi-Fi Protected Setup) shares the wireless key between your _DISKSTATION_ and wireless clients, providing an easy and secure way to establish a wireless network."
ap_wps_err	=	"Failed to enable Wi-Fi Protected Setup."
ap_wps_instruction	=	"Choose one of the methods below to connect your wireless device using Wi-Fi Protected Setup."
ap_wps_pbc_desc	=	"Click the Start PBC button to keep your Wi-Fi network safe. Please press the button with the same capability on your wireless client device within two minutes."
ap_wps_pbc_execute	=	"Start PBC"
ap_wps_pbc_guide	=	"If your wireless device has a Wi-Fi Protected Setup button, click or press that button and then click the button below."
ap_wps_pbc_instruction	=	"Please connect to your _DISKSTATION_ using WPS on your wireless device within 2 minutes."
ap_wps_pbc_title	=	"Push Button"
ap_wps_pin_desc	=	"Enter the PIN of your wireless client device and click the Start PIN button to keep your Wi-Fi network safe."
ap_wps_pin_err	=	"Enter PIN"
ap_wps_pin_execute	=	"Start PIN"
ap_wps_pin_guide	=	"If your wireless device has a Wi-Fi Protected Setup PIN number, enter that number below and then click Register."
ap_wps_pin_register	=	"Register"
ap_wps_pin_title	=	"Device PIN"
ap_wps_setting	=	"WPS"
ap_wps_switch	=	"Enable WPS"
bridge_mode_forbidden	=	"LAN 1 cannot be bonded with other network interfaces if you would like to use Wireless AP."
bridge_mode_not_support_for_ovs	=	"AP mode is not supported when {0} is running."
connection_notify	=	"Supports up to 256 clients. Multiple concurrent connections might affect the connection quality."
country_code_desc	=	"Select your current location to ensure full functionality of your wireless device."
country_code_get_fail	=	"Failed to get geocode."
country_code_hint	=	"Please choose your location at Control Panel > Regional Options > Time > Time Zone to ensure full functionality of your hotspot."
country_code_notify	=	"For full functionality on your wireless devices, please click OK to configure your location settings."
country_code_read_key_fail	=	"Failed to read geocode key."
country_code_read_list_fail	=	"Failed to read geocode list."
country_code_region_not_support	=	"Geocode does not support this region."
country_code_set_fail	=	"Failed to set geocode."
country_code_set_key_fail	=	"Failed to set geocode key."
country_code_warning	=	"Wrong location setting might lead to legal issues."
enable_ap	=	"Enable hotspot"
max_sta_num	=	"Max connections"
max_sta_num_tip	=	"(1 ~ 256 Clients)"
unlimited	=	"Unlimited"

[wizard]
desc_system_dr_not_supported	=	"High Availability is not compatible with Disaster Recovery. Please stop Disaster Recovery and try again."
error_ntpserver	=	"Error occurred while applying wizard step 3. The entered IP address or server name for the network time server is invalid. Please try again."
passwd_passwd	=	"Password"
passwd_verifypw	=	"Confirm Password"
wizard_DHCP	=	"Get network configuration automatically (DHCP)"
wizard_apply_err1	=	"Error occurred while applying wizard step 1. Failed to set server name. Please try again."
wizard_apply_err10	=	"Error occurred while applying wizard step 1. Failed to verify the admin's password. Please try again."
wizard_apply_err2	=	"Error occurred while applying wizard step 1. Failed to set admin's password. Please try again."
wizard_apply_err3	=	"Error occurred while applying wizard step 3. Failed to set time zone. Please try again."
wizard_apply_err4	=	"Error occurred while applying wizard step 3. Failed to set NTP (network time protocol) Information. Please try again."
wizard_apply_err5	=	"Error occurred while applying wizard step 3. Failed to set date or time. Please try again."
wizard_apply_err6	=	"Error occurred while applying wizard step 4. Failed to set workgroup. Please try again."
wizard_apply_err7	=	"Error occurred while applying wizard step 4. Failed to set AppleTalk Zone. Please try again."
wizard_apply_err8	=	"Error occurred while applying wizard step 4. Failed to read settings of code page. Please try again."
wizard_apply_err9	=	"Error occurred while applying wizard step 4. Failed to set code page. Please try again."
wizard_cfmStart	=	"Are you sure you want to finish the settings?"
wizard_codepage	=	"Encoding setting"
wizard_cptitle	=	"code page"
wizard_enterpwd	=	"Please enter the admin password."
wizard_entersvr	=	"Please enter the server name."
wizard_err1	=	"Failed to create a configuration file."
wizard_err3	=	"Failed to read the configuration file. Please try again later."
wizard_manual	=	"Use manual configuration"
wizard_run	=	"Run Wizard"
wizard_step1	=	"System"
wizard_step2	=	"LAN"
wizard_step3	=	"Time"
wizard_steps	=	"Steps"
wizard_svrname	=	"Server Name"
wizard_title	=	"Setup Wizard"

[wizcommon]
applystep_title	=	"Apply settings"
empty_favorite	=	"Empty"
fav_itemno	=	"{0}/{1} favorite items"
fav_left	=	"Shift to left"
fav_prompt	=	"Drag and drop your favorite modules here."
fav_remove	=	"Remove from My Favorites"
fav_right	=	"Shift to right"
fav_title	=	"My Favorites"
launch_inetwiz	=	"Launch the Internet Access Wizard"
listall_func	=	"Complete Mode"
share_na	=	"No access to shared folder <b>{0}</b>"
share_readonly	=	"Read only to shared folder <b>{0}</b>"
share_writeable	=	"Read/Write to shared folder <b>{0}</b>"
summary	=	"Summary"
summary_descr	=	"The wizard will apply the following settings. The process will take a few seconds."
towizard_title	=	"Wizard Mode"
wizard_applydone	=	"Settings applied successfully."

[zram]
zram	=	"Memory Compression"
zram_confirm	=	"A reboot is required for Memory Compression settings to take effect. Would you like to reboot now?"
zram_enable	=	"Enable Memory Compression to improve system responsiveness"